- 12 Sep, 2020 40 commits
-
-
Takashi Sakamoto authored
commit acd46a6b upstream. Avid Adrenaline is reported that ALSA firewire-digi00x driver is bound to. However, as long as he investigated, the design of this model is hardly similar to the one of Digi 00x family. It's better to exclude the model from modalias of ALSA firewire-digi00x driver. This commit changes device entries so that the model is excluded. $ python3 crpp < ~/git/am-config-rom/misc/avid-adrenaline.img ROM header and bus information block ----------------------------------------------------------------- 400 04203a9c bus_info_length 4, crc_length 32, crc 15004 404 31333934 bus_name "1394" 408 e064a002 irmc 1, cmc 1, isc 1, bmc 0, cyc_clk_acc 100, max_rec 10 (2048) 40c 00a07e01 company_id 00a07e | 410 00085257 device_id 0100085257 | EUI-64 00a07e0100085257 root directory ----------------------------------------------------------------- 414 0005d08c directory_length 5, crc 53388 418 0300a07e vendor 41c 8100000c --> descriptor leaf at 44c 420 0c008380 node capabilities 424 8d000002 --> eui-64 leaf at 42c 428 d1000004 --> unit directory at 438 eui-64 leaf at 42c ----------------------------------------------------------------- 42c 0002410f leaf_length 2, crc 16655 430 00a07e01 company_id 00a07e | 434 00085257 device_id 0100085257 | EUI-64 00a07e0100085257 unit directory at 438 ----------------------------------------------------------------- 438 0004d6c9 directory_length 4, crc 54985 43c 1200a02d specifier id: 1394 TA 440 13014001 version: Vender Unique and AV/C 444 17000001 model 448 81000009 --> descriptor leaf at 46c descriptor leaf at 44c ----------------------------------------------------------------- 44c 00077205 leaf_length 7, crc 29189 450 00000000 textual descriptor 454 00000000 minimal ASCII 458 41766964 "Avid" 45c 20546563 " Tec" 460 686e6f6c "hnol" 464 6f677900 "ogy" 468 00000000 descriptor leaf at 46c ----------------------------------------------------------------- 46c 000599a5 leaf_length 5, crc 39333 470 00000000 textual descriptor 474 00000000 minimal ASCII 478 41647265 "Adre" 47c 6e616c69 "nali" 480 6e650000 "ne" Reported-by:
Simon Wood <simon@mungewell.org> Fixes: 9edf723f ("ALSA: firewire-digi00x: add skeleton for Digi 002/003 family") Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20200823075545.56305-1-o-takashi@sakamocchi.jpSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 949a1ebe upstream. The PCM OSS mulaw plugin has a check of the format of the counter part whether it's a linear format. The check is with snd_BUG_ON() that emits WARN_ON() when the debug config is set, and it confuses syzkaller as if it were a serious issue. Let's drop snd_BUG_ON() for avoiding that. While we're at it, correct the error code to a more suitable, EINVAL. Reported-by: syzbot+23b22dc2e0b81cbfcc95@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200901131802.18157-1-tiwai@suse.deSigned-off-by:
-
Tong Zhang authored
commit ee0761d1 upstream. snd_ca0106_spi_write() returns 1 on error, snd_ca0106_pcm_power_dac() is returning the error code directly, and the caller is expecting an negative error code Signed-off-by:
Tong Zhang <ztong0001@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200824224541.1260307-1-ztong0001@gmail.comSigned-off-by:
-
Rogan Dawes authored
[ Upstream commit 7d605309 ] Signed-off-by:
Rogan Dawes <rogan@dawes.za.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Bjørn Mork authored
[ Upstream commit 60cfe1ea ] A new Sierra Wireless EM7305 device ID used in a Toshiba laptop, and two Longcheer device IDs entries used by Telewell TW-3G HSPA+ branded modems. Reported-by:
Petr Kloc <petr_kloc@yahoo.com> Reported-by:
Teemu Likonen <tlikonen@iki.fi> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Daniele Palmas authored
[ Upstream commit 14cf4a77 ] Telit LE920A4 uses the same pid 0x1201 of LE920, but modem implementation is different, since it requires DTR to be set for answering to qmi messages. This patch replaces QMI_FIXED_INTF with QMI_QUIRK_SET_DTR: tests on LE920 have been performed in order to verify backward compatibility. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Daniele Palmas authored
[ Upstream commit e0ae2c57 ] This patch adds support for Telit FN980 0x1050 composition 0x1050: tty, adb, rmnet, tty, tty, tty, tty Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Josef Bacik authored
[ Upstream commit a48b73ec ] With the conversion of the tree locks to rwsem I got the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00165-g04ec4da5f45f-dirty #922 Not tainted ------------------------------------------------------ compsize/11122 is trying to acquire lock: ffff889fabca8768 (&mm->mmap_lock#2){++++}-{3:3}, at: __might_fault+0x3e/0x90 but task is already holding lock: ffff889fe720fe40 (btrfs-fs-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-fs-00){++++}-{3:3}: down_write_nested+0x3b/0x70 __btrfs_tree_lock+0x24/0x120 btrfs_search_slot+0x756/0x990 btrfs_lookup_inode+0x3a/0xb4 __btrfs_update_delayed_inode+0x93/0x270 btrfs_async_run_delayed_root+0x168/0x230 btrfs_work_helper+0xd4/0x570 process_one_work+0x2ad/0x5f0 worker_thread+0x3a/0x3d0 kthread+0x133/0x150 ret_from_fork+0x1f/0x30 -> #1 (&delayed_node->mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_delayed_update_inode+0x50/0x440 btrfs_update_inode+0x8a/0xf0 btrfs_dirty_inode+0x5b/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&mm->mmap_lock#2){++++}-{3:3}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 copy_to_sk.isra.32+0x121/0x300 search_ioctl+0x106/0x200 btrfs_ioctl_tree_search_v2+0x7b/0xf0 btrfs_ioctl+0x106f/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &mm->mmap_lock#2 --> &delayed_node->mutex --> btrfs-fs-00 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-fs-00); lock(&delayed_node->mutex); lock(btrfs-fs-00); lock(&mm->mmap_lock#2); *** DEADLOCK *** 1 lock held by compsize/11122: #0: ffff889fe720fe40 (btrfs-fs-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 stack backtrace: CPU: 17 PID: 11122 Comm: compsize Kdump: loaded Not tainted 5.8.0-rc7-00165-g04ec4da5f45f-dirty #922 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? __might_fault+0x3e/0x90 ? find_held_lock+0x72/0x90 __might_fault+0x68/0x90 ? __might_fault+0x3e/0x90 _copy_to_user+0x1e/0x80 copy_to_sk.isra.32+0x121/0x300 ? btrfs_search_forward+0x2a6/0x360 search_ioctl+0x106/0x200 btrfs_ioctl_tree_search_v2+0x7b/0xf0 btrfs_ioctl+0x106f/0x30a0 ? __do_sys_newfstat+0x5a/0x70 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The problem is we're doing a copy_to_user() while holding tree locks, which can deadlock if we have to do a page fault for the copy_to_user(). This exists even without my locking changes, so it needs to be fixed. Rework the search ioctl to do the pre-fault and then copy_to_user_nofault for the copying. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 1d1585ca ] Commit 3d708182 ("uaccess: Add non-pagefault user-space read functions") missed to add probe write function, therefore factor out a probe_write_common() helper with most logic of probe_kernel_write() except setting KERNEL_DS, and add a new probe_user_write() helper so it can be used from BPF side. Again, on some archs, the user address space and kernel address space can co-exist and be overlapping, so in such case, setting KERNEL_DS would mean that the given address is treated as being in kernel address space. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Andrii Nakryiko <andriin@fb.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/bpf/9df2542e68141bfa3addde631441ee45503856a8.1572649915.git.daniel@iogearbox.netSigned-off-by:
-
Masami Hiramatsu authored
[ Upstream commit 3d708182 ] Add probe_user_read(), strncpy_from_unsafe_user() and strnlen_unsafe_user() which allows caller to access user-space in IRQ context. Current probe_kernel_read() and strncpy_from_unsafe() are not available for user-space memory, because it sets KERNEL_DS while accessing data. On some arch, user address space and kernel address space can be co-exist, but others can not. In that case, setting KERNEL_DS means given address is treated as a kernel address space. Also strnlen_user() is only available from user context since it can sleep if pagefault is enabled. To access user-space memory without pagefault, we need these new functions which sets USER_DS while accessing the data. Link: http://lkml.kernel.org/r/155789869802.26965.4940338412595759063.stgit@devnote2Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Josef Bacik authored
[ Upstream commit d3beaa25 ] These are special extent buffers that get rewound in order to lookup the state of the tree at a specific point in time. As such they do not go through the normal initialization paths that set their lockdep class, so handle them appropriately when they are created and before they are locked. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Nikolay Borisov authored
[ Upstream commit 24cee18a ] When a rewound buffer is created it already has a ref count of 1 and the dummy flag set. Then another ref is taken bumping the count to 2. Finally when this buffer is released from btrfs_release_path the extra reference is decremented by the special handling code in free_extent_buffer. However, this special code is in fact redundant sinca ref count of 1 is still correct since the buffer is only accessed via btrfs_path struct. This paves the way forward of removing the special handling in free_extent_buffer. Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Nikolay Borisov authored
[ Upstream commit 6c122e2a ] get_old_root used used only by btrfs_search_old_slot to initialise the path structure. The old root is always a cloned buffer (either via alloc dummy or via btrfs_clone_extent_buffer) and its reference count is 2: 1 from allocation, 1 from extent_buffer_get call in get_old_root. This latter explicit ref count acquire operation is in fact unnecessary since the semantic is such that the newly allocated buffer is handed over to the btrfs_path for lifetime management. Considering this just remove the extra extent_buffer_get in get_old_root. Signed-off-by:
-
Josef Bacik authored
commit 9771a5cf upstream. With the conversion of the tree locks to rwsem I got the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00167-g0d7ba0c5b375-dirty #925 Not tainted ------------------------------------------------------ btrfs-uuid/7955 is trying to acquire lock: ffff88bfbafec0f8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 but task is already holding lock: ffff88bfbafef2a8 (btrfs-uuid-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (btrfs-uuid-00){++++}-{3:3}: down_read_nested+0x3e/0x140 __btrfs_tree_read_lock+0x39/0x180 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x4bd/0x990 btrfs_uuid_tree_add+0x89/0x2d0 btrfs_uuid_scan_kthread+0x330/0x390 kthread+0x133/0x150 ret_from_fork+0x1f/0x30 -> #0 (btrfs-root-00){++++}-{3:3}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 down_read_nested+0x3e/0x140 __btrfs_tree_read_lock+0x39/0x180 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x4bd/0x990 btrfs_find_root+0x45/0x1b0 btrfs_read_tree_root+0x61/0x100 btrfs_get_root_ref.part.50+0x143/0x630 btrfs_uuid_tree_iterate+0x207/0x314 btrfs_uuid_rescan_kthread+0x12/0x50 kthread+0x133/0x150 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-uuid-00); lock(btrfs-root-00); lock(btrfs-uuid-00); lock(btrfs-root-00); *** DEADLOCK *** 1 lock held by btrfs-uuid/7955: #0: ffff88bfbafef2a8 (btrfs-uuid-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 stack backtrace: CPU: 73 PID: 7955 Comm: btrfs-uuid Kdump: loaded Not tainted 5.8.0-rc7-00167-g0d7ba0c5b375-dirty #925 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? __btrfs_tree_read_lock+0x39/0x180 ? btrfs_root_node+0x1c/0x1d0 down_read_nested+0x3e/0x140 ? __btrfs_tree_read_lock+0x39/0x180 __btrfs_tree_read_lock+0x39/0x180 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x4bd/0x990 btrfs_find_root+0x45/0x1b0 btrfs_read_tree_root+0x61/0x100 btrfs_get_root_ref.part.50+0x143/0x630 btrfs_uuid_tree_iterate+0x207/0x314 ? btree_readpage+0x20/0x20 btrfs_uuid_rescan_kthread+0x12/0x50 kthread+0x133/0x150 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x1f/0x30 This problem exists because we have two different rescan threads, btrfs_uuid_scan_kthread which creates the uuid tree, and btrfs_uuid_tree_iterate that goes through and updates or deletes any out of date roots. The problem is they both do things in different order. btrfs_uuid_scan_kthread() reads the tree_root, and then inserts entries into the uuid_root. btrfs_uuid_tree_iterate() scans the uuid_root, but then does a btrfs_get_fs_root() which can read from the tree_root. It's actually easy enough to not be holding the path in btrfs_uuid_scan_kthread() when we add a uuid entry, as we already drop it further down and re-start the search when we loop. So simply move the path release before we add our entry to the uuid tree. This also fixes a problem where we're holding a path open after we do btrfs_end_transaction(), which has it's own problems. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Jason Gunthorpe authored
[ Upstream commit 428fc0af ] Otherwise gcc generates warnings if the expression is complicated. Fixes: 312a0c17 ("[PATCH] LOG2: Alter roundup_pow_of_two() so that it can use a ilog2() on a constant") Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/0-v1-8a2697e3c003+41165-log_brackets_jgg@nvidia.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 30d24fab ] We can sometimes get bogus thermal shutdowns on omap4430 at least with droid4 running idle with a battery charger connected: thermal thermal_zone0: critical temperature reached (143 C), shutting down Dumping out the register values shows we can occasionally get a 0x7f value that is outside the TRM listed values in the ADC conversion table. And then we get a normal value when reading again after that. Reading the register multiple times does not seem help avoiding the bogus values as they stay until the next sample is ready. Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we should have values from 13 to 107 listed with a total of 95 values. But looking at the omap4430_adc_to_temp array, the values are off, and the end values are missing. And it seems that the 4430 ADC table is similar to omap3630 rather than omap4460. Let's fix the issue by using values based on the omap3630 table and just ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has the missing values added while the TRM table only shows every second value. Note that sometimes the ADC register values within the valid table can also be way off for about 1 out of 10 values. But it seems that those just show about 25 C too low values rather than too high values. So those do not cause a bogus thermal shutdown. Fixes: 1a31270e ("staging: omap-thermal: add OMAP4 data structures") Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.comSigned-off-by:
-
Lu Baolu authored
[ Upstream commit 6e4e9ec6 ] The VT-d spec requires (10.4.4 Global Command Register, GCMD_REG General Description) that: If multiple control fields in this register need to be modified, software must serialize the modifications through multiple writes to this register. However, in irq_remapping.c, modifications of IRE and CFI are done in one write. We need to do two separate writes with STS checking after each. It also checks the status register before writing command register to avoid unnecessary register write. Fixes: af8d102f ("x86/intel/irq_remapping: Clean up x2apic opt-out security warning mess") Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by:
Kevin Tian <kevin.tian@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Link: https://lore.kernel.org/r/20200828000615.8281-1-baolu.lu@linux.intel.comSigned-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Michael Chan authored
[ Upstream commit 55669934 ] If tg3_reset_task() fails, the device state is left in an inconsistent state with IFF_RUNNING still set but NAPI state not enabled. A subsequent operation, such as ifdown or AER error can cause it to soft lock up when it tries to disable NAPI state. Fix it by bringing down the device to !IFF_RUNNING state when tg3_reset_task() fails. tg3_reset_task() running from workqueue will now call tg3_close() when the reset fails. We need to modify tg3_reset_task_cancel() slightly to avoid tg3_close() calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise cancel_work_sync() will wait forever for tg3_reset_task() to finish. Reported-by:
David Christensen <drc@linux.vnet.ibm.com> Reported-by:
Baptiste Covolato <baptiste@arista.com> Fixes: db219973 ("tg3: Schedule at most one tg3_reset_task run") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Al Viro authored
[ Upstream commit 77f4689d ] epoll_loop_check_proc() can run into a file already committed to destruction; we can't grab a reference on those and don't need to add them to the set for reverse path check anyway. Tested-by:
Marc Zyngier <maz@kernel.org> Fixes: a9ed4a65 ("epoll: Keep a reference on files added to the check list") Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Vasundhara Volam authored
[ Upstream commit df3875ec ] When a PCI error is detected the PCI state could be corrupt, save the PCI state after initialization and restore it after the slot reset. Fixes: 6316ea6d ("bnxt_en: Enable AER support.") Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
[ Upstream commit dbbfa96a ] If firmware goes into unstable state, HWRM_NVM_GET_DIR_INFO firmware command may return zero dir entries. Return error in such case to avoid zero length dma buffer request. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 0661cef6 ] Move the burst len fixup after setting the generic value for it. This finally enables the fixup introduced by commit 137bd110 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width"), which otherwise was overwritten by the generic value. Reported-by:
kernel test robot <lkp@intel.com> Fixes: 137bd110 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200825064617.16193-1-m.szyprowski@samsung.comSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit e2d79cd8 ] When devm_gpiod_get_optional() fails, bus should be freed just like when of_mdiobus_register() fails. Fixes: 1bddd96c ("net: arc_emac: support the phy reset for emac driver") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Yuusuke Ashizuka authored
[ Upstream commit 1838d6c6 ] When this driver is built as a module, I cannot rmmod it after insmoding it. This is because that this driver calls ravb_mdio_init() at the time of probe, and module->refcnt is incremented by alloc_mdio_bitbang() called after that. Therefore, even if ifup is not performed, the driver is in use and rmmod cannot be performed. $ lsmod Module Size Used by ravb 40960 1 $ rmmod ravb rmmod: ERROR: Module ravb is in use Call ravb_mdio_init() at open and free_mdio_bitbang() at close, thereby rmmod is possible in the ifdown state. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
Yuusuke Ashizuka <ashiduka@fujitsu.com> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit 100e3345 ] hns_nic_dev_probe allocates ndev, but not free it on two error handling paths, which may lead to memleak. Fixes: 63434888 ("net: hns: net: hns: enet adds support of acpi") Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 1e105e6a ] Following bug was reported via irc: nft list ruleset set knock_candidates_ipv4 { type ipv4_addr . inet_service size 65535 elements = { 127.0.0.1 . 123, 127.0.0.1 . 123 } } .. udp dport 123 add @knock_candidates_ipv4 { ip saddr . 123 } udp dport 123 add @knock_candidates_ipv4 { ip saddr . udp dport } It should not have been possible to add a duplicate set entry. After some debugging it turned out that the problem is the immediate value (123) in the second-to-last rule. Concatenations use 32bit registers, i.e. the elements are 8 bytes each, not 6 and it turns out the kernel inserted inet firewall @knock_candidates_ipv4 element 0100007f ffff7b00 : 0 [end] element 0100007f 00007b00 : 0 [end] Note the non-zero upper bits of the first element. It turns out that nft_immediate doesn't zero the destination register, but this is needed when the length isn't a multiple of 4. Furthermore, the zeroing in nft_payload is broken. We can't use [len / 4] = 0 -- if len is a multiple of 4, index is off by one. Skip zeroing in this case and use a conditional instead of (len -1) / 4. Fixes: 49499c3e ("netfilter: nf_tables: switch registers to 32 bit addressing") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit da9125df ] This should be NFTA_LIST_UNSPEC instead of NFTA_LIST_UNPEC, all other similar attribute definitions are postfixed with _UNSPEC. Fixes: 96518518 ("netfilter: add nftables") Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 6f03bf43 ] Kernel sends an empty NFTA_SET_USERDATA attribute with no value if userspace adds a set with no NFTA_SET_USERDATA attribute. Fixes: e6d8ecac ("netfilter: nf_tables: Add new attributes into nft_set to store user data.") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit e14f633b ] The initialization done by bmips_cpu_setup() typically affects both threads of a given core, on 7435 which supports 2 cores and 2 threads, logical CPU number 2 and 3 would not run this initialization. Fixes: 738a3f79 ("MIPS: BMIPS: Add early CPU initialization code") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit dbfc95f9 ] When the BMIPS generic cpu-feature-overrides.h file was introduced, cpu_has_inclusive_caches/MIPS_CPU_INCLUSIVE_CACHES was not set for BMIPS5000 CPUs. Correct this when we have initialized the MIPS secondary cache successfully. Fixes: f337967d ("MIPS: BMIPS: Add cpu-feature-overrides.h") Signed-off-by:
-
Yu Kuai authored
[ Upstream commit 0cef8e2c ] The reurn value of of_find_device_by_node() is not checked, thus null pointer dereference will be triggered if of_find_device_by_node() failed. Fixes: bbe89c8e ("at_hdmac: move to generic DMA binding") Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20200817115728.1706719-2-yukuai3@huawei.comSigned-off-by:
-
Jussi Kivilinna authored
[ Upstream commit 279e89b2 ] batadv_bla_send_claim() gets called from worker thread context through batadv_bla_periodic_work(), thus netif_rx_ni needs to be used in that case. This fixes "NOHZ: local_softirq_pending 08" log messages seen when batman-adv is enabled. Fixes: 23721387 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@haltian.com> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 303216e7 ] The gateway client code can try to optimize the delivery of DHCP packets to avoid broadcasting them through the whole mesh. But also transmissions to the client can be optimized by looking up the destination via the chaddr of the DHCP packet. But the chaddr is currently only done when chaddr is fully inside the non-paged area of the skbuff. Otherwise it will not be initialized and the unoptimized path should have been taken. But the implementation didn't handle this correctly. It didn't retrieve the correct chaddr but still tried to perform the TT lookup with this uninitialized memory. Reported-by: syzbot+ab16e463b903f5a37036@syzkaller.appspotmail.com Fixes: 6c413b1c ("batman-adv: send every DHCP packet as bat-unicast") Signed-off-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 5b2aa9f9 ] of_dma_xlate callback can return ERR_PTR as well NULL in case of failure. If error code is returned (not NULL) then the route should be released and the router should not be registered for the channel. Fixes: 56f13c0d ("dmaengine: of_dma: Support for DMA routers") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200806104928.25975-1-peter.ujfalusi@ti.comSigned-off-by:
-
Simon Leiner authored
[ Upstream commit d742db70 ] On some architectures (like ARM), virt_to_gfn cannot be used for vmalloc'd memory because of its reliance on virt_to_phys. This patch introduces a check for vmalloc'd addresses and obtains the PFN using vmalloc_to_pfn in that case. Signed-off-by:
Simon Leiner <simon@leiner.me> Reviewed-by:
Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20200825093153.35500-1-simon@leiner.meSigned-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Sven Schnelle authored
[ Upstream commit 1196f12a ] Since commit a21ee605 ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables") the lockdep code itself uses percpu variables. This leads to recursions because the percpu macros are calling preempt_enable() which might call trace_preempt_on(). Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Reviewed-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Jeff Layton authored
[ Upstream commit 496ceaf1 ] Leases don't currently work correctly on kcephfs, as they are not broken when caps are revoked. They could eventually be implemented similarly to how we did them in libcephfs, but for now don't allow them. [ idryomov: no need for simple_nosetlease() in ceph_dir_fops and ceph_snapdir_fops ] Signed-off-by:
Jeff Layton <jlayton@kernel.org> Reviewed-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Amit Engel authored
[ Upstream commit 0d3b6a8d ] Based on nvme spec, when keep alive timeout is set to zero the keep-alive timer should be disabled. Signed-off-by:
Amit Engel <amit.engel@dell.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Tom Rix authored
[ Upstream commit cecf7560 ] clang static analysis reports this representative problem applesmc.c:758:10: warning: 1st function call argument is an uninitialized value left = be16_to_cpu(*(__be16 *)(buffer + 6)) >> 2; ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ buffer is filled by the earlier call ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, ... This problem is reported because a goto skips the status check. Other similar problems use data from applesmc_read_key before checking the status. So move the checks to before the use. Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Henrik Rydberg <rydberg@bitmath.org> Link: https://lore.kernel.org/r/20200820131932.10590-1-trix@redhat.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Kim Phillips authored
commit e48a73a3 upstream. Event modifiers are not mentioned in the perf record or perf stat manpages. Add them to orient new users more effectively by pointing them to the perf list manpage for details. Fixes: 2055fdaf ("perf list: Document precise event sampling for AMD IBS") Signed-off-by:
Kim Phillips <kim.phillips@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tony Jones <tonyj@suse.de> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
