- 29 Oct, 2014 7 commits
-
-
hayeswang authored
Replace tx_underun with tx_underrun for checkpatch.pl. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
While testing upcoming Yaogong patch (converting out of order queue into an RB tree), I hit the max reordering level of linux TCP stack. Reordering level was limited to 127 for no good reason, and some network setups [1] can easily reach this limit and get limited throughput. Allow a new max limit of 300, and add a sysctl to allow admins to even allow bigger (or lower) values if needed. [1] Aggregation of links, per packet load balancing, fabrics not doing deep packet inspections, alternative TCP congestion modules... Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Yaogong Wang <wygivan@google.com> Signed-off-by:
-
Roberto Medina authored
Several warnings and errors of coding style rules corrected. Compile tested. Signed-off-by:
Roberto Medina <robertoxmed@gmail.com> Signed-off-by:
-
Toshiaki Makita authored
This patch generalizes commit d6a4a104 ("tcp: GSO should be TSQ friendly") to protocols using skb_set_owner_w() TCP uses its own destructor (tcp_wfree) and needs a more complex scheme as explained in commit 6ff50cd5 ("tcp: gso: do not generate out of order packets") This allows UDP sockets using UFO to get proper backpressure, thus avoiding qdisc drops and excessive cpu usage. Here are performance test results (macvlan on vlan): - Before # netperf -t UDP_STREAM ... Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 65507 60.00 144096 1224195 1258.56 212992 60.00 51 0.45 Average: CPU %user %nice %system %iowait %steal %idle Average: all 0.23 0.00 25.26 0.08 0.00 74.43 - After # netperf -t UDP_STREAM ... Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 65507 60.00 109593 0 957.20 212992 60.00 109593 957.20 Average: CPU %user %nice %system %iowait %steal %idle Average: all 0.18 0.00 8.38 0.02 0.00 91.43 [edumazet] Rewrote patch and changelog. Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
-
Matei Pavaluca authored
The hardware can automatically generate pause frames when the number of free buffers drops under a certain threshold, but in order to do this, the address of the last free buffer needs to be written to a specific register for each RX queue. This has to be done in 'gfar_clean_rx_ring' which is called for each RX queue. In order not to impact performance, by adding a register write for each incoming packet, this operation is done only when the PAUSE frame transmission is enabled. Whenever the link is readjusted, this capability is turned on or off. Signed-off-by:
Matei Pavaluca <matei.pavaluca@freescale.com> Signed-off-by:
-
Pavaluca Matei-B46610 authored
Local flow control options needed in order to resolve the negotiation are incorrectly calculated. Previously 'mii_advertise_flowctrl' was called to determine the local advertising options, but these were determined based on FLOW_CTRL_RX/TX flags which are never set through ethtool. The patch simply translates from ethtool flow options to mii flow options. Signed-off-by:
-
Pavaluca Matei-B46610 authored
The phy device supports 802.3x flow control, but the specific flags are not set in the phy initialisation code. Flow control flags need to be added to the supported capabilities of the phydev by the driver. This is needed in order for ethtool to work ('ethtool -A' code checks for these flags) Signed-off-by:
-
- 28 Oct, 2014 19 commits
-
-
David S. Miller authored
ERROR: "lockdep_ovsl_is_held" [net/openvswitch/vport-gre.ko] undefined! Reported-by:
Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by:
-
David S. Miller authored
Amir Vadai says: ==================== Mellanox ethernet driver update Oct-27-2014 This patchset introduces some small bug fixes, support in get/set of vlan offload and get/set/capabilities of the link. First 7 patches by Saeed, add support in setting/getting link speed and getting cable capabilities. Next 2 patches also by Saeed, enable the user to turn rx/tx vlan offloading on and off. Jenni fixed a bug in error flow during device initalization. Ido and Jack fixed some code duplication and errors discovered by static checker. last patch by me is a fix to make ethtool report the actual rings used by indirection QP. Patches were applied and tested against commit 61ed53de ("Merge tag 'ntb-3.18' of git://github.com/jonmason/ntb") ==================== Signed-off-by:
-
Amir Vadai authored
Hardware requires the number of rings in indirection table to be a power of 2. When setting number of channels to a non power of 2 number, indirection table is using only the closest power of 2 rings. Report this number in 'ethtool -x' and not the total number of rx rings. Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Eugenia Emantayev authored
Upon failures, destroy_netdev is called, and spinlocks/works must be initialized before calling it. Otherwise kernel panic may occur. Signed-off-by:
-
Ido Shamay authored
This is instead of calling the actual implementation of napi_synchronize, for better encapsulation. Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
clang flagged the following. All are actually cosmetic cleanups, not really bugs: drivers/net/ethernet/mellanox/mlx4/en_main.c:233:3: warning: Value stored to 'err' is never read err = -ENOMEM; ^ ~~~~~~~ drivers/net/ethernet/mellanox/mlx4/en_main.c:293:3: warning: Value stored to 'err' is never read err = -ENOMEM; drivers/net/ethernet/mellanox/mlx4/en_netdev.c:648:16: warning: Assigned value is garbage or undefined entry->reg_id = reg_id; ^ ~~~~~~ drivers/net/ethernet/mellanox/mlx4/en_netdev.c:659:2: warning: Function call argument is an uninitialized value mlx4_en_uc_steer_release(priv, priv->dev->dev_addr, *qpn, reg_id); (NOTE: reg_id is only used in the device-managed flow steering path, in which is it always initialized. This is not a bug. Cleanup here is therefore cosmetic only). drivers/net/ethernet/mellanox/mlx4/en_rx.c:122:3: warning: Value stored to 'frag_info' is never read frag_info = &priv->frag_info[i]; ^ ~~~~~~~~~~~~~~~~~~~ Signed-off-by:Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Saeed Mahameed authored
Move mlx4_en_reset_config to en_netdev.c as it now serves more general purpose. Add support for turning OFF/ON the rx/tx vlan offlad. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
Rename mlx4_en_timestamp_config to mlx4_en_reset_config and extend it to support choosing RX vlan offload configuration. Signed-off-by:
-
Saeed Mahameed authored
Added Support to set speed or advertised link modes via ethtool: ethtool -s <ifname> [speed <speed>] [advertise <link modes>] Signed-off-by:
-
Saeed Mahameed authored
- If dev cap MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL is ON, query PTYS register to fill ethtool settings. else use default values. - Use autoneg port cap and dev backplane autoneg cap to reprort autoneg interface capbilities. - Fix typo in mlx4_en_port_state struct field (transciver to transceiver). Signed-off-by:
-
Saeed Mahameed authored
Added 100M, 20G and 56G ethtool speed reporting support. Update mlx4_en_test_speed self test with the new speeds. Defined new link speeds in include/uapi/linux/ethtool.h: +#define SPEED_20000 20000 +#define SPEED_40000 40000 +#define SPEED_56000 56000 Signed-off-by:
-
Saeed Mahameed authored
Signed-off-by:
-
Saeed Mahameed authored
Adding ACCESS REG mlx4 command and use it to implement Query method for PTYS (Port Type and Speed Register). Query and store eth_prot_ctrl dev cap. Signed-off-by:
-
Saeed Mahameed authored
Added support for get_module_info/get_module_eeprom ethtool support for cable info reading. Added new cable types enum in include/uapi/linux/ethtool.h for ethtool use. +#define ETH_MODULE_SFF_8636 0x3 +#define ETH_MODULE_SFF_8636_LEN 256 +#define ETH_MODULE_SFF_8436 0x4 +#define ETH_MODULE_SFF_8436_LEN 256 Signed-off-by:
-
Saeed Mahameed authored
Added new MAD_IFC command to read cable module info with attribute id (0xFF60). Update include/linux/mlx4/device.h with function declaration (mlx4_get_module_info) and the needed defines/enums for future use. Signed-off-by:
-
Simon Horman authored
The original motivation for this change was to allow the helper to be used in files other than actions.c as part of work on an odp select group action. It was as pointed out by Thomas Graf that this helper would be best off living in netlink.h. Furthermore, I think that the generic nature of this helper means it is best off in netlink.h regardless of if it is used more than one .c file or not. Thus, I would like it considered independent of the work on an odp select group action. Cc: Thomas Graf <tgraf@suug.ch> Cc: Pravin Shelar <pshelar@nicira.com> Cc: Andy Zhou <azhou@nicira.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
Thomas Graf <tgraf@noironetworks.com> Signed-off-by:
-
Sebastian Hesselbarth authored
Do not add phy include to the board file but platform_data include instead. Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by:
-
Viet Nga Dao authored
Additional code to m88e1145_config_init function to allow the driver to support SGMII mode. Signed-off-by:
Viet Nga Dao <vndao@altera.com> Signed-off-by:
-
Thomas Graf authored
The internal and netdev vport remain part of openvswitch.ko. Encap vports including vxlan, gre, and geneve can be built as separate modules and are loaded on demand. Modules can be unloaded after use. Datapath ports keep a reference to the vport module during their lifetime. Allows to remove the error prone maintenance of the global list vport_ops_list. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
- 27 Oct, 2014 14 commits
-
-
David S. Miller authored
Varka Bhadram says: ==================== cleanup on resource check This series removes the duplication of sanity check for platform_get_resource() return resource. It will be checked with devm_ioremap_resource() changes since v2: - Merge #1 and #2 patches into single patch - remove the comment changes since v1: - remove NULL dereference on resource_size() ==================== Signed-off-by: -
Varka Bhadram authored
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by:
Varka Bhadram <varkab@cdac.in> Signed-off-by:
-
Varka Bhadram authored
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by:
-
Varka Bhadram authored
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by:
-
Varka Bhadram authored
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by:
-
Varka Bhadram authored
devm_ioremap_resource checks platform_get_resource() return value. We can remove the duplicate check here. Signed-off-by:
-
Kyeyoon Park authored
This feature is defined in IEEE Std 802.11-2012, 10.23.13. It allows the AP devices to keep track of the hardware-address-to-IP-address mapping of the mobile devices within the WLAN network. The AP will learn this mapping via observing DHCP, ARP, and NS/NA frames. When a request for such information is made (i.e. ARP request, Neighbor Solicitation), the AP will respond on behalf of the associated mobile device. In the process of doing so, the AP will drop the multicast request frame that was intended to go out to the wireless medium. It was recommended at the LKS workshop to do this implementation in the bridge layer. vxlan.c is already doing something very similar. The DHCP snooping code will be added to the userspace application (hostapd) per the recommendation. This RFC commit is only for IPv4. A similar approach in the bridge layer will be taken for IPv6 as well. Signed-off-by:
Kyeyoon Park <kyeyoonp@codeaurora.org> Signed-off-by:
-
Fabian Frederick authored
Let compiler decide what to do with static void __ipxitf_put() Suggested-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Fabian Frederick authored
use %08X instead of %08lX and remove casting. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Fabian Frederick authored
include ipx.h from sysctl_net_ipx.c Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
unsigned char *sha (source) was already in original git version but was never used. Signed-off-by:
-
David S. Miller authored
Frank Blaschka says: ==================== s390: network patches for net-next looks like there was a problem with my previous posting. Hope this time it will work. Sorry for any inconvenience. The patches are mostly cleanups and small enhancements for net-next ==================== Signed-off-by:
-
