Pull dma-mapping updates from Christoph Hellwig:

 - a series from Robin to fix bus imposed dma limits by adding a
   separate mask for them to struct device instead of trying to squeeze
   a second meaning out of the existing dma mask as we did before.

   This has ACKs from the various other subsystems touched

 - a small swiotlb cleanup from Kees (acked by Konrad)

 - conversion of nios2 and sh to the new generic dma-noncoherent code.

   Various other architecture conversions will come through the
   architectures maintainers trees.

* tag 'dma-mapping-4.19' of git://git.infradead.org/users/hch/dma-mapping:
  sh: use generic dma_noncoherent_ops
  sh: split arch/sh/mm/consistent.c
  sh: use dma_direct_ops for the CONFIG_DMA_COHERENT case
  sh: introduce a sh_cacheop_vaddr helper
  sh: simplify get_arch_dma_ops
  OF: Don't set default coherent DMA mask
  ACPI/IORT: Don't set default coherent DMA mask
  iommu/dma: Respect bus DMA limit for IOVAs
  of/device: Set bus DMA mask as appropriate
  ACPI/IORT: Set bus DMA mask as appropriate
  dma-mapping: Generalise dma_32bit_limit flag
  ACPI/IORT: Support address size limit for root complexes
  of/platform: Initialise default DMA masks
  nios2: use generic dma_noncoherent_ops
  swiotlb: clean up reporting
  dma-mapping: relax warning for per-device areas

Pull MD updates from Shaohua Li:
 "A few MD fixes for 4.19-rc1:

   - several md-cluster fixes from Guoqing

   - a data corruption fix from BingJing

   - other cleanups"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md/raid5: fix data corruption of replacements after originals dropped
  drivers/md/raid5: Do not disable irq on release_inactive_stripe_list() call
  drivers/md/raid5: Use irqsave variant of atomic_dec_and_lock()
  md/r5cache: remove redundant pointer bio
  md-cluster: don't send msg if array is closing
  md-cluster: show array's status more accurate
  md-cluster: clear another node's suspend_area after the copy is finished

Pull mtd updates from Boris Brezillon:
 "JFFS2 changes:
   - Support 64-bit timestamps

  MTD core changes:
   - Support sub-partitions
   - Clarify mtd_oob_ops documentation
   - Make Kconfig formatting consistent
   - Fix potential overflows in mtdchar_{write,read}()
   - Fallback to ->_{read,write}() when ->_{read,write}_oob() is missing
     and no OOB data were requested
   - Remove VLA usage in the bch lib

  MTD driver changes:
   - Use mtd_device_register() instead of mtd_device_parse_register()
     where applicable
   - Use proper printk format to print physical addresses in the
     solutionengine driver
   - Add missing mtd_set_of_node() call in the powernv driver
   - Remove unneeded variables in a few drivers
   - Plug the TRX part parser to the DT partition parsers logic
   - Check ioremap_cache() return code in the gpio-addr-flash driver
   - Stop using VMLINUX_SYMBOL_STR() in gen_probe.c

  SPI NOR core changes:
   - Apply reset hacks only when reset is explicitly marked as broken in
     the DT

   SPI NOR driver changes:
   - Minor cleanup/fixes in the m25p80 driver
   - Release flash_np in the nxp-spifi driver
   - Add suspend/resume hooks to the atmel-quadspi driver
   - Include gpio/consumer.h instead of gpio.h in the atmel-quadspi
     driver
   - Use %pK instead of %p in the stm32-quadspi driver
   - Improve timeout handling in the cadence-quadspi driver
   - Use mtd_device_register() instead of mtd_device_parse_register() in
     the intel-spi driver

  NAND core changes:
   - Add the SPI-NAND framework.
   - Create a helper to find the best ECC configuration.
   - Create NAND controller operations.
   - Allocate dynamically ONFI parameters structure.
   - Add defines for ONFI version bits.
   - Add manufacturer fixup for ONFI parameter page.
   - Add an option to specify NAND chip as a boot device.
   - Add Reed-Solomon error correction algorithm.
   - Better name for the controller structure.
   - Remove unused caller_is_module() definition.
   - Make subop helpers return unsigned values.
   - Expose _notsupp() helpers for raw page accessors.
   - Add default values for dynamic timings.
   - Kill the chip->scan_bbt() hook.
   - Rename nand_default_bbt() into nand_create_bbt().
   - Start to clean the nand_chip structure.
   - Remove stale prototype from rawnand.h.

  Raw NAND controllers drivers changes:
   - Qcom: structuring cleanup.
   - Denali: use core helper to find the best ECC configuration.
   - Possible build of almost all drivers by adding a dependency on
     COMPILE_TEST for almost all of them in Kconfig, implies various
     fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even
     changes in sparc64 and ia64 architectures.
   - Clean the ->probe() functions error path of a lot of drivers.
   - Migrate all drivers to use nand_scan() instead of
     nand_scan_ident()/nand_scan_tail() pair.
   - Use mtd_device_register() where applicable to simplify the code.
   - Marvell:
      * Handle on-die ECC.
      * Better clocks handling.
      * Remove bogus comment.
      * Add suspend and resume support.
   - Tegra: add NAND controller driver.
   - Atmel:
      * Add module param to avoid using dma.
      * Drop Wenyou Yang from MAINTAINERS.
   - Denali: optimize timings handling.
   - FSMC: Stop using chip->read_buf().
   - FSL:
      * Switch to SPDX license tag identifiers.
      * Fix qualifiers in MXC init functions.

  Raw NAND chip drivers changes:
   - Micron:
      * Add fixup for ONFI revision.
      * Update ecc_stats.corrected.
      * Make ECC activation stateful.
      * Avoid enabling/disabling ECC when it can't be disabled.
      * Get the actual number of bitflips.
      * Allow forced on-die ECC.
      * Support 8/512 on-die ECC.
      * Fix on-die ECC detection logic.
   - Hynix:
      * Fix decoding the OOB size on H27UCG8T2BTR.
      * Use ->exec_op() in hynix_nand_reg_write_op()"

* tag 'mtd/for-4.19' of git://git.infradead.org/linux-mtd: (188 commits)
  mtd: rawnand: atmel: Select GENERIC_ALLOCATOR
  MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support
  mtd: rawnand: allocate dynamically ONFI parameters during detection
  mtd: spi-nor: only apply reset hacks to broken hardware
  mtd: spi-nor: cadence-quadspi: fix timeout handling
  mtd: spi-nor: atmel-quadspi: Include gpio/consumer.h instead of gpio.h
  mtd: spi-nor: intel-spi: use mtd_device_register()
  mtd: spi-nor: stm32-quadspi: replace "%p" with "%pK"
  mtd: spi-nor: atmel-quadspi: add suspend/resume hooks
  mtd: rawnand: allocate model parameter dynamically
  mtd: rawnand: do not export nand_scan_[ident|tail]() anymore
  mtd: rawnand: txx9ndfmc: convert driver to nand_scan()
  mtd: rawnand: txx9ndfmc: clarify ECC parameters assignation
  mtd: rawnand: tegra: convert driver to nand_scan()
  mtd: rawnand: jz4740: convert driver to nand_scan()
  mtd: rawnand: jz4740: group nand_scan_{ident, tail} calls
  mtd: rawnand: jz4740: fix probe function error path
  mtd: rawnand: docg4: convert driver to nand_scan()
  mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero
  mtd: rawnand: atmel: convert driver to nand_scan()
  ...

Nobody commented on this patch back in July. So now it gets merged.

* SCSI_IOCTL_SEND_COMMAND cleanup:
  scsi sg: remove incorrect scsi command checking logic

Pull block updates from Jens Axboe:
 "First pull request for this merge window, there will also be a
  followup request with some stragglers.

  This pull request contains:

   - Fix for a thundering heard issue in the wbt block code (Anchal
     Agarwal)

   - A few NVMe pull requests:
      * Improved tracepoints (Keith)
      * Larger inline data support for RDMA (Steve Wise)
      * RDMA setup/teardown fixes (Sagi)
      * Effects log suppor for NVMe target (Chaitanya Kulkarni)
      * Buffered IO suppor for NVMe target (Chaitanya Kulkarni)
      * TP4004 (ANA) support (Christoph)
      * Various NVMe fixes

   - Block io-latency controller support. Much needed support for
     properly containing block devices. (Josef)

   - Series improving how we handle sense information on the stack
     (Kees)

   - Lightnvm fixes and updates/improvements (Mathias/Javier et al)

   - Zoned device support for null_blk (Matias)

   - AIX partition fixes (Mauricio Faria de Oliveira)

   - DIF checksum code made generic (Max Gurtovoy)

   - Add support for discard in iostats (Michael Callahan / Tejun)

   - Set of updates for BFQ (Paolo)

   - Removal of async write support for bsg (Christoph)

   - Bio page dirtying and clone fixups (Christoph)

   - Set of bcache fix/changes (via Coly)

   - Series improving blk-mq queue setup/teardown speed (Ming)

   - Series improving merging performance on blk-mq (Ming)

   - Lots of other fixes and cleanups from a slew of folks"

* tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits)
  blkcg: Make blkg_root_lookup() work for queues in bypass mode
  bcache: fix error setting writeback_rate through sysfs interface
  null_blk: add lock drop/acquire annotation
  Blk-throttle: reduce tail io latency when iops limit is enforced
  block: paride: pd: mark expected switch fall-throughs
  block: Ensure that a request queue is dissociated from the cgroup controller
  block: Introduce blk_exit_queue()
  blkcg: Introduce blkg_root_lookup()
  block: Remove two superfluous #include directives
  blk-mq: count the hctx as active before allocating tag
  block: bvec_nr_vecs() returns value for wrong slab
  bcache: trivial - remove tailing backslash in macro BTREE_FLAG
  bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section
  bcache: set max writeback rate when I/O request is idle
  bcache: add code comments for bset.c
  bcache: fix mistaken comments in request.c
  bcache: fix mistaken code comments in bcache.h
  bcache: add a comment in super.c
  bcache: avoid unncessary cache prefetch bch_btree_node_get()
  bcache: display rate debug parameters to 0 when writeback is not running
  ...

Merge L1 Terminal Fault fixes from Thomas Gleixner:
 "L1TF, aka L1 Terminal Fault, is yet another speculative hardware
  engineering trainwreck. It's a hardware vulnerability which allows
  unprivileged speculative access to data which is available in the
  Level 1 Data Cache when the page table entry controlling the virtual
  address, which is used for the access, has the Present bit cleared or
  other reserved bits set.

  If an instruction accesses a virtual address for which the relevant
  page table entry (PTE) has the Present bit cleared or other reserved
  bits set, then speculative execution ignores the invalid PTE and loads
  the referenced data if it is present in the Level 1 Data Cache, as if
  the page referenced by the address bits in the PTE was still present
  and accessible.

  While this is a purely speculative mechanism and the instruction will
  raise a page fault when it is retired eventually, the pure act of
  loading the data and making it available to other speculative
  instructions opens up the opportunity for side channel attacks to
  unprivileged malicious code, similar to the Meltdown attack.

  While Meltdown breaks the user space to kernel space protection, L1TF
  allows to attack any physical memory address in the system and the
  attack works across all protection domains. It allows an attack of SGX
  and also works from inside virtual machines because the speculation
  bypasses the extended page table (EPT) protection mechanism.

  The assoicated CVEs are: CVE-2018-3615, CVE-2018-3620, CVE-2018-3646

  The mitigations provided by this pull request include:

   - Host side protection by inverting the upper address bits of a non
     present page table entry so the entry points to uncacheable memory.

   - Hypervisor protection by flushing L1 Data Cache on VMENTER.

   - SMT (HyperThreading) control knobs, which allow to 'turn off' SMT
     by offlining the sibling CPU threads. The knobs are available on
     the kernel command line and at runtime via sysfs

   - Control knobs for the hypervisor mitigation, related to L1D flush
     and SMT control. The knobs are available on the kernel command line
     and at runtime via sysfs

   - Extensive documentation about L1TF including various degrees of
     mitigations.

  Thanks to all people who have contributed to this in various ways -
  patches, review, testing, backporting - and the fruitful, sometimes
  heated, but at the end constructive discussions.

  There is work in progress to provide other forms of mitigations, which
  might be less horrible performance wise for a particular kind of
  workloads, but this is not yet ready for consumption due to their
  complexity and limitations"

* 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
  x86/microcode: Allow late microcode loading with SMT disabled
  tools headers: Synchronise x86 cpufeatures.h for L1TF additions
  x86/mm/kmmio: Make the tracer robust against L1TF
  x86/mm/pat: Make set_memory_np() L1TF safe
  x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert
  x86/speculation/l1tf: Invert all not present mappings
  cpu/hotplug: Fix SMT supported evaluation
  KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry
  x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry
  x86/speculation: Simplify sysfs report of VMX L1TF vulnerability
  Documentation/l1tf: Remove Yonah processors from not vulnerable list
  x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr()
  x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d
  x86: Don't include linux/irq.h from asm/hardirq.h
  x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d
  x86/irq: Demote irq_cpustat_t::__softirq_pending to u16
  x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush()
  x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond'
  x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush()
  cpu/hotplug: detect SMT disabled by BIOS
  ...

Pull xfs updates from Darrick Wong:
 "This is the second part of the XFS changes for 4.19.

  The biggest changes are the removal of buffer heads frm XFS, a massive
  reworking of the deferred transaction operations handling code, the
  removal of the long defunct barrier/nobarrier mount options, and the
  addition of a few more online repair functions.

  Summary:

   - Use extent maps to track pagecache page status instead of
     bufferhead state.

   - Refactor pagecache read and write paths to use the new iomap
     library functions, which enable us to drop the old bufferhead code
     for pagesize == blocksize filesystems.

   - Set up parallel per-block-per-page metadata to track subpage
     information that was tracked by buffer heads, which enables us to
     drop the old bufferhead code for pagesize > blocksize filesystems.

   - Tie a deferred ops control structure to a transaction so that we
     can take advantage of an upper-level dfops without having to plumb
     pointer passing through the code.

   - Refactor the deferred ops code to track deferred ops as part of the
     transaction structure (instead of as a separate data structure) so
     that we can simplify the scoping rules around defer_ops.

   - Refactor twisty delwri buffer submission code to avoid deadlocks.

   - Shorten and fix indenting problems in the scrub code.

   - Detect obviously bad summary counts at mount and fix them.

   - Directly associate deferred ops control structure with a
     transaction so that callers no longer have to manage it themselves.

   - Remove a couple of IRIX-era inode macros.

   - Remove the long-deprecated 'barrier' and 'nobarrier' mount options.

   - Clean up the inode fork structure a bit.

   - Check for bad fs summary counter values in the superblock.

   - Reduce COW fork lookups during writeback.

   - Refactor the deferred ops control structures into the transaction
     structure, thereby eliminating the need for transaction users to
     handle the deferred ops as a separate data structure.

   - Add the ability to repair AG headers online.

   - Fix a crash due to insufficient return value checking.

   - Various fixes and cleanups"

* tag 'xfs-4.19-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (155 commits)
  xfs: fix a null pointer dereference in xfs_bmap_extents_to_btree
  xfs: remove b_last_holder & associated macros
  iomap: Switch to offset_in_page for clarity
  xfs: Close race between direct IO and xfs_break_layouts()
  xfs: repair the AGI
  xfs: repair the AGFL
  xfs: repair the AGF
  xfs: remove dead error handling code in xfs_dquot_disk_alloc()
  xfs: use WRITE_ONCE to update if_seq
  xfs: fix a comment in xfs_log_reserve
  xfs: only validate summary counts on primary superblock
  xfs: substitute spaces with tabs
  xfs: fold dfops into the transaction
  xfs: always defer agfl block frees
  xfs: pass transaction to xfs_defer_add()
  xfs: replace xfs_defer_ops ->dop_pending with on-stack list
  xfs: cancel dfops on xfs_defer_finish() error
  xfs: clean out superfluous dfops dop params/vars
  xfs: drop dop param from xfs_defer_op_type ->finish_item() callback
  xfs: automatic dfops inode relogging
  ...

Pull ext4 updates from Ted Ts'o:

 - Convert content from the ext4 wiki to Documentation rst files so it
   is more likely to be updated as we add new features to ext4.

 - Add 64-bit timestamp support to ext4's superblock fields.

 - ... and the usual bug fixes and cleanups, including a Spectre gadget
   fixup and some hardening against maliciously corrupted file systems.

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (34 commits)
  ext4: remove unneeded variable "err" in ext4_mb_release_inode_pa()
  ext4: improve code readability in ext4_iget()
  ext4: fix spectre gadget in ext4_mb_regular_allocator()
  ext4: check for NUL characters in extended attribute's name
  ext4: use ext4_warning() for sb_getblk failure
  ext4: fix race when setting the bitmap corrupted flag
  ext4: reset error code in ext4_find_entry in fallback
  ext4: handle layout changes to pinned DAX mappings
  dax: dax_layout_busy_page() warn on !exceptional
  docs: fix up the obviously obsolete bits in the new ext4 documentation
  docs: add new ext4 superblock time extension fields
  docs: create filesystem internal section
  ext4: use swap macro in mext_page_double_lock
  ext4: check allocation failure when duplicating "data" in ext4_remount()
  ext4: fix warning message in ext4_enable_quotas()
  ext4: super: extend timestamps to 40 bits
  jbd2: replace current_kernel_time64 with ktime equivalent
  ext4: use timespec64 for all inode times
  ext4: use ktime_get_real_seconds for i_dtime
  ext4: use 64-bit timestamps for mmp_time
  ...

Pull cifs updates from Steve French:
 "smb3/cifs fixes (including 8 for stable).

  Other improvements include:

   - improved tracing, improved stats

   - snapshots (previous version mounts work now over SMB3)

   - performance (compounding enabled for statfs, ~40% faster).

   - security (make it possible to build cifs.ko with insecure vers=1.0
     disabled in Kconfig)"

* tag '4.19-smb3' of git://git.samba.org/sfrench/cifs-2.6: (43 commits)
  smb3: create smb3 equivalent alias for cifs pseudo-xattrs
  smb3: allow previous versions to be mounted with snapshot= mount parm
  cifs: don't show domain= in mount output when domain is empty
  cifs: add missing support for ACLs in SMB 3.11
  smb3: enumerating snapshots was leaving part of the data off end
  cifs: update smb2_queryfs() to use compounding
  cifs: update receive_encrypted_standard to handle compounded responses
  cifs: create SMB2_open_init()/SMB2_open_free() helpers.
  cifs: add SMB2_query_info_[init|free]()
  cifs: add SMB2_close_init()/SMB2_close_free()
  smb3: display stats counters for number of slow commands
  CIFS: fix uninitialized ptr deref in smb2 signing
  smb3: Do not send SMB3 SET_INFO if nothing changed
  smb3: fix minor debug output for CONFIG_CIFS_STATS
  smb3: add tracepoint for slow responses
  cifs: add compound_send_recv()
  cifs: make smb_send_rqst take an array of requests
  cifs: update init_sg, crypt_message to take an array of rqst
  smb3: update readme to correct information about /proc/fs/cifs/Stats
  smb3: fix reset of bytes read and written stats
  ...

Pull fs iomap refactoring from Darrick Wong:
 "This is the first part of the XFS changes for 4.19.

  Christoph and Andreas coordinated some refactoring work on the iomap
  code in preparation for removing buffer heads from XFS and porting
  gfs2 to iomap. I'm sending this small pull request ahead of the main
  XFS merge to avoid holding up gfs2 unnecessarily"

* 'iomap-4.19-merge' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: add inline data support to iomap_readpage_actor
  iomap: support direct I/O to inline data
  iomap: refactor iomap_dio_actor
  iomap: add initial support for writes without buffer heads
  iomap: add an iomap-based readpage and readpages implementation
  iomap: add private pointer to struct iomap
  iomap: add a page_done callback
  iomap: generic inline data handling
  iomap: complete partial direct I/O writes synchronously
  iomap: mark newly allocated buffer heads as new
  fs: factor out a __generic_write_end helper

Pull btrfs updates from David Sterba:
 "Mostly fixes and cleanups, nothing big, though the notable thing is
  the inserted/deleted lines delta -1124.

  User visible changes:
   - allow defrag on opened read-only files that have rw permissions;
     similar to what dedupe will allow on such files

  Core changes:
   - tree checker improvements, reported by fuzzing:
      * more checks for: block group items, essential trees
      * chunk type validation
      * mount time cross-checks that physical and logical chunks match
      * switch more error codes to EUCLEAN aka EFSCORRUPTED

  Fixes:
   - fsync corner case fixes

   - fix send failure when root has deleted files still open

   - send, fix incorrect file layout after hole punching beyond eof

   - fix races between mount and deice scan ioctl, found by fuzzing

   - fix deadlock when delayed iput is called from writeback on the same
     inode; rare but has been observed in practice, also removes code

   - fix pinned byte accounting, using the right percpu helpers; this
     should avoid some write IO inefficiency during low space conditions

   - don't remove block group that still has pinned bytes

   - reset on-disk device stats value after replace, otherwise this
     would report stale values for the new device

  Cleanups:
   - time64_t/timespec64 cleanups

   - remove remaining dead code in scrub handling NOCOW extents after
     disabling it in previous cycle

   - simplify fsync regarding ordered extents logic and remove all the
     related code

   - remove redundant arguments in order to reduce stack space
     consumption

   - remove support for V0 type of extents, not in use since 2.6.30

   - remove several unused structure members

   - fewer indirect function calls by inlining some callbacks

   - qgroup rescan timing fixes

   - vfs: iget cleanups"

* tag 'for-4.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (182 commits)
  btrfs: revert fs_devices state on error of btrfs_init_new_device
  btrfs: Exit gracefully when chunk map cannot be inserted to the tree
  btrfs: Introduce mount time chunk <-> dev extent mapping check
  btrfs: Verify that every chunk has corresponding block group at mount time
  btrfs: Check that each block group has corresponding chunk at mount time
  Btrfs: send, fix incorrect file layout after hole punching beyond eof
  btrfs: Use wrapper macro for rcu string to remove duplicate code
  btrfs: simplify btrfs_iget
  btrfs: lift make_bad_inode into btrfs_iget
  btrfs: simplify IS_ERR/PTR_ERR checks
  btrfs: btrfs_iget never returns an is_bad_inode inode
  btrfs: replace: Reset on-disk dev stats value after replace
  btrfs: extent-tree: Remove unused __btrfs_free_block_rsv
  btrfs: backref: Use ERR_CAST to return error code
  btrfs: Remove redundant btrfs_release_path from btrfs_unlink_subvol
  btrfs: Remove root parameter from btrfs_unlink_subvol
  btrfs: Remove fs_info from btrfs_add_root_ref
  btrfs: Remove fs_info from btrfs_del_root_ref
  btrfs: Remove fs_info from btrfs_del_root
  btrfs: Remove fs_info from btrfs_delete_delayed_dir_index
  ...

Pull file locking updates from Jeff Layton:
 "Just a couple of patches from Konstantin to fix /proc/locks when the
  process that set the lock has exited, and a new tracepoint for the
  flock() codepath. Also threw in mailmap entries for my addresses and a
  comment cleanup"

* tag 'locks-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  locks: remove misleading obsolete comment
  mailmap: remap some of my email addresses to kernel.org address
  locks: add tracepoint in flock codepath
  fs/lock: show locks taken by processes from another pidns
  fs/lock: skip lock owner pid translation in case we are in init_pid_ns

Merge branches 'work.misc' and 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull misc vfs updates from Al Viro:
 "Misc cleanups from various folks all over the place

  I expected more fs/dcache.c cleanups this cycle, so that went into a
  separate branch. Said cleanups have missed the window, so in the
  hindsight it could've gone into work.misc instead. Decided not to
  cherry-pick, thus the 'work.dcache' branch"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: dcache: Use true and false for boolean values
  fold generic_readlink() into its only caller
  fs: shave 8 bytes off of struct inode
  fs: Add more kernel-doc to the produced documentation
  fs: Fix attr.c kernel-doc
  removed extra extern file_fdatawait_range

* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  kill dentry_update_name_case()

Pull vfs aio updates from Al Viro:
 "Christoph's aio poll, saner this time around.

  This time it's pretty much local to fs/aio.c. Hopefully race-free..."

* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  aio: allow direct aio poll comletions for keyed wakeups
  aio: implement IOCB_CMD_POLL
  aio: add a iocb refcount
  timerfd: add support for keyed wakeups

Pull vfs lookup() updates from Al Viro:
 "More conversions of ->lookup() to d_splice_alias().

  Should be reasonably complete now - the only leftovers are in ceph"

* 'work.lookup' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  afs_try_auto_mntpt(): return NULL instead of ERR_PTR(-ENOENT)
  afs_lookup(): switch to d_splice_alias()
  afs: switch dynroot lookups to d_splice_alias()
  hpfs: fix an inode leak in lookup, switch to d_splice_alias()
  hostfs_lookup: switch to d_splice_alias()

Pull vfs icache updates from Al Viro:

 - NFS mkdir/open_by_handle race fix

 - analogous solution for FUSE, replacing the one currently in mainline

 - new primitive to be used when discarding halfway set up inodes on
   failed object creation; gives sane warranties re icache lookups not
   returning such doomed by still not freed inodes. A bunch of
   filesystems switched to that animal.

 - Miklos' fix for last cycle regression in iget5_locked(); -stable will
   need a slightly different variant, unfortunately.

 - misc bits and pieces around things icache-related (in adfs and jfs).

* 'work.mkdir' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  jfs: don't bother with make_bad_inode() in ialloc()
  adfs: don't put inodes into icache
  new helper: inode_fake_hash()
  vfs: don't evict uninitialized inode
  jfs: switch to discard_new_inode()
  ext2: make sure that partially set up inodes won't be returned by ext2_iget()
  udf: switch to discard_new_inode()
  ufs: switch to discard_new_inode()
  btrfs: switch to discard_new_inode()
  new primitive: discard_new_inode()
  kill d_instantiate_no_diralias()
  nfs_instantiate(): prevent multiple aliases for directory inode

Pull vfs open-related updates from Al Viro:

 - "do we need fput() or put_filp()" rules are gone - it's always fput()
   now. We keep track of that state where it belongs - in ->f_mode.

 - int *opened mess killed - in finish_open(), in ->atomic_open()
   instances and in fs/namei.c code around do_last()/lookup_open()/atomic_open().

 - alloc_file() wrappers with saner calling conventions are introduced
   (alloc_file_clone() and alloc_file_pseudo()); callers converted, with
   much simplification.

 - while we are at it, saner calling conventions for path_init() and
   link_path_walk(), simplifying things inside fs/namei.c (both on
   open-related paths and elsewhere).

* 'work.open3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
  few more cleanups of link_path_walk() callers
  allow link_path_walk() to take ERR_PTR()
  make path_init() unconditionally paired with terminate_walk()
  document alloc_file() changes
  make alloc_file() static
  do_shmat(): grab shp->shm_file earlier, switch to alloc_file_clone()
  new helper: alloc_file_clone()
  create_pipe_files(): switch the first allocation to alloc_file_pseudo()
  anon_inode_getfile(): switch to alloc_file_pseudo()
  hugetlb_file_setup(): switch to alloc_file_pseudo()
  ocxlflash_getfile(): switch to alloc_file_pseudo()
  cxl_getfile(): switch to alloc_file_pseudo()
  ... and switch shmem_file_setup() to alloc_file_pseudo()
  __shmem_file_setup(): reorder allocations
  new wrapper: alloc_file_pseudo()
  kill FILE_{CREATED,OPENED}
  switch atomic_open() and lookup_open() to returning 0 in all success cases
  document ->atomic_open() changes
  ->atomic_open(): return 0 in all success cases
  get rid of 'opened' in path_openat() and the helpers downstream
  ...

Merge tag 'hwmon-for-linus-v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - new driver for NPCM7xx PWM and Fan controller

 - new driver for Mellanox FAN controller

 - add support for MAX34451 to max34440 driver

 - add support for new Threadripper variants to k10temp driver

 - add error handling to adt7475 driver

 - cleanup nct6775 and nct7904 drivers

 - document sensor enable ABI attributes

* tag 'hwmon-for-linus-v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (adt7475) Change show functions to return error data correctly
  hwmon: (adt7475) Change update functions to add error handling
  hwmon: (adt7475) Change valid parameter to bool type
  hwmon: (adt7475) Split device update function to measure and limits
  hwmon: k10temp: Support Threadripper 2920X, 2970WX; simplify offset table
  hwmon: (k10temp) 27C Offset needed for Threadripper2
  hwmon: (iio_hwmon) Use devm functions
  hwmon: Add NPCM7xx PWM and Fan driver
  dt-binding: hwmon: Add NPCM7xx PWM and Fan controller documentation
  hwmon: (pmbus/max34440) Add support for MAX34451.
  hwmon: Document the sensor enable attribute
  hwmon: (mlxreg-fan) Add support for Mellanox FAN driver
  hwmon: Mark expected switch fall-throughs
  hwmon: (nct6775) Fix comment in the description of pwm_mode
  hwmon: (nct7904) Fix UNSPECIFIED_INT warning
  hwmon: (nct7904) Fix CODE_INDENT error
  hwmon: (nct7904) Fix SPACING errors

Pull MIPS updates from Paul Burton:
 "Here are the main MIPS changes for 4.19.

  An overview of the general architecture changes:

   - Massive DMA ops refactoring from Christoph Hellwig (huzzah for
     deleting crufty code!).

   - We introduce NT_MIPS_DSP & NT_MIPS_FP_MODE ELF notes &
     corresponding regsets to expose DSP ASE & floating point mode state
     respectively, both for live debugging & core dumps.

   - We better optimize our code by hard-coding cpu_has_* macros at
     compile time where their values are known due to the ISA revision
     that the kernel build is targeting.

   - The EJTAG exception handler now better handles SMP systems, where
     it was previously possible for CPUs to clobber a register value
     saved by another CPU.

   - Our implementation of memset() gained a couple of fixes for MIPSr6
     systems to return correct values in some cases where stores fault.

   - We now implement ioremap_wc() using the uncached-accelerated cache
     coherency attribute where supported, which is detected during boot,
     and fall back to plain uncached access where necessary. The
     MIPS-specific (and unused in tree) ioremap_uncached_accelerated() &
     ioremap_cacheable_cow() are removed.

   - The prctl(PR_SET_FP_MODE, ...) syscall is better supported for SMP
     systems by reworking the way we ensure remote CPUs that may be
     running threads within the affected process switch mode.

   - Systems using the MIPS Coherence Manager will now set the
     MIPS_IC_SNOOPS_REMOTE flag to avoid some unnecessary cache
     maintenance overhead when flushing the icache.

   - A few fixes were made for building with clang/LLVM, which now
     sucessfully builds kernels for many of our platforms.

   - Miscellaneous cleanups all over.

  And some platform-specific changes:

   - ar7 gained stubs for a few clock API functions to fix build
     failures for some drivers.

   - ath79 gained support for a few new SoCs, a few fixes & better
     gpio-keys support.

   - Ci20 now exposes its SPI bus using the spi-gpio driver.

   - The generic platform can now auto-detect a suitable value for
     PHYS_OFFSET based upon the memory map described by the device tree,
     allowing us to avoid wasting memory on page book-keeping for
     systems where RAM starts at a non-zero physical address.

   - Ingenic systems using the jz4740 platform code now link their
     vmlinuz higher to allow for kernels of a realistic size.

   - Loongson32 now builds the kernel targeting MIPSr1 rather than
     MIPSr2 to avoid CPU errata.

   - Loongson64 gains a couple of fixes, a workaround for a write
     buffering issue & support for the Loongson 3A R3.1 CPU.

   - Malta now uses the piix4-poweroff driver to handle powering down.

   - Microsemi Ocelot gained support for its SPI bus & NOR flash, its
     second MDIO bus and can now be supported by a FIT/.itb image.

   - Octeon saw a bunch of header cleanups which remove a lot of
     duplicate or unused code"

* tag 'mips_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (123 commits)
  MIPS: Remove remnants of UASM_ISA
  MIPS: netlogic: xlr: Remove erroneous check in nlm_fmn_send()
  MIPS: VDSO: Force link endianness
  MIPS: Always specify -EB or -EL when using clang
  MIPS: Use dins to simplify __write_64bit_c0_split()
  MIPS: Use read-write output operand in __write_64bit_c0_split()
  MIPS: Avoid using array as parameter to write_c0_kpgd()
  MIPS: vdso: Allow clang's --target flag in VDSO cflags
  MIPS: genvdso: Remove GOT checks
  MIPS: Remove obsolete MIPS checks for DST node "chosen@0"
  MIPS: generic: Remove input symbols from defconfig
  MIPS: Delete unused code in linux32.c
  MIPS: Remove unused sys_32_mmap2
  MIPS: Remove nabi_no_regargs
  mips: dts: mscc: enable spi and NOR flash support on ocelot PCB123
  mips: dts: mscc: Add spi on Ocelot
  MIPS: Loongson: Merge load addresses
  MIPS: Loongson: Set Loongson32 to MIPS32R1
  MIPS: mscc: ocelot: add interrupt controller properties to GPIO controller
  MIPS: generic: Select MIPS_AUTO_PFN_OFFSET
  ...

Pull parisc updates from Helge Deller:

 - parisc now uses the generic dma_noncoherent_ops implementation
   (Christoph Hellwig)

 - further memory barrier and spinlock improvements (John David Anglin)

 - prepare removal of current_text_addr() functions (Nick Desaulniers)

 - improve kernel stack unwinding on parisc (me)

 - drop ENOTSUP which was defined on parisc only (me)

* 'parisc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix and improve kernel stack unwinding
  parisc: Remove unnecessary barriers from spinlock.h
  parisc: Remove ordered stores from syscall.S
  parisc: prefer _THIS_IP_ and _RET_IP_ statement expressions
  parisc: Add HAVE_REGS_AND_STACK_ACCESS_API feature
  parisc: Drop architecture-specific ENOTSUP define
  parisc: use generic dma_noncoherent_ops
  parisc: always use flush_kernel_dcache_range for DMA cache maintainance
  parisc: merge pcx_dma_ops and pcxl_dma_ops

Pull ARM clkdev updates from Russell King:
 "A couple of cleanups for clkdev"

* 'clkdev' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8778/1: clkdev: don't call __of_clk_get_by_name() unnecessarily from clk_get()
  ARM: 8776/1: clkdev: Remove duplicated negative index check from __of_clk_get()

Pull ARM updates from Russell King:

 - further Spectre variant 1 fixes for user accessors.

 - kbuild cleanups (Masahiro Yamada)

 - hook up sync core functionality (Will Deacon)

 - nommu updates for hypervisor mode booting (Vladimir Murzin)

 - use compiler built-ins for fls and ffs (Nicolas Pitre)

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: spectre-v1: mitigate user accesses
  ARM: spectre-v1: use get_user() for __get_user()
  ARM: use __inttype() in get_user()
  ARM: oabi-compat: copy semops using __copy_from_user()
  ARM: vfp: use __copy_from_user() when restoring VFP state
  ARM: 8785/1: use compiler built-ins for ffs and fls
  ARM: 8784/1: NOMMU: Allow enter in Hyp mode
  ARM: 8783/1: NOMMU: Extend check for VBAR support
  ARM: 8782/1: vfp: clean up arch/arm/vfp/Makefile
  ARM: signal: copy registers using __copy_from_user()
  ARM: tcm: ensure inline stub functions are marked static
  ARM: 8779/1: add endianness option to LDFLAGS instead of LD
  ARM: 8777/1: Hook up SYNC_CORE functionality for sys_membarrier()

Pull s390 updates from Heiko Carstens:
 "Since Martin is on vacation you get the s390 pull request from me:

   - Host large page support for KVM guests. As the patches have large
     impact on arch/s390/mm/ this series goes out via both the KVM and
     the s390 tree.

   - Add an option for no compression to the "Kernel compression mode"
     menu, this will come in handy with the rework of the early boot
     code.

   - A large rework of the early boot code that will make life easier
     for KASAN and KASLR. With the rework the bootable uncompressed
     image is not generated anymore, only the bzImage is available. For
     debuggung purposes the new "no compression" option is used.

   - Re-enable the gcc plugins as the issue with the latent entropy
     plugin is solved with the early boot code rework.

   - More spectre relates changes:
      + Detect the etoken facility and remove expolines automatically.
      + Add expolines to a few more indirect branches.

   - A rewrite of the common I/O layer trace points to make them
     consumable by 'perf stat'.

   - Add support for format-3 PCI function measurement blocks.

   - Changes for the zcrypt driver:
      + Add attributes to indicate the load of cards and queues.
      + Restructure some code for the upcoming AP device support in KVM.

   - Build flags improvements in various Makefiles.

   - A few fixes for the kdump support.

   - A couple of patches for gcc 8 compile warning cleanup.

   - Cleanup s390 specific proc handlers.

   - Add s390 support to the restartable sequence self tests.

   - Some PTR_RET vs PTR_ERR_OR_ZERO cleanup.

   - Lots of bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (107 commits)
  s390/dasd: fix hanging offline processing due to canceled worker
  s390/dasd: fix panic for failed online processing
  s390/mm: fix addressing exception after suspend/resume
  rseq/selftests: add s390 support
  s390: fix br_r1_trampoline for machines without exrl
  s390/lib: use expoline for all bcr instructions
  s390/numa: move initial setup of node_to_cpumask_map
  s390/kdump: Fix elfcorehdr size calculation
  s390/cpum_sf: save TOD clock base in SDBs for time conversion
  KVM: s390: Add huge page enablement control
  s390/mm: Add huge page gmap linking support
  s390/mm: hugetlb pages within a gmap can not be freed
  KVM: s390: Add skey emulation fault handling
  s390/mm: Add huge pmd storage key handling
  s390/mm: Clear skeys for newly mapped huge guest pmds
  s390/mm: Clear huge page storage keys on enable_skey
  s390/mm: Add huge page dirty sync support
  s390/mm: Add gmap pmd invalidation and clearing
  s390/mm: Add gmap pmd notification bit setting
  s390/mm: Add gmap pmd linking
  ...

Pull x86 timer updates from Thomas Gleixner:
 "Early TSC based time stamping to allow better boot time analysis.

  This comes with a general cleanup of the TSC calibration code which
  grew warts and duct taping over the years and removes 250 lines of
  code. Initiated and mostly implemented by Pavel with help from various
  folks"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  x86/kvmclock: Mark kvm_get_preset_lpj() as __init
  x86/tsc: Consolidate init code
  sched/clock: Disable interrupts when calling generic_sched_clock_init()
  timekeeping: Prevent false warning when persistent clock is not available
  sched/clock: Close a hole in sched_clock_init()
  x86/tsc: Make use of tsc_calibrate_cpu_early()
  x86/tsc: Split native_calibrate_cpu() into early and late parts
  sched/clock: Use static key for sched_clock_running
  sched/clock: Enable sched clock early
  sched/clock: Move sched clock initialization and merge with generic clock
  x86/tsc: Use TSC as sched clock early
  x86/tsc: Initialize cyc2ns when tsc frequency is determined
  x86/tsc: Calibrate tsc only once
  ARM/time: Remove read_boot_clock64()
  s390/time: Remove read_boot_clock64()
  timekeeping: Default boot time offset to local_clock()
  timekeeping: Replace read_boot_clock64() with read_persistent_wall_and_boot_offset()
  s390/time: Add read_persistent_wall_and_boot_offset()
  x86/xen/time: Output xen sched_clock time from 0
  x86/xen/time: Initialize pv xen time in init_hypervisor_platform()
  ...

Pull x86 PTI updates from Thomas Gleixner:
 "The Speck brigade sadly provides yet another large set of patches
  destroying the perfomance which we carefully built and preserved

   - PTI support for 32bit PAE. The missing counter part to the 64bit
     PTI code implemented by Joerg.

   - A set of fixes for the Global Bit mechanics for non PCID CPUs which
     were setting the Global Bit too widely and therefore possibly
     exposing interesting memory needlessly.

   - Protection against userspace-userspace SpectreRSB

   - Support for the upcoming Enhanced IBRS mode, which is preferred
     over IBRS. Unfortunately we dont know the performance impact of
     this, but it's expected to be less horrible than the IBRS
     hammering.

   - Cleanups and simplifications"

* 'x86/pti' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  x86/mm/pti: Move user W+X check into pti_finalize()
  x86/relocs: Add __end_rodata_aligned to S_REL
  x86/mm/pti: Clone kernel-image on PTE level for 32 bit
  x86/mm/pti: Don't clear permissions in pti_clone_pmd()
  x86/mm/pti: Fix 32 bit PCID check
  x86/mm/init: Remove freed kernel image areas from alias mapping
  x86/mm/init: Add helper for freeing kernel image pages
  x86/mm/init: Pass unconverted symbol addresses to free_init_pages()
  mm: Allow non-direct-map arguments to free_reserved_area()
  x86/mm/pti: Clear Global bit more aggressively
  x86/speculation: Support Enhanced IBRS on future CPUs
  x86/speculation: Protect against userspace-userspace spectreRSB
  x86/kexec: Allocate 8k PGDs for PTI
  Revert "perf/core: Make sure the ring-buffer is mapped in all page-tables"
  x86/mm: Remove in_nmi() warning from vmalloc_fault()
  x86/entry/32: Check for VM86 mode in slow-path check
  perf/core: Make sure the ring-buffer is mapped in all page-tables
  x86/pti: Check the return value of pti_user_pagetable_walk_pmd()
  x86/pti: Check the return value of pti_user_pagetable_walk_p4d()
  x86/entry/32: Add debug code to check entry/exit CR3
  ...

Pull x86 vdso update from Thomas Gleixner:
 "Use LD to link the VDSO libs instead of indirecting trough CC which
  causes build failures with Clang"

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: vdso: Use $LD instead of $CC to link

Pull misc x86 fixes from Thomas Gleixner:
 "Two fixes for x86:

   - Provide a declaration for native_save_fl() which unbreaks the
     wreckage caused by making it 'extern inline'.

   - Fix the failing paravirt patching which is supposed to replace
     indirect with direct calls. The wreckage is caused by an incorrect
     clobber test"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/paravirt: Fix spectre-v2 mitigations for paravirt guests
  x86/irqflags: Provide a declaration for native_save_fl

Pull x86 mm updates from Thomas Gleixner:

 - Make lazy TLB mode even lazier to avoid pointless switch_mm()
   operations, which reduces CPU load by 1-2% for memcache workloads

 - Small cleanups and improvements all over the place

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Remove redundant check for kmem_cache_create()
  arm/asm/tlb.h: Fix build error implicit func declaration
  x86/mm/tlb: Make clear_asid_other() static
  x86/mm/tlb: Skip atomic operations for 'init_mm' in switch_mm_irqs_off()
  x86/mm/tlb: Always use lazy TLB mode
  x86/mm/tlb: Only send page table free TLB flush to lazy TLB CPUs
  x86/mm/tlb: Make lazy TLB mode lazier
  x86/mm/tlb: Restructure switch_mm_irqs_off()
  x86/mm/tlb: Leave lazy TLB mode at page table free time
  mm: Allocate the mm_cpumask (mm->cpu_bitmap[]) dynamically based on nr_cpu_ids
  x86/mm: Add TLB purge to free pmd/pte page interfaces
  ioremap: Update pgtable free interfaces with addr
  x86/mm: Disable ioremap free page handling on x86-PAE

Pull x86 platform updates from Thomas Gleixner:
 "Trivial cleanups and improvements"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/UV: Remove redundant check of p == q
  x86/platform/olpc: Use PTR_ERR_OR_ZERO()
  x86/platform/UV: Mark memblock related init code and data correctly

Pull x86 cache QoS (RDT/CAR) updates from Thomas Gleixner:
 "Add support for pseudo-locked cache regions.

  Cache Allocation Technology (CAT) allows on certain CPUs to isolate a
  region of cache and 'lock' it. Cache pseudo-locking builds on the fact
  that a CPU can still read and write data pre-allocated outside its
  current allocated area on cache hit. With cache pseudo-locking data
  can be preloaded into a reserved portion of cache that no application
  can fill, and from that point on will only serve cache hits. The cache
  pseudo-locked memory is made accessible to user space where an
  application can map it into its virtual address space and thus have a
  region of memory with reduced average read latency.

  The locking is not perfect and gets totally screwed by WBINDV and
  similar mechanisms, but it provides a reasonable enhancement for
  certain types of latency sensitive applications.

  The implementation extends the current CAT mechanism and provides a
  generally useful exclusive CAT mode on which it builds the extra
  pseude-locked regions"

* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
  x86/intel_rdt: Disable PMU access
  x86/intel_rdt: Fix possible circular lock dependency
  x86/intel_rdt: Make CPU information accessible for pseudo-locked regions
  x86/intel_rdt: Support restoration of subset of permissions
  x86/intel_rdt: Fix cleanup of plr structure on error
  x86/intel_rdt: Move pseudo_lock_region_clear()
  x86/intel_rdt: Limit C-states dynamically when pseudo-locking active
  x86/intel_rdt: Support L3 cache performance event of Broadwell
  x86/intel_rdt: More precise L2 hit/miss measurements
  x86/intel_rdt: Create character device exposing pseudo-locked region
  x86/intel_rdt: Create debugfs files for pseudo-locking testing
  x86/intel_rdt: Create resctrl debug area
  x86/intel_rdt: Ensure RDT cleanup on exit
  x86/intel_rdt: Resctrl files reflect pseudo-locked information
  x86/intel_rdt: Support creation/removal of pseudo-locked region
  x86/intel_rdt: Pseudo-lock region creation/removal core
  x86/intel_rdt: Discover supported platforms via prefetch disable bits
  x86/intel_rdt: Add utilities to test pseudo-locked region possibility
  x86/intel_rdt: Split resource group removal in two
  x86/intel_rdt: Enable entering of pseudo-locksetup mode
  ...

Pull x86/hyper-v update from Thomas Gleixner:
 "Add fast hypercall support for guest running on the Microsoft HyperV(isor)"

* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/hyper-v: Fix wrong merge conflict resolution
  x86/hyper-v: Check for VP_INVAL in hyperv_flush_tlb_others()
  x86/hyper-v: Check cpumask_to_vpset() return value in hyperv_flush_tlb_others_ex()
  x86/hyper-v: Trace PV IPI send
  x86/hyper-v: Use cheaper HVCALL_SEND_IPI hypercall when possible
  x86/hyper-v: Use 'fast' hypercall for HVCALL_SEND_IPI
  x86/hyper-v: Implement hv_do_fast_hypercall16
  x86/hyper-v: Use cheaper HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE} hypercalls when possible

Pull x86 dump printing cleanup from Thomas Gleixner:
 "Clean up the show_opcodes() printout so nested dumps can be properly
  differentiated"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Avoid pr_cont() in show_opcodes()

Pull x86 cpu updates from Thomas Gleixner:
 "Two small updates for the CPU code:

   - Improve NUMA emulation

   - Add the EPT_AD CPU feature bit"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpufeatures: Add EPT_AD feature bit
  x86/numa_emulation: Introduce uniform split capability
  x86/numa_emulation: Fix emulated-to-physical node mapping

Pull x86 cleanups from Thomas Gleixner:
 "Trival cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/iommu: Use NULL instead of 0
  x86/platform/pcspeaker: Use PTR_ERR_OR_ZERO() to fix ptr_ret.cocci warning

Pull x86 build cleanup from Thomas Gleixner:
 "Remove a stale quirk for a no longer supported GCC version"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Remove old -funit-at-a-time GCC quirk

Pull x86 asm updates from Thomas Gleixner:
 "The lowlevel and ASM code updates for x86:

   - Make stack trace unwinding more reliable

   - ASM instruction updates for better code generation

   - Various cleanups"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/64: Add two more instruction suffixes
  x86/asm/64: Use 32-bit XOR to zero registers
  x86/build/vdso: Simplify 'cmd_vdso2c'
  x86/build/vdso: Remove unused vdso-syms.lds
  x86/stacktrace: Enable HAVE_RELIABLE_STACKTRACE for the ORC unwinder
  x86/unwind/orc: Detect the end of the stack
  x86/stacktrace: Do not fail for ORC with regs on stack
  x86/stacktrace: Clarify the reliable success paths
  x86/stacktrace: Remove STACKTRACE_DUMP_ONCE
  x86/stacktrace: Do not unwind after user regs
  x86/asm: Use CC_SET/CC_OUT in percpu_cmpxchg8b_double() to micro-optimize code generation

Pull x86 boot updates from Thomas Gleixner:
 "Boot code updates for x86:

   - Allow to skip a given amount of huge pages for address layout
     randomization on the kernel command line to prevent regressions in
     the huge page allocation with small memory sizes

   - Various cleanups"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Use CC_SET()/CC_OUT() instead of open coding it
  x86/boot/KASLR: Make local variable mem_limit static
  x86/boot/KASLR: Skip specified number of 1GB huge pages when doing physical randomization (KASLR)
  x86/boot/KASLR: Add two new functions for 1GB huge pages handling

Pull x86 apic update from Thomas Gleixner:
 "Trivial cleanups of the APIC related code"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Trivial coding style fixes
  x86/vector: Merge allocate_vector() into assign_vector_locked()

Pull timer updates from Thomas Gleixner:
 "The timers departement more or less proudly presents:

   - More Y2038 timekeeping work mostly in the core code. The work is
     slowly, but steadily targeting the actuall syscalls.

   - Enhanced timekeeping suspend/resume support by utilizing
     clocksources which do not stop during suspend, but are otherwise
     not the main timekeeping clocksources.

   - Make NTP adjustmets more accurate and immediate when the frequency
     is set directly and not incrementally.

   - Sanitize the overrung handing of posix timers

   - A new timer driver for Mediatek SoCs

   - The usual pile of fixes and updates all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
  clockevents: Warn if cpu_all_mask is used as cpumask
  tick/broadcast-hrtimer: Use cpu_possible_mask for ce_broadcast_hrtimer
  clocksource/drivers/arm_arch_timer: Fix bogus cpu_all_mask usage
  clocksource: ti-32k: Remove CLOCK_SOURCE_SUSPEND_NONSTOP flag
  timers: Clear timer_base::must_forward_clk with timer_base::lock held
  clocksource/drivers/sprd: Register one always-on timer to compensate suspend time
  clocksource/drivers/timer-mediatek: Add support for system timer
  clocksource/drivers/timer-mediatek: Convert the driver to timer-of
  clocksource/drivers/timer-mediatek: Use specific prefix for GPT
  clocksource/drivers/timer-mediatek: Rename mtk_timer to timer-mediatek
  clocksource/drivers/timer-mediatek: Add system timer bindings
  clocksource/drivers: Set clockevent device cpumask to cpu_possible_mask
  time: Introduce one suspend clocksource to compensate the suspend time
  time: Fix extra sleeptime injection when suspend fails
  timekeeping/ntp: Constify some function arguments
  ntp: Use kstrtos64 for s64 variable
  ntp: Remove redundant arguments
  timer: Fix coding style
  ktime: Provide typesafe ktime_to_ns()
  hrtimer: Improve kernel message printing
  ...

Pull perf update from Thomas Gleixner:
 "The perf crowd presents:

  Kernel updates:

   - Removal of jprobes

   - Cleanup and consolidatation the handling of kprobes

   - Cleanup and consolidation of hardware breakpoints

   - The usual pile of fixes and updates to PMUs and event descriptors

  Tooling updates:

   - Updates and improvements all over the place. Nothing outstanding,
     just the (good) boring incremental grump work"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
  perf trace: Do not require --no-syscalls to suppress strace like output
  perf bpf: Include uapi/linux/bpf.h from the 'perf trace' script's bpf.h
  perf tools: Allow overriding MAX_NR_CPUS at compile time
  perf bpf: Show better message when failing to load an object
  perf list: Unify metric group description format with PMU event description
  perf vendor events arm64: Update ThunderX2 implementation defined pmu core events
  perf cs-etm: Generate branch sample for CS_ETM_TRACE_ON packet
  perf cs-etm: Generate branch sample when receiving a CS_ETM_TRACE_ON packet
  perf cs-etm: Support dummy address value for CS_ETM_TRACE_ON packet
  perf cs-etm: Fix start tracing packet handling
  perf build: Fix installation directory for eBPF
  perf c2c report: Fix crash for empty browser
  perf tests: Fix indexing when invoking subtests
  perf trace: Beautify the AF_INET & AF_INET6 'socket' syscall 'protocol' args
  perf trace beauty: Add beautifiers for 'socket''s 'protocol' arg
  perf trace beauty: Do not print NULL strarray entries
  perf beauty: Add a generator for IPPROTO_ socket's protocol constants
  tools include uapi: Grab a copy of linux/in.h
  perf tests: Fix complex event name parsing
  perf evlist: Fix error out while applying initial delay and LBR
  ...