- 27 Jan, 2017 18 commits
-
-
Jens Axboe authored
Use op_is_flush() where applicable. Signed-off-by:Jens Axboe <axboe@fb.com>
-
Jens Axboe authored
Instead of letting the caller check this and handle the details of inserting a flush request, put the logic in the scheduler insertion function. This fixes direct flush insertion outside of the usual make_request_fn calls, like from dm via blk_insert_cloned_request(). Signed-off-by: -
Christoph Hellwig authored
This centralizes the checks for bios that needs to be go into the flush state machine. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Jens Axboe authored
When we invoke dispatch_requests(), the scheduler empties everything into the passed in list. This isn't always a good thing, since it means that we remove items that we could have potentially merged with. Change the function to dispatch single requests at the time. If we do that, we can backoff exactly at the point where the device can't consume more IO, and leave the rest with the scheduler for better merging and future dispatch decision making. Signed-off-by:
Omar Sandoval <osandov@fb.com> Tested-by:
Hannes Reinecke <hare@suse.com>
-
Jens Axboe authored
If we have both multiple hardware queues and shared tag map between devices, we need to ensure that we propagate the hardware queue restart bit higher up. This is because we can get into a situation where we don't have any IO pending on a hardware queue, yet we fail getting a tag to start new IO. If that happens, it's not enough to mark the hardware queue as needing a restart, we need to bubble that up to the higher level queue as well. Signed-off-by:
-
Jens Axboe authored
We don't want to hold on to this resource when we have a scheduler attached. Signed-off-by:
-
Jens Axboe authored
Once we mark the queue as needing a restart, re-check if we can get a driver tag. This fixes a theoretical issue where the needed IO completes _after_ blk_mq_get_driver_tag() fails, but before we manage to set the restart bit. Signed-off-by:
-
Jens Axboe authored
We'll use the same criteria for whether we need to run the queue sync or async when we have a scheduler, as we do without one. Signed-off-by:
-
Omar Sandoval authored
These counters aren't as out-of-place in sysfs as the other stuff, but debugfs is a slightly better home for them. Reviewed-by:
-
Omar Sandoval authored
These statistics _might_ be useful to userspace, but it's better not to commit to an ABI for these yet. Also, the dispatched file in sysfs couldn't be cleared, so make it clearable like the others in debugfs. Reviewed-by:
-
Omar Sandoval authored
These can be used to debug issues like tag leaks and stuck requests. Reviewed-by:
-
Omar Sandoval authored
These are very tied to the blk-mq tag implementation, so exposing them to sysfs isn't a great idea. Move the debugging information to debugfs and add basic entries for the number of tags and the number of reserved tags to sysfs. Reviewed-by:
-
Omar Sandoval authored
This is useful for debugging problems where we've gotten stuck with requests in the software queues. Reviewed-by:
-
Omar Sandoval authored
This is useful debugging information that will be used in the blk-mq debugfs directory. Reviewed-by:
-
Omar Sandoval authored
The request pointers by themselves aren't super useful. Reviewed-by:
-
Omar Sandoval authored
These lists are only useful for debugging; they definitely don't belong in sysfs. Putting them in debugfs also removes the limitation of a single page of output. Reviewed-by:
-
Omar Sandoval authored
hctx->state could come in handy for bugs where the hardware queue gets stuck in the stopped state, and hctx->flags is just useful to know. Signed-off-by:
-
Omar Sandoval authored
In preparation for putting blk-mq debugging information in debugfs, create a directory tree mirroring the one in sysfs: # tree -d /sys/kernel/debug/block /sys/kernel/debug/block |-- nvme0n1 | `-- mq | |-- 0 | | `-- cpu0 | |-- 1 | | `-- cpu1 | |-- 2 | | `-- cpu2 | `-- 3 | `-- cpu3 `-- vda `-- mq `-- 0 |-- cpu0 |-- cpu1 |-- cpu2 `-- cpu3 Also add the scaffolding for the actual files that will go in here, either under the hardware queue or software queue directories. Reviewed-by:
-
- 26 Jan, 2017 2 commits
-
-
Jens Axboe authored
We don't trigger this from the normal IO path, since we always use blocking allocations from there. But Bart saw it testing multipath dm, since that is a heavy user of atomic request allocations in the map and clone path. Reported-by:
-
Jens Axboe authored
If we come in from blk_mq_alloc_requst() with NOWAIT set in flags, we must ensure that we don't later overwrite that in blk_mq_sched_get_request(). Initialize alloc_data->flags before passing it in. Reported-by:
-
- 25 Jan, 2017 1 commit
-
-
Jens Axboe authored
If we have a scheduler attached, we have two sets of tags. We don't want to apply our active queue throttling for the scheduler side of tags, that only applies to driver tags since that's the resource we need to dispatch an IO. Signed-off-by:
-
- 23 Jan, 2017 3 commits
-
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. ERROR: do not use assignment in if condition Thus fix the affected source code place. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. ERROR: do not use assignment in if condition Thus fix the affected source code places. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Alexander Potapenko authored
KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of uninitialized memory in cfq_init_cfqq(): ================================================================== BUG: KMSAN: use of unitialized memory ... Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff8202ac97>] dump_stack+0x157/0x1d0 lib/dump_stack.c:51 [<ffffffff813e9b65>] kmsan_report+0x205/0x360 ??:? [<ffffffff813eabbb>] __msan_warning+0x5b/0xb0 ??:? [< inline >] cfq_init_cfqq block/cfq-iosched.c:3754 [<ffffffff8201e110>] cfq_get_queue+0xc80/0x14d0 block/cfq-iosched.c:3857 ... origin: [<ffffffff8103ab37>] save_stack_trace+0x27/0x50 arch/x86/kernel/stacktrace.c:67 [<ffffffff813e836b>] kmsan_internal_poison_shadow+0xab/0x150 ??:? [<ffffffff813e88ab>] kmsan_poison_slab+0xbb/0x120 ??:? [< inline >] allocate_slab mm/slub.c:1627 [<ffffffff813e533f>] new_slab+0x3af/0x4b0 mm/slub.c:1641 [< inline >] new_slab_objects mm/slub.c:2407 [<ffffffff813e0ef3>] ___slab_alloc+0x323/0x4a0 mm/slub.c:2564 [< inline >] __slab_alloc mm/slub.c:2606 [< inline >] slab_alloc_node mm/slub.c:2669 [<ffffffff813dfb42>] kmem_cache_alloc_node+0x1d2/0x1f0 mm/slub.c:2746 [<ffffffff8201d90d>] cfq_get_queue+0x47d/0x14d0 block/cfq-iosched.c:3850 ... ================================================================== (the line numbers are relative to 4.8-rc6, but the bug persists upstream) The uninitialized struct cfq_queue is created by kmem_cache_alloc_node() and then passed to cfq_init_cfqq(), which accesses cfqq->ioprio_class before it's initialized. Signed-off-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
- 20 Jan, 2017 1 commit
-
-
Jens Axboe authored
Add support for growing the tags associated with a hardware queue, for the scheduler tags. Currently we only support resizing within the limits of the original depth, change that so we can grow it as well by allocating and replacing the existing scheduler tag set. This is similar to how we could increase the software queue depth with the legacy IO stack and schedulers. Signed-off-by:
-
- 19 Jan, 2017 3 commits
-
-
Jens Axboe authored
The run handler we register for the delayed work requires that the queue be stopped, yet we leave that up to the caller. Let's move it into blk_mq_delay_queue() itself, so that the API is sane. This fixes a stall with SCSI, where it calls blk_mq_delay_queue() without having stopped the queue. Hence the queue is never run. Reported-by:
-
Jens Axboe authored
We used to pass in NULL for hctx for reserved tags, but we don't do that anymore. Hence the check for whether hctx is NULL or not is now redundant, kill it. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: a642a158aec6 ("blk-mq-tag: cleanup the normal/reserved tag allocation") Signed-off-by:
-
Jens Axboe authored
We already checked that e is NULL, so no point in calling elevator_put() to free it. Reported-by:
-
- 18 Jan, 2017 4 commits
-
-
Jens Axboe authored
There's no potential harm in quiescing the queue, but it also doesn't buy us anything. And we can't run the queue async for policy deactivate, since we could be in the path of tearing the queue down. If we schedule an async run of the queue at that time, we're racing with queue teardown AFTER having we've already torn most of it down. Reported-by:
-
Omar Sandoval authored
When we resize a struct sbitmap_queue, we update the wakeup batch size, but we don't update the wait count in the struct sbq_wait_states. If we resized down from a size which could use a bigger batch size, these counts could be too large and cause us to miss necessary wakeups. To fix this, update the wait counts when we resize (ensuring some careful memory ordering so that it's safe w.r.t. concurrent clears). This also fixes a theoretical issue where two threads could end up bumping the wait count up by the batch size, which could also potentially lead to hangs. Reported-by:
Martin Raiber <martin@urbackup.org> Fixes: e3a2b3f9 ("blk-mq: allow changing of queue depth through sysfs") Fixes: 2971c35f ("blk-mq: bitmap tag: fix race on blk_mq_bitmap_tags::wake_cnt") Signed-off-by:
-
Omar Sandoval authored
We always do an atomic clear_bit() right before we call sbq_wake_up(), so we can use smp_mb__after_atomic(). While we're here, comment the memory barriers in here a little more. Signed-off-by:
-
Jens Axboe authored
If we call blk_mq_quiesce_queue() on a queue, we must remember to pair that with something that clears the stopped by on the queues later on. Signed-off-by:
-
- 17 Jan, 2017 8 commits
-
-
Jens Axboe authored
Add Kconfig entries to manage what devices get assigned an MQ scheduler, and add a blk-mq flag for drivers to opt out of scheduling. The latter is useful for admin type queues that still allocate a blk-mq queue and tag set, but aren't use for normal IO. Signed-off-by:
-
Jens Axboe authored
This is basically identical to deadline-iosched, except it registers as a MQ capable scheduler. This is still a single queue design. Signed-off-by:
-
Jens Axboe authored
This adds a set of hooks that intercepts the blk-mq path of allocating/inserting/issuing/completing requests, allowing us to develop a scheduler within that framework. We reuse the existing elevator scheduler API on the registration side, but augment that with the scheduler flagging support for the blk-mq interfce, and with a separate set of ops hooks for MQ devices. We split driver and scheduler tags, so we can run the scheduling independently of device queue depth. Signed-off-by:
-
Jens Axboe authored
This is in preparation for having two sets of tags available. For that we need a static index, and a dynamically assignable one. Signed-off-by:
-
Jens Axboe authored
No functional change in this patch, just in preparation for having two types of tags available to the block layer for a single request. Signed-off-by:
-
Jens Axboe authored
Prep patch for adding an extra tag map for scheduler requests. Signed-off-by:
-
Jens Axboe authored
This is in preparation for having another tag set available. Cleanup the parameters, and allow passing in of tags for blk_mq_put_tag(). Signed-off-by:
-
Jens Axboe authored
Signed-off-by:
-
