- 07 Oct, 2020 40 commits
-
-
Nikolay Borisov authored
When adding a new device there's a mandatory check to see if a device is being duplicated to the filesystem it's added to. Since this is a read-only operations not necessary to take device_list_mutex and can simply make do with an rcu-readlock. Using just RCU is safe because there won't be another device add delete running in parallel as btrfs_init_new_device is called only from btrfs_ioctl_add_dev. Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Qu Wenruo authored
[BUG] With a crafted image, btrfs can panic at btrfs_del_csums(): kernel BUG at fs/btrfs/ctree.c:3188! invalid opcode: 0000 [#1] SMP PTI CPU: 0 PID: 1156 Comm: btrfs-transacti Not tainted 5.0.0-rc8+ #9 RIP: 0010:btrfs_set_item_key_safe+0x16c/0x180 RSP: 0018:ffff976141257ab8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff898a6b890930 RCX: 0000000004b70000 RDX: 0000000000000000 RSI: ffff976141257bae RDI: ffff976141257acf RBP: ffff976141257b10 R08: 0000000000001000 R09: ffff9761412579a8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff976141257abe R13: 0000000000000003 R14: ffff898a6a8be578 R15: ffff976141257bae FS: 0000000000000000(0000) GS:ffff898a77a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f779d9cd624 CR3: 000000022b2b4006 CR4: 00000000000206f0 Call Trace: truncate_one_csum+0xac/0xf0 btrfs_del_csums+0x24f/0x3a0 __btrfs_free_extent.isra.72+0x5a7/0xbe0 __btrfs_run_delayed_refs+0x539/0x1120 btrfs_run_delayed_refs+0xdb/0x1b0 btrfs_commit_transaction+0x52/0x950 ? start_transaction+0x94/0x450 transaction_kthread+0x163/0x190 kthread+0x105/0x140 ? btrfs_cleanup_transaction+0x560/0x560 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x35/0x40 Modules linked in: ---[ end trace 93bf9db00e6c374e ]--- [CAUSE] This crafted image has a tricky key order corruption: checksum tree key (CSUM_TREE ROOT_ITEM 0) node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE ... key (EXTENT_CSUM EXTENT_CSUM 73785344) block 29757440 gen 19 key (EXTENT_CSUM EXTENT_CSUM 77594624) block 29753344 gen 19 ... leaf 29757440 items 5 free space 150 generation 19 owner CSUM_TREE item 0 key (EXTENT_CSUM EXTENT_CSUM 73785344) itemoff 2323 itemsize 1672 range start 73785344 end 75497472 length 1712128 item 1 key (EXTENT_CSUM EXTENT_CSUM 75497472) itemoff 2319 itemsize 4 range start 75497472 end 75501568 length 4096 item 2 key (EXTENT_CSUM EXTENT_CSUM 75501568) itemoff 579 itemsize 1740 range start 75501568 end 77283328 length 1781760 item 3 key (EXTENT_CSUM EXTENT_CSUM 77283328) itemoff 575 itemsize 4 range start 77283328 end 77287424 length 4096 item 4 key (EXTENT_CSUM EXTENT_CSUM 4120596480) itemoff 275 itemsize 300 <<< range start 4120596480 end 4120903680 length 307200 leaf 29753344 items 3 free space 1936 generation 19 owner CSUM_TREE item 0 key (18446744073457893366 EXTENT_CSUM 77594624) itemoff 2323 itemsize 1672 range start 77594624 end 79306752 length 1712128 ... Note the item 4 key of leaf 29757440, which is obviously too large, and even larger than the first key of the next leaf. However it still follows the key order in that tree block, thus tree checker is unable to detect it at read time, since tree checker can only work inside one leaf, thus such complex corruption can't be detected in advance. [FIX] The next time to detect such problem is at tree block merge time, which is in push_node_left(), balance_node_right(), push_leaf_left() or push_leaf_right(). Now we check if the key order of the right-most key of the left node is larger than the left-most key of the right node. By this we don't need to call the full tree-checker, while still keeping the key order correct as key order in each node is already checked by tree checker thus we only need to check the above two slots. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202833Reviewed-by:Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
[BUG] With a crafted image, btrfs can panic at insert_inline_extent_backref(): kernel BUG at fs/btrfs/extent-tree.c:1857! invalid opcode: 0000 [#1] SMP PTI CPU: 0 PID: 1117 Comm: btrfs-transacti Not tainted 5.0.0-rc8+ #9 RIP: 0010:insert_inline_extent_backref+0xcc/0xe0 RSP: 0018:ffffac4dc1287be8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000007 RCX: 0000000000000001 RDX: 0000000000001000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffac4dc1287c28 R08: ffffac4dc1287ab8 R09: ffffac4dc1287ac0 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8febef88a540 R14: ffff8febeaa7bc30 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8febf7a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f663ace94c0 CR3: 0000000235698006 CR4: 00000000000206f0 Call Trace: ? _cond_resched+0x1a/0x50 __btrfs_inc_extent_ref.isra.64+0x7e/0x240 ? btrfs_merge_delayed_refs+0xa5/0x330 __btrfs_run_delayed_refs+0x653/0x1120 btrfs_run_delayed_refs+0xdb/0x1b0 btrfs_commit_transaction+0x52/0x950 ? start_transaction+0x94/0x450 transaction_kthread+0x163/0x190 kthread+0x105/0x140 ? btrfs_cleanup_transaction+0x560/0x560 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x35/0x40 Modules linked in: ---[ end trace 2ad8b3de903cf825 ]--- [CAUSE] Due to extent tree corruption (still valid by itself, but bad cross ref), we can allocate an extent which is still in extent tree. The offending tree block of that case is from csum tree. The newly allocated tree block is also for csum tree. Then we will try to insert a tree block ref for the existing tree block ref. For a tree extent item, tree block can never be shared directly by the same tree twice. We have such BUG_ON() to prevent such problem, but this is not a proper error handling. [FIX] Replace that BUG_ON() with proper error message and leaf dump for debug build. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202829Reviewed-by:
-
Qu Wenruo authored
__btrfs_free_extent() is doing two things: 1. Reduce the refs number of an extent backref Either it's an inline extent backref (inside EXTENT/METADATA item) or a keyed extent backref (SHARED_* item). We only need to locate that backref line, either reduce the number or remove the backref line completely. 2. Update the refs count in EXTENT/METADATA_ITEM During step 1), we will try to locate the EXTENT/METADATA_ITEM without triggering another btrfs_search_slot() as fast path. Only when we fail to locate that item, we will trigger another btrfs_search_slot() to get that EXTENT/METADATA_ITEM after we updated/deleted the backref line. And we have a lot of strict checks on things like refs_to_drop against extent refs and special case checks for single ref extents. There are 7 BUG_ON()s, although they're doing correct checks, they can be triggered by crafted images. This patch improves the function: - Introduce two examples to show what __btrfs_free_extent() is doing One inline backref case and one keyed case. Should cover most cases. - Kill all BUG_ON()s with proper error message and optional leaf dump - Add comment to show the overall flow Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202819 [ The report triggers one BUG_ON() in __btrfs_free_extent() ] Reviewed-by:
-
Qu Wenruo authored
Although we have start, len check for extent buffer reader/write (e.g. read_extent_buffer()), these checks have limitations: - No overflow check Values like start = 1024 len = -1024 can still pass the basic (start + len) > eb->len check. - Checks are not consistent For read_extent_buffer() we only check (start + len) against eb->len. While for memcmp_extent_buffer() we also check start against eb->len. - Different error reporting mechanism We use WARN() in read_extent_buffer() but BUG() in memcpy_extent_buffer(). - Still modify memory if the request is obviously wrong In read_extent_buffer() even we find (start + len) > eb->len, we still call memset(dst, 0, len), which can easily cause memory access error if start + len overflows. To address above problems, this patch creates a new common function to check such access, check_eb_range(). - Add overflow check This function checks start, start + len against eb->len and overflow check. - Unified checks - Unified error reports Will call WARN() if CONFIG_BTRFS_DEBUG is configured. And also do btrfs_warn() message for non-debug build. - Exit ASAP if check fails No more possible memory corruption. - Add extra comment for @start @len used in those functions as it's sometimes confused with the logical addressing instead of a range inside the eb space Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202817 [ Inspired by above report, the report itself is already addressed ] Reviewed-by:
-
Nikolay Borisov authored
To avoid duplicating 3 lines of code the error detection logic in init_tree_roots is somewhat quirky. It first checks for the presence of any error condition, then checks for the specific condition to perform any specific actions. That's spurious because directly checking for each respective error condition and doing the necessary steps is more obvious. While at it change the -EUCLEAN to -EIO in case the extent buffer is not read correctly, this is in line with other sites which return -EIO when the eb couldn't be read. Additionally it results in smaller code and the code reads more linearly: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-95 (-95) Function old new delta open_ctree 17243 17148 -95 Total: Before=113104, After=113009, chg -0.08% Signed-off-by:
-
Qu Wenruo authored
[BUG] When quota is enabled for TEST_DEV, generic/013 sometimes fails like this: generic/013 14s ... _check_dmesg: something found in dmesg (see xfstests-dev/results//generic/013.dmesg) And with the following metadata leak: BTRFS warning (device dm-3): qgroup 0/1370 has unreleased space, type 2 rsv 49152 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 47912 at fs/btrfs/disk-io.c:4078 close_ctree+0x1dc/0x323 [btrfs] Call Trace: btrfs_put_super+0x15/0x17 [btrfs] generic_shutdown_super+0x72/0x110 kill_anon_super+0x18/0x30 btrfs_kill_super+0x17/0x30 [btrfs] deactivate_locked_super+0x3b/0xa0 deactivate_super+0x40/0x50 cleanup_mnt+0x135/0x190 __cleanup_mnt+0x12/0x20 task_work_run+0x64/0xb0 __prepare_exit_to_usermode+0x1bc/0x1c0 __syscall_return_slowpath+0x47/0x230 do_syscall_64+0x64/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace a6cfd45ba80e4e06 ]--- BTRFS error (device dm-3): qgroup reserved space leaked BTRFS info (device dm-3): disk space caching is enabled BTRFS info (device dm-3): has skinny extents [CAUSE] The qgroup preallocated meta rsv operations of that offending root are: btrfs_delayed_inode_reserve_metadata: rsv_meta_prealloc root=1370 num_bytes=131072 btrfs_delayed_inode_reserve_metadata: rsv_meta_prealloc root=1370 num_bytes=131072 btrfs_subvolume_reserve_metadata: rsv_meta_prealloc root=1370 num_bytes=49152 btrfs_delayed_inode_release_metadata: convert_meta_prealloc root=1370 num_bytes=-131072 btrfs_delayed_inode_release_metadata: convert_meta_prealloc root=1370 num_bytes=-131072 It's pretty obvious that, we reserve qgroup meta rsv in btrfs_subvolume_reserve_metadata(), but doesn't have corresponding release/convert calls in btrfs_subvolume_release_metadata(). This leads to the leakage. [FIX] To fix this bug, we should follow what we're doing in btrfs_delalloc_reserve_metadata(), where we reserve qgroup space, and add it to block_rsv->qgroup_rsv_reserved. And free the qgroup reserved metadata space when releasing the block_rsv. To do this, we need to change the btrfs_subvolume_release_metadata() to accept btrfs_root, and record the qgroup_to_release number, and call btrfs_qgroup_convert_reserved_meta() for it. Fixes: 733e03a0 ("btrfs: qgroup: Split meta rsv type into meta_prealloc and meta_pertrans") CC: stable@vger.kernel.org # 4.19+ Reviewed-by:
-
Qu Wenruo authored
For delayed inode facility, qgroup metadata is reserved for it, and later freed. However we're freeing more bytes than we reserved. In btrfs_delayed_inode_reserve_metadata(): num_bytes = btrfs_calc_metadata_size(fs_info, 1); ... ret = btrfs_qgroup_reserve_meta_prealloc(root, fs_info->nodesize, true); ... if (!ret) { node->bytes_reserved = num_bytes; But in btrfs_delayed_inode_release_metadata(): if (qgroup_free) btrfs_qgroup_free_meta_prealloc(node->root, node->bytes_reserved); else btrfs_qgroup_convert_reserved_meta(node->root, node->bytes_reserved); This means, we're always releasing more qgroup metadata rsv than we have reserved. This won't trigger selftest warning, as btrfs qgroup metadata rsv has extra protection against cases like quota enabled half-way. But we still need to fix this problem any way. This patch will use the same num_bytes for qgroup metadata rsv so we could handle it correctly. Fixes: f218ea6c ("btrfs: delayed-inode: Remove wrong qgroup meta reservation calls") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: -
Josef Bacik authored
The following lockdep splat ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00169-g87212851a027-dirty #929 Not tainted ------------------------------------------------------ fsstress/8739 is trying to acquire lock: ffff88bfd0eb0c90 (&fs_info->reloc_mutex){+.+.}-{3:3}, at: btrfs_record_root_in_trans+0x43/0x70 but task is already holding lock: ffff88bfbd16e538 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x6a/0x4a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #10 (sb_pagefaults){.+.+}-{0:0}: __sb_start_write+0x129/0x210 btrfs_page_mkwrite+0x6a/0x4a0 do_page_mkwrite+0x4d/0xc0 handle_mm_fault+0x103c/0x1730 exc_page_fault+0x340/0x660 asm_exc_page_fault+0x1e/0x30 -> #9 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #8 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #7 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #6 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x39/0xb0 kmem_cache_create_usercopy+0x28/0x230 kmem_cache_create+0x12/0x20 bioset_init+0x15e/0x2b0 init_bio+0xa3/0xaa do_one_initcall+0x5a/0x2e0 kernel_init_freeable+0x1f4/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #5 (bio_slab_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 bioset_init+0xbc/0x2b0 __blk_alloc_queue+0x6f/0x2d0 blk_mq_init_queue_data+0x1b/0x70 loop_add+0x110/0x290 [loop] fq_codel_tcf_block+0x12/0x20 [sch_fq_codel] do_one_initcall+0x5a/0x2e0 do_init_module+0x5a/0x220 load_module+0x2459/0x26e0 __do_sys_finit_module+0xba/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (loop_ctl_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 lo_open+0x18/0x50 [loop] __blkdev_get+0xec/0x570 blkdev_get+0xe8/0x150 do_dentry_open+0x167/0x410 path_openat+0x7c9/0xa80 do_filp_open+0x93/0x100 do_sys_openat2+0x22a/0x2e0 do_sys_open+0x4b/0x80 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&bdev->bd_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 blkdev_put+0x1d/0x120 close_fs_devices.part.31+0x84/0x130 btrfs_close_devices+0x44/0xb0 close_ctree+0x296/0x2b2 generic_shutdown_super+0x69/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&fs_info->reloc_mutex){+.+.}-{3:3}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 file_update_time+0xc8/0x110 btrfs_page_mkwrite+0x10c/0x4a0 do_page_mkwrite+0x4d/0xc0 handle_mm_fault+0x103c/0x1730 exc_page_fault+0x340/0x660 asm_exc_page_fault+0x1e/0x30 other info that might help us debug this: Chain exists of: &fs_info->reloc_mutex --> &mm->mmap_lock#2 --> sb_pagefaults Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sb_pagefaults); lock(&mm->mmap_lock#2); lock(sb_pagefaults); lock(&fs_info->reloc_mutex); *** DEADLOCK *** 3 locks held by fsstress/8739: #0: ffff88bee66eeb68 (&mm->mmap_lock#2){++++}-{3:3}, at: exc_page_fault+0x173/0x660 #1: ffff88bfbd16e538 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x6a/0x4a0 #2: ffff88bfbd16e630 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x3da/0x5d0 stack backtrace: CPU: 17 PID: 8739 Comm: fsstress Kdump: loaded Not tainted 5.8.0-rc7-00169-g87212851a027-dirty #929 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 ? btrfs_get_alloc_profile+0x150/0x210 lock_acquire+0x9e/0x360 ? btrfs_record_root_in_trans+0x43/0x70 __mutex_lock+0x9f/0x930 ? btrfs_record_root_in_trans+0x43/0x70 ? lock_acquire+0x9e/0x360 ? join_transaction+0x5d/0x450 ? find_held_lock+0x2d/0x90 ? btrfs_record_root_in_trans+0x43/0x70 ? join_transaction+0x3d5/0x450 ? btrfs_record_root_in_trans+0x43/0x70 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 file_update_time+0xc8/0x110 btrfs_page_mkwrite+0x10c/0x4a0 ? handle_mm_fault+0x5e/0x1730 do_page_mkwrite+0x4d/0xc0 ? __do_fault+0x32/0x150 handle_mm_fault+0x103c/0x1730 exc_page_fault+0x340/0x660 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x7faa6c9969c4 Was seen in testing. The fix is similar to that of btrfs: open device without device_list_mutex where we're holding the device_list_mutex and then grab the bd_mutex, which pulls in a bunch of dependencies under the bd_mutex. We only ever call btrfs_close_devices() on mount failure or unmount, so we're save to not have the device_list_mutex here. We're already holding the uuid_mutex which keeps us safe from any external modification of the fs_devices. Signed-off-by: -
Josef Bacik authored
When closing and freeing the source device we could end up doing our final blkdev_put() on the bdev, which will grab the bd_mutex. As such we want to be holding as few locks as possible, so move this call outside of the dev_replace->lock_finishing_cancel_unmount lock. Since we're modifying the fs_devices we need to make sure we're holding the uuid_mutex here, so take that as well. Signed-off-by:
-
Nikolay Borisov authored
btrfs_prepare_sprout is called when the first rw device is added to a seed filesystem. This means the filesystem can't have its alloc_list be non-empty, since seed filesystems are read only. Simply remove the code altogether. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Nikolay Borisov authored
Without good understanding of how seed devices works it's hard to grok some of what the code in open_seed_devices or btrfs_prepare_sprout does. Add comments hopefully reducing some of the cognitive load. Reviewed-by:
-
Nikolay Borisov authored
While this patch touches a bunch of files the conversion is straighforward. Instead of using the implicit linked list anchored at btrfs_fs_devices::seed the code is switched to using list_for_each_entry. Previous patches in the series already factored out code that processed both main and seed devices so in those cases the factored out functions are called on the main fs_devices and then on every seed dev inside list_for_each_entry. Using list api also allows to simplify deletion from the seed dev list performed in btrfs_rm_device and btrfs_rm_dev_replace_free_srcdev by substituting a while() loop with a simple list_del_init. Reviewed-by:
-
Nikolay Borisov authored
It makes no sense to have sysfs-related routines be responsible for properly initialising the fs_info pointer of struct btrfs_fs_device. Instead this can be streamlined by making it the responsibility of btrfs_init_devices_late to initialize it. That function already initializes fs_info of every individual device in btrfs_fs_devices. As far as clearing it is concerned it makes sense to move it to close_fs_devices. That function is only called when struct btrfs_fs_devices is no longer in use - either for holding seeds or main devices for a mounted filesystem. Reviewed-by:
-
Nikolay Borisov authored
The return value of this function conveys absolutely no information. All callers already check the state of fs_devices->opened to decide how to proceed. So convert the function to returning void. While at it make btrfs_close_devices also return void. Reviewed-by:
-
Nikolay Borisov authored
This prepares the code to switching seeds devices to a proper list. Reviewed-by:
-
Nikolay Borisov authored
This is in preparation for moving fs_devices to proper lists. Reviewed-by:
-
Nikolay Borisov authored
There's no practical reason too use 'err' as a variable to convey errors. In fact it's value is either set explicitly in the beginning of the function or it simply takes the value of 'ret'. Not conforming to the usual pattern of having ret be the only variable used to convey errors makes the code more error prone to bugs. In fact one such bug was introduced by 6bf9e4bd ("btrfs: inode: Verify inode mode toi avoid NULL pointer dereference") by assigning the error value to 'ret' and not 'err'. Let's fix that issue and make the function less tricky by leaving only ret to convey error values. Signed-off-by:
-
Josef Bacik authored
iomap dio will run generic_write_sync() for us if the iocb is DSYNC. This is problematic for us because of 2 reasons: 1. we hold the inode_lock() during this operation, and we take it in generic_write_sync() 2. we hold a read lock on the dio_sem but take the write lock in fsync Since we don't want to rip out this code right now, but reworking the locking is a bit much to do at this point, work around this problem with this masterpiece of a patch. First, we clear DSYNC on the iocb so that the iomap stuff doesn't know that it needs to handle the sync. We save this fact in current->journal_info, because we need to see do special things once we're in iomap_begin, and we have no way to pass private information into iomap_dio_rw(). Next we specify a separate iomap_dio_ops for sync, which implements an ->end_io() callback that gets called when the dio completes. This is important for AIO, because we really do need to run generic_write_sync() if we complete asynchronously. However if we're still in the submitting context when we enter ->end_io() we clear the flag so that the submitter knows they're the ones that needs to run generic_write_sync(). This is meant to be temporary. We need to work out how to eliminate the inode_lock() and the dio_sem in our fsync and use another mechanism to protect these operations. Tested-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
-
Goldwyn Rodrigues authored
We're using direct io implementation based on buffer heads. This patch switches to the new iomap infrastructure. Switch from __blockdev_direct_IO() to iomap_dio_rw(). Rename btrfs_get_blocks_direct() to btrfs_dio_iomap_begin() and use it as iomap_begin() for iomap direct I/O functions. This function allocates and locks all the blocks required for the I/O. btrfs_submit_direct() is used as the submit_io() hook for direct I/O ops. Since we need direct I/O reads to go through iomap_dio_rw(), we change file_operations.read_iter() to a btrfs_file_read_iter() which calls btrfs_direct_IO() for direct reads and falls back to generic_file_buffered_read() for incomplete reads and buffered reads. We don't need address_space.direct_IO() anymore: set it to noop. Similarly, we don't need flags used in __blockdev_direct_IO(). iomap is capable of direct I/O reads from a hole, so we don't need to return -ENOENT. Btrfs direct I/O is now done under i_rwsem, shared in case of reads and exclusive in case of writes. This guards against simultaneous truncates. Use iomap->iomap_end() to check for failed or incomplete direct I/O: - for writes, call __endio_write_update_ordered() - for reads, unlock extents btrfs_dio_data is now hooked in iomap->private and not current->journal_info. It carries the reservation variable and the amount of data submitted, so we can calculate the amount of data to call __endio_write_update_ordered in case of an error. This patch removes last use of struct buffer_head from btrfs. Reviewed-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by:
-
Qu Wenruo authored
Commit 1c11b63e ("btrfs: replace pending/pinned chunks lists with io tree") introduced btrfs_device::alloc_state extent io tree, but it doesn't initialize the fs_info and owner member. This means the following features are not properly supported: - Fs owner report for insert_state() error Without fs_info initialized, although btrfs_err() won't panic, it won't output which fs is causing the error. - Wrong owner for trace events alloc_state will get the owner as pinned extents. Fix this by assiging proper fs_info and owner for btrfs_device::alloc_state. Fixes: 1c11b63e ("btrfs: replace pending/pinned chunks lists with io tree") Reviewed-by:
-
Marcos Paulo de Souza authored
Since it's inclusion on 9afc6649 ("btrfs: block-group: refactor how we read one block group item") this function always returned 0, so there is no need to check for the returned value. Reviewed-by:
Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by:
-
Leon Romanovsky authored
The compilation with W=1 generates the following warnings: fs/btrfs/sysfs.c:1630:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] 1630 | int ret; | ^~~ fs/btrfs/sysfs.c:1629:6: warning: variable 'features' set but not used [-Wunused-but-set-variable] 1629 | u64 features; | ^~~~~~~~ [ The unused variables are leftover from e410e34f ("Revert "btrfs: synchronize incompat feature bits with sysfs files""), which needs to be properly fixed by moving feature bit manipulation from the sysfs context. Silence the warning to save pepople time, we got several reports. ] Signed-off-by:Leon Romanovsky <leonro@nvidia.com> Reviewed-by:
-
Filipe Manana authored
Currently regardless of a full or a fast fsync we always wait for ordered extents to complete, and then start logging the inode after that. However for fast fsyncs we can just wait for the writeback to complete, we don't need to wait for the ordered extents to complete since we use the list of modified extents maps to figure out which extents we must log and we can get their checksums directly from the ordered extents that are still in flight, otherwise look them up from the checksums tree. Until commit b5e6c3e1 ("btrfs: always wait on ordered extents at fsync time"), for fast fsyncs, we used to start logging without even waiting for the writeback to complete first, we would wait for it to complete after logging, while holding a transaction open, which lead to performance issues when using cgroups and probably for other cases too, as wait for IO while holding a transaction handle should be avoided as much as possible. After that, for fast fsyncs, we started to wait for ordered extents to complete before starting to log, which adds some latency to fsyncs and we even got at least one report about a performance drop which bisected to that particular change: https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/ This change makes fast fsyncs only wait for writeback to finish before starting to log the inode, instead of waiting for both the writeback to finish and for the ordered extents to complete. This brings back part of the logic we had that extracts checksums from in flight ordered extents, which are not yet in the checksums tree, and making sure transaction commits wait for the completion of ordered extents previously logged (by far most of the time they have already completed by the time a transaction commit starts, resulting in no wait at all), to avoid any data loss if an ordered extent completes after the transaction used to log an inode is committed, followed by a power failure. When there are no other tasks accessing the checksums and the subvolume btrees, the ordered extent completion is pretty fast, typically taking 100 to 200 microseconds only in my observations. However when there are other tasks accessing these btrees, ordered extent completion can take a lot more time due to lock contention on nodes and leaves of these btrees. I've seen cases over 2 milliseconds, which starts to be significant. In particular when we do have concurrent fsyncs against different files there is a lot of contention on the checksums btree, since we have many tasks writing the checksums into the btree and other tasks that already started the logging phase are doing lookups for checksums in the btree. This change also turns all ranged fsyncs into full ranged fsyncs, which is something we already did when not using the NO_HOLES features or when doing a full fsync. This is to guarantee we never miss checksums due to writeback having been triggered only for a part of an extent, and we end up logging the full extent but only checksums for the written range, which results in missing checksums after log replay. Allowing ranged fsyncs to operate again only in the original range, when using the NO_HOLES feature and doing a fast fsync is doable but requires some non trivial changes to the writeback path, which can always be worked on later if needed, but I don't think they are a very common use case. Several tests were performed using fio for different numbers of concurrent jobs, each writing and fsyncing its own file, for both sequential and random file writes. The tests were run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). The following script that calls fio was used: $ cat test-fsync.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-d single -m single" if [ $# -ne 5 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 WRITE_MODE=$5 if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'" exit 1 fi cat <<EOF > /tmp/fio-job.ini [writers] rw=$WRITE_MODE fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The results were the following: ************************* *** sequential writes *** ************************* ==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec After patch: WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec (+9.8%, -8.8% runtime) ==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec After patch: WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec (+21.5% throughput, -17.8% runtime) ==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec After patch: WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec (+28.7% throughput, -22.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec After patch: WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec (+35.6% throughput, -25.2% runtime) ==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec After patch: WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec (+34.1% throughput, -25.6% runtime) ==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec After patch: WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec (+19.1% throughput, -16.4% runtime) ==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec After patch: WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec (+23.1% throughput, -18.7% runtime) ************************ *** random writes *** ************************ ==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec After patch: WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec (+0.9% throughput, -1.7% runtime) ==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec After patch: WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec (+2.3% throughput, -2.0% runtime) ==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec After patch: WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec (+15.6% throughput, -13.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec After patch: WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec (+11.6% throughput, -10.7% runtime) ==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec After patch: WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec (+3.8% throughput, -3.8% runtime) ==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec After patch: WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec (+12.7% throughput, -11.2% runtime) ==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec After patch: WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec (+6.3% throughput, -6.0% runtime) Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Filipe Manana authored
Since commit d4682ba0 ("Btrfs: sync log after logging new name") we started to commit logs, and fallback to transaction commits when we failed to log the new names or commit the logs, after link and rename operations when the target inodes (or their parents) were previously logged in the current transaction. This was to avoid losing directories despite an explicit fsync on them when they are ancestors of some inode that got a new named logged, due to a link or rename operation. However that adds the cost of starting IO and waiting for it to complete, which can cause higher latencies for applications. Instead of doing that, just make sure that when we log a new name for an inode we don't mark any of its ancestors as logged, so that if any one does an fsync against any of them, without doing any other change on them, the fsync commits the log. This way we only pay the cost of a log commit (or a transaction commit if something goes wrong or a new block group was created) if the application explicitly asks to fsync any of the parent directories. Using dbench, which mixes several filesystems operations including renames, revealed some significant latency gains. The following script that uses dbench was used to test this: #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-m single -d single" THREADS=16 echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -t 300 -D $MNT $THREADS umount $MNT The test was run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and using a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). Results before this patch: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 10750455 0.011 155.088 Close 7896674 0.001 0.243 Rename 455222 2.158 1101.947 Unlink 2171189 0.067 121.638 Deltree 256 2.425 7.816 Mkdir 128 0.002 0.003 Qpathinfo 9744323 0.006 21.370 Qfileinfo 1707092 0.001 0.146 Qfsinfo 1786756 0.001 11.228 Sfileinfo 875612 0.003 21.263 Find 3767281 0.025 9.617 WriteX 5356924 0.011 211.390 ReadX 16852694 0.003 9.442 LockX 35008 0.002 0.119 UnlockX 35008 0.001 0.138 Flush 753458 4.252 1102.249 Throughput 1128.35 MB/sec 16 clients 16 procs max_latency=1102.255 ms Results after this patch: 16 clients, after Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 11471098 0.012 448.281 Close 8426396 0.001 0.925 Rename 485746 0.123 267.183 Unlink 2316477 0.080 63.433 Deltree 288 2.830 11.144 Mkdir 144 0.003 0.010 Qpathinfo 10397420 0.006 10.288 Qfileinfo 1822039 0.001 0.169 Qfsinfo 1906497 0.002 14.039 Sfileinfo 934433 0.004 2.438 Find 4019879 0.026 10.200 WriteX 5718932 0.011 200.985 ReadX 17981671 0.003 10.036 LockX 37352 0.002 0.076 UnlockX 37352 0.001 0.109 Flush 804018 5.015 778.033 Throughput 1201.98 MB/sec 16 clients 16 procs max_latency=778.036 ms (+6.5% throughput, -29.4% max latency, -75.8% rename latency) Test case generic/498 from fstests tests the scenario that the previously mentioned commit fixed. Signed-off-by:
-
Filipe Manana authored
During a rename we pin the log to make sure no one commits a log that reflects an ongoing rename operation, as it might result in a committed log where it recorded the unlink of the old name without having recorded the new name. However we are taking the subvolume's log_mutex before incrementing the log_writers counter, which is not necessary since that counter is atomic and we only remove the old name from the log and add the new name to the log after we have incremented log_writers, ensuring that no one can commit the log after we have removed the old name from the log and before we added the new name to the log. By taking the log_mutex lock we are just adding unnecessary contention on the lock, which can become visible for workloads that mix renames with fsyncs, writes for files opened with O_SYNC and unlink operations (if the inode or its parent were fsynced before in the current transaction). So just remove the lock and unlock of the subvolume's log_mutex at btrfs_pin_log_trans(). Using dbench, which mixes different types of operations that end up taking that mutex (fsyncs, renames, unlinks and writes into files opened with O_SYNC) revealed some small gains. The following script that calls dbench was used: #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-m single -d single" THREADS=32 echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -s -t 600 -D $MNT $THREADS umount $MNT The test was run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and using a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). Results before this patch: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 4410848 0.017 738.640 Close 3240222 0.001 0.834 Rename 186850 7.478 1272.476 Unlink 890875 0.128 785.018 Deltree 128 2.846 12.081 Mkdir 64 0.002 0.003 Qpathinfo 3997659 0.009 11.171 Qfileinfo 701307 0.001 0.478 Qfsinfo 733494 0.002 1.103 Sfileinfo 359362 0.004 3.266 Find 1546226 0.041 4.128 WriteX 2202803 7.905 1376.989 ReadX 6917775 0.003 3.887 LockX 14392 0.002 0.043 UnlockX 14392 0.001 0.085 Flush 309225 0.128 1033.936 Throughput 231.555 MB/sec (sync open) 32 clients 32 procs max_latency=1376.993 ms Results after this patch: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 4603244 0.017 232.776 Close 3381299 0.001 1.041 Rename 194871 7.251 1073.165 Unlink 929730 0.133 119.233 Deltree 128 2.871 10.199 Mkdir 64 0.002 0.004 Qpathinfo 4171343 0.009 11.317 Qfileinfo 731227 0.001 1.635 Qfsinfo 765079 0.002 3.568 Sfileinfo 374881 0.004 1.220 Find 1612964 0.041 4.675 WriteX 2296720 7.569 1178.204 ReadX 7213633 0.003 3.075 LockX 14976 0.002 0.076 UnlockX 14976 0.001 0.061 Flush 322635 0.102 579.505 Throughput 241.4 MB/sec (sync open) 32 clients 32 procs max_latency=1178.207 ms (+4.3% throughput, -14.4% max latency) Reviewed-by:
-
David Sterba authored
There's a custom callback passed to btrfs_compare_trees which happens to be named exactly same as the existing function implementing it. This is confusing and the indirection is not necessary for our needs. Compiler is clever enough to call it directly so there's effectively no change. Reviewed-by:
-
David Sterba authored
There's already defined _rs within ctree.h:btrfs_printk_ratelimited, local variables should not use _ to avoid such name clashes with macro-local variables. Reviewed-by:
-
David Sterba authored
In btrfs_orphan_cleanup, there's another instance of fs_info, but it's the same as the one we already have. In btrfs_backref_finish_upper_links, rb_node is same type and used as temporary cursor to the tree. Reviewed-by:
-
David Sterba authored
The declarations of compression algorithm callbacks are defined in the .c file as they're used from there. Compiler warns that there are no declarations for public functions when compiling lzo.c/zlib.c/zstd.c. Fix that by moving the declarations to the header as it's the common place for all of them. Reviewed-by:
-
David Sterba authored
The function btrfs_feature_set_name returns a const char pointer, the second const is not necessary and reported as a warning: In file included from fs/btrfs/space-info.c:6: fs/btrfs/sysfs.h:16:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] 16 | const char * const btrfs_feature_set_name(enum btrfs_feature_set set); | ^~~~~ Reviewed-by: -
Qu Wenruo authored
We're just doing rounding up to sectorsize to calculate the lockend. There is no need to do the unnecessary length calculation, just direct round_up() is enough. Reviewed-by:
-
Josef Bacik authored
Dave reported an issue where generic/102 would sometimes hang. This turned out to be because we'd get into this spot where we were no longer making progress on data reservations because our exit condition was not met. The log is basically while (!space_info->full && !list_empty(&space_info->tickets)) flush_space(space_info, flush_state); where flush state is our various flush states, but doesn't include ALLOC_CHUNK_FORCE. This is because we actually lead with allocating chunks, and so the assumption was that once you got to the actual flushing states you could no longer allocate chunks. This was a stupid assumption, because you could have deleted block groups that would be reclaimed by a transaction commit, thus unsetting space_info->full. This is essentially what happens with generic/102, and so sometimes you'd get stuck in the flushing loop because we weren't allocating chunks, but flushing space wasn't giving us what we needed to make progress. Fix this by adding ALLOC_CHUNK_FORCE to the end of our flushing states, that way we will eventually bail out because we did end up with space_info->full if we free'd a chunk previously. Otherwise, as is the case for this test, we'll allocate our chunk and continue on our happy merry way. Reported-by:
-
Josef Bacik authored
The data flushing steps are not obvious to people other than myself and Chris. Write a giant comment explaining the reasoning behind each flush step for data as well as why it is in that particular order. Reviewed-by:
-
Josef Bacik authored
Now that we have the data ticketing stuff in place, move normal data reservations to use an async reclaim helper to satisfy tickets. Before we could have multiple tasks race in and both allocate chunks, resulting in more data chunks than we would necessarily need. Serializing these allocations and making a single thread responsible for flushing will only allocate chunks as needed, as well as cut down on transaction commits and other flush related activities. Priority reservations will still work as they have before, simply trying to allocate a chunk until they can make their reservation. Reviewed-by:
-
Josef Bacik authored
We can end up with freed extents in the delayed refs, and thus may_commit_transaction() may not think we have enough pinned space to commit the transaction and we'll ENOSPC early. Handle this by running the delayed refs in order to make sure pinned is uptodate before we try to commit the transaction. Tested-by:
-
Josef Bacik authored
Before we were waiting on iputs after we committed the transaction, but this doesn't really make much sense. We want to reclaim any space we may have in order to be more likely to commit the transaction, due to pinned space being added by running the delayed iputs. Fix this by making delayed iputs run before committing the transaction. Reviewed-by:
-
Josef Bacik authored
We used to unconditionally commit the transaction at least 2 times and then on the 3rd try check against pinned space to make sure committing the transaction was worth the effort. This is overkill, we know nobody is going to steal our reservation, and if we can't make our reservation with the pinned amount simply bail out. This also cleans up the passing of bytes_needed to may_commit_transaction, as that was the thing we added into place in order to accomplish this behavior. We no longer need it so remove that mess. Reviewed-by:
-
Josef Bacik authored
This was an old wart left over from how we previously did data reservations. Before we could have people race in and take a reservation while we were flushing space, so we needed to make sure we looped a few times before giving up. Now that we're using the ticketing infrastructure we don't have to worry about this and can drop the logic altogether. Reviewed-by:
-
Josef Bacik authored
Now that data reservations follow the same pattern as metadata reservations we can simply rename __reserve_metadata_bytes to __reserve_bytes and use that helper for data reservations. Things to keep in mind, btrfs_can_overcommit() returns 0 for data, because we can never overcommit. We also will never pass in FLUSH_ALL for data, so we'll simply be added to the priority list and go straight into handle_reserve_ticket. Reviewed-by:
-
