- 21 Jul, 2021 23 commits
-
-
Vincent Palatin authored
This reverts commit 0bd86049. While the patch was working as stated,ie preventing the L850-GL LTE modem from crashing on some U3 wake-ups due to a race condition between the host wake-up and the modem-side wake-up, when using the MBIM interface, this would force disabling the USB runtime PM on the device. The increased power consumption is significant for LTE laptops, and given that with decently recent modem firmwares, when the modem hits the bug, it automatically recovers (ie it drops from the bus, but automatically re-enumerates after less than half a second, rather than being stuck until a power cycle as it was doing with ancient firmware), for most people, the trade-off now seems in favor of re-enabling it by default. For people with access to the platform code, the bug can also be worked-around successfully by changing the USB3 LFPM polling off-time for the XHCI controller in the BIOS code. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Link: https://lore.kernel.org/r/20210721092516.2775971-1-vpalatin@chromium.org Fixes: 0bd86049 ("USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wei Yongjun authored
Gcc report build error as following when CONFIG_WWAN_CORE is not set: x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_disconnect': cdc-wdm.c:(.text+0xb2a): undefined reference to `wwan_remove_port' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_in_callback': cdc-wdm.c:(.text+0xf23): undefined reference to `wwan_port_rx' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_stop': cdc-wdm.c:(.text+0x127d): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx': cdc-wdm.c:(.text+0x12d9): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x13c1): undefined reference to `wwan_port_txoff' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_start': cdc-wdm.c:(.text+0x13e0): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x1431): undefined reference to `wwan_port_txon' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx_complete': cdc-wdm.c:(.text+0x14a4): undefined reference to `wwan_port_txon' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_create.cold': cdc-wdm.c:(.text.unlikely+0x209): undefined reference to `wwan_create_port' Using CONFIG_WWAN_CORE instead of CONFIG_WWAN to avoid build error. Fixes: cac6fb01 ("usb: class: cdc-wdm: WWAN framework integration") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210521021010.2490930-1-weiyongjun1@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This reverts commit eb9b7bfd as it breaks working userspace implementations (i.e. Android systems) The device node name here is part of configfs, so it is a user-visable api that can not be changed. Reported-by: John Stultz <john.stultz@linaro.org> Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/CALAqxLX_FNvFndEDWtGbFPjSzuAbfqxQE07diBJFZtftwEJX5A@mail.gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Minas Harutyunyan authored
Sending zero length packet in DDMA mode perform by DMA descriptor by setting SP (short packet) flag. For DDMA in function dwc2_hsotg_complete_in() does not need to send zlp. Tested by USBCV MSC tests. Fixes: f71b5e25 ("usb: dwc2: gadget: fix zero length packet transfers") Cc: stable <stable@vger.kernel.org> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/967bad78c55dd2db1c19714eee3d0a17cf99d74a.1626777738.git.Minas.Harutyunyan@synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marek Szyprowski authored
Commit 0112b7ce ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.") changed the way the driver handles power down modes in a such way that it uses clock gating when no other power down mode is available. This however doesn't work well on the DWC2 implementation used on the Samsung SoCs. When a clock gating is enabled, system hangs. It looks that the proper clock gating requires some additional glue code in the shared USB2 PHY and/or Samsung glue code for the DWC2. To restore driver operation on the Samsung SoCs simply skip enabling clock gating mode until one finds what is really needed to make it working reliably. Fixes: 0112b7ce ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.") Cc: stable <stable@vger.kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20210716050127.4406-1-m.szyprowski@samsung.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yoshihiro Shimoda authored
This driver has a potential issue which this driver is possible to cause superfluous irqs after usb_pkt_pop() is called. So, after the commit 3af32605 ("usb: renesas_usbhs: fix error return code of usbhsf_pkt_handler()") had been applied, we could observe the following error happened when we used g_audio. renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22 To fix the issue, disable the tx or rx interrupt in usb_pkt_pop(). Fixes: 2743e7f9 ("usb: renesas_usbhs: fix the usb_pkt_pop()") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210624122039.596528-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Minas Harutyunyan authored
Because of dwc2_hsotg_ep_stop_xfr() function uses poll mode, first need to mask GINTSTS_GOUTNAKEFF interrupt. In Slave mode GINTSTS_GOUTNAKEFF interrupt will be aserted only after pop OUT NAK status packet from RxFIFO. In dwc2_hsotg_ep_sethalt() function before setting DCTL_SGOUTNAK need to unmask GOUTNAKEFF interrupt. Tested by USBCV CH9 and MSC tests set in Slave, BDMA and DDMA. All tests are passed. Fixes: a4f82771 ("usb: dwc2: gadget: Disable enabled HW endpoint in dwc2_hsotg_ep_disable") Fixes: 6070636c ("usb: dwc2: Fix Stalling a Non-Isochronous OUT EP") Cc: stable <stable@vger.kernel.org> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/e17fad802bbcaf879e1ed6745030993abb93baf8.1626152924.git.Minas.Harutyunyan@synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Artur Petrosyan authored
When the dwc2 platform device is removed, it unregisters the generic phy. usb_remove_phy() is called and the dwc2 usb_phy is removed from the "phy_list", but the uevent may still attempt to get the usb_phy from the list, resulting in a page fault bug. Currently we can't access the usb_phy from the "phy_list" after the device is removed. As a fix check to make sure that we can get the usb_phy before moving forward with the uevent. [ 84.949345] BUG: unable to handle page fault for address:00000007935688d8 [ 84.949349] #PF: supervisor read access in kernel mode [ 84.949351] #PF: error_code(0x0000) - not-present page [ 84.949353] PGD 0 P4D 0 [ 84.949356] Oops: 0000 [#1] SMP PTI [ 84.949360] CPU: 2 PID: 2081 Comm: rmmod Not tainted 5.13.0-rc4-snps-16547-ga8534cb0-dirty #32 [ 84.949363] Hardware name: Hewlett-Packard HP Z400 Workstation/0B4Ch, BIOS 786G3 v03.54 11/02/2011 [ 84.949365] RIP: 0010:usb_phy_uevent+0x99/0x121 [ 84.949372] Code: 8d 83 f8 00 00 00 48 3d b0 12 22 94 74 05 4c 3b 23 75 5b 8b 83 9c 00 00 00 be 32 00 00 00 48 8d 7c 24 04 48 c7 c2 d4 5d 7b 93 <48> 8b 0c c5 e0 88 56 93 e8 0f 63 8a ff 8b 83 98 00 00 00 be 32 00 [ 84.949375] RSP: 0018:ffffa46bc0f2fc70 EFLAGS: 00010246 [ 84.949378] RAX: 00000000ffffffff RBX: ffffffff942211b8 RCX: 0000000000000027 [ 84.949380] RDX: ffffffff937b5dd4 RSI: 0000000000000032 RDI: ffffa46bc0f2fc74 [ 84.949383] RBP: ffff94a306613000 R08: 0000000000000000 R09: 00000000fffeffff [ 84.949385] R10: ffffa46bc0f2faa8 R11: ffffa46bc0f2faa0 R12: ffff94a30186d410 [ 84.949387] R13: ffff94a32d188a80 R14: ffff94a30029f960 R15: ffffffff93522dd0 [ 84.949389] FS: 00007efdbd417540(0000) GS:ffff94a513a80000(0000) knlGS:0000000000000000 [ 84.949392] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 84.949394] CR2: 00000007935688d8 CR3: 0000000165606000 CR4: 00000000000006e0 [ 84.949396] Call Trace: [ 84.949401] dev_uevent+0x190/0x1ad [ 84.949408] kobject_uevent_env+0x18e/0x46c [ 84.949414] device_release_driver_internal+0x17f/0x18e [ 84.949418] bus_remove_device+0xd3/0xe5 [ 84.949421] device_del+0x1c3/0x31d [ 84.949425] ? kobject_put+0x97/0xa8 [ 84.949428] platform_device_del+0x1c/0x63 [ 84.949432] platform_device_unregister+0xa/0x11 [ 84.949436] dwc2_pci_remove+0x1e/0x2c [dwc2_pci] [ 84.949440] pci_device_remove+0x31/0x81 [ 84.949445] device_release_driver_internal+0xea/0x18e [ 84.949448] driver_detach+0x68/0x72 [ 84.949450] bus_remove_driver+0x63/0x82 [ 84.949453] pci_unregister_driver+0x1a/0x75 [ 84.949457] __do_sys_delete_module+0x149/0x1e9 [ 84.949462] ? task_work_run+0x64/0x6e [ 84.949465] ? exit_to_user_mode_prepare+0xd4/0x10d [ 84.949471] do_syscall_64+0x5d/0x70 [ 84.949475] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 84.949480] RIP: 0033:0x7efdbd563bcb [ 84.949482] Code: 73 01 c3 48 8b 0d c5 82 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 95 82 0c 00 f7 d8 64 89 01 48 [ 84.949485] RSP: 002b:00007ffe944d7d98 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 84.949489] RAX: ffffffffffffffda RBX: 00005651072eb700 RCX: 00007efdbd563bcb [ 84.949491] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005651072eb768 [ 84.949493] RBP: 00007ffe944d7df8 R08: 0000000000000000 R09: 0000000000000000 [ 84.949495] R10: 00007efdbd5dfac0 R11: 0000000000000206 R12: 00007ffe944d7fd0 [ 84.949497] R13: 00007ffe944d8610 R14: 00005651072eb2a0 R15: 00005651072eb700 [ 84.949500] Modules linked in: uas configfs dwc2_pci(-) phy_generic fuse crc32c_intel [last unloaded: udc_core] [ 84.949508] CR2: 00000007935688d8 [ 84.949510] ---[ end trace e40c871ca3e4dc9e ]--- [ 84.949512] RIP: 0010:usb_phy_uevent+0x99/0x121 Fixes: a8534cb0 ("usb: phy: introduce usb_phy device type with its own uevent handler") Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20210710092247.D7AFEA005D@mailhost.synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Thelen authored
Commit a66d21d7 ("usb: xhci: Add support for Renesas controller with memory") added renesas_usb_fw.mem firmware reference to xhci-pci. Thus modinfo indicates xhci-pci.ko has "firmware: renesas_usb_fw.mem". But the firmware is only actually used with CONFIG_USB_XHCI_PCI_RENESAS. An unusable firmware reference can trigger safety checkers which look for drivers with unmet firmware dependencies. Avoid referring to renesas_usb_fw.mem in circumstances when it cannot be loaded (when CONFIG_USB_XHCI_PCI_RENESAS isn't set). Fixes: a66d21d7 ("usb: xhci: Add support for Renesas controller with memory") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Thelen <gthelen@google.com> Link: https://lore.kernel.org/r/20210702071224.3673568-1-gthelen@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
Loading and then unloading module g_dpgp on a VM that does not support the driver currently throws a WARN_ON message because the port has not been initialized. Removing an unused driver is a valid use-case and the WARN_ON kernel warning is a bit excessive, so remove it. Cleans up: [27654.638698] ------------[ cut here ]------------ [27654.638705] WARNING: CPU: 6 PID: 2956336 at drivers/usb/gadget/function/u_serial.c:1201 gserial_free_line+0x7c/0x90 [u_serial] [27654.638728] Modules linked in: g_dbgp(-) u_serial usb_f_tcm target_core_mod libcomposite udc_core vmw_vmci mcb i2c_nforce2 i2c_amd756 nfit cx8800 videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 cx88xx tveeprom videobuf2_common videodev mc ccp hid_generic hid intel_ishtp cros_ec mc13xxx_core vfio_mdev mdev i915 i2c_algo_bit kvm ppdev parport zatm eni suni uPD98402 atm rio_scan binder_linux hwmon_vid video ipmi_devintf ipmi_msghandler zstd nls_utf8 decnet qrtr ns sctp ip6_udp_tunnel udp_tunnel fcrypt pcbc nhc_udp nhc_ipv6 nhc_routing nhc_mobility nhc_hop nhc_dest nhc_fragment 6lowpan ts_kmp dccp_ipv6 dccp_ipv4 dccp snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq_dummy snd_seq snd_seq_device xen_front_pgdir_shbuf binfmt_misc nls_iso8859_1 dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua intel_rapl_msr intel_rapl_common snd_hda_codec_generic ledtrig_audio snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd rapl soundcore joydev input_leds mac_hid serio_raw efi_pstore [27654.638880] qemu_fw_cfg sch_fq_codel msr virtio_rng autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear qxl drm_ttm_helper crct10dif_pclmul ttm drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops cec net_failover rc_core ahci psmouse drm libahci lpc_ich virtio_blk failover [last unloaded: u_ether] [27654.638949] CPU: 6 PID: 2956336 Comm: modprobe Tainted: P O 5.13.0-9-generic #9 [27654.638956] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [27654.638969] RIP: 0010:gserial_free_line+0x7c/0x90 [u_serial] [27654.638981] Code: 20 00 00 00 00 e8 74 1a ba c9 4c 89 e7 e8 8c fe ff ff 48 8b 3d 75 3b 00 00 44 89 f6 e8 3d 7c 69 c9 5b 41 5c 41 5d 41 5e 5d c3 <0f> 0b 4c 89 ef e8 4a 1a ba c9 5b 41 5c 41 5d 41 5e 5d c3 90 0f 1f [27654.638986] RSP: 0018:ffffba0b81403da0 EFLAGS: 00010246 [27654.638992] RAX: 0000000000000000 RBX: ffffffffc0eaf6a0 RCX: 0000000000000000 [27654.638996] RDX: ffff8e21c0cac8c0 RSI: 0000000000000006 RDI: ffffffffc0eaf6a0 [27654.639000] RBP: ffffba0b81403dc0 R08: ffffba0b81403de0 R09: fefefefefefefeff [27654.639003] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [27654.639006] R13: ffffffffc0eaf6a0 R14: 0000000000000000 R15: 0000000000000000 [27654.639010] FS: 00007faa1935e740(0000) GS:ffff8e223bd80000(0000) knlGS:0000000000000000 [27654.639015] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [27654.639019] CR2: 00007ffc840cd4e8 CR3: 000000000e1ac006 CR4: 0000000000370ee0 [27654.639028] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [27654.639031] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [27654.639035] Call Trace: [27654.639044] dbgp_exit+0x1c/0xa1a [g_dbgp] [27654.639054] __do_sys_delete_module.constprop.0+0x144/0x260 [27654.639066] ? call_rcu+0xe/0x10 [27654.639073] __x64_sys_delete_module+0x12/0x20 [27654.639081] do_syscall_64+0x61/0xb0 [27654.639092] ? exit_to_user_mode_loop+0xec/0x160 [27654.639098] ? exit_to_user_mode_prepare+0x37/0xb0 [27654.639104] ? syscall_exit_to_user_mode+0x27/0x50 [27654.639110] ? __x64_sys_close+0x12/0x40 [27654.639119] ? do_syscall_64+0x6e/0xb0 [27654.639126] ? exit_to_user_mode_prepare+0x37/0xb0 [27654.639132] ? syscall_exit_to_user_mode+0x27/0x50 [27654.639137] ? __x64_sys_newfstatat+0x1e/0x20 [27654.639146] ? do_syscall_64+0x6e/0xb0 [27654.639154] ? exc_page_fault+0x8f/0x170 [27654.639159] ? asm_exc_page_fault+0x8/0x30 [27654.639166] entry_SYSCALL_64_after_hwframe+0x44/0xae [27654.639173] RIP: 0033:0x7faa194a4b2b [27654.639179] Code: 73 01 c3 48 8b 0d 3d 73 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0d 73 0c 00 f7 d8 64 89 01 48 [27654.639185] RSP: 002b:00007ffc840d0578 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [27654.639191] RAX: ffffffffffffffda RBX: 000056060f9f4e70 RCX: 00007faa194a4b2b [27654.639194] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000056060f9f4ed8 [27654.639197] RBP: 000056060f9f4e70 R08: 0000000000000000 R09: 0000000000000000 [27654.639200] R10: 00007faa1951eac0 R11: 0000000000000206 R12: 000056060f9f4ed8 [27654.639203] R13: 0000000000000000 R14: 000056060f9f4ed8 R15: 00007ffc840d06c8 [27654.639219] ---[ end trace 8dd0ea0bb32ce94a ]--- Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210701144305.110078-1-colin.king@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linyu Yuan authored
we found crash in dwc3_disconnect_gadget(), it is because dwc->gadget_driver become NULL before async access. 7dc0c55e ('USB: UDC core: Add udc_async_callbacks gadget op') suggest a common way to avoid such kind of issue. this change implment the callback in dwc3 and change related functions which have callback to usb gadget driver. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org> Link: https://lore.kernel.org/r/20210629015118.7944-1-linyyuan@codeaurora.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Tomlinson authored
The MAX-3421 USB driver remembers the state of the USB toggles for a device/endpoint. To save SPI writes, this was only done when a new device/endpoint was being used. Unfortunately, if the old device was removed, this would cause writes to freed memory. To fix this, a simpler scheme is used. The toggles are read from hardware when a URB is completed, and the toggles are always written to hardware when any URB transaction is started. This will cause a few more SPI transactions, but no causes kernel panics. Fixes: 2d53139f ("Add support for using a MAX3421E chip as a host driver.") Cc: stable <stable@vger.kernel.org> Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nzSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhang Qilong authored
Add missing pm_runtime_disable() when probe error out. It could avoid pm_runtime implementation complains when removing and probing again the driver. Fixes: 49db4272 ("usb: gadget: Add UDC driver for tegra XUSB device mode controller") Cc: stable <stable@vger.kernel.org> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20210618141441.107817-1-zhangqilong3@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lukas Bulwahn authored
Commit 8de6b7ed ("phy: phy-hi3670-usb3: move driver from staging into phy") moves phy-hi3670-usb3.c from ./drivers/staging/hikey9xx/ to ./drivers/phy/hisilicon/, but the new file entry in MAINTAINERS refers to ./drivers/phy/hisilicon/phy-kirin970-usb3.c. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: drivers/phy/hisilicon/phy-kirin970-usb3.c Repair the file entry by referring to the right location. Fixes: 8de6b7ed ("phy: phy-hi3670-usb3: move driver from staging into phy") Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20210701093903.28733-1-lukas.bulwahn@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Amelie Delaunay authored
Similar as with tcpm this patch lets fw_devlink know not to wait on the fwnode to be populated as a struct device. Without this patch, USB functionality can be broken on some previously supported boards. Fixes: 28ec344b ("usb: typec: tcpm: Don't block probing of consumers of "connector" nodes") Cc: stable <stable@vger.kernel.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210716120718.20398-3-amelie.delaunay@foss.st.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Amelie Delaunay authored
During interrupt registration, attach state is checked. If attached, then the Type-C state is updated with typec_set_xxx functions and role switch is set with usb_role_switch_set_role(). If the usb_role_switch parameter is error or null, the function simply returns 0. So, to update usb_role_switch role if a device is attached before the irq is registered, usb_role_switch must be registered before irq registration. Fixes: da0cb631 ("usb: typec: add support for STUSB160x Type-C controller family") Cc: stable <stable@vger.kernel.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210716120718.20398-2-amelie.delaunay@foss.st.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Julian Sikorski authored
LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates errors like: [ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN [ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00 [ 1151.588594] scsi host14: uas_eh_device_reset_handler start [ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1151.741398] scsi host14: uas_eh_device_reset_handler success [ 1181.785534] scsi host14: uas_eh_device_reset_handler start Signed-off-by: Julian Sikorski <belegdol+github@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210720171910.36497-1-belegdol+github@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Jeffery authored
When MSI is used by the ehci-hcd driver, it can cause lost interrupts which results in EHCI only continuing to work due to a polling fallback. But the reliance of polling drastically reduces performance of any I/O through EHCI. Interrupts are lost as the EHCI interrupt handler does not safely handle edge-triggered interrupts. It fails to ensure all interrupt status bits are cleared, which works with level-triggered interrupts but not the edge-triggered interrupts typical from using MSI. To fix this problem, check if the driver may have raced with the hardware setting additional interrupt status bits and clear status until it is in a stable state. Fixes: 306c54d0 ("usb: hcd: Try MSI interrupts on PCI devices") Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: David Jeffery <djeffery@redhat.com> Link: https://lore.kernel.org/r/20210715213744.GA44506@redhat Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
The device initiated link power management U1/U2 states should not be enabled in case the system exit latency plus one bus interval (125us) is greater than the shortest service interval of any periodic endpoint. This is the case for both U1 and U2 sytstem exit latencies and link states. See USB 3.2 section 9.4.9 "Set Feature" for more details Note, before this patch the host and device initiated U1/U2 lpm states were both enabled with lpm. After this patch it's possible to end up with only host inititated U1/U2 lpm in case the exit latencies won't allow device initiated lpm. If this case we still want to set the udev->usb3_lpm_ux_enabled flag so that sysfs users can see the link may go to U1/U2. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210715150122.1995966-2-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
Maximum Exit Latency (MEL) value is used by host to know how much in advance it needs to start waking up a U1/U2 suspended link in order to service a periodic transfer in time. Current MEL calculation only includes the time to wake up the path from U1/U2 to U0. This is called tMEL1 in USB 3.1 section C 1.5.2 Total MEL = tMEL1 + tMEL2 +tMEL3 + tMEL4 which should additinally include: - tMEL2 which is the time it takes for PING message to reach device - tMEL3 time for device to process the PING and submit a PING_RESPONSE - tMEL4 time for PING_RESPONSE to traverse back upstream to host. Add the missing tMEL2, tMEL3 and tMEL4 to MEL calculation. Cc: <stable@kernel.org> # v3.5 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210715150122.1995966-1-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Kepplinger authored
Similar as with tcpm this patch lets fw_devlink know not to wait on the fwnode to be populated as a struct device. Without this patch, USB functionality can be broken on some previously supported boards. Fixes: 28ec344b ("usb: typec: tcpm: Don't block probing of consumers of "connector" nodes") Cc: stable <stable@vger.kernel.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Link: https://lore.kernel.org/r/20210714061807.5737-1-martin.kepplinger@puri.smSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
There's a small window where a USB 2 remote wake may be left unhandled due to a race between hub thread and xhci port event interrupt handler. When the resume event is detected in the xhci interrupt handler it kicks the hub timer, which should move the port from resume to U0 once resume has been signalled for long enough. To keep the hub "thread" running we set a bus_state->resuming_ports flag. This flag makes sure hub timer function kicks itself. checking this flag was not properly protected by the spinlock. Flag was copied to a local variable before lock was taken. The local variable was then checked later with spinlock held. If interrupt is handled right after copying the flag to the local variable we end up stopping the hub thread before it can handle the USB 2 resume. CPU0 CPU1 (hub thread) (xhci event handler) xhci_hub_status_data() status = bus_state->resuming_ports; <Interrupt> handle_port_status() spin_lock() bus_state->resuming_ports = 1 set_flag(HCD_FLAG_POLL_RH) spin_unlock() spin_lock() if (!status) clear_flag(HCD_FLAG_POLL_RH) spin_unlock() Fix this by taking the lock a bit earlier so that it covers the resuming_ports flag copy in the hub thread Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210715150651.1996099-2-mathias.nyman@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Moritz Fischer authored
This reverts commit d143825b. Justin reports some of his systems now fail as result of this commit: xhci_hcd 0000:04:00.0: Direct firmware load for renesas_usb_fw.mem failed with error -2 xhci_hcd 0000:04:00.0: request_firmware failed: -2 xhci_hcd: probe of 0000:04:00.0 failed with error -2 The revert brings back the original issue the commit tried to solve but at least unbreaks existing systems relying on previous behavior. Cc: stable@vger.kernel.org Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Justin Forbes <jmforbes@linuxtx.org> Reported-by: Justin Forbes <jmforbes@linuxtx.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Fixes: d143825b ("usb: renesas-xhci: Fix handling of unknown ROM state") Link: https://lore.kernel.org/r/20210719070519.41114-1-mdf@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 12 Jul, 2021 1 commit
-
-
Alan Stern authored
When the user submits a control URB via usbfs, the user supplies the bRequestType value and the kernel uses it to compute the pipe value. However, do_proc_control() performs this computation incorrectly in the case where the bRequestType direction bit is set to USB_DIR_IN and the URB's transfer length is 0: The pipe's direction is also set to IN but it should be OUT, which is the direction the actual transfer will use regardless of bRequestType. Commit 5cc59c41 ("USB: core: WARN if pipe direction != setup packet direction") added a check to compare the direction bit in the pipe value to a control URB's actual direction and to WARN if they are different. This can be triggered by the incorrect computation mentioned above, as found by syzbot. This patch fixes the computation, thus avoiding the WARNing. Reported-and-tested-by: syzbot+72af3105289dcb4c055b@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210712185436.GB326369@rowland.harvard.eduSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 11 Jul, 2021 11 commits
-
-
Linus Torvalds authored
-
Hugh Dickins authored
I know nothing about zone_device pages and !device_private pages; but if try_to_migrate_one() will do nothing for them, then it's better that try_to_migrate() filter them first, than trawl through all their vmas. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Link: https://lore.kernel.org/lkml/1241d356-8ec9-f47b-a5ec-9b2bf66d242@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
In the unlikely race case that page_mlock_one() finds VM_LOCKED has been cleared by the time it got page table lock, page_vma_mapped_walk_done() must be called before returning, either explicitly, or by a final call to page_vma_mapped_walk() - otherwise the page table remains locked. Fixes: cd62734c ("mm/rmap: split try_to_munlock from try_to_unmap") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/lkml/20210711151446.GB4070@xsang-OptiPlex-9020/ Link: https://lore.kernel.org/lkml/f71f8523-cba7-3342-40a7-114abc5d1f51@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
The kernel recovers in due course from missing Mlocked pages: but there was no point in calling page_mlock() (formerly known as try_to_munlock()) on a THP, because nothing got done even when it was found to be mapped in another VM_LOCKED vma. It's true that we need to be careful: Mlocked accounting of pte-mapped THPs is too difficult (so consistently avoided); but Mlocked accounting of only-pmd-mapped THPs is supposed to work, even when multiple mappings are mlocked and munlocked or munmapped. Refine the tests. There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so page_mlock_one() does not even have to worry about that complication. (I said the kernel recovers: but would page reclaim be likely to split THP before rediscovering that it's VM_LOCKED? I've not followed that up) Fixes: 9a73f61b ("thp, mlock: do not mlock PTE-mapped file huge pages") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Parallel developments in mm/rmap.c have left behind some out-of-date comments: try_to_migrate_one() also accepts TTU_SYNC (already commented in try_to_migrate() itself), and try_to_migrate() returns nothing at all. TTU_SPLIT_FREEZE has just been deleted, so reword the comment about it in mm/huge_memory.c; and TTU_IGNORE_ACCESS was removed in 5.11, so delete the "recently referenced" comment from try_to_unmap_one() (once upon a time the comment was near the removed codeblock, but they drifted apart). Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Link: https://lore.kernel.org/lkml/563ce5b2-7a44-5b4d-1dfd-59a0e65932a9@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Ingo Molnar: "Two fixes: - Fix a MIPS IRQ handling RCU bug - Remove a DocBook annotation for a parameter that doesn't exist anymore" * tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry genirq/irqdesc: Drop excess kernel-doc entry @lookup
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Three fixes: - Fix load tracking bug/inconsistency - Fix a sporadic CFS bandwidth constraints enforcement bug - Fix a uclamp utilization tracking bug for newly woken tasks" * tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/uclamp: Ignore max aggregation if rq is idle sched/fair: Fix CFS bandwidth hrtimer expiry type sched/fair: Sync load_sum with load_avg after dequeue
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "A fix and a hardware-enablement addition: - Robustify uncore_snbep's skx_iio_set_mapping()'s error cleanup - Add cstate event support for Intel ICELAKE_X and ICELAKE_D" * tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Clean up error handling path of iio mapping perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: - Fix a Sparc crash - Fix a number of objtool warnings - Fix /proc/lockdep output on certain configs - Restore a kprobes fail-safe * tag 'locking-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomic: sparc: Fix arch_cmpxchg64_local() kprobe/static_call: Restore missing static_call_text_reserved() static_call: Fix static_call_text_reserved() vs __init jump_label: Fix jump_label_text_reserved() vs __init locking/lockdep: Fix meaningless /proc/lockdep output of lock classes on !CONFIG_PROVE_LOCKING
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is a set of minor fixes and clean ups in the core and various drivers. The only core change in behaviour is the I/O retry for spinup notify, but that shouldn't impact anything other than the failing case" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits) scsi: virtio_scsi: Add validation for residual bytes from response scsi: ipr: System crashes when seeing type 20 error scsi: core: Retry I/O for Notify (Enable Spinup) Required error scsi: mpi3mr: Fix warnings reported by smatch scsi: qedf: Add check to synchronize abort and flush scsi: MAINTAINERS: Add mpi3mr driver maintainers scsi: libfc: Fix array index out of bound exception scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro scsi: qedf: Use DEVICE_ATTR_RO() macro scsi: qedi: Use DEVICE_ATTR_RO() macro scsi: message: mptfc: Switch from pci_ to dma_ API scsi: be2iscsi: Fix some missing space in some messages scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe() scsi: ufs: Fix build warning without CONFIG_PM scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment scsi: qla2xxx: Add heartbeat check scsi: virtio_scsi: Do not overwrite SCSI status scsi: libsas: Add LUN number check in .slave_alloc callback scsi: core: Inline scsi_mq_alloc_queue() ...
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tool updates from Arnaldo Carvalho de Melo: "New features: - Enable use of BPF counters with 'perf stat --for-each-cgroup', using per-CPU 'cgroup-switch' events with an attached BPF program that does aggregation per-cgroup in the kernel instead of using per-cgroup perf events. - Add Topdown metrics L2 events as default events in 'perf stat' for systems having those events. Hardware tracing: - Add a config for max loops without consuming a packet in the Intel PT packet decoder, set via 'perf config intel-pt.max-loops=N' Hardware enablement: - Disable misleading NMI watchdog message in 'perf stat' on hybrid systems such as Intel Alder Lake. - Add a dummy event on hybrid systems to collect metadata records. - Add 24x7 nest metric events for the Power10 platform. Fixes: - Fix event parsing for PMUs starting with the same prefix. - Fix the 'perf trace' 'trace' alias installation dir. - Fix buffer size to report iregs in perf script python scripts, supporting the extended registers in PowerPC. - Fix overflow in elf_sec__is_text(). - Fix 's' on source line when disasm is empty in the annotation TUI, accessible via 'perf annotate', 'perf report' and 'perf top'. - Plug leaks in scandir() returned dirent entries in 'perf test' when sorting the shell tests. - Fix --task and --stat with pipe input in 'perf report'. - Fix 'perf probe' use of debuginfo files by build id. - If a DSO has both dynsym and symtab ELF sections, read from both when loading the symbol table, fixing a problem processing Fedora 32 glibc DSOs. Libraries: - Add grouping of events to libperf, from code in tools/perf, allowing libperf users to use that mode. Misc: - Filter plt stubs from the 'perf probe --functions' output. - Update UAPI header copies for asound, DRM, mman-common.h and the ones affected by the quotactl_fd syscall" * tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits) perf test: Add free() calls for scandir() returned dirent entries libperf: Add tests for perf_evlist__set_leader() libperf: Remove BUG_ON() from library code in get_group_fd() libperf: Add group support to perf_evsel__open() perf tools: Fix pattern matching for same substring in different PMU type perf record: Add a dummy event on hybrid systems to collect metadata records perf stat: Add Topdown metrics L2 events as default events libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader() libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups libperf: Move 'leader' from tools/perf to perf_evsel::leader libperf: Move 'idx' from tools/perf to perf_evsel::idx libperf: Change tests to single static and shared binaries perf intel-pt: Add a config for max loops without consuming a packet perf stat: Disable the NMI watchdog message on hybrid perf vendor events power10: Adds 24x7 nest metric events for power10 platform perf script python: Fix buffer size to report iregs in perf script perf trace: Fix the perf trace link location perf top: Fix overflow in elf_sec__is_text() perf annotate: Fix 's' on source line when disasm is empty perf probe: Do not show @plt function by default ...
-
- 10 Jul, 2021 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "Mostly documentation/comment changes and non urgent fixes. - add or fix SPDX identifiers - NXP pcf*: fix datasheet URLs - imxdi: add wakeup support - pcf2127: handle timestamp interrupts, this fixes a possible interrupt storm - bd70528: Drop BD70528 support" * tag 'rtc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits) rtc: pcf8523: rename register and bit defines rtc: pcf2127: handle timestamp interrupts rtc: at91sam9: Remove unnecessary offset variable checks rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt() rtc: spear: convert to SPDX identifier rtc: tps6586x: convert to SPDX identifier rtc: tps80031: convert to SPDX identifier rtc: rtd119x: Fix format of SPDX identifier rtc: sc27xx: Fix format of SPDX identifier rtc: palmas: convert to SPDX identifier rtc: max6900: convert to SPDX identifier rtc: ds1374: convert to SPDX identifier rtc: au1xxx: convert to SPDX identifier rtc: pcf85063: Update the PCF85063A datasheet revision dt-bindings: rtc: ti,bq32k: take maintainership rtc: pcf8563: Fix the datasheet URL rtc: pcf85063: Fix the datasheet URL rtc: pcf2127: Fix the datasheet URL dt-bindings: rtc: ti,bq32k: Convert to json-schema dt-bindings: rtc: rx8900: Convert to YAML schema ...
-
Mel Gorman authored
Commit dbbee9d5 ("mm/page_alloc: convert per-cpu list protection to local_lock") folded in a workaround patch for pahole that was unable to deal with zero-sized percpu structures. A superior workaround is achieved with commit a0b8200d ("kbuild: skip per-CPU BTF generation for pahole v1.18-v1.21"). This patch reverts the dummy field and the pahole version check. Fixes: dbbee9d5 ("mm/page_alloc: convert per-cpu list protection to local_lock") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Belloni authored
arch/arm/mach-ixp4xx/include/mach/platform.h now gets included indirectly and defines REG_OFFSET. Rename the register and bit definition to something specific to the driver. Fixes: 7fd70c65 ("ARM: irqstat: Get rid of duplicated declaration") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210710211431.1393589-1-alexandre.belloni@bootlin.com
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "13 cifs/smb3 fixes. Most are to address minor issues pointed out by Coverity. Also includes a packet signing enhancement and mount improvement" * tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal version number cifs: prevent NULL deref in cifs_compose_mount_options() SMB3.1.1: Add support for negotiating signing algorithm cifs: use helpers when parsing uid/gid mount options and validate them CIFS: Clarify SMB1 code for POSIX Lock CIFS: Clarify SMB1 code for rename open file CIFS: Clarify SMB1 code for delete CIFS: Clarify SMB1 code for SetFileSize smb3: fix typo in header file CIFS: Clarify SMB1 code for UnixSetPathInfo CIFS: Clarify SMB1 code for UnixCreateSymLink cifs: clarify SMB1 code for UnixCreateHardLink cifs: make locking consistent around the server session status
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull pci fix from Bjorn Helgaas: "Revert host bridge window patch that fixed HP EliteDesk 805 G6, but broke ppc:sam460ex (Bjorn Helgaas)" * tag 'pci-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: Coalesce host bridge contiguous apertures"
-