- 28 Sep, 2022 30 commits
-
-
Krzysztof Kozlowski authored
The syscon bindings require a device specific compatible, beside the "syscon". However schema counts "simple-mfd" as such, which allows simple-mfd+syscon to sneak in. Adjust the match to be sure simple-mfd also comes with a device specific compatible. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220817142246.828762-5-krzysztof.kozlowski@linaro.org
-
Krzysztof Kozlowski authored
Conversion from TXT to DT schema lost several compatibles. Fixes: 3f5117be ("dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC") Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Reviewed-by:
David Heidelberg <david@ixit.cz> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Tinghan Shen authored
The System Control Processor System (SCPSYS) has several power management related tasks in the system. Add the bindings for it. Signed-off-by:
Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-by:
-
Rob Herring authored
Convert the aspeed,ast2[456]00-scu binding to DT schema format. The original binding was missing '#address-cells', '#size-cells', 'ranges', and child nodes, so add them. Signed-off-by:
-
ChiYuan Huang authored
Add Richtek RT5120 PMIC devicetree document. Reviewed-by:
ChiYuan Huang <cy_huang@richtek.com> Signed-off-by:
-
ChiYuan Huang authored
Add Richtek RT5120 PMIC I2C driver. Signed-off-by:
-
Michal Oleszczyk authored
When we consider MFD which implements hotplug (e.g. USB hotplug driver based on product and vendor IDs) functionality it turns out that its sub-devices are correctly matched with corresponding device tree nodes only at the first time. When physical device reboots or is replugged (and MFD driver is disconnected and probed back again) all sub-devices fails in mfd_add_device() with error 'Failed to locate of_node'. The reason of that behavior is that when any MFD sub-device is created for the first time (and matched with device tree node) it is added to the mfd_of_node_list. It looks like this list is never cleaned even if devices added there are intentionally removed from the system. So when MFD device is replugged and all sub-devices are matched with their device tree nodes again they fail as matched nodes already exist in mfd_of_node_list. In other words current implementation does not support MFD with hotplug feature. This commit extends MFD core for hotplugging support by removing appropriate OF node entry from mfd_of_node_list when corresponding device is removed from the system. Thanks to that when device is added once again it can be matched with its device tree node successfully. Signed-off-by:
Michal Oleszczyk <oleszczyk.m@gmail.com> Signed-off-by:
-
Jason Wang authored
The double `to' is duplicated in the comment, remove one. Signed-off-by:
Jason Wang <wangborong@cdjrlc.com> Signed-off-by:
-
Christophe JAILLET authored
In lp8788_irq_init(), if an error occurs after a successful irq_domain_add_linear() call, it must be undone by a corresponding irq_domain_remove() call. irq_domain_remove() should also be called in lp8788_irq_exit() for the same reason. Fixes: eea6b7cc ("mfd: Add lp8788 mfd driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
Should an error occurs in mfd_add_devices(), some resources need to be released, as already done in the .remove() function. Add an error handling path and a lp8788_irq_exit() call to undo a previous lp8788_irq_init(). Fixes: eea6b7cc ("mfd: Add lp8788 mfd driver") Signed-off-by:
-
Christophe JAILLET authored
If devm_of_platform_populate() fails, some resources need to be released. Introduce a mx25_tsadc_unset_irq() function that undoes mx25_tsadc_setup_irq() and call it both from the new error handling path of the probe and in the remove function. Fixes: a55196ef ("mfd: fsl-imx25: Use devm_of_platform_populate()") Signed-off-by:
-
Samuel Holland authored
AXP228 is a PMIC used on boards such as the Clockwork ClockworkPi and DevTerm. Its register map appears to be identical to the AXP221 variant. The only known difference is in the default values for regulator on/off states and voltages. Signed-off-by:
Samuel Holland <samuel@sholland.org> Acked-by:
-
Alistair Francis authored
Add a specific MFD_SY7636A config option. As part of this change we can use MFD_SY7636A as a dependency for all SY7636a components and also remove the name from MFD_SIMPLE_MFD_I2C as it no longer needs to be selectable. Signed-off-by:
Alistair Francis <alistair@alistair23.me> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
ChiYuan Huang authored
This adds support for the MediaTek MT6370 SubPMIC. MediaTek MT6370 is a SubPMIC consisting of a single cell battery charger with ADC monitoring, RGB LEDs, dual channel flashlight, WLED backlight driver, display bias voltage supply, one general purpose LDO, and the USB Type-C & PD controller complies with the latest USB Type-C and PD standards. Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
ChiaEn Wu <chiaen_wu@richtek.com> Signed-off-by:
-
ChiYuan Huang authored
Add MediaTek MT6370 binding documentation. Reviewed-by:
-
Chris Morgan authored
Add rk817 charger support cell to rk808 mfd driver. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Signed-off-by:
Maya Matuszczyk <maccraft123mc@gmail.com> Signed-off-by:
-
Andy Shevchenko authored
Update the copyright year to be 2012-2014, 2022. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Andy Shevchenko authored
To reflect the point that this driver is only for one type of the PMICs, replace intel_soc_pmic with crystal_cove (avoid using crc for possible namespace collisions with CRC library APIs). Note, also rename the driver name since we don't expect any user that enumerates by it, only ACPI known so far. Signed-off-by:
-
Andy Shevchenko authored
Use the ->probe_new() callback. The driver does not use const struct i2c_device_id * argument, so convert it to utilise the simplified I²C driver registration. Signed-off-by:
-
Andy Shevchenko authored
The driver depends on ACPI, ACPI_PTR() resolution is always the same. Otherwise a compiler may produce a warning. That said, the rule of thumb either ugly ifdeffery with ACPI_PTR or none should be used in a driver. Signed-off-by:
-
Andy Shevchenko authored
Letting the compiler remove these functions when the kernel is built without CONFIG_PM_SLEEP support is simpler and less error prone than the use of #ifdef based kernel configuration guards. Signed-off-by:
-
Andy Shevchenko authored
We have the specific helpers for I2C device to set and get its driver data. Convert driver to use them instead of open coded variants. Signed-off-by:
-
Andy Shevchenko authored
Use devm_regmap_add_irq_chip() to simplify the code. While at it, replace -1 magic parameter by PLATFORM_DEVID_NONE when calling mfd_add_devices(). Note, the mfd_add_devices() left in non-devm variant here due to potentially increased churn while wrapping pwm_remove_table(). Signed-off-by:
-
Andy Shevchenko authored
It looks like a random position for couple of Makefile entries that are disrupting Intel PMIC group. Move them to their own group. Signed-off-by:
-
Andy Shevchenko authored
The core part is misleading since its only purpose to serve Crystal Cove PMIC, although for couple of different platforms. Merge core part into crc one. Advantages among others are: - speed up a compilation and build - decreasing the code base - reducing noise in the namespace by making some data static and const Signed-off-by:
-
Christophe JAILLET authored
The commit in Fixes: has added a pwm_add_table() call in the probe() and a pwm_remove_table() call in the remove(), but forget to update the error handling path of the probe. Add the missing pwm_remove_table() call. Fixes: a3aa9a93 ("mfd: intel_soc_pmic_core: ADD PWM lookup table for CRC PMIC based PWM") Signed-off-by:
-
Jagan Teki authored
Document dt-bindings for Rockchip RV1126 QoS registers. Signed-off-by:
Jagan Teki <jagan@edgeble.ai> Acked-by:
-
Francesco Dolcini authored
Use sub-function of_compatible during probe, instead of using the node name. The code should not rely on the node names during probe, in addition to that the previously hard-coded node names are not compliant to the latest naming convention (they are not generic and they use underscores), and it was broken by mistake already once [1]. [1] commit 56086b5e ("ARM: dts: imx6qdl-apalis: Avoid underscore in node name") Suggested-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Francesco Dolcini authored
Remove rotator block from probe, it is not used in any device tree file, there is no related cell defined, it's just dead non-working code with no of_compatible for it. This is a preliminary change to allow probing by of_compatible and not by a fixed name. Signed-off-by:
-
Andy Shevchenko authored
The SPI driver wants to know the exact type of the controller. Provide this information to it. This is a complementary part to the previously updated intel-lpss-acpi.c. Signed-off-by:
-
- 09 Sep, 2022 8 commits
-
-
Colin Foster authored
The VSC7512 is a networking chip that contains several peripherals. Many of these peripherals are currently supported by the VSC7513 and VSC7514 chips, but those run on an internal CPU. The VSC7512 lacks this CPU, and must be controlled externally. Utilize the existing drivers by referencing the chip as an MFD. Add support for the two MDIO buses, the internal phys, pinctrl, and serial GPIO. Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Colin Foster authored
Add devicetree bindings for SPI-controlled Ocelot chips, specifically the VSC7512. Signed-off-by:
-
Colin Foster authored
DEFINE_RES_ macros have been created for the commonly used resource types, but not IORESOURCE_REG. Add the macro so it can be used in a similar manner to all other resource types. Signed-off-by:
-
Colin Foster authored
There are a few Ocelot chips that can contain SGPIO logic, but can be controlled externally. Specifically the VSC7511, 7512, 7513, and 7514. In the externally controlled configurations these registers are not memory-mapped. Add support for these non-memory-mapped configurations. Signed-off-by:
-
Colin Foster authored
As the commit message suggests, this simply adds the ability to select SGPIO pinctrl as a module. This becomes more practical when the SGPIO hardware exists on an external chip, controlled indirectly by I2C or SPI. This commit enables that level of control. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
-
Colin Foster authored
There are a few Ocelot chips that contain pinctrl logic, but can be controlled externally. Specifically the VSC7511, 7512, 7513 and 7514. In the externally controlled configurations these registers are not memory-mapped. Add support for these non-memory-mapped configurations. Signed-off-by:
-
Colin Foster authored
There are a few Ocelot chips that contain the logic for this bus, but are controlled externally. Specifically the VSC7511, 7512, 7513, and 7514. In the externally controlled configurations these registers are not memory-mapped. Add support for these non-memory-mapped configurations. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Colin Foster authored
Several ocelot-related modules are designed for MMIO / regmaps. As such, they often use a combination of devm_platform_get_and_ioremap_resource() and devm_regmap_init_mmio(). Operating in an MFD might be different, in that it could be memory mapped, or it could be SPI, I2C... In these cases a fallback to use IORESOURCE_REG instead of IORESOURCE_MEM becomes necessary. When this happens, there's redundant logic that needs to be implemented in every driver. In order to avoid this redundancy, utilize a single function that, if the MFD scenario is enabled, will perform this fallback logic. Signed-off-by:
-
- 14 Aug, 2022 2 commits
-
-
Linus Torvalds authored
-
Yury Norov authored
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we have gfp_types.h for this. Fixes powerpc allmodconfig build: In file included from include/linux/nodemask.h:97, from include/linux/mmzone.h:17, from include/linux/gfp.h:7, from include/linux/radix-tree.h:12, from include/linux/idr.h:15, from include/linux/kernfs.h:12, from include/linux/sysfs.h:16, from include/linux/kobject.h:20, from include/linux/pci.h:35, from arch/powerpc/kernel/prom_init.c:24: include/linux/random.h: In function 'add_latent_entropy': >> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'? 25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy)); | ^~~~~~~~~~~~~~ | add_latent_entropy include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in Reported-by:kernel test robot <lkp@intel.com> CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Yury Norov <yury.norov@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
