- 18 Apr, 2017 37 commits
-
-
David Sterba authored
The members have been effectively unused since "Btrfs: rework qgroup accounting" (fcebe456), there's no substitute for assert_qgroups_uptodate so it's removed as well. Reviewed-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
David Sterba authored
The name is misleading and the local variable serves no purpose. Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
David Sterba authored
We can read fs_info from dev. Reviewed-by:
-
David Sterba authored
We can read fs_info from dev. Reviewed-by:
-
David Sterba authored
We can read fs_info from eb. Reviewed-by:
-
David Sterba authored
We can preallocate the node so insertion does not have to do that under the lock. The GFP flags for the global radix tree are initialized to GFP_NOFS & ~__GFP_DIRECT_RECLAIM but we can use GFP_KERNEL, because readahead is optional and not on any critical writeout path. Reviewed-by:
-
David Sterba authored
We can preallocate the node so insertion does not have to do that under the lock. The GFP flags for the per-device radix tree are initialized to GFP_NOFS & ~__GFP_DIRECT_RECLAIM but we can use GFP_KERNEL, same as an allocation above anyway, but also because readahead is optional and not on any critical writeout path. Reviewed-by:
-
Hans van Kranenburg authored
The btrfs_balance_args are only used for the balance ioctl, so use __u instead of __le here for consistency. The __le usage was introduced in bc309467 and dee32d0a and was probably a result of copy/pasting when the code was written. The usage of __le did not break anything, but it's unnecessary. Also, this change makes the code less confusing for the careful reader. Signed-off-by:
Hans van Kranenburg <hans.van.kranenburg@mendix.com> Reviewed-by:
-
Goldwyn Rodrigues authored
Code cleanup. The code block is for !(*flags & MS_RDONLY). We don't need to check it again. Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Liu Bo authored
We also don't bother to flush free space cache while with free space tree. Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
Liu Bo authored
These two BUG_ON()s would never be true, ensured by callers' logic. Reviewed-by:
-
Liu Bo authored
This adds a helper to show directly whether ops require full stripe. Reviewed-by:
-
Liu Bo authored
With this, we can avoid allocating memory for dev replace copies if the target dev is not available. Reviewed-by:
-
Liu Bo authored
Since this part is mostly independent, this moves it to a separate function. Reviewed-by:
-
Liu Bo authored
As the part of getting extra mirror in __btrfs_map_block is independent, this puts it into a separate function. Reviewed-by:
-
Liu Bo authored
Since DISCARD is not as important as an operation like write, we don't copy it to target device during replace, and it makes __btrfs_map_block less complex. Signed-off-by:
-
Liu Bo authored
We have similar code here and there, this merges them into a helper. Signed-off-by:
-
Liu Bo authored
While debugging truncate problems, I found that these tracepoints could help us quickly know what went wrong. Two sets of tracepoints are created to track regular/prealloc file item and inline file item respectively, I put inline as a separate one since what inline file items cares about are way less than the regular one. This adds four tracepoints: - btrfs_get_extent_show_fi_regular - btrfs_get_extent_show_fi_inline - btrfs_truncate_show_fi_regular - btrfs_truncate_show_fi_inline Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David Windsor <dwindsor@gmail.com> Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Liu Bo authored
After 76b42abb ("Btrfs: fix data loss after truncate when using the no-holes feature"), For either NO_HOLES or inline extents, we've set last_size to newsize to avoid data loss after remount or inode got evicted and read again, thus, we don't need this check anymore. Signed-off-by:
-
Adam Borowski authored
If your filesystem has, eg, data:raid0 metadata:raid1, and you run "btrfs balance -dconvert=raid1", the meta.target field will be uninitialized. That's otherwise ok, as it's unused except for this warning. Thus, let's use the existing set of raid levels for the comparison. As a side effect, non-convert balances will now nag about data>metadata. Signed-off-by:
Adam Borowski <kilobyte@angband.pl> Reviewed-by:
-
Dmitry V. Levin authored
Add file entries for btrfs header files. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
-
- 16 Apr, 2017 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Again, a batch that's been sitting a couple of weeks, mostly because I anticipated a bit more material but it didn't show up -- which is good. These are all your garden variety fixes for ARM platforms. The most visible issue fixed here is probably the SMP reset issue on OMAP, the rest are minor stuff" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: allwinner: a64: add pmu0 regs for USB PHY ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer reset: add exported __reset_control_get, return NULL if optional ARM: orion5x: only call into phylib when available ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend ARM: dts: ti: fix PCI bus dtc warnings ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY ARM: dts: OMAP3: Fix MFG ID EEPROM ARM: sun8i: a33: add operating-points-v2 property to all nodes ARM: sun8i: a33: remove highest OPP to fix CPU crashes
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Four small fixes. Three of them fix the same error in NVMe, in loop, fc, and rdma respectively. The last fix from Ming fixes a regression in this series, where our bvec gap logic was wrong and causes an oops on NVMe for certain conditions" * 'for-linus' of git://git.kernel.dk/linux-block: block: fix bio_will_gap() for first bvec with offset nvme-fc: Fix sqsize wrong assignment based on ctrl MQES capability nvme-rdma: Fix sqsize wrong assignment based on ctrl MQES capability nvme-loop: Fix sqsize wrong assignment based on ctrl MQES capability
-
