- 09 Feb, 2021 4 commits
-
-
Imre Deak authored
The TypeC FIA can be powered down if the TC-COLD power state is allowed, so block the TC-COLD state when initializing the FIA. Note that this isn't needed on ICL where the FIA is never modular and which has no generic way to block TC-COLD (except for platforms with a legacy TypeC port and on those too only via these legacy ports, not via a DP-alt/TBT port). Cc: <stable@vger.kernel.org> # v5.10+ Cc: José Roberto de Souza <jose.souza@intel.com> Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3027Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210208154303.6839-1-imre.deak@intel.comReviewed-by:
Jos� Roberto de Souza <jose.souza@intel.com>
-
Umesh Nerlige Ramappa authored
Gen12 supports additional OA formats as compared to what was added earlier. Include the additional OA formats. Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
-
Umesh Nerlige Ramappa authored
Variations in OA formats in the different gens has led to creation of several sparse arrays to store the formats. Move oa formats into a single array and format_mask to check for platform specific oa formats. Signed-off-by:
-
Umesh Nerlige Ramappa authored
Validity of an OA format is checked by using a sparse array of formats per gen. Instead maintain a mask of supported formats for a platform in the perf object. v2: Use set_bit and test_bit style for the format_mask (Chris) Signed-off-by:
-
- 08 Feb, 2021 9 commits
-
-
Tejas Upadhyay authored
Removing force probe protection from RKL platform. Did not observe warnings, errors, flickering or any visual defects while doing ordinary tasks like browsing and editing documents in a two monitor setup. Signed-off-by:
Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130124855.319226-1-tejaskumarx.surendrakumar.upadhyay@intel.com
-
Ankit Nautiyal authored
Legacy LSPCON chip from MCA and Parade is only used for platforms between GEN9 and GEN10. Fixing the HAS_LSPCON macro to reflect the same. Signed-off-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210208055554.24357-1-ankit.k.nautiyal@intel.com
-
Dave Airlie authored
This moves the code from various places and consolidates it into one new file. v2: - rename skl_program_plane -> skl_program_plane_scaler (Ville) - also move skl_pfit_enable, and consequently make some skl_scaler_* functions static to skl_scaler.c (Ville) Signed-off-by:
Dave Airlie <airlied@redhat.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Dave Airlie authored
Migrate this code out like the skylake code. Signed-off-by:
-
Dave Airlie authored
This moves the older i9xx/vlv/chv enable/disable to dpll file. Signed-off-by:
-
Dave Airlie authored
There is no need for this to be out of line. Reviewed-by:
-
Dave Airlie authored
This just cleans these up a bit. Signed-off-by:
-
Dave Airlie authored
Daniel suggested this should move here. v2: move vrr code. Signed-off-by:
-
Dave Airlie authored
Rework the plane init calls to do the gen test one level higher. Rework some of the plane helpers so they can live in new file, there is still some scope to clean up the plane/fb interactions later. v2: drop atomic code back, rename file to Ville suggestions, add header file. v3: move scaler bits back v4: drop wrong new includes (Ville) v5: integrate the ccs gen12 changes v6: fix unrelated code movement (Ville) Signed-off-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
- 05 Feb, 2021 10 commits
-
-
Ville Syrjälä authored
Replace the hand rolled intel_hdmi_port_clock() stuff with the real thing. Signed-off-by:
Mika Kahola <mika.kahola@intel.com>
-
Ville Syrjälä authored
min_cdclk[] and min_voltage_level[] are supposed to be indexed with the pipe. Fix up a few cases where we index via the crtc index (via the atomic iterators) instead. Signed-off-by:
-
Dave Airlie authored
Daniel asked for this, but it's a bit messy and I'm not sure how best to clean it up yet. Signed-off-by:
-
Dave Airlie authored
Ville suggested this, these tables are probably better being standalone. This fixes up the cnl/bxt interfaces to be like the others, the intel one I left alone since it has a few extra entrypoints. v2: add back missing rocketlake bits. Reviewed-by:
-
José Roberto de Souza authored
By mistake those 2 parameters were defined as read and write in the .h file while in the .c file it is read only. The intention here was to be read only to avoid the need of additional handling. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Petri Latvala <petri.latvala@intel.com> Signed-off-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204153357.39681-1-jose.souza@intel.com
-
Edmund Dea authored
While JSL and EHL eDP transcoder supports PSR2, the phy of this platforms only supports eDP 1.3, so removing PSR2 support as this feature was added in eDP 1.4. Signed-off-by:
Edmund Dea <edmund.j.dea@intel.com> Signed-off-by:
-
Gwan-gyeong Mun authored
In order to support the PSR state of each transcoder, it adds i915_psr_status to sub-directory of each transcoder. v2: Change using of Symbolic permissions 'S_IRUGO' to using of octal permissions '0444' v5: Addressed JJani Nikula's review comments - Remove checking of Gen12 for i915_psr_status. - Add check of HAS_PSR() - Remove meaningless check routine. Signed-off-by:Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
-
Gwan-gyeong Mun authored
It is a preliminary work for supporting multiple EDP PSR and DP PanelReplay. And it refactors singleton PSR to Multi Transcoder supportable PSR. And this moves and renames the i915_psr structure of drm_i915_private's to intel_dp's intel_psr structure. It also causes changes in PSR interrupt handling routine for supporting multiple transcoders. But it does not change the scenario and timing of enabling and disabling PSR. And it not support multiple pipes with a single transcoder PSR case yet. v2: Fix indentation and add comments v3: Remove Blank line v4: Rebased v5: Rebased and Addressed Anshuman's review comment. - Move calling of intel_psr_init() to intel_dp_init_connector() v6: Address Anshuman's review comments - Remove wrong comments and add comments for a limit of supporting of a single pipe PSR v7: Update intel_psr_compute_config() for supporting multiple transcoder PSR on BDW+ v8: Address Anshuman's review comments - Replace DRM_DEBUG_KMS with drm_dbg_kms() / DRM_WARN with drm_warn() v9: Fix commit message v10: Rebased v11: Address Jose's review comment. - Reorder calling order of intel_psr2_program_trans_man_trk_ctl(). - In order to reduce changes keep the old name for drm_i915_private. - Change restrictions of multiple instances of PSR. v12: Address Jose's review comment. - Change the calling of intel_psr2_program_trans_man_trk_ctl() into commit_pipe_config(). - Change a checking order of CAN_PSR() and connector_status to original on i915_psr_sink_status_show(). - Drop unneeded intel_dp_update_pipe() function. - In order to wait a specific encoder which belong to crtc_state on intel_psr_wait_for_idle(), add checking of encoder. - Add an whitespace to comments. v13: Rebased and Address Jose's review comment. - Add and use for_each_intel_psr_enabled_encoder() macro. - In order to use correct frontbuffer_bit for each pipe, fix intel_psr_invalidate() and intel_psr_flush(). - Remove redundant or unneeded codes. - Update comments. v14: Address Jose's review comment - Add and use for_each_intel_encoder_can_psr() macro and for_each_intel_encoder_mask_can_psr() macro. - Add source_support member variable into intel_psr structure. - Update CAN_PSR() macro that checks source_support. - Move encoder's PSR availity check to psr_init() from psr_compute_config(). - Remove redundant or unneeded codes. v15: Remove wrong mutex lock/unlock of PSR from intel_psr2_program_trans_man_trk_ctl() Signed-off-by: -
Clint Taylor authored
Add DDR5 and LPDDR5 return values from punit fw. BSPEC: 54023 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by:
-
Ville Syrjälä authored
The BXT/GLK DPLL can't generate certain frequencies. We already reject the 233-240MHz range on both. But on GLK the DPLL max frequency was bumped from 300MHz to 594MHz, so now we get to also worry about the 446-480MHz range (double the original problem range). Reject any frequency within the higher problematic range as well. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3000Signed-off-by:
-
- 04 Feb, 2021 2 commits
-
-
Imre Deak authored
At least on some TGL platforms PUNIT wants to access some display HW registers, but it doesn't handle display power management (disabling DC states as required) and so this register access will lead to a hang. To prevent this disable runtime power management for poweroff and reboot. v2: - Add code comment clarifying the requirement of display power states. (Ville) Reported-and-tested-by:
Khaled Almahallawy <khaled.almahallawy@intel.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a drm_dbg message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 02 Feb, 2021 5 commits
-
-
Jani Nikula authored
Merge tag 'topic/drm-device-pdev-2021-02-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next Driver Changes: - drm/i915: Remove references to struct drm_device.pdev Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert i915 to struct drm_device.dev. No functional changes. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert i915 to struct drm_device.dev. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert i915 to struct drm_device.dev. No functional changes. v6: * also remove assignment in selftests/ in a later patch (Chris) v5: * remove assignment in later patch (Chris) v3: * rebased v2: * move gt/ and gvt/ changes into separate patches Signed-off-by:
-
Jani Nikula authored
Merge tag 'topic/adl-s-enabling-2021-02-01-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next Driver Changes: - Add basic support for Alder Lake S, to be shared between drm-intel-next and drm-intel-gt-next Signed-off-by:
-
- 01 Feb, 2021 10 commits
-
-
Aditya Swarup authored
- Extend Wa_1606931601 and Wa_1409804808 to ADL-S. - Extend Wa_14010919138 and Wa_14010229206 to ADL-S (Madhumitha) - Extend Wa_22010271021 to ADLS (cyokoyam) v2: - Extend Wa_1409804808 and remove unnecessary branching/redundant adls workaround placeholder functions. - Split WAs properly based on previous platforms and applicable ADLS WA. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com> Signed-off-by:
Aditya Swarup <aditya.swarup@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Aditya Swarup authored
- Extend permanent driver WA Wa_1409767108, Wa_14010685332 and Wa_14011294188 to adl-s. - Extend permanent driver WA Wa_1606054188 to adl-s. - Add Wa_14011765242 for adl-s A0 stepping. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Tejas Upadhyay authored
Just like RKL, the ADL_S platform also has different memory characteristics from past platforms. Update the values used by our memory bandwidth calculations accordingly. v2: Fix minor nitpick for shifting ADLS case above RKL(based on platform order).(mdroper) Bspec: 64631 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
Load DMC on ADL_S v2.01. This is the first offcial release of DMC for ADL_S. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by:
-
José Roberto de Souza authored
- As RKL and ADL-S only have 5 planes, primary and 4 sprites and the cursor plane, let's group the handling together under HAS_D12_PLANE_MINIMIZATION. - Also use macro to select pipe irq fault error mask. BSpec: 49251 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Matt Roper authored
ADL-S, like RKL, uses the same internal device ID for the GuC and HuC as TGL did, making them all firmware-compatible. Let's re-use TGL's firmware for ADL-S. Bspec: 50668 Cc: John Harrison <John.C.Harrison@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Lucas De Marchi authored
TGL power wells can be re-used for ADL-S with the exception of the fake power well for TC_COLD, just like DG-1. BSpec: 53597 Bspec: 49231 Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Matt Roper authored
ADL-S switches up which PHYs are considered a master to other PHYs; PHY-C is no longer a master, but PHY-D is now. Bspec: 49291 Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Jani Nikula authored
Make the child device details easier to read by turning this: [drm:parse_ddi_port [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 [drm:parse_ddi_port [i915]] VBT HDMI level shift for port B: 8 [drm:parse_ddi_port [i915]] VBT DP max link rate for port B: 810000 [drm:parse_ddi_port [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 [drm:parse_ddi_port [i915]] VBT HDMI level shift for port C: 8 [drm:parse_ddi_port [i915]] VBT (e)DP boost level for port C: 3 [drm:parse_ddi_port [i915]] VBT HDMI boost level for port C: 1 [drm:parse_ddi_port [i915]] VBT DP max link rate for port C: 810000 into this: [drm:parse_ddi_port [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 [drm:parse_ddi_port [i915]] Port B VBT HDMI level shift: 8 [drm:parse_ddi_port [i915]] Port B VBT DP max link rate: 810000 [drm:parse_ddi_port [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 [drm:parse_ddi_port [i915]] Port C VBT HDMI level shift: 8 [drm:parse_ddi_port [i915]] Port C VBT (e)DP boost level: 3 [drm:parse_ddi_port [i915]] Port C VBT HDMI boost level: 1 [drm:parse_ddi_port [i915]] Port C VBT DP max link rate: 810000 Reviewed-by:
-
Juston Li authored
Like the patch to disable QSES for HDCP 1.4 over MST https://patchwork.freedesktop.org/patch/415297/ the HDCP2.2 spec doesn't require QSES as well and we've seen QSES not supported on a couple HDCP2.2 docks so far (Dell WD19 and Lenovo LDC-G2) Remove it for now until we get a better idea of how widely supported QSES is and how to support it optionally. Signed-off-by:
Juston Li <juston.li@intel.com> Reviewed-by:
-
