Merge tag 'integrator-irq' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc

From Linus Walleij:

This provides the following Integrator refactorings:
- Switch the FPGA IRQ controller to use the simple IRQ domain
- Get rid of preallocated IRQ descriptors on the Integrator
- Move the FPGA IRQ driver to drivers/irqchip

* tag 'integrator-irq' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: plat-versatile: move FPGA irq driver to drivers/irqchip
  ARM: integrator: get rid of preallocated irq descriptors
  ARM: plat-versatile: use simple irqdomain for FPGA IRQ

Support for Calxeda ECX-2000 SOC from Rob Herring

* tag 'calxeda-ecx-2000' of git://sources.calxeda.com/kernel/linux:
  ARM: highbank: Add initial ECX-2000 support
  ARM: highbank: abstract out SCU usage
  ARM: smp_twd: don't warn on no DT node
  ARM: dts: Add Calxeda ECX-2000 support
  ARM: highbank: enable coherent DMA for xgmac in dts
  ARM: highbank: disable unused sdhci and gpio in dts
  + sync to Linux 3.7-rc3

From Simon Horman:
* 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7740: Enable PMU
  ARM: mach-shmobile: add FLCTL DMA slave definitions for sh7372
  ARM: shmobile: r8a7779: add I2C driver support
  ARM: shmobile: r8a7779: add I2C clock support
  ARM: shmobile: r8a7779: add HSPI clock support
  ARM: shmobile: r8a7740: fixup DT machine desc name typo
  ARM: shmobile: r8a7779: Replace modify_scu_cpu_psr with scu_power_mode
  ARM: shmobile: sh73a0: Replace modify_scu_cpu_psr with scu_power_mode
  ARM: shmobile: emev2: Replace modify_scu_cpu_psr with scu_power_mode
  ARM: shmobile: Remove SH7377 support
  ARM: shmobile: Remove SH7367 support

This patch enables PMU for r8a7740.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
[horms@verge.net.au: corrected indentation]
Signed-off-by: Simon Horman <horms@verge.net.au>

SH7372 can use DMA with the FLCTL flash controller. Add required slave
IDs and slave descriptors.
Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

This patch enable R-Car I2C driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

This patch is required from R-Car I2C driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

r8a7740 machine desc name should be R8A7740,
not SH7372
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

We can remove the extra code of modify_scu_cpu_psr() and use the cleaner
generic ARM helper scu_power_mode(). As every CPU only deals with its
own power register and scu_power_mode() operates with 8-bit accesses,
we save the locking overhead too.
Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

We can remove the extra code of modify_scu_cpu_psr() and use the cleaner
generic ARM helper scu_power_mode(). As every CPU only deals with its
own power register and scu_power_mode() operates with 8-bit accesses,
we save the locking overhead too.
Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

We can remove the extra code of modify_scu_cpu_psr() and use the cleaner
generic ARM helper scu_power_mode(). As every CPU only deals with its
own power register and scu_power_mode() operates with 8-bit accesses,
we save the locking overhead too.
Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

This is old CPU of shmobile, and the machine by which this CPU is
used cannot be obtained.
Therefore, remove SH7377 support.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

This is old CPU of shmobile, and the machine by which this CPU is
used cannot be obtained.
Therefore, remove SH7367 support.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

This moves the Versatile FPGA interrupt controller driver, used in
the Integrator/AP, Integrator/CP and some Versatile boards, out
of arch/arm/plat-versatile and down to drivers/irqchip where we
have consensus that such drivers belong. The header file is
consequently moved to <linux/platform_data/irq-versatile-fpga.h>.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

And initial Calxeda ECX-2000 SOC support. This adds Cortex-A15 peripherals
and machine DT match name.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

In preparation for A15 support on ECX-2000, the direct calls to SCU
registers must be conditional. The SCU power mode register is replaced by
a custom register on ECX-2000.

Rather than read the number of cores from the SCU, just hardcode it to 4.
This removes one use of SCU and removes the need for the SCU to be
statically mapped. The cpu initialization will ultimately come from DT.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

Not having a TWD is valid if we have multiple platforms with different
cores, so remove the warning message.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

Separate out common dts pieces from highbank dts and add support for
Calxeda ECX-2000 (Midway) SOC.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

Enable the xgmac to use the coherent DMA path in highbank.dts
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

These peripherals are not enabled in current systems, so turn them off.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

Pull ktest confusion fix from Steven Rostedt:
 "With the v3.7-rc2 kernel, the network cards on my target boxes were
  not being brought up.

  I found that the modules for the network was not being installed.
  This was due to the config CONFIG_MODULES_USE_ELF_RELA that came
  before CONFIG_MODULES, and confused ktest in thinking that
  CONFIG_MODULES=y was not found.

  Ktest needs to test all configs and not just stop if something starts
  with CONFIG_MODULES."

* tag 'ktest-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Fix ktest confusion with CONFIG_MODULES_USE_ELF_RELA

Pull minor spi MXS fixes from Mark Brown:
 "These fixes are both pretty minor ones and are driver local."

* tag 'spi-mxs' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc:
  spi: mxs: Terminate DMA in case of DMA timeout
  spi: mxs: Assign message status after transfer finished

Pull arm-soc fixes from Arnd Bergmann:
 "Bug fixes for a number of ARM platforms, mostly OMAP, imx and at91.

  These come a little later than I had hoped but unfortunately we had a
  few of these patches cause regressions themselves and had to work out
  how to deal with those in the meantime."

* tag 'fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  Revert "ARM i.MX25: Fix PWM per clock lookups"
  ARM: versatile: fix versatile_defconfig
  ARM: mvebu: update defconfig with 3.7 changes
  ARM: at91: fix at91x40 build
  ARM: socfpga: Fix socfpga compilation with early_printk() enabled
  ARM: SPEAr: Remove unused empty files
  MAINTAINERS: Add arm-soc tree entry
  ARM: dts: mxs: add the "clock-names" for gpmi-nand
  ARM: ux500: Correct SDI5 address and add some format changes
  ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT
  ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE
  ARM: at91: drop duplicated config SOC_AT91SAM9 entry
  ARM: at91/i2c: change id to let i2c-at91 work
  ARM: at91/i2c: change id to let i2c-gpio work
  ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels.
  ARM: at91: fix external interrupt specification in board code
  ARM: at91: fix external interrupts in non-DT case
  ARM: at91: at91sam9g10: fix SOC type detection
  ARM: at91/tc: fix typo in the DT document
  ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500
  ...

Functions generic_file_splice_read and generic_file_splice_write access
the pagecache directly. For block devices these functions must be locked
so that block size is not changed while they are in progress.

This patch is an additional fix for commit b87570f5 ("Fix a crash
when block device is read and block size is changed at the same time")
that locked aio_read, aio_write and mmap against block size change.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use rcu_read_lock_sched / rcu_read_unlock_sched / synchronize_sched
instead of rcu_read_lock / rcu_read_unlock / synchronize_rcu.

This is an optimization. The RCU-protected region is very small, so
there will be no latency problems if we disable preempt in this region.

So we use rcu_read_lock_sched / rcu_read_unlock_sched that translates
to preempt_disable / preempt_disable. It is smaller (and supposedly
faster) than preemptible rcu_read_lock / rcu_read_unlock.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch introduces new barrier pair light_mb() and heavy_mb() for
percpu rw semaphores.

This patch fixes a bug in percpu-rw-semaphores where a barrier was
missing in percpu_up_write.

This patch improves performance on the read path of
percpu-rw-semaphores: on non-x86 cpus, there was a smp_mb() in
percpu_up_read. This patch changes it to a compiler barrier and removes
the "#if defined(X86) ..." condition.

From: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 92063cee, it
was applied prematurely, causing this build error for
imx_v4_v5_defconfig:

arch/arm/mach-imx/clk-imx25.c: In function 'mx25_clocks_init':
arch/arm/mach-imx/clk-imx25.c:206:26: error: 'pwm_ipg_per' undeclared (first use in this function)
arch/arm/mach-imx/clk-imx25.c:206:26: note: each undeclared identifier is reported only once for each function it appears in

Sascha Hauer explains:
> There are several gates missing in clk-imx25.c. I have a patch which
> adds support for them and I seem to have missed that the above depends
> on it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

With the introduction of CONFIG_ARCH_MULTIPLATFORM, versatile is
no longer the default platform, so we need to enable
CONFIG_ARCH_VERSATILE explicitly in order for that to be selected
rather than the multiplatform configuration.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The split of 370 and XP into two Kconfig options and the multiplatform
kernel support has changed a few Kconfig symbols, so let's update the
mvebu_defconfig file with the latest changes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

patch 738a0fd7 "ARM: at91: fix external interrupts in non-DT case"
fixed a run-time error on some at91 platforms but did not apply
the same change to at91x40, which now doesn't build.

This changes at91x40 in the same way that the other platforms
were changed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

The Integrators were using the .nr_irqs field of the machine
descriptor to pre-allocate a number of descriptors at boot. This
is not right: the irq chip implementations should allocate
their descriptors themselves, and as a result the simple
irqdomain code warns about it.

Get rid of this by just deleting the .nr_irq field from the
machine descriptors but take care: doing so makes the default
implementation hog the first 16 IRQ numbers, so these cannot
be used by the still static IRQ number assignments in the
ATAG boot case. So for these, bump the IRQ numbers to begin
at 64 and upward.

Introduce an offset to offset all IRQ numbers if need be,
though we don't expect to do that again as device tree comes
along.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This switches the FPGA IRQ driver over to using the simple IRQ
domain. We can then use the same codepath for this in the
DT and non-DT cases.

To be able to use quicker irq_find_mapping() in the handlers
we first call irq_create_mapping() on all the valid HW IRQ
numbers so that descriptors will be created for them in the
DT case where a linear domain will be the outcome of the
call.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull networking fixes from David Miller:
 "This is what we usually expect at this stage of the game, lots of
  little things, mostly in drivers.  With the occasional 'oops didn't
  mean to do that' kind of regressions in the core code."

 1) Uninitialized data in __ip_vs_get_timeouts(), from Arnd Bergmann

 2) Reject invalid ACK sequences in Fast Open sockets, from Jerry Chu.

 3) Lost error code on return from _rtl_usb_receive(), from Christian
    Lamparter.

 4) Fix reset resume on USB rt2x00, from Stanislaw Gruszka.

 5) Release resources on error in pch_gbe driver, from Veaceslav Falico.

 6) Default hop limit not set correctly in ip6_template_metrics[], fix
    from Li RongQing.

 7) Gianfar PTP code requests wrong kind of resource during probe, fix
    from Wei Yang.

 8) Fix VHOST net driver on big-endian, from Michael S Tsirkin.

 9) Mallenox driver bug fixes from Jack Morgenstein, Or Gerlitz, Moni
    Shoua, Dotan Barak, and Uri Habusha.

10) usbnet leaks memory on TX path, fix from Hemant Kumar.

11) Use socket state test, rather than presence of FIN bit packet, to
    determine FIONREAD/SIOCINQ value.  Fix from Eric Dumazet.

12) Fix cxgb4 build failure, from Vipul Pandya.

13) Provide a SYN_DATA_ACKED state to complement SYN_FASTOPEN in socket
    info dumps.  From Yuchung Cheng.

14) Fix leak of security path in kfree_skb_partial().  Fix from Eric
    Dumazet.

15) Handle RX FIFO overflows more resiliently in pch_gbe driver, from
    Veaceslav Falico.

16) Fix MAINTAINERS file pattern for networking drivers, from Jean
    Delvare.

17) Add iPhone5 IDs to IPHETH driver, from Jay Purohit.

18) VLAN device type change restriction is too strict, and should not
    trigger for the automatically generated vlan0 device.  Fix from Jiri
    Pirko.

19) Make PMTU/redirect flushing work properly again in ipv4, from
    Steffen Klassert.

20) Fix memory corruptions by using kfree_rcu() in netlink_release().
    From Eric Dumazet.

21) More qmi_wwan device IDs, from Bjørn Mork.

22) Fix unintentional change of SNAT/DNAT hooks in generic NAT
    infrastructure, from Elison Niven.

23) Fix 3.6.x regression in xt_TEE netfilter module, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits)
  tilegx: fix some issues in the SW TSO support
  qmi_wwan/cdc_ether: move Novatel 551 and E362 to qmi_wwan
  net: usb: Fix memory leak on Tx data path
  net/mlx4_core: Unmap UAR also in the case of error flow
  net/mlx4_en: Don't use vlan tag value as an indication for vlan presence
  net/mlx4_en: Fix double-release-range in tx-rings
  bas_gigaset: fix pre_reset handling
  vhost: fix mergeable bufs on BE hosts
  gianfar_ptp: use iomem, not ioports resource tree in probe
  ipv6: Set default hoplimit as zero.
  NET_VENDOR_TI: make available for am33xx as well
  pch_gbe: fix error handling in pch_gbe_up()
  b43: Fix oops on unload when firmware not found
  mwifiex: clean up scan state on error
  mwifiex: return -EBUSY if specific scan request cannot be honored
  brcmfmac: fix potential NULL dereference
  Revert "ath9k_hw: Updated AR9003 tx gain table for 5GHz"
  ath9k_htc: Add PID/VID for a Ubiquiti WiFiStation
  rt2x00: usb: fix reset resume
  rtlwifi: pass rx setup error code to caller
  ...

Pull slave-dmaengine fixes from Vinod Koul:
 "Three fixes for slave dmanegine.

  Two are for typo omissions in sifr dmaengine driver and the last one
  is for the imx driver fixing a missing unlock"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: sirf: fix a typo in moving running dma_desc to active queue
  dmaengine: sirf: fix a typo in dma_prep_interleaved
  dmaengine: imx-dma: fix missing unlock on error in imxdma_xfer_desc()

Pull power management and ACPI fixes from Rafael J Wysocki:

 - Fix for a memory leak in acpi_bind_one() from Jesper Juhl.

 - Fix for an error code path memory leak in pm_genpd_attach_cpuidle()
   from Jonghwan Choi.

 - Fix for smp_processor_id() usage in preemptible code in powernow-k8
   from Andreas Herrmann.

 - Fix for a suspend-related memory leak in cpufreq stats from Xiaobing
   Tu.

 - Freezer fix for failure to clear PF_NOFREEZE along with PF_KTHREAD in
   flush_old_exec() from Oleg Nesterov.

 - acpi_processor_notify() fix from Alan Cox.

* tag 'pm+acpi-for-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: missing break
  freezer: exec should clear PF_NOFREEZE along with PF_KTHREAD
  Fix memory leak in cpufreq stats.
  cpufreq / powernow-k8: Remove usage of smp_processor_id() in preemptible code
  PM / Domains: Fix memory leak on error path in pm_genpd_attach_cpuidle
  ACPI: Fix memory leak in acpi_bind_one()

Pull infiniband fixes from Roland Dreier:
 "Small batch of fixes for 3.7:
   - Fix crash in error path in cxgb4
   - Fix build error on 32 bits in mlx4
   - Fix SR-IOV bugs in mlx4"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  mlx4_core: Perform correct resource cleanup if mlx4_QUERY_ADAPTER() fails
  mlx4_core: Remove annoying debug messages from SR-IOV flow
  RDMA/cxgb4: Don't free chunk that we have failed to allocate
  IB/mlx4: Synchronize cleanup of MCGs in MCG paravirtualization
  IB/mlx4: Fix QP1 P_Key processing in the Primary Physical Function (PPF)
  IB/mlx4: Fix build error on platforms where UL is not 64 bits

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a bunch of USB fixes for the 3.7-rc tree.

  There's a lot of small USB serial driver fixes, and one larger one
  (the mos7840 driver changes are mostly just moving code around to fix
  problems.) Thanks to Johan Hovold for finding the problems and fixing
  them all up.

  Other than those, there is the usual new device ids, xhci bugfixes,
  and gadget driver fixes, nothing out of the ordinary.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (49 commits)
  xhci: trivial: Remove assigned but unused ep_ctx.
  xhci: trivial: Remove assigned but unused slot_ctx.
  xhci: Fix missing break in xhci_evaluate_context_result.
  xhci: Fix potential NULL ptr deref in command cancellation.
  ehci: Add yet-another Lucid nohandoff pci quirk
  ehci: fix Lucid nohandoff pci quirk to be more generic with BIOS versions
  USB: mos7840: fix port_probe flow
  USB: mos7840: fix port-data memory leak
  USB: mos7840: remove invalid disconnect handling
  USB: mos7840: remove NULL-urb submission
  USB: qcserial: fix interface-data memory leak in error path
  USB: option: fix interface-data memory leak in error path
  USB: ipw: fix interface-data memory leak in error path
  USB: mos7840: fix port-device leak in error path
  USB: mos7840: fix urb leak at release
  USB: sierra: fix port-data memory leak
  USB: sierra: fix memory leak in probe error path
  USB: sierra: fix memory leak in attach error path
  USB: usb-wwan: fix multiple memory leaks in error paths
  USB: keyspan: fix NULL-pointer dereferences and memory leaks
  ...

Pull serial fix from Greg Kroah-Hartman:
 "Here is one patch, a revert of a omap serial driver patch that was
  causing problems, for your 3.7-rc tree.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: omap: fix software flow control"