- 19 Feb, 2019 17 commits
-
-
Giridhar Malavali authored
This patch fixes warning seen when BLK-MQ is enabled and hardware does not support MQ. This will result into driver requesting MSIx vectors which are equal or less than pre_desc via PCI IRQ Affinity infrastructure. [ 19.746300] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.12-k. [ 19.746599] qla2xxx [0000:02:00.0]-001d: : Found an ISP2432 irq 18 iobase 0x(____ptrval____). [ 20.203186] ------------[ cut here ]------------ [ 20.203306] WARNING: CPU: 8 PID: 268 at drivers/pci/msi.c:1273 pci_irq_get_affinity+0xf4/0x120 [ 20.203481] Modules linked in: tg3 ptp qla2xxx(+) pps_core sg libphy scsi_transport_fc flash loop autofs4 [ 20.203700] CPU: 8 PID: 268 Comm: systemd-udevd Not tainted 5.0.0-rc5-00358-gdf3865f8 #113 [ 20.203830] Call Trace: [ 20.203933] [0000000000461bb0] __warn+0xb0/0xe0 [ 20.204090] [00000000006c8f34] pci_irq_get_affinity+0xf4/0x120 [ 20.204219] [000000000068c764] blk_mq_pci_map_queues+0x24/0x120 [ 20.204396] [00000000007162f4] scsi_map_queues+0x14/0x40 [ 20.204626] [0000000000673654] blk_mq_update_queue_map+0x94/0xe0 [ 20.204698] [0000000000676ce0] blk_mq_alloc_tag_set+0x120/0x300 [ 20.204869] [000000000071077c] scsi_add_host_with_dma+0x7c/0x300 [ 20.205419] [00000000100ead54] qla2x00_probe_one+0x19d4/0x2640 [qla2xxx] [ 20.205621] [00000000006b3c88] pci_device_probe+0xc8/0x160 [ 20.205697] [0000000000701c0c] really_probe+0x1ac/0x2e0 [ 20.205770] [0000000000701f90] driver_probe_device+0x50/0x100 [ 20.205843] [0000000000702134] __driver_attach+0xf4/0x120 [ 20.205913] [0000000000700644] bus_for_each_dev+0x44/0x80 [ 20.206081] [0000000000700c98] bus_add_driver+0x198/0x220 [ 20.206300] [0000000000702950] driver_register+0x70/0x120 [ 20.206582] [0000000010248224] qla2x00_module_init+0x224/0x284 [qla2xxx] [ 20.206857] ---[ end trace b1de7a3f79fab2c2 ]--- The fix is to check if the hardware does not have Multi Queue capabiltiy, use pci_alloc_irq_vectors() call instead of pci_alloc_irq_affinity(). Fixes: f664a3cc ("scsi: kill off the legacy IO path") Cc: stable@vger.kernel.org #4.19 Signed-off-by:Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Himanshu Madhani authored
Signed-off-by:
-
Joe Carnuccio authored
This patch adds new firmware dump template entries for ISP27XX firmware dump. Signed-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
-
Himanshu Madhani authored
This patch fixes following checkpatch ERROR ERROR: space prohibited before that ',' (ctx:WxW) No change is functionality due to this patch. Signed-off-by:
-
Quinn Tran authored
Current code hard codes marker request to use request and response queue 0. This patch make use of the qpair as the path to access the request/response queues. It allows marker to be place on any hardware queue. Signed-off-by:
Quinn Tran <qtran@marvell.com> Signed-off-by:
-
Quinn Tran authored
Prevent user from sending commands through sysfs while FW is not running or reset is in progress. Signed-off-by:
-
Anil Gurumurthy authored
This patch adds sysfs node 1. There is a new sysfs node port_speed 2. The possible values are 2(Auto neg), 8, 16, 32 3. A value outside of the above defaults to Auto neg 4. Any update to the setting causes a link toggle 5. This feature is currently only for ISP27xx Signed-off-by:
Anil Gurumurthy <agurumurthy@marvell.com> Signed-off-by:
-
Quinn Tran authored
Add check to allow 1 discovery command per session to be sent. Signed-off-by:
-
Himanshu Madhani authored
For FC-NVMe, if the fw_started flag is not set or fcport is deleted, then do not send Abort command Signed-off-by:
-
Himanshu Madhani authored
This patch fixes driver unload issue when FC-NVMe devices are configured. Signed-off-by:
-
Darren Trapp authored
Add Support for First Burst for FC-NVMe protocol. This feature requires First Burst support in the firmware. Signed-off-by:
Darren Trapp <darren.trapp@cavium.com> Signed-off-by:
-
Himanshu Madhani authored
This patch fixes LUN discovery when loop ID is not yet assigned by the firmware during driver load/sg_reset operations. Driver will now search for new loop id before retrying login. Fixes: 48acad09 ("scsi: qla2xxx: Fix N2N link re-connect") Cc: stable@vger.kernel.org #4.19 Signed-off-by:
-
Colin Ian King authored
The null check on pointer sess and the subsequent call is redundant as sess is null on all the the paths that lead to the out_term2 label. Hence the null check and the call can be removed. Also remove the redundant setting of sess to NULL as this is not required now. Detected by CoverityScan, CID#1420663 ("Logically dead code") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
-
Bill Kuzeja authored
When sending an srb with qla2x00_start_sp, the sp can complete and be freed by the time we log the debug message saying we sent it. This can cause a panic if sp gets reused quickly or when running a kernel that poisons freed memory. This was partially fixed by (not every case was addressed): Commit 9fe278f4 ("scsi: qla2xxx: Move log messages before issuing command to firmware") Signed-off-by:
Bill Kuzeja <william.kuzeja@stratus.com> Acked-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_cpu_affinity_check': drivers/scsi/lpfc/lpfc_init.c:10599:19: warning: variable 'phys_id' set but not used [-Wunused-but-set-variable] It never used since introduction in commit 6a828b0f ("scsi: lpfc: Support non-uniform allocation of MSIX vectors to hardware queues") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Manivannan Sadhasivam authored
Add HI3670 SoC UFS driver support by extending the common ufs-hisi driver. One major difference between HI3660 ad HI3670 SoCs interms of UFS is the PHY. HI3670 has a 10nm variant PHY and hence this parameter is used to distinguish the configuration. Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by:
Wei Li <liwei213@huawei.com> Signed-off-by:
-
Manivannan Sadhasivam authored
Add devicetree binding for HI3670 UFS controller. HI3760 SoC is very similar to HI3660 SoC with almost same IPs. Only major difference in terms of UFS is the PHY. HI3670 has 10nm PHY. But since the original driver (HI3660 UFS) cannot make HI3670 UFS functional, a separate compatible is added for HI3670 without any fallback. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
- 14 Feb, 2019 2 commits
-
-
Colin Ian King authored
There are a handful of statements that are indented incorrectly. Fix these. Signed-off-by:
-
Rob Herring authored
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. As prom_name is not used for anything else, remove it. Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
- 13 Feb, 2019 5 commits
-
-
Dietmar Hahn authored
Commit b2bff6ce ("[SCSI] sd: Quiesce mode sense error messages") added the macro sd_first_printk(). The macro takes "sdsk" as argument but dereferences "sdkp". This hasn't caused any real issues since all callers of sd_first_printk() have an sdkp. But fix the typo. [mkp: Turned this into a real patch and tweaked commit description] Signed-off-by:
Dietmar Hahn <dietmar.hahn@ts.fujitsu.com> Signed-off-by:
-
Shivasharan S authored
Signed-off-by:
Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by:
-
Shivasharan S authored
Add padding to make the structure variables in MR_HOST_DEVICE_LIST_ENTRY 64-bit aligned. Also, add reserved fields to MR_HOST_DEVICE_LIST for future firmware usage. Signed-off-by:
-
Dan Carpenter authored
This should return -ENOMEM if kcalloc() fails, but it accidentally returns success instead. Fixes: 6a828b0f ("scsi: lpfc: Support non-uniform allocation of MSIX vectors to hardware queues") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Chengguang Xu authored
poitner -> pointer. Signed-off-by:
Chengguang Xu <cgxu519@gmx.com> Reviewed-by:
Pedro Sousa <pedrom.sousa@synopsys.com> Signed-off-by:
-
- 12 Feb, 2019 7 commits
-
-
Martin K. Petersen authored
Teach scsi_debug to honor SWP in the Control Mode Page and report the resulting WP state in the Device-Specific Parameter field. In check_device_access_params() verify that commands that will write the medium are permitted to do so. Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com>
-
Bart Van Assche authored
This patch does not change any functionality but reduces the size of struct scsi_cmnd. Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Bart Van Assche authored
Since commit 26e85fcd ("[SCSI] sd: Permit merged discard requests"; kernel v3.10) sd_done() sets the residual not only for failed special requests but also for special requests that succeeded. Hence remove the code from functions called by sd_init_command() that sets the residual. This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality. Cc: Oliver Neukum <oneukum@suse.com> Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reviewed-by:
-
Bart Van Assche authored
This patch does not change any functionality. Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality. Cc: Lee Duncan <lduncan@suse.com> Cc: Chris Leech <cleech@redhat.com> Signed-off-by:
-
Bart Van Assche authored
A recent commit removed an element from opcode_info_arr[] but did not modify opcode_ind_arr[] nor was SDEB_I_XDWRITEREAD removed. Remove SDEB_I_XDWRITEREAD and bring the two arrays again in sync. This patch avoids that the following is reported: BUG: KASAN: null-ptr-deref in scsi_debug_queuecommand+0x60f/0xc90 [scsi_debug] Read of size 1 at addr 0000000000000001 by task iscsi-test-cu/683 CPU: 3 PID: 683 Comm: iscsi-test-cu Not tainted 5.0.0-rc5-dbg+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x86/0xca kasan_report.cold.3+0x5/0x3e __asan_load1+0x47/0x50 scsi_debug_queuecommand+0x60f/0xc90 [scsi_debug] scsi_queue_rq+0xc17/0x12e0 blk_mq_dispatch_rq_list+0x5fc/0xb10 blk_mq_sched_dispatch_requests+0x2f7/0x300 __blk_mq_run_hw_queue+0xd6/0x180 __blk_mq_delay_run_hw_queue+0x25c/0x290 blk_mq_run_hw_queue+0x119/0x1b0 blk_mq_sched_insert_request+0x274/0x350 blk_execute_rq_nowait+0x78/0x90 blk_execute_rq+0xcc/0x140 sg_io+0x30f/0x700 scsi_cmd_ioctl+0x4d4/0x540 scsi_cmd_blk_ioctl+0x7b/0x8b sd_ioctl+0xba/0x150 blkdev_ioctl+0x6e1/0xea0 block_ioctl+0x79/0x90 do_vfs_ioctl+0x12b/0x9b0 ksys_ioctl+0x41/0x80 __x64_sys_ioctl+0x43/0x50 do_syscall_64+0x71/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cc: Christoph Hellwig <hch@lst.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Fixes: ae3d56d8 ("scsi: remove bidirectional command support") Signed-off-by:
-
- 08 Feb, 2019 8 commits
-
-
John Garry authored
Do some very minor tidy-up, for things like needlessly initing variable and not leaving whitespace before quote endings. Originally-from: Xiang Chen <chenxiang66@hisilicon.com> Originally-from: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Xiang Chen authored
For auto-control irq affinity mode, choose the dq to deliver IO according to the current CPU. Then it decreases the performance regression that fio and CQ interrupts are processed on different node. For user control irq affinity mode, keep it as before. To realize it, also need to distinguish the usage of dq lock and sas_dev lock. We mark as experimental due to ongoing discussion on managed MSI IRQ during hotplug: https://marc.info/?l=linux-scsi&m=154876335707751&w=2 We're almost at the point where we can expose multiple queues to the upper layer for SCSI MQ, but we need to sort out the per-HBA tags performance issue. Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
-
John Garry authored
To support queue mapped to a CPU, it needs to be ensured that issuing an internal abort is safe, in that it is guaranteed that an internal abort is processed for a single IO or a device after all the relevant command(s) which it is attempting to abort have been processed by the controller. Currently we only deliver commands for any device on a single queue to solve this problem, as we know that commands issued on the same queue will be processed in order, and we will not have a scenario where the internal abort is racing against a command(s) which it is trying to abort. To enqueue commands on queue mapped to a CPU, choosing a queue for an command is based on the associated queue for the current CPU, so this is not safe for internal abort since it would definitely not be guaranteed that commands for the command devices are issued on the same queue. To solve this issue, we take a bludgeoning approach, and issue a separate internal abort on any queue(s) relevant to the command or device, in that we will be guaranteed that at least one of these internal aborts will be received last in the controller. So, for aborting a single command, we can just force the internal abort to be issued on the same queue as the command which we are trying to abort. For aborting all commands associated with a device, we issue a separate internal abort on all relevant queues. Issuing multiple internal aborts in this fashion would have not side affect. Signed-off-by:
-
Xiang Chen authored
If sending IOs to many disks from single queue, it is possible that the queue may be full. To avoid the situation, change queue depth from 512 to 4096 which is the max number of IOs for v3 hw. Signed-off-by:
-
Luo Jiaxing authored
Add an interface to manually trigger a debugfs dump. Signed-off-by:
Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by:
-
Xiang Chen authored
This patch adds support for DIX to v3 hw driver. For this, we build upon support for DIF, most significantly is adding new DMA map and unmap paths. Some pre-existing macro precedence issues are also tidied. They were detected by checkpatch --strict. Signed-off-by:
-
Douglas Anderson authored
If you look at the bindings for the UFS Host Controller it says: - compatible: must contain "jedec,ufs-1.1" or "jedec,ufs-2.0", may also list one or more of the following: "qcom,msm8994-ufshc" "qcom,msm8996-ufshc" "qcom,ufshc" My reading of that is that it's fine to just have either of these: 1. "qcom,msm8996-ufshc", "jedec,ufs-2.0" 2. "qcom,ufshc", "jedec,ufs-2.0" As far as I can tell neither of the above is actually a good idea. For #1 it turns out that the driver currently only keys off the compatible string "qcom,ufshc" so it won't actually probe. For #2 the driver won't probe but it's not a good idea to keep the SoC name out of the compatible string. Let's update the compatible string to make it really explicit. We'll include a nod to the existing driver and the old binding and say that we should always include the "qcom,ufshc" string in addition to the SoC compatible string. While we're at it we'll also include another example SoC known to have UFS: sdm845. Fixes: 47555a5c ("scsi: ufs: make the UFS variant a platform device") Signed-off-by:Douglas Anderson <dianders@chromium.org> Reviewed-by:
Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by:
-
Nathan Chancellor authored
Clang warns several times in the scsi subsystem (trimmed for brevity): drivers/scsi/hpsa.c:6209:7: warning: overflow converting case value to switch condition type (2147762695 to 18446744071562347015) [-Wswitch] case CCISS_GETBUSTYPES: ^ drivers/scsi/hpsa.c:6208:7: warning: overflow converting case value to switch condition type (2147762694 to 18446744071562347014) [-Wswitch] case CCISS_GETHEARTBEAT: ^ The root cause is that the _IOC macro can generate really large numbers, which don't fit into type 'int', which is used for the cmd parameter in the ioctls in scsi_host_template. My research into how GCC and Clang are handling this at a low level didn't prove fruitful. However, looking at the rest of the kernel tree, all ioctls use an 'unsigned int' for the cmd parameter, which will fit all of the _IOC values in the scsi/ata subsystems. Make that change because none of the ioctls expect a negative value for any command, it brings the ioctls inline with the reset of the kernel, and it removes ambiguity, which is never good when dealing with compilers. Link: https://github.com/ClangBuiltLinux/linux/issues/85 Link: https://github.com/ClangBuiltLinux/linux/issues/154 Link: https://github.com/ClangBuiltLinux/linux/issues/157Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Bradley Grove <bgrove@attotech.com> Acked-by:
Don Brace <don.brace@microsemi.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
-
- 06 Feb, 2019 1 commit
-
-
James Smart authored
Update lpfc version to 12.2.0.0 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
