- 23 Nov, 2022 1 commit
-
-
Johannes Weiner authored
During proactive reclaim, we sometimes observe severe overreclaim, with several thousand times more pages reclaimed than requested. This trace was obtained from shrink_lruvec() during such an instance: prio:0 anon_cost:1141521 file_cost:7767 nr_reclaimed:4387406 nr_to_reclaim:1047 (or_factor:4190) nr=[7161123 345 578 1111] While he reclaimer requested 4M, vmscan reclaimed close to 16G, most of it by swapping. These requests take over a minute, during which the write() to memory.reclaim is unkillably stuck inside the kernel. Digging into the source, this is caused by the proportional reclaim bailout logic. This code tries to resolve a fundamental conflict: to reclaim roughly what was requested, while also aging all LRUs fairly and in accordance to their size, swappiness, refault rates etc. The way it attempts fairness is that once the reclaim goal has been reached, it stops scanning the LRUs with the smaller remaining scan targets, and adjusts the remainder of the bigger LRUs according to how much of the smaller LRUs was scanned. It then finishes scanning that remainder regardless of the reclaim goal. This works fine if priority levels are low and the LRU lists are comparable in size. However, in this instance, the cgroup that is targeted by proactive reclaim has almost no files left - they've already been squeezed out by proactive reclaim earlier - and the remaining anon pages are hot. Anon rotations cause the priority level to drop to 0, which results in reclaim targeting all of anon (a lot) and all of file (almost nothing). By the time reclaim decides to bail, it has scanned most or all of the file target, and therefor must also scan most or all of the enormous anon target. This target is thousands of times larger than the reclaim goal, thus causing the overreclaim. The bailout code hasn't changed in years, why is this failing now? The most likely explanations are two other recent changes in anon reclaim: 1. Before the series starting with commit 5df74196 ("mm: fix LRU balancing effect of new transparent huge pages"), the VM was overall relatively reluctant to swap at all, even if swap was configured. This means the LRU balancing code didn't come into play as often as it does now, and mostly in high pressure situations where pronounced swap activity wouldn't be as surprising. 2. For historic reasons, shrink_lruvec() loops on the scan targets of all LRU lists except the active anon one, meaning it would bail if the only remaining pages to scan were active anon - even if there were a lot of them. Before the series starting with commit ccc5dc67 ("mm/vmscan: make active/inactive ratio as 1:1 for anon lru"), most anon pages would live on the active LRU; the inactive one would contain only a handful of preselected reclaim candidates. After the series, anon gets aged similarly to file, and the inactive list is the default for new anon pages as well, making it often the much bigger list. As a result, the VM is now more likely to actually finish large anon targets than before. Change the code such that only one SWAP_CLUSTER_MAX-sized nudge toward the larger LRU lists is made before bailing out on a met reclaim goal. This fixes the extreme overreclaim problem. Fairness is more subtle and harder to evaluate. No obvious misbehavior was observed on the test workload, in any case. Conceptually, fairness should primarily be a cumulative effect from regular, lower priority scans. Once the VM is in trouble and needs to escalate scan targets to make forward progress, fairness needs to take a backseat. This is also acknowledged by the myriad exceptions in get_scan_count(). This patch makes fairness decrease gradually, as it keeps fairness work static over increasing priority levels with growing scan targets. This should make more sense - although we may have to re-visit the exact values. Link: https://lkml.kernel.org/r/20220802162811.39216-1-hannes@cmpxchg.orgSigned-off-by:Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Rik van Riel <riel@surriel.com> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
- 08 Nov, 2022 22 commits
-
-
Alexander Potapenko authored
Add a blank line to make the sentence before the list render as a separate paragraph, not a definition. Link: https://lkml.kernel.org/r/20221107142255.4038811-1-glider@google.com Fixes: 93858ae7 ("kmsan: add ReST documentation") Signed-off-by:
Alexander Potapenko <glider@google.com> Suggested-by:
Bagas Sanjaya <bagasdotme@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
SeongJae Park authored
A user could write a name of a file under 'damon/' debugfs directory, which is not a user-created context, to 'rm_contexts' file. In the case, 'dbgfs_rm_context()' just assumes it's the valid DAMON context directory only if a file of the name exist. As a result, invalid memory access could happen as below. Fix the bug by checking if the given input is for a directory. This check can filter out non-context inputs because directories under 'damon/' debugfs directory can be created via only 'mk_contexts' file. This bug has found by syzbot[1]. [1] https://lore.kernel.org/damon/000000000000ede3ac05ec4abf8e@google.com/ Link: https://lkml.kernel.org/r/20221107165001.5717-2-sj@kernel.org Fixes: 75c1c2b5 ("mm/damon/dbgfs: support multiple contexts") Signed-off-by:
SeongJae Park <sj@kernel.org> Reported-by: syzbot+6087eafb76a94c4ac9eb@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> [5.15.x] Signed-off-by:
-
Liam Howlett authored
In RCU mode, the node limits were being updated to the last pivot which may not be correct and would cause the metadata to be set when it shouldn't. Fix this by not setting a new limit in this case. Link: https://lkml.kernel.org/r/20221107163857.867377-1-Liam.Howlett@oracle.comSigned-off-by:
Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by:
-
Liam Howlett authored
It is possible to confuse the depth tracking in the maple state by searching the same node for values. Fix the depth tracking by moving where the depth is incremented closer to where the node changes level. Also change the initial depth setting when using the root node. Link: https://lkml.kernel.org/r/20221107163814.866612-1-Liam.Howlett@oracle.comSigned-off-by:
-
Naoya Horiguchi authored
The following bug is reported to be triggered when starting X on x86-32 system with i915: [ 225.777375] kernel BUG at mm/memory.c:2664! [ 225.777391] invalid opcode: 0000 [#1] PREEMPT SMP [ 225.777405] CPU: 0 PID: 2402 Comm: Xorg Not tainted 6.1.0-rc3-bdg+ #86 [ 225.777415] Hardware name: /8I865G775-G, BIOS F1 08/29/2006 [ 225.777421] EIP: __apply_to_page_range+0x24d/0x31c [ 225.777437] Code: ff ff 8b 55 e8 8b 45 cc e8 0a 11 ec ff 89 d8 83 c4 28 5b 5e 5f 5d c3 81 7d e0 a0 ef 96 c1 74 ad 8b 45 d0 e8 2d 83 49 00 eb a3 <0f> 0b 25 00 f0 ff ff 81 eb 00 00 00 40 01 c3 8b 45 ec 8b 00 e8 76 [ 225.777446] EAX: 00000001 EBX: c53a3b58 ECX: b5c00000 EDX: c258aa00 [ 225.777454] ESI: b5c00000 EDI: b5900000 EBP: c4b0fdb4 ESP: c4b0fd80 [ 225.777462] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00010202 [ 225.777470] CR0: 80050033 CR2: b5900000 CR3: 053a3000 CR4: 000006d0 [ 225.777479] Call Trace: [ 225.777486] ? i915_memcpy_init_early+0x63/0x63 [i915] [ 225.777684] apply_to_page_range+0x21/0x27 [ 225.777694] ? i915_memcpy_init_early+0x63/0x63 [i915] [ 225.777870] remap_io_mapping+0x49/0x75 [i915] [ 225.778046] ? i915_memcpy_init_early+0x63/0x63 [i915] [ 225.778220] ? mutex_unlock+0xb/0xd [ 225.778231] ? i915_vma_pin_fence+0x6d/0xf7 [i915] [ 225.778420] vm_fault_gtt+0x2a9/0x8f1 [i915] [ 225.778644] ? lock_is_held_type+0x56/0xe7 [ 225.778655] ? lock_is_held_type+0x7a/0xe7 [ 225.778663] ? 0xc1000000 [ 225.778670] __do_fault+0x21/0x6a [ 225.778679] handle_mm_fault+0x708/0xb21 [ 225.778686] ? mt_find+0x21e/0x5ae [ 225.778696] exc_page_fault+0x185/0x705 [ 225.778704] ? doublefault_shim+0x127/0x127 [ 225.778715] handle_exception+0x130/0x130 [ 225.778723] EIP: 0xb700468a Recently pud_huge() got aware of non-present entry by commit 3a194f3f ("mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present pud entry") to handle some special states of gigantic page. However, it's overlooked that pud_none() always returns false when running with 2-level paging, and as a result pud_huge() can return true pointlessly. Introduce "#if CONFIG_PGTABLE_LEVELS > 2" to pud_huge() to deal with this. Link: https://lkml.kernel.org/r/20221107021010.2449306-1-naoya.horiguchi@linux.dev Fixes: 3a194f3f ("mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present pud entry") Signed-off-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by:
Miaohe Lin <linmiaohe@huawei.com> Cc: David Hildenbrand <david@redhat.com> Cc: Liu Shixin <liushixin2@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Johannes Weiner authored
When psi annotations were added to to btrfs compression reads, the psi state tracking over add_ra_bio_pages and btrfs_submit_compressed_read was faulty. A pressure state, once entered, is never left. This results in incorrectly elevated pressure, which triggers OOM kills. pflags record the *previous* memstall state when we enter a new one. The code tried to initialize pflags to 1, and then optimize the leave call when we either didn't enter a memstall, or were already inside a nested stall. However, there can be multiple PageWorkingset pages in the bio, at which point it's that path itself that enters repeatedly and overwrites pflags. This causes us to miss the exit. Enter the stall only once if needed, then unwind correctly. erofs has the same problem, fix that up too. And move the memstall exit past submit_bio() to restore submit accounting originally added by b8e24a93 ("block: annotate refault stalls from IO submission"). Link: https://lkml.kernel.org/r/Y2UHRqthNUwuIQGS@cmpxchg.org Fixes: 4088a47e ("btrfs: add manual PSI accounting for compressed reads") Fixes: 99486c51 ("erofs: add manual PSI accounting for the compressed address space") Fixes: 118f3663 ("block: remove PSI accounting from the bio layer") Link: https://lore.kernel.org/r/d20a0a85-e415-cf78-27f9-77dd7a94bc8d@leemhuis.info/Signed-off-by:
Thorsten Leemhuis <linux@leemhuis.info> Tested-by:
-
Ryusuke Konishi authored
If a nilfs2 filesystem is downgraded to read-only due to metadata corruption on disk and is remounted read/write, or if emergency read-only remount is performed, detaching a log writer and synchronizing the filesystem can be done at the same time. In these cases, use-after-free of the log writer (hereinafter nilfs->ns_writer) can happen as shown in the scenario below: Task1 Task2 -------------------------------- ------------------------------ nilfs_construct_segment nilfs_segctor_sync init_wait init_waitqueue_entry add_wait_queue schedule nilfs_remount (R/W remount case) nilfs_attach_log_writer nilfs_detach_log_writer nilfs_segctor_destroy kfree finish_wait _raw_spin_lock_irqsave __raw_spin_lock_irqsave do_raw_spin_lock debug_spin_lock_before <-- use-after-free While Task1 is sleeping, nilfs->ns_writer is freed by Task2. After Task1 waked up, Task1 accesses nilfs->ns_writer which is already freed. This scenario diagram is based on the Shigeru Yoshida's post [1]. This patch fixes the issue by not detaching nilfs->ns_writer on remount so that this UAF race doesn't happen. Along with this change, this patch also inserts a few necessary read-only checks with superblock instance where only the ns_writer pointer was used to check if the filesystem is read-only. Link: https://syzkaller.appspot.com/bug?id=79a4c002e960419ca173d55e863bd09e8112df8b Link: https://lkml.kernel.org/r/20221103141759.1836312-1-syoshida@redhat.com [1] Link: https://lkml.kernel.org/r/20221104142959.28296-1-konishi.ryusuke@gmail.comSigned-off-by:Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+f816fa82f8783f7a02bb@syzkaller.appspotmail.com Reported-by:
Shigeru Yoshida <syoshida@redhat.com> Tested-by:
-
Alexander Potapenko authored
There is a case in exc_invalid_op handler that is executed outside the irqentry_enter()/irqentry_exit() region when an UD2 instruction is used to encode a call to __warn(). In that case the `struct pt_regs` passed to the interrupt handler is never unpoisoned by KMSAN (this is normally done in irqentry_enter()), which leads to false positives inside handle_bug(). Use kmsan_unpoison_entry_regs() to explicitly unpoison those registers before using them. Link: https://lkml.kernel.org/r/20221102110611.1085175-5-glider@google.comSigned-off-by:
-
Alexander Potapenko authored
As pointed out by Peter Zijlstra, __msan_poison_alloca() does not play well with IRQ code when PREEMPT_RT is on, because in that mode even GFP_ATOMIC allocations cannot be performed. Fixing this would require making stackdepot completely lockless, which is quite challenging and may be excessive for the time being. Instead, make sure KMSAN is incompatible with PREEMPT_RT, like other debug configs are. Link: https://lkml.kernel.org/r/20221102110611.1085175-4-glider@google.com Link: https://lore.kernel.org/lkml/20221025221755.3810809-1-glider@google.com/Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Alexander Potapenko authored
As pointed out by Masahiro Yamada, Kconfig picks up the first default entry which has true 'if' condition. Hence, the previously added check for KMSAN was never used, because it followed the checks for 64BIT and !64BIT. Put KMSAN check before others to ensure it is always applied. Link: https://lkml.kernel.org/r/20221102110611.1085175-3-glider@google.com Link: https://github.com/google/kmsan/issues/89 Link: https://lore.kernel.org/linux-mm/20221024212144.2852069-3-glider@google.com/ Fixes: 921757bc ("Kconfig.debug: disable CONFIG_FRAME_WARN for KMSAN by default") Signed-off-by:
-
Alexander Potapenko authored
Make sure usercopy hooks from linux/instrumented.h are invoked for copy_from_user_nmi(). This fixes KMSAN false positives reported when dumping opcodes for a stack trace. Link: https://lkml.kernel.org/r/20221102110611.1085175-2-glider@google.comSigned-off-by:
-
Alexander Potapenko authored
Without that, every call to __msan_poison_alloca() in NMI may end up allocating memory, which is NMI-unsafe. Link: https://lkml.kernel.org/r/20221102110611.1085175-1-glider@google.com Link: https://lore.kernel.org/lkml/20221025221755.3810809-1-glider@google.com/Signed-off-by:
-
Vasily Gorbik authored
The kernel test robot reported build failures with a 'randconfig' on s390: >> mm/hugetlb_vmemmap.c:421:11: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes] core_param(hugetlb_free_vmemmap, vmemmap_optimize_enabled, bool, 0); ^ Link: https://lore.kernel.org/linux-mm/202210300751.rG3UDsuc-lkp@intel.com/ Link: https://lkml.kernel.org/r/patch.git-296b83ca939b.your-ad-here.call-01667411912-ext-5073@work.hours Fixes: 30152245 ("mm: hugetlb_vmemmap: replace early_param() with core_param()") Signed-off-by:Vasily Gorbik <gor@linux.ibm.com> Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Peter Xu authored
mfill_atomic_install_pte() checks page->mapping to detect whether one page is used in the page cache. However as pointed out by Matthew, the page can logically be a tail page rather than always the head in the case of uffd minor mode with UFFDIO_CONTINUE. It means we could wrongly install one pte with shmem thp tail page assuming it's an anonymous page. It's not that clear even for anonymous page, since normally anonymous pages also have page->mapping being setup with the anon vma. It's safe here only because the only such caller to mfill_atomic_install_pte() is always passing in a newly allocated page (mcopy_atomic_pte()), whose page->mapping is not yet setup. However that's not extremely obvious either. For either of above, use page_mapping() instead. Link: https://lkml.kernel.org/r/Y2K+y7wnhC4vbnP2@x1n Fixes: 15313257 ("userfaultfd/shmem: support UFFDIO_CONTINUE for shmem") Signed-off-by:
Peter Xu <peterx@redhat.com> Reported-by:
Matthew Wilcox <willy@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Pankaj Gupta authored
virtio_pmem use devm_memremap_pages() to map the device memory. By default this memory is mapped as encrypted with SEV. Guest reboot changes the current encryption key and guest no longer properly decrypts the FSDAX device meta data. Mark the corresponding device memory region for FSDAX devices (mapped with memremap_pages) as decrypted to retain the persistent memory property. Link: https://lkml.kernel.org/r/20221102160728.3184016-1-pankaj.gupta@amd.com Fixes: b7b3c01b ("mm/memremap_pages: support multiple ranges per invocation") Signed-off-by:
Pankaj Gupta <pankaj.gupta@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Peter Xu authored
Anatoly Pugachev reported sparc64 breakage on the patch: https://lore.kernel.org/r/20221021160603.GA23307@u164.east.ru The sparc64 impl of pte_mkdirty() is definitely slightly special in that it leverages a code patching mechanism for sun4u/sun4v on relevant pgtable entry operations. Before having a clue of why the sparc64 is special and caused the patch to SIGSEGV the processes, revert the patch for now. The swap path of dirty bit inheritage is kept because that's using the swap shared code so we assume it'll not be affected. Link: https://lkml.kernel.org/r/Y1Wbi4yyVvDtg4zN@x1n Fixes: 0ccf7f16 ("mm/thp: carry over dirty bit when thp splits on pmd") Signed-off-by:
-
Ryusuke Konishi authored
A semaphore deadlock can occur if nilfs_get_block() detects metadata corruption while locating data blocks and a superblock writeback occurs at the same time: task 1 task 2 ------ ------ * A file operation * nilfs_truncate() nilfs_get_block() down_read(rwsem A) <-- nilfs_bmap_lookup_contig() ... generic_shutdown_super() nilfs_put_super() * Prepare to write superblock * down_write(rwsem B) <-- nilfs_cleanup_super() * Detect b-tree corruption * nilfs_set_log_cursor() nilfs_bmap_convert_error() nilfs_count_free_blocks() __nilfs_error() down_read(rwsem A) <-- nilfs_set_error() down_write(rwsem B) <-- *** DEADLOCK *** Here, nilfs_get_block() readlocks rwsem A (= NILFS_MDT(dat_inode)->mi_sem) and then calls nilfs_bmap_lookup_contig(), but if it fails due to metadata corruption, __nilfs_error() is called from nilfs_bmap_convert_error() inside the lock section. Since __nilfs_error() calls nilfs_set_error() unless the filesystem is read-only and nilfs_set_error() attempts to writelock rwsem B (= nilfs->ns_sem) to write back superblock exclusively, hierarchical lock acquisition occurs in the order rwsem A -> rwsem B. Now, if another task starts updating the superblock, it may writelock rwsem B during the lock sequence above, and can deadlock trying to readlock rwsem A in nilfs_count_free_blocks(). However, there is actually no need to take rwsem A in nilfs_count_free_blocks() because it, within the lock section, only reads a single integer data on a shared struct with nilfs_sufile_get_ncleansegs(). This has been the case after commit aa474a22 ("nilfs2: add local variable to cache the number of clean segments"), that is, even before this bug was introduced. So, this resolves the deadlock problem by just not taking the semaphore in nilfs_count_free_blocks(). Link: https://lkml.kernel.org/r/20221029044912.9139-1-konishi.ryusuke@gmail.com Fixes: e828949e ("nilfs2: call nilfs_error inside bmap routines") Signed-off-by: -
Li Zetao authored
There is a memory leak reported by kmemleak: unreferenced object 0xffff88817231ce40 (size 224): comm "mount.cifs", pid 19308, jiffies 4295917571 (age 405.880s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 60 c0 b2 00 81 88 ff ff 98 83 01 42 81 88 ff ff `..........B.... backtrace: [<ffffffff81936171>] __alloc_file+0x21/0x250 [<ffffffff81937051>] alloc_empty_file+0x41/0xf0 [<ffffffff81937159>] alloc_file+0x59/0x710 [<ffffffff81937964>] alloc_file_pseudo+0x154/0x210 [<ffffffff81741dbf>] __shmem_file_setup+0xff/0x2a0 [<ffffffff817502cd>] shmem_zero_setup+0x8d/0x160 [<ffffffff817cc1d5>] mmap_region+0x1075/0x19d0 [<ffffffff817cd257>] do_mmap+0x727/0x1110 [<ffffffff817518b2>] vm_mmap_pgoff+0x112/0x1e0 [<ffffffff83adf955>] do_syscall_64+0x35/0x80 [<ffffffff83c0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 The root cause was traced to an error handing path in mmap_region() when arch_validate_flags() or mas_preallocate() fails. In the shared anonymous mapping sence, vma will be setuped and mapped with a new shared anonymous file via shmem_zero_setup(). So in this case, the file resource needs to be released. Fix it by calling fput(vma->vm_file) and unmap_region() when arch_validate_flags() or mas_preallocate() returns an error in the shared anonymous mapping sence. Link: https://lkml.kernel.org/r/20221028073717.1179380-1-lizetao1@huawei.com Fixes: d4af56c5 ("mm: start tracking VMAs with maple tree") Fixes: c462ac28 ("mm: Introduce arch_validate_flags()") Signed-off-by:Li Zetao <lizetao1@huawei.com> Reviewed-by:
-
James Houghton authored
This change is very similar to the change that was made for shmem [1], and it solves the same problem but for HugeTLBFS instead. Currently, when poison is found in a HugeTLB page, the page is removed from the page cache. That means that attempting to map or read that hugepage in the future will result in a new hugepage being allocated instead of notifying the user that the page was poisoned. As [1] states, this is effectively memory corruption. The fix is to leave the page in the page cache. If the user attempts to use a poisoned HugeTLB page with a syscall, the syscall will fail with EIO, the same error code that shmem uses. For attempts to map the page, the thread will get a BUS_MCEERR_AR SIGBUS. [1]: commit a7605426 ("mm: shmem: don't truncate page if memory failure happens") Link: https://lkml.kernel.org/r/20221018200125.848471-1-jthoughton@google.comSigned-off-by:
James Houghton <jthoughton@google.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
Yang Shi <shy828301@gmail.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: James Houghton <jthoughton@google.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Liam Howlett authored
Along the development cycle, the testing code support for module/in-kernel compiles was removed. Restore this functionality by moving any internal API tests to the userspace side, as well as threading tests. Fix the lockdep issues and add a way to reduce memory usage so the tests can complete with KASAN + memleak detection. Make the tests work on 32 bit hosts where possible and detect 32 bit hosts in the radix test suite. [akpm@linux-foundation.org: fix module export] [akpm@linux-foundation.org: fix it some more] [liam.howlett@oracle.com: fix compile warnings on 32bit build in check_find()] Link: https://lkml.kernel.org/r/20221107203816.1260327-1-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20221028180415.3074673-1-Liam.Howlett@oracle.comSigned-off-by:
-
Liam Howlett authored
clang-analyzer reported some Dead Stores in mas_anode_descend(). Upon inspection, there were a few clean ups that would make the code cleaner: The count variable was set from the mt_slots array and then updated but never used again. Just use the array reference directly. Also stop updating the type since it isn't used after the update. Stop setting the gaps pointer to NULL at the start since it is always set before the loop begins. Link: https://lkml.kernel.org/r/20221026151413.4032730-1-Liam.Howlett@oracle.comSigned-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Liam Howlett authored
There is a more direct and cleaner way of implementing the same functional code. Remove the confusing and unnecessary use of pointers here. Link: https://lkml.kernel.org/r/20221026151241.4031117-1-Liam.Howlett@oracle.comSigned-off-by:
-
- 06 Nov, 2022 17 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds authored
Pull cxl fixes from Dan Williams: "Several fixes for CXL region creation crashes, leaks and failures. This is mainly fallout from the original implementation of dynamic CXL region creation (instantiate new physical memory pools) that arrived in v6.0-rc1. Given the theme of "failures in the presence of pass-through decoders" this also includes new regression test infrastructure for that case. Summary: - Fix region creation crash with pass-through decoders - Fix region creation crash when no decoder allocation fails - Fix region creation crash when scanning regions to enforce the increasing physical address order constraint that CXL mandates - Fix a memory leak for cxl_pmem_region objects, track 1:N instead of 1:1 memory-device-to-region associations. - Fix a memory leak for cxl_region objects when regions with active targets are deleted - Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window) emulated proximity domains. - Fix region creation failure for switch attached devices downstream of a single-port host-bridge - Fix false positive memory leak of cxl_region objects by recycling recently used region ids rather than freeing them - Add regression test infrastructure for a pass-through decoder configuration - Fix some mailbox payload handling corner cases" * tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/region: Recycle region ids cxl/region: Fix 'distance' calculation with passthrough ports tools/testing/cxl: Add a single-port host-bridge regression config tools/testing/cxl: Fix some error exits cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak cxl/region: Fix cxl_region leak, cleanup targets at region delete cxl/region: Fix region HPA ordering validation cxl/pmem: Use size_add() against integer overflow cxl/region: Fix decoder allocation crash ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set cxl/pmem: Fix failure to account for 8 byte header for writes to the device LSA. cxl/region: Fix null pointer dereference due to pass through decoder commit cxl/mbox: Add a check on input payload size -
Linus Torvalds authored
Merge tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix two regressions: - Commit 54cc3dbf ("hwmon: (pmbus) Add regulator supply into macro") resulted in regulator undercount when disabling regulators. Revert it. - The thermal subsystem rework caused the scmi driver to no longer register with the thermal subsystem because index values no longer match. To fix the problem, the scmi driver now directly registers with the thermal subsystem, no longer through the hwmon core" * tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: Revert "hwmon: (pmbus) Add regulator supply into macro" hwmon: (scmi) Register explicitly with Thermal Framework
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Add Cooper Lake's stepping to the PEBS guest/host events isolation fixed microcode revisions checking quirk - Update Icelake and Sapphire Rapids events constraints - Use the standard energy unit for Sapphire Rapids in RAPL - Fix the hw_breakpoint test to fail more graciously on !SMP configs * tag 'perf_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Add Cooper Lake stepping to isolation_ucodes[] perf/x86/intel: Fix pebs event constraints for SPR perf/x86/intel: Fix pebs event constraints for ICL perf/x86/rapl: Use standard Energy Unit for SPR Dram RAPL domain perf/hw_breakpoint: test: Skip the test if dependencies unmet
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Add new Intel CPU models - Enforce that TDX guests are successfully loaded only on TDX hardware where virtualization exception (#VE) delivery on kernel memory is disabled because handling those in all possible cases is "essentially impossible" - Add the proper include to the syscall wrappers so that BTF can see the real pt_regs definition and not only the forward declaration * tag 'x86_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add several Intel server CPU model numbers x86/tdx: Panic on bad configs that #VE on "private" memory access x86/tdx: Prepare for using "INFO" call for a second purpose x86/syscall: Include asm/ptrace.h in syscall_wrapper header
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Use POSIX-compatible grep options - Document git-related tips for reproducible builds - Fix a typo in the modpost rule - Suppress SIGPIPE error message from gcc-ar and llvm-ar - Fix segmentation fault in the menuconfig search * tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: fix segmentation fault in menuconfig search kbuild: fix SIGPIPE error message for AR=gcc-ar and AR=llvm-ar kbuild: fix typo in modpost Documentation: kbuild: Add description of git for reproducible builds kbuild: use POSIX-compatible grep option
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM: - Fix the pKVM stage-1 walker erronously using the stage-2 accessor - Correctly convert vcpu->kvm to a hyp pointer when generating an exception in a nVHE+MTE configuration - Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them - Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE - Document the boot requirements for FGT when entering the kernel at EL1 x86: - Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit() - Make argument order consistent for kvcalloc() - Userspace API fixes for DEBUGCTL and LBRs" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Fix a typo about the usage of kvcalloc() KVM: x86: Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit() KVM: VMX: Ignore guest CPUID for host userspace writes to DEBUGCTL KVM: VMX: Fold vmx_supported_debugctl() into vcpu_supported_debugctl() KVM: VMX: Advertise PMU LBRs if and only if perf supports LBRs arm64: booting: Document our requirements for fine grained traps with SME KVM: arm64: Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE KVM: Check KVM_CAP_DIRTY_LOG_{RING, RING_ACQ_REL} prior to enabling them KVM: arm64: Fix bad dereference on MTE-enabled systems KVM: arm64: Use correct accessor to parse stage-1 PTEs -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "One fix for silencing a smatch warning, and a small cleanup patch" * tag 'for-linus-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: simplify sysenter and syscall setup x86/xen: silence smatch warning in pmu_msr_chk_emulated()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Fix a number of bugs, including some regressions, the most serious of which was one which would cause online resizes to fail with file systems with metadata checksums enabled. Also fix a warning caused by the newly added fortify string checker, plus some bugs that were found using fuzzed file systems" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix fortify warning in fs/ext4/fast_commit.c:1551 ext4: fix wrong return err in ext4_load_and_init_journal() ext4: fix warning in 'ext4_da_release_space' ext4: fix BUG_ON() when directory entry has invalid rec_len ext4: update the backup superblock's at the end of the online resize
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "One symlink handling fix and two fixes foir multichannel issues with iterating channels, including for oplock breaks when leases are disabled" * tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix use-after-free on the link name cifs: avoid unnecessary iteration of tcp sessions cifs: always iterate smb sessions using primary channel
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull `lTracing fixes for 6.1-rc3: - Fixed NULL pointer dereference in the ring buffer wait-waiters code for machines that have less CPUs than what nr_cpu_ids returns. The buffer array is of size nr_cpu_ids, but only the online CPUs get initialized. - Fixed use after free call in ftrace_shutdown. - Fix accounting of if a kprobe is enabled - Fix NULL pointer dereference on error path of fprobe rethook_alloc(). - Fix unregistering of fprobe_kprobe_handler - Fix memory leak in kprobe test module * tag 'trace-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd() tracing/fprobe: Fix to check whether fprobe is registered correctly fprobe: Check rethook_alloc() return in rethook initialization kprobe: reverse kp->flags when arm_kprobe failed ftrace: Fix use-after-free for dynamic ftrace_ops ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters()
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD * Fix the pKVM stage-1 walker erronously using the stage-2 accessor * Correctly convert vcpu->kvm to a hyp pointer when generating an exception in a nVHE+MTE configuration * Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them * Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE * Document the boot requirements for FGT when entering the kernel at EL1
-
Paolo Bonzini authored
x86: * Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit() * Make argument order consistent for kvcalloc() * Userspace API fixes for DEBUGCTL and LBRs
-
Theodore Ts'o authored
With the new fortify string system, rework the memcpy to avoid this warning: memcpy: detected field-spanning write (size 60) of single field "&raw_inode->i_generation" at fs/ext4/fast_commit.c:1551 (size 4) Cc: stable@kernel.org Fixes: 54d9469b ("fortify: Add run-time WARN for cross-field memcpy()") Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Jason Yan authored
The return value is wrong in ext4_load_and_init_journal(). The local variable 'err' need to be initialized before goto out. The original code in __ext4_fill_super() is fine because it has two return values 'ret' and 'err' and 'ret' is initialized as -EINVAL. After we factor out ext4_load_and_init_journal(), this code is broken. So fix it by directly returning -EINVAL in the error handler path. Cc: stable@kernel.org Fixes: 9c1dd22d ("ext4: factor out ext4_load_and_init_journal()") Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221025040206.3134773-1-yanaijie@huawei.comSigned-off-by:
-
Ye Bin authored
Syzkaller report issue as follows: EXT4-fs (loop0): Free/Dirty block details EXT4-fs (loop0): free_blocks=0 EXT4-fs (loop0): dirty_blocks=0 EXT4-fs (loop0): Block reservation details EXT4-fs (loop0): i_reserved_data_blocks=0 EXT4-fs warning (device loop0): ext4_da_release_space:1527: ext4_da_release_space: ino 18, to_free 1 with only 0 reserved data blocks ------------[ cut here ]------------ WARNING: CPU: 0 PID: 92 at fs/ext4/inode.c:1528 ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1524 Modules linked in: CPU: 0 PID: 92 Comm: kworker/u4:4 Not tainted 6.0.0-syzkaller-09423-g493ffd66 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: writeback wb_workfn (flush-7:0) RIP: 0010:ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1528 RSP: 0018:ffffc900015f6c90 EFLAGS: 00010296 RAX: 42215896cd52ea00 RBX: 0000000000000000 RCX: 42215896cd52ea00 RDX: 0000000000000000 RSI: 0000000080000001 RDI: 0000000000000000 RBP: 1ffff1100e907d96 R08: ffffffff816aa79d R09: fffff520002bece5 R10: fffff520002bece5 R11: 1ffff920002bece4 R12: ffff888021fd2000 R13: ffff88807483ecb0 R14: 0000000000000001 R15: ffff88807483e740 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555569ba628 CR3: 000000000c88e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ext4_es_remove_extent+0x1ab/0x260 fs/ext4/extents_status.c:1461 mpage_release_unused_pages+0x24d/0xef0 fs/ext4/inode.c:1589 ext4_writepages+0x12eb/0x3be0 fs/ext4/inode.c:2852 do_writepages+0x3c3/0x680 mm/page-writeback.c:2469 __writeback_single_inode+0xd1/0x670 fs/fs-writeback.c:1587 writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1870 wb_writeback+0x41f/0x7b0 fs/fs-writeback.c:2044 wb_do_writeback fs/fs-writeback.c:2187 [inline] wb_workfn+0x3cb/0xef0 fs/fs-writeback.c:2227 process_one_work+0x877/0xdb0 kernel/workqueue.c:2289 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436 kthread+0x266/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> Above issue may happens as follows: ext4_da_write_begin ext4_create_inline_data ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS); ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA); __ext4_ioctl ext4_ext_migrate -> will lead to eh->eh_entries not zero, and set extent flag ext4_da_write_begin ext4_da_convert_inline_data_to_extent ext4_da_write_inline_data_begin ext4_da_map_blocks ext4_insert_delayed_block if (!ext4_es_scan_clu(inode, &ext4_es_is_delonly, lblk)) if (!ext4_es_scan_clu(inode, &ext4_es_is_mapped, lblk)) ext4_clu_mapped(inode, EXT4_B2C(sbi, lblk)); -> will return 1 allocated = true; ext4_es_insert_delayed_block(inode, lblk, allocated); ext4_writepages mpage_map_and_submit_extent(handle, &mpd, &give_up_on_write); -> return -ENOSPC mpage_release_unused_pages(&mpd, give_up_on_write); -> give_up_on_write == 1 ext4_es_remove_extent ext4_da_release_space(inode, reserved); if (unlikely(to_free > ei->i_reserved_data_blocks)) -> to_free == 1 but ei->i_reserved_data_blocks == 0 -> then trigger warning as above To solve above issue, forbid inode do migrate which has inline data. Cc: stable@kernel.org Reported-by: syzbot+c740bb18df70ad00952e@syzkaller.appspotmail.com Signed-off-by:
Ye Bin <yebin10@huawei.com> Reviewed-by:
-
Luís Henriques authored
The rec_len field in the directory entry has to be a multiple of 4. A corrupted filesystem image can be used to hit a BUG() in ext4_rec_len_to_disk(), called from make_indexed_dir(). ------------[ cut here ]------------ kernel BUG at fs/ext4/ext4.h:2413! ... RIP: 0010:make_indexed_dir+0x53f/0x5f0 ... Call Trace: <TASK> ? add_dirent_to_buf+0x1b2/0x200 ext4_add_entry+0x36e/0x480 ext4_add_nondir+0x2b/0xc0 ext4_create+0x163/0x200 path_openat+0x635/0xe90 do_filp_open+0xb4/0x160 ? __create_object.isra.0+0x1de/0x3b0 ? _raw_spin_unlock+0x12/0x30 do_sys_openat2+0x91/0x150 __x64_sys_open+0x6c/0xa0 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The fix simply adds a call to ext4_check_dir_entry() to validate the directory entry, returning -EFSCORRUPTED if the entry is invalid. CC: stable@kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=216540Signed-off-by:
Luís Henriques <lhenriques@suse.de> Link: https://lore.kernel.org/r/20221012131330.32456-1-lhenriques@suse.deSigned-off-by:
-
