- 05 Nov, 2021 4 commits
-
-
Hangbin Liu authored
The arp request number triggered by ping none exist address is not accurate, which may lead the test false negative/positive. Change to use arping to accurate the arp number. Also do not use grep pattern match for dot. Fixes: d2329247 ("selftests/bpf: Add xdp_redirect_multi test") Suggested-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211027033553.962413-3-liuhangbin@gmail.com
-
Hangbin Liu authored
The xdp_redirect_multi test logs are created in selftest folder and not cleaned after test. Let's creat a tmp dir and remove the logs after testing. Fixes: d2329247 ("selftests/bpf: Add xdp_redirect_multi test") Suggested-by:
-
Mehrdad Arshad Rad authored
Fix bpf_map_lookup_and_delete_elem_flags() to pass the return code through libbpf_err_errno() as we do similarly in bpf_map_lookup_and_delete_elem(). Fixes: f12b6543 ("libbpf: Streamline error reporting for low-level APIs") Signed-off-by:
Mehrdad Arshad Rad <arshad.rad@gmail.com> Signed-off-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20211104171354.11072-1-arshad.rad@gmail.com
-
Quentin Monnet authored
We recently changed bpftool's Makefile to make it install libbpf's headers locally instead of pulling them from the source directory of the library. Although bpftool needs two versions of libbpf, a "regular" one and a "bootstrap" version, we would only install headers for the regular libbpf build. Given that this build always occurs before the bootstrap build when building bpftool, this is enough to ensure that the bootstrap bpftool will have access to the headers exported through the regular libbpf build. However, this did not account for the case when we only want the bootstrap version of bpftool, through the "bootstrap" target. For example, perf needs the bootstrap version only, to generate BPF skeletons. In that case, when are the headers installed? For some time, the issue has been masked, because we had a step (the installation of headers internal to libbpf) which would depend on the regular build of libbpf and hence trigger the export of the headers, just for the sake of creating a directory. But this changed with commit 8b6c4624 ("bpftool: Remove Makefile dep. on $(LIBBPF) for $(LIBBPF_INTERNAL_HDRS)"), where we cleaned up that stage and removed the dependency on the regular libbpf build. As a result, when we only want the bootstrap bpftool version, the regular libbpf is no longer built. The bootstrap libbpf version is built, but headers are not exported, and the bootstrap bpftool build fails because of the missing headers. To fix this, we also install the library headers for the bootstrap version of libbpf, to use them for the bootstrap bpftool and for generating the skeletons. Fixes: f012ade1 ("bpftool: Install libbpf headers instead of including the dir") Reported-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Signed-off-by:
-
- 04 Nov, 2021 1 commit
-
-
Kleber Sacilotto de Souza authored
In some platforms the numa node numbers are not necessarily consecutive, meaning that not all nodes from 0 to the value returned by numa_max_node() are available on the system. Using node numbers which are not available results on errors from libnuma such as: ---- IPv4 UDP ---- send node 0, receive socket 0 libnuma: Warning: Cannot read node cpumask from sysfs ./reuseport_bpf_numa: failed to pin to node: No such file or directory Fix it by checking if the node number bit is set on numa_nodes_ptr, which is defined on libnuma as "Set with all nodes the kernel has exposed to userspace". Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
-
- 03 Nov, 2021 35 commits
-
-
Martin KaFai Lau authored
This patch adds a verifier test to ensure the verifier can read 8 bytes from the stack after two 32bit write at fp-4 and fp-8. The test is similar to the reported case from bcc [0]. [0] https://github.com/iovisor/bcc/pull/3683Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Martin KaFai Lau authored
Below is a simplified case from a report in bcc [0]: r4 = 20 *(u32 *)(r10 -4) = r4 *(u32 *)(r10 -8) = r4 /* r4 state is tracked */ r4 = *(u64 *)(r10 -8) /* Read more than the tracked 32bit scalar. * verifier rejects as 'corrupted spill memory'. */ After commit 354e8f19 ("bpf: Support <8-byte scalar spill and refill"), the 8-byte aligned 32bit spill is also tracked by the verifier and the register state is stored. However, if 8 bytes are read from the stack instead of the tracked 4 byte scalar, then verifier currently rejects the program as "corrupted spill memory". This patch fixes this case by allowing it to read but marks the register as unknown. Also note that, if the prog is trying to corrupt/leak an earlier spilled pointer by spilling another <8 bytes register on top, this has already been rejected in the check_stack_write_fixed_off(). [0] https://github.com/iovisor/bcc/pull/3683 Fixes: 354e8f19 ("bpf: Support <8-byte scalar spill and refill") Reported-by:
Hengqi Chen <hengqi.chen@gmail.com> Reported-by:
Yonghong Song <yhs@gmail.com> Signed-off-by:
-
Andrii Nakryiko authored
When running `./test_progs -j` test_netcnt fails with a very high probability, undercounting number of packets received (9999 vs expected 10000). It seems to be conflicting with other cgroup/skb selftests. So make it serial for now to make parallel mode more robust. Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Signed-off-by:
-
Lorenz Bauer authored
Add tests to exercise the behaviour of RENAME_EXCHANGE and RENAME_NOREPLACE on bpffs. The former checks that after an exchange the inode of two directories has changed. The latter checks that the source still exists after a failed rename. Generally, having support for renameat2(RENAME_EXCHANGE) in bpffs fixes atomic upgrades of our sk_lookup control plane. Signed-off-by:
Lorenz Bauer <lmb@cloudflare.com> Signed-off-by:
-
Lorenz Bauer authored
Remove usage of deprecated CHECK macros. Signed-off-by:
-
Lorenz Bauer authored
Allow atomic exchange via RENAME_EXCHANGE when using simple_rename. This affects binderfs, ramfs, hubetlbfs and bpffs. Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/bpf/20211028094724.59043-3-lmb@cloudflare.com
-
Lorenz Bauer authored
Move shmem_exchange and make it available to other callers. Suggested-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Vladimir Oltean authored
Normally it is expected that the dsa_device_ops :: rcv() method finishes parsing the DSA tag and consumes it, then never looks at it again. But commit c0bcf537 ("net: dsa: ocelot: add hardware timestamping support for Felix") added support for RX timestamping in a very unconventional way. On this switch, a partial timestamp is available in the DSA header, but the driver got away with not parsing that timestamp right away, but instead delayed that parsing for a little longer: dsa_switch_rcv(): nskb = cpu_dp->rcv(skb, dev); <------------- not here -> ocelot_rcv() ... skb = nskb; skb_push(skb, ETH_HLEN); skb->pkt_type = PACKET_HOST; skb->protocol = eth_type_trans(skb, skb->dev); ... if (dsa_skb_defer_rx_timestamp(p, skb)) <--- but here -> felix_rxtstamp() return 0; When in felix_rxtstamp(), this driver accounted for the fact that eth_type_trans() happened in the meanwhile, so it got a hold of the extraction header again by subtracting (ETH_HLEN + OCELOT_TAG_LEN) bytes from the current skb->data. This worked for quite some time but was quite fragile from the very beginning. Not to mention that having DSA tag parsing split in two different files, under different folders (net/dsa/tag_ocelot.c vs drivers/net/dsa/ocelot/felix.c) made it quite non-obvious for patches to come that they might break this. Finally, the blamed commit does the following: at the end of ocelot_rcv(), it checks whether the skb payload contains a VLAN header. If it does, and this port is under a VLAN-aware bridge, that VLAN ID might not be correct in the sense that the packet might have suffered VLAN rewriting due to TCAM rules (VCAP IS1). So we consume the VLAN ID from the skb payload using __skb_vlan_pop(), and take the classified VLAN ID from the DSA tag, and construct a hwaccel VLAN tag with the classified VLAN, and the skb payload is VLAN-untagged. The big problem is that __skb_vlan_pop() does: memmove(skb->data + VLAN_HLEN, skb->data, 2 * ETH_ALEN); __skb_pull(skb, VLAN_HLEN); aka it moves the Ethernet header 4 bytes to the right, and pulls 4 bytes from the skb headroom (effectively also moving skb->data, by definition). So for felix_rxtstamp()'s fragile logic, all bets are off now. Instead of having the "extraction" pointer point to the DSA header, it actually points to 4 bytes _inside_ the extraction header. Corollary, the last 4 bytes of the "extraction" header are in fact 4 stale bytes of the destination MAC address from the Ethernet header, from prior to the __skb_vlan_pop() movement. So of course, RX timestamps are completely bogus when the system is configured in this way. The fix is actually very simple: just don't structure the code like that. For better or worse, the DSA PTP timestamping API does not offer a straightforward way for drivers to present their RX timestamps, but other drivers (sja1105) have established a simple mechanism to carry their RX timestamp from dsa_device_ops :: rcv() all the way to dsa_switch_ops :: port_rxtstamp() and even later. That mechanism is to simply save the partial timestamp to the skb->cb, and complete it later. Question: why don't we simply populate the skb's struct skb_shared_hwtstamps from ocelot_rcv(), and bother with this complication of propagating the timestamp to felix_rxtstamp()? Answer: dsa_switch_ops :: port_rxtstamp() answers the question whether PTP packets need sleepable context to retrieve the full RX timestamp. Currently felix_rxtstamp() answers "no, thanks" to that question, and calls ocelot_ptp_gettime64() from softirq atomic context. This is understandable, since Felix VSC9959 is a PCIe memory-mapped switch, so hardware access does not require sleeping. But the felix driver is preparing for the introduction of other switches where hardware access is over a slow bus like SPI or MDIO: https://lore.kernel.org/lkml/20210814025003.2449143-1-colin.foster@in-advantage.com/ So I would like to keep this code structure, so the rework needed when that driver will need PTP support will be minimal (answer "yes, I need deferred context for this skb's RX timestamp", then the partial timestamp will still be found in the skb->cb. Fixes: ea440cd2 ("net: dsa: tag_ocelot: use VLAN information from tagging header when available") Reported-by:
Po Liu <po.liu@nxp.com> Cc: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ansuel Smith authored
Some device set MAC06 exchange in the bootloader. This cause some problem as we don't support this strange mode and we just set the port6 as the primary CPU port. With MAC06 exchange, PAD0 reg configure port6 instead of port0. Add an extra check and explicitly disable MAC06 exchange to correctly configure the port PAD config. Signed-off-by:
Ansuel Smith <ansuelsmth@gmail.com> Fixes: 3fcf734a ("net: dsa: qca8k: add support for cpu port 6") Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Ziyang Xuan authored
The real_dev of a vlan net_device may be freed after unregister_vlan_dev(). Access the real_dev continually by vlan_dev_real_dev() will trigger the UAF problem for the real_dev like following: ================================================================== BUG: KASAN: use-after-free in vlan_dev_real_dev+0xf9/0x120 Call Trace: kasan_report.cold+0x83/0xdf vlan_dev_real_dev+0xf9/0x120 is_eth_port_of_netdev_filter.part.0+0xb1/0x2c0 is_eth_port_of_netdev_filter+0x28/0x40 ib_enum_roce_netdev+0x1a3/0x300 ib_enum_all_roce_netdevs+0xc7/0x140 netdevice_event_work_handler+0x9d/0x210 ... Freed by task 9288: kasan_save_stack+0x1b/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0xfc/0x130 slab_free_freelist_hook+0xdd/0x240 kfree+0xe4/0x690 kvfree+0x42/0x50 device_release+0x9f/0x240 kobject_put+0x1c8/0x530 put_device+0x1b/0x30 free_netdev+0x370/0x540 ppp_destroy_interface+0x313/0x3d0 ... Move the put_device(real_dev) to vlan_dev_free(). Ensure real_dev not be freed before vlan_dev unregistered. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+e4df4e1389e28972e955@syzkaller.appspotmail.com Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
-
Menglong Dong authored
__UDP_INC_STATS() is used in udpv6_queue_rcv_one_skb() when encap_rcv() fails. __UDP6_INC_STATS() should be used here, so replace it with __UDP6_INC_STATS(). Signed-off-by:
Menglong Dong <imagedong@tencent.com> Signed-off-by:
-
Jakub Kicinski authored
ETHTOOL_A_PAUSE_STAT_MAX is the MAX attribute id, so we need to subtract non-stats and add one to get a count (IOW -2+1 == -1). Otherwise we'll see: ethnl cmd 21: calculated reply length 40, but consumed 52 Fixes: 9a27a330 ("ethtool: add standard pause stats") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Talal Ahmad authored
Track skbs containing only zerocopy data and avoid charging them to kernel memory to correctly account the memory utilization for msg_zerocopy. All of the data in such skbs is held in user pages which are already accounted to user. Before this change, they are charged again in kernel in __zerocopy_sg_from_iter. The charging in kernel is excessive because data is not being copied into skb frags. This excessive charging can lead to kernel going into memory pressure state which impacts all sockets in the system adversely. Mark pure zerocopy skbs with a SKBFL_PURE_ZEROCOPY flag and remove charge/uncharge for data in such skbs. Initially, an skb is marked pure zerocopy when it is empty and in zerocopy path. skb can then change from a pure zerocopy skb to mixed data skb (zerocopy and copy data) if it is at tail of write queue and there is room available in it and non-zerocopy data is being sent in the next sendmsg call. At this time sk_mem_charge is done for the pure zerocopied data and the pure zerocopy flag is unmarked. We found that this happens very rarely on workloads that pass MSG_ZEROCOPY. A pure zerocopy skb can later be coalesced into normal skb if they are next to each other in queue but this patch prevents coalescing from happening. This avoids complexity of charging when skb downgrades from pure zerocopy to mixed. This is also rare. In sk_wmem_free_skb, if it is a pure zerocopy skb, an sk_mem_uncharge for SKB_TRUESIZE(skb_end_offset(skb)) is done for sk_mem_charge in tcp_skb_entail for an skb without data. Testing with the msg_zerocopy.c benchmark between two hosts(100G nics) with zerocopy showed that before this patch the 'sock' variable in memory.stat for cgroup2 that tracks sum of sk_forward_alloc, sk_rmem_alloc and sk_wmem_queued is around 1822720 and with this change it is 0. This is due to no charge to sk_forward_alloc for zerocopy data and shows memory utilization for kernel is lowered. With this commit we don't see the warning we saw in previous commit which resulted in commit 84882cf7. Signed-off-by:
Talal Ahmad <talalahmad@google.com> Acked-by:
Arjun Roy <arjunroy@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Zhang Mingyu authored
Eliminate the following coccinelle check warning: net/ipv6/seg6.c:381:2-3 Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Zhang Mingyu <zhang.mingyu@zte.com.cn> Signed-off-by:
-
Lin Ma authored
The CAP_NET_ADMIN checks are needed to prevent attackers faking a device under NCIUARTSETDRIVER and exploit privileged commands. This patch add GENL_ADMIN_PERM flags in genl_ops to fulfill the check. Except for commands like NFC_CMD_GET_DEVICE, NFC_CMD_GET_TARGET, NFC_CMD_LLC_GET_PARAMS, and NFC_CMD_GET_SE, which are mainly information- read operations. Signed-off-by:
Lin Ma <linma@zju.edu.cn> Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== security: fixups for the security hooks in sctp There are a couple of problems in the currect security hooks in sctp: 1. The hooks incorrectly treat sctp_endpoint in SCTP as request_sock in TCP, while it's in fact no more than an extension of the sock, and represents the local host. It is created when sock is created, not when a conn request comes. sctp_association is actually the correct one to represent the connection, and created when a conn request arrives. 2. security_sctp_assoc_request() hook should also be called in processing COOKIE ECHO, as that's the place where the real assoc is created and used in the future. The problems above may cause accept sk, peeloff sk or client sk having the incorrect security labels. So this patchset is to change some hooks and pass asoc into them and save these secids into asoc, as well as add the missing sctp_assoc_request hook into the COOKIE ECHO processing. v1->v2: - See each patch, and thanks the help from Ondrej, Paul and Richard. ==================== Signed-off-by: -
Xin Long authored
Different from selinux_inet_conn_established(), it also gives the secid to asoc->peer_secid in selinux_sctp_assoc_established(), as one UDP-type socket may have more than one asocs. Note that peer_secid in asoc will save the peer secid for this asoc connection, and peer_sid in sksec will just keep the peer secid for the latest connection. So the right use should be do peeloff for UDP-type socket if there will be multiple asocs in one socket, so that the peeloff socket has the right label for its asoc. v1->v2: - call selinux_inet_conn_established() to reduce some code duplication in selinux_sctp_assoc_established(), as Ondrej suggested. - when doing peeloff, it calls sock_create() where it actually gets secid for socket from socket_sockcreate_sid(). So reuse SECSID_WILD to ensure the peeloff socket keeps using that secid after calling selinux_sctp_sk_clone() for client side. Fixes: 72e89f50 ("security: Add support for SCTP security hooks") Reported-by:Prashanth Prahlad <pprahlad@redhat.com> Reviewed-by:
Richard Haines <richard_c_haines@btinternet.com> Tested-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
security_sctp_assoc_established() is added to replace security_inet_conn_established() called in sctp_sf_do_5_1E_ca(), so that asoc can be accessed in security subsystem and save the peer secid to asoc->peer_secid. v1->v2: - fix the return value of security_sctp_assoc_established() in security.h, found by kernel test robot and Ondrej. Fixes: 72e89f50 ("security: Add support for SCTP security hooks") Reported-by: -
Xin Long authored
The asoc created when receives the INIT chunk is a temporary one, it will be deleted after INIT_ACK chunk is replied. So for the real asoc created in sctp_sf_do_5_1D_ce() when the COOKIE_ECHO chunk is received, security_sctp_assoc_request() should also be called. v1->v2: - fix some typo and grammar errors, noticed by Ondrej. Fixes: 72e89f50 ("security: Add support for SCTP security hooks") Reported-by:
-
Xin Long authored
This patch is to move secid and peer_secid from endpoint to association, and pass asoc to sctp_assoc_request and sctp_sk_clone instead of ep. As ep is the local endpoint and asoc represents a connection, and in SCTP one sk/ep could have multiple asoc/connection, saving secid/peer_secid for new asoc will overwrite the old asoc's. Note that since asoc can be passed as NULL, security_sctp_assoc_request() is moved to the place right after the new_asoc is created in sctp_sf_do_5_1B_init() and sctp_sf_do_unexpected_init(). v1->v2: - fix the description of selinux_netlbl_skbuff_setsid(), as Jakub noticed. - fix the annotation in selinux_sctp_assoc_request(), as Richard Noticed. Fixes: 72e89f50 ("security: Add support for SCTP security hooks") Reported-by:
-
David S. Miller authored
Hangbin Liu says: ==================== kselftests/net: add missed tests to Makefile When generating the selftest to another folder, some tests are missing as they are not added in Makefile. e.g. make -C tools/testing/selftests/ install \ TARGETS="net" INSTALL_PATH=/tmp/kselftests These pathset add them separately to make the Fixes tags less. It would also make the stable tree or downstream backport easier. If you think there is no need to add the Fixes tag for this minor issue. I can repost a new patch and merge all the fixes together. Thanks v3: no update, just rebase to latest net tree. v2: move toeplitz.sh/toeplitz_client.sh under TEST_PROGS_EXTENDED. ==================== Signed-off-by: -
Hangbin Liu authored
When generating the selftests to another folder, the toeplitz.sh and toeplitz_client.sh are missing as they are not in Makefile, e.g. make -C tools/testing/selftests/ install \ TARGETS="net" INSTALL_PATH=/tmp/kselftests Making them under TEST_PROGS_EXTENDED as they test NIC hardware features and are not intended to be run from kselftests. Fixes: 5ebfb4cc ("selftests/net: toeplitz test") Reviewed-by: -
Hangbin Liu authored
When generating the selftests to another folder, the vrf_strict_mode_test.sh test will miss as it is not in Makefile, e.g. make -C tools/testing/selftests/ install \ TARGETS="net" INSTALL_PATH=/tmp/kselftests Fixes: 8735e6ea ("selftests: add selftest for the VRF strict mode") Signed-off-by: -
Hangbin Liu authored
When generating the selftests to another folder, the SRv6 tests are missing as they are not in Makefile, e.g. make -C tools/testing/selftests/ install \ TARGETS="net" INSTALL_PATH=/tmp/kselftests Fixes: 03a0b567 ("selftests: seg6: add selftest for SRv6 End.DT46 Behavior") Fixes: 2195444e ("selftests: add selftest for the SRv6 End.DT4 behavior") Fixes: 2bc03553 ("selftests: add selftest for the SRv6 End.DT6 (VRF) behavior") Signed-off-by: -
Hangbin Liu authored
When generating the selftests to another folder, the include file setup_loopback.sh/setup_veth.sh for gro.sh/gre_gro.sh are missing as they are not in Makefile, e.g. make -C tools/testing/selftests/ install \ TARGETS="net" INSTALL_PATH=/tmp/kselftests Fixes: 7d157501 ("selftests/net: GRO coalesce test") Fixes: 9af771d2 ("selftests/net: allow GRO coalesce test on veth") Signed-off-by: -
Hangbin Liu authored
When generating the selftests to another folder, the icmp.sh test will miss as it is not in Makefile, e.g. make -C tools/testing/selftests/ install \ TARGETS="net" INSTALL_PATH=/tmp/kselftests Fixes: 7e9838b7 ("selftests/net: Add icmp.sh for testing ICMP dummy address responses") Signed-off-by: -
Jiapeng Chong authored
Clean up the following includecheck warning: ./drivers/net/amt.c: net/protocol.h is included more than once. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Yang Yingliang authored
Return error code when alloc_workqueue() fails in amt_init(). Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
-
Shay Agroskin authored
The ENA driver is no longer maintained by Netanel and Guy Signed-off-by:
Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/r/20211102110358.193920-1-shayagr@amazon.comSigned-off-by:
-
Eric Dumazet authored
While commit 097b9146 ("net: fix up truesize of cloned skb in skb_prepare_for_shift()") fixed immediate issues found when KFENCE was enabled/tested, there are still similar issues, when tcp_trim_head() hits KFENCE while the master skb is cloned. This happens under heavy networking TX workloads, when the TX completion might be delayed after incoming ACK. This patch fixes the WARNING in sk_stream_kill_queues when sk->sk_mem_queued/sk->sk_forward_alloc are not zero. Fixes: d3fb45f3 ("mm, kfence: insert KFENCE hooks for SLAB") Signed-off-by:
Marco Elver <elver@google.com> Link: https://lore.kernel.org/r/20211102004555.1359210-1-eric.dumazet@gmail.comSigned-off-by:
-
Geert Uytterhoeven authored
On m68k: In function ‘prestera_hw_build_tests’, inlined from ‘prestera_hw_switch_init’ at drivers/net/ethernet/marvell/prestera/prestera_hw.c:788:2: ././include/linux/compiler_types.h:335:38: error: call to ‘__compiletime_assert_345’ declared with attribute error: BUILD_BUG_ON failed: sizeof(struct prestera_msg_switch_attr_req) != 16 ... The driver assumes structure members are naturally aligned, but does not add explicit padding, thus breaking architectures where integral values are not always naturally aligned (e.g. on m68k, __alignof(int) is 2, not 4). Fixes: bb5dbf2c ("net: marvell: prestera: add firmware v4.0 support") Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211102082433.3820514-1-geert@linux-m68k.orgSigned-off-by:
-
Wan Jiabing authored
Fix following coccicheck warning: ./drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c:446:8-56: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20211102020312.16567-1-wanjiabing@vivo.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net 1) Fix mac address UAF reported by KASAN in nfnetlink_queue, from Florian Westphal. 2) Autoload genetlink IPVS on demand, from Thomas Weissschuh. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: ipvs: autoload ipvs on genl access netfilter: nfnetlink_queue: fix OOB when mac header was cleared ==================== Link: https://lore.kernel.org/r/20211101221528.236114-1-pablo@netfilter.orgSigned-off-by:
-
Maxim Kiselev authored
This patch allows to use 0 for `coal->rx_coalesce_usecs` param to disable rx irq coalescing. Previously we could enable rx irq coalescing via ethtool (For ex: `ethtool -C eth0 rx-usecs 2000`) but we couldn't disable it because this part rejects 0 value: if (!coal->rx_coalesce_usecs) return -EINVAL; Fixes: 84da2658 ("TI DaVinci EMAC : Implement interrupt pacing functionality.") Signed-off-by:Maxim Kiselev <bigunclemax@gmail.com> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20211101152343.4193233-1-bigunclemax@gmail.comSigned-off-by:
-
Yuiko Oshino authored
Add a function to initialize phy rgmii delay according to phydev->interface. Signed-off-by:
Yuiko Oshino <yuiko.oshino@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211101162119.29275-1-yuiko.oshino@microchip.comSigned-off-by:
-
