- 24 Aug, 2004 40 commits
-
-
Paolo \'Blaisorblade\' Giarrusso authored
Turns off syscall emulation patch for ptrace (SYSEMU) on. SYSEMU is a performance-patch introduced by Laurent Vivier. It changes behaviour of ptrace() and helps reducing host context switch rate. To make it working, you need a kernel patch for your host, too. See http://perso.wanadoo.fr/laurent.vivier/UML/ for further information. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Paolo \'Blaisorblade\' Giarrusso authored
Folds hostaudio_user.c into hostaudio_kern.c. A lot of code less. Also note that I no more update ppos(as I used to do in the 2.4 patch): I checked that OSS never changes ppos, so hostaudio did the right thing. Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
[PATCH] uml: Fixes raw() and uses it in check_one_sigio; also fixes a silly panic (EINTR returned by call). Fixes raw() and uses it in check_one_sigio; also fixes a silly panic (EINTR returned by call). Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
Reduces code in *_user files, by moving it in _kern files if already possible. Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
Avoids compile failure when host misses tkill(), by simply using kill() in that case. Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
Fixes some little warnings about "Defined but not used ..." by #ifdef'ing things Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
You probably saw that if you change one config option, even if linux/autoconf.h (which is included by everything) changes, the kernel is smart enough not to recompile everything. But with UML this no more holds. Why? Because, as you see in this patch, fixdep avoids making anything depend onto linux/autoconf.h *explicitly*, but nobody taught him to do the same for arch/um/include/uml-config.h. So apply this patch. Do not say "I don't want to change the generic Kbuild for one arch": this cannot hurt. It's a bugfix for us, a no-op for others. Note: with this patch, fixdep will still add a dependency from a file containing UML_CONFIG_BYE onto CONFIG_BYE. Since someone could think that fixdep should grep for [^A-Z_]CONFIG_ rather than simply for CONFIG_, I've added a comment that ask *not to fix* this "bug". Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
Makes "make help ARCH=um" work. Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
The second adds the LEGACY_PTY config option. Without it, with late 2.6 kernels /dev/ptyxx won't work. In fact, with those kernels, root_fs_toms does not work, because it's "unable to allocate TTY pair". And removes the dead option "UNIX98_PTY_COUNT" (just commented out for now). Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
In detail, on 2.4 we used force_delete() to make sure inode were not cached, and we then close the host file when the inode is cleared; when porting to 2.6 the "force_delete" thing was dropped, and this patch adds a fix for this (by setting drop_inode = generic_delete_inode). Search for drop_inode in the 2.6 Documentation/filesystems/vfs.txt for info about this. Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
Avoid that gcc breaks UML with "unit at a time" compilation mode. Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
Just for now and just for UML; it will go away. Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
In the -mm tree (in this moment) and not in 2.6.7 there is another console_device in include/linux/console.h; so I renamed the UML one (it's static). Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Andrew Morton authored
Update UML for CPU scheduler changes Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Jeff Dike authored
The patch below brings UML up to date with some changes in the rest of the kernel: an updated defconfig checksum.h includes in6.h to get a definition of in6_addr added a missing cpu_{set,clear} change removed include/asm-um/module.h since it's really a link Signed-off-by: -
Jeff Dike authored
The code is still there but it's not built. Below is a patch which removes it totally. Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
The main part of UML; it is the last distributed patch for 2.6.7 Removes skas support from the main UML patch; apply or get conflicts. Signed-off-by:
-
Anton Blanchard authored
From: <arjanv@redhat.com> Implement the new address space layout for 32-bit apps running on ppc64. Signed-off-by:
-
Arjan van de Ven authored
Below is a patch from Pete Zaitcev (zaitcev@redhat.com) to also use the flex mmap infrastructure for s390(x). The IBM Domino guys *really* seem to want this. Signed-off-by:
-
Arjan van de Ven authored
Create /proc/sys/vm/legacy_va_layout. If this is non-zero, the kernel will use the old mmap layout for all tasks. it presently defaults to zero (the new layout). From: William Lee Irwin III <wli@holomorphy.com> hugetlb CONFIG_SYSCTL=n fix Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Arjan van de Ven authored
Utz Lehmann <u.lehmann@de.tecosim.com> found a problem with the flexmmap patches on x86-64, what he is seeing is that the 32 bit personality isn't set at the first point of setting the allocator strategy. The solution is simple, in binfmt_elf the personality is set so put the pick-layout function there. Please consider, Signed-off-by:
Arjan van de Ven <arjanv@redhat.com> Signed-off-by:
-
Ingo Molnar authored
Rework the i386 mm layout to allow applications to allocate more virtual memory, and larger contiguous chunks. - the patch is compatible with existing architectures that either make use of HAVE_ARCH_UNMAPPED_AREA or use the default mmap() allocator - there is no change in behavior. - 64-bit architectures can use the same mechanism to clean up 32-bit compatibility layouts: by defining HAVE_ARCH_PICK_MMAP_LAYOUT and providing a arch_pick_mmap_layout() function - which can then decide between various mmap() layout functions. - I also introduced a new personality bit (ADDR_COMPAT_LAYOUT) to signal older binaries that dont have PT_GNU_STACK. x86 uses this to revert back to the stock layout. I also changed x86 to not clear the personality bits upon exec(), like x86-64 already does. - once every architecture that uses HAVE_ARCH_UNMAPPED_AREA has defined its arch_pick_mmap_layout() function, we can get rid of HAVE_ARCH_UNMAPPED_AREA altogether, as a final cleanup. the new layout generation function (__get_unmapped_area()) got significant testing in FC1/2, so i'm pretty confident it's robust. Compiles & boots fine on an 'old' and on a 'new' x86 distro as well. The two known breakages were: http://www.redhatconfig.com/msg/67248.html [ 'cyzload' third-party utility broke. ] http://www.zipworld.com/au/~akpm/dde.tar.gz [ your editor broke :-) ] both were caused by application bugs that did: int ret = malloc(); if (ret <= 0) failure; such bugs are easy to spot if they happen, and if it happens it's possible to work it around immediately without having to change the binary, via the setarch patch. No other application has been found to be affected, and this particular change got pretty wide coverage already over RHEL3 and exec-shield, it's in use for more than a year. The setarch utility can be used to trigger the compatibility layout on x86, the following version has been patched to take the `-L' option: http://people.redhat.com/mingo/flexible-mmap/setarch-1.4-2.tar.gz "setarch -L i386 <command>" will run the command with the old layout. From: Hugh Dickins <hugh@veritas.com> The problem is in the flexible mmap patch: arch_get_unmapped_area_topdown is liable to give your mmap vm_start above TASK_SIZE with vm_end wrapped; which is confusing, and ends up as that BUG_ON(mm->map_count). The patch below stops that behaviour, but it's not the full solution: wilson_mmap_test -s 1000 then simply cannot allocate memory for the large mmap, whereas it works fine non-top-down. I think it's wrong to interpret a large or rlim_infinite stack rlimit as an inviolable request to reserve that much for the stack: it makes much less VM available than bottom up, not what was intended. Perhaps top down should go bottom up (instead of belly up) when it fails - but I'd probably better leave that to Ingo. Or perhaps the default should place stack below text (as WLI suggested and ELF intended, with its text defaulting to 0x08048000, small progs sharing page table between stack and text and data); with a further personality for those needing bigger stack. From: Ingo Molnar <mingo@elte.hu> - fall back to the bottom-up layout if the stack can grow unlimited (if the stack ulimit has been set to RLIM_INFINITY) - try the bottom-up allocator if the top-down allocator fails - this can utilize the hole between the true bottom of the stack and its ulimit, as a last-resort effort. Signed-off-by: -
Ingo Molnar authored
while looking at HT scheduler bugreports and boot failures i discovered a bad assumption in most of the HT scheduling code: that resched_task() can be called without holding the task's runqueue. This is most definitely not valid - doing it without locking can lead to the task on that CPU exiting, and this CPU corrupting the (ex-) task_info struct. It can also lead to HT-wakeup races with task switching on that other CPU. (this_CPU marking the wrong task on that_CPU as need_resched - resulting in e.g. idle wakeups not working.) The attached patch against fixes it all up. Changes: - resched_task() needs to touch the task so the runqueue lock of that CPU must be held: resched_task() now enforces this rule. - wake_priority_sleeper() was called without holding the runqueue lock. - wake_sleeping_dependent() needs to hold the runqueue locks of all siblings (2 typically). Effects of this ripples back to schedule() as well - in the non-SMT case it gets compiled out so it's fine. - dependent_sleeper() needs the runqueue locks too - and it's slightly harder because it wants to know the 'next task' info which might change during the lock-drop/reacquire. Ripple effect on schedule() => compiled out on non-SMT so fine. - resched_task() was disabling preemption for no good reason - all paths that called this function had either a spinlock held or irqs disabled. Compiled & booted on x86 SMP and UP, with and without SMT. Booted the SMT kernel on a real SMP+HT box as well. (Unpatched kernel wouldn't even boot with the resched_task() assert in place.) Signed-off-by:
-
Ingo Molnar authored
disable preemption in the self-reap codepath, as such tasks may not be on the tasklist anymore and CPU-hotplug relies on the tasklist to migrate tasks. Signed-off-by:
-
Ingo Molnar authored
release_task() calls proc_pid_flush() call dput(), which can sleep. But that's a late-in-exit no-preempt path with CONFIG_PREEMPT. Signed-off-by:
-
Ingo Molnar authored
Rusty noticed that we update the parent ->avg_sleep without holding the runqueue lock. Also the code needed cleanups. Signed-off-by:
-
Ingo Molnar authored
* Nick Piggin <nickpiggin@yahoo.com.au> wrote: > Increasing priority (negative nice) doesn't have much impact. -20 CPU > hog only gets about double the CPU of a 0 priority CPU hog and only > about 120% the CPU time of a nice -10 hog. this is a property of the base scheduler as well. We can do a nonlinear timeslice distribution trivially - the attached patch implements the following timeslice distribution ontop of 2.6.8-rc3-mm1: [ -20 ... 0 ... 19 ] => [800ms ... 100ms ... 5ms] the nice-20/nice+19 ratio is now 1:160 - sufficient for all aspects. Signed-off-by:
-
Ingo Molnar authored
- whitespace and style cleanups Signed-off-by:
-
Andrew Morton authored
SMP fix -- for_each_domain() is not defined if not CONFIG_SMP, so show_schedstat needed a couple of extra ifdefs. Signed-off-by:Rick Lindsley <ricklind@us.ibm.com> Signed-off-by:
-
William Lee Irwin III authored
Fix up sparc32 properly. Signed-off-by:
-
William Lee Irwin III authored
It appears that init_idle() and fork_by_hand() could be combined into a single method that calls init_idle() on behalf of the caller. Signed-off-by:
-
Nathan Lynch authored
Otherwise it shows up under "iSeries device drivers", which doesn't seem right. Signed-off-by:
Nathan Lynch <nathanl@austin.ibm.com> Signed-off-by:
-
Rick Lindsley authored
It adds lots of CPU scheduler stats in /proc/pid/stat. They are described in the new Documentation//sched-stats.txt We were carrying this patch offline for some time, but as there's still considerable ongoing work in this area, and as the new stats are a configuration option, I think it's best that this capability be in the base kernel. Nick removed a fair amount of statistics that he wasn't using. The full patch gathers more information. In particular, his patch doesn't include the code to measure the latency between the time a process is made runnable and the time it hits a processor which will be key to measuring interactivity changes. He passed his changes back to me and I got finished merging his changes with the current statistics patches just before OLS. I believe this is largely a superset of the patch you grabbed and should port relatively easily too. Versions also exist for 2.6.8-rc2 2.6.8-rc2-mm1 2.6.8-rc2-mm2 at http://eaglet.rain.com/rick/linux/schedstat/patches/ and within 24 hours at http://oss.software.ibm.com/linux/patches/?patch_id=730&show=all The version below is for 2.6.8-rc2-mm2 without the staircase code and has been compiled cleanly but not yet run. From: Ingo Molnar <mingo@elte.hu> this code needs a couple of cleanups before it can go into mainline: fs/proc/array.c, fs/proc/base.c, fs/proc/proc_misc.c: - moved the new /proc/<PID>/stat fields to /proc/<PID>/schedstat, because the new fields break older procps. It's cleaner this way anyway. This moving of fields necessiated a bump to version 10. Documentation/sched-stats.txt: - updated sched-stats.txt for version 10 - wake_up_forked_thread() => wake_up_new_task() - updated the per-process field description Kconfig: - removed the default y and made the option dependent on DEBUG_KERNEL. This is really for scheduler analysis, normal users dont need the overhead. include/linux/sched.h: - moved the definitions into kernel/sched.c - this fixes UP compilation and is cleaner. - also moved the sched-domain definitions to sched.c - now that the sched-domains internals are not exposed to architectures this is doable. It's also necessary due to the previous change. kernel/fork.c: - moved the ->sched_info init to sched_fork() where it belongs. kernel/sched.c: - wake_up_forked_thread() -> wake_up_new_task(), wuft_cnt -> wunt_cnt, wuft_moved -> wunt_moved. - wunt_cnt and wunt_moved were defined by never updated - added the missing code to wake_up_new_task(). - whitespace/style police - removed whitespace changes done to code not related to schedstats - i'll send a separate patch for these (and more). Signed-off-by: -
Con Kolivas authored
The smt-nice handling is a little too aggressive by not estimating the per cpu gain as high enough for pentium4 hyperthread. This patch changes the per sibling cpu gain from 15% to 25%. The true per cpu gain is entirely dependant on the workload but overall the 2 species of Pentium4 that support hyperthreading have about 20-30% gain. P.S: Anton - For the power processors that are now using this SMT nice infrastructure it would be worth setting this value separately at 40%. Signed-off-by:
Con Kolivas <kernel@kolivas.org> Signed-off-by:
-
Matthew Dobson authored
In light of some proposed changes in the sched_domains code, I coded up this little ditty that simply creates and populates a cpu_sibling_map for PPC64 machines. The patch just checks the CPU flags to determine if the CPU supports SMT (aka Hyper-Threading aka Multi-Threading aka ...) and fills in a mask of the siblings for each CPU in the system. This should allow us to build sched_domains for PPC64 with generic code in kernel/sched.c for the SMT systems. SMT is becoming more popular and is turning up in more and more architectures. I don't think it will be too long until this feature is supported by most arches... Signed-off-by:
Matthew Dobson <colpatch@us.ibm.com> Signed-off-by:
-
Dimitri Sivanich authored
Here's a version of the isolated scheduler domain code that I mentioned in an RFC on 7/22. This patch applies on top of 2.6.8-rc2-mm1 (to include all of the new arch_init_sched_domain code). This patch also contains the 2 line fix to remove the check of first_cpu(sd->groups->cpumask)) that Jesse sent in earlier. Note that this has not been tested with CONFIG_SCHED_SMT. I hope that my handling of those instances is OK. Signed-off-by:
Dimitri Sivanich <sivanich@sgi.com> Signed-off-by:
-
Jesse Barnes authored
This patch limits the cpu span of each node's scheduler domain to prevent balancing across too many cpus. The cpus included in a node's domain are determined by the SD_NODES_PER_DOMAIN define and the arch specific sched_domain_node_span routine if ARCH_HAS_SCHED_DOMAIN is defined. If ARCH_HAS_SCHED_DOMAIN is not defined, behavior is unchanged--all possible cpus will be included in each node's scheduling domain. Currently, only ia64 provides an arch specific sched_domain_node_span routine. From: Jesse Barnes <jbarnes@engr.sgi.com> This patch adds some more NUMA specific logic to the creation of scheduler domains. Domains spanning all CPUs in a large system are too large to schedule across efficiently, leading to livelocks and inordinate amounts of time being spent in scheduler routines. With this patch applied, the node scheduling domains for NUMA platforms will only contain a specified number of nearby CPUs, based on the value of SD_NODES_PER_DOMAIN. It also allows arches to override SD_NODE_INIT, which sets the domain scheduling parameters for each node's domain. This is necessary especially for large systems. Possible future directions: o multilevel node hierarchy (e.g. node domains could contain 4 nodes worth of CPUs, supernode domains could contain 32 nodes worth, etc. each with their own SD_NODE_INIT values) o more tweaking of SD_NODE_INIT values for good load balancing vs. overhead tradeoffs From: mita akinobu <amgta@yacht.ocn.ne.jp> Compile fix Signed-off-by:Jesse Barnes <jbarnes@sgi.com> Signed-off-by:
-
Nick Piggin authored
Teach the generic domains builder about SMT, and consolidate all architecture specific domain code into that. Also, the SD_*_INIT macros can now be redefined by arch code without duplicating the entire setup code. This can be done by defining ARCH_HASH_SCHED_TUNE. The generic builder has been simplified with the addition of a helper macro which will probably prove to be useful to arch specific code as well and should be exported if that is the case. Signed-off-by:
Nick Piggin <nickpiggin@yahoo.com.au> From: Matthew Dobson <colpatch@us.ibm.com> The attached patch is against 2.6.8-rc2-mm2, and removes Nick's conditional definition & population of cpu_sibling_map[] in favor of my unconditional ones. This does not affect how cpu_sibling_map is used, just gives it broader scope. From: Nick Piggin <nickpiggin@yahoo.com.au> Small fix to sched-consolidate-domains.patch picked up by From: Suresh <suresh.b.siddha@intel.com> another sched consolidate domains fix From: Nick Piggin <nickpiggin@yahoo.com.au> Don't use cpu_sibling_map if !CONFIG_SCHED_SMT This one spotted by Dimitri Sivanich <sivanich@sgi.com> Signed-off-by:
-
Ingo Molnar authored
- remove the hotplug lock from around much of fork(), and re-copy the cpus_allowed mask to solve the hotplug race cleanly. Signed-off-by:
Srivatsa Vaddagiri <vatsa@in.ibm.com> Signed-off-by:
-
Nick Piggin authored
This removes balance on clone capability altogether. I told Andi we wouldn't remove it yet, but provided it is in a single small patch, he mightn't get too upset. Signed-off-by:
-
