- 14 Feb, 2019 40 commits
-
-
Huang Zijiang authored
The skb should be freed by dev_consume_skb_any() in efx_tx_tso_fallback() when skb is still used. The skb will be replaced by segments, so the original skb should be consumed(not drop). Signed-off-by:
Huang Zijiang <huang.zijiang@zte.com.cn> Acked-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huang Zijiang authored
The skb should be freed by dev_consume_skb_any() in macb_pad_and_fcs() when *skb is still used. The *skb is be replaced by nskb, so the original *skb should be consumed(not drop). Signed-off-by:
-
Huang Zijiang authored
dev_consume_skb_irq() should be called when skb xmit done.It makes drop profiles more friendly. Signed-off-by:
-
Huang Zijiang authored
modify the code style in order to removing the following warning when excute the script checkpatch.pl WARNING: space prohibited between function name and open parenthesis '(' Signed-off-by: -
Huang Zijiang authored
The skb should be freed by dev_consume_skb_any() in hfcpci_fill_fifo() when bcs->tx_skb is still used. The bcs->tx_skb is be replaced by skb_dequeue(&bcs->squeue), so the original bcs->tx_skb should be consumed(not drop). Signed-off-by:
-
Randy Dunlap authored
Fix the kconfig warning in IPVLAN_L3S when neither INET nor IPV6 is enabled: WARNING: unmet direct dependencies detected for NET_L3_MASTER_DEV Depends on [n]: NET [=y] && (INET [=n] || IPV6 [=n]) Selected by [y]: - IPVLAN_L3S [=y] && NETDEVICES [=y] && NET_CORE [=y] && NETFILTER [=y] Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called in w90p910_ether_start_xmit() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by:
Yang Wei <yang.wei9@zte.com.cn> Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called in ks8695_tx_irq() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called in myri10ge_tx_done() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by:
-
Yang Wei authored
dev_consume_skb_irq() should be called in intr_handler() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Remove a redundant blank line in intr_handler(). Signed-off-by:
-
David S. Miller authored
Deepa Dinamani says: ==================== uapi: Add a new header for time types The series aims at adding a new time header: time_types.h. This header is what will eventually hold all the uapi time types that we plan to leave across the interfaces after the y2038 cleanup. The series was discussed with Arnd Bergmann. The second patch fixes the errqueue.h header, which has a dependency on these types. Note that there may be a trivial merge conflict with linux-next c70a772f ("y2038: remove struct definition redirects"). ==================== Signed-off-by:
-
Deepa Dinamani authored
Now that we have a separate header for struct __kernel_timespec, include it directly without relying on userspace to do it. Reported-by:
Ran Rozenstein <ranro@mellanox.com> Signed-off-by:
Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by:
-
Deepa Dinamani authored
sys/time.h is the mandated include for many time related defines. However, linux/time.h overlaps sys/time.h significantly and this makes including both from userspace or one from the other impossible. This also means that userspace can get away with including sys/time.h whenever it needs linux/time.h and this is what's been happening in the user world usually. But, we have new data types that we plan to use in the uapi time interfaces also defined in the linux/time.h. But, we are unable to use these types when sys/time.h is included. Hence, move the new types to a new header, time_types.h. We intend to eventually have all the uapi defines that the kernel uses defined in this header. Note that the plan is to replace uapi interfaces with timeval to use __kernel_old_timeval, timespec to use __kernel_old_timespec etc. Reported-by:
-
David S. Miller authored
Parav Pandit says: ==================== devlink: 2 fixes for devlink region read This 2 patches consist of fixes for devlink region read handling. v0->v1: - Fixed typo from user to use v1->v2: - Rebased ==================== Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Parav Pandit authored
While finding the devlink device during region reading, devlink device list is accessed and devlink device is returned without holding a lock. This could lead to use-after-free accesses. While at it, add lockdep assert to ensure that all future callers hold the lock when calling devlink_get_from_attrs(). Fixes: 4e54795a ("devlink: Add support for region snapshot read command") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Parav Pandit authored
devlink_nl_cmd_region_read_dumpit() misses to return right error code on most error conditions. Return the right error code on such errors. Fixes: 4e54795a ("devlink: Add support for region snapshot read command") Signed-off-by:
-
Tonghao Zhang authored
This patch is a little improvement. If user use the command shown as below, we should print the info [1] instead of [2]. The eth0 exists actually, and it may confuse user. $ echo "eth0" > /sys/class/net/bond4/bonding/slaves [1] "bond4: no command found in slaves file - use +ifname or -ifname" [2] "write error: No such device" Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: hwmon and thermal extensions Vadim says: This patchset contains various improvements to hwmon and thermal code in mlxsw. The most significant improvement is the ability to read modules' temperature attributes (input, fault, critical and emergency thresholds) as well as fans' fault indication. These new attributes will improve the ability to monitor the system. Patches #1-#4 add the necessary device registers and APIs to read modules' temperature attributes and fans' fault indication. Patches #5-#8 perform small improvements in hwmon and thermal code such as using a more indicative name for cooling devices. Patch #9 exposes fans' fault indication via hwmon. Patch #10 exposes modules' temperature attributes via hwmon. Patch #11 adds an hwmon label to modules' temperature sensor. This helps to parse the output of utilities such as "sensors". Patch #12 allows to bind an external cooling device ("mlxreg-fan") to mlxsw thermal zone. This will allow the mlxsw thermal zone to change the cooling level of cooling devices not programmed via switch registers. ==================== Signed-off-by: -
Vadim Pasternak authored
Allow thermal zone binding to an external cooling device from the cooling devices white list. It provides support for Mellanox next generation systems on which cooling device logic is not controlled through the switch registers. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Vadim Pasternak authored
Add label attribute to hwmon object for exposing QSFP module's temperature sensor name. Modules are labeled as "front panel xxx". The label is used by utilities such as "sensors": front panel 001: +0.0C (crit = +0.0C, emerg = +0.0C) .. front panel 020: +31.0C (crit = +70.0C, emerg = +80.0C) .. front panel 056: +41.0C (crit = +70.0C, emerg = +80.0C) Signed-off-by:
-
Vadim Pasternak authored
Add new attributes to hwmon object for exposing QSFP module temperature input, fault indication, critical and emergency thresholds. Temperature input and fault indication are read from Management Temperature Bulk Register. Temperature thresholds are read from Management Cable Info Access Register. Signed-off-by:
-
Vadim Pasternak authored
Add new fan hwmon attribute for exposing fan faults (fault indication is read from Fan Out of Range Event Register). Signed-off-by:
-
Vadim Pasternak authored
Rename cooling device from "Fan" to "mlxsw_fan". Name "Fan" is too common name, and such name is misleading, while it's interpreted by user. For example name "Fan" could be used by ACPI. Signed-off-by:
-
Vadim Pasternak authored
Replace thermal hardcoded temperature trip values with defines. Signed-off-by:
-
Vadim Pasternak authored
Modify thermal zone trip points setting for better alignment with system thermal requirement. Add hysteresis thresholds for thermal trips in order to avoid throttling around thermal trip point. If hysteresis temperature is not considered, PWM can have side effect of flip up/down on thermal trip point boundary. Signed-off-by:
-
Vadim Pasternak authored
Add low frequency bus capability in order to allow core functionality separation based on bus type. Driver could run over PCIe, which is considered as high frequency bus or I2C, which is considered as low frequency bus. In the last case time setting, for example, for thermal polling interval, should be increased. Use different thermal monitoring based on bus type. For I2C bus time is set to 20 seconds, while for PCIe 1 second polling interval is used. Signed-off-by:
-
Vadim Pasternak authored
Add new API to read QSFP module's temperature thresholds - warning and critical. New internal API reads the temperature thresholds from the modules, which are equipped with the thermal sensor. These thresholds will be exposed via hwmon subsystem. Signed-off-by:
-
Vadim Pasternak authored
Add FORE (Fan Out of Range Event Register), which is used for fan fault reading. Signed-off-by:
-
Vadim Pasternak authored
Add MTBR (Management Temperature Bulk Register), which is used for port temperature reading in a bulk mode. Signed-off-by:
-
Vadim Pasternak authored
Move QSFP EEPROM definitions to common location from the spectrum driver in order to make them available for other mlxsw modules. They are common for all kind of chips and have relation to SFF specifications 8024, 8436, 8472, 8636, rather than to chip type. Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - fix memory leak in in batadv_dat_put_dhcp, by Martin Weinelt - fix typo, by Sven Eckelmann - netlink restructuring patch series (part 2), by Sven Eckelmann (19 patches) ==================== Signed-off-by: -
Dan Carpenter authored
We need to set the error message on this path otherwise some of the callers, such as test_hints_case(), print from an uninitialized pointer. We had a similar bug earlier and set "errmsg" to NULL in the caller, test_delta_action_item(). That code is no longer required so I have removed it. Fixes: 9069a381 ("lib: objagg: implement optimization hints assembly and use hints for object creation") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Dan Carpenter authored
There is a typo here. We intended to check "objagg2" but we instead test "objagg" which is not an error pointer. Fixes: 9069a381 ("lib: objagg: implement optimization hints assembly and use hints for object creation") Signed-off-by:
-
Dan Carpenter authored
We need to set the error code on this path otherwise we return ERR_PTR(0) which would result in a NULL dereference in the caller. Fixes: 9069a381 ("lib: objagg: implement optimization hints assembly and use hints for object creation") Signed-off-by:
-
Vishal Kulkarni authored
CR4_QSFP 10G Speed technology should be 10000baseKR_Full And also report available FEC modes. Signed-off-by:
Vishal Kulkarni <vishal@chelsio.com> Signed-off-by:
-
David S. Miller authored
Jesper Dangaard Brouer says: ==================== Fix page_pool API and dma address storage As pointed out by David Miller in [1] the current page_pool implementation stores dma_addr_t in page->private. This won't work on 32-bit platforms with 64-bit DMA addresses since the page->private is an unsigned long and the dma_addr_t a u64. Since no driver is yet using the DMA mapping capabilities of the API let's fix this by storing the information in 'struct page' and use that to store and retrieve DMA addresses from network drivers. As long as the addresses returned from dma_map_page() are aligned the first bit, used by the compound pages code should not be set. Ilias tested the first two patches on Espressobin driver mvneta, for which we have patches for using the DMA API of page_pool. [1]: https://lore.kernel.org/netdev/20181207.230655.1261252486319967024.davem@davemloft.net/ ==================== Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
-
Jesper Dangaard Brouer authored
As pointed out by Alexander Duyck, the DMA mapping done in page_pool needs to use the DMA attribute DMA_ATTR_SKIP_CPU_SYNC. As the principle behind page_pool keeping the pages mapped is that the driver takes over the DMA-sync steps. Reported-by:
Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by:
-
