Pull ARC fixes from Vineet Gupta:

 - Assorted fixes

* tag 'arc-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: remove redundant READ_ONCE() in cmpxchg loop
  ARC: atomic: cleanup atomic-llsc definitions
  arc: drop definitions of pgd_index() and pgd_offset{, _k}() entirely
  ARC: dts: align SPI NOR node name with dtschema
  ARC: Remove a redundant memset()
  ARC: fix typos in comments
  ARC: entry: fix syscall_trace_exit argument

Pull SCSI fix from James Bottomley:
 "One fix for an information leak caused by copying a buffer to
  userspace without checking for error first in the sr driver"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sr: Do not leak information in ioctl

Pull xen fixes from Juergen Gross:
 "A simple cleanup patch and a refcount fix for Xen on Arm"

* tag 'for-linus-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  arm/xen: Fix some refcount leaks
  xen: Convert kmap() to kmap_local_page()

Pull more drm fixes from Dave Airlie:
 "Maarten was away, so Maxine stepped up and sent me the drm-fixes
  merge, so no point leaving it for another week.

  The big change is an OF revert around bridge/panels, it may have some
  driver fallout, but hopefully this revert gets them shook out in the
  next week easier.

  Otherwise it's a bunch of locking/refcounts across drivers, a radeon
  dma_resv logic fix and some raspberry pi panel fixes.

  panel:
   - revert of patch that broke panel/bridge issues

  dma-buf:
   - remove unused header file.

  amdgpu:
   - partial revert of locking change

  radeon:
   - fix dma_resv logic inversion

  panel:
   - pi touchscreen panel init fixes

  vc4:
   - build fix
   - runtime pm refcount fix

  vmwgfx:
   - refcounting fix"

* tag 'drm-fixes-2022-04-23' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: partial revert "remove ctx->lock" v2
  Revert "drm: of: Lookup if child node has panel or bridge"
  Revert "drm: of: Properly try all possible cases for bridge/panel detection"
  drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
  drm/vmwgfx: Fix gem refcounting and memory evictions
  drm/vc4: Fix build error when CONFIG_DRM_VC4=y && CONFIG_RASPBERRYPI_FIRMWARE=m
  drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare
  drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised
  dma-buf-map: remove renamed header file
  drm/radeon: fix logic inversion in radeon_sync_resv

Pull input fixes from Dmitry Torokhov:

 - a new set of keycodes to be used by marine navigation systems

 - minor fixes to omap4-keypad and cypress-sf drivers

* tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: add Marine Navigation Keycodes
  Input: omap4-keypad - fix pm_runtime_get_sync() error checking
  Input: cypress-sf - register a callback to disable the regulators

Pull block fixes from Jens Axboe:
 "Just two small regression fixes for bcache"

* tag 'block-5.18-2022-04-22' of git://git.kernel.dk/linux-block:
  bcache: fix wrong bdev parameter when calling bio_alloc_clone() in do_bio_hook()
  bcache: put bch_bio_map() back to correct location in journal_write_unlocked()

Pull io_uring fixes from Jens Axboe:
 "Just two small fixes - one fixing a potential leak for the iovec for
  larger requests added in this cycle, and one fixing a theoretical leak
  with CQE_SKIP and IOPOLL"

* tag 'io_uring-5.18-2022-04-22' of git://git.kernel.dk/linux-block:
  io_uring: fix leaks on IOPOLL and CQE_SKIP
  io_uring: free iovec if file assignment fails

Merge tag 'perf-tools-fixes-for-v5.18-2022-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix header include for LLVM >= 14 when building with libclang.

 - Allow access to 'data_src' for auxtrace in 'perf script' with ARM SPE
   perf.data files, fixing processing data with such attributes.

 - Fix error message for test case 71 ("Convert perf time to TSC") on
   s390, where it is not supported.

* tag 'perf-tools-fixes-for-v5.18-2022-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf test: Fix error message for test case 71 on s390, where it is not supported
  perf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event
  perf script: Always allow field 'data_src' for auxtrace
  perf clang: Fix header include for LLVM >= 14

Add a struct page forward declaration to cacheflush_32.h.
Fixes this build warning:

    CC      drivers/crypto/xilinx/zynqmp-sha.o
  In file included from arch/sparc/include/asm/cacheflush.h:11,
                   from include/linux/cacheflush.h:5,
                   from drivers/crypto/xilinx/zynqmp-sha.c:6:
  arch/sparc/include/asm/cacheflush_32.h:38:37: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration
     38 | void sparc_flush_page_to_ram(struct page *page);

Exposed by commit 0e03b8fd ("crypto: xilinx - Turn SHA into a
tristate and allow COMPILE_TEST") but not Fixes: that commit because the
underlying problem is older.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: sparclinux@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Two fixes for the raspberrypi panel initialisation, one fix for a logic
inversion in radeon, a build and pm refcounting fix for vc4, two reverts
for drm_of_get_bridge that caused a number of regression and a locking
regression for amdgpu.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422084403.2xrhf3jusdej5yo4@houat

Pull ext4 fixes from Ted Ts'o:
 "Fix some syzbot-detected bugs, as well as other bugs found by I/O
  injection testing.

  Change ext4's fallocate to consistently drop set[ug]id bits when an
  fallocate operation might possibly change the user-visible contents of
  a file.

  Also, improve handling of potentially invalid values in the the
  s_overhead_cluster superblock field to avoid ext4 returning a negative
  number of free blocks"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: fix a potential race while discarding reserved buffers after an abort
  ext4: update the cached overhead value in the superblock
  ext4: force overhead calculation if the s_overhead_cluster makes no sense
  ext4: fix overhead calculation to account for the reserved gdt blocks
  ext4, doc: fix incorrect h_reserved size
  ext4: limit length to bitmap_maxbytes - blocksize in punch_hole
  ext4: fix use-after-free in ext4_search_dir
  ext4: fix bug_on in start_this_handle during umount filesystem
  ext4: fix symlink file size not match to file content
  ext4: fix fallocate to use file_modified to update permissions consistently

Pull ATA fix from Damien Le Moal:
 "A single fix to avoid a NULL pointer dereference in the pata_marvell
  driver with adapters not supporting DMA, from Zheyu"

* tag 'ata-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_marvell: Check the 'bmdma_addr' beforing reading

Pull kvm fixes from Paolo Bonzini:
 "The main and larger change here is a workaround for AMD's lack of
  cache coherency for encrypted-memory guests.

  I have another patch pending, but it's waiting for review from the
  architecture maintainers.

  RISC-V:

   - Remove 's' & 'u' as valid ISA extension

   - Do not allow disabling the base extensions 'i'/'m'/'a'/'c'

  x86:

   - Fix NMI watchdog in guests on AMD

   - Fix for SEV cache incoherency issues

   - Don't re-acquire SRCU lock in complete_emulated_io()

   - Avoid NULL pointer deref if VM creation fails

   - Fix race conditions between APICv disabling and vCPU creation

   - Bugfixes for disabling of APICv

   - Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume

  selftests:

   - Do not use bitfields larger than 32-bits, they differ between GCC
     and clang"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: selftests: introduce and use more page size-related constants
  kvm: selftests: do not use bitfields larger than 32-bits for PTEs
  KVM: SEV: add cache flush to solve SEV cache incoherency issues
  KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs
  KVM: SVM: Simplify and harden helper to flush SEV guest page(s)
  KVM: selftests: Silence compiler warning in the kvm_page_table_test
  KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog
  x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
  KVM: SPDX style and spelling fixes
  KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled
  KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race
  KVM: nVMX: Defer APICv updates while L2 is active until L1 is active
  KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled
  KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref
  KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused
  KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy
  KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()
  RISC-V: KVM: Restrict the extensions that can be disabled
  RISC-V: KVM: Remove 's' & 'u' as valid ISA extension

Test case 71 'Convert perf time to TSC' is not supported on s390.

Subtest 71.1 is skipped with the correct message, but subtest 71.2 is
not skipped and fails.

The root cause is function evlist__open() called from
test__perf_time_to_tsc().  evlist__open() returns -ENOENT because the
event cycles:u is not supported by the selected PMU, for example
platform s390 on z/VM or an x86_64 virtual machine.

The PMU driver returns -ENOENT in this case. This error is leads to the
failure.

Fix this by returning TEST_SKIP on -ENOENT.

Output before:
 71: Convert perf time to TSC:
 71.1: TSC support:             Skip (This architecture does not support)
 71.2: Perf time to TSC:        FAILED!

Output after:
 71: Convert perf time to TSC:
 71.1: TSC support:             Skip (This architecture does not support)
 71.2: Perf time to TSC:        Skip (perf_read_tsc_conversion is not supported)

This also happens on an x86_64 virtual machine:
   # uname -m
   x86_64
   $ ./perf test -F 71
    71: Convert perf time to TSC  :
    71.1: TSC support             : Ok
    71.2: Perf time to TSC        : FAILED!
   $

Committer testing:

Continues to work on x86_64:

  $ perf test 71
   71: Convert perf time to TSC    :
   71.1: TSC support               : Ok
   71.2: Perf time to TSC          : Ok
  $

Fixes: 290fa68b ("perf test tsc: Fix error message when not supported")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chengdong Li <chengdongli@tencent.com>
Cc: chengdongli@tencent.com
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20220420062921.1211825-1-tmricht@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since commit bb30acae ("perf report: Bail out --mem-mode if mem
info is not available") "perf mem report" and "perf report --mem-mode"
don't report result if the PERF_SAMPLE_DATA_SRC bit is missed in sample
type.

The commit ffab4870 ("perf: arm-spe: Fix perf report
--mem-mode") partially fixes the issue.  It adds PERF_SAMPLE_DATA_SRC
bit for Arm SPE event, this allows the perf data file generated by
kernel v5.18-rc1 or later version can be reported properly.

On the other hand, perf tool still fails to be backward compatibility
for a data file recorded by an older version's perf which contains Arm
SPE trace data.  This patch is a workaround in reporting phase, when
detects ARM SPE PMU event and without PERF_SAMPLE_DATA_SRC bit, it will
force to set the bit in the sample type and give a warning info.

Fixes: bb30acae ("perf report: Bail out --mem-mode if mem info is not available")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/r/20220414123201.842754-1-leo.yan@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If use command 'perf script -F,+data_src' to dump memory samples with
Arm SPE trace data, it reports error:

  # perf script -F,+data_src
  Samples for 'dummy:u' event do not have DATA_SRC attribute set. Cannot print 'data_src' field.

This is because the 'dummy:u' event is absent DATA_SRC bit in its sample
type, so if a file contains AUX area tracing data then always allow
field 'data_src' to be selected as an option for perf script.

Fixes: e55ed342 ("perf arm-spe: Synthesize memory event")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220417114837.839896-1-leo.yan@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The header TargetRegistry.h has moved in LLVM/clang 14.

Committer notes:

The problem as noticed when building in ubuntu:22.04:

    90    98.61 ubuntu:22.04                  : FAIL gcc version 11.2.0 (Ubuntu 11.2.0-19ubuntu1)
      util/c++/clang.cpp:23:10: fatal error: llvm/Support/TargetRegistry.h: No such file or directory
         23 | #include "llvm/Support/TargetRegistry.h"
            |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      compilation terminated.

Fixed after applying this patch.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://twitter.com/GuilhermeAmadio/status/1514970524232921088
Link: http://lore.kernel.org/lkml/Ylp0M/VYgHOxtcnF@gentoo.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Commit 5467801f ("gpio: Restrict usage of GPIO chip irq members
before initialization") attempted to fix a race condition that lead to a
NULL pointer, but in the process caused a regression for _AEI/_EVT
declared GPIOs.

This manifests in messages showing deferred probing while trying to
allocate IRQs like so:

  amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x0000 to IRQ, err -517
  amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x002C to IRQ, err -517
  amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x003D to IRQ, err -517
  [ .. more of the same .. ]

The code for walking _AEI doesn't handle deferred probing and so this
leads to non-functional GPIO interrupts.

Fix this issue by moving the call to `acpi_gpiochip_request_interrupts`
to occur after gc->irc.initialized is set.

Fixes: 5467801f ("gpio: Restrict usage of GPIO chip irq members before initialization")
Link: https://lore.kernel.org/linux-gpio/BL1PR12MB51577A77F000A008AA694675E2EF9@BL1PR12MB5157.namprd12.prod.outlook.com/
Link: https://bugzilla.suse.com/show_bug.cgi?id=1198697
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215850
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1979
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1976Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Shreeya Patel <shreeya.patel@collabora.com>
Tested-By: Samuel Čavoj <samuel@cavoj.net>
Tested-By: lukeluk498@gmail.com Link:
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-and-tested-by: Takashi Iwai <tiwai@suse.de>
Cc: Shreeya Patel <shreeya.patel@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull RISC-V fixes Palmer Dabbelt:

 - A pair of build fixes for the recent cpuidle driver

 - A fix for systems without sv57 that manifests as a crash
   early in boot

* tag 'riscv-for-linus-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: cpuidle: fix Kconfig select for RISCV_SBI_CPUIDLE
  RISC-V: mm: Fix set_satp_mode() for platform not having Sv57
  cpuidle: riscv: support non-SMP config

Pull arm64 fixes from Will Deacon:
 "There's no real pattern to the fixes, but the main one fixes our
  pmd_leaf() definition to resolve a NULL dereference on the migration
  path.

   - Fix PMU event validation in the absence of any event counters

   - Fix allmodconfig build using clang in conjunction with binutils

   - Fix definitions of pXd_leaf() to handle PROT_NONE entries

   - More typo fixes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: fix p?d_leaf()
  arm64: fix typos in comments
  arm64: Improve HAVE_DYNAMIC_FTRACE_WITH_REGS selection for clang
  arm_pmu: Validate single/group leader events

The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.

Fixes: 9b08aaa3 ("ARM: XEN: Move xen_early_init() before efi_init()")
Fixes: b2371587 ("arm/xen: Read extended regions from DT and init Xen resource")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>

Pull xarray fixes from Matthew Wilcox:
 "Syzbot found a nasty race between large page splitting and page
  lookup. Details in the commit log, but fortunately it has a reliable
  reproducer. I thought it better to send this one to you straight away.

  Also fix the test suite build for kmem_cache_alloc_lru()"

* tag 'xarray-5.18a' of git://git.infradead.org/users/willy/xarray:
  XArray: Disallow sibling entries of nodes
  tools: Add kmem_cache_alloc_lru()

Pull cifs fixes from Steve French:
 "Four fixes, two of them for stable:

   - fcollapse fix

   - reconnect lock fix

   - DFS oops fix

   - minor cleanup patch"

* tag '5.18-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: destage any unwritten data to the server before calling copychunk_write
  cifs: use correct lock type in cifs_reconnect()
  cifs: fix NULL ptr dereference in refresh_mounts()
  cifs: Use kzalloc instead of kmalloc/memset

Pull mount_setattr fix from Christian Brauner:
 "The recent cleanup in e257039f ("mount_setattr(): clean the
  control flow and calling conventions") switched the mount attribute
  codepaths from do-while to for loops as they are more idiomatic when
  walking mounts.

  However, we did originally choose do-while constructs because if we
  request a mount or mount tree to be made read-only we need to hold
  writers in the following way: The mount attribute code will grab
  lock_mount_hash() and then call mnt_hold_writers() which will
  _unconditionally_ set MNT_WRITE_HOLD on the mount.

  Any callers that need write access have to call mnt_want_write(). They
  will immediately see that MNT_WRITE_HOLD is set on the mount and the
  caller will then either spin (on non-preempt-rt) or wait on
  lock_mount_hash() (on preempt-rt).

  The fact that MNT_WRITE_HOLD is set unconditionally means that once
  mnt_hold_writers() returns we need to _always_ pair it with
  mnt_unhold_writers() in both the failure and success paths.

  The do-while constructs did take care of this. But Al's change to a
  for loop in the failure path stops on the first mount we failed to
  change mount attributes _without_ going into the loop to call
  mnt_unhold_writers().

  This in turn means that once we failed to make a mount read-only via
  mount_setattr() - i.e. there are already writers on that mount - we
  will block any writers indefinitely. Fix this by ensuring that the for
  loop always unsets MNT_WRITE_HOLD including the first mount we failed
  to change to read-only. Also sprinkle a few comments into the cleanup
  code to remind people about what is happening including myself. After
  all, I didn't catch it during review.

  This is only relevant on mainline and was reported by syzbot. Details
  about the syzbot reports are all in the commit message"

* tag 'fs.fixes.v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fs: unset MNT_WRITE_HOLD on failure

Pull sound fixes from Takashi Iwai:
 "At this time, the majority of changes are for pending ASoC fixes while
  a few usual HD-audio and USB-audio quirks are found.

  Almost all patches are small device-specific fixes, and nothing
  worrisome stands out, so far"

* tag 'sound-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (37 commits)
  ALSA: hda/realtek: Add quirk for Clevo NP70PNP
  ALSA: hda: intel-dsp-config: Add RaptorLake PCI IDs
  ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook 845/865 G9
  ALSA: usb-audio: Clear MIDI port active flag after draining
  ALSA: usb-audio: add mapping for MSI MAG X570S Torpedo MAX.
  ALSA: hda/i915: Fix one too many pci_dev_put()
  ALSA: hda/hdmi: add HDMI codec VID for Raptorlake-P
  ALSA: hda/hdmi: fix warning about PCM count when used with SOF
  sound/oss/dmasound: fix 'dmasound_setup' defined but not used
  firmware: cs_dsp: Fix overrun of unterminated control name string
  ASoC: codecs: Fix an error handling path in (rx|tx|va)_macro_probe()
  ASoC: Intel: sof_es8336: Add a quirk for Huawei Matebook D15
  ASoC: Intel: sof_es8336: add a quirk for headset at mic1 port
  ASoC: Intel: sof_es8336: support a separate gpio to control headphone
  ASoC: Intel: sof_es8336: simplify speaker gpio naming
  ASoC: wm8731: Disable the regulator when probing fails
  ASoC: Intel: soc-acpi: correct device endpoints for max98373
  ASoC: codecs: wcd934x: do not switch off SIDO Buck when codec is in use
  ASoC: SOF: topology: Fix memory leak in sof_control_load()
  ASoC: SOF: topology: cleanup dailinks on widget unload
  ...

There is a race between xas_split() and xas_load() which can result in
the wrong page being returned, and thus data corruption.  Fortunately,
it's hard to hit (syzbot took three months to find it) and often guarded
with VM_BUG_ON().

The anatomy of this race is:

thread A			thread B
order-9 page is stored at index 0x200
				lookup of page at index 0x274
page split starts
				load of sibling entry at offset 9
stores nodes at offsets 8-15
				load of entry at offset 8

The entry at offset 8 turns out to be a node, and so we descend into it,
and load the page at index 0x234 instead of 0x274.  This is hard to fix
on the split side; we could replace the entire node that contains the
order-9 page instead of replacing the eight entries.  Fixing it on
the lookup side is easier; just disallow sibling entries that point
to nodes.  This cannot ever be a useful thing as the descent would not
know the correct offset to use within the new node.

The test suite continues to pass, but I have not added a new test for
this bug.

Reported-by: syzbot+cf4cf13056f85dec2c40@syzkaller.appspotmail.com
Tested-by: syzbot+cf4cf13056f85dec2c40@syzkaller.appspotmail.com
Fixes: 6b24ca4a ("mm: Use multi-index entries in the page cache")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

Turn kmem_cache_alloc() into a wrapper around kmem_cache_alloc_lru().

Fixes: 9bbdc0f3 ("xarray: use kmem_cache_alloc_lru to allocate xa_node")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Li Wang <liwang@redhat.com>

Merge misc fixes from Andrew Morton:
 "13 patches.

  Subsystems affected by this patch series: mm (memory-failure, memcg,
  userfaultfd, hugetlbfs, mremap, oom-kill, kasan, hmm), and kcov"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/mmu_notifier.c: fix race in mmu_interval_notifier_remove()
  kcov: don't generate a warning on vm_insert_page()'s failure
  MAINTAINERS: add Vincenzo Frascino to KASAN reviewers
  oom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanup
  selftest/vm: add skip support to mremap_test
  selftest/vm: support xfail in mremap_test
  selftest/vm: verify remap destination address in mremap_test
  selftest/vm: verify mmap addr in mremap_test
  mm, hugetlb: allow for "high" userspace addresses
  userfaultfd: mark uffd_wp regardless of VM_WRITE flag
  memcg: sync flush only if periodic flush is delayed
  mm/memory-failure.c: skip huge_zero_page in memory_failure()
  mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()

Huge vmalloc higher-order backing pages were allocated with __GFP_COMP
in order to allow the sub-pages to be refcounted by callers such as
"remap_vmalloc_page [sic]" (remap_vmalloc_range).

However a similar problem exists for other struct page fields callers
use, for example fb_deferred_io_fault() takes a vmalloc'ed page and
not only refcounts it but uses ->lru, ->mapping, ->index.

This is not compatible with compound sub-pages, and can cause bad page
state issues like

  BUG: Bad page state in process swapper/0  pfn:00743
  page:(____ptrval____) refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x743
  flags: 0x7ffff000000000(node=0|zone=0|lastcpupid=0x7ffff)
  raw: 007ffff000000000 c00c00000001d0c8 c00c00000001d0c8 0000000000000000
  raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
  page dumped because: corrupted mapping in tail page
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc3-00082-gfc6fff4a7ce1-dirty #2810
  Call Trace:
    dump_stack_lvl+0x74/0xa8 (unreliable)
    bad_page+0x12c/0x170
    free_tail_pages_check+0xe8/0x190
    free_pcp_prepare+0x31c/0x4e0
    free_unref_page+0x40/0x1b0
    __vunmap+0x1d8/0x420
    ...

The correct approach is to use split high-order pages for the huge
vmalloc backing. These allow callers to treat them in exactly the same
way as individually-allocated order-0 pages.

Link: https://lore.kernel.org/all/14444103-d51b-0fb3-ee63-c3f182f0b546@molgen.mpg.de/Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Song Liu <songliubraving@fb.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The pmd_leaf() is used to test a leaf mapped PMD, however, it misses
the PROT_NONE mapped PMD on arm64.  Fix it.  A real world issue [1]
caused by this was reported by Qian Cai. Also fix pud_leaf().

Link: https://patchwork.kernel.org/comment/24798260/ [1]
Fixes: 8aa82df3 ("arm64: mm: add p?d_leaf() definitions")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Link: https://lore.kernel.org/r/20220422060033.48711-1-songmuchun@bytedance.comSigned-off-by: Will Deacon <will@kernel.org>

Pull drm fixes from Dave Airlie:
 "Extra quiet after Easter, only have minor i915 and msm pulls. However
  I haven't seen a PR from our misc tree in a little while, I've cc'ed
  all the suspects. Once that unblocks I expect a bit larger bunch of
  patches to arrive.

  Otherwise as I said, one msm revert and two i915 fixes.

  msm:

   - revert iommu change that broke some platforms.

  i915:

   - Unset enable_psr2_sel_fetch if PSR2 detection fails

   - Fix to detect when VRR is turned off from panel settings"

* tag 'drm-fixes-2022-04-22' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/display/psr: Unset enable_psr2_sel_fetch if other checks in intel_psr2_config_valid() fails
  drm/msm: Revert "drm/msm: Stop using iommu_present()"
  drm/i915/display/vrr: Reset VRR capable property on a long hpd

In some cases it is possible for mmu_interval_notifier_remove() to race
with mn_tree_inv_end() allowing it to return while the notifier data
structure is still in use.  Consider the following sequence:

  CPU0 - mn_tree_inv_end()            CPU1 - mmu_interval_notifier_remove()
  ----------------------------------- ------------------------------------
                                      spin_lock(subscriptions->lock);
                                      seq = subscriptions->invalidate_seq;
  spin_lock(subscriptions->lock);     spin_unlock(subscriptions->lock);
  subscriptions->invalidate_seq++;
                                      wait_event(invalidate_seq != seq);
                                      return;
  interval_tree_remove(interval_sub); kfree(interval_sub);
  spin_unlock(subscriptions->lock);
  wake_up_all();

As the wait_event() condition is true it will return immediately.  This
can lead to use-after-free type errors if the caller frees the data
structure containing the interval notifier subscription while it is
still on a deferred list.  Fix this by taking the appropriate lock when
reading invalidate_seq to ensure proper synchronisation.

I observed this whilst running stress testing during some development.
You do have to be pretty unlucky, but it leads to the usual problems of
use-after-free (memory corruption, kernel crash, difficult to diagnose
WARN_ON, etc).

Link: https://lkml.kernel.org/r/20220420043734.476348-1-apopple@nvidia.com
Fixes: 99cb252f ("mm/mmu_notifier: add an interval tree notifier")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vm_insert_page()'s failure is not an unexpected condition, so don't do
WARN_ONCE() in such a case.

Instead, print a kernel message and just return an error code.

This flaw has been reported under an OOM condition by sysbot [1].

The message is mainly for the benefit of the test log, in this case the
fuzzer's log so that humans inspecting the log can figure out what was
going on.  KCOV is a testing tool, so I think being a little more chatty
when KCOV unexpectedly is about to fail will save someone debugging
time.

We don't want the WARN, because it's not a kernel bug that syzbot should
report, and failure can happen if the fuzzer tries hard enough (as
above).

Link: https://lkml.kernel.org/r/Ylkr2xrVbhQYwNLf@elver.google.com [1]
Link: https://lkml.kernel.org/r/20220401182512.249282-1-nogikh@google.com
Fixes: b3d7fe86 ("kcov: properly handle subsequent mmap calls"),
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Taras Madan <tarasmadan@google.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add my email address to KASAN reviewers list to make sure that I am
Cc'ed in all the KASAN changes that may affect arm64 MTE.

Link: https://lkml.kernel.org/r/20220419170640.21404-1-vincenzo.frascino@arm.comSigned-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The pthread struct is allocated on PRIVATE|ANONYMOUS memory [1] which
can be targeted by the oom reaper.  This mapping is used to store the
futex robust list head; the kernel does not keep a copy of the robust
list and instead references a userspace address to maintain the
robustness during a process death.

A race can occur between exit_mm and the oom reaper that allows the oom
reaper to free the memory of the futex robust list before the exit path
has handled the futex death:

    CPU1                               CPU2
    --------------------------------------------------------------------
    page_fault
    do_exit "signal"
    wake_oom_reaper
                                        oom_reaper
                                        oom_reap_task_mm (invalidates mm)
    exit_mm
    exit_mm_release
    futex_exit_release
    futex_cleanup
    exit_robust_list
    get_user (EFAULT- can't access memory)

If the get_user EFAULT's, the kernel will be unable to recover the
waiters on the robust_list, leaving userspace mutexes hung indefinitely.

Delay the OOM reaper, allowing more time for the exit path to perform
the futex cleanup.

Reproducer: https://gitlab.com/jsavitz/oom_futex_reproducer

Based on a patch by Michal Hocko.

Link: https://elixir.bootlin.com/glibc/glibc-2.35/source/nptl/allocatestack.c#L370 [1]
Link: https://lkml.kernel.org/r/20220414144042.677008-1-npache@redhat.com
Fixes: 21292580 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Nico Pache <npache@redhat.com>
Co-developed-by: Joel Savitz <jsavitz@redhat.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Herton R. Krzesinski <herton@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allow the mremap test to be skipped due to errors such as failing to
parse the mmap_min_addr sysctl.

Link: https://lkml.kernel.org/r/20220420215721.4868-4-sidhartha.kumar@oracle.comSigned-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use ksft_test_result_xfail for the tests which are expected to fail.

Link: https://lkml.kernel.org/r/20220420215721.4868-3-sidhartha.kumar@oracle.comSigned-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Because mremap does not have a MAP_FIXED_NOREPLACE flag, it can destroy
existing mappings.  This causes a segfault when regions such as text are
remapped and the permissions are changed.

Verify the requested mremap destination address does not overlap any
existing mappings by using mmap's MAP_FIXED_NOREPLACE flag.  Keep
incrementing the destination address until a valid mapping is found or
fail the current test once the max address is reached.

Link: https://lkml.kernel.org/r/20220420215721.4868-2-sidhartha.kumar@oracle.comSigned-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Avoid calling mmap with requested addresses that are less than the
system's mmap_min_addr.  When run as root, mmap returns EACCES when
trying to map addresses < mmap_min_addr.  This is not one of the error
codes for the condition to retry the mmap in the test.

Rather than arbitrarily retrying on EACCES, don't attempt an mmap until
addr > vm.mmap_min_addr.

Add a munmap call after an alignment check as the mappings are retained
after the retry and can reach the vm.max_map_count sysctl.

Link: https://lkml.kernel.org/r/20220420215721.4868-1-sidhartha.kumar@oracle.comSigned-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is a fix for commit f6795053 ("mm: mmap: Allow for "high"
userspace addresses") for hugetlb.

This patch adds support for "high" userspace addresses that are
optionally supported on the system and have to be requested via a hint
mechanism ("high" addr parameter to mmap).

Architectures such as powerpc and x86 achieve this by making changes to
their architectural versions of hugetlb_get_unmapped_area() function.
However, arm64 uses the generic version of that function.

So take into account arch_get_mmap_base() and arch_get_mmap_end() in
hugetlb_get_unmapped_area().  To allow that, move those two macros out
of mm/mmap.c into include/linux/sched/mm.h

If these macros are not defined in architectural code then they default
to (TASK_SIZE) and (base) so should not introduce any behavioural
changes to architectures that do not define them.

For the time being, only ARM64 is affected by this change.

Catalin (ARM64) said
 "We should have fixed hugetlb_get_unmapped_area() as well when we added
  support for 52-bit VA. The reason for commit f6795053 was to
  prevent normal mmap() from returning addresses above 48-bit by default
  as some user-space had hard assumptions about this.

  It's a slight ABI change if you do this for hugetlb_get_unmapped_area()
  but I doubt anyone would notice. It's more likely that the current
  behaviour would cause issues, so I'd rather have them consistent.

  Basically when arm64 gained support for 52-bit addresses we did not
  want user-space calling mmap() to suddenly get such high addresses,
  otherwise we could have inadvertently broken some programs (similar
  behaviour to x86 here). Hence we added commit f6795053. But we
  missed hugetlbfs which could still get such high mmap() addresses. So
  in theory that's a potential regression that should have bee addressed
  at the same time as commit f6795053 (and before arm64 enabled
  52-bit addresses)"

Link: https://lkml.kernel.org/r/ab847b6edb197bffdfe189e70fb4ac76bfe79e0d.1650033747.git.christophe.leroy@csgroup.eu
Fixes: f6795053 ("mm: mmap: Allow for "high" userspace addresses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>	[5.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>