- 10 Sep, 2018 37 commits
-
-
Takashi Iwai authored
The bcm2835_audio_instance object contains the array of VCHI_SERVICE_HANDLE_T, while the code assumes and uses only the first element explicitly. Let's reduce to a single vchi handle for simplifying the code. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Tested-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
It seems that the resolution of vc04 callback is in 10 msec; i.e. the minimal period size is also 10 msec. This patch adds the corresponding hw constraint. Signed-off-by:
-
Takashi Iwai authored
The chip->audio_mutex is used basically for protecting the opened stream assignment, and the prepare callback is irrelevant with it. Signed-off-by:
-
Takashi Iwai authored
These debug messages worsen the code readability a lot while they give little debuggability (which we already have via tracing, in anyway). Let's clean them up. This allows us to reduce the snd_bcm2835_pcm_lib_ioctl() function to be a direct call of the snd_pcm_lib_ioctl callback (like most other drivers do), too. Signed-off-by:
-
Takashi Iwai authored
When the parameter setup fails, the driver should propagate the error code instead of silently ignoring it. Signed-off-by:
-
Takashi Iwai authored
alsa_stream->chip can be never NULL. Signed-off-by:
-
Takashi Iwai authored
The hw_queue_size of PCM indirect helper doesn't need to be set up if you use the whole given buffer size. Drop the useless initialization, which just confuses readers. Signed-off-by:
-
Takashi Iwai authored
Some fields in alsa_stream are the values we keep already in PCM runtime object, hence they are redundant. Use the standard PCM runtime values instead of the private copies. Signed-off-by:
-
Takashi Iwai authored
The alsa_stream->lock is never used. Kill it. Signed-off-by:
-
Takashi Iwai authored
The handling of SNDRV_PCM_TRIGGER_STOP at the trigger callback is incorrect: when the STOP is issued, the driver is supposed to drop the stream immediately. Meanwhile bcm2835 driver checks the DRAINING state and tries to issue some different command. This patch straightens things a bit, dropping the incorrect state checks. The draining behavior would be still not perfect at this point, but will be improved in a later patch. Signed-off-by:
-
Takashi Iwai authored
The running flag of alsa_stream is basically useless. The running state is strictly controlled in ALSA PCM core side, hence the check in PCM trigger and close callbacks are superfluous. Also, the prefill ack at trigger start became superfluous nowadays with the ALSA PCM core update. Let's rip them off. Signed-off-by:
-
Takashi Iwai authored
All the alsa_stream->open flag checks in the current code are redundant, and they cannot be racy. For the code simplification, let's remove the flag and its check. Signed-off-by:
-
Takashi Iwai authored
bcm2835_audio_setup(), bcm2835_audio_flush_buffers() and bcm2835_audio_flush_playback_buffers() functions do implement nothing. Also, bcm2835_audio_set_ctls() is already called inside bcm2835_audio_set_params(), so the later call is superfluous. This patch removes these superfluous implementations. Signed-off-by:
-
Takashi Iwai authored
In the current code, the mute control is dealt in a special manner, modifying the current volume and saving the old volume, etc. This is inconsistent (e.g. change the volume while muted, then unmute), and way too complex. Also, the whole volume handling code has conversion between ALSA volume and raw volume values, which can lead to another inconsistency and complexity. This patch simplifies these points: - The ALSA volume value is saved in chip->volume - volume->mute saves the mute state - The mute state is evaluated only when the actual volume is passed to the hardware, bcm2835_audio_set_ctls() Signed-off-by:
-
Takashi Iwai authored
The avail_substreams bit mask is checked for the possible racy accesses, but this cannot happen in practice; i.e. the assignment and the check are superfluous. Let's rip them off. Signed-off-by:
-
Takashi Iwai authored
Only a few of them are really needed. Signed-off-by:
-
Takashi Iwai authored
The "IEC958 Playback Stream" control does basically the very same thing as "IEC958 Playback Default" redundantly. The former should have been stream-specific and restored after closing the stream, but we don't do in that way. Since it's nothing but confusion, remove this fake. Signed-off-by:
-
Takashi Iwai authored
snd-bcm2835 driver takes the lock with mutex_lock_interruptible() in all places, which don't make sense. Replace them with the simple mutex_lock(). Also taking a mutex lock right after creating it for each PCM object is nonsense, too. It cannot be racy at that point. We can get rid of it. Last but not least, initializing chip->audio_mutex at each place is error-prone. Initialize properly at creating the chip object in snd_bcm2835_create() instead. Signed-off-by:
-
Rob Herring authored
PCI host drivers have already matched on compatible strings, so checking device_type is redundant. Also, device_type is considered deprecated for FDT though we've still been requiring it for PCI hosts as it is useful for finding PCI buses. Cc: devel@driverdev.osuosl.org Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Ioana Radulescu authored
Functions port_vlans_add() and port_vlans_del() could, in theory, return an uninitialized variable. Fix this by initializing the variable in question at declaration. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
John Whitmore authored
Rename 'pDot11dInfo', this member variable of the structure ieee80211_device causes a checkpatch issue, CamelCase naming. The member has been renamed 'dot11d_info' to clear this issue. This is a coding style change which should have no impact on runtime code execution. Signed-off-by:
John Whitmore <johnfwhitmore@gmail.com> Signed-off-by:
-
John Whitmore authored
The structure rt_dot11d_info contains a memeber variable 'enabled', which causes a checkpatch issue as it is declared as being of type bool. The type of the variable has been changed to a 'u8', to clear the issue. Additionally to aid searching for the member variable in code it has been renamed from 'enabled' to 'dot11d_enabled'. These are purely coding style changes which should not impact runtime code execution. Signed-off-by:
-
John Whitmore authored
Add the required SPDX-License-Identifier to the file r8180_93cx6.h, this clears a checkpatch issue. This is a coding style change which should have no impact on runtime code execution. Signed-off-by:
-
John Whitmore authored
Remove unused definitions from the file r8180_93cx6.h. This is a coding style change which should have no impact on runtime code execution. Signed-off-by:
-
Alexey Skidanov authored
ION had supported heap debug info under /sys/kernel/debug/ion/<heap_name>. This support have been removed but some leftovers (dead code) still exist. This patch removes the existing dead code. Fixes: 15c6098c ("staging: android: ion: Remove ion_handle and ion_client") Signed-off-by:
Alexey Skidanov <alexey.skidanov@intel.com> Acked-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
John Whitmore authored
The function dot11d_init() was previously renamed to clear a style issue. Unfortunately the new name used, dot11d_init(), clashes with a sybmol which is exported with the same name. To correct this problem the function has been renamed to rtl8192u_dot11d_init(). Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Colin Ian King authored
Pointer 'port_priv' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: variable 'port_priv' set but not used [-Wunused-but-set-variable] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Rob Herring authored
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Steve Longerbeam <slongerbeam@gmail.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-media@vger.kernel.org Cc: devel@driverdev.osuosl.org Signed-off-by:
-
Larry Finger authored
When strncpy() is called with source and destination strings the same length, gcc 8 warns that there may be an unterminated string. Using strlcpy() rather than strncpy() forces a null at the end and quiets the warning. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
When strncpy() is called with source and destination strings the same length, gcc 8 warns that there may be an unterminated string. This section is completely reworked to use the known lengths of the strings. Signed-off-by:
-
Pavel Zemlyanoy authored
This patch does not change the logic, it only corrects the formatting and checkpatch checks by braces {} should be used on all arms of this statement, unbalanced braces around else statement and warning by braces {} are not necessary for any arm of this statement. The patch fixes 9 checks of type: "Check: braces {} should be used on all arms of this statement"; "Check: Unbalanced braces around else statement"; and 1 warning of type: "WARNING: braces {} are not necessary for any arm of this statement". Signed-off-by:Pavel Zemlyanoy <zemlyanoy@ispras.ru> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Reviewed-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
-
Pavel Zemlyanoy authored
This patch does not change the logic, it only corrects the formatting and checkpatch check by alignment should match open parenthesis. The patch fixes 2 check of type: "Check: Alignment should match open parenthesis". Signed-off-by:
-
Pavel Zemlyanoy authored
This patch does not change the logic, it only corrects the formatting and checkpatch check by adding spaces around '*'. The patch fixes 1 check of type: "Check: spaces preferred around that '*'". Signed-off-by:
-
Pavel Zemlyanoy authored
This patch does not change the logic, it only corrects the formatting and checkpatch checks by adding spaces around '-'. The patch fixes 4 checks of type: "Check: spaces preferred around that '-'". Signed-off-by:
-
Pavel Zemlyanoy authored
This patch does not change the logic, it only corrects the formatting and checkpatch checks by to NULL comparison. The patch fixes 5 checks of type: "Comparison to NULL could be written". Signed-off-by:
-
Pavel Zemlyanoy authored
This patch does not change the logic, it only corrects the formatting and checkpatch warnings by adding "int" to the unsigned type. The patch fixes 11 warnings of the type: "WARNING: Prefer 'unsigned int' to bare use of 'unsigned'" Signed-off-by:
-
Gao Xiang authored
This reverts commit 156c3df8. Since XArray and the new mount apis aren't merged in 4.19-rc1 merge window, the BROKEN mark can be reverted directly without any problems. Fixes: 156c3df8 ("staging: erofs: disable compiling temporarile") Cc: Matthew Wilcox <willy@infradead.org> Cc: David Howells <dhowells@redhat.com> Reviewed-by:
-
- 27 Aug, 2018 3 commits
-
-
Georgios Tsotsos authored
Replaces CVMX_WAIT_FOR_FIELD32 macro with equivalent function. Signed-off-by:
Georgios Tsotsos <tsotsos@gmail.com> Signed-off-by:
-
Arkadiusz Lis authored
Add SPDX-License-Identifier to the source files. Remove redundant, old license. Signed-off-by:
Arkadiusz Lis <areklis909@gmail.com> Signed-off-by:
-
Christian Gromm authored
The channel attribute dbr_size is only relevant for the DIM2 interface. so is the packets_per_xact for USB. This patch cleans up the driver's ABI by not showing all attributes by default for each channel, but only on those they belong to. Signed-off-by:
Christian Gromm <christian.gromm@microchip.com> Signed-off-by:
-
