- 14 May, 2019 32 commits
-
-
Wei Qiao authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit e1dc9b08 upstream. SPRD_TIMEOUT was 256, which is too small to wait until the status switched to workable in a while loop, so that the earlycon could not work correctly. Signed-off-by:
Wei Qiao <wei.qiao@spreadtrum.com> Signed-off-by:
Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 5ea8ea2c upstream. Per listen(fd, backlog) rules, there is really no point accepting a SYN, sending a SYNACK, and dropping the following ACK packet if accept queue is full, because application is not draining accept queue fast enough. This behavior is fooling TCP clients that believe they established a flow, while there is nothing at server side. They might then send about 10 MSS (if using IW10) that will be dropped anyway while server is under stress. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Baolin Wang authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 511a36d2 upstream. When usb gadget is set gadget serial function, it will be crash in below situation. It will clean the 'port->port_usb' pointer in gserial_disconnect() function when usb link is inactive, but it will release lock for disabling the endpoints in this function. Druing the lock release period, it maybe complete one request to issue gs_write_complete()--->gs_start_tx() function, but the 'port->port_usb' pointer had been set NULL, thus it will be crash in gs_start_tx() function. This patch adds the 'port->port_usb' pointer checking in gs_start_tx() function to avoid this situation. Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Peter Chen authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit c526c62d upstream. cdev->config is checked for null pointer at above code, so cdev->config might be null, fix it by adding null pointer check. Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Wolfram Sang authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 78283edf upstream. I tried to use 'make O=...' from an unclean source tree. This triggered the error path of setlocalversion. But by printing to STDOUT, it created a broken localversion which then caused another (unrelated) error: "4.7.0-rc2Error: kernelrelease not valid - run make prepare to update it" exceeds 64 characters After printing to STDERR, the true build error gets displayed later: /home/wsa/Kernel/linux is not clean, please run 'make mrproper' in the '/home/wsa/Kernel/linux' directory. Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Roger Quadros authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 04c08008 upstream. Pin state might have changed during suspend/resume while our interrupts were disabled and if device doesn't support wakeup. Scan for change during resume for such case. Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Konstantin Khlebnikov authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit e4c5800a upstream. This check effectively catches anon vma hierarchy inconsistence and some vma corruptions. It was effective for catching corner cases in anon vma reusing logic. For now this code seems stable so check could be hidden under CONFIG_DEBUG_VM and replaced with WARN because it's not so fatal. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Suggested-by:
Vasily Averin <vvs@virtuozzo.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dong Aisheng authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit e51534c8 upstream. Currently MMC core will keep going if HS200/HS timing switch failed with -EBADMSG error by the assumption that the old timing is still valid. However, for mmc_select_hs200 case, the signal voltage may have already been switched. If the timing switch failed, we should fall back to the old voltage in case the card is continue run with legacy timing. If fall back signal voltage failed, we explicitly report an EIO error to force retry during the next power cycle. Signed-off-by:
Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
James Morse authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 6afedcd2 upstream. With CONFIG_PROVE_LOCKING, CONFIG_DEBUG_LOCKDEP and CONFIG_TRACE_IRQFLAGS enabled, lockdep will compare current->hardirqs_enabled with the flags from local_irq_save(). When a debug exception occurs, interrupts are disabled in entry.S, but lockdep isn't told, resulting in: DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) ------------[ cut here ]------------ WARNING: at ../kernel/locking/lockdep.c:3523 Modules linked in: CPU: 3 PID: 1752 Comm: perf Not tainted 4.5.0-rc4+ #2204 Hardware name: ARM Juno development board (r1) (DT) task: ffffffc974868000 ti: ffffffc975f40000 task.ti: ffffffc975f40000 PC is at check_flags.part.35+0x17c/0x184 LR is at check_flags.part.35+0x17c/0x184 pc : [<ffffff80080fc93c>] lr : [<ffffff80080fc93c>] pstate: 600003c5 [...] ---[ end trace 74631f9305ef5020 ]--- Call trace: [<ffffff80080fc93c>] check_flags.part.35+0x17c/0x184 [<ffffff80080ffe30>] lock_acquire+0xa8/0xc4 [<ffffff8008093038>] breakpoint_handler+0x118/0x288 [<ffffff8008082434>] do_debug_exception+0x3c/0xa8 [<ffffff80080854b4>] el1_dbg+0x18/0x6c [<ffffff80081e82f4>] do_filp_open+0x64/0xdc [<ffffff80081d6e60>] do_sys_open+0x140/0x204 [<ffffff80081d6f58>] SyS_openat+0x10/0x18 [<ffffff8008085d30>] el0_svc_naked+0x24/0x28 possible reason: unannotated irqs-off. irq event stamp: 65857 hardirqs last enabled at (65857): [<ffffff80081fb1c0>] lookup_mnt+0xf4/0x1b4 hardirqs last disabled at (65856): [<ffffff80081fb188>] lookup_mnt+0xbc/0x1b4 softirqs last enabled at (65790): [<ffffff80080bdca4>] __do_softirq+0x1f8/0x290 softirqs last disabled at (65757): [<ffffff80080be038>] irq_exit+0x9c/0xd0 This patch adds the annotations to do_debug_exception(), while trying not to call trace_hardirqs_off() if el1_dbg() interrupted a task that already had irqs disabled. Signed-off-by:
James Morse <james.morse@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Roger Quadros authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 9772b47a upstream. Gadget controller might not be always active during system suspend/resume as gadget driver might not have yet been loaded or might have been unloaded prior to system suspend. Check if we're active and only then perform necessary actions during suspend/resume. Signed-off-by:
-
Russell King authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 10a16a01 upstream. Each time a driver such as sdhci-esdhc-imx is probed, we get a info printk complaining that the DT voltage-ranges property has not been specified. However, the DT binding specifically says that the voltage-ranges property is optional. That means we should not be complaining that DT hasn't specified this property: by indicating that it's optional, it is valid not to have the property in DT. Silence the warning if the property is missing. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Wolfram Sang authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit ed9feec7 upstream. The bus width is sometimes the actual bus width, and sometimes indices to different arrays encoding the bus width. In my debugging case "2" could mean 8-bit as well as 4-bit, which was extremly confusing. Let's use the human-readable actual bus width in all places. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Wolfram Sang authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 4ec96b4c upstream. IMO this info is only useful for developers. Most users won't need this information, since there is not much they can do about it. Signed-off-by:
-
Chuanxiao Dong authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit e5905ff1 upstream. Clock frequency values written to an mmc host should not be less than the minimum clock frequency which the mmc host supports. Signed-off-by:
Yuan Juntao <juntaox.yuan@intel.com> Signed-off-by:
Pawel Wodkowski <pawelx.wodkowski@intel.com> Signed-off-by:
-
Martin Fuzzey authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 64a67d47 upstream. The DT binding doc says reset-gpios is an optional property but the code currently bails out if it is omitted. This is a regression since it breaks previously working device trees. Fix it by restoring the original documented behaviour. Fixes: ce037275 ("mmc: pwrseq_simple: use GPIO descriptors array API") Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by:
-
Hui Wang authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit b5a236c1 upstream. Recently we found the audio jack detection stop working after suspend on many machines with Realtek codec. Sometimes the audio selection dialogue didn't show up after users plugged headhphone/headset into the headset jack, sometimes after uses plugged headphone/headset, then click the sound icon on the upper-right corner of gnome-desktop, it also showed the speaker rather than the headphone. The root cause is that before suspend, the codec already call the runtime_suspend since this codec is not used by any apps, then in resume, it will not call runtime_resume for this codec. But for some realtek codec (so far, alc236, alc255 and alc891) with the specific BIOS, if it doesn't run runtime_resume after suspend, all codec functions including jack detection stop working anymore. This problem existed for a long time, but it was not exposed, that is because when problem happens, if users play sound or open sound-setting to check audio device, this will trigger calling to runtime_resume (via snd_hda_power_up), then the codec starts working again before users notice this problem. Since we don't know how many codec and BIOS combinations have this problem, to fix it, let the driver call runtime_resume for all codecs in pm_resume, maybe for some codecs, this is not needed, but it is harmless. After a codec is runtime resumed, if it is not used by any apps, it will be runtime suspended soon and furthermore we don't run suspend frequently, this change will not add much power consumption. Fixes: cc72da7d ("ALSA: hda - Use standard runtime PM for codec power-save control") Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 98081ca6 upstream. Currently we deal with single codec and suspend codec callbacks for all S3, S4 and runtime PM handling. But it turned out that we want distinguish the call patterns sometimes, e.g. for applying some init sequence only at probing and restoring from hibernate. This patch slightly modifies the common PM callbacks for HD-audio codec and stores the currently processed PM event in power_state of the codec's device.power field, which is currently unused. The codec callback can take a look at this event value and judges which purpose it's being called. Signed-off-by:
-
Waiman Long authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 71492580 upstream. Tetsuo Handa had reported he saw an incorrect "downgrading a read lock" warning right after a previous lockdep warning. It is likely that the previous warning turned off lock debugging causing the lockdep to have inconsistency states leading to the lock downgrade warning. Fix that by add a check for debug_locks at the beginning of __lock_downgrade(). Debugged-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by:
Waiman Long <longman@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/r/1547093005-26085-1-git-send-email-longman@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Hans Verkuil authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit f45f3f75 upstream. Control events can leak kernel memory since they do not fully zero the event. The same code is present in both v4l2-ctrls.c and uvc_ctrl.c, so fix both. It appears that all other event code is properly zeroing the structure, it's these two places. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+4f021cf3697781dbd9fb@syzkaller.appspotmail.com Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Sergei Shtylyov authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 5c27ff5d upstream. I have encountered an interrupt storm during the eMMC chip probing (and the chip finally didn't get detected). It turned out that U-Boot left the DMAC interrupts enabled while the Linux driver didn't use those. The SDHI driver's interrupt handler somehow assumes that, even if an SDIO interrupt didn't happen, it should return IRQ_HANDLED. I think that if none of the enabled interrupts happened and got handled, we should return IRQ_NONE -- that way the kernel IRQ code recoginizes a spurious interrupt and masks it off pretty quickly... Fixes: 7729c7a2 ("mmc: tmio: Provide separate interrupt handlers") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Cc: stable@vger.kernel.org Signed-off-by:
-
zhangyi (F) authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 674a2b27 upstream. All indirect buffers get by ext4_find_shared() should be released no mater the branch should be freed or not. But now, we forget to release the lower depth indirect buffers when removing space from the same higher depth indirect block. It will lead to buffer leak and futher more, it may lead to quota information corruption when using old quota, consider the following case. - Create and mount an empty ext4 filesystem without extent and quota features, - quotacheck and enable the user & group quota, - Create some files and write some data to them, and then punch hole to some files of them, it may trigger the buffer leak problem mentioned above. - Disable quota and run quotacheck again, it will create two new aquota files and write the checked quota information to them, which probably may reuse the freed indirect block(the buffer and page cache was not freed) as data block. - Enable quota again, it will invoke vfs_load_quota_inode()->invalidate_bdev() to try to clean unused buffers and pagecache. Unfortunately, because of the buffer of quota data block is still referenced, quota code cannot read the up to date quota info from the device and lead to quota information corruption. This problem can be reproduced by xfstests generic/231 on ext3 file system or ext4 file system without extent and quota features. This patch fix this problem by releasing the missing indirect buffers, in ext4_ind_remove_space(). Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhangyi (F) <yi.zhang@huawei.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by:
-
Lukas Czerner authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 372a03e0 upstream. Ext4 needs to serialize unaligned direct AIO because the zeroing of partial blocks of two competing unaligned AIOs can result in data corruption. However it decides not to serialize if the potentially unaligned aio is past i_size with the rationale that no pending writes are possible past i_size. Unfortunately if the i_size is not block aligned and the second unaligned write lands past i_size, but still into the same block, it has the potential of corrupting the previous unaligned write to the same block. This is (very simplified) reproducer from Frank // 41472 = (10 * 4096) + 512 // 37376 = 41472 - 4096 ftruncate(fd, 41472); io_prep_pwrite(iocbs[0], fd, buf[0], 4096, 37376); io_prep_pwrite(iocbs[1], fd, buf[1], 4096, 41472); io_submit(io_ctx, 1, &iocbs[1]); io_submit(io_ctx, 1, &iocbs[2]); io_getevents(io_ctx, 2, 2, events, NULL); Without this patch the 512B range from 40960 up to the start of the second unaligned write (41472) is going to be zeroed overwriting the data written by the first write. This is a data corruption. 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00009200 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 * 0000a000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 0000a200 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 With this patch the data corruption is avoided because we will recognize the unaligned_aio and wait for the unwritten extent conversion. 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00009200 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 * 0000a200 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 * 0000b200 Reported-by:
Frank Sorenson <fsorenso@redhat.com> Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
-
Jiufei Xue authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit fa30dde3 upstream. We see the following NULL pointer dereference while running xfstests generic/475: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 8000000c84bad067 P4D 8000000c84bad067 PUD c84e62067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 7 PID: 9886 Comm: fsstress Kdump: loaded Not tainted 5.0.0-rc8 #10 RIP: 0010:ext4_do_update_inode+0x4ec/0x760 ... Call Trace: ? jbd2_journal_get_write_access+0x42/0x50 ? __ext4_journal_get_write_access+0x2c/0x70 ? ext4_truncate+0x186/0x3f0 ext4_mark_iloc_dirty+0x61/0x80 ext4_mark_inode_dirty+0x62/0x1b0 ext4_truncate+0x186/0x3f0 ? unmap_mapping_pages+0x56/0x100 ext4_setattr+0x817/0x8b0 notify_change+0x1df/0x430 do_truncate+0x5e/0x90 ? generic_permission+0x12b/0x1a0 This is triggered because the NULL pointer handle->h_transaction was dereferenced in function ext4_update_inode_fsync_trans(). I found that the h_transaction was set to NULL in jbd2__journal_restart but failed to attached to a new transaction while the journal is aborted. Fix this by checking the handle before updating the inode. Fixes: b436b9be ("ext4: Wait for proper transaction commit on fsync") Signed-off-by:
Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: stable@kernel.org Signed-off-by:
-
Chen Jie authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 5a07168d upstream. The futex code requires that the user space addresses of futexes are 32bit aligned. sys_futex() checks this in futex_get_keys() but the robust list code has no alignment check in place. As a consequence the kernel crashes on architectures with strict alignment requirements in handle_futex_death() when trying to cmpxchg() on an unaligned futex address which was retrieved from the robust list. [ tglx: Rewrote changelog, proper sizeof() based alignement check and add comment ] Fixes: 0771dfef ("[PATCH] lightweight robust futexes: core") Signed-off-by:
Chen Jie <chenjie6@huawei.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: <dvhart@infradead.org> Cc: <peterz@infradead.org> Cc: <zengweilin@huawei.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1552621478-119787-1-git-send-email-chenjie6@huawei.comSigned-off-by:
-
Archer Yan authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 47c25036 upstream. Insert Branch instruction instead of NOP to make sure assembler don't patch code in forbidden slot. In jump label function, it might be possible to patch Control Transfer Instructions(CTIs) into forbidden slot, which will generate Reserved Instruction exception in MIPS release 6. Signed-off-by:
Archer Yan <ayan@wavecomp.com> Reviewed-by:
Paul Burton <paul.burton@mips.com> [paul.burton@mips.com: - Add MIPS prefix to subject. - Mark for stable from v4.0, which introduced r6 support, onwards.] Signed-off-by:
-
Yifeng Li authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit 5f5f67da upstream. Timekeeping IRQs from CS5536 MFGPT are routed to i8259, which then triggers the "cascade" IRQ on MIPS CPU. Without IRQF_NO_SUSPEND in cascade_irqaction, MFGPT interrupts will be masked in suspend mode, and the machine would be unable to resume once suspended. Previously, MIPS IRQs were not disabled properly, so the original code appeared to work. Commit a3e6c1ef ("MIPS: IRQ: Fix disable_irq on CPU IRQs") uncovers the bug. To fix it, add IRQF_NO_SUSPEND to cascade_irqaction. This commit is functionally identical to 0add9c2f ("MIPS: Loongson-3: Add IRQF_NO_SUSPEND to Cascade irqaction"), but it forgot to apply the same fix to Loongson2. Signed-off-by:
Yifeng Li <tomli@tomli.me> Signed-off-by:
-
Jan Kara authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit d3ca4651 upstream. When truncate(2) hits IO error when reading indirect extent block the code just bugs with: kernel BUG at linux-4.15.0/fs/udf/truncate.c:249! ... Fix the problem by bailing out cleanly in case of IO error. CC: stable@vger.kernel.org Reported-by:
jean-luc malet <jeanluc.malet@gmail.com> Signed-off-by:
-
Thomas Zimmermann authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit c2d31155 upstream. When calling vmw_fb_set_par(), the mode stored in par->set_mode gets free'd twice. The first free is in vmw_fb_kms_detach(), the second is near the end of vmw_fb_set_par() under the name of 'old_mode'. The mode-setting code only works correctly if the mode doesn't actually change. Removing 'old_mode' in favor of using par->set_mode directly fixes the problem. Cc: <stable@vger.kernel.org> Fixes: a278724a ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Deepak Rawat <drawat@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1826212 commit e60a582b upstream. clang points out several instances of mismatched types in this drivers, all coming from a single declaration: drivers/mmc/host/pxamci.c:193:15: error: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Werror,-Wenum-conversion] direction = DMA_DEV_TO_MEM; ~ ^~~~~~~~~~~~~~ drivers/mmc/host/pxamci.c:212:62: error: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Werror,-Wenum-conversion] tx = dmaengine_prep_slave_sg(chan, data->sg, host->dma_len, direction, The behavior is correct, so this must be a simply typo from dma_data_direction and dma_transfer_direction being similarly named types with a similar purpose. Fixes: 6464b714 ("mmc: pxamci: switch over to dmaengine use") Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Cc: stable@vger.kernel.org Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1825780 Fix kprobe string argument testcase to not probe notrace function. Instead, it probes tracefs function which must be available with ftrace. Link: http://lkml.kernel.org/r/153294607107.32740.1664854684396589624.stgit@devboxSigned-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> (cherry picked from commit 6fc7c411) Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
Khalid Elmously <khalid.elmously@canonical.com> Acked-by:
-
Po-Hsu Lin authored
BugLink: https://bugs.launchpad.net/bugs/1825777 The run_netsocktests will be marked as passed regardless the actual test result from the ./socket: selftests: net: run_netsocktests ======================================== -------------------- running socket test -------------------- [FAIL] ok 1..6 selftests: net: run_netsocktests [PASS] This is because the test script itself has been successfully executed. Fix this by exit 1 when the test failed. Signed-off-by:
-
Stefan Bader authored
Ignore: yes Signed-off-by:
-
- 07 May, 2019 8 commits
-
-
Stefan Bader authored
Signed-off-by: -
Josh Poimboeuf authored
Add MDS to the new 'mitigations=' cmdline option. Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Acked-by:
Tyler Hicks <tyhicks@canonical.com> Acked-by:
-
Josh Poimboeuf authored
Configure s390 runtime CPU speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Spectre v1 and Spectre v2. The default behavior is unchanged. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Price <steven.price@arm.com> Cc: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/e4a161805458a5ec88812aac0307ae3908a030fc.1555085500.git.jpoimboe@redhat.com CVE-2017-5715 CVE-2017-5753 (backported from commit 0336e04a https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git) [juergh: - Adjusted context. - Adjusted file path Documentation/kernel-parameters.txt.] Signed-off-by:
-
Josh Poimboeuf authored
Configure powerpc CPU runtime speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Meltdown, Spectre v1, Spectre v2, and Speculative Store Bypass. The default behavior is unchanged. Signed-off-by:
-
Josh Poimboeuf authored
Configure x86 runtime CPU speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Meltdown, Spectre v2, Speculative Store Bypass, and L1TF. The default behavior is unchanged. Signed-off-by:
-
Josh Poimboeuf authored
Keeping track of the number of mitigations for all the CPU speculation bugs has become overwhelming for many users. It's getting more and more complicated to decide which mitigations are needed for a given architecture. Complicating matters is the fact that each arch tends to have its own custom way to mitigate the same vulnerability. Most users fall into a few basic categories: a) they want all mitigations off; b) they want all reasonable mitigations on, with SMT enabled even if it's vulnerable; or c) they want all reasonable mitigations on, with SMT disabled if vulnerable. Define a set of curated, arch-independent options, each of which is an aggregation of existing options: - mitigations=off: Disable all mitigations. - mitigations=auto: [default] Enable all the default mitigations, but leave SMT enabled, even if it's vulnerable. - mitigations=auto,nosmt: Enable all the default mitigations, disabling SMT if needed by a mitigation. Currently, these options are placeholders which don't actually do anything. They will be fleshed out in upcoming patches. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
This code is only for CPUs which are affected by MSBDS, but are *not* affected by the other two MDS issues. For such CPUs, enabling the mds_idle_clear mitigation is enough to mitigate SMT. However if user boots with 'mds=off' and still has SMT enabled, we should not report that SMT is mitigated: $cat /sys//devices/system/cpu/vulnerabilities/mds Vulnerable; SMT mitigated But rather: Vulnerable; SMT vulnerable Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Boris Ostrovsky authored
s/L1TF/MDS/ Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
