rhashtable_lookup_fast() returns NULL pointer not ERR_PTR().
Return rhashtable_lookup_fast() directly to fix this.

Fixes: 47327e19 ("net: prestera: acl: migrate to new vTCAM api")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove assignment here.

For the details one may look into the of_gpio_dev_init() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Short-lived connections increase the insertion rate requirements,
fill the offload table and provide very limited offload value since
they process a very small amount of packets. The ct ASSURED flag is
designed to filter short-lived connections for early expiration.

Offload connections when they are ESTABLISHED and ASSURED.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Guangbin Huang says:

====================
net: hns3: some cleanups for -next

To improve code readability and simplicity, this series add some cleanup
patches for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The hns3 driver header file uses the structure of other files, but does
not include corresponding file, which causes a check warning that the
header file is not self-contained.

Therefore, the required header file is included in the header file, and
the structure declaration is added to the header file to avoid cyclic
dependency of the header file.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace one tab with space between symbol ')' and '{' in for statement of
function hclge_map_tqp().
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Return value judgment should follow the function call, so remove line
between them.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When we use hclge_dbg_fill_content() to fill contents with
specific format according to struct hclge_dbg_item *items,
it may cause content cover due to unreasonable items.

So add comments to explain how to avoid it.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add void before function which don't receive ret to improve code
readability.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change output value type of atomic_read() from %u to %d.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The argument len will not be changed in hclge_ncl_config_data_print(), it
is no need to declare as a pointer, so modify it into int type.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The c language has a set of implicit type conversions, when
two variables perform bitwise or arithmetic operations.

For example, variable A (type u16/u8) -1, its output is int type variable.
u16/u8 will convert to int type implicitly before it does arithmetic
operations. So, change 1 to unsigned type.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds print vport id when failed to get or set vlan
filter parameters.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function hclge_set_vlan_filter_hw() is a bit too long, so add a new
function hclge_need_update_port_vlan() to simplify code and improve
code readability.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hclge_cfg_common_loopback() is a bit too long, so
encapsulate hclge_cfg_common_loopback_cmd_send() and
hclge_cfg_common_loopback_wait() two functions to
improve readability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2021-12-02

Misc updates to mlx5 driver

1) Various code cleanups
2) Error path handling fixes of latest features
3) Print more information on pci error handling
4) Dynamically resize flow counters query buffer
====================

Link: https://lore.kernel.org/r/20211203005622.183325-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The flow counters bulk query buffer is allocated once during
mlx5_fc_init_stats(). For PFs and VFs this buffer usually takes a little
more than 512KB of memory, which is aligned to the next power of 2, to
1MB. For SFs, this buffer is reduced and takes around 128 Bytes.

The buffer size determines the maximum number of flow counters that
can be queried at a time. Thus, having a bigger buffer can improve
performance for users that need to query many flow counters.

There are cases that don't use many flow counters and don't need a big
buffer (e.g. SFs, VFs). Since this size is critical with large scale,
in these cases the buffer size should be reduced.

In order to reduce memory consumption while maintaining query
performance, change the query buffer's allocation scheme to the
following:
- First allocate the buffer with small initial size.
- If the number of counters surpasses the initial size, resize the
  buffer to the maximum size.

The buffer only grows and isn't shrank, because users with many flow
counters don't care about the buffer size and we don't want to add
resize overhead if the current number of counters drops.

This solution is preferable to the current one, which is less accurate
and only addresses SFs.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Setting flow attr ip_version is not related to parsing tc flow actions.
It needs to be set after parsing flower matches which changes the spec.
So move it outside parse_tc_fdb_actions() and set it in
__mlx5e_add_fdb_flow().
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Remove duplicate checks on flow_action by using common function.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Passing actions is redundant and can be retrieved from flow attr.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Passing actions is redundant and can be retrieved from flow.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Remove the action stack var from parse tc fdb actions
and prase tc nic actions, use the flow attr action var directly.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

No calls for mlx5e_num_channels_changed() out of en_main.c,
turn it static and remove from header.
Keep the wrapper function mlx5e_num_channels_changed_ctx exposed.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

This commit reduces unused variable from MLX5E_MAX_KLM_PER_WQE macro that
introduced by commit d7b896ac ("net/mlx5e: Add support to klm_umr_wqe").
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In case mlx5_pci_err_detected was called with state equals to
pci_channel_io_perm_failure, the driver will never come back up.

It is nice to know why the driver went to zombie land, so print some
useful information on pci err handlers.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>

This code sometimes calls mlx5_sf_hw_table_hwc_init() when "ext_base_id"
is uninitialized.  It's not used on that path, but it generates a static
checker warning to pass uninitialized variables to another function.
It may also generate runtime UBSan  warnings depending on if the
mlx5_sf_hw_table_hwc_init() function is inlined or not.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

All the error handling paths of 'mlx5e_tc_add_fdb_flow()' end to 'err_out'
where 'flow_flag_set(flow, FAILED);' is called.

All but the new error handling paths added by the commits given in the
Fixes tag below.

Fix these error handling paths and branch to 'err_out'.

Fixes: 166f431e ("net/mlx5e: Add indirect tc offload of ovs internal port")
Fixes: b16eb3c8 ("net/mlx5: Support internal port as decap route device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 85c5f7c9 ("net/mlx5: E-switch, Create QoS on demand")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The mlx5e_sw_stats structure has grown to the point of triggering
a warning when put on the stack of a function:

mlx5/core/ipoib/ipoib.c: In function 'mlx5i_grp_sw_update_stats':
mlx5/core/ipoib/ipoib.c:136:1: error: the frame size of 1028 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

In this case, only five of the structure members are actually set,
so it's sufficient to have those as separate local variables.
As en_rep.c uses 'struct rtnl_link_stats64' for this, just use
the same one here for consistency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When PSAMPLE is a loadable module, built-in drivers cannot use it:

aarch64-linux-ld: drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.o: in function `mlx5e_tc_sample_skb':
sample.c:(.text+0xd68): undefined reference to `psample_sample_packet'

Add the same dependency here that is used for MLXSW
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless, and wireguard.

  Mostly scattered driver changes this week, with one big clump in
  mv88e6xxx. Nothing of note, really.

  Current release - regressions:

   - smc: keep smc_close_final()'s error code during active close

  Current release - new code bugs:

   - iwlwifi: various static checker fixes (int overflow, leaks, missing
     error codes)

   - rtw89: fix size of firmware header before transfer, avoid crash

   - mt76: fix timestamp check in tx_status; fix pktid leak;

   - mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set()

  Previous releases - regressions:

   - smc: fix list corruption in smc_lgr_cleanup_early

   - ipv4: convert fib_num_tclassid_users to atomic_t

  Previous releases - always broken:

   - tls: fix authentication failure in CCM mode

   - vrf: reset IPCB/IP6CB when processing outbound pkts, prevent
     incorrect processing

   - dsa: mv88e6xxx: fixes for various device errata

   - rds: correct socket tunable error in rds_tcp_tune()

   - ipv6: fix memory leak in fib6_rule_suppress

   - wireguard: reset peer src endpoint when netns exits

   - wireguard: improve resilience to DoS around incoming handshakes

   - tcp: fix page frag corruption on page fault which involves TCP

   - mpls: fix missing attributes in delete notifications

   - mt7915: fix NULL pointer dereference with ad-hoc mode

  Misc:

   - rt2x00: be more lenient about EPROTO errors during start

   - mlx4_en: update reported link modes for 1/10G"

* tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
  net: dsa: b53: Add SPI ID table
  gro: Fix inconsistent indenting
  selftests: net: Correct case name
  net/rds: correct socket tunable error in rds_tcp_tune()
  mctp: Don't let RTM_DELROUTE delete local routes
  net/smc: Keep smc_close_final rc during active close
  ibmvnic: drop bad optimization in reuse_tx_pools()
  ibmvnic: drop bad optimization in reuse_rx_pools()
  net/smc: fix wrong list_del in smc_lgr_cleanup_early
  Fix Comment of ETH_P_802_3_MIN
  ethernet: aquantia: Try MAC address from device tree
  ipv4: convert fib_num_tclassid_users to atomic_t
  net: avoid uninit-value from tcp_conn_request
  net: annotate data-races on txq->xmit_lock_owner
  octeontx2-af: Fix a memleak bug in rvu_mbox_init()
  net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()
  vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit
  net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()
  net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed
  net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family
  ...

Pull tracing fixes from Steven Rostedt:
 "Three tracing fixes:

   - Allow compares of strings when using signed and unsigned characters

   - Fix kmemleak false positive for histogram entries

   - Handle negative numbers for user defined kretprobe data sizes"

* tag 'trace-v5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  kprobes: Limit max data_size of the kretprobe instances
  tracing: Fix a kmemleak false positive in tracing_map
  tracing/histograms: String compares should not care about signed values

Pull IPMI fixes from Corey Minyard:
 "Some changes that went in 5.16 had issues. When working on the design
  a piece was redesigned and things got missed. And the message type was
  not being initialized when it was allocated, resulting in crashes.

  In addition, the IPMI driver has had a shutdown issue where it could
  still have an item in a system workqueue after it had been shutdown.
  Move to a private workqueue to avoid that problem"

* tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi:
  ipmi:ipmb: Fix unknown command response
  ipmi: fix IPMI_SMI_MSG_TYPE_IPMB_DIRECT response length checking
  ipmi: fix oob access due to uninit smi_msg type
  ipmi: msghandler: Make symbol 'remove_work_wq' static
  ipmi: Move remove_work to dedicated workqueue

$ ./fcnal-test.sh -t help
Test names: help

Looks it intent to list the available tests but it didn't do the right
thing. I will add another option the do that in the later patch.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently autoloading for SPI devices does not use the DT ID table, it
uses SPI modalises. Supporting OF modalises is going to be difficult if
not impractical, an attempt was made but has been reverted, so ensure
that module autoloading works for this driver by adding an id_table
listing the SPI IDs for everything.

Fixes: 96c8395e ("spi: Revert modalias changes")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The lan966x is using the function 'packing' to create/extract the
information for the IFH, that is used to be added in front of the frames
when they are injected/extracted.
Therefore update the Kconfig to select config option 'PACKING' whenever
lan966x driver is enabled.

Fixes: db8bcaad ("net: lan966x: add the basic lan966x driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>