- 31 May, 2019 40 commits
-
-
Bart Van Assche authored
[ Upstream commit 300ec741 ] Since fc_remote_port_delete() must be called with interrupts enabled, do not disable interrupts when calling that function. Remove the lockin calls from around the put_sess() call. This is safe because the function that is called when the final reference is dropped, qlt_unreg_sess(), grabs the proper locks. This patch avoids that lockdep reports the following: WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected kworker/2:1/62 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: 0000000009e679b3 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0 and this task is already holding: 00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst] which would create a new lock dependency: (&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.} but this new dependency connects a HARDIRQ-irq-safe lock: (&(&ha->tgt.sess_lock)->rlock){-...} ... which became HARDIRQ-irq-safe at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst] qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x2a8/0x320 secondary_startup_64+0xa4/0xb0 to a HARDIRQ-irq-unsafe lock: (&(&k->k_lock)->rlock){+.+.} ... which became HARDIRQ-irq-unsafe at: ... lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7e1/0xb50 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&k->k_lock)->rlock); local_irq_disable(); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&k->k_lock)->rlock); <Interrupt> lock(&(&ha->tgt.sess_lock)->rlock); *** DEADLOCK *** 3 locks held by kworker/2:1/62: #0: 00000000a4319c16 ((wq_completion)"qla2xxx_wq"){+.+.}, at: process_one_work+0x437/0xa80 #1: 00000000ffa34c42 ((work_completion)(&sess->del_work)){+.+.}, at: process_one_work+0x437/0xa80 #2: 00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst] the dependencies between HARDIRQ-irq-safe lock and the holding lock: -> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 8 { IN-HARDIRQ-W at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst] qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x2a8/0x320 secondary_startup_64+0xa4/0xb0 INITIAL USE at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst] qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x2a8/0x320 secondary_startup_64+0xa4/0xb0 } ... key at: [<ffffffffa0c0d080>] __key.85462+0x0/0xfffffffffff7df80 [qla2xxx_scst] ... acquired at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst] qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst] qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst] process_one_work+0x511/0xa80 worker_thread+0x67/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x3a/0x50 the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock: -> (&(&k->k_lock)->rlock){+.+.} ops: 13831 { HARDIRQ-ON-W at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7e1/0xb50 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 SOFTIRQ-ON-W at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7e1/0xb50 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 INITIAL USE at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7e1/0xb50 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 } ... key at: [<ffffffff83ed8780>] __key.15491+0x0/0x40 ... acquired at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst] qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst] qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst] process_one_work+0x511/0xa80 worker_thread+0x67/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x3a/0x50 stack backtrace: CPU: 2 PID: 62 Comm: kworker/2:1 Tainted: G O 5.0.7-dbg+ #8 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: qla2xxx_wq qla24xx_delete_sess_fn [qla2xxx_scst] Call Trace: dump_stack+0x86/0xca check_usage.cold.52+0x473/0x563 __lock_acquire+0x11c0/0x23e0 lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst] qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst] qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst] process_one_work+0x511/0xa80 worker_thread+0x67/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x3a/0x50 Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Acked-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Bart Van Assche authored
[ Upstream commit d4023db7 ] This patch avoids that lockdep reports the following warning: ===================================================== WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected 5.1.0-rc1-dbg+ #11 Tainted: G W ----------------------------------------------------- rmdir/1478 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: 00000000e7ac4607 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0 and this task is already holding: 00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx] which would create a new lock dependency: (&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.} but this new dependency connects a HARDIRQ-irq-safe lock: (&(&ha->tgt.sess_lock)->rlock){-...} ... which became HARDIRQ-irq-safe at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx] qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx] qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x24d/0x2d0 secondary_startup_64+0xa4/0xb0 to a HARDIRQ-irq-unsafe lock: (&(&k->k_lock)->rlock){+.+.} ... which became HARDIRQ-irq-unsafe at: ... lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&k->k_lock)->rlock); local_irq_disable(); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&k->k_lock)->rlock); <Interrupt> lock(&(&ha->tgt.sess_lock)->rlock); *** DEADLOCK *** 4 locks held by rmdir/1478: #0: 000000002c7f1ba4 (sb_writers#10){.+.+}, at: mnt_want_write+0x32/0x70 #1: 00000000c85eb147 (&default_group_class[depth - 1]#2/1){+.+.}, at: do_rmdir+0x217/0x2d0 #2: 000000002b164d6f (&sb->s_type->i_mutex_key#13){++++}, at: vfs_rmdir+0x7e/0x1d0 #3: 00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx] the dependencies between HARDIRQ-irq-safe lock and the holding lock: -> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 127 { IN-HARDIRQ-W at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx] qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx] qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx] qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx] __handle_irq_event_percpu+0x79/0x3c0 handle_irq_event_percpu+0x70/0xf0 handle_irq_event+0x5a/0x8b handle_edge_irq+0x12c/0x310 handle_irq+0x192/0x20a do_IRQ+0x73/0x160 ret_from_intr+0x0/0x1d default_idle+0x23/0x1f0 arch_cpu_idle+0x15/0x20 default_idle_call+0x35/0x40 do_idle+0x2bb/0x2e0 cpu_startup_entry+0x1d/0x20 start_secondary+0x24d/0x2d0 secondary_startup_64+0xa4/0xb0 INITIAL USE at: lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 qla2x00_loop_resync+0xb3d/0x2690 [qla2xxx] qla2x00_do_dpc+0xcee/0xf30 [qla2xxx] kthread+0x1d2/0x1f0 ret_from_fork+0x3a/0x50 } ... key at: [<ffffffffa125f700>] __key.62804+0x0/0xfffffffffff7e900 [qla2xxx] ... acquired at: __lock_acquire+0x11ed/0x1b60 lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx] qlt_unreg_sess+0x104/0x2c0 [qla2xxx] tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx] target_shutdown_sessions+0x17b/0x190 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9f/0x120 [configfs] config_item_put+0x29/0x2b [configfs] configfs_rmdir+0x3d2/0x520 [configfs] vfs_rmdir+0xb3/0x1d0 do_rmdir+0x25c/0x2d0 __x64_sys_rmdir+0x24/0x30 do_syscall_64+0x77/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe the dependencies between the lock to be acquired and HARDIRQ-irq-unsafe lock: -> (&(&k->k_lock)->rlock){+.+.} ops: 14568 { HARDIRQ-ON-W at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 SOFTIRQ-ON-W at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 INITIAL USE at: lock_acquire+0xe3/0x200 _raw_spin_lock+0x32/0x50 klist_add_tail+0x33/0xb0 device_add+0x7f4/0xb60 device_create_groups_vargs+0x11c/0x150 device_create_with_groups+0x89/0xb0 vtconsole_class_init+0xb2/0x124 do_one_initcall+0xc5/0x3ce kernel_init_freeable+0x295/0x32e kernel_init+0x11/0x11b ret_from_fork+0x3a/0x50 } ... key at: [<ffffffff83f3d900>] __key.15805+0x0/0x40 ... acquired at: __lock_acquire+0x11ed/0x1b60 lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx] qlt_unreg_sess+0x104/0x2c0 [qla2xxx] tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx] target_shutdown_sessions+0x17b/0x190 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9f/0x120 [configfs] config_item_put+0x29/0x2b [configfs] configfs_rmdir+0x3d2/0x520 [configfs] vfs_rmdir+0xb3/0x1d0 do_rmdir+0x25c/0x2d0 __x64_sys_rmdir+0x24/0x30 do_syscall_64+0x77/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe stack backtrace: CPU: 7 PID: 1478 Comm: rmdir Tainted: G W 5.1.0-rc1-dbg+ #11 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x86/0xca check_usage.cold.59+0x473/0x563 check_prev_add.constprop.43+0x1f1/0x1170 __lock_acquire+0x11ed/0x1b60 lock_acquire+0xe3/0x200 _raw_spin_lock_irqsave+0x3d/0x60 klist_next+0x43/0x1d0 device_for_each_child+0x96/0x110 scsi_target_block+0x3c/0x40 [scsi_mod] fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc] qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx] qlt_unreg_sess+0x104/0x2c0 [qla2xxx] tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx] target_shutdown_sessions+0x17b/0x190 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9f/0x120 [configfs] config_item_put+0x29/0x2b [configfs] configfs_rmdir+0x3d2/0x520 [configfs] vfs_rmdir+0xb3/0x1d0 do_rmdir+0x25c/0x2d0 __x64_sys_rmdir+0x24/0x30 do_syscall_64+0x77/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit e209783d ] Implementations of the .write_pending() callback functions must guarantee that an appropriate LIO core callback function will be called immediately or at a later time. Make sure that this guarantee is met for aborted SCSI commands. [mkp: typo] Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: 694833ee ("scsi: tcm_qla2xxx: Do not allow aborted cmd to advance.") # v4.13. Fixes: a07100e0 ("qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM") # v4.5. Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit 24afabdb ] Make sure that the allocated interrupts are freed if allocating memory for the msix_entries array fails. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Viresh Kumar authored
[ Upstream commit 4ebe36c9 ] Currently the error return path from kobject_init_and_add() is not followed by a call to kobject_put() - which means we are leaking the kobject. Fix it by adding a call to kobject_put() in the error path of kobject_init_and_add(). Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by:
Tobin C. Harding <tobin@kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Nicholas Piggin authored
[ Upstream commit 7ae3f6e1 ] Using a jiffies timer creates a dependency on the tick_do_timer_cpu incrementing jiffies. If that CPU has locked up and jiffies is not incrementing, the watchdog heartbeat timer for all CPUs stops and creates false positives and confusing warnings on local CPUs, and also causes the SMP detector to stop, so the root cause is never detected. Fix this by using hrtimer based timers for the watchdog heartbeat, like the generic kernel hardlockup detector. Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reported-by:
Ravikumar Bangoria <ravi.bangoria@in.ibm.com> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Tested-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reported-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Nadav Amit authored
[ Upstream commit 3c0dab44 ] Since alloc_module() will not set the pages as executable soon, set ftrace trampoline pages as executable after they are allocated. For the time being, do not change ftrace to use the text_poke() interface. As a result, ftrace still breaks W^X. Signed-off-by:
Nadav Amit <namit@vmware.com> Signed-off-by:
Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: <akpm@linux-foundation.org> Cc: <ard.biesheuvel@linaro.org> Cc: <deneen.t.dock@intel.com> Cc: <kernel-hardening@lists.openwall.com> Cc: <kristen@linux.intel.com> Cc: <linux_dti@icloud.com> Cc: <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190426001143.4983-10-namit@vmware.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit 89a37842 ] Remove mt76_queue dependency from tx_queue_skb function pointer and rely on mt76_tx_qid instead. This is a preliminary patch to introduce mt76_sw_queue support Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 74dd022f ] When building with -Wunused-but-set-variable, the compiler shouts about a number of pte_unmap() users, since this expands to an empty macro on arm64: | mm/gup.c: In function 'gup_pte_range': | mm/gup.c:1727:16: warning: variable 'ptem' set but not used | [-Wunused-but-set-variable] | mm/gup.c: At top level: | mm/memory.c: In function 'copy_pte_range': | mm/memory.c:821:24: warning: variable 'orig_dst_pte' set but not used | [-Wunused-but-set-variable] | mm/memory.c:821:9: warning: variable 'orig_src_pte' set but not used | [-Wunused-but-set-variable] | mm/swap_state.c: In function 'swap_ra_info': | mm/swap_state.c:641:15: warning: variable 'orig_pte' set but not used | [-Wunused-but-set-variable] | mm/madvise.c: In function 'madvise_free_pte_range': | mm/madvise.c:318:9: warning: variable 'orig_pte' set but not used | [-Wunused-but-set-variable] Rewrite pte_unmap() as a static inline function, which silences the warnings. Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 1f5b62f0 ] The VDSO code uses the kernel helper that was originally designed to abstract the access between 32 and 64bit systems. It worked so far because this function is declared as 'inline'. As we're about to revamp that part of the code, the VDSO would break. Let's fix it by doing what should have been done from the start, a proper system register access. Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Fabien Dessenne authored
[ Upstream commit b5b5a27b ] During probe, return the provided errors value instead of -ENODEV. This allows the driver to be deferred probed if needed. Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Acked-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Jon Derrick authored
[ Upstream commit f10b83de ] If the BAR is zero size, it indicates it was never successfully mapped. Ensure that the BAR is valid during initialization before attempting to use it. Signed-off-by:
Jon Derrick <jonathan.derrick@intel.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Pierre-Louis Bossart authored
[ Upstream commit 23583f77 ] When the DSDT tables expose devices with subdevices and a set of hierarchical _DSD properties, the data returned by acpi_get_next_subnode() is incorrect, with the results suggesting a bad pointer assignment. The parser works fine with device_nodes or data_nodes, but not with a combination of the two. The problem is traced to an invalid pointer used when jumping from handling device_nodes to data nodes. The existing code looks for data nodes below the last subdevice found instead of the common root. Fix by forcing the acpi_device pointer to be derived from the same fwnode for the two types of subnodes. This same problem of handling device and data nodes was already fixed in a similar way by 'commit bf4703fd ("ACPI / property: fix data node parsing in acpi_get_next_subnode()")' but broken later by 'commit 34055190 ("ACPI / property: Add fwnode_get_next_child_node()")', so this should probably go to linux-stable all the way to 4.12 Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit e025da3d ] If "ret_len" is negative then it could lead to a NULL dereference. The "ret_len" value comes from nl80211_vendor_cmd(), if it's negative then we don't allocate the "dcmd_buf" buffer. Then we pass "ret_len" to brcmf_fil_cmd_data_set() where it is cast to a very high u32 value. Most of the functions in that call tree check whether the buffer we pass is NULL but there are at least a couple places which don't such as brcmf_dbg_hex_dump() and brcmf_msgbuf_query_dcmd(). We memcpy() to and from the buffer so it would result in a NULL dereference. The fix is to change the types so that "ret_len" can't be negative. (If we memcpy() zero bytes to NULL, that's a no-op and doesn't cause an issue). Fixes: 1bacb048 ("brcmfmac: replace cfg80211 testmode with vendor command") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Bodong Wang authored
[ Upstream commit 6f4e0219 ] When the state of rep was introduced, it was also designed to prevent duplicate unloading of the same rep. Considering the following two flows when an eswitch manager is at switchdev mode with n VF reps loaded. +--------------------------------------+--------------------------------+ | cpu-0 | cpu-1 | | -------- | -------- | | mlx5_ib_remove | mlx5_eswitch_disable_sriov | | mlx5_ib_unregister_vport_reps | esw_offloads_cleanup | | mlx5_eswitch_unregister_vport_reps | esw_offloads_unload_all_reps | | __unload_reps_all_vport | __unload_reps_all_vport | +--------------------------------------+--------------------------------+ These two flows will try to unload the same rep. Per original design, once one flow unloads the rep, the state moves to REGISTERED. The 2nd flow will no longer needs to do the unload and bails out. However, as read and write of the state is not atomic, when 1st flow is doing the unload, the state is still LOADED, 2nd flow is able to do the same unload action. Kernel crash will happen. To solve this, driver should do atomic test-and-set for the state. So that only one flow can change the rep state from LOADED to REGISTERED, and proceed to do the actual unloading. Since the state is changing to atomic type, all other read/write should be atomic action as well. Fixes: f121e0ea (net/mlx5: E-Switch, Add state to eswitch vport representors) Signed-off-by:
Bodong Wang <bodong@mellanox.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Vu Pham <vuhuong@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Flavio Suligoi authored
[ Upstream commit 29f21337 ] Calculate the divisor for the SCR (Serial Clock Rate), avoiding that the SSP transmission rate can be greater than the device rate. When the division between the SSP clock and the device rate generates a reminder, we have to increment by one the divisor. In this way the resulting SSP clock will never be greater than the device SPI max frequency. For example, with: - ssp_clk = 50 MHz - dev freq = 15 MHz without this patch the SSP clock will be greater than 15 MHz: - 25 MHz for PXA25x_SSP and CE4100_SSP - 16,56 MHz for the others Instead, with this patch, we have in both case an SSP clock of 12.5MHz, so the max rate of the SPI device clock is respected. Signed-off-by:
Flavio Suligoi <f.suligoi@asem.it> Reviewed-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit ea751227 ] During randconfig builds, I occasionally run into an invalid configuration of the freescale FIQ sound support: WARNING: unmet direct dependencies detected for SND_SOC_IMX_PCM_FIQ Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m] Selected by [y]: - SND_SOC_FSL_SPDIF [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m]!=n && (MXC_TZIC [=n] || MXC_AVIC [=y]) sound/soc/fsl/imx-ssi.o: In function `imx_ssi_remove': imx-ssi.c:(.text+0x28): undefined reference to `imx_pcm_fiq_exit' sound/soc/fsl/imx-ssi.o: In function `imx_ssi_probe': imx-ssi.c:(.text+0xa64): undefined reference to `imx_pcm_fiq_init' The Kconfig warning is a result of the symbol being defined inside of the "if SND_IMX_SOC" block, and is otherwise harmless. The link error is more tricky and happens with SND_SOC_IMX_SSI=y, which may or may not imply FIQ support. However, if SND_SOC_FSL_SSI is set to =m at the same time, that selects SND_SOC_IMX_PCM_FIQ as a loadable module dependency, which then causes a link failure from imx-ssi. The solution here is to make SND_SOC_IMX_PCM_FIQ built-in whenever one of its potential users is built-in. Fixes: ff40260f ("ASoC: fsl: refine DMA/FIQ dependencies") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Claudiu Beznea authored
[ Upstream commit e5c27498 ] atmel_qspi objects are kept in spi_controller objects, so, first get pointer to spi_controller object and then get atmel_qspi object from spi_controller object. Fixes: 2d30ac5e ("mtd: spi-nor: atmel-quadspi: Use spi-mem interface for atmel-quadspi driver") Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
-
Anju T Sudhakar authored
[ Upstream commit 860b7d22 ] The data structure (i.e struct imc_mem_info) to hold the memory address information for nest imc units is allocated based on the number of nodes in the system. nest_imc_event_init() traverse this struct array to calculate the memory base address for the event-cpu. If we fail to find a match for the event cpu's chip-id in imc_mem_info struct array, then the do-while loop will iterate until we crash. Fix this by changing the loop exit condition based on the number of non zero vbase elements in the array, since the allocation is done for nr_chips + 1. Reported-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
-
Bo YU authored
[ Upstream commit 5d085ec0 ] This is detected by Coverity scan: CID: 1440481 Signed-off-by:
Bo YU <tsu.yubo@gmail.com> Signed-off-by:
-
Anju T Sudhakar authored
[ Upstream commit a913e5e8 ] Nest hardware counter memory resides in a per-chip reserve-memory. During nest_imc_event_init(), chip-id of the event-cpu is considered to calculate the base memory addresss for that cpu. Return, proper error condition if the chip_id calculated is invalid. Reported-by:
-
Jerome Brunet authored
[ Upstream commit 30180e84 ] If the hdmi codec startup fails, it should clear the current_substream pointer to free the device. This is properly done for the audio_startup() callback but for snd_pcm_hw_constraint_eld(). Make sure the pointer cleared if an error is reported. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
-
Fei Yang authored
[ Upstream commit 73103c7f ] The following kernel panic happens due to the io_data buffer gets deallocated before the async io is completed. Add a check for the case where io_data buffer should be deallocated by ffs_user_copy_worker. [ 41.663334] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 41.672099] #PF error: [normal kernel read fault] [ 41.677356] PGD 20c974067 P4D 20c974067 PUD 20c973067 PMD 0 [ 41.683687] Oops: 0000 [#1] PREEMPT SMP [ 41.687976] CPU: 1 PID: 7 Comm: kworker/u8:0 Tainted: G U 5.0.0-quilt-2e5dc0ac-00790-gd8c79f2-dirty #2 [ 41.705309] Workqueue: adb ffs_user_copy_worker [ 41.705316] RIP: 0010:__vunmap+0x2a/0xc0 [ 41.705318] Code: 0f 1f 44 00 00 48 85 ff 0f 84 87 00 00 00 55 f7 c7 ff 0f 00 00 48 89 e5 41 55 41 89 f5 41 54 53 48 89 fb 75 71 e8 56 d7 ff ff <4c> 8b 60 48 4d 85 e4 74 76 48 89 df e8 25 ff ff ff 45 85 ed 74 46 [ 41.705320] RSP: 0018:ffffbc3a40053df0 EFLAGS: 00010286 [ 41.705322] RAX: 0000000000000000 RBX: ffffbc3a406f1000 RCX: 0000000000000000 [ 41.705323] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 00000000ffffffff [ 41.705324] RBP: ffffbc3a40053e08 R08: 000000000001fb79 R09: 0000000000000037 [ 41.705325] R10: ffffbc3a40053b68 R11: ffffbc3a40053cad R12: fffffffffffffff2 [ 41.705326] R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffffffffff [ 41.705328] FS: 0000000000000000(0000) GS:ffff9e2977a80000(0000) knlGS:0000000000000000 [ 41.705329] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.705330] CR2: 0000000000000048 CR3: 000000020c994000 CR4: 00000000003406e0 [ 41.705331] Call Trace: [ 41.705338] vfree+0x50/0xb0 [ 41.705341] ffs_user_copy_worker+0xe9/0x1c0 [ 41.705344] process_one_work+0x19f/0x3e0 [ 41.705348] worker_thread+0x3f/0x3b0 [ 41.829766] kthread+0x12b/0x150 [ 41.833371] ? process_one_work+0x3e0/0x3e0 [ 41.838045] ? kthread_create_worker_on_cpu+0x70/0x70 [ 41.843695] ret_from_fork+0x3a/0x50 [ 41.847689] Modules linked in: hci_uart bluetooth ecdh_generic rfkill_gpio dwc3_pci dwc3 snd_usb_audio mei_me tpm_crb snd_usbmidi_lib xhci_pci xhci_hcd mei tpm snd_hwdep cfg80211 snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core snd_hda_core videobuf2_dma_sg crlmodule [ 41.876880] CR2: 0000000000000048 [ 41.880584] ---[ end trace 2bc4addff0f2e673 ]--- [ 41.891346] RIP: 0010:__vunmap+0x2a/0xc0 [ 41.895734] Code: 0f 1f 44 00 00 48 85 ff 0f 84 87 00 00 00 55 f7 c7 ff 0f 00 00 48 89 e5 41 55 41 89 f5 41 54 53 48 89 fb 75 71 e8 56 d7 ff ff <4c> 8b 60 48 4d 85 e4 74 76 48 89 df e8 25 ff ff ff 45 85 ed 74 46 [ 41.916740] RSP: 0018:ffffbc3a40053df0 EFLAGS: 00010286 [ 41.922583] RAX: 0000000000000000 RBX: ffffbc3a406f1000 RCX: 0000000000000000 [ 41.930563] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 00000000ffffffff [ 41.938540] RBP: ffffbc3a40053e08 R08: 000000000001fb79 R09: 0000000000000037 [ 41.946520] R10: ffffbc3a40053b68 R11: ffffbc3a40053cad R12: fffffffffffffff2 [ 41.954502] R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffffffffff [ 41.962482] FS: 0000000000000000(0000) GS:ffff9e2977a80000(0000) knlGS:0000000000000000 [ 41.971536] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.977960] CR2: 0000000000000048 CR3: 000000020c994000 CR4: 00000000003406e0 [ 41.985930] Kernel panic - not syncing: Fatal exception [ 41.991817] Kernel Offset: 0x16000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 42.009525] Rebooting in 10 seconds.. [ 52.014376] ACPI MEMORY or I/O RESET_REG. Fixes: 772a7a72 ("usb: gadget: f_fs: Allow scatter-gather buffers") Signed-off-by:
Fei Yang <fei.yang@intel.com> Reviewed-by:
Manu Gautam <mgautam@codeaurora.org> Tested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 41a91c60 ] dwc3_gadget_suspend() is called under dwc->lock spinlock. In such context calling synchronize_irq() is not allowed. Move the problematic call out of the protected block to fix the following kernel BUG during system suspend: BUG: sleeping function called from invalid context at kernel/irq/manage.c:112 in_atomic(): 1, irqs_disabled(): 128, pid: 1601, name: rtcwake 6 locks held by rtcwake/1601: #0: f70ac2a2 (sb_writers#7){.+.+}, at: vfs_write+0x130/0x16c #1: b5fe1270 (&of->mutex){+.+.}, at: kernfs_fop_write+0xc0/0x1e4 #2: 7e597705 (kn->count#60){.+.+}, at: kernfs_fop_write+0xc8/0x1e4 #3: 8b3527d0 (system_transition_mutex){+.+.}, at: pm_suspend+0xc4/0xc04 #4: fc7f1c42 (&dev->mutex){....}, at: __device_suspend+0xd8/0x74c #5: 4b36507e (&(&dwc->lock)->rlock){....}, at: dwc3_gadget_suspend+0x24/0x3c irq event stamp: 11252 hardirqs last enabled at (11251): [<c09c54a4>] _raw_spin_unlock_irqrestore+0x6c/0x74 hardirqs last disabled at (11252): [<c09c4d44>] _raw_spin_lock_irqsave+0x1c/0x5c softirqs last enabled at (9744): [<c0102564>] __do_softirq+0x3a4/0x66c softirqs last disabled at (9737): [<c0128528>] irq_exit+0x140/0x168 Preemption disabled at: [<00000000>] (null) CPU: 7 PID: 1601 Comm: rtcwake Not tainted 5.0.0-rc3-next-20190122-00039-ga3f4ee4f8a52 #5252 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c01110f0>] (unwind_backtrace) from [<c010d120>] (show_stack+0x10/0x14) [<c010d120>] (show_stack) from [<c09a4d04>] (dump_stack+0x90/0xc8) [<c09a4d04>] (dump_stack) from [<c014c700>] (___might_sleep+0x22c/0x2c8) [<c014c700>] (___might_sleep) from [<c0189d68>] (synchronize_irq+0x28/0x84) [<c0189d68>] (synchronize_irq) from [<c05cbbf8>] (dwc3_gadget_suspend+0x34/0x3c) [<c05cbbf8>] (dwc3_gadget_suspend) from [<c05bd020>] (dwc3_suspend_common+0x154/0x410) [<c05bd020>] (dwc3_suspend_common) from [<c05bd34c>] (dwc3_suspend+0x14/0x2c) [<c05bd34c>] (dwc3_suspend) from [<c051c730>] (platform_pm_suspend+0x2c/0x54) [<c051c730>] (platform_pm_suspend) from [<c05285d4>] (dpm_run_callback+0xa4/0x3dc) [<c05285d4>] (dpm_run_callback) from [<c0528a40>] (__device_suspend+0x134/0x74c) [<c0528a40>] (__device_suspend) from [<c052c508>] (dpm_suspend+0x174/0x588) [<c052c508>] (dpm_suspend) from [<c0182134>] (suspend_devices_and_enter+0xc0/0xe74) [<c0182134>] (suspend_devices_and_enter) from [<c0183658>] (pm_suspend+0x770/0xc04) [<c0183658>] (pm_suspend) from [<c0180ddc>] (state_store+0x6c/0xcc) [<c0180ddc>] (state_store) from [<c09a9a70>] (kobj_attr_store+0x14/0x20) [<c09a9a70>] (kobj_attr_store) from [<c02d6800>] (sysfs_kf_write+0x4c/0x50) [<c02d6800>] (sysfs_kf_write) from [<c02d594c>] (kernfs_fop_write+0xfc/0x1e4) [<c02d594c>] (kernfs_fop_write) from [<c02593d8>] (__vfs_write+0x2c/0x160) [<c02593d8>] (__vfs_write) from [<c0259694>] (vfs_write+0xa4/0x16c) [<c0259694>] (vfs_write) from [<c0259870>] (ksys_write+0x40/0x8c) [<c0259870>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xed55ffa8 to 0xed55fff0) ... Fixes: 01c10880 ("usb: dwc3: gadget: synchronize_irq dwc irq in suspend") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Minas Harutyunyan authored
[ Upstream commit 54f37f56 ] Some function drivers queueing more than 128 ISOC requests at a time. To avoid "descriptor chain full" cases, increasing descriptors count from MAX_DMA_DESC_NUM_GENERIC to MAX_DMA_DESC_NUM_HS_ISOC for ISOC's only. Signed-off-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
-
Mac Chiang authored
[ Upstream commit 16ec5dfe ] On kbl_rt5663_max98927, commit 38a5882e ("ASoC: Intel: kbl_rt5663_max98927: Map BTN_0 to KEY_PLAYPAUSE") This key pair mapping to play/pause when playing Youtube The Android 3.5mm Headset jack specification mentions that BTN_0 should be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE, which has much broader userspace support. For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle play/pause of videos and audio, but does not handle KEY_MEDIA. Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the new USB headset spec requires KEY_PLAYPAUSE for BTN_0. https://source.android.com/devices/accessories/headset/usb-headset-spec The same fix is required on Chrome kbl_da7219_max98357a. Signed-off-by:
Mac Chiang <mac.chiang@intel.com> Reviewed-by:
Benson Leung <bleung@chromium.org> Acked-by:
-
Wen Yang authored
[ Upstream commit 02d15f0d ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/pinctrl/zte/pinctrl-zx.c:415:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:422:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:436:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:444:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:448:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jun Nie <jun.nie@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
João Paulo Rechi Vita authored
[ Upstream commit f80c5dad ] This commit makes the kernel not send the next queued HCI command until a command complete arrives for the last HCI command sent to the controller. This change avoids a problem with some buggy controllers (seen on two SKUs of QCA9377) that send an extra command complete event for the previous command after the kernel had already sent a new HCI command to the controller. The problem was reproduced when starting an active scanning procedure, where an extra command complete event arrives for the LE_SET_RANDOM_ADDR command. When this happends the kernel ends up not processing the command complete for the following commmand, LE_SET_SCAN_PARAM, and ultimately behaving as if a passive scanning procedure was being performed, when in fact controller is performing an active scanning procedure. This makes it impossible to discover BLE devices as no device found events are sent to userspace. This problem is reproducible on 100% of the attempts on the affected controllers. The extra command complete event can be seen at timestamp 27.420131 on the btmon logs bellow. Bluetooth monitor ver 5.50 = Note: Linux version 5.0.0+ (x86_64) 0.352340 = Note: Bluetooth subsystem version 2.22 0.352343 = New Index: 80:C5:F2:8F:87:84 (Primary,USB,hci0) [hci0] 0.352344 = Open Index: 80:C5:F2:8F:87:84 [hci0] 0.352345 = Index Info: 80:C5:F2:8F:87:84 (Qualcomm) [hci0] 0.352346 @ MGMT Open: bluetoothd (privileged) version 1.14 {0x0001} 0.352347 @ MGMT Open: btmon (privileged) version 1.14 {0x0002} 0.352366 @ MGMT Open: btmgmt (privileged) version 1.14 {0x0003} 27.302164 @ MGMT Command: Start Discovery (0x0023) plen 1 {0x0003} [hci0] 27.302310 Address type: 0x06 LE Public LE Random < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #1 [hci0] 27.302496 Address: 15:60:F2:91:B2:24 (Non-Resolvable) > HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 27.419117 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #3 [hci0] 27.419244 Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) > HCI Event: Command Complete (0x0e) plen 4 #4 [hci0] 27.420131 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #5 [hci0] 27.420259 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #6 [hci0] 27.420969 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) > HCI Event: Command Complete (0x0e) plen 4 #7 [hci0] 27.421983 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 4 {0x0003} [hci0] 27.422059 Start Discovery (0x0023) plen 1 Status: Success (0x00) Address type: 0x06 LE Public LE Random @ MGMT Event: Discovering (0x0013) plen 2 {0x0003} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0002} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0001} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) Signed-off-by:
João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Haiyang Zhang authored
[ Upstream commit 93aa4792 ] When the ring buffer is almost full due to RX completion messages, a TX packet may reach the "low watermark" and cause the queue stopped. If the TX completion arrives earlier than queue stopping, the wakeup may be missed. This patch moves the check for the last pending packet to cover both EAGAIN and success cases, so the queue will be reliably waked up when necessary. Reported-and-tested-by:
Stephan Klein <stephan.klein@wegfinder.at> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sameeh Jubran authored
[ Upstream commit 8ee8ee7f ] In some cases when a queue related allocation fails, successful past allocations are freed but the pointer that pointed to them is not set to NULL. This is a problem for 2 reasons: 1. This is generally a bad practice since this pointer might be accidentally accessed in the future. 2. Future allocations using the same pointer check if the pointer is NULL and fail if it is not. Fixed this by setting such pointers to NULL in the allocation of queue related objects. Also refactored the code of ena_setup_tx_resources() to goto-style error handling to avoid code duplication of resource freeing. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
-
Sameeh Jubran authored
[ Upstream commit f9133088 ] GCC 8 contains a number of new warnings as well as enhancements to existing checkers. The warning - Wstringop-truncation - warns for calls to bounded string manipulation functions such as strncat, strncpy, and stpncpy that may either truncate the copied string or leave the destination unchanged. In our case the destination string length (32 bytes) is much shorter than the source string (64 bytes) which causes this warning to show up. In general the destination has to be at least a byte larger than the length of the source string with strncpy for this warning not to showup. This can be easily fixed by using strlcpy instead which already does the truncation to the string. Documentation for this function can be found here: https://elixir.bootlin.com/linux/latest/source/lib/string.c#L141 Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
-
Sameer Pujar authored
[ Upstream commit f030e419 ] Following kernel panic is seen during DMA driver unload->load sequence ========================================================================== Unable to handle kernel paging request at virtual address ffffff8001198880 Internal error: Oops: 86000007 [#1] PREEMPT SMP CPU: 0 PID: 5907 Comm: HwBinder:4123_1 Tainted: G C 4.9.128-tegra-g065839f Hardware name: galen (DT) task: ffffffc3590d1a80 task.stack: ffffffc3d0678000 PC is at 0xffffff8001198880 LR is at of_dma_request_slave_channel+0xd8/0x1f8 pc : [<ffffff8001198880>] lr : [<ffffff8008746f30>] pstate: 60400045 sp : ffffffc3d067b710 x29: ffffffc3d067b710 x28: 000000000000002f x27: ffffff800949e000 x26: ffffff800949e750 x25: ffffff800949e000 x24: ffffffbefe817d84 x23: ffffff8009f77cb0 x22: 0000000000000028 x21: ffffffc3ffda49c8 x20: 0000000000000029 x19: 0000000000000001 x18: ffffffffffffffff x17: 0000000000000000 x16: ffffff80082b66a0 x15: ffffff8009e78250 x14: 000000000000000a x13: 0000000000000038 x12: 0101010101010101 x11: 0000000000000030 x10: 0101010101010101 x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f x7 : 62ff726b6b64622c x6 : 0000000000008064 x5 : 6400000000000000 x4 : ffffffbefe817c44 x3 : ffffffc3ffda3e08 x2 : ffffff8001198880 x1 : ffffffc3d48323c0 x0 : ffffffc3d067b788 Process HwBinder:4123_1 (pid: 5907, stack limit = 0xffffffc3d0678028) Call trace: [<ffffff8001198880>] 0xffffff8001198880 [<ffffff80087459f8>] dma_request_chan+0x50/0x1f0 [<ffffff8008745bc0>] dma_request_slave_channel+0x28/0x40 [<ffffff8001552c44>] tegra_alt_pcm_open+0x114/0x170 [<ffffff8008d65fa4>] soc_pcm_open+0x10c/0x878 [<ffffff8008d18618>] snd_pcm_open_substream+0xc0/0x170 [<ffffff8008d1878c>] snd_pcm_open+0xc4/0x240 [<ffffff8008d189e0>] snd_pcm_playback_open+0x58/0x80 [<ffffff8008cfc6d4>] snd_open+0xb4/0x178 [<ffffff8008250628>] chrdev_open+0xb8/0x1d0 [<ffffff8008246fdc>] do_dentry_open+0x214/0x318 [<ffffff80082485d0>] vfs_open+0x58/0x88 [<ffffff800825bce0>] do_last+0x450/0xde0 [<ffffff800825c718>] path_openat+0xa8/0x368 [<ffffff800825dd84>] do_filp_open+0x8c/0x110 [<ffffff8008248a74>] do_sys_open+0x164/0x220 [<ffffff80082b66dc>] compat_SyS_openat+0x3c/0x50 [<ffffff8008083040>] el0_svc_naked+0x34/0x38 ---[ end trace 67e6d544e65b5145 ]--- Kernel panic - not syncing: Fatal exception ========================================================================== In device probe(), of_dma_controller_register() registers DMA controller. But when driver is removed, this is not freed. During driver reload this results in data abort and kernel panic. Add of_dma_controller_free() in driver remove path to fix the issue. Fixes: f46b1957 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA") Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Reviewed-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Ming Lei authored
[ Upstream commit e87eb301 ] Just like aio/io_uring, we need to grab 2 refcount for queuing one request, one is for submission, another is for completion. If the request isn't queued from plug code path, the refcount grabbed in generic_make_request() serves for submission. In theroy, this refcount should have been released after the sumission(async run queue) is done. blk_freeze_queue() works with blk_sync_queue() together for avoiding race between cleanup queue and IO submission, given async run queue activities are canceled because hctx->run_work is scheduled with the refcount held, so it is fine to not hold the refcount when running the run queue work function for dispatch IO. However, if request is staggered into plug list, and finally queued from plug code path, the refcount in submission side is actually missed. And we may start to run queue after queue is removed because the queue's kobject refcount isn't guaranteed to be grabbed in flushing plug list context, then kernel oops is triggered, see the following race: blk_mq_flush_plug_list(): blk_mq_sched_insert_requests() insert requests to sw queue or scheduler queue blk_mq_run_hw_queue Because of concurrent run queue, all requests inserted above may be completed before calling the above blk_mq_run_hw_queue. Then queue can be freed during the above blk_mq_run_hw_queue(). Fixes the issue by grab .q_usage_counter before calling blk_mq_sched_insert_requests() in blk_mq_flush_plug_list(). This way is safe because the queue is absolutely alive before inserting request. Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: linux-scsi@vger.kernel.org, Cc: Martin K . Petersen <martin.petersen@oracle.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>, Reviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Ming Lei authored
[ Upstream commit 7c6c5b7c ] Split blk_mq_alloc_and_init_hctx into two parts, and one is blk_mq_alloc_hctx() for allocating all hctx resources, another is blk_mq_init_hctx() for initializing hctx, which serves as counter-part of blk_mq_exit_hctx(). Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: James Smart <james.smart@broadcom.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org Cc: Martin K . Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Tested-by:
-
Tony Nguyen authored
[ Upstream commit e80e76db ] When Tx insertion is set, we are not accounting for the state of Rx stripping. This causes Rx stripping to be enabled any time Tx insertion is changed, even when it's supposed to be disabled. Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Tony Nguyen authored
[ Upstream commit 8f529ff9 ] Set features can have multiple features turned on|off in a single call. Grouping these all in an if/else means after one condition is met, other conditions/features will not be evaluated. Break the if/else statements by feature to ensure all features will be handled properly. Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit a7d00671 ] tools/bpf/bpftool/.gitignore has the "bpftool" pattern, which is intended to ignore the following build artifact: tools/bpf/bpftool/bpftool However, the .gitignore entry is effective not only for the current directory, but also for any sub-directories. So, from the point of .gitignore grammar, the following check-in file is also considered to be ignored: tools/bpf/bpftool/bash-completion/bpftool As the manual gitignore(5) says "Files already tracked by Git are not affected", this is not a problem as far as Git is concerned. However, Git is not the only program that parses .gitignore because .gitignore is useful to distinguish build artifacts from source files. For example, tar(1) supports the --exclude-vcs-ignore option. As of writing, this option does not work perfectly, but it intends to create a tarball excluding files specified by .gitignore. So, I believe it is better to fix this issue. You can fix it by prefixing the pattern with a slash; the leading slash means the specified pattern is relative to the current directory. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Yonghong Song authored
[ Upstream commit 6cea3370 ] Test test_libbpf.sh failed on my development server with failure -bash-4.4$ sudo ./test_libbpf.sh [0] libbpf: Error in bpf_object__probe_name():Operation not permitted(1). Couldn't load basic 'r0 = 0' BPF program. test_libbpf: failed at file test_l4lb.o selftests: test_libbpf [FAILED] -bash-4.4$ The reason is because my machine has 64KB locked memory by default which is not enough for this program to get locked memory. Similar to other bpf selftests, let us increase RLIMIT_MEMLOCK to infinity, which fixed the issue. Signed-off-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
-
Björn Töpel authored
[ Upstream commit 0e6741f0 ] When unmapping the AF_XDP memory regions used for the rings, an invalid address was passed to the munmap() calls. Instead of passing the beginning of the memory region, the descriptor region was passed to munmap. When the userspace application tried to tear down an AF_XDP socket, the operation failed and the application would still have a reference to socket it wished to get rid of. Reported-by:
William Tu <u9012063@gmail.com> Fixes: 1cad0788 ("libbpf: add support for using AF_XDP sockets") Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Tested-by:
-
Martyna Szapar authored
[ Upstream commit 24474f27 ] Fixed possible memory leak in i40e_vc_add_cloud_filter function: cfilter is being allocated and in some error conditions the function returns without freeing the memory. Fix of integer truncation from u16 (type of queue_id value) to u8 when calling i40e_vc_isvalid_queue_id function. Signed-off-by:
Martyna Szapar <martyna.szapar@intel.com> Signed-off-by:
-
