- 21 Mar, 2019 27 commits
-
-
Vlad Buslov authored
Extend fl_flow_mask structure with reference counter to allow parallel modification without relying on rtnl lock. Use rcu read lock to safely lookup mask and increment reference counter in order to accommodate concurrent deletes. Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
In order to prevent double deletion of filter by concurrent tasks when rtnl lock is not used for synchronization, add 'deleted' filter field. Check value of this field when modifying filters and return error if concurrent deletion is detected. Refactor __fl_delete() to accept pointer to 'last' boolean as argument, and return error code as function return value instead. This is necessary to signal concurrent filter delete to caller. Signed-off-by:
-
Vlad Buslov authored
Extend flower filters with reference counting in order to remove dependency on rtnl lock in flower ops and allow to modify filters concurrently. Reference to flower filter can be taken/released concurrently as soon as it is marked as 'unlocked' by last patch in this series. Use atomic reference counter type to make concurrent modifications safe. Always take reference to flower filter while working with it: - Modify fl_get() to take reference to filter. - Implement tp->put() callback as fl_put() function to allow cls API to release reference taken by fl_get(). - Modify fl_change() to assume that caller holds reference to fold and take reference to fnew. - Take reference to filter while using it in fl_walk(). Implement helper functions to get/put filter reference counter. Signed-off-by:
-
Vlad Buslov authored
As a preparation for using classifier spinlock instead of relying on external rtnl lock, rearrange code in fl_change. The goal is to group the code which changes classifier state in single block in order to allow following commits in this set to protect it from parallel modification with tp->lock. Data structures that require tp->lock protection are mask hashtable and filters list, and classifier handle_idr. fl_hw_replace_filter() is a sleeping function and cannot be called while holding a spinlock. In order to execute all sequence of changes to shared classifier data structures atomically, call fl_hw_replace_filter() before modifying them. Signed-off-by:
-
Vlad Buslov authored
Flower classifier only changes root pointer during init and destroy. Cls API implements reference counting for tcf_proto, so there is no danger of concurrent access to tp when it is being destroyed, even without protection provided by rtnl lock. Implement new function fl_head_dereference() to dereference tp->root without checking for rtnl lock. Use it in all flower function that obtain head pointer instead of rtnl_dereference(). Signed-off-by:
-
Jakub Kicinski authored
NFP driver ABI contains bits for L2 switching which were never implemented in initially envisioned form. Remove the defines, and open up the possibility of reclaiming the bits for other uses. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
David S. Miller authored
NeilBrown says: ==================== Two clean-ups for rhashtable. These two patches make small improvements to rhashtable, but are otherwise unrelated. Thanks to Herbert, Miguel, and Paul for the review. ==================== Signed-off-by: -
NeilBrown authored
The pattern set by list.h is that for_each..continue() iterators start at the next entry after the given one, while for_each..from() iterators start at the given entry. The rht_for_each*continue() iterators are documented as though the start at the 'next' entry, but actually start at the given entry, and they are used expecting that behaviour. So fix the documentation and change the names to *from for consistency with list.h Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
NeilBrown authored
rhashtable_try_insert() currently holds a lock on the bucket in the first table, while also locking buckets in subsequent tables. This is unnecessary and looks like a hold-over from some earlier version of the implementation. As insert and remove always lock a bucket in each table in turn, and as insert only inserts in the final table, there cannot be any races that are not covered by simply locking a bucket in each table in turn. When an insert call reaches that last table it can be sure that there is no matchinf entry in any other table as it has searched them all, and insertion never happens anywhere but in the last table. The fact that code tests for the existence of future_tbl while holding a lock on the relevant bucket ensures that two threads inserting the same key will make compatible decisions about which is the "last" table. This simplifies the code and allows the ->rehash field to be discarded. We still need a way to ensure that a dead bucket_table is never re-linked by rhashtable_walk_stop(). This can be achieved by calling call_rcu() inside the locked region, and checking with rcu_head_after_call_rcu() in rhashtable_walk_stop() to see if the bucket table is empty and dead. Acked-by:
Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: phy: Move Omega PHY entry to Cygnus PHY driver In order to pave the way for adding some specific Omega PHY features that may not be desirable on other products covered by the bcm7xxx PHY driver, split the Omega PHY entry into the Cygnus PHY driver such that the PHY drivers are reflective of product lines/business units maintaining them within Broadcom. No functional changes intended. ==================== Acked-by:
Arun Parameswaran <arun.parameswaran@broadcom.com> Signed-off-by:
-
Florian Fainelli authored
Cygnus and Omega are part of the same business unit and product line, it makes sense to group PHY entries by products such that a platform can select only the drivers that it needs. Bring all the functionality that the BCM7XXX_28NM_GPHY() macro hides for us and remove the Omega PHY entry from bcm7xxx.c. As an added bonus, we now have a proper mdio_device_id entry to permit auto-loading. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Scott Branden <scott.branden@broadcom.com> Signed-off-by:
-
Florian Fainelli authored
The Omega PHY entry was added to bcm7xxx.c out of convenience and this breaks the one driver per product line paradigm that was applied up until now. Since the AFE initialization is shared between Omega and BCM7xxx move the relevant functions to bcm-phy-lib.[ch]. No functional changes introduced. Signed-off-by:
-
Julian Wiedmann authored
Get rid of some obsolete gc-related documentation and macros that were missed in commit 5b7c9a8f ("net: remove dst gc related code"). CC: Wei Wang <weiwan@google.com> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Acked-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: broadcom: Remove print of base address Some broadcom MDIO/switch/Ethernet MAC drivers insist on printing the base register virtual address which has little value. ==================== Signed-off-by: -
Florian Fainelli authored
Since commit ad67b74d ("printk: hash addresses printed with %p") pointers are being hashed when printed. Displaying the virtual memory at bootup time is not helpful, especially given we use a dev_info() which already displays the platform device's address. Signed-off-by:
-
Florian Fainelli authored
Since commit ad67b74d ("printk: hash addresses printed with %p") pointers are being hashed when printed. Displaying the virtual memory at bootup time is not helpful, we use a dev_info() print which already displays the platform device's address. Signed-off-by:
-
Florian Fainelli authored
Since commit ad67b74d ("printk: hash addresses printed with %p") pointers are being hashed when printed. Displaying the virtual memory at bootup time is not helpful, especially given we use a dev_info() which already displays the platform device's address. Signed-off-by:
-
David Ahern authored
net and null_fallback are redundant. Remove null_fallback in favor of !net check. Signed-off-by:
David Ahern <dsahern@gmail.com> Acked-by:
-
David Ahern authored
fib_trie implementation calls synchronize_rcu when a certain amount of pages are dirty from freed entries. The number of pages was determined experimentally in 2009 (commit c3059477). At the current setting, synchronize_rcu is called often -- 51 times in a second in one test with an average of an 8 msec delay adding a fib entry. The total impact is a lot of slow down modifying the fib. This is seen in the output of 'time' - the difference between real time and sys+user. For example, using 720,022 single path routes and 'ip -batch'[1]: $ time ./ip -batch ipv4/routes-1-hops real 0m14.214s user 0m2.513s sys 0m6.783s So roughly 35% of the actual time to install the routes is from the ip command getting scheduled out, most notably due to synchronize_rcu (this is observed using 'perf sched timehist'). This patch makes the amount of dirty memory configurable between 64k where the synchronize_rcu is called often (small, low end systems that are memory sensitive) to 64M where synchronize_rcu is called rarely during a large FIB change (for high end systems with lots of memory). The default is 512kB which corresponds to the current setting of 128 pages with a 4kB page size. As an example, at 16MB the worst interval shows 4 calls to synchronize_rcu in a second blocking for up to 30 msec in a single instance, and a total of almost 100 msec across the 4 calls in the second. The trade off is allowing FIB entries to consume more memory in a given time window but but with much better fib insertion rates (~30% increase in prefixes/sec). With this patch and net.ipv4.fib_sync_mem set to 16MB, the same batch file runs in: $ time ./ip -batch ipv4/routes-1-hops real 0m9.692s user 0m2.491s sys 0m6.769s So the dead time is reduced to about 1/2 second or <5% of the real time. [1] 'ip' modified to not request ACK messages which improves route insertion times by about 20% Signed-off-by:
-
Kirill Tkhai authored
Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
-
Kirill Tkhai authored
In commit f2780d6d "tun: Add ioctl() SIOCGSKNS cmd to allow obtaining net ns of tun device" it was missed that tun may change its net ns, while net ns of socket remains the same as it was created initially. SIOCGSKNS returns net ns of socket, so it is not suitable for obtaining net ns of device. We may have two tun devices with the same names in two net ns, and in this case it's not possible to determ, which of them fd refers to (TUNGETIFF will return the same name). This patch adds new ioctl() cmd for obtaining net ns of a device. Reported-by:
Harald Albrecht <harald.albrecht@gmx.net> Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== ipv6: Change addrconf_f6i_alloc to use ip6_route_info_create addrconf_f6i_alloc is the last caller of fib6_info_alloc besides ip6_route_info_create. There really is no good reason for it do its own fib6_info initialization, so convert it to call ip6_route_info_create. ==================== Signed-off-by: -
David Ahern authored
Change addrconf_f6i_alloc to generate a fib6_config and call ip6_route_info_create. addrconf_f6i_alloc is the last caller to fib6_info_alloc besides ip6_route_info_create, and there is no reason for it to do its own initialization on a fib6_info. Host routes need to be created even if the device is down, so add a new flag, fc_ignore_dev_down, to fib6_config and update fib6_nh_init to not error out if device is not up. Notes on the conversion: - ip_fib_metrics_init is the same as fib6_config has fc_mx set to NULL and fc_mx_len set to 0 - dst_nocount is handled by the RTF_ADDRCONF flag - dst_host is handled by fc_dst_len = 128 nh_gw does not get set after the conversion to ip6_route_info_create but it should not be set in addrconf_f6i_alloc since this is a host route not a gateway route. Everything else is a straight forward map between fib6_info and fib6_config. Signed-off-by:
-
David Ahern authored
ip6_route_info_create is a low level function for ensuring fc_metric is set. Move the check and default setting to the 2 locations that do not already set fc_metric before calling ip6_route_info_create. This is required for the next patch which moves addrconf allocations to ip6_route_info_create and want the metric for host routes to be 0. Signed-off-by:
-
Vakul Garg authored
To free the skb in normal course of processing, consume_skb() should be used. Only for failure paths, skb_free() is intended to be used. https://www.kernel.org/doc/htmldocs/networking/API-consume-skb.htmlSigned-off-by:
Vakul Garg <vakul.garg@nxp.com> Signed-off-by:
-
Hoang Le authored
In commit c55c8eda ("tipc: smooth change between replicast and broadcast") we introduced new method to eliminate the risk of message reordering that happen in between different nodes. Unfortunately, we forgot checking at receiving side to ignore intra node. We fix this by checking and returning if arrived message from intra node. syzbot report: ================================================================== kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 7820 Comm: syz-executor418 Not tainted 5.0.0+ #61 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tipc_mcast_filter_msg+0x21b/0x13d0 net/tipc/bcast.c:782 Code: 45 c0 0f 84 39 06 00 00 48 89 5d 98 e8 ce ab a5 fa 49 8d bc 24 c8 00 00 00 48 b9 00 00 00 00 00 fc ff df 48 89 f8 48 c1 e8 03 <80> 3c 08 00 0f 85 9a 0e 00 00 49 8b 9c 24 c8 00 00 00 48 be 00 00 RSP: 0018:ffff8880959defc8 EFLAGS: 00010202 RAX: 0000000000000019 RBX: ffff888081258a48 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffffffff86cab862 RDI: 00000000000000c8 RBP: ffff8880959df030 R08: ffff8880813d0200 R09: ffffed1015d05bc8 R10: ffffed1015d05bc7 R11: ffff8880ae82de3b R12: 0000000000000000 R13: 000000000000002c R14: 0000000000000000 R15: ffff888081258a48 FS: 000000000106a880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020001cc0 CR3: 0000000094a20000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tipc_sk_filter_rcv+0x182d/0x34f0 net/tipc/socket.c:2168 tipc_sk_enqueue net/tipc/socket.c:2254 [inline] tipc_sk_rcv+0xc45/0x25a0 net/tipc/socket.c:2305 tipc_sk_mcast_rcv+0x724/0x1020 net/tipc/socket.c:1209 tipc_mcast_xmit+0x7fe/0x1200 net/tipc/bcast.c:410 tipc_sendmcast+0xb36/0xfc0 net/tipc/socket.c:820 __tipc_sendmsg+0x10df/0x18d0 net/tipc/socket.c:1358 tipc_sendmsg+0x53/0x80 net/tipc/socket.c:1291 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 ___sys_sendmsg+0x806/0x930 net/socket.c:2260 __sys_sendmsg+0x105/0x1d0 net/socket.c:2298 __do_sys_sendmsg net/socket.c:2307 [inline] __se_sys_sendmsg net/socket.c:2305 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2305 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4401c9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd887fa9d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401c9 RDX: 0000000000000000 RSI: 0000000020002140 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a50 R13: 0000000000401ae0 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace ba79875754e1708f ]--- Reported-by: syzbot+be4bdf2cc3e85e952c50@syzkaller.appspotmail.com Fixes: c55c8eda ("tipc: smooth change between replicast and broadcast") Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by:
-
Hoang Le authored
skb free-ed in: 1/ condition 1: tipc_sk_filter_rcv -> tipc_sk_proto_rcv 2/ condition 2: tipc_sk_filter_rcv -> tipc_group_filter_msg This leads to a "use-after-free" access in the next condition. We fix this by intializing the variable at declaration, then it is safe to check this variable to continue processing if condition matches. syzbot report: ================================================================== BUG: KASAN: use-after-free in tipc_sk_filter_rcv+0x2166/0x34f0 net/tipc/socket.c:2167 Read of size 4 at addr ffff88808ea58534 by task kworker/u4:0/7 CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.0.0+ #61 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: tipc_send tipc_conn_send_work Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 tipc_sk_filter_rcv+0x2166/0x34f0 net/tipc/socket.c:2167 tipc_sk_enqueue net/tipc/socket.c:2254 [inline] tipc_sk_rcv+0xc45/0x25a0 net/tipc/socket.c:2305 tipc_topsrv_kern_evt+0x3b7/0x580 net/tipc/topsrv.c:610 tipc_conn_send_to_sock+0x43e/0x5f0 net/tipc/topsrv.c:283 tipc_conn_send_work+0x65/0x80 net/tipc/topsrv.c:303 process_one_work+0x98e/0x1790 kernel/workqueue.c:2269 worker_thread+0x98/0xe40 kernel/workqueue.c:2415 kthread+0x357/0x430 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+e863893591cc7a622e40@syzkaller.appspotmail.com Fixes: c55c8eda ("tipc: smooth change between replicast and broadcast") Acked-by:
-
- 20 Mar, 2019 13 commits
-
-
Stephen Suryaputra authored
In addition to icmp_echo_ignore_multicast, there is a need to also prevent responding to pings to anycast addresses for security. Signed-off-by:
Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by:
-
YueHaibing authored
Fix sparse warnings: drivers/isdn/i4l/isdn_ppp.c:1891:16: warning: symbol 'isdn_ppp_mp_discard' was not declared. Should it be static? drivers/isdn/i4l/isdn_ppp.c:1903:6: warning: symbol 'isdn_ppp_mp_reassembly' was not declared. Should it be static? Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
Fix sparse warning: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:414:6: warning: symbol 'hclge_destroy_cmd_queue' was not declared. Should it be static? Signed-off-by:
-
David S. Miller authored
Paolo Abeni says: ==================== net: refactor ndo_select_queue() Currently, on most devices implementing ndo_select_queue(), we get 2 indirect calls per xmit packet, at least in some scenarios. We can avoid one of such indirect calls refactoring the ndo_select_queue() usage so that we don't need anymore the 'fallback' argument. The first patch renames a helper used later as a public API, the second one changes the af packet implementation so that it uses the common infrastructure to select the xmit queue, and the second patch drops the now unneeded argument from ndo_select_queue(). Alternatively we could use the INDIRECT_CALL_WRAPPER infrastructure to avoid the fallback indirect call in the common case, but this solution allows also for some code cleanup. v1 -> v2: - renamed select queue helpers, as per Eric's and David's suggestions ==================== Signed-off-by: -
Paolo Abeni authored
After the previous patch, all the callers of ndo_select_queue() provide as a 'fallback' argument netdev_pick_tx. The only exceptions are nested calls to ndo_select_queue(), which pass down the 'fallback' available in the current scope - still netdev_pick_tx. We can drop such argument and replace fallback() invocation with netdev_pick_tx(). This avoids an indirect call per xmit packet in some scenarios (TCP syn, UDP unconnected, XDP generic, pktgen) with device drivers implementing such ndo. It also clean the code a bit. Tested with ixgbe and CONFIG_FCOE=m With pktgen using queue xmit: threads vanilla patched (kpps) (kpps) 1 2334 2428 2 4166 4278 4 7895 8100 v1 -> v2: - rebased after helper's name change Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
Currently packet_pick_tx_queue() is the only caller of ndo_select_queue() using a fallback argument other than netdev_pick_tx. Leveraging rx queue, we can obtain a similar queue selection behavior using core helpers. After this change, ndo_select_queue() is always invoked with netdev_pick_tx() as fallback. We can change ndo_select_queue() signature in a followup patch, dropping an indirect call per transmitted packet in some scenarios (e.g. TCP syn and XDP generic xmit) This changes slightly how af packet queue selection happens when PACKET_QDISC_BYPASS is set. It's now more similar to plan dev_queue_xmit() tacking in account both XPS and TC mapping. v1 -> v2: - rebased after helper name change RFC -> v1: - initialize sender_cpu to the expected value Signed-off-by:
-
Paolo Abeni authored
With the following patches, we are going to use __netdev_pick_tx() in many modules. Rename it to netdev_pick_tx(), to make it clear is a public API. Also rename the existing netdev_pick_tx() to netdev_core_pick_tx(), to avoid name clashes. Suggested-by:
Eric Dumazet <edumazet@google.com> Suggested-by:
-
David S. Miller authored
Sudarsana Reddy Kalluru says: ==================== qed* enhancements. The patch series adds couple of enhancements for qed/qede drivers. Please consider applying it to 'net-next' tree. ==================== Signed-off-by: -
Sudarsana Reddy Kalluru authored
The patch introduces a new Multi-Function bit for cases where firmware shouldn't perform the insertion of vlan-0 tag. The new bit is defined to abstract the implementation from the actual MF mode. Signed-off-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
Michal Kalderon <mkalderon@marvell.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
The patch adds support to display MBI image version in 'ethtool -i' output. Signed-off-by:
-
Hangbin Liu authored
Similiar to commit a6111d3c ("vlan: Pass SIOC[SG]HWTSTAMP ioctls to real device") and commit 37dd9255 ("vlan: Pass ethtool get_ts_info queries to real device."), add MACVlan HW ptp support. Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Mao Wenan authored
This patch is to use eth_broadcast_addr() to assign broadcast address insetad of memset(). Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
Vakul Garg authored
Added support for AES128-CCM based record encryption. AES128-CCM is similar to AES128-GCM. Both of them have same salt/iv/mac size. The notable difference between the two is that while invoking AES128-CCM operation, the salt||nonce (which is passed as IV) has to be prefixed with a hardcoded value '2'. Further, CCM implementation in kernel requires IV passed in crypto_aead_request() to be full '16' bytes. Therefore, the record structure 'struct tls_rec' has been modified to reserve '16' bytes for IV. This works for both GCM and CCM based cipher. Signed-off-by:
-
