- 03 Feb, 2009 3 commits
-
-
Arjan van de Ven authored
The SSS flag, which directs the OS to spin up one disk at a time to not have the PSU blow out, sometimes gets set even when not needed. The effect of this is a longer-than-needed boot time. This patch adds a module parameter that makes the driver ignore SSS at least as far as the parallel scan during boot is concerned... Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Mark Lord authored
Fix chip type for the Highpoint RocketRAID 1740 and 1742 PCI cards. These really do have Marvell 6042 chips on them, rather than the 5081 chip. Confirmed by multiple (two) users (for the 1740), and by examining the product photographs from Highpoint's web site. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Pasi Kärkkäinen authored
I tried compiling 2.6.29-rc1 and 2.6.29-rc3 with libata debugging enabled and got the following error: CC [M] drivers/ata/sata_sil.o drivers/ata/sata_sil.c: In function 'sil_fill_sg': drivers/ata/sata_sil.c:327: error: 'pi' undeclared (first use in this function) drivers/ata/sata_sil.c:327: error: (Each undeclared identifier is reported only once drivers/ata/sata_sil.c:327: error: for each function it appears in.) make[2]: *** [drivers/ata/sata_sil.o] Error 1 make[1]: *** [drivers/ata] Error 2 make: *** [drivers] Error 2 include/linux/libata.h has the following enabled: #define ATA_DEBUG #define ATA_VERBOSE_DEBUG #define ATA_IRQ_TRAP This fixes the compilation. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
- 01 Feb, 2009 1 commit
-
-
Linus Torvalds authored
This essentially reverts commit 8edb08ca. It downgraded our mmap semaphore to a read-lock while mlocking pages, in order to allow other threads (and external accesses like "ps" et al) to walk the vma lists and take page faults etc. Which is a nice idea, but the implementation does not work. Because we cannot upgrade the lock back to a write lock without releasing the mmap semaphore, the code had to release the lock entirely and then re-take it as a writelock. However, that meant that the caller possibly lost the vma chain that it was following, since now another thread could come in and mmap/munmap the range. The code tried to work around that by just looking up the vma again and erroring out if that happened, but quite frankly, that was just a buggy hack that doesn't actually protect against anything (the other thread could just have replaced the vma with another one instead of totally unmapping it). The only way to downgrade to a read map _reliably_ is to do it at the end, which is likely the right thing to do: do all the 'vma' operations with the write-lock held, then downgrade to a read after completing them all, and then do the "populate the newly mlocked regions" while holding just the read lock. And then just drop the read-lock and return to user space. The (perhaps somewhat simpler) alternative is to just make all the callers of mlock_vma_pages_range() know that the mmap lock got dropped, and just re-grab the mmap semaphore if it needs to mlock more than one vma region. So we can do this "downgrade mmap sem while populating mlocked regions" thing right, but the way it was done here was absolutely not correct. Thus the revert, in the expectation that we will do it all correctly some day. Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 31 Jan, 2009 15 commits
-
-
Linus Torvalds authored
Merge branch 'header-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'header-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (90 commits) headers_check fix: x86, swab.h headers_check fix: x86, sigcontext32.h headers_check fix: x86, sigcontext.h headers_check fix: x86, ptrace-abi.h headers_check fix: x86, mtrr.h headers_check fix: x86, mce.h headers_check fix: x86, kvm.h headers_check fix: x86, e820.h headers_check fix: linux/rtnetlink.h headers_check fix: linux/nubus.h headers_check fix: video/uvesafb.h headers_check fix: video/sisfb.h headers_check fix: sound/hdsp.h headers_check fix: mtd/inftl-user.h headers_check fix: linux/virtio_net.h headers_check fix: linux/virtio_console.h headers_check fix: linux/virtio_blk.h headers_check fix: linux/videodev.h headers_check fix: linux/video_encoder.h headers_check fix: linux/video_decoder.h ...
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: generic-ipi: use per cpu data for single cpu ipi calls cpumask: convert lib/smp_processor_id to new cpumask ops signals, debug: fix BUG: using smp_processor_id() in preemptible code in print_fatal_signal()
-
Linus Torvalds authored
Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: export __set_irq_handler() and handle_level_irq()
-
Linus Torvalds authored
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hrtimer: prevent negative expiry value after clock_was_set() hrtimers: allow the hot-unplugging of all cpus hrtimers: increase clock min delta threshold while interrupt hanging
-
Linus Torvalds authored
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, ds, bts: cleanup/fix DS configuration ring-buffer: reset timestamps when ring buffer is reset trace: set max latency variable to zero on default trace: stop all recording to ring buffer on ftrace_dump trace: print ftrace_dump at KERN_EMERG log level ring_buffer: reset write when reserve buffer fail tracing/function-graph-tracer: fix a regression while suspend to disk ring-buffer: fix alignment problem
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 setup: fix asm constraints in vesa_store_edid xen: make sysfs files behave as their names suggest x86: tone down mtrr_trim_uncached_memory() warning x86: correct the CPUID pattern for MSR_IA32_MISC_ENABLE availability
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: leds: Fix bounds checking of wm8350->pmic.led regulator: move bq24022 init back to module_init instead of subsys_initcall
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (27 commits) MIPS: Alchemy: time.c build fix MIPS: RB532: Export rb532_gpio_set_func() MIPS: RB532: Update headers MIPS: RB532: Simplify dev3 init MIPS: RB532: Remove {get,set}_434_reg() MIPS: RB532: Move dev3 init code to devices.c MIPS: RB532: Fix set_latch_u5() MIPS: RB532: Fix init of rb532_dev3_ctl_res MIPS: RB532: Use driver_data instead of platform_data MIPS: RB532: Detect uart type, add platform device MIPS: RB532: remove useless CF GPIO initialisation MIPS: RB532: Auto disable GPIO alternate function MIPS: RB532: Add set_type() function to IRQ struct. MIPS: RC32434: Define io_map_base for PCI controller MIPS: RB532: Fix bit swapping in rb532_set_bit() MIPS: Use hardware watchpoints on all R1 and R2 CPUs. MIPS: Read watch registers with interrupts disabled. MIPS: Fix a typo in watchpoint register structure. MIPS: TXx9: Add support for TX4939 internal RTC MIPS: R2: Fix broken installation of cache error handler. ...
-
Mikulas Patocka authored
Fix an off-by-two memory error in console selection. The loop below goes from sel_start to sel_end (inclusive), so it writes one more character. This one more character was added to the allocated size (+1), but it was not multiplied by an UTF-8 multiplier. This patch fixes a memory corruption when UTF-8 console is used and the user selects a few characters, all of them 3-byte in UTF-8 (for example a frame line). When memory redzones are enabled, a redzone corruption is reported. When they are not enabled, trashing of random memory occurs. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: igb: fix link reporting when using sgmii igb: prevent skb_over panic w/ mtu smaller than 1K igb: Fix DCA errors and do not use context index for 82576 ipv6: compile fix for ip6mr.c packet: Avoid lock_sock in mmap handler sfc: Replace stats_enabled flag with a disable count sfc: SFX7101/SFT9001: Fix AN advertisements sfc: SFT9001: Always enable XNP exchange on SFT9001 rev B sfc: Update board info for hardware monitor on SFN4111T-R5 and later sfc: Test for PHYXS faults whenever we cannot test link state bits sfc: Reinitialise the PHY completely in case of a PHY or NIC reset sfc: Fix post-reset MAC selection sfc: SFN4111T: Fix GPIO sharing between I2C and FLASH_CFG_1 sfc: SFT9001: Fix speed reporting in 1G PHY loopback sfc: SFX7101: Remove workaround for bad link training sfc: SFT9001: Enable robust link training sky2: fix hard hang with netconsoling and iface going up
-
Linus Torvalds authored
The mmap_region() code would temporarily set the VM_ACCOUNT flag for anonymous shared mappings just to inform shmem_zero_setup() that it should enable accounting for the resulting shm object. It would then clear the flag after calling ->mmap (for the /dev/zero case) or doing shmem_zero_setup() (for the MAP_ANON case). This just resulted in vma merge issues, but also made for just unnecessary confusion. Use the already-existing VM_NORESERVE flag for this instead, and let shmem_{zero|file}_setup() just figure it out from that. This also happens to make it obvious that the new DRI2 GEM layer uses a non-reserving backing store for its object allocation - which is quite possibly not intentional. But since I didn't want to change semantics in this patch, I left it alone, and just updated the caller to use the new flag semantics. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Duyck authored
When using sgmii the link was not being properly passed up to the driver from the underlying link management functions. This change corrects it so that get_link_status is cleared when a link has been found. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
A panic has been observed with frame sizes smaller than 1K. This has been root caused to the hardware spanning larger frames across multiple buffers and then reporting the original frame size in the first descriptor. To prevent this we can enable set the LPE bit which in turn will restrict packet sizes to those set in the RLPML register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
82576 was being incorrectly flagged as needing a context index. It does not as each ring has it's own table of 2 contexts. Driver was registering after registering the driver instead of the other way around. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dave Jones authored
net/ipv6/ip6mr.c: In function 'pim6_rcv': net/ipv6/ip6mr.c:368: error: implicit declaration of function 'csum_ipv6_magic' Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Jan, 2009 21 commits
-
-
Andreas Schwab authored
Impact: fix potential miscompile (currently believed non-manifest) As the comment explains, the VBE DDC call can clobber any register. Tell the compiler about that fact. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Herbert Xu authored
As the mmap handler gets called under mmap_sem, and we may grab mmap_sem elsewhere under the socket lock to access user data, we should avoid grabbing the socket lock in the mmap handler. Since the only thing we care about in the mmap handler is for pg_vec* to be invariant, i.e., to exclude packet_set_ring, we can achieve this by simply using a new mutex. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Martin MOKREJŠ <mmokrejs@ribosome.natur.cuni.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Currently we use a spin-lock to serialise statistics fetches and also to inhibit them for short periods of time, plus a flag to enable/disable statistics fetches for longer periods of time, during online reset. This was apparently insufficient to deal with the several reasons for stats being disabled. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
All 10Xpress PHYs require autonegotiation all the time; enforce this in the set_settings() method and do not treat it as a workaround. Remove claimed support for 100M HD mode since it is not supported by current firmware. Do not set speed override bits when AN is enabled, and do not use register 1.49192 for AN configuration as it can override what we set elsewhere. Always set the AN selector bits to 1 (802.3). Fix confusion between Next Page and Extended Next Page. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
This workaround is not specific to rev A. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steve Hodgson authored
Depending on the loopback mode, there may be no pertinent link state bits. In this case we test the PHYXS RX fault bit instead. Make sure to do this in all cases where there are no link state bits. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steve Hodgson authored
In particular, set pause advertising bits properly. A PHY reset is not necessary to recover from the register self-test, so use a "invisible" reset there instead. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steve Hodgson authored
Modify falcon_switch_mac() to always set NIC_STAT_REG, even if the the MAC is the same as it was before. This ensures that the value is correct after an online reset. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Change sfn4111t_reset() to change only GPIO output enables so that it doesn't break subsequent I2C operations. Update comments to explain exactly what we're doing. Add a short sleep to make sure the FLASH_CFG_1 value is latched before any subsequent I2C operations. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steve Hodgson authored
Instead of disabling AN in loopback, just prevent restarting AN and override the speed in sft9001_get_settings(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steve Hodgson authored
Early versions of the SFX7101 firmware could complete link training in a state where it would not adequately cancel noise (Solarflare bug 10750). We previously worked around this by resetting the PHY after seeing many Ethernet CRC errors. This workaround is unsafe since it takes no account of the interval between errors; it also appears to be unnecessary with production firmware. Therefore remove it. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steve Hodgson authored
Enable a firmware option that appears to be necessary for reliable operation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
Printing anything over netconsole before hw is up and running is, of course, not going to work. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roel Kluin authored
Fix bounds checking of wm8350->pmic.led Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Philipp Zabel authored
This workaround was needed when regulator/ was not linked before both power/ and usb/otg/ in drivers/Makefile. Now that it is even linked before mfd/, this patch makes sure that bq24022 isn't probed before the GPIO expander is set up. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Thomas Gleixner authored
Impact: prevent false positive WARN_ON() in clockevents_program_event() clock_was_set() changes the base->offset of CLOCK_REALTIME and enforces the reprogramming of the clockevent device to expire timers which are based on CLOCK_REALTIME. If the clock change is large enough then the subtraction of the timer expiry value and base->offset can become negative which triggers the warning in clockevents_program_event(). Check the subtraction result and set a negative value to 0. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Sebastien Dugue authored
Impact: fix CPU hotplug hang on Power6 testbox On architectures that support offlining all cpus (at least powerpc/pseries), hot-unpluging the tick_do_timer_cpu can result in a system hang. This comes from the fact that if the cpu going down happens to be the cpu doing the tick, then as the tick_do_timer_cpu handover happens after the cpu is dead (via the CPU_DEAD notification), we're left without ticks, jiffies are frozen and any task relying on timers (msleep, ...) is stuck. That's particularly the case for the cpu looping in __cpu_die() waiting for the dying cpu to be dead. This patch addresses this by having the tick_do_timer_cpu handover happen earlier during the CPU_DYING notification. For this, a new clockevent notification type is introduced (CLOCK_EVT_NOTIFY_CPU_DYING) which is triggered in hrtimer_cpu_notify(). Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Frederic Weisbecker authored
Impact: avoid timer IRQ hanging slow systems While using the function graph tracer on a virtualized system, the hrtimer_interrupt can hang the system on an infinite loop. This can be caused in several situations: - the hardware is very slow and HZ is set too high - something intrusive is slowing the system down (tracing under emulation) ... and the next clock events to program are always before the current time. This patch implements a reasonable compromise: if such a situation is detected, we share the CPUs time in 1/4 to process the hrtimer interrupts. This is enough to let the system running without serious starvation. It has been successfully tested under VirtualBox with 1000 HZ and 100 HZ with function graph tracer launched. On both cases, the clock events were increased until about 25 ms periodic ticks, which means 40 HZ. So we change a hard to debug hang into a warning message and a system that still manages to limp along. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Manuel Lauss authored
In Linus' current -git the cpumask member is now a pointer. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Phil Sutter authored
This kernel symbol provides a way for drivers to switch on alternate function for a certain GPIO pin. Turning it off is done implicitly when changing the GPIO direction, as that would be fixed when using the given pin als alternate function. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-