- 11 Jun, 2020 11 commits
-
-
Mauro Carvalho Chehab authored
Some arguments for tnf and ref settings are meant to be const, but they're defined without such annotation. Due to that, there's an ugly cast at sh_css_sp.c. Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
The very same macros are defined as CSS_foo and IA_CSS_foo. Remove this abstraction, as it just make things confusing, for no good reason. Acked-by:
-
Mauro Carvalho Chehab authored
This driver has 3 different types of debug messages: - dev_dbg() - dbg_level - ia_css_debug_trace_level Which is crazy. Ideally, it shold just use dev_dbg() everywhere, but for now let's unify the last two machanisms. Acked-by:
-
Mauro Carvalho Chehab authored
It sounds that someone once changed the debug level at compile time for some testing, but forgot to remove the legacy code after finishing debuging it. Get rid of the dead code. Acked-by:
-
Mauro Carvalho Chehab authored
Let's reflect the current status at the TODO list, as other developers can help addressing issues over there. Acked-by:
-
Mauro Carvalho Chehab authored
Using DQBUF on non-blocking mode will return -EAGAIN if nothing arrives. Printing it has no value, even for debug purposes. So, only display real return codes. Acked-by:
-
Mauro Carvalho Chehab authored
There are several error conditions that don't print anything, making harder to identify bugs at the code there. Acked-by:
-
Mauro Carvalho Chehab authored
There's no reason to copy isp_sink_fmt, as the driver uses it for read-only purposes. Linux stack is a precious resource. Let's avoid wasting it. Acked-by:
-
Mauro Carvalho Chehab authored
Currently, when an EOF IRQ is received, it generates two messages: [ 59.191893] atomisp-isp2 0000:00:03.0: irq:0x200000 [ 59.191913] atomisp-isp2 0000:00:03.0: atomisp_isr EOF exp_id 142, asd 0 Flooding the dmesg with lots of messages per second. The same pattern happens for all other IRQs. Change the logic for printing just one message per IRQ and rate-limit those, as, for debugging purposes, it is usually interesting to know that IRQs are being received, but not displaying every single one. Acked-by:
-
Mauro Carvalho Chehab authored
This is not used anywhere. So, let's trash it. Acked-by:
-
Mauro Carvalho Chehab authored
The code under load_primary_binaries() is complex and were hard to understand, because it used to have lots of ifdefs and broken identation. The patch which cleaned it and removed the version-specific ifdefs added a regression. Solve it. Fixes: 3c0538fb ("media: atomisp: get rid of most checks for ISP2401 version") Signed-off-by:
-
- 25 May, 2020 9 commits
-
-
Sakari Ailus authored
The media bus formats to be used on serial busses are documented but there was no reference from CSI-2 documentation. Add that now. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
The IMX219 camera driver is not a clock provider, but merely a clock consumer, and thus does not need to include <linux/clk-provider.h> and <linux/clkdev.h>. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Bingbu Cao authored
OminiVision ov2740 is a 2 megapixels RAW RGB image sensor which can deliver 1920x1080@60fps frames. This driver add the support of vertical blanking, exposure, test pattern, digital and analog gain control for sensor. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
Shawn Tu <shawnx.tu@intel.com> Signed-off-by:
Qiu, Tianshu <tian.shu.qiu@intel.com> Signed-off-by:
-
Robert Foss authored
Query the sensor for its module revision, and compare it to known revisions. Currently 2A and 1B revision indentification is supported. [Sakari Ailus: Wrap a line over 80, alignment, use %u for printing u32] Signed-off-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
Robert Foss authored
Add match table, enable ov8856_probe() to support both ACPI and DT modes. ACPI and DT modes are primarily distinguished from by checking for ACPI mode and by having resource like be NULL. Signed-off-by:
-
Dongchun Zhu authored
This patch adds documentation of device tree in YAML schema for the OV8856 CMOS image sensor. Signed-off-by:
Dongchun Zhu <dongchun.zhu@mediatek.com> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Dirk Nehring authored
Terratec Cinergy S2 PCIe Dual is a PCIe device with two tuners that actually contains two USB devices. The devices are visible in the lsusb printout. Bus 004 Device 002: ID 153b:1182 TerraTec Electronic GmbH Cinergy S2 PCIe Dual Port 2 Bus 003 Device 002: ID 153b:1181 TerraTec Electronic GmbH Cinergy S2 PCIe Dual Port 1 The devices use the Montage M88DS3000/M88TS2022 demod/tuner. Signed-off-by:
Dirk Nehring <dnehring@gmx.net> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Brad Love authored
Fixes bug exposed by: [a3fbc2e6: media: mc-entity.c: use WARN_ON, validate link pads] The dvbdev incorrectly requests a tuner sink pad to connect to a demux sink pad. The media controller failure percolates back and the dvb device creation fails. Fix this by requesting a tuner source pad. Instead of forcing that pad to be index zero, check if a negative integer error is returned. A note is added that first source pad found is chosen. Affected bridges cx231xx and em28xx printed the below warning[s] when a variety of media controller dvb enabled devices were connected. The warning returns an error causing all affected devices to fail DVB device creation. [ 253.138332] ------------[ cut here ]------------ [ 253.138339] WARNING: CPU: 0 PID: 1550 at drivers/media/mc/mc-entity.c:669 media_create_pad_link+0x1e0/0x200 [mc] [ 253.138339] Modules linked in: si2168 em28xx_dvb(+) em28xx si2157 lgdt3306a cx231xx_dvb dvb_core cx231xx_alsa cx25840 cx231xx tveeprom cx2341x i2c_mux videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc ir_rc5_decoder rc_hauppauge mceusb rc_core eda c_mce_amd kvm nls_iso8859_1 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper efi_pstore wmi_bmof k10temp asix usbnet mii nouveau snd_hda_codec_realtek snd_hda_codec_generic input_leds ledtrig_audio snd_hda_codec_hdmi mxm_wmi snd_hda_in tel video snd_intel_dspcfg ttm snd_hda_codec drm_kms_helper snd_hda_core drm snd_hwdep snd_seq_midi snd_seq_midi_event i2c_algo_bit snd_pcm snd_rawmidi fb_sys_fops snd_seq syscopyarea sysfillrect snd_seq_device sysimgblt snd_timer snd soundcore ccp mac_hid sch_fq_codel parport_p c ppdev lp parport ip_tables x_tables autofs4 vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio hid_generic usbhid hid i2c_piix4 ahci libahci wmi gpio_amdpt [ 253.138370] gpio_generic [ 253.138372] CPU: 0 PID: 1550 Comm: modprobe Tainted: G W 5.7.0-rc2+ #181 [ 253.138373] Hardware name: MSI MS-7A39/B350M GAMING PRO (MS-7A39), BIOS 2.G0 04/27/2018 [ 253.138376] RIP: 0010:media_create_pad_link+0x1e0/0x200 [mc] [ 253.138378] Code: 26 fd ff ff 44 8b 4d d0 eb d9 0f 0b 41 b9 ea ff ff ff 44 89 c8 c3 0f 0b 41 b9 ea ff ff ff eb f2 0f 0b 41 b9 ea ff ff ff eb e8 <0f> 0b 41 b9 ea ff ff ff eb af 0f 0b 41 b9 ea ff ff ff eb a5 66 90 [ 253.138379] RSP: 0018:ffffb9ecc0ee7a78 EFLAGS: 00010246 [ 253.138380] RAX: ffff943f706c99d8 RBX: 0000000000000000 RCX: 0000000000000000 [ 253.138381] RDX: ffff943f613e0180 RSI: 0000000000000000 RDI: ffff943f706c9958 [ 253.138381] RBP: ffffb9ecc0ee7ab0 R08: 0000000000000001 R09: ffff943f613e0180 [ 253.138382] R10: ffff943f613e0180 R11: ffff943f706c9400 R12: 0000000000000000 [ 253.138383] R13: 0000000000000001 R14: ffff943f706c9958 R15: 0000000000000001 [ 253.138384] FS: 00007f3cd29ba540(0000) GS:ffff943f8ec00000(0000) knlGS:0000000000000000 [ 253.138385] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 253.138385] CR2: 000055f7de0ca830 CR3: 00000003dd208000 CR4: 00000000003406f0 [ 253.138386] Call Trace: [ 253.138392] media_create_pad_links+0x104/0x1b0 [mc] [ 253.138397] dvb_create_media_graph+0x350/0x5f0 [dvb_core] [ 253.138402] em28xx_dvb_init+0x5ea/0x2600 [em28xx_dvb] [ 253.138408] em28xx_register_extension+0x63/0xc0 [em28xx] [ 253.138410] ? 0xffffffffc039c000 [ 253.138412] em28xx_dvb_register+0x15/0x1000 [em28xx_dvb] [ 253.138416] do_one_initcall+0x71/0x250 [ 253.138418] ? do_init_module+0x27/0x22e [ 253.138421] ? _cond_resched+0x1a/0x50 [ 253.138423] ? kmem_cache_alloc_trace+0x1ec/0x270 [ 253.138425] ? __vunmap+0x1e3/0x240 [ 253.138427] do_init_module+0x5f/0x22e [ 253.138430] load_module+0x2525/0x2d40 [ 253.138436] __do_sys_finit_module+0xe5/0x120 [ 253.138438] ? __do_sys_finit_module+0xe5/0x120 [ 253.138442] __x64_sys_finit_module+0x1a/0x20 [ 253.138443] do_syscall_64+0x57/0x1b0 [ 253.138445] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 253.138446] RIP: 0033:0x7f3cd24dc839 [ 253.138448] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 [ 253.138449] RSP: 002b:00007ffe4fc514d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 253.138450] RAX: ffffffffffffffda RBX: 000055a9237f63f0 RCX: 00007f3cd24dc839 [ 253.138451] RDX: 0000000000000000 RSI: 000055a922c3ad2e RDI: 0000000000000000 [ 253.138451] RBP: 000055a922c3ad2e R08: 0000000000000000 R09: 0000000000000000 [ 253.138452] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 253.138453] R13: 000055a9237f5550 R14: 0000000000040000 R15: 000055a9237f63f0 [ 253.138456] ---[ end trace a60f19c54aa96ec4 ]--- [ 234.915628] ------------[ cut here ]------------ [ 234.915640] WARNING: CPU: 0 PID: 1502 at drivers/media/mc/mc-entity.c:669 media_create_pad_link+0x1e0/0x200 [mc] [ 234.915641] Modules linked in: si2157 lgdt3306a cx231xx_dvb(+) dvb_core cx231xx_alsa cx25840 cx231xx tveeprom cx2341x i2c_mux videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc ir_rc5_decoder rc_hauppauge mceusb rc_core edac_mce_amd kvm nls_iso8859 _1 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper efi_pstore wmi_bmof k10temp asix usbnet mii nouveau snd_hda_codec_realtek snd_hda_codec_generic input_leds ledtrig_audio snd_hda_codec_hdmi mxm_wmi snd_hda_intel video snd_intel_dspcf g ttm snd_hda_codec drm_kms_helper snd_hda_core drm snd_hwdep snd_seq_midi snd_seq_midi_event i2c_algo_bit snd_pcm snd_rawmidi fb_sys_fops snd_seq syscopyarea sysfillrect snd_seq_device sysimgblt snd_timer snd soundcore ccp mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tab les x_tables autofs4 vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio hid_generic usbhid hid i2c_piix4 ahci libahci wmi gpio_amdpt gpio_generic [ 234.915700] CPU: 0 PID: 1502 Comm: modprobe Not tainted 5.7.0-rc2+ #181 [ 234.915702] Hardware name: MSI MS-7A39/B350M GAMING PRO (MS-7A39), BIOS 2.G0 04/27/2018 [ 234.915709] RIP: 0010:media_create_pad_link+0x1e0/0x200 [mc] [ 234.915712] Code: 26 fd ff ff 44 8b 4d d0 eb d9 0f 0b 41 b9 ea ff ff ff 44 89 c8 c3 0f 0b 41 b9 ea ff ff ff eb f2 0f 0b 41 b9 ea ff ff ff eb e8 <0f> 0b 41 b9 ea ff ff ff eb af 0f 0b 41 b9 ea ff ff ff eb a5 66 90 [ 234.915714] RSP: 0018:ffffb9ecc1b6fa50 EFLAGS: 00010246 [ 234.915717] RAX: ffff943f8c94a9d8 RBX: 0000000000000000 RCX: 0000000000000000 [ 234.915719] RDX: ffff943f613e0900 RSI: 0000000000000000 RDI: ffff943f8c94a958 [ 234.915721] RBP: ffffb9ecc1b6fa88 R08: 0000000000000001 R09: ffff943f613e0900 [ 234.915723] R10: ffff943f613e0900 R11: ffff943f6b590c00 R12: 0000000000000000 [ 234.915724] R13: 0000000000000001 R14: ffff943f8c94a958 R15: 0000000000000001 [ 234.915727] FS: 00007f4ca3646540(0000) GS:ffff943f8ec00000(0000) knlGS:0000000000000000 [ 234.915729] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 234.915731] CR2: 00007fff7a53ba18 CR3: 00000003da614000 CR4: 00000000003406f0 [ 234.915733] Call Trace: [ 234.915745] media_create_pad_links+0x104/0x1b0 [mc] [ 234.915756] dvb_create_media_graph+0x350/0x5f0 [dvb_core] [ 234.915766] dvb_init.part.4+0x691/0x1360 [cx231xx_dvb] [ 234.915780] dvb_init+0x1a/0x20 [cx231xx_dvb] [ 234.915787] cx231xx_register_extension+0x71/0xa0 [cx231xx] [ 234.915791] ? 0xffffffffc042f000 [ 234.915796] cx231xx_dvb_register+0x15/0x1000 [cx231xx_dvb] [ 234.915802] do_one_initcall+0x71/0x250 [ 234.915807] ? do_init_module+0x27/0x22e [ 234.915811] ? _cond_resched+0x1a/0x50 [ 234.915816] ? kmem_cache_alloc_trace+0x1ec/0x270 [ 234.915820] ? __vunmap+0x1e3/0x240 [ 234.915826] do_init_module+0x5f/0x22e [ 234.915831] load_module+0x2525/0x2d40 [ 234.915848] __do_sys_finit_module+0xe5/0x120 [ 234.915850] ? __do_sys_finit_module+0xe5/0x120 [ 234.915862] __x64_sys_finit_module+0x1a/0x20 [ 234.915865] do_syscall_64+0x57/0x1b0 [ 234.915870] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 234.915872] RIP: 0033:0x7f4ca3168839 [ 234.915876] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 [ 234.915878] RSP: 002b:00007ffcea3db3b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 234.915881] RAX: ffffffffffffffda RBX: 000055af22c29340 RCX: 00007f4ca3168839 [ 234.915882] RDX: 0000000000000000 RSI: 000055af22c38390 RDI: 0000000000000001 [ 234.915884] RBP: 000055af22c38390 R08: 0000000000000000 R09: 0000000000000000 [ 234.915885] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 [ 234.915887] R13: 000055af22c29060 R14: 0000000000040000 R15: 0000000000000000 [ 234.915896] ---[ end trace a60f19c54aa96ec3 ]--- Signed-off-by:
Brad Love <brad@nextdimension.cc> Reviewed-by:
-
- 20 May, 2020 20 commits
-
-
Helen Koike authored
Move phy-rockchip-dphy-rx0 bindings to Documentation/devicetree/bindings/phy Verified with: make ARCH=arm64 dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml Signed-off-by:
Helen Koike <helen.koike@collabora.com> Acked-by:
-
Helen Koike authored
reg property is not used in Rockchip MIPI DPHY RX0 bindings, thus remove it. Suggested-by:
Johan Jonker <jbx6244@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Based on Yocto Aero's repository, the file name for the isp2401 is the same for the B0 release. So, unify it at the driver. Signed-off-by: -
Mauro Carvalho Chehab authored
The TODO list doesn't reflect the current status of the driver. Update it. Signed-off-by: -
Mauro Carvalho Chehab authored
When checking sh_css.c against the Yocto Aero's version, it can be noticed that some isp2401 dependencies may have been taken wrongly. Change the code to work like the Yocto Aero, as this driver was tested in the past with an ISP2401 device. Signed-off-by: -
Mauro Carvalho Chehab authored
Depending on the ISP-specific HAS_NO_INPUT_FORMATTER macro, some IRQs will be ignored by the driver. Yet, those keep happening, as reported by this debug print: [ 61.620746] atomisp-isp2 0000:00:03.0: atomisp_css_irq_enable: css irq info 0x00000004: disable. Causing this warning: [ 61.620749] atomisp-isp2 0000:00:03.0: atomisp_css_irq_enable:Invalid irq info. Well, if this is a normal situation, just ignore it without warnings. Signed-off-by: -
Mauro Carvalho Chehab authored
Add a debug printk to show what IRQ is popping up. Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of using it only if system memory is below 2GB, don't use it at all. The problem is that the code there is not compatible anymore with modern Kernels: [ 179.552797] virt_to_cache: Object is not a Slab page! [ 179.552821] WARNING: CPU: 0 PID: 1414 at mm/slab.h:475 cache_from_obj+0xab/0xf0 [ 179.552824] Modules linked in: ccm(E) nft_fib_inet(E) nft_fib_ipv4(E) nft_fib_ipv6(E) nft_fib(E) nft_reject_inet(E) nf_reject_ipv4(E) nf_reject_ipv6(E) nft_reject(E) nft_ct(E) nft_chain_nat(E) ip6table_nat(E) ip6table_mangle(E) ip6table_raw(E) ip6table_security(E) iptable_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) libcrc32c(E) nf_defrag_ipv4(E) iptable_mangle(E) iptable_raw(E) iptable_security(E) ip_set(E) nf_tables(E) nfnetlink(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) cmac(E) bnep(E) sunrpc(E) vfat(E) fat(E) mei_hdcp(E) snd_soc_sst_cht_bsw_rt5645(E) gpio_keys(E) intel_rapl_msr(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) asus_nb_wmi(E) ath10k_pci(E) ghash_clmulni_intel(E) ath10k_core(E) intel_cstate(E) wdat_wdt(E) pcspkr(E) ath(E) mac80211(E) intel_chtdc_ti_pwrbtn(E) joydev(E) btusb(E) btrtl(E) btbcm(E) btintel(E) libarc4(E) bluetooth(E) cfg80211(E) ecdh_generic(E) ecc(E) mei_txe(E) mei(E) lpc_ich(E) [ 179.552887] hid_sensor_accel_3d(E) hid_sensor_gyro_3d(E) hid_sensor_trigger(E) hid_sensor_iio_common(E) industrialio_triggered_buffer(E) kfifo_buf(E) industrialio(E) atomisp_ov2680(CE) snd_soc_rt5645(E) snd_intel_sst_acpi(E) snd_soc_rl6231(E) snd_intel_sst_core(E) snd_soc_sst_atom_hifi2_platform(E) intel_hid(E) snd_soc_acpi_intel_match(E) spi_pxa2xx_platform(E) snd_soc_acpi(E) snd_soc_core(E) snd_compress(E) dw_dmac(E) snd_hdmi_lpe_audio(E) int3400_thermal(E) int3406_thermal(E) snd_seq(E) acpi_thermal_rel(E) int3403_thermal(E) atomisp(CE) snd_seq_device(E) snd_pcm(E) intel_int0002_vgpio(E) soc_button_array(E) acpi_pad(E) intel_xhci_usb_role_switch(E) snd_timer(E) videobuf_vmalloc(E) videobuf_core(E) snd(E) atomisp_gmin_platform(CE) soundcore(E) videodev(E) processor_thermal_device(E) intel_soc_dts_iosf(E) mc(E) intel_rapl_common(E) int340x_thermal_zone(E) ip_tables(E) hid_sensor_hub(E) intel_ishtp_loader(E) intel_ishtp_hid(E) mmc_block(E) hid_multitouch(E) crc32c_intel(E) i915(E) [ 179.552936] hid_asus(E) i2c_algo_bit(E) asus_wmi(E) sparse_keymap(E) rfkill(E) drm_kms_helper(E) intel_ish_ipc(E) intel_ishtp(E) drm(E) wmi(E) video(E) i2c_hid(E) pwm_lpss_platform(E) pwm_lpss(E) sdhci_acpi(E) sdhci(E) mmc_core(E) fuse(E) [ 179.552961] CPU: 0 PID: 1414 Comm: v4l2grab Tainted: G C EL 5.7.0-rc2+ #42 [ 179.552963] Hardware name: ASUSTeK COMPUTER INC. T101HA/T101HA, BIOS T101HA.306 04/23/2019 [ 179.552968] RIP: 0010:cache_from_obj+0xab/0xf0 [ 179.552973] Code: c3 31 c0 80 3d 1c 38 72 01 00 75 f0 48 c7 c6 20 12 06 9f 48 c7 c7 10 f3 37 9f 48 89 04 24 c6 05 01 38 72 01 01 e8 2c 99 e0 ff <0f> 0b 48 8b 04 24 eb ca 48 8b 57 58 48 8b 48 58 48 c7 c6 30 12 06 [ 179.552976] RSP: 0018:ffffaf1f00c3fae0 EFLAGS: 00010282 [ 179.552980] RAX: 0000000000000029 RBX: 00000000000003ff RCX: 0000000000000007 [ 179.552983] RDX: 00000000fffffff8 RSI: 0000000000000082 RDI: ffff9cb6bbc19cc0 [ 179.552985] RBP: 0000000001000000 R08: 00000000000005a4 R09: ffffaf1f00c3f970 [ 179.552988] R10: 0000000000000005 R11: 0000000000000000 R12: ffffffffc0713da0 [ 179.552991] R13: ffff9cb5a7bb1000 R14: 0000000001000000 R15: ffff9cb5a7bb1000 [ 179.552995] FS: 0000000000000000(0000) GS:ffff9cb6bbc00000(0000) knlGS:0000000000000000 [ 179.552998] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 179.553000] CR2: 00007fe780544400 CR3: 000000002480a000 CR4: 00000000001006f0 [ 179.553003] Call Trace: [ 179.553015] kmem_cache_free+0x19/0x180 [ 179.553070] mmu_l2_unmap+0xd1/0x100 [atomisp] [ 179.553113] ? __bo_merge+0x8f/0xa0 [atomisp] [ 179.553155] mmu_unmap+0xd0/0xf0 [atomisp] [ 179.553198] hmm_bo_unbind+0x62/0xb0 [atomisp] [ 179.553240] hmm_free+0x44/0x60 [atomisp] Signed-off-by: -
Mauro Carvalho Chehab authored
Calling acpi_bus_get_device() may end allocating resources that aren't freed. So, add a notice about that, as, if those drivers get out of staging, we may need some changes. Fixes: 0d64e942 ("media: atomisp: Add some ACPI detection info") Signed-off-by:
-
Mauro Carvalho Chehab authored
The memory management code for atomisp is complex: it has 2 extra pools (plus some ION-specific code). The code for those extra pools are complex, and there are even some parts of code over there that were forked from some mm/ code, probably from Kernel 3.10. Let's just use a single one, in order to make the driver simpler. Signed-off-by: -
Mauro Carvalho Chehab authored
Camera cannot be set on power off mode. Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of trying to send multiple bytes at the same time, just go one by one, like the upstream driver does. Signed-off-by: -
Mauro Carvalho Chehab authored
This isn't really used, so get rid, in order to make the code simpler. Signed-off-by: -
Mauro Carvalho Chehab authored
There is an ov2680 driver mainstream. Use the read/write routines from it, as the ones inside this driver are generating some errors: ov2680 i2c-OVTI2680:00: ov2680_i2c_write: i2c write reg=0x3086, value 0x00, error -121 Maybe the code that changes from/to BE are not right. Signed-off-by: -
Mauro Carvalho Chehab authored
Change some code at ov2680 for it to better report what's happening there at sensor's level. Signed-off-by: -
Mauro Carvalho Chehab authored
The sensor should finish its init before atomisp driver, as otherwise the atomisp driver won't be able to talk with it. So, we need to turn atomisp_gmin_platform into a module again, for it to not depend on atomisp driver to finish probing, and add some delay at atomisp to let the sensor driver to finish probing. Yeah, this is hacky. The real solution here would be to use the async framework, but for now, our goal is to make the driver to work. So, let's postpone such change to be done later. Signed-off-by: -
Mauro Carvalho Chehab authored
The current code causes ISP2401 to power down and never return back to live, causing the driver to crash. Fix it by commenting out the bad code. It should be noticed that the Yocto Aero code has something similar to it. Maybe the issue is related to an ISP bug (or maybe PM is controlled on a different way for this hardware). Signed-off-by: -
Mauro Carvalho Chehab authored
The value returned by BIOS is 1. Fix it at the driver, as it won't read this from EFI. Signed-off-by: -
Mauro Carvalho Chehab authored
The mmu mapping logic uses a different logic depending on the RAM size: if it is lower than 2GB, it uses kmem_cache_zalloc(), but if memory is bigger than that, it uses its own way to allocate memory. Yet, when freeing, it uses kmem_cache_free() for any cases. On recent Kernels, slab tracks the memory allocated on it, with causes those warnings: virt_to_cache: Object is not a Slab page! WARNING: CPU: 0 PID: 758 at mm/slab.h:475 cache_from_obj+0xab/0xf0 Modules linked in: snd_soc_sst_cht_bsw_rt5645(E) mei_hdcp(E) gpio_keys(E) intel_rapl_msr(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) ghash_clmulni_intel(E) atomisp_ov2680(CE) intel_cstate(E) asus_nb_wmi(E) wdat_wdt(E) pcspkr(E) ath10k_pci(E) ath10k_core(E) intel_chtdc_ti_pwrbtn(E) ath(E) mac80211(E) btusb(E) joydev(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) libarc4(E) ecdh_generic(E) cfg80211(E) ecc(E) hid_sensor_gyro_3d(E) hid_sensor_accel_3d(E) hid_sensor_trigger(E) hid_sensor_iio_common(E) industrialio_triggered_buffer(E) kfifo_buf(E) industrialio(E) atomisp(CE) videobuf_vmalloc(E) videobuf_core(E) videodev(E) mc(E) snd_soc_rt5645(E) snd_soc_rl6231(E) snd_intel_sst_acpi(E) snd_intel_sst_core(E) snd_soc_sst_atom_hifi2_platform(E) snd_soc_acpi_intel_match(E) intel_hid(E) spi_pxa2xx_platform(E) snd_soc_acpi(E) snd_soc_core(E) snd_compress(E) dw_dmac(E) intel_xhci_usb_role_switch(E) int3406_thermal(E) snd_hdmi_lpe_audio(E) int3403_thermal(E) int3400_thermal(E) acpi_thermal_rel(E) snd_seq(E) intel_int0002_vgpio(E) soc_button_array(E) snd_seq_device(E) acpi_pad(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) lpc_ich(E) mei_txe(E) mei(E) processor_thermal_device(E) intel_soc_dts_iosf(E) intel_rapl_common(E) int340x_thermal_zone(E) ip_tables(E) hid_sensor_hub(E) intel_ishtp_loader(E) intel_ishtp_hid(E) mmc_block(E) hid_multitouch(E) crc32c_intel(E) i915(E) i2c_algo_bit(E) drm_kms_helper(E) hid_asus(E) asus_wmi(E) sparse_keymap(E) rfkill(E) drm(E) intel_ish_ipc(E) intel_ishtp(E) wmi(E) video(E) i2c_hid(E) sdhci_acpi(E) sdhci(E) mmc_core(E) pwm_lpss_platform(E) pwm_lpss(E) fuse(E) CPU: 0 PID: 758 Comm: v4l_id Tainted: G C E 5.7.0-rc2+ #40 Hardware name: ASUSTeK COMPUTER INC. T101HA/T101HA, BIOS T101HA.306 04/23/2019 RIP: 0010:cache_from_obj+0xab/0xf0 Code: c3 31 c0 80 3d 1c 38 72 01 00 75 f0 48 c7 c6 20 12 06 b5 48 c7 c7 10 f3 37 b5 48 89 04 24 c6 05 01 38 72 01 01 e8 2c 99 e0 ff <0f> 0b 48 8b 04 24 eb ca 48 8b 57 58 48 8b 48 58 48 c7 c6 30 12 06 RSP: 0018:ffffb0a4c07cfb10 EFLAGS: 00010282 RAX: 0000000000000029 RBX: 0000000000000048 RCX: 0000000000000000 RDX: ffffa004fbca5b80 RSI: ffffa004fbc19cc8 RDI: ffffa004fbc19cc8 RBP: 0000000000c49000 R08: 00000000000004f7 R09: 0000000000000001 R10: 0000000000aaaaaa R11: ffffffffb50e0600 R12: ffffffffc0be0a00 R13: ffffa003f2448000 R14: 0000000000c49000 R15: ffffa003f2448000 FS: 00007f9060c9cb80(0000) GS:ffffa004fbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559fc55b8000 CR3: 0000000165b02000 CR4: 00000000001006f0 Call Trace: kmem_cache_free+0x19/0x180 mmu_l2_unmap+0xd1/0x100 [atomisp] mmu_unmap+0xd0/0xf0 [atomisp] hmm_bo_unbind+0x62/0xb0 [atomisp] hmm_free+0x44/0x60 [atomisp] ia_css_spctrl_unload_fw+0x30/0x50 [atomisp] ia_css_uninit+0x3a/0x90 [atomisp] atomisp_open+0x50b/0x5c0 [atomisp] v4l2_open+0x85/0xf0 [videodev] chrdev_open+0xdd/0x210 ? cdev_device_add+0xc0/0xc0 do_dentry_open+0x13a/0x380 path_openat+0xa9a/0xfe0 do_filp_open+0x75/0x100 ? __check_object_size+0x12e/0x13c ? __alloc_fd+0x44/0x150 do_sys_openat2+0x8a/0x130 __x64_sys_openat+0x46/0x70 do_syscall_64+0x5b/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Solve it by calling free_page() directly Signed-off-by: -
Mauro Carvalho Chehab authored
Simplify the hmm_bo a little bit by removing this macro. This will avoid printing twice errors when allocations happen. Signed-off-by:
-
