A sysctl variable is accessed concurrently, and there is always a chance
of data-race.  So, all readers and writers need some basic protection to
avoid load/store-tearing.

This patch changes proc_dointvec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side.  For now,
proc_dointvec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A sysctl variable is accessed concurrently, and there is always a chance
of data-race.  So, all readers and writers need some basic protection to
avoid load/store-tearing.

This patch changes proc_douintvec() to use READ_ONCE() and WRITE_ONCE()
internally to fix data-races on the sysctl side.  For now, proc_douintvec()
itself is tolerant to a data-race, but we still need to add annotations on
the other subsystem's side.

Fixes: e7d316a0 ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A sysctl variable is accessed concurrently, and there is always a chance
of data-race.  So, all readers and writers need some basic protection to
avoid load/store-tearing.

This patch changes proc_dointvec() to use READ_ONCE() and WRITE_ONCE()
internally to fix data-races on the sysctl side.  For now, proc_dointvec()
itself is tolerant to a data-race, but we still need to add annotations on
the other subsystem's side.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The trace event sock_exceed_buf_limit saves the prot->sysctl_mem pointer
and then dereferences it in the TP_printk() portion. This is unsafe as the
TP_printk() portion is executed at the time the buffer is read. That is,
it can be seconds, minutes, days, months, even years later. If the proto
is freed, then this dereference will can also lead to a kernel crash.

Instead, save the sysctl_mem array into the ring buffer and have the
TP_printk() reference that instead. This is the proper and safe way to
read pointers in trace events.

Link: https://lore.kernel.org/all/20220706052130.16368-12-kuniyu@amazon.com/

Cc: stable@vger.kernel.org
Fixes: 3847ce32 ("core: add tracepoints for queueing skb to rcvbuf")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Accidentally noticed, that this driver is the only user of
while (time_after(jiffies...)).

It looks like typo, because likely this while loop will finish after 1st
iteration, because time_after() returns true when 1st argument _is after_
2nd one.

There is one possible problem with this poll loop: the scheduler could put
the thread to sleep, and it does not get woken up for
OCELOT_FDMA_CH_SAFE_TIMEOUT_US. During that time, the hardware has done
its thing, but you exit the while loop and return -ETIMEDOUT.

Fix it by using sane poll API that avoids all problems described above

Fixes: 753a026c ("net: ocelot: add FDMA support")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220706132845.27968-1-paskripkin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5 fixes 2022-07-06

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2022-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Ring the TX doorbell on DMA errors
  net/mlx5e: Fix capability check for updating vnic env counters
  net/mlx5e: CT: Use own workqueue instead of mlx5e priv
  net/mlx5: Lag, correct get the port select mode str
  net/mlx5e: Fix enabling sriov while tc nic rules are offloaded
  net/mlx5e: kTLS, Fix build time constant test in RX
  net/mlx5e: kTLS, Fix build time constant test in TX
  net/mlx5: Lag, decouple FDB selection and shared FDB
  net/mlx5: TC, allow offload from uplink to other PF's VF
====================

Link: https://lore.kernel.org/r/20220706231309.38579-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Renaming interfaces using udevd depends on the interface being registered
before its netdev is registered. Otherwise, udevd reads an empty
phys_port_name value, resulting in the interface not being renamed.

Fix this by registering the interface before registering its netdev
by invoking am65_cpsw_nuss_register_devlink() before invoking
register_netdev() for the interface.

Move the function call to devlink_port_type_eth_set(), invoking it after
register_netdev() is invoked, to ensure that netlink notification for the
port state change is generated after the netdev is completely initialized.

Fixes: 58356eb3 ("net: ti: am65-cpsw-nuss: Add devlink support")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20220706070208.12207-1-s-vadapalli@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is a long-standing issue with the Synopsys DWC Ethernet driver
for Tegra194 where random system crashes have been observed [0]. The
problem occurs when the split header feature is enabled in the stmmac
driver. In the bad case, a larger than expected buffer length is
received and causes the calculation of the total buffer length to
overflow. This results in a very large buffer length that causes the
kernel to crash. Why this larger buffer length is received is not clear,
however, the feedback from the NVIDIA design team is that the split
header feature is not supported for Tegra194. Therefore, disable split
header support for Tegra194 to prevent these random crashes from
occurring.

[0] https://lore.kernel.org/linux-tegra/b0b17697-f23e-8fa5-3757-604a86f3a095@nvidia.com/

Fixes: 67afd6d1 ("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20220706083913.13750-1-jonathanh@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf, netfilter, can, and bluetooth.

  Current release - regressions:

   - bluetooth: fix deadlock on hci_power_on_sync

  Previous releases - regressions:

   - sched: act_police: allow 'continue' action offload

   - eth: usbnet: fix memory leak in error case

   - eth: ibmvnic: properly dispose of all skbs during a failover

  Previous releases - always broken:

   - bpf:
       - fix insufficient bounds propagation from
         adjust_scalar_min_max_vals
       - clear page contiguity bit when unmapping pool

   - netfilter: nft_set_pipapo: release elements in clone from
     abort path

   - mptcp: netlink: issue MP_PRIO signals from userspace PMs

   - can:
       - rcar_canfd: fix data transmission failed on R-Car V3U
       - gs_usb: gs_usb_open/close(): fix memory leak

  Misc:

   - add Wenjia as SMC maintainer"

* tag 'net-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
  wireguard: Kconfig: select CRYPTO_CHACHA_S390
  crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations
  wireguard: selftests: use microvm on x86
  wireguard: selftests: always call kernel makefile
  wireguard: selftests: use virt machine on m68k
  wireguard: selftests: set fake real time in init
  r8169: fix accessing unset transport header
  net: rose: fix UAF bug caused by rose_t0timer_expiry
  usbnet: fix memory leak in error case
  Revert "tls: rx: move counting TlsDecryptErrors for sync"
  mptcp: update MIB_RMSUBFLOW in cmd_sf_destroy
  mptcp: fix local endpoint accounting
  selftests: mptcp: userspace PM support for MP_PRIO signals
  mptcp: netlink: issue MP_PRIO signals from userspace PMs
  mptcp: Acquire the subflow socket lock before modifying MP_PRIO flags
  mptcp: Avoid acquiring PM lock for subflow priority changes
  mptcp: fix locking in mptcp_nl_cmd_sf_destroy()
  net/mlx5e: Fix matchall police parameters validation
  net/sched: act_police: allow 'continue' action offload
  net: lan966x: hardcode the number of external ports
  ...

Pull pin control fixes from Linus Walleij:

 - Tag Intel pin control as supported in MAINTAINERS

 - Fix a NULL pointer exception in the Aspeed driver

 - Correct some NAND functions in the Sunxi A83T driver

 - Use the right offset for some Sunxi pins

 - Fix a zero base offset in the Freescale (NXP) i.MX93

 - Fix the IRQ support in the STM32 driver

* tag 'pinctrl-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: stm32: fix optional IRQ support to gpios
  pinctrl: imx: Add the zero base flag for imx93
  pinctrl: sunxi: sunxi_pconf_set: use correct offset
  pinctrl: sunxi: a83t: Fix NAND function name for some pins
  pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux()
  MAINTAINERS: Update Intel pin control to Supported

These are indeed "should not happen" situations, but it turns out recent
changes made the 'task_is_stopped_or_trace()' case trigger (fix for that
exists, is pending more testing), and the BUG_ON() makes it
unnecessarily hard to actually debug for no good reason.

It's been that way for a long time, but let's make it clear: BUG_ON() is
not good for debugging, and should never be used in situations where you
could just say "this shouldn't happen, but we can continue".

Use WARN_ON_ONCE() instead to make sure it gets logged, and then just
continue running.  Instead of making the system basically unusuable
because you crashed the machine while potentially holding some very core
locks (eg this function is commonly called while holding 'tasklist_lock'
for writing).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Jason A. Donenfeld says:

====================
wireguard patches for 5.19-rc6

1) A few small fixups to the selftests, per usual. Of particular note is
   a fix for a test flake that occurred on especially fast systems that
   boot in less than a second.

2) An addition during this cycle of some s390 crypto interacted with the
   way wireguard selects dependencies, resulting in linker errors
   reported by the kernel test robot. So Vladis sent in a patch for
   that, which also required a small preparatory fix moving some Kconfig
   symbols around.
====================

Link: https://lore.kernel.org/r/20220707003157.526645-1-Jason@zx2c4.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Select the new implementation of CHACHA20 for S390 when available.
It is faster than the generic software implementation, but also prevents
some linker errors in certain situations.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-kernel/202207030630.6SZVkrWf-lkp@intel.com/Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Various accelerated software implementation Kconfig values for S390 were
mistakenly placed into drivers/crypto/Kconfig, even though they're
mainly just SIMD code and live in arch/s390/crypto/ like usual. This
gives them the very unusual dependency on CRYPTO_HW, which leads to
problems elsewhere.

This patch fixes the issue by moving the Kconfig values for non-hardware
drivers into the usual place in crypto/Kconfig.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This makes for faster tests, faster compile time, and allows us to ditch
ACPI finally.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

These selftests are used for much more extensive changes than just the
wireguard source files. So always call the kernel's build file, which
will do something or nothing after checking the whole tree, per usual.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This should be a bit more stable hopefully.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Not all platforms have an RTC, and rather than trying to force one into
each, it's much easier to just set a fixed time. This is necessary
because WireGuard's latest handshakes parameter is returned in wallclock
time, and if the system time isn't set, and the system is really fast,
then this returns 0, which trips the test.

Turning this on requires setting CONFIG_COMPAT_32BIT_TIME=y, as musl
doesn't support settimeofday without it.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

66e4c8d9 ("net: warn if transport header was not set") added
a check that triggers a warning in r8169, see [0].

The commit referenced in the Fixes tag refers to the change from
which the patch applies cleanly, there's nothing wrong with this
commit. It seems the actual issue (not bug, because the warning
is harmless here) was introduced with bdfa4ed6
("r8169: use Giant Send").

[0] https://bugzilla.kernel.org/show_bug.cgi?id=216157

Fixes: 8d520b4d ("r8169: work around RTL8125 UDP hw bug")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Tested-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/1b2c2b29-3dc0-f7b6-5694-97ec526d51a0@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There are UAF bugs caused by rose_t0timer_expiry(). The
root cause is that del_timer() could not stop the timer
handler that is running and there is no synchronization.
One of the race conditions is shown below:

    (thread 1)             |        (thread 2)
                           | rose_device_event
                           |   rose_rt_device_down
                           |     rose_remove_neigh
rose_t0timer_expiry        |       rose_stop_t0timer(rose_neigh)
  ...                      |         del_timer(&neigh->t0timer)
                           |         kfree(rose_neigh) //[1]FREE
  neigh->dce_mode //[2]USE |

The rose_neigh is deallocated in position [1] and use in
position [2].

The crash trace triggered by POC is like below:

BUG: KASAN: use-after-free in expire_timers+0x144/0x320
Write of size 8 at addr ffff888009b19658 by task swapper/0/0
...
Call Trace:
 <IRQ>
 dump_stack_lvl+0xbf/0xee
 print_address_description+0x7b/0x440
 print_report+0x101/0x230
 ? expire_timers+0x144/0x320
 kasan_report+0xed/0x120
 ? expire_timers+0x144/0x320
 expire_timers+0x144/0x320
 __run_timers+0x3ff/0x4d0
 run_timer_softirq+0x41/0x80
 __do_softirq+0x233/0x544
 ...

This patch changes rose_stop_ftimer() and rose_stop_t0timer()
in rose_remove_neigh() to del_timer_sync() in order that the
timer handler could be finished before the resources such as
rose_neigh and so on are deallocated. As a result, the UAF
bugs could be mitigated.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220705125610.77971-1-duoming@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

usbnet_write_cmd_async() mixed up which buffers
need to be freed in which error case.

v2: add Fixes tag
v3: fix uninitialized buf pointer

Fixes: 877bd862 ("usbnet: introduce usbnet 3 command helpers")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220705125351.17309-1-oneukum@suse.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

TX doorbells may be postponed, because sometimes the driver knows that
another packet follows (for example, when xmit_more is true, or when a
MPWQE session is closed before transmitting a packet).

However, the DMA mapping may fail for the next packet, in which case a
new WQE is not posted, the doorbell isn't updated either, and the
transmission of the previous packet will be delayed indefinitely.

This commit fixes the described rare error flow by posting a NOP and
ringing the doorbell on errors to flush all the previous packets. The
MPWQE session is closed before that. DMA mapping in the MPWQE flow is
moved to the beginning of mlx5e_sq_xmit_mpwqe, because empty sessions
are not allowed. Stop room always has enough space for a NOP, because
the actual TX WQE is not posted.

Fixes: e586b3b0 ("net/mlx5: Ethernet Datapath files")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The existing capability check for vnic env counters only checks for
receive steering discards, although we need the counters update for the
exposed internal queue oob counter as well. This could result in the
latter counter not being updated correctly when the receive steering
discards counter is not supported.
Fix that by checking whether any counter is supported instead of only
the steering counter capability.

Fixes: 0cfafd4b ("net/mlx5e: Add device out of buffer counter")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Allocate a ct priv workqueue instead of using mlx5e priv one
so flushing will only be of related CT entries.
Also move flushing of the workqueue before rhashtable destroy
otherwise entries won't be valid.

Fixes: b069e14f ("net/mlx5e: CT: Fix queued up restore put() executing after relevant ft release")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

mode & mode_flags is updated at the end of mlx5_activate_lag which
may not reflect the actual mode as shown in below logic:
    mlx5_activate_lag(struct mlx5_lag *ldev,
    |-- unsigned long flags = 0;
    |-- err = mlx5_lag_set_flags(ldev, mode, tracker, shared_fdb, &flags);
    |-- err = mlx5_create_lag(ldev, tracker, mode, flags);
              |-- mlx5_get_str_port_sel_mode(ldev);
    |-- ldev->mode = mode;
    |-- ldev->mode_flags = flags;
Use mode & flag as parameters to get port select mode info.

Fixes: 94db3317 ("net/mlx5: Support multiport eswitch mode")
Signed-off-by: Liu, Changcheng <jerrliu@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

There is a total of four 4M entries flow tables. In sriov disabled
mode, ct, ct_nat and post_act take three of them. When adding the
first tc nic rule in this mode, it will take another 4M table
for the tc <chain,prio> table. If user then enables sriov, the legacy
flow table tries to take another 4M and fails, and so enablement fails.

To fix that, have legacy fdb take the next available maximum
size from the fs ft pool.

Fixes: 4a98544d ("net/mlx5: Move chains ft pool to be used by all firmware steering")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Use the correct constant (TLS_DRIVER_STATE_SIZE_RX) in the comparison
against the size of the private RX TLS driver context.

Fixes: 1182f365 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Use the correct constant (TLS_DRIVER_STATE_SIZE_TX) in the comparison
against the size of the private TX TLS driver context.

Fixes: df8d8667 ("net/mlx5e: kTLS, Use kernel API to extract private offload context")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Multiport eswitch is required to use native FDB selection instead of
affinity, This was achieved by passing the shared_fdb flag down
the HW lag creation path. While it did accomplish the goal of setting
FDB selection mode to native, it had the side effect of also
creating a shared FDB configuration.

This created a few issues:
- TC rules are inserted into a non active FDB, which means traffic isn't
  offloaded as all traffic will reach only a single FDB.
- All wire traffic is treated as if a single physical port received it; while
  this is true for a bond configuration, this shouldn't be the case for
  multiport eswitch.

Create a new flag MLX5_LAG_MODE_FLAG_FDB_SEL_MODE_NATIVE
to indicate what FDB selection mode should be used.

Fixes: 94db3317 ("net/mlx5: Support multiport eswitch mode")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Redirecting traffic from uplink to a VF is a legal operation of
mulitport eswitch mode. Remove the limitation.

Fixes: 94db3317 ("net/mlx5: Support multiport eswitch mode")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Pull OpenRISC fixes from Stafford Horne:
 "Fixups for OpenRISC found during recent testing:

   - An OpenRISC irqchip fix to stop acking level interrupts which was
     causing issues on SMP platforms

   - A comment typo fix in our unwinder code"

* tag 'for-linus' of https://github.com/openrisc/linux:
  openrisc: unwinder: Fix grammar issue in comment
  irqchip: or1k-pic: Undefine mask_ack for level triggered hardware

Pull sound fixes from Takashi Iwai:
 "This became largish as it includes the pending ASoC fixes.

  Almost all changes are device-specific small fixes, while many of them
  are coverage for mixer issues that were detected by selftest. In
  addition, usual suspects for HD/USB-audio are there"

* tag 'sound-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (43 commits)
  ALSA: cs46xx: Fix missing snd_card_free() call at probe error
  ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)
  ALSA: usb-audio: Add quirk for Fiero SC-01
  ALSA: hda/realtek: Add quirk for Clevo L140PU
  ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices
  ASoC: madera: Fix event generation for rate controls
  ASoC: madera: Fix event generation for OUT1 demux
  ASoC: cs47l15: Fix event generation for low power mux control
  ASoC: cs35l41: Add ASP TX3/4 source to register patch
  ASoC: dapm: Initialise kcontrol data for mux/demux controls
  ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error
  ASoC: cs35l41: Correct some control names
  ASoC: wm5110: Fix DRE control
  ASoC: wm_adsp: Fix event for preloader
  MAINTAINERS: update ASoC Qualcomm maintainer email-id
  ASoC: rockchip: i2s: switch BCLK to GPIO
  ASoC: SOF: Intel: disable IMR boot when resuming from ACPI S4 and S5 states
  ASoC: SOF: pm: add definitions for S4 and S5 states
  ASoC: SOF: pm: add explicit behavior for ACPI S1 and S2
  ASoC: SOF: Intel: hda: Fix compressed stream position tracking
  ...

This reverts commit 284b4d93.
When using TLS device offload and coming from tls_device_reencrypt()
flow, -EBADMSG error in tls_do_decryption() should not be counted
towards the TLSTlsDecryptError counter.

Move the counter increase back to the decrypt_internal() call site in
decrypt_skb_update().
This also fixes an issue where:
	if (n_sgin < 1)
		return -EBADMSG;

Errors in decrypt_internal() were not counted after the cited patch.

Fixes: 284b4d93 ("tls: rx: move counting TlsDecryptErrors for sync")
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: Path manager fixes for 5.19

The MPTCP userspace path manager is new in 5.19, and these patches fix
some issues in that new code.

Patches 1-3 fix path manager locking issues.

Patches 4 and 5 allow userspace path managers to change priority of
established subflows using the existing MPTCP_PM_CMD_SET_FLAGS generic
netlink command. Includes corresponding self test update.

Patches 6 and 7 fix accounting of available endpoint IDs and the
MPTCP_MIB_RMSUBFLOW counter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch increases MPTCP_MIB_RMSUBFLOW mib counter in userspace pm
destroy subflow function mptcp_nl_cmd_sf_destroy() when removing subflow.

Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In mptcp_pm_nl_rm_addr_or_subflow() we always mark as available
the id corresponding to the just removed address.

The used bitmap actually tracks only the local IDs: we must
restrict the operation when a (local) subflow is removed.

Fixes: a88c9e49 ("mptcp: do not block subflows creation on errors")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change updates the testing sample (pm_nl_ctl) to exercise
the updated MPTCP_PM_CMD_SET_FLAGS command for userspace PMs to
issue MP_PRIO signals over the selected subflow.

E.g. ./pm_nl_ctl set 10.0.1.2 port 47234 flags backup token 823274047 rip 10.0.1.1 rport 50003

userspace_pm.sh has a new selftest that invokes this command.

Fixes: 259a834f ("selftests: mptcp: functional tests for the userspace PM type")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change updates MPTCP_PM_CMD_SET_FLAGS to allow userspace PMs
to issue MP_PRIO signals over a specific subflow selected by
the connection token, local and remote address+port.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/286
Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When setting up a subflow's flags for sending MP_PRIO MPTCP options, the
subflow socket lock was not held while reading and modifying several
struct members that are also read and modified in mptcp_write_options().

Acquire the subflow socket lock earlier and send the MP_PRIO ACK with
that lock already acquired. Add a new variant of the
mptcp_subflow_send_ack() helper to use with the subflow lock held.

Fixes: 06706542 ("mptcp: add the outgoing MP_PRIO support")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The in-kernel path manager code for changing subflow flags acquired both
the msk socket lock and the PM lock when possibly changing the "backup"
and "fullmesh" flags. mptcp_pm_nl_mp_prio_send_ack() does not access
anything protected by the PM lock, and it must release and reacquire
the PM lock.

By pushing the PM lock to where it is needed in mptcp_pm_nl_fullmesh(),
the lock is only acquired when the fullmesh flag is changed and the
backup flag code no longer has to release and reacquire the PM lock. The
change in locking context requires the MIB update to be modified - move
that to a better location instead.

This change also makes it possible to call
mptcp_pm_nl_mp_prio_send_ack() for the userspace PM commands without
manipulating the in-kernel PM lock.

Fixes: 0f9f696a ("mptcp: add set_flags command in PM netlink")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>