- 20 Oct, 2020 1 commit
-
-
Anand Moon authored
Add reset external reset of the ethernet mac controller Signed-off-by:
Anand Moon <linux.amoon@gmail.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201020120141.298240-1-jbrunet@baylibre.com
-
- 05 Oct, 2020 4 commits
-
-
Martin Blumenstingl authored
We have a dedicated "amlogic,meson-g12a-dwmac" compatible string for the Ethernet controller since commit 3efdb924 ("dt-bindings: net: dwmac-meson: Add a compatible string for G12A onwards"). Using the AXG compatible string worked fine so far because the dwmac-meson8b driver doesn't handle the newly introduced register bits for G12A. However, once that changes the driver must be probed with the correct compatible string to manage these new register bits. Signed-off-by:
-
Scott K Logan authored
This adds the missing perpheral clock for the RNG for Amlogic G12. As stated in amlogic,meson-rng.yaml, this isn't always necessary for the RNG to function, but is better to have in case the clock is disabled for some reason prior to loading. Signed-off-by:
Scott K Logan <logans@cottsay.net> Suggested-by:
-
Neil Armstrong authored
This enables USB OTG on the S400 board. Signed-off-by:
-
Neil Armstrong authored
This adds the USB Glue node, with the USB2 & USB3 controllers along the single USB2 PHY node. Signed-off-by:
-
- 18 Sep, 2020 5 commits
-
-
Jerome Brunet authored
Add initial support for the libretech aml-s905x-cc (Le Potato) v2 Signed-off-by:
-
Jerome Brunet authored
Add support for the 2nd version of the libretch aml-s905x-cc. Signed-off-by:
-
Christian Hewitt authored
HardKernel ODROID-N2+ uses an Amlogic S922X rev. C chip capable of higher clock speeds than the original ODROID-N2. The rev. C support a slighly higher VDDCPU_A & VDDCPU_B voltages and supports the same OPPs as the Amlogic A311D SoC from the same G12B family. Suggested-by:
Dongjin Kim <tobetter@hardkernel.com> Signed-off-by:
Christian Hewitt <christianshewitt@gmail.com> Signed-off-by:
-
Christian Hewitt authored
HardKernel ODROID-N2+ uses a revised Amlogic S922X v2 chip that supports higher cpu clock speeds than the original ODROID-N2. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Christian Hewitt authored
Convert the current ODROID-N2 dts into a common dtsi in preparation for adding ODROID-N2+ support. Signed-off-by:
-
- 14 Sep, 2020 1 commit
-
-
Jerome Brunet authored
The sound card definition should have been removed when the common definition was added to the vim3 dtsi but this slips through. Remove it now. Fixes: 7c9c0624 ("arm64: dts: meson: vim3: make sound card common to all variants") Signed-off-by:
-
- 10 Aug, 2020 2 commits
-
-
Jerome Brunet authored
The vim3 sound card definition should be same all the vim3 variants Move the definition to the appropriate device tree file. Signed-off-by:
-
Jerome Brunet authored
The LEDs on the vim3 are active when the gpio is high, not low. Fixes: c6d29c66 ("arm64: dts: meson-g12b-khadas-vim3: add initial device-tree") Signed-off-by:
-
- 29 Jul, 2020 2 commits
-
-
Jerome Brunet authored
Add support for audio on jack socket of the odroid-n2 Signed-off-by:
-
Jerome Brunet authored
Add capture pcm interfaces and loopback routes to the odroid-n2 Signed-off-by:
-
- 27 Jul, 2020 2 commits
-
-
Christian Hewitt authored
Similar to other G12B devices using the W400 dtsi, I see reports of mmc0 tuning errors on VIM3 after a few hours uptime: [12483.917391] mmc0: tuning execution failed: -5 [30535.551221] mmc0: tuning execution failed: -5 [35359.953671] mmc0: tuning execution failed: -5 [35561.875332] mmc0: tuning execution failed: -5 [61733.348709] mmc0: tuning execution failed: -5 I do not see the same on VIM3L, so remove sd-uhs-sdr50 from the common dtsi to silence the error, then (re)add it to the VIM3L dts. Fixes: 4f26cc1c ("arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi") Fixes: 700ab8d8 ("arm64: dts: khadas-vim3: add support for the SM1 based VIM3L") Signed-off-by:
-
Christian Hewitt authored
Current devices using the W400 dtsi show mmc tuning errors: [12483.917391] mmc0: tuning execution failed: -5 [30535.551221] mmc0: tuning execution failed: -5 [35359.953671] mmc0: tuning execution failed: -5 [35561.875332] mmc0: tuning execution failed: -5 [61733.348709] mmc0: tuning execution failed: -5 Removing "sd-uhs-sdr50" from the SDIO node prevents this. We also add keep-power-in-suspend to the SDIO node and fix an indentation. Fixes: 3cb74db9 ("arm64: dts: meson: convert ugoos-am6 to common w400 dtsi") Signed-off-by:
-
- 21 Jul, 2020 8 commits
-
-
Martin Blumenstingl authored
Add the OPP table for the Mali Bifrost GPU and drop the hardcoded initial clock configuration. This enables GPU DVFS and thus saves power when the GPU is not in use while still being able switch to a higher clock on demand. Set the GP0_PLL clock to 744MHz (which is the only frequency which cannot be derived from the FCLK dividers) as the clock driver avoids setting the parent clock rates so the HIFI PLL clock isn't changed (as that's reserved for audio). Signed-off-by:
-
Martin Blumenstingl authored
Add the OPP table for the Mali-T820 GPU and drop the hardcoded initial clock configuration. This enables GPU DVFS and thus saves power when the GPU is not in use while still being able switch to a higher clock on demand. Signed-off-by:
-
Martin Blumenstingl authored
Add the OPP table for the Mali-450 GPU and drop the hardcoded initial clock configuration. This enables GPU DVFS and thus saves power when the GPU is not in use while still being able switch to a higher clock on demand. Set the GP0_PLL clock to 744MHz (which is the only frequency which cannot be derived from the FCLK dividers) as the clock driver avoids setting the parent clock rates so the MPLL clocks aren't changed (as these are reserved for audio). The only exception to this is the GXL S805X package because the 744MHz OPP isn't working correctly there. While here, make most of meson-gxl-mali re-usable to reduce the amount of duplicate code between GXBB and GXL. This is more important now as we don't want to duplicate the GPU OPP table. Signed-off-by:
-
Kevin Hilman authored
Amlogic fixes for v5.8-rc - misc DT fixes, and SoC ID fixes
-
Christian Hewitt authored
The WeTek Core2 is a commercial device based on the Amlogic Q200 reference design but with the following differences: - 3GB RAM, 32GB eMMC - Blue and Red LEDs used to signal on/off status - uart_AO can be accessed after opening the case; soldering required - USB OTG is not accessible (inside the case) - Realtek RTL8152 Ethernet (internal USB connection) Signed-off-by:
-
Christian Hewitt authored
The WeTek Core 2 is a commercial Android device based on the Amlogic Q200 reference design using the S912-H chipset. Specs: 3GB DDR3 RAM 32GB eMMC storage 10/100 Ethernet using Realtek RTL8152 (internal USB) 802.11 a/b/g/n/ac + BT 4.1 sdio wireless module (AP6356S) 2x single colour LEDs to indicate power 1x power button 1x reset button on the underside of the box HDMI 2.0 (4k@60p) video Composite video + 2-channel audio output on 3.5mm jack S/PDIF audio output 2x USB 2.0 ports 1x USB OTG port (internal) 1x micro SD card slot UART pins (internal) IR Sensor Signed-off-by:
-
Christian Hewitt authored
Add initial audio support limited to HDMI i2s, copying the config from the existing VIM3 device-tree. Signed-off-by:
-
Christian Hewitt authored
Add initial audio support limited to HDMI i2s. Signed-off-by:
-
- 20 Jul, 2020 1 commit
-
-
Christian Hewitt authored
The VIM3/VIM3L Boards use w25q128 not w25q32 - this is a cosmetic change only - the device probes fine with the current device-tree. Fixes: 0e1610e7 ("arm64: dts: khadas-vim3: add SPIFC controller node") Signed-off-by:
-
- 13 Jul, 2020 3 commits
-
-
Martin Blumenstingl authored
Add the "timing-adjustment" clock now that we know how it is connected to the PRG_ETHERNET registers. It is used internally to generate the RGMII RX delay on the MAC side (if needed). Signed-off-by:
-
Martin Blumenstingl authored
The "amlogic,meson-gx-pwrc-vpu" binding only supports the VPU power domain, while actually there are more power domains behind that set of registers. Switch to the new bindings so we can add more power domains as needed. Signed-off-by:
-
Neil Armstrong authored
Add the Khadas MCU node with active FAN thermal nodes for all the Khadas VIM3 variants. Signed-off-by:
Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200713065931.19845-1-narmstrong@baylibre.com
-
- 29 Jun, 2020 4 commits
-
-
Krzysztof Kozlowski authored
Fix dtschema validator warnings like: l2-cache-controller@c4200000: $nodename:0: 'l2-cache-controller@c4200000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by:Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Neil Armstrong authored
When starting at 744MHz, the Mali 450 core crashes on S805X based boards: lima d00c0000.gpu: IRQ ppmmu3 not found lima d00c0000.gpu: IRQ ppmmu4 not found lima d00c0000.gpu: IRQ ppmmu5 not found lima d00c0000.gpu: IRQ ppmmu6 not found lima d00c0000.gpu: IRQ ppmmu7 not found Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.2+ #492 Hardware name: Libre Computer AML-S805X-AC (DT) pstate: 40000005 (nZcv daif -PAN -UAO) pc : lima_gp_init+0x28/0x188 ... Call trace: lima_gp_init+0x28/0x188 lima_device_init+0x334/0x534 lima_pdev_probe+0xa4/0xe4 ... Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Reverting to a safer 666Mhz frequency on the S805X that doesn't use the GP0 PLL makes it more stable. Fixes: fd477164 ("ARM64: dts: add S805X based P241 board") Fixes: 0449b8e3 ("arm64: dts: meson: add libretech aml-s805x-ac board") Signed-off-by:
-
Jerome Brunet authored
The peripheral clock of the RNG is missing for gxl while it is present for gxbb. Fixes: 1b3f6d14 ("ARM64: dts: meson-gx: add clock CLKID_RNG0 to hwrng node") Signed-off-by:
-
Christian Hewitt authored
Correct the SoC revision and package bits/mask values for S905D3/X3 to detect a wider range of observed SoC IDs, and tweak sort order for A311D/S922X. S905X3 05 0000 0101 (SEI610 initial devices) S905X3 10 0001 0000 (ODROID-C4 and recent Android boxes) S905X3 50 0101 0000 (SEI610 later revisions) S905D3 04 0000 0100 (VIM3L devices in kernelci) S905D3 b0 1011 0000 (VIM3L initial production) Fixes commit c9cc9bec ("soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs") Suggested-by:
-
- 14 Jun, 2020 4 commits
-
-
Linus Torvalds authored
-
git://github.com/micah-morton/linuxLinus Torvalds authored
Pull SafeSetID update from Micah Morton: "Add additional LSM hooks for SafeSetID SafeSetID is capable of making allow/deny decisions for set*uid calls on a system, and we want to add similar functionality for set*gid calls. The work to do that is not yet complete, so probably won't make it in for v5.8, but we are looking to get this simple patch in for v5.8 since we have it ready. We are planning on the rest of the work for extending the SafeSetID LSM being merged during the v5.9 merge window" * tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux: security: Add LSM hooks to set*gid syscalls
-
Thomas Cedeno authored
The SafeSetID LSM uses the security_task_fix_setuid hook to filter set*uid() syscalls according to its configured security policy. In preparation for adding analagous support in the LSM for set*gid() syscalls, we add the requisite hook here. Tested by putting print statements in the security_task_fix_setgid hook and seeing them get hit during kernel boot. Signed-off-by:
Thomas Cedeno <thomascedeno@google.com> Signed-off-by:
Micah Morton <mortonm@chromium.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "This reverts the direct io port to iomap infrastructure of btrfs merged in the first pull request. We found problems in invalidate page that don't seem to be fixable as regressions or without changing iomap code that would not affect other filesystems. There are four reverts in total, but three of them are followup cleanups needed to revert a43a67a2 cleanly. The result is the buffer head based implementation of direct io. Reverts are not great, but under current circumstances I don't see better options" * tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Revert "btrfs: switch to iomap_dio_rw() for dio" Revert "fs: remove dio_end_io()" Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK" Revert "btrfs: split btrfs_direct_IO to read and write part"
-
- 13 Jun, 2020 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ... -
David Sterba authored
This reverts commit a43a67a2. This patch reverts the main part of switching direct io implementation to iomap infrastructure. There's a problem in invalidate page that couldn't be solved as regression in this development cycle. The problem occurs when buffered and direct io are mixed, and the ranges overlap. Although this is not recommended, filesystems implement measures or fallbacks to make it somehow work. In this case, fallback to buffered IO would be an option for btrfs (this already happens when direct io is done on compressed data), but the change would be needed in the iomap code, bringing new semantics to other filesystems. Another problem arises when again the buffered and direct ios are mixed, invalidation fails, then -EIO is set on the mapping and fsync will fail, though there's no real error. There have been discussions how to fix that, but revert seems to be the least intrusive option. Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/Signed-off-by:
David Sterba <dsterba@suse.com>
-
Grygorii Strashko authored
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow unregistered mcast packets to pass. This happens, because ALE VLAN entries on these SoCs do not contain port masks for reg/unreg mcast packets, but instead store indexes of ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for reg/unreg mcast packets. This path was missed by commit 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled"). Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti(). Fixes: 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
