We should call of_node_put() for the reference 'dsp_of_node' returned by
of_parse_phandle() which will increase the refcount.

Fixes: 9bae4880 ("ASoC: qcom: move ipq806x specific bits out of lpass driver.")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220702020109.263980-1-windhl@126.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add missing break in one of the switch statement.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: cdb09e62 ("ASoC: codecs: wsa883x: add control, dapm widgets and map")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220701125515.32332-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Currently we do not check if SoundWire slave initialization timeout
expired before continuing to access its registers.

Its possible that the registers are not accessible if timeout is
expired. Handle this by returning timeout in resume path.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 43b8c7dc ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220630130023.9308-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Currently we do not check if SoundWire slave initialization timeout
expired before continuing to access its registers.

Its possible that the registers are not accessible if timeout is
expired. Handle this by returning timeout in resume path.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 8dd55245 ("ASoC: codecs: wsa881x: add runtime pm support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220630130023.9308-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

Current ASoC has fixup both snd_soc_of_get_dai_link_cpus/codecs().
I guess cpu was copied from codec, but it is using "codec" naming everwhere
in "cpu" function. It is strange, and thus, error case will be issue
(It should call cpu function instead of codec).

This patch tidyup it, and try to cleanup.
[1/2] is for bug-fix,
[2/2] is for new feature.

extra semicolons could be deleted.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Link: https://lore.kernel.org/r/20220630020347.7148-1-kunyu@nfschina.comSigned-off-by: Mark Brown <broonie@kernel.org>

The cs_dsp core will return an error if passed a NULL cs_dsp struct so
there is no need for the wm_adsp_write|read_ctl functions to manually
check that. The cs_dsp core will also check the data is within bounds of
the control so the additional bounds check is redundant too. Simplify
things a bit by removing said code.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630101459.3442327-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

sparse reports
sound/soc/samsung/neo1973_wm8753.c:347:24: warning: symbol 'neo1973_audio' was not declared. Should it be static?

neo1973_audio is only used in neo1973_wm8753.c, so it's
storage class specifier should be static.

Fixes: e26a2abc ("ASoC: samsung: neo1973: turn into platform driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220629201811.2537853-1-trix@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add controls, dapm widgets along with route.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220630123633.8047-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Yassine Oudjana <yassine.oudjana@gmail.com>:

Add DT bindings for WCD9335 DAIs and use them in the driver as well
as all device trees currently using WCD9335.

The alsa-project documentation is now part of the kernel docs,
the original links are long dead, update links.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220628165807.152191-1-marex@denx.deSigned-off-by: Mark Brown <broonie@kernel.org>

sparse reports
sound/soc/samsung/rx1950_uda1380.c:131:18: warning: symbol 'gpiod_speaker_power' was not declared. Should it be static?
sound/soc/samsung/rx1950_uda1380.c:231:24: warning: symbol 'rx1950_audio' was not declared. Should it be static?

Both gpiod_speaker_power and rx1950_audio are only used in rx1950_uda1380.c,
so their storage class specifiers should be static.

Fixes: 83d74e35 ("ASoC: samsung: rx1950: turn into platform driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220629185345.910406-1-trix@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Get DAI indices from DT bindings and remove the currently used
local definitions.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220622161322.168017-3-y.oudjana@protonmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add bindings for the DAIs available in WCD9335 to avoid
having to use unclear number indices in device trees.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220622161322.168017-2-y.oudjana@protonmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

ASoC has snd_soc_of_get_dai_link_cpus/codecs(), and these are almost same
code. The main difference are below.

	for_each_link_cpus()	dai_link->cpus		dai_link->num_cpus
	for_each_link_codecs()	dai_link->codecs	dai_link->num_codecs

Because we need to use these parameters, we can't share full-code for now,
but can share some codes.
This patch adds __snd_soc_of_get/put_xxx() functions, and share the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y1xpp7ju.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

commit 900dedd7 ("ASoC: Introduce snd_soc_of_get_dai_link_cpus")
adds new snd_soc_of_get_dai_link_cpus(), but it is using
"codec" everywhere. It is very strange, and is issue when error case.
It should call cpu instead of codec in error case.
This patch tidyup it.

Fixes: 900dedd7 ("ASoC: Introduce snd_soc_of_get_dai_link_cpus")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/87zgi5p7k1.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

Historically, the legacy DAI naming scheme was applied to platform
drivers and the newer scheme to CODEC drivers. During componentisation
the core lost the knowledge of if a driver was a CODEC or platform, they
were all now components. To continue to support the legacy naming on
older platform drivers a flag was added to the snd_soc_component_driver
structure, non_legacy_dai_naming, to indicate to use the new scheme and
this was applied to all CODECs as part of the migration.

However, a slight issue appears to be developing with respect to this
flag being opt in for the non-legacy scheme, which presumably we want to
be the primary scheme used. Many codec drivers appear to forget to
include this flag:

  grep -l -r "snd_soc_component_driver" sound/soc/codecs/*.c |
  xargs grep -L "non_legacy_dai_naming" | wc
     48      48    556

Whilst in many cases the configuration of the DAIs themselves will cause
the core to apply the new scheme anyway, it would seem more sensible to
change the flag to legacy_dai_naming making the new scheme opt out. This
patch series migrates across to such a scheme.

Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

This patchset adds support for WSA883x smart speaker amplifier codec
connected via SoundWire. This codec also has a temperature sensor used
for speaker protection, support for this is not added yet.

Most of the code is derived from Qualcomm downstream msm-5.10 kernel.
Thanks to Patrick Lai's Team.

This codec is tested on SM8450 MTP.

Remove the unwanted dma settings in rockchip_i2s_probe.

Fixes: 44f362c2 ("ASoC: rockchip: i2s: switch BCLK to GPIO")
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Link: https://lore.kernel.org/r/20220629080421.2427933-1-judyhsiao@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the NXP MICFIL binding to DT schema format using json-schema.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1656386005-29376-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Previous default settings resulted in loose dynamic
range and low sound level.
New default configuration changes:
- outgain = 2
- quality mode = VLOW0
- dc remover = bypass
Signed-off-by: Irina Patru <ioana-irina.patru@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1656405589-29850-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

In TDM mode, the BSEL register value must be set according to table 5 in the
datasheet. This patch adds a lookup function and uses it in
max98396_dai_tdm_slot().

As the first 3 entries can also be used for non-TDM setups, the code re-uses
the same table for such scenarios.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220629050630.2848317-1-daniel@zonque.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Use dev_dbg on missing i2s->pinctrl as the pinctrl property is optional.

Fixes: 44f362c2 ("ASoC: rockchip: i2s: switch BCLK to GPIO")
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Link: https://lore.kernel.org/r/20220629080345.2427872-1-judyhsiao@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add missing Qualcomm codes to the list.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220629090644.67982-5-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to WSA8830/WSA8812/WSA8835 Class-D Smart
Speaker Amplifier. This Amplifier is primarily interfaced with
SoundWire.

This patch is tested on SM8450 MTP Board.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220629090644.67982-3-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds bindings for WSA883x Smart Speaker Amplifier.
This Amplifier also has a simple thermal sensor for temperature
measurments with speaker protection.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220629090644.67982-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add Machine driver support for audioreach solution, which uses
ADSP in SC7280 based paltforms.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Link: https://lore.kernel.org/r/1656326662-14524-1-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Mark Brown <broonie@kernel.org>

The documented yaml compat string for the apq8016 is
"qcom,apq8016-lpass-cpu" not "qcom,lpass-cpu-apq8016". Looking at the other
lpass compat strings the general form is "qcom,socnum-lpass-cpu".

We need to fix both the driver and dts to match.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20220628120435.3044939-2-bryan.odonoghue@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:

Support PDM format and DSD format.
Add new dts property to configure dataline. The SAI has multiple
successive FIFO registers, but in some use
case the required dataline/FIFOs are not successive.

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

After a set of SOF-specific changes, this patchset correct problematic
uses of pm_runtime_get_sync() in ASoC, or simplifies the flow with no
functional changes. Two patches for Intel platforms also add a test on
resume success.

Additional changes were initially suggested to completely remove the
use of pm_runtime_get_sync(). These changes were dropped since they
are way too invasive, specifically in cases where the return values
were not tested, which would lead to duplicate pm_runtime_put(). The
remaining uses of pm_runtime_get_sync() cannot really be blindly
modified without context and knowledge of each driver.

h1940_uda1380 uses gpiod*/GPIOD* so it should include GPIO consumer
header.

Fixes: 9666e27f ("ASoC: samsung: h1940: turn into platform driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627141900.470469-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Allow compile testing of Samsung SoC Sound drivers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627143412.477226-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The module does not use anything from gpio.h header.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627143412.477226-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

There is no particular need to restrict building of S3C I2S driver to
supported platforms within the C unit, because Kconfig does it.
Removing such restricting #ifdef from s3c-i2s-v2 allows compile testing
it on other platforms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627143412.477226-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Daniel Mack <daniel@zonque.org>:

This is a series of some patches that I collected while using the
max98396 driver is a TDM mode setup.

They correct BSEL and PCM mode configs, add support for power supplies
and add some bits to the documentation.

The code is tested in TDM-16 and TDM-8 mode with 32 channel width.

Merge series from Samuel Holland <samuel@sholland.org>:

This series adds support for enabling the codec's internal microphone
bias, which is needed on at least some versions of the PinePhone.

Changes in v2:
 - Move register update from component probe to device probe

Arnaud Ferraris (2):
  ASoC: dt-bindings: sun50i-codec: Add binding for internal bias
  ASoC: sun50i-codec-analog: Add support for internal bias

Samuel Holland (1):
  arm64: dts: allwinner: pinephone: Enable internal HMIC bias

 .../bindings/sound/allwinner,sun50i-a64-codec-analog.yaml | 5 +++++
 .../arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts | 4 ++++
 .../arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts | 4 ++++
 sound/soc/sunxi/sun50i-codec-analog.c                     | 8 ++++++++
 4 files changed, 21 insertions(+)

--
2.35.1

The conversion of the set_fmt callback to direct clock specification
included a small typo, correct the affected code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627094335.3051210-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Further development will need some of the fixes.

The SAI has multiple successive FIFO registers, but in some use
case the required dataline/FIFOs are not successive, so need
get such information from dts property "fsl,dataline"

fsl,dataline has 3 values for each configuration:
first one means the type: I2S(1) or DSD(2),
second one is dataline mask for 'rx',
third one is dataline mask for 'tx'.

Also set dma peripheral address and TRCE bits according to data lane.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Link: https://lore.kernel.org/r/1655451877-16382-8-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

"fsl,dataline" is added to configure the dataline of SAI.
It has 3 value for each configuration, first one means the type:
I2S(1) or PDM(2), second one is dataline mask for 'rx', third one is
dataline mask for 'tx'. for example:

fsl,dataline = <1 0xff 0xff 2 0xff 0x11>,

it means I2S type rx mask is 0xff, tx mask is 0xff, PDM type
rx mask is 0xff, tx mask is 0x11 (dataline 1 and 4 enabled).
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1655451877-16382-7-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>