Refactor libbpf's BTF fixup step during BPF object open phase. The only
functional change is that we now ignore BTF_VAR_GLOBAL_EXTERN variables
during fix up, not just BTF_VAR_STATIC ones, which shouldn't cause any
change in behavior as there shouldn't be any extern variable in data
sections for valid BPF object anyways.

Otherwise it's just collapsing two functions that have no reason to be
separate, and switching find_elf_var_offset() helper to return entire
symbol pointer, not just its offset. This will be used by next patch to
get ELF symbol visibility.

While refactoring, also "normalize" debug messages inside
btf_fixup_datasec() to follow general libbpf style and print out data
section name consistently, where it's available.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221019002816.359650-2-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This change adds a brief summary of the BPF continuous integration (CI)
to the BPF selftest documentation. The summary focuses not so much on
actual workings of the CI, as it is maintained outside of the
repository, but aims to document the few bits of it that are sourced
from this repository and that developers may want to adjust as part of
patch submissions: the BPF kernel configuration and the deny list
file(s).

Changelog:
- v1->v2:
  - use s390x instead of s390 for consistency
Signed-off-by: Daniel Müller <deso@posteo.net>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221018164015.1970862-1-deso@posteo.netSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

This change fixes some typos found in the BPF samples README file.
Signed-off-by: Daniel Müller <deso@posteo.net>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221018163231.1926462-1-deso@posteo.netSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Remove the repeated word "by" in comments.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Link: https://lore.kernel.org/r/20221017142303.8299-1-dengshaomin@cdjrlc.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

xdp2_kern rewrites and forwards packets out on the same interface.
Forwarding still works but rewrite got broken when xdp multibuffer
support has been added.

With xdp multibuffer a local copy of the packet has been introduced. The
MAC address is now swapped in the local copy, but the local copy in not
written back.

Fix MAC address swapping be adding write back of modified packet.

Fixes: 77225174 ("samples/bpf: fixup some tools to be able to support xdp multibuffer")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Link: https://lore.kernel.org/r/20221015213050.65222-1-gerhard@engleder-embedded.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

BPF map iteration in xdp1_user results in endless loop without any
output, because the return value of bpf_map_get_next_key() is checked
against the wrong value.

Other call locations of bpf_map_get_next_key() check for equal 0 for
continuing the iteration. xdp1_user checks against unequal -1. This is
wrong for a function which can return arbitrary negative errno values,
because a return value of e.g. -2 results in an endless loop.

With this fix xdp1_user is printing statistics again:
proto 0:          1 pkt/s
proto 0:          1 pkt/s
proto 17:     107383 pkt/s
proto 17:     881655 pkt/s
proto 17:     882083 pkt/s
proto 17:     881758 pkt/s

Fixes: bd054102 ("libbpf: enforce strict libbpf 1.0 behaviors")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221013200922.17167-1-gerhard@engleder-embedded.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

No need to use more than one SPI transfer for reads.
Use only one from now as ADIN1110/2111 does not tolerate
CS changes during reads.

The BCM2711/2708 SPI controllers worked fine, but the NXP
IMX8MM could not keep CS lowered during SPI bursts.

This change aims to make the ADIN1110/2111 driver compatible
with both SPI controllers, without any loss of bandwidth/other
capabilities.

Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
bridge: A few multicast cleanups

Clean up a few issues spotted while working on the bridge multicast code
and running its selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Before creating a new MDB entry, br_multicast_new_group() will call
br_mdb_ip_get() to see if one exists and return it if so.

Therefore, simply call br_multicast_new_group() and omit the call to
br_mdb_ip_get().
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

IGMPv3 / MLDv2 Membership Reports are only processed from the data path
with softIRQ disabled, so there is no need to call spin_lock_bh(). Use
spin_lock() instead.

This is consistent with how other IGMP / MLD packets are processed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The test group address is added and removed in v2reportleave_test().
There is no need to delete it again during cleanup as it results in the
following error message:

 # bash -x ./bridge_igmp.sh
 [...]
 + cleanup
 + pre_cleanup
 [...]
 + ip address del dev swp4 239.10.10.10/32
 RTNETLINK answers: Cannot assign requested address
 + h2_destroy

Solve by removing the unnecessary address deletion.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The qdiscs are added during setup, but not deleted during cleanup,
resulting in the following error messages:

 # ./bridge_vlan_mcast.sh
 [...]
 # ./bridge_vlan_mcast.sh
 Error: Exclusivity flag on, cannot modify.
 Error: Exclusivity flag on, cannot modify.

Solve by deleting the qdiscs during cleanup.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sean Anderson says:

====================
net: dpaa: Convert to phylink

This series converts the DPAA driver to phylink.

I have tried to maintain backwards compatibility with existing device
trees whereever possible. However, one area where I was unable to
achieve this was with QSGMII. Please refer to patch 2 for details.

All mac drivers have now been converted. I would greatly appreciate if
anyone has T-series or P-series boards they can test/debug this series
on. I only have an LS1046ARDB. Everything but QSGMII should work without
breakage; QSGMII needs patches 7 and 8. For this reason, the last 4
patches in this series should be applied together (and should not go
through separate trees).

Changes in v7:
- provide phylink_validate_mask_caps() helper
- Fix oops if memac_pcs_create returned -EPROBE_DEFER
- Fix using pcs-names instead of pcs-handle-names
- Fix not checking for -ENODATA when looking for sgmii pcs
- Fix 81-character line
- Simplify memac_validate with phylink_validate_mask_caps

Changes in v6:
- Remove unnecessary $ref from renesas,rzn1-a5psw
- Remove unnecessary type from pcs-handle-names
- Add maxItems to pcs-handle
- Fix 81-character line
- Fix uninitialized variable in dtsec_mac_config

Changes in v5:
- Add Lynx PCS binding

Changes in v4:
- Use pcs-handle-names instead of pcs-names, as discussed
- Don't fail if phy support was not compiled in
- Split off rate adaptation series
- Split off DPAA "preparation" series
- Split off Lynx 10G support
- t208x: Mark MAC1 and MAC2 as 10G
- Add XFI PCS for t208x MAC1/MAC2

Changes in v3:
- Expand pcs-handle to an array
- Add vendor prefix 'fsl,' to rgmii and mii properties.
- Set maxItems for pcs-names
- Remove phy-* properties from example because dt-schema complains and I
  can't be bothered to figure out how to make it work.
- Add pcs-handle as a preferred version of pcsphy-handle
- Deprecate pcsphy-handle
- Remove mii/rmii properties
- Put the PCS mdiodev only after we are done with it (since the PCS
  does not perform a get itself).
- Remove _return label from memac_initialization in favor of returning
  directly
- Fix grabbing the default PCS not checking for -ENODATA from
  of_property_match_string
- Set DTSEC_ECNTRL_R100M in dtsec_link_up instead of dtsec_mac_config
- Remove rmii/mii properties
- Replace 1000Base... with 1000BASE... to match IEEE capitalization
- Add compatibles for QSGMII PCSs
- Split arm and powerpcs dts updates

Changes in v2:
- Better document how we select which PCS to use in the default case
- Move PCS_LYNX dependency to fman Kconfig
- Remove unused variable slow_10g_if
- Restrict valid link modes based on the phy interface. This is easier
  to set up, and mostly captures what I intended to do the first time.
  We now have a custom validate which restricts half-duplex for some SoCs
  for RGMII, but generally just uses the default phylink validate.
- Configure the SerDes in enable/disable
- Properly implement all ethtool ops and ioctls. These were mostly
  stubbed out just enough to compile last time.
- Convert 10GEC and dTSEC as well
- Fix capitalization of mEMAC in commit messages
- Add nodes for QSGMII PCSs
- Add nodes for QSGMII PCSs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we actually read registers from QSGMII PCSs, it's important
that we have the correct address (instead of hoping that we're the MAC
with all the QSGMII PCSs on its bus). This adds nodes for the QSGMII
PCSs.  The exact mapping of QSGMII to MACs depends on the SoC.

Since the first QSGMII PCSs share an address with the SGMII and XFI
PCSs, we only add new nodes for PCSs 2-4. This avoids address conflicts
on the bus.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we actually read registers from QSGMII PCSs, it's important
that we have the correct address (instead of hoping that we're the MAC
with all the QSGMII PCSs on its bus). This adds nodes for the QSGMII
PCSs. They have the same addresses on all SoCs (e.g. if QSGMIIA is
present it's used for MACs 1 through 4).

Since the first QSGMII PCSs share an address with the SGMII and XFI
PCSs, we only add new nodes for PCSs 2-4. This avoids address conflicts
on the bus.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On the T208X SoCs, MAC1 and MAC2 support XGMII. Add some new MAC dtsi
fragments, and mark the QMAN ports as 10G.

Fixes: da414bb9 ("powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s)")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This converts DPAA to phylink. All macs are converted. This should work
with no device tree modifications (including those made in this series),
except for QSGMII (as noted previously).

The mEMAC configuration is one of the tricker areas. I have tried to
capture all the restrictions across the various models. Most of the time,
we assume that if the serdes supports a mode or the phy-interface-mode
specifies it, then we support it. The only place we can't do this is
(RG)MII, since there's no serdes. In that case, we rely on a (new)
devicetree property. There are also several cases where half-duplex is
broken. Unfortunately, only a single compatible is used for the MAC, so we
have to use the board compatible instead.

The 10GEC conversion is very straightforward, since it only supports XAUI.
There is generally nothing to configure.

The dTSEC conversion is broadly similar to mEMAC, but is simpler because we
don't support configuring the SerDes (though this can be easily added) and
we don't have multiple PCSs. From what I can tell, there's nothing
different in the driver or documentation between SGMII and 1000BASE-X
except for the advertising. Similarly, I couldn't find anything about
2500BASE-X. In both cases, I treat them like SGMII. These modes aren't used
by any in-tree boards. Similarly, despite being mentioned in the driver, I
couldn't find any documented SoCs which supported QSGMII.  I have left it
unimplemented for now.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Although not stated in the datasheet, as far as I can tell PCS for mEMACs
is a "Lynx." By reusing the existing driver, we can remove the PCS
management code from the memac driver. This requires calling some PCS
functions manually which phylink would usually do for us, but we will let
it do that soon.

One problem is that we don't actually have a PCS for QSGMII. We pretend
that each mEMAC's MDIO bus has four QSGMII PCSs, but this is not the case.
Only the "base" mEMAC's MDIO bus has the four QSGMII PCSs. This is not an
issue yet, because we never get the PCS state. However, it will be once the
conversion to phylink is complete, since the links will appear to never
come up. To get around this, we allow specifying multiple PCSs in pcsphy.
This breaks backwards compatibility with old device trees, but only for
QSGMII. IMO this is the only reasonable way to figure out what the actual
QSGMII PCS is.

Additionally, we now also support a separate XFI PCS. This can allow the
SerDes driver to set different addresses for the SGMII and XFI PCSs so they
can be accessed at the same time.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds support for using a serdes which has to be configured. This is
primarly in preparation for phylink conversion, which will then change the
serdes mode dynamically.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Provide a helper that restricts the link modes according to the
phylink capabilities.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[rebased on net-next/master and added documentation]
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

At the moment, mEMACs are configured almost completely based on the
phy-connection-type. That is, if the phy interface is RGMII, it assumed
that RGMII is supported. For some interfaces, it is assumed that the
RCW/bootloader has set up the SerDes properly. This is generally OK, but
restricts runtime reconfiguration. The actual link state is never
reported.

To address these shortcomings, the driver will need additional
information. First, it needs to know how to access the PCS/PMAs (in
order to configure them and get the link status). The SGMII PCS/PMA is
the only currently-described PCS/PMA. Add the XFI and QSGMII PCS/PMAs as
well. The XFI (and 10GBASE-KR) PCS/PMA is a c45 "phy" which sits on the
same MDIO bus as SGMII PCS/PMA. By default they will have conflicting
addresses, but they are also not enabled at the same time by default.
Therefore, we can let the XFI PCS/PMA be the default when
phy-connection-type is xgmii. This will allow for
backwards-compatibility.

QSGMII, however, cannot work with the current binding. This is because
the QSGMII PCS/PMAs are only present on one MAC's MDIO bus. At the
moment this is worked around by having every MAC write to the PCS/PMA
addresses (without checking if they are present). This only works if
each MAC has the same configuration, and only if we don't need to know
the status. Because the QSGMII PCS/PMA will typically be located on a
different MDIO bus than the MAC's SGMII PCS/PMA, there is no fallback
for the QSGMII PCS/PMA.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This binding is fairly bare-bones for now, since the Lynx driver doesn't
parse any properties (or match based on the compatible). We just need it
in order to prevent the PCS nodes from having phy devices attached to
them. This is not really a problem, but it is a bit inefficient.

This binding is really for three separate PCSs (SGMII, QSGMII, and XFI).
However, the driver treats all of them the same. This works because the
SGMII and XFI devices typically use the same address, and the SerDes
driver (or RCW) muxes between them. The QSGMII PCSs have the same
register layout as the SGMII PCSs. To do things properly, we'd probably
do something like

	ethernet-pcs@0 {
		#pcs-cells = <1>;
		compatible = "fsl,lynx-pcs";
		reg = <0>, <1>, <2>, <3>;
	};

but that would add complexity, and we can describe the hardware just
fine using separate PCSs for now.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows multiple phandles to be specified for pcs-handle, such as
when multiple PCSs are present for a single MAC. To differentiate
between them, also add a pcs-handle-names property.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michał Grzelak says:

====================
net: further improvements to marvell,pp2.yaml

This patchset addresses problems with reg ranges and
additional $refs. It also limits phy-mode and aligns examples.

Best regards,
Michał

---
Changelog:
v4->v5
- drop '+' from all patternProperties
- restrict range of patternProperties to [0-2] in top level
- drop the $ref in patternProperties:'^...':properties:reg
- add patternProperties:'^...':properties:reg:maximum:2
- drop $ref in patternProperties:'^...':properties:phys
- add patternProperties:'^...':properties:phys:maxItems:1
- limit phy-mode to the subset found in dts files
- reflect the order of subnodes' properties in subnodes' required:
- restrict range of pattern to [0-2] in marvell,armada-7k-pp22 case
- restrict range of pattern to [0-1] in marvell,armada-375-pp2 case
- align to 4 spaces all examples:
- add specified maximum to allOf:if:then-else:properties:reg

v3->v4
- change commit message of first patch
- move allOf:$ref to patternProperties:'^...':$ref
- deprecate port-id in favour of reg
- move reg to front of properties list in patternProperties
- reflect the order of properties in required list in
  patternProperties
- add unevaluatedProperties: false to patternProperties
- change unevaluated- to additionalProperties at top level
- add property phys: to ports subnode
- extend example binding with additional information about phys and sfp
- hook phys property to phy-consumer.yaml schema

v2->v3
- move 'reg:description' to 'allOf:if:then'
- change '#size-cells: true' and '#address-cells: true'
  to '#size-cells: const: 0' and '#address-cells: const: 1'
- replace all occurences of pattern "^eth\{hex_num}*"
  with "^(ethernet-)?port@[0-9]+$"
- add description in 'patternProperties:^...'
- add 'patternProperties:^...:interrupt-names:minItems: 1'
- add 'patternProperties:^...:reg:description'
- update 'patternProperties:^...:port-id:description'
- add 'patternProperties:^...:required: - reg'
- update '*:description:' to uppercase
- add 'allOf:then:required:marvell,system-controller'
- skip quotation marks from 'allOf:$ref'
- add 'else' schema to match 'allOf:if:then'
- restrict 'clocks' in 'allOf:if:then'
- restrict 'clock-names' in 'allOf:if:then'
- add #address-cells=<1>; #size-cells=<0>; in 'examples:'
- change every "ethX" to "ethernet-port@X" in 'examples:'
- add "reg" and comment in all ports in 'examples:'
- change /ethernet/eth0/phy-mode in examples://Armada-375
  to "rgmii-id"
- replace each cpm_ with cp0_ in 'examples:'
- replace each _syscon0 with _clk0 in 'examples:'
- remove each eth0X label in 'examples:'
- update armada-375.dtsi and armada-cp11x.dtsi to match
  marvell,pp2.yaml

v1->v2
- move 'properties' to the front of the file
- remove blank line after 'properties'
- move 'compatible' to the front of 'properties'
- move 'clocks', 'clock-names' and 'reg' definitions to 'properties'
- substitute all occurences of 'marvell,armada-7k-pp2' with
  'marvell,armada-7k-pp22'
- add properties:#size-cells and properties:#address-cells
- specify list in 'interrupt-names'
- remove blank lines after 'patternProperties'
- remove '^interrupt' and '^#.*-cells$' patterns
- remove blank line after 'allOf'
- remove first 'if-then-else' block from 'allOf'
- negate the condition in allOf:if schema
- delete 'interrupt-controller' from section 'examples'
- delete '#interrupt-cells' from section 'examples'
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the PP2 ethernet ports subnodes' names to match
schema enforced by the marvell,pp2.yaml contents.

Add new required properties ('reg') which contains information
about the port ID, keeping 'port-id' ones for backward
compatibility.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the PP2 ethernet ports subnodes' names to match
schema enforced by the marvell,pp2.yaml contents.

Add new required properties ('reg') which contains information
about the port ID, keeping 'port-id' ones for backward
compatibility.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert the marvell,pp2 bindings from text to proper schema.

Move 'marvell,system-controller' and 'dma-coherent' properties from
port up to the controller node, to match what is actually done in DT.

Rename all subnodes to match "^(ethernet-)?port@[0-2]$" and deprecate
port-id in favour of 'reg'.
Signed-off-by: Michał Grzelak <mig@semihalf.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use macro instead of function calls. These values are constant and will
not change.
Signed-off-by: Govindarajulu Varadarajan <govind.varadar@gmail.com>
Link: https://lore.kernel.org/r/20221018005804.188643-1-govind.varadar@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Removed those unused functions since we simplified the driver
by using the page pool to manage RX buffers.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20221017161236.1563975-1-shenwei.wang@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This driver was used on Arm and SH machines until 2009, when the
last platforms moved to the smsc911x driver for the same hardware.

Time to retire this version.

Link: https://lore.kernel.org/netdev/1232010482-3744-1-git-send-email-steve.glendinning@smsc.com/Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20221017121900.3520108-1-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2022-10-18

We've added 33 non-merge commits during the last 14 day(s) which contain
a total of 31 files changed, 874 insertions(+), 538 deletions(-).

The main changes are:

1) Add RCU grace period chaining to BPF to wait for the completion
   of access from both sleepable and non-sleepable BPF programs,
   from Hou Tao & Paul E. McKenney.

2) Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
   values. In the wild we have seen OS vendors doing buggy backports
   where helper call numbers mismatched. This is an attempt to make
   backports more foolproof, from Andrii Nakryiko.

3) Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions,
   from Roberto Sassu.

4) Fix libbpf's BTF dumper for structs with padding-only fields,
   from Eduard Zingerman.

5) Fix various libbpf bugs which have been found from fuzzing with
   malformed BPF object files, from Shung-Hsi Yu.

6) Clean up an unneeded check on existence of SSE2 in BPF x86-64 JIT,
   from Jie Meng.

7) Fix various ASAN bugs in both libbpf and selftests when running
   the BPF selftest suite on arm64, from Xu Kuohai.

8) Fix missing bpf_iter_vma_offset__destroy() call in BPF iter selftest
   and use in-skeleton link pointer to remove an explicit bpf_link__destroy(),
   from Jiri Olsa.

9) Fix BPF CI breakage by pointing to iptables-legacy instead of relying
   on symlinked iptables which got upgraded to iptables-nft,
   from Martin KaFai Lau.

10) Minor BPF selftest improvements all over the place, from various others.

* tag 'for-netdev' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (33 commits)
  bpf/docs: Update README for most recent vmtest.sh
  bpf: Use rcu_trace_implies_rcu_gp() for program array freeing
  bpf: Use rcu_trace_implies_rcu_gp() in local storage map
  bpf: Use rcu_trace_implies_rcu_gp() in bpf memory allocator
  rcu-tasks: Provide rcu_trace_implies_rcu_gp()
  selftests/bpf: Use sys_pidfd_open() helper when possible
  libbpf: Fix null-pointer dereference in find_prog_by_sec_insn()
  libbpf: Deal with section with no data gracefully
  libbpf: Use elf_getshdrnum() instead of e_shnum
  selftest/bpf: Fix error usage of ASSERT_OK in xdp_adjust_tail.c
  selftests/bpf: Fix error failure of case test_xdp_adjust_tail_grow
  selftest/bpf: Fix memory leak in kprobe_multi_test
  selftests/bpf: Fix memory leak caused by not destroying skeleton
  libbpf: Fix memory leak in parse_usdt_arg()
  libbpf: Fix use-after-free in btf_dump_name_dups
  selftests/bpf: S/iptables/iptables-legacy/ in the bpf_nf and xdp_synproxy test
  selftests/bpf: Alphabetize DENYLISTs
  selftests/bpf: Add tests for _opts variants of bpf_*_get_fd_by_id()
  libbpf: Introduce bpf_link_get_fd_by_id_opts()
  libbpf: Introduce bpf_btf_get_fd_by_id_opts()
  ...
====================

Link: https://lore.kernel.org/r/20221018210631.11211-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 40b09653 ("selftests/bpf: Adjust vmtest.sh to use local
kernel configuration") the vmtest.sh script no longer downloads a kernel
configuration but uses the local, in-repository one.
This change updates the README, which still mentions the old behavior.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221017232458.1272762-1-deso@posteo.net

Hou Tao says:

====================
Now bpf uses RCU grace period chaining to wait for the completion of
access from both sleepable and non-sleepable bpf program: calling
call_rcu_tasks_trace() firstly to wait for a RCU-tasks-trace grace
period, then in its callback calls call_rcu() or kfree_rcu() to wait for
a normal RCU grace period.

According to the implementation of RCU Tasks Trace, it inovkes
->postscan_func() to wait for one RCU-tasks-trace grace period and
rcu_tasks_trace_postscan() inovkes synchronize_rcu() to wait for one
normal RCU grace period in turn, so one RCU-tasks-trace grace period
will imply one normal RCU grace period. To codify the implication,
introduces rcu_trace_implies_rcu_gp() in patch #1. And using it in patch
Other two uses of call_rcu_tasks_trace() are unchanged: for
__bpf_prog_put_rcu() there is no gp chain and for
__bpf_tramp_image_put_rcu_tasks() it chains RCU tasks trace GP and RCU
tasks GP.

An alternative way to remove these unnecessary RCU grace period
chainings is using the RCU polling API to check whether or not a normal
RCU grace period has passed (e.g. get_state_synchronize_rcu()). But it
needs an unsigned long space for each free element or each call, and
it is not affordable for local storage element, so as for now always
rcu_trace_implies_rcu_gp().

Comments are always welcome.

Change Log:

v2:
 * codify the implication of RCU Tasks Trace grace period instead of
   assuming for it

v1: https://lore.kernel.org/bpf/20221011071128.3470622-1-houtao@huaweicloud.com

Hou Tao (3):
  bpf: Use rcu_trace_implies_rcu_gp() in bpf memory allocator
  bpf: Use rcu_trace_implies_rcu_gp() in local storage map
  bpf: Use rcu_trace_implies_rcu_gp() for program array freeing
====================
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

To support both sleepable and normal uprobe bpf program, the freeing of
trace program array chains a RCU-tasks-trace grace period and a normal
RCU grace period one after the other.

With the introduction of rcu_trace_implies_rcu_gp(),
__bpf_prog_array_free_sleepable_cb() can check whether or not a normal
RCU grace period has also passed after a RCU-tasks-trace grace period
has passed. If it is true, it is safe to invoke kfree() directly.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20221014113946.965131-5-houtao@huaweicloud.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Local storage map is accessible for both sleepable and non-sleepable bpf
program, and its memory is freed by using both call_rcu_tasks_trace() and
kfree_rcu() to wait for both RCU-tasks-trace grace period and RCU grace
period to pass.

With the introduction of rcu_trace_implies_rcu_gp(), both
bpf_selem_free_rcu() and bpf_local_storage_free_rcu() can check whether
or not a normal RCU grace period has also passed after a RCU-tasks-trace
grace period has passed. If it is true, it is safe to call kfree()
directly.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20221014113946.965131-4-houtao@huaweicloud.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The memory free logic in bpf memory allocator chains a RCU Tasks Trace
grace period and a normal RCU grace period one after the other, so it
can ensure that both sleepable and non-sleepable programs have finished.

With the introduction of rcu_trace_implies_rcu_gp(),
__free_rcu_tasks_trace() can check whether or not a normal RCU grace
period has also passed after a RCU Tasks Trace grace period has passed.
If it is true, freeing these elements directly, else freeing through
call_rcu().
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20221014113946.965131-3-houtao@huaweicloud.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

As an accident of implementation, an RCU Tasks Trace grace period also
acts as an RCU grace period.  However, this could change at any time.
This commit therefore creates an rcu_trace_implies_rcu_gp() that currently
returns true to codify this accident.  Code relying on this accident
must call this function to verify that this accident is still happening.
Reported-by: Hou Tao <houtao@huaweicloud.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/r/20221014113946.965131-2-houtao@huaweicloud.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The function ip6gre_tnl_addr_conflict() is defined in the ip6_gre.c file,
but not called elsewhere, so delete this unused function.

net/ipv6/ip6_gre.c:887:20: warning: unused function 'ip6gre_tnl_addr_conflict'.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2419Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221017093540.26806-1-jiapeng.chong@linux.alibaba.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

SYS_pidfd_open may be undefined for old glibc, so using sys_pidfd_open()
helper defined in task_local_storage_helpers.h instead to fix potential
build failure.

And according to commit 7615d9e1 ("arch: wire-up pidfd_open()"), the
syscall number of pidfd_open is always 434 except for alpha architure,
so update the definition of __NR_pidfd_open accordingly.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221011071249.3471760-1-houtao@huaweicloud.com

Shung-Hsi Yu says:

====================

Hi, this patch set fixes several fuzzer-reported issues of libbpf when
dealing with (malformed) BPF object file:

- patch #1 fix out-of-bound heap write reported by oss-fuzz (currently
  incorrectly marked as fixed)

- patch #2 and #3 fix null-pointer dereference found by locally-run
  fuzzer.

v2:
- Rebase to bpf-next
- Move elf_getshdrnum() closer to where it's result is used in patch #1, as
  suggested by Andrii
  - Touch up the comment in bpf_object__elf_collect(), replacing mention of
    e_shnum with elf_getshdrnum()
- Minor wording change in commit message of patch #1 to for better readability
- Remove extra note that comes after commit message in patch #1

v1: https://lore.kernel.org/bpf/20221007174816.17536-1-shung-hsi.yu@suse.com/
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>