1. 31 Mar, 2023 14 commits
    • Stanislav Fomichev's avatar
      tools: ynl: ethtool testing tool · f3d07b02
      Stanislav Fomichev authored
      This is what I've been using to see whether the spec makes sense.
      A small subset of getters (mostly the unprivileged ones) is implemented.
      Some setters (channels) also work.
      Setters for messages with bitmasks are not implemented.
      
      Initially I was trying to make this tool look 1:1 like real ethtool,
      but eventually gave up :-)
      
      Sample output:
      
      $ ./tools/net/ynl/ethtool enp0s31f6
      Settings for enp0s31f6:
      Supported ports: [ TP ]
      Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half
      100baseT/Full 1000baseT/Full
      Supported pause frame use: no
      Supports auto-negotiation: yes
      Supported FEC modes: Not reported
      Speed: Unknown!
      Duplex: Unknown! (255)
      Auto-negotiation: on
      Port: Twisted Pair
      PHYAD: 2
      Transceiver: Internal
      MDI-X: Unknown (auto)
      Current message level: drv probe link
      Link detected: no
      Signed-off-by: default avatarStanislav Fomichev <sdf@google.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      f3d07b02
    • Stanislav Fomichev's avatar
      tools: ynl: replace print with NlError · 48993e22
      Stanislav Fomichev authored
      Instead of dumping the error on the stdout, make the callee and
      opportunity to decide what to do with it. This is mostly for the
      ethtool testing.
      Signed-off-by: default avatarStanislav Fomichev <sdf@google.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      48993e22
    • Stanislav Fomichev's avatar
      tools: ynl: populate most of the ethtool spec · a353318e
      Stanislav Fomichev authored
      Things that are not implemented:
      - cable tests
      - bitmaks in the requests don't work (needs multi-attr support in ynl.py)
      - stats-get seems to return nonsense (not passing a bitmask properly?)
      - notifications are not tested
      Signed-off-by: default avatarStanislav Fomichev <sdf@google.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      a353318e
    • Stanislav Fomichev's avatar
      tools: ynl: support byte-order in cli · 9f7cc57f
      Stanislav Fomichev authored
      Used by ethtool spec.
      Signed-off-by: default avatarStanislav Fomichev <sdf@google.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      9f7cc57f
    • Simon Horman's avatar
      octeontx2-af: update type of prof fields in nix_aw_enq_req · 709d0b88
      Simon Horman authored
      Update type of prof and prof_mask fields in nix_as_enq_req
      from u64 to struct nix_bandprof_s, which is 128 bits wide.
      
      This is to address warnings with compiling with gcc-12 W=1
      regarding string fortification.
      
      Although the union of which these fields are a member is 128bits
      wide, and thus writing a 128bit entity is safe, the compiler flags
      a problem as the field being written is only 64 bits wide.
      
        CC [M]  drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.o
      scripts/Makefile.build:252: ./drivers/net/ethernet/marvell/octeontx2/nic/Makefile: otx2_dcbnl.o is added to multiple modules: rvu_nicpf rvu_nicvf
        CC [M]  drivers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.o
        CC [M]  drivers/net/ethernet/marvell/octeontx2/nic/qos_sq.o
        CC [M]  drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.o
        CC [M]  drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.o
      In file included from ./include/linux/string.h:254,
                       from ./include/linux/bitmap.h:11,
                       from ./include/linux/cpumask.h:12,
                       from ./arch/x86/include/asm/paravirt.h:17,
                       from ./arch/x86/include/asm/cpuid.h:62,
                       from ./arch/x86/include/asm/processor.h:19,
                       from ./arch/x86/include/asm/timex.h:5,
                       from ./include/linux/timex.h:67,
                       from ./include/linux/time32.h:13,
                       from ./include/linux/time.h:60,
                       from ./include/linux/stat.h:19,
                       from ./include/linux/module.h:13,
                       from drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c:8:
      In function 'fortify_memcpy_chk',
          inlined from 'rvu_nix_blk_aq_enq_inst' at drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c:969:4:
      ./include/linux/fortify-string.h:529:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
        529 |                         __read_overflow2_field(q_size_field, size);
            |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      In function 'fortify_memcpy_chk',
          inlined from 'rvu_nix_blk_aq_enq_inst' at drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c:984:4:
      ./include/linux/fortify-string.h:529:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
        529 |                         __read_overflow2_field(q_size_field, size);
            |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      cc1: all warnings being treated as errors
      
      Compile tested only!
      Signed-off-by: default avatarSimon Horman <horms@kernel.org>
      Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
      Link: https://lore.kernel.org/r/20230329112356.458072-1-horms@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      709d0b88
    • Jakub Kicinski's avatar
      Merge branch 'net-sched-act_tunnel_key-add-support-for-tunnel_dont_fragment' · f76b9bba
      Jakub Kicinski authored
      Davide Caratti says:
      
      ====================
      net/sched: act_tunnel_key: add support for TUNNEL_DONT_FRAGMENT
      
      - patch 1 extends TC tunnel_key action to add support for TUNNEL_DONT_FRAGMENT
      - patch 2 extends tdc to skip tests when iproute2 support is missing
      - patch 3 adds a tdc test case to verify functionality of the control plane
      - patch 4 adds a net/forwarding test case to verify functionality of the data plane
      ====================
      
      Link: https://lore.kernel.org/r/cover.1680082990.git.dcaratti@redhat.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      f76b9bba
    • Davide Caratti's avatar
      selftests: forwarding: add tunnel_key "nofrag" test case · 533a89b1
      Davide Caratti authored
      Add a selftest that configures metadata tunnel encapsulation using the TC
      "tunnel_key" action: it includes a test case for setting "nofrag" flag.
      
      Example output:
      
       # selftests: net/forwarding: tc_tunnel_key.sh
       # TEST: tunnel_key nofrag (skip_hw)                                   [ OK ]
       # INFO: Could not test offloaded functionality
       ok 1 selftests: net/forwarding: tc_tunnel_key.sh
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      533a89b1
    • Davide Caratti's avatar
      selftests: tc-testing: add tunnel_key "nofrag" test case · b8617f8e
      Davide Caratti authored
      # ./tdc.py -e 6bda -l
       6bda: (actions, tunnel_key) Add tunnel_key action with nofrag option
      Acked-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      b8617f8e
    • Davide Caratti's avatar
      selftests: tc-testing: add "depends_on" property to skip tests · 7f3f8640
      Davide Caratti authored
      currently, users can skip individual test cases by means of writing
      
        "skip": "yes"
      
      in the scenario file. Extend this functionality, introducing 'dependsOn':
      it's optional property like "skip", but the value contains a command (for
      example, a probe on iproute2 to check if it supports a specific feature).
      If such property is present, tdc executes that command and skips the test
      when the return value is non-zero.
      Reviewed-by: default avatarPedro Tammela <pctammela@mojatatu.com>
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      7f3f8640
    • Davide Caratti's avatar
      net/sched: act_tunnel_key: add support for "don't fragment" · 2384127e
      Davide Caratti authored
      extend "act_tunnel_key" to allow specifying TUNNEL_DONT_FRAGMENT.
      Suggested-by: default avatarIlya Maximets <i.maximets@ovn.org>
      Reviewed-by: default avatarPedro Tammela <pctammela@mojatatu.com>
      Acked-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2384127e
    • Petr Machata's avatar
      selftests: rtnetlink: Fix do_test_address_proto() · 46e9acb7
      Petr Machata authored
      This selftest was introduced recently in the commit cited below. It misses
      several check_err() invocations to actually verify that the previous
      command succeeded. When these are added, the first one fails, because
      besides the addresses added by hand, there can be a link-local address
      added by the kernel. Adjust the check to expect at least three addresses
      instead of exactly three, and add the missing check_err's.
      
      Furthermore, the explanatory comments assume that the address with no
      protocol is $addr2, when in fact it is $addr3. Update the comments.
      
      Fixes: 6a414fd7 ("selftests: rtnetlink: Add an address proto test")
      Signed-off-by: default avatarPetr Machata <petrm@nvidia.com>
      Reviewed-by: default avatarIdo Schimmel <idosch@nvidia.com>
      Link: https://lore.kernel.org/r/53a579bc883e1bf2fe490d58427cf22c2d1aa21f.1680102695.git.petrm@nvidia.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      46e9acb7
    • Nathan Chancellor's avatar
      net: ethernet: ti: Fix format specifier in netcp_create_interface() · 3292004c
      Nathan Chancellor authored
      After commit 3948b059 ("net: introduce a config option to tweak
      MAX_SKB_FRAGS"), clang warns:
      
        drivers/net/ethernet/ti/netcp_core.c:2085:4: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
                                MAX_SKB_FRAGS);
                                ^~~~~~~~~~~~~
        include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
                dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
                                                                       ~~~     ^~~~~~~~~~~
        include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
                        _p_func(dev, fmt, ##__VA_ARGS__);                       \
                                     ~~~    ^~~~~~~~~~~
        include/linux/skbuff.h:352:23: note: expanded from macro 'MAX_SKB_FRAGS'
        #define MAX_SKB_FRAGS CONFIG_MAX_SKB_FRAGS
                              ^~~~~~~~~~~~~~~~~~~~
        ./include/generated/autoconf.h:11789:30: note: expanded from macro 'CONFIG_MAX_SKB_FRAGS'
        #define CONFIG_MAX_SKB_FRAGS 17
                                     ^~
        1 warning generated.
      
      Follow the pattern of the rest of the tree by changing the specifier to
      '%u' and casting MAX_SKB_FRAGS explicitly to 'unsigned int', which
      eliminates the warning.
      
      Fixes: 3948b059 ("net: introduce a config option to tweak MAX_SKB_FRAGS")
      Signed-off-by: default avatarNathan Chancellor <nathan@kernel.org>
      Reviewed-by: default avatarNick Desaulniers <ndesaulniers@google.com>
      Link: https://lore.kernel.org/r/20230329-net-ethernet-ti-wformat-v1-1-83d0f799b553@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      3292004c
    • Vladimir Oltean's avatar
      net: dsa: fix db type confusion in host fdb/mdb add/del · eb1ab765
      Vladimir Oltean authored
      We have the following code paths:
      
      Host FDB (unicast RX filtering):
      
      dsa_port_standalone_host_fdb_add()   dsa_port_bridge_host_fdb_add()
                     |                                     |
                     +--------------+         +------------+
                                    |         |
                                    v         v
                               dsa_port_host_fdb_add()
      
      dsa_port_standalone_host_fdb_del()   dsa_port_bridge_host_fdb_del()
                     |                                     |
                     +--------------+         +------------+
                                    |         |
                                    v         v
                               dsa_port_host_fdb_del()
      
      Host MDB (multicast RX filtering):
      
      dsa_port_standalone_host_mdb_add()   dsa_port_bridge_host_mdb_add()
                     |                                     |
                     +--------------+         +------------+
                                    |         |
                                    v         v
                               dsa_port_host_mdb_add()
      
      dsa_port_standalone_host_mdb_del()   dsa_port_bridge_host_mdb_del()
                     |                                     |
                     +--------------+         +------------+
                                    |         |
                                    v         v
                               dsa_port_host_mdb_del()
      
      The logic added by commit 5e8a1e03 ("net: dsa: install secondary
      unicast and multicast addresses as host FDB/MDB") zeroes out
      db.bridge.num if the switch doesn't support ds->fdb_isolation
      (the majority doesn't). This is done for a reason explained in commit
      c2693363 ("net: dsa: request drivers to perform FDB isolation").
      
      Taking a single code path as example - dsa_port_host_fdb_add() - the
      others are similar - the problem is that this function handles:
      - DSA_DB_PORT databases, when called from
        dsa_port_standalone_host_fdb_add()
      - DSA_DB_BRIDGE databases, when called from
        dsa_port_bridge_host_fdb_add()
      
      So, if dsa_port_host_fdb_add() were to make any change on the
      "bridge.num" attribute of the database, this would only be correct for a
      DSA_DB_BRIDGE, and a type confusion for a DSA_DB_PORT bridge.
      
      However, this bug is without consequences, for 2 reasons:
      
      - dsa_port_standalone_host_fdb_add() is only called from code which is
        (in)directly guarded by dsa_switch_supports_uc_filtering(ds), and that
        function only returns true if ds->fdb_isolation is set. So, the code
        only executed for DSA_DB_BRIDGE databases.
      
      - Even if the code was not dead for DSA_DB_PORT, we have the following
        memory layout:
      
      struct dsa_bridge {
      	struct net_device *dev;
      	unsigned int num;
      	bool tx_fwd_offload;
      	refcount_t refcount;
      };
      
      struct dsa_db {
      	enum dsa_db_type type;
      
      	union {
      		const struct dsa_port *dp; // DSA_DB_PORT
      		struct dsa_lag lag;
      		struct dsa_bridge bridge; // DSA_DB_BRIDGE
      	};
      };
      
      So, the zeroization of dsa_db :: bridge :: num on a dsa_db structure of
      type DSA_DB_PORT would access memory which is unused, because we only
      use dsa_db :: dp for DSA_DB_PORT, and this is mapped at the same address
      with dsa_db :: dev for DSA_DB_BRIDGE, thanks to the union definition.
      
      It is correct to fix up dsa_db :: bridge :: num only from code paths
      that come from the bridge / switchdev, so move these there.
      Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
      Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Link: https://lore.kernel.org/r/20230329133819.697642-1-vladimir.oltean@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      eb1ab765
    • Tom Rix's avatar
      net: ksz884x: remove unused change variable · 9a865a98
      Tom Rix authored
      clang with W=1 reports
      drivers/net/ethernet/micrel/ksz884x.c:3216:6: error: variable
        'change' set but not used [-Werror,-Wunused-but-set-variable]
              int change = 0;
                  ^
      This variable is not used so remove it.
      Signed-off-by: default avatarTom Rix <trix@redhat.com>
      Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
      Link: https://lore.kernel.org/r/20230329125929.1808420-1-trix@redhat.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      9a865a98
  2. 30 Mar, 2023 26 commits