Where XHLOCK_{SOFT,HARD} are save/restore points in the xhlocks[] to
ensure the temporal IRQ events don't interact with task state, the
XHLOCK_PROC is a fundament different beast that just happens to share
the interface.

The purpose of XHLOCK_PROC is to annotate independent execution inside
one task. For example workqueues, each work should appear to run in its
own 'pristine' 'task'.

Remove XHLOCK_PROC in favour of its own interface to avoid confusion.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: david@fromorbit.com
Cc: johannes@sipsolutions.net
Cc: kernel-team@lge.com
Cc: oleg@redhat.com
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/20170829085939.ggmb6xiohw67micb@hirez.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>

Mike Galbraith bisected a boot crash back to the following commit:

  7a46ec0e ("locking/refcounts, x86/asm: Implement fast refcount overflow protection")

The crash/hang pattern is:

 > Symptom is a few splats as below, with box finally hanging.  Network
 > comes up, but neither ssh nor console login is possible.
 >
 >  ------------[ cut here ]------------
 >  WARNING: CPU: 4 PID: 0 at net/netlink/af_netlink.c:374 netlink_sock_destruct+0x82/0xa0
 >  ...
 >  __sk_destruct()
 >  rcu_process_callbacks()
 >  __do_softirq()
 >  irq_exit()
 >  smp_apic_timer_interrupt()
 >  apic_timer_interrupt()

We are at -rc7 already, and the code has grown some dependencies, so
instead of a plain revert disable the config temporarily, in the hope
of getting real fixes.
Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/tip-7a46ec0e2f4850407de5e1d19a44edee6efa58ec@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

There is code duplicated over all architecture's headers for
futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr,
and comparison of the result.

Remove this duplication and leave up to the arches only the needed
assembly which is now in arch_futex_atomic_op_inuser.

This effectively distributes the Will Deacon's arm64 fix for undefined
behaviour reported by UBSAN to all architectures. The fix was done in
commit 5f16a046 (arm64: futex: Fix undefined behaviour with
FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump.

And as suggested by Thomas, check for negative oparg too, because it was
also reported to cause undefined behaviour report.

Note that s390 removed access_ok check in d12a2970 ("s390/uaccess:
remove pointless access_ok() checks") as access_ok there returns true.
We introduce it back to the helper for the sake of simplicity (it gets
optimized away anyway).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390]
Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Reviewed-by: Will Deacon <will.deacon@arm.com> [core/arm64]
Cc: linux-mips@linux-mips.org
Cc: Rich Felker <dalias@libc.org>
Cc: linux-ia64@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: peterz@infradead.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: sparclinux@vger.kernel.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: linux-s390@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-hexagon@vger.kernel.org
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-xtensa@linux-xtensa.org
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: openrisc@lists.librecores.org
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Stafford Horne <shorne@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Richard Henderson <rth@twiddle.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-parisc@vger.kernel.org
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-alpha@vger.kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz

Julia reported that the document looked unfinished, and it is. I
forgot to include the example cooked up by Paul here:

  https://lkml.kernel.org/r/20170731174345.GL3730@linux.vnet.ibm.com

and I added an explicit example showing how, while it is an ACQUIRE
pattern, it really does provide an MB.
Reported-by: Julia Cartwright <julia@ni.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The new completion/crossrelease annotations interact unfavourable with
the extant flush_work()/flush_workqueue() annotations.

The problem is that when a single work class does:

  wait_for_completion(&C)

and

  complete(&C)

in different executions, we'll build dependencies like:

  lock_map_acquire(W)
  complete_acquire(C)

and

  lock_map_acquire(W)
  complete_release(C)

which results in the dependency chain: W->C->W, which lockdep thinks
spells deadlock, even though there is no deadlock potential since
works are ran concurrently.

One possibility would be to change the work 'lock' to recursive-read,
but that would mean hitting a lockdep limitation on recursive locks.
Also, unconditinoally switching to recursive-read here would fail to
detect the actual deadlock on single-threaded workqueues, which do
have a problem with this.

For now, forcefully disregard these locks for crossrelease.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: byungchul.park@lge.com
Cc: david@fromorbit.com
Cc: johannes@sipsolutions.net
Cc: oleg@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The flush_work() annotation as introduced by commit:

  e159489b ("workqueue: relax lockdep annotation on flush_work()")

hits on the lockdep problem with recursive read locks.

The situation as described is:

Work W1:                Work W2:        Task:

ARR(Q)                  ARR(Q)		flush_workqueue(Q)
A(W1)                   A(W2)             A(Q)
  flush_work(W2)			  R(Q)
    A(W2)
    R(W2)
    if (special)
      A(Q)
    else
      ARR(Q)
    R(Q)

where: A - acquire, ARR - acquire-read-recursive, R - release.

Where under 'special' conditions we want to trigger a lock recursion
deadlock, but otherwise allow the flush_work(). The allowing is done
by using recursive read locks (ARR), but lockdep is broken for
recursive stuff.

However, there appears to be no need to acquire the lock if we're not
'special', so if we remove the 'else' clause things become much
simpler and no longer need the recursion thing at all.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: byungchul.park@lge.com
Cc: david@fromorbit.com
Cc: johannes@sipsolutions.net
Cc: oleg@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Currently lockdep has limited support for recursive readers, add a few
mixed read-write ABBA selftests to show the extend of these
limitations.

  [    0.000000] ----------------------------------------------------------------------------
  [    0.000000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
  [    0.000000]   --------------------------------------------------------------------------

  [    0.000000]   mixed read-lock/lock-write ABBA:             |FAILED|             |  ok  |
  [    0.000000]    mixed read-lock/lock-read ABBA:             |  ok  |             |  ok  |
  [    0.000000]  mixed write-lock/lock-write ABBA:             |  ok  |             |  ok  |

This clearly illustrates the case where lockdep fails to find a
deadlock.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: byungchul.park@lge.com
Cc: david@fromorbit.com
Cc: johannes@sipsolutions.net
Cc: oleg@redhat.com
Cc: tj@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Better document the ordering around tlb_flush_pending().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull more rdma fixes from Doug Ledford:
 "Well, I thought we were going to be done for this -rc cycle. I should
  have known better than to say so though.

  We have four additional items that trickled in.

  One was a simple mistake on my part. I took a patch into my for-next
  thinking that the issue was less severe than it was. I was then
  notified that it needed to be in my -rc area instead.

  The other three were just found late in testing.

  Summary:

   - One core fix accidentally applied first to for-next and then cherry
     picked back because it needed to be in the -rc cycles instead

   - Another core fix

   - Two mlx5 fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/mlx5: Always return success for RoCE modify port
  IB/mlx5: Fix Raw Packet QP event handler assignment
  IB/core: Avoid accessing non-allocated memory when inferring port type
  RDMA/uverbs: Initialize cq_context appropriately

Pull ACPI fixes from Rafael Wysocki:
 "These fix two recent regressions (in ACPICA and in the ACPI EC driver)
  and one bug in code introduced during the 4.12 cycle (ACPI device
  properties library routine).

  Specifics:

   - Fix a regression in the ACPI EC driver causing a kernel to crash
     during initialization on some systems due to a code ordering issue
     exposed by a recent change (Lv Zheng).

   - Fix a recent regression in ACPICA due to a change of the behavior
     of a library function in a way that is not backwards compatible
     with some existing callers of it (Rafael Wysocki).

   - Fix a coding mistake in a library function related to the handling
     of ACPI device properties introduced during the 4.12 cycle (Sakari
     Ailus)"

* tag 'acpi-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: device property: Fix node lookup in acpi_graph_get_child_prop_value()
  ACPICA: Fix acpi_evaluate_object_typed()
  ACPI: EC: Fix regression related to wrong ECDT initialization order

Merge tag 'kbuild-fixes-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix linker script regression caused by dead code elimination support

 - fix typos and outdated comments

 - specify kselftest-clean as a PHONY target

 - fix "make dtbs_install" when $(srctree) includes shell special
   characters like '~'

 - Move -fshort-wchar to the global option list because defining it
   partially emits warnings

* tag 'kbuild-fixes-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: update comments of Makefile.asm-generic
  kbuild: Do not use hyphen in exported variable name
  Makefile: add kselftest-clean to PHONY target list
  Kbuild: use -fshort-wchar globally
  fixdep: trivial: typo fix and correction
  kbuild: trivial cleanups on the comments
  kbuild: linker script do not match C names unless LD_DEAD_CODE_DATA_ELIMINATION is configured

Pull btrfs fix from David Sterba:
 "We have one more fixup that stems from the blk_status_t conversion
  that did not quite cover everything.

  The normal cases were not affected because the code is 0, but any
  error and retries could mix up new and old values"

* 'for-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix blk_status_t/errno confusion

Pull tracing fixes from Steven Rostedt:
 "Various bug fixes:

   - Two small memory leaks in error paths.

   - A missed return error code on an error path.

   - A fix to check the tracing ring buffer CPU when it doesn't exist
     (caused by setting maxcpus on the command line that is less than
     the actual number of CPUs, and then onlining them manually).

   - A fix to have the reset of boot tracers called by lateinit_sync()
     instead of just lateinit(). As some of the tracers register via
     lateinit(), and if the clear happens before the tracer is
     registered, it will never start even though it was told to via the
     kernel command line"

* tag 'trace-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix freeing of filter in create_filter() when set_str is false
  tracing: Fix kmemleak in tracing_map_array_free()
  ftrace: Check for null ret_stack on profile function graph entry function
  ring-buffer: Have ring_buffer_alloc_read_page() return error on offline CPU
  tracing: Missing error code in tracer_alloc_buffers()
  tracing: Call clear_boot_tracer() at lateinit_sync

Pull ARM SoC fixes from Arnd Bergmann:
 "A small number of bugfixes, again nothing serious.

   - Alexander Dahl found multiple bugs in the Atmel memory interface
     driver

   - A randconfig build fix for at91 was incomplete, the second attempt
     fixes the remaining corner case

   - One fix for the TI Keystone queue handler

   - The Odroid XU4 HDMI port (added in 4.13) needs a small DT fix"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: exynos: add needs-hpd for Odroid-XU3/4
  ARM: at91: don't select CONFIG_ARM_CPU_SUSPEND for old platforms
  soc: ti: knav: Add a NULL pointer check for kdev in knav_pool_create
  memory: atmel-ebi: Fix smc cycle xlate converter
  memory: atmel-ebi: Allow t_DF timings of zero ns
  memory: atmel-ebi: Fix smc timing return value evaluation

The implementation of TIOCGPTPEER has two issues.

When /dev/ptmx (as opposed to /dev/pts/ptmx) is opened the wrong
vfsmount is passed to dentry_open.  Which results in the kernel displaying
the wrong pathname for the peer.

The second is simply by caching the vfsmount and dentry of the peer it leaves
them open, in a way they were not previously Which because of the inreased
reference counts can cause unnecessary behaviour differences resulting in
regressions.

To fix these move the ioctl into tty_io.c at a generic level allowing
the ioctl to have access to the struct file on which the ioctl is
being called.  This allows the path of the slave to be derived when
opening the slave through TIOCGPTPEER instead of requiring the path to
the slave be cached.  Thus removing the need for caching the path.

A new function devpts_ptmx_path is factored out of devpts_acquire and
used to implement a function devpts_mntget.   The new function devpts_mntget
takes a filp to perform the lookup on and fsi so that it can confirm
that the superblock that is found by devpts_ptmx_path is the proper superblock.

v2: Lots of fixes to make the code actually work
v3: Suggestions by Linus
    - Removed the unnecessary initialization of filp in ptm_open_peer
    - Simplified devpts_ptmx_path as gotos are no longer required

[ This is the fix for the issue that was reverted in commit
  143c97cc, but this time without breaking 'pbuilder' due to
  increased reference counts   - Linus ]

Fixes: 54ebbfb1 ("tty: add TIOCGPTPEER ioctl")
Reported-by: Christian Brauner <christian.brauner@canonical.com>
Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* acpica-fix:
  ACPICA: Fix acpi_evaluate_object_typed()

* acpi-ec-fix:
  ACPI: EC: Fix regression related to wrong ECDT initialization order

* acpi-properties-fix:
  ACPI: device property: Fix node lookup in acpi_graph_get_child_prop_value()

CM layer calls ib_modify_port() regardless of the link layer.

For the Ethernet ports, qkey violation and Port capabilities
are meaningless. Therefore, always return success for ib_modify_port
calls on the Ethernet ports.

Cc: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

In case we have SQ and RQ for Raw Packet QP, the SQ's event handler
wasn't assigned.

Fixing this by assigning event handler for each WQ after creation.

[ 1877.145243] Call Trace:
[ 1877.148644] <IRQ>
[ 1877.150580] [<ffffffffa07987c5>] ? mlx5_rsc_event+0x105/0x210 [mlx5_core]
[ 1877.159581] [<ffffffffa0795bd7>] ? mlx5_cq_event+0x57/0xd0 [mlx5_core]
[ 1877.167137] [<ffffffffa079208e>] mlx5_eq_int+0x53e/0x6c0 [mlx5_core]
[ 1877.174526] [<ffffffff8101a679>] ? sched_clock+0x9/0x10
[ 1877.180753] [<ffffffff810f717e>] handle_irq_event_percpu+0x3e/0x1e0
[ 1877.188014] [<ffffffff810f735d>] handle_irq_event+0x3d/0x60
[ 1877.194567] [<ffffffff810f9fe7>] handle_edge_irq+0x77/0x130
[ 1877.201129] [<ffffffff81014c3f>] handle_irq+0xbf/0x150
[ 1877.207244] [<ffffffff815ed78a>] ? atomic_notifier_call_chain+0x1a/0x20
[ 1877.214829] [<ffffffff815f434f>] do_IRQ+0x4f/0xf0
[ 1877.220498] [<ffffffff815e94ad>] common_interrupt+0x6d/0x6d
[ 1877.227025] <EOI>
[ 1877.228967] [<ffffffff814834e2>] ? cpuidle_enter_state+0x52/0xc0
[ 1877.236990] [<ffffffff81483615>] cpuidle_idle_call+0xc5/0x200
[ 1877.243676] [<ffffffff8101bc7e>] arch_cpu_idle+0xe/0x30
[ 1877.249831] [<ffffffff810b4725>] cpu_startup_entry+0xf5/0x290
[ 1877.256513] [<ffffffff815cfee1>] start_secondary+0x265/0x27b
[ 1877.263111] Code: Bad RIP value.
[ 1877.267296] RIP [< (null)>] (null)
[ 1877.273264] RSP <ffff88046fd63df8>
[ 1877.277531] CR2: 0000000000000000

Fixes: 19098df2 ("IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Commit 44c58487 ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
introduced the concept of type in ah_attr:
 * During ib_register_device, each port is checked for its type which
   is stored in ib_device's port_immutable array.
 * During uverbs' modify_qp, the type is inferred using the port number
   in ib_uverbs_qp_dest struct (address vector) by accessing the
   relevant port_immutable array and the type is passed on to
   providers.

IB spec (version 1.3) enforces a valid port value only in Reset to
Init. During Init to RTR, the address vector must be valid but port
number is not mentioned as a field in the address vector, so its
value is not validated, which leads to accesses to a non-allocated
memory when inferring the port type.

Save the real port number in ib_qp during modify to Init (when the
comp_mask indicates that the port number is valid) and use this value
to infer the port type.

Avoid copying the address vector fields if the matching bit is not set
in the attr_mask. Address vector can't be modified before the port, so
no valid flow is affected.

Fixes: 44c58487 ('IB/core: Define 'ib' and 'roce' rdma_ah_attr types')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This fixes several instances of blk_status_t and bare errno ints being
mixed up, some of which are real bugs.

In the normal case, 0 matches BLK_STS_OK, so we don't observe any
effects of the missing conversion, but in case of errors or passes
through the repair/retry paths, the errors get mixed up.

The changes were identified using 'sparse', we don't have reports of the
buggy behaviour.

Fixes: 4e4cbee9 ("block: switch bios to blk_status_t")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Performing the following task with kmemleak enabled:

 # cd /sys/kernel/tracing/events/irq/irq_handler_entry/
 # echo 'enable_event:kmem:kmalloc:3 if irq >' > trigger
 # echo 'enable_event:kmem:kmalloc:3 if irq > 31' > trigger
 # echo scan > /sys/kernel/debug/kmemleak
 # cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff8800b9290308 (size 32):
  comm "bash", pid 1114, jiffies 4294848451 (age 141.139s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81cef5aa>] kmemleak_alloc+0x4a/0xa0
    [<ffffffff81357938>] kmem_cache_alloc_trace+0x158/0x290
    [<ffffffff81261c09>] create_filter_start.constprop.28+0x99/0x940
    [<ffffffff812639c9>] create_filter+0xa9/0x160
    [<ffffffff81263bdc>] create_event_filter+0xc/0x10
    [<ffffffff812655e5>] set_trigger_filter+0xe5/0x210
    [<ffffffff812660c4>] event_enable_trigger_func+0x324/0x490
    [<ffffffff812652e2>] event_trigger_write+0x1a2/0x260
    [<ffffffff8138cf87>] __vfs_write+0xd7/0x380
    [<ffffffff8138f421>] vfs_write+0x101/0x260
    [<ffffffff8139187b>] SyS_write+0xab/0x130
    [<ffffffff81cfd501>] entry_SYSCALL_64_fastpath+0x1f/0xbe
    [<ffffffffffffffff>] 0xffffffffffffffff

The function create_filter() is passed a 'filterp' pointer that gets
allocated, and if "set_str" is true, it is up to the caller to free it, even
on error. The problem is that the pointer is not freed by create_filter()
when set_str is false. This is a bug, and it is not up to the caller to free
the filter on error if it doesn't care about the string.

Link: http://lkml.kernel.org/r/1502705898-27571-2-git-send-email-chuhu@redhat.com

Cc: stable@vger.kernel.org
Fixes: 38b78eb8 ("tracing: Factorize filter creation")
Reported-by: Chunyu Hu <chuhu@redhat.com>
Tested-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

kmemleak reported the below leak when I was doing clear of the hist
trigger. With this patch, the kmeamleak is gone.

unreferenced object 0xffff94322b63d760 (size 32):
  comm "bash", pid 1522, jiffies 4403687962 (age 2442.311s)
  hex dump (first 32 bytes):
    00 01 00 00 04 00 00 00 08 00 00 00 ff 00 00 00  ................
    10 00 00 00 00 00 00 00 80 a8 7a f2 31 94 ff ff  ..........z.1...
  backtrace:
    [<ffffffff9e96c27a>] kmemleak_alloc+0x4a/0xa0
    [<ffffffff9e424cba>] kmem_cache_alloc_trace+0xca/0x1d0
    [<ffffffff9e377736>] tracing_map_array_alloc+0x26/0x140
    [<ffffffff9e261be0>] kretprobe_trampoline+0x0/0x50
    [<ffffffff9e38b935>] create_hist_data+0x535/0x750
    [<ffffffff9e38bd47>] event_hist_trigger_func+0x1f7/0x420
    [<ffffffff9e38893d>] event_trigger_write+0xfd/0x1a0
    [<ffffffff9e44dfc7>] __vfs_write+0x37/0x170
    [<ffffffff9e44f552>] vfs_write+0xb2/0x1b0
    [<ffffffff9e450b85>] SyS_write+0x55/0xc0
    [<ffffffff9e203857>] do_syscall_64+0x67/0x150
    [<ffffffff9e977ce7>] return_from_SYSCALL_64+0x0/0x6a
    [<ffffffffffffffff>] 0xffffffffffffffff
unreferenced object 0xffff9431f27aa880 (size 128):
  comm "bash", pid 1522, jiffies 4403687962 (age 2442.311s)
  hex dump (first 32 bytes):
    00 00 8c 2a 32 94 ff ff 00 f0 8b 2a 32 94 ff ff  ...*2......*2...
    00 e0 8b 2a 32 94 ff ff 00 d0 8b 2a 32 94 ff ff  ...*2......*2...
  backtrace:
    [<ffffffff9e96c27a>] kmemleak_alloc+0x4a/0xa0
    [<ffffffff9e425348>] __kmalloc+0xe8/0x220
    [<ffffffff9e3777c1>] tracing_map_array_alloc+0xb1/0x140
    [<ffffffff9e261be0>] kretprobe_trampoline+0x0/0x50
    [<ffffffff9e38b935>] create_hist_data+0x535/0x750
    [<ffffffff9e38bd47>] event_hist_trigger_func+0x1f7/0x420
    [<ffffffff9e38893d>] event_trigger_write+0xfd/0x1a0
    [<ffffffff9e44dfc7>] __vfs_write+0x37/0x170
    [<ffffffff9e44f552>] vfs_write+0xb2/0x1b0
    [<ffffffff9e450b85>] SyS_write+0x55/0xc0
    [<ffffffff9e203857>] do_syscall_64+0x67/0x150
    [<ffffffff9e977ce7>] return_from_SYSCALL_64+0x0/0x6a
    [<ffffffffffffffff>] 0xffffffffffffffff

Link: http://lkml.kernel.org/r/1502705898-27571-1-git-send-email-chuhu@redhat.com

Cc: stable@vger.kernel.org
Fixes: 08d43a5f ("tracing: Add lock-free tracing_map")
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

There's a small race when function graph shutsdown and the calling of the
registered function graph entry callback. The callback must not reference
the task's ret_stack without first checking that it is not NULL. Note, when
a ret_stack is allocated for a task, it stays allocated until the task exits.
The problem here, is that function_graph is shutdown, and a new task was
created, which doesn't have its ret_stack allocated. But since some of the
functions are still being traced, the callbacks can still be called.

The normal function_graph code handles this, but starting with commit
8861dd30 ("ftrace: Access ret_stack->subtime only in the function
profiler") the profiler code references the ret_stack on function entry, but
doesn't check if it is NULL first.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=196611

Cc: stable@vger.kernel.org
Fixes: 8861dd30 ("ftrace: Access ret_stack->subtime only in the function profiler")
Reported-by: lilydjwg@gmail.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

This reverts commit c8c03f18.

It turns out that while fixing the ptmx file descriptor to have the
correct 'struct path' to the associated slave pty is a really good
thing, it breaks some user space tools for a very annoying reason.

The problem is that /dev/ptmx and its associated slave pty (/dev/pts/X)
are on different mounts.  That was what caused us to have the wrong path
in the first place (we would mix up the vfsmount of the 'ptmx' node,
with the dentry of the pty slave node), but it also means that now while
we use the right vfsmount, having the pty master open also keeps the pts
mount busy.

And it turn sout that that makes 'pbuilder' very unhappy, as noted by
Stefan Lippers-Hollmann:

 "This patch introduces a regression for me when using pbuilder
  0.228.7[2] (a helper to build Debian packages in a chroot and to
  create and update its chroots) when trying to umount /dev/ptmx (inside
  the chroot) on Debian/ unstable (full log and pbuilder configuration
  file[3] attached).

  [...]
  Setting up build-essential (12.3) ...
  Processing triggers for libc-bin (2.24-15) ...
  I: unmounting dev/ptmx filesystem
  W: Could not unmount dev/ptmx: umount: /var/cache/pbuilder/build/1340/dev/ptmx: target is busy
          (In some cases useful info about processes that
           use the device is found by lsof(8) or fuser(1).)"

apparently pbuilder tries to unmount the /dev/pts filesystem while still
holding at least one master node open, which is arguably not very nice,
but we don't break user space even when fixing other bugs.

So this commit has to be reverted.

I'll try to figure out a way to avoid caching the path to the slave pty
in the master pty.  The only thing that actually wants that slave pty
path is the "TIOCGPTPEER" ioctl, and I think we could just recreate the
path at that time.
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Eric W Biederman <ebiederm@xmission.com>
Cc: Christian Brauner <christian.brauner@canonical.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CEC support was added for Exynos5 in 4.13, but for the Odroids we need to set
'needs-hpd' as well since CEC is disabled when there is no HDMI hotplug signal,
just as for the exynos4 Odroid-U3.

This is due to the level-shifter that is disabled when there is no HPD, thus
blocking the CEC signal as well. Same close-but-no-cigar board design as the
Odroid-U3.

Tested with my Odroid XU4.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull arm64 fixes from Will Deacon:
 "Late arm64 fixes.

  They fix very early boot failures with KASLR where the early mapping
  of the kernel is incorrect, so the failure mode looks like a hang with
  no output. There's also a signal-handling fix when a uaccess routine
  faults with a fatal signal pending, which could be used to create
  unkillable user tasks using userfaultfd and finally a state leak fix
  for the floating pointer registers across a call to exec().

  We're still seeing some random issues crop up (inode memory corruption
  and spinlock recursion) but we've not managed to reproduce things
  reliably enough to debug or bisect them yet.

  Summary:

   - Fix very early boot failures with KASLR enabled

   - Fix fatal signal handling on userspace access from kernel

   - Fix leakage of floating point register state across exec()"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kaslr: Adjust the offset to avoid Image across alignment boundary
  arm64: kaslr: ignore modulo offset when validating virtual displacement
  arm64: mm: abort uaccess retries upon fatal signal
  arm64: fpsimd: Prevent registers leaking across exec

Pull GPIO fixes from Linus Walleij:
 "Here are the (hopefully) last GPIO fixes for v4.13:

   - an important core fix to reject invalid GPIOs *before* trying to
     obtain a GPIO descriptor for it.

   - a driver fix for the mvebu driver IRQ handling"

* tag 'gpio-v4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: mvebu: Fix cause computation in irq handler
  gpio: reject invalid gpio before getting gpio_desc

Pull SCSI fixes from James Bottomley:
 "Six minor and error leg fixes, plus one major change: the reversion of
  scsi-mq as the default.

  We're doing the latter temporarily (with a backport to stable) to give
  us time to fix all the issues that turned up with this default before
  trying again"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: cxgb4i: call neigh_event_send() to update MAC address
  Revert "scsi: default to scsi-mq"
  scsi: sd_zbc: Write unlock zone from sd_uninit_cmnd()
  scsi: aacraid: Fix out of bounds in aac_get_name_resp
  scsi: csiostor: fail probe if fw does not support FCoE
  scsi: megaraid_sas: fix error handle in megasas_probe_one

My previous patch fixed a link error for all at91 platforms when
CONFIG_ARM_CPU_SUSPEND was not set, however this caused another
problem on a configuration that enabled CONFIG_ARCH_AT91 but none
of the individual SoCs, and that also enabled CPU_ARM720 as
the only CPU:

warning: (ARCH_AT91 && SOC_IMX23 && SOC_IMX28 && ARCH_PXA && MACH_MVEBU_V7 && SOC_IMX6 && ARCH_OMAP3 && ARCH_OMAP4 && SOC_OMAP5 && SOC_AM33XX && SOC_DRA7XX && ARCH_EXYNOS3 && ARCH_EXYNOS4 && EXYNOS5420_MCPM && EXYNOS_CPU_SUSPEND && ARCH_VEXPRESS_TC2_PM && ARM_BIG_LITTLE_CPUIDLE && ARM_HIGHBANK_CPUIDLE && QCOM_PM) selects ARM_CPU_SUSPEND which has unmet direct dependencies (ARCH_SUSPEND_POSSIBLE)
arch/arm/kernel/sleep.o: In function `cpu_resume':
(.text+0xf0): undefined reference to `cpu_arm720_suspend_size'
arch/arm/kernel/suspend.o: In function `__cpu_suspend_save':
suspend.c:(.text+0x134): undefined reference to `cpu_arm720_do_suspend'

This improves the hack some more by only selecting ARM_CPU_SUSPEND
for the part that requires it, and changing pm.c to drop the
contents of unused init functions so we no longer refer to
cpu_resume on at91 platforms that don't need it.

Fixes: cc7a938f ("ARM: at91: select CONFIG_ARM_CPU_SUSPEND")
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull ext4 fixes from Ted Ts'o:
 "Fix a clang build regression and an potential xattr corruption bug"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: add missing xattr hash update
  ext4: fix clang build regression

acpi_graph_get_child_prop_value() is intended to find a child node with a
certain property value pair. The check

	if (!fwnode_property_read_u32(fwnode, prop_name, &nr))
		continue;

is faulty: fwnode_property_read_u32() returns zero on success, not on
failure, leading to comparing values only if the searched property was not
found.

Moreover, the check is made against the parent device node instead of
the child one as it should be.

Fixes: 79389a83 (ACPI / property: Add support for remote endpoints)
Reported-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: 4.12+ <stable@vger.kernel.org> # 4.12+
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 2d2a9543 (ACPICA: Update two error messages to emit
control method name) causes acpi_evaluate_object_typed() to fail
if its pathname argument is NULL, but some callers of that function
in the kernel, particularly acpi_nondev_subnode_data_ok(), pass
NULL as pathname to it and expect it to work.

For this reason, make acpi_evaluate_object_typed() check if its
pathname argument is NULL and fall back to using the pathname of
its handle argument if that is the case.
Reported-by: Sakari Ailus <sakari.ailus@intel.com>
Tested-by: Yang, Hyungwoo <hyungwoo.yang@intel.com>
Fixes: 2d2a9543 (ACPICA: Update two error messages to emit control method name)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Initializing cq_context with ev_queue in create_cq(), leads to NULL pointer
dereference in ib_uverbs_comp_handler(), if application doesnot use completion
channel. This patch fixes the cq_context initialization.

Fixes: 1e7710f3 ("IB/core: Change completion channel to use the reworked")
Cc: stable@vger.kernel.org # 4.12
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
(cherry picked from commit 699a2d5b)

Pull MFD fix from Lee Jones:
 "Revert duplicate commit in da9062-core"

* tag 'mfd-fixes-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  Revert "mfd: da9061: Fix to remove BBAT_CONT register from chip model"

With 16KB pages and a kernel Image larger than 16MB, the current
kaslr_early_init() logic for avoiding mappings across swapper table
boundaries fails since increasing the offset by kimg_sz just moves the
problem to the next boundary.

This patch rounds the offset down to (1 << SWAPPER_TABLE_SHIFT) if the
Image crosses a PMD_SIZE boundary.

Fixes: afd0e5a8 ("arm64: kaslr: Fix up the kernel image alignment")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

In the KASLR setup routine, we ensure that the early virtual mapping
of the kernel image does not cover more than a single table entry at
the level above the swapper block level, so that the assembler routines
involved in setting up this mapping can remain simple.

In this calculation we add the proposed KASLR offset to the values of
the _text and _end markers, and reject it if they would end up falling
in different swapper table sized windows.

However, when taking the addresses of _text and _end, the modulo offset
(the physical displacement modulo 2 MB) is already accounted for, and
so adding it again results in incorrect results. So disregard the modulo
offset from the calculation.

Fixes: 08cdac61 ("arm64: relocatable: deal with physically misaligned ...")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

When there's a fatal signal pending, arm64's do_page_fault()
implementation returns 0. The intent is that we'll return to the
faulting userspace instruction, delivering the signal on the way.

However, if we take a fatal signal during fixing up a uaccess, this
results in a return to the faulting kernel instruction, which will be
instantly retried, resulting in the same fault being taken forever. As
the task never reaches userspace, the signal is not delivered, and the
task is left unkillable. While the task is stuck in this state, it can
inhibit the forward progress of the system.

To avoid this, we must ensure that when a fatal signal is pending, we
apply any necessary fixup for a faulting kernel instruction. Thus we
will return to an error path, and it is up to that code to make forward
progress towards delivering the fatal signal.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Steve Capper <steve.capper@arm.com>
Tested-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

There are some tricky dependencies between the different stages of
flushing the FPSIMD register state during exec, and these can race
with context switch in ways that can cause the old task's regs to
leak across.  In particular, a context switch during the memset() can
cause some of the task's old FPSIMD registers to reappear.

Disabling preemption for this small window would be no big deal for
performance: preemption is already disabled for similar scenarios
like updating the FPSIMD registers in sigreturn.

So, instead of rearranging things in ways that might swap existing
subtle bugs for new ones, this patch just disables preemption
around the FPSIMD state flushing so that races of this type can't
occur here.  This brings fpsimd_flush_thread() into line with other
code paths.

Cc: stable@vger.kernel.org
Fixes: 674c242c ("arm64: flush FP/SIMD state correctly after execve()")
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>