- 01 Dec, 2021 4 commits
-
-
Zack Rusin authored
For larger (bigger than a page) and noncontiguous mobs we have to create page tables that allow the host to find the memory. Those page tables just used regular system memory. Unfortunately in TTM those BO's are not allowed to be busy thus can't be fenced and we have to fence those bo's because we don't want to destroy the page tables while the host is still executing the command buffers which might be accessing them. To solve it we introduce a new placement VMW_PL_SYSTEM which is very similar to TTM_PL_SYSTEM except that it allows fencing. This fixes kernel oops'es during unloading of the driver (and pci hot remove/add) which were caused by busy BO's in TTM_PL_SYSTEM being present in the delayed deletion list in TTM (TTM_PL_SYSTEM manager is destroyed before the delayed deletions are executed) Signed-off-by:
Zack Rusin <zackr@vmware.com> Reviewed-by:
Martin Krastev <krastevm@vmware.com> Cc: Christian König <christian.koenig@amd.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211105193845.258816-5-zackr@vmware.com
-
Zack Rusin authored
Some of our hosts have a bug where rescaning a pci bus results in stale fifo memory being mapped on the host. This makes any fifo communication impossible resulting in various kernel crashes. Instead of unexpectedly crashing, predictably fail to load the driver which will preserve the system. Fixes: fb1d9738 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU") Signed-off-by:
-
Zack Rusin authored
The ttm mem global state was leaking if the vmwgfx driver load failed. In case of a driver load failure we have to make sure we also release the ttm mem global state. Signed-off-by:
-
Zack Rusin authored
TTM during the transition to the new page allocator lost the ability to constrain the allocations via the lower_mem_limit. The code has been unused since the change: 256dd44b ("drm/ttm: nuke old page allocator") and there's no reason to keep it. Fixes: 256dd44b ("drm/ttm: nuke old page allocator") Signed-off-by:
-
- 30 Nov, 2021 13 commits
-
-
Christian König authored
Calling dma_resv_add_excl_fence() with the fence as NULL and expecting that that this frees up the fences is simply abuse of the internals of the dma_resv object. v2: drop the fence pruning completely. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211129120659.1815-4-christian.koenig@amd.com
-
Christian König authored
This is just abusing internals of the dma_resv object. Signed-off-by:
-
Maarten Lankhorst authored
The signaled bit is already used for quick testing if a fence is signaled. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by:
-
Christian König authored
I'm not sure why it is useful to know the number of fences in the reservation object, but we try to avoid exposing the dma_resv_shared_list() function. So use the iterator instead. If more information is desired we could use dma_resv_describe() as well. Signed-off-by:
-
Peter Collingbourne authored
It has been observed that with certain monitors such as the HP Z27n, the register 0x825e reads a value of 0x79 when the HDMI cable is connected and 0x78 when it is disconnected, i.e. bit 0 appears to correspond to the HDMI connection status and bit 2 is never set. Therefore, change the driver to check bit 0 instead of bit 2. Signed-off-by:
Peter Collingbourne <pcc@google.com> Link: https://linux-review.googlesource.com/id/I7e76411127e1ce4988a3f6d0c8ba5f1c3d880c23Reviewed-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211117020724.2647769-1-pcc@google.com
-
Thomas Zimmermann authored
Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting KMS helpers and CMA will now automatically enable CMA KMS helpers. Some drivers' Kconfig files did not correctly select KMS or CMA helpers. Fix this as part of the change. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Thomas Zimmermann authored
The MIPI DBI helpers access struct drm_gem_cma_object.vaddr in a few places. Replace all instances with the correct generic GEM functions. Use drm_gem_fb_vmap() for mapping a framebuffer's GEM objects and drm_gem_fb_vunmap() for unmapping them. This removes the dependency on CMA helpers within MIPI DBI. Signed-off-by:
-
Thomas Zimmermann authored
Change all GEM CMA object functions that receive a GEM object of type struct drm_gem_object to expect an object of type struct drm_gem_cma_object instead. This change reduces the number of upcasts from struct drm_gem_object by moving them into callers. The C compiler can now verify that the GEM CMA functions are called with the correct type. For consistency, the patch also renames drm_gem_cma_free_object to drm_gem_cma_free. It further updates documentation for a number of functions. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211115120148.21766-4-tzimmermann@suse.de
-
Thomas Zimmermann authored
Wrap GEM CMA functions for struct drm_gem_object_funcs and update all callers. This will allow for an update of the public interfaces of the GEM CMA helper library. Signed-off-by:
-
Thomas Zimmermann authored
Restructure the header file for CMA helpers by moving declarations for driver and file operations to the end of the file. No functional changes. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211115120148.21766-2-tzimmermann@suse.de
-
Thomas Zimmermann authored
The DRM hashtable code is only used by internal functions for legacy UMS drivers. Move the implementation behind CONFIG_DRM_LEGACY and the declarations into legacy header files. Unexport the symbols. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211129094841.22499-4-tzimmermann@suse.de
-
Thomas Zimmermann authored
Besides some legacy code, vmwgfx is the only user of DRM's hash- table implementation. Copy the code into the driver, so that the core code can be retired. No functional changes. However, the real solution for vmwgfx is to use Linux' generic hash-table functions. v2: * add TODO item for updating vmwgfx (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Remove the include statement for drm_hashtab.h. It's not required by TTM. Signed-off-by:
-
- 29 Nov, 2021 1 commit
-
-
Cai Huoqing authored
Mark 'tidss_pm_ops' as __maybe_unused to avoid the warning: unused variable 'tidss_pm_ops' Fixes: 6e120594 ("drm/tidss: Make use of the helper macro SET_RUNTIME_PM_OPS()") Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by:
-
- 27 Nov, 2021 7 commits
-
-
Javier Martinez Canillas authored
The patch for commit 6a2d2ddf ("drm: Move nomodeset kernel parameter to the DRM subsystem") was generated with config 'diff.noprefix true'. But later was applied using 'cat nomodeset.mbox | dim apply-branch' on a machine with 'diff.noprefix false'. And command 'git am --scissors -3' as used by the dim tool doesn't handle that case well, since the 3-way merge wrongly resolves the path for new file drivers/gpu/drm/drm_nomodeset.c as gpu/drm/drm_nomodeset.c instead. It led to the following build error as reported by the kernel test robot: make[4]: *** No rule to make target 'drivers/gpu/drm/drm_nomodeset.o', needed by 'drivers/gpu/drm/built-in.a'. Fixes: 6a2d2ddf ("drm: Move nomodeset kernel parameter to the DRM subsystem") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
-
Javier Martinez Canillas authored
The message printed when nomodeset is present in the kernel command line makes it look as if the parameter must never be used and it's a bad idea. But there are valid reasons to use this parameter and the message should not imply otherwise. Change the text to be more accurate and restrained. Suggested-by:
Jani Nikula <jani.nikula@intel.com> Acked-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-7-javierm@redhat.com
-
Javier Martinez Canillas authored
The nomodeset kernel command line parameter is not documented. Its name is quite vague and is not intuitive what's the behaviour when it is set. Document in kernel-parameters.txt what actually happens when nomodeset is used. That way, users could know if they want to enable this option. Signed-off-by:
-
Javier Martinez Canillas authored
This relationship was only for historical reasons and the nomodeset option should be available even on platforms that don't enable CONFIG_VGA_CONSOLE. Suggested-by:
-
Javier Martinez Canillas authored
The "nomodeset" kernel cmdline parameter is handled by the vgacon driver but the exported vgacon_text_force() symbol is only used by DRM drivers. It makes much more sense for the parameter logic to be in the subsystem of the drivers that are making use of it. Let's move the vgacon_text_force() function and related logic to the DRM subsystem. While doing that, rename it to drm_firmware_drivers_only() and make it return true if "nomodeset" was used and false otherwise. This is a better description of the condition that the drivers are testing for. Suggested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-4-javierm@redhat.com
-
Javier Martinez Canillas authored
It is already handled by the console.h macro since a stub inline function is defined for vgacon_text_force() if CONFIG_VGA_CONSOLE is not set. There's no need to have ifdefery in the driver when calling the function. Signed-off-by:
-
Javier Martinez Canillas authored
The nomodeset kernel parameter handler already prints a message that the DRM drivers will be disabled, so there's no need for drivers to do that. Suggested-by:
-
- 26 Nov, 2021 1 commit
-
-
Claudio Suarez authored
DRM_DEBUG_* and DRM_* log calls are deprecated. Change them to drm_dbg_* / drm_{err,info,...} calls in drm core files. To avoid making a very big patch, this change is split in smaller patches. This one includes drm_a*.c Signed-off-by:Claudio Suarez <cssk@net-c.es> Signed-off-by:
-
- 25 Nov, 2021 2 commits
-
-
Martyn Welch authored
In the configuration used by the b850v3, the STDP2690 is used to read EDID data whilst it's the STDP4028 which can detect when monitors are connected. This can result in problems at boot with monitors connected when the STDP4028 is probed first, a monitor is detected and an attempt is made to read the EDID data before the STDP2690 has probed: [ 3.795721] Unable to handle kernel NULL pointer dereference at virtual address 00000018 [ 3.803845] pgd = (ptrval) [ 3.806581] [00000018] *pgd=00000000 [ 3.810180] Internal error: Oops: 5 [#1] SMP ARM [ 3.814813] Modules linked in: [ 3.817879] CPU: 0 PID: 64 Comm: kworker/u4:1 Not tainted 5.15.0 #1 [ 3.824161] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 3.830705] Workqueue: events_unbound deferred_probe_work_func [ 3.836565] PC is at stdp2690_get_edid+0x44/0x19c [ 3.841286] LR is at ge_b850v3_lvds_get_modes+0x2c/0x5c [ 3.846526] pc : [<805eae10>] lr : [<805eb138>] psr: 80000013 [ 3.852802] sp : 81c359d0 ip : 7dbb550b fp : 81c35a1c [ 3.858037] r10: 81c73840 r9 : 81c73894 r8 : 816d9800 [ 3.863270] r7 : 00000000 r6 : 81c34000 r5 : 00000000 r4 : 810c35f0 [ 3.869808] r3 : 80e3e294 r2 : 00000080 r1 : 00000cc0 r0 : 81401180 [ 3.876349] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 3.883499] Control: 10c5387d Table: 1000404a DAC: 00000051 [ 3.889254] Register r0 information: slab kmem_cache start 81401180 pointer offset 0 [ 3.897034] Register r1 information: non-paged memory [ 3.902097] Register r2 information: non-paged memory [ 3.907160] Register r3 information: non-slab/vmalloc memory [ 3.912832] Register r4 information: non-slab/vmalloc memory [ 3.918503] Register r5 information: NULL pointer [ 3.923217] Register r6 information: non-slab/vmalloc memory [ 3.928887] Register r7 information: NULL pointer [ 3.933601] Register r8 information: slab kmalloc-1k start 816d9800 pointer offset 0 size 1024 [ 3.942244] Register r9 information: slab kmalloc-2k start 81c73800 pointer offset 148 size 2048 [ 3.951058] Register r10 information: slab kmalloc-2k start 81c73800 pointer offset 64 size 2048 [ 3.959873] Register r11 information: non-slab/vmalloc memory [ 3.965632] Register r12 information: non-paged memory [ 3.970781] Process kworker/u4:1 (pid: 64, stack limit = 0x(ptrval)) [ 3.977148] Stack: (0x81c359d0 to 0x81c36000) [ 3.981517] 59c0: 80b2b668 80b2b5bc 000002e2 0000034e [ 3.989712] 59e0: 81c35a8c 816d98e8 81c35a14 7dbb550b 805bfcd0 810c35f0 81c73840 824addc0 [ 3.997906] 5a00: 00001000 816d9800 81c73894 81c73840 81c35a34 81c35a20 805eb138 805eadd8 [ 4.006099] 5a20: 810c35f0 00000045 81c35adc 81c35a38 80594188 805eb118 80d7c788 80dd1848 [ 4.014292] 5a40: 00000000 81c35a50 80dca950 811194d3 80dca7c4 80dca944 80dca91c 816d9800 [ 4.022485] 5a60: 81c34000 81c760a8 816d9800 80c58c98 810c35f0 816d98e8 00001000 00001000 [ 4.030678] 5a80: 00000000 00000000 8017712c 81c60000 00000002 00000001 00000000 00000000 [ 4.038870] 5aa0: 816d9900 816d9900 00000000 7dbb550b 805c700c 00000008 826282c8 826282c8 [ 4.047062] 5ac0: 00001000 81e1ce40 00001000 00000002 81c35bf4 81c35ae0 805d9694 80593fc0 [ 4.055255] 5ae0: 8017a970 80179ad8 00000179 00000000 81c35bcc 81c35b00 80177108 8017a950 [ 4.063447] 5b00: 00000000 81c35b10 81c34000 00000000 81004fd8 81010a38 00000000 00000059 [ 4.071639] 5b20: 816d98d4 81fbb718 00000013 826282c8 8017a940 81c35b40 81134448 00000400 [ 4.079831] 5b40: 00000178 00000000 e063b9c1 00000000 c2000049 00000040 00000000 00000008 [ 4.088024] 5b60: 82628300 82628380 00000000 00000000 81c34000 00000000 81fbb700 82628340 [ 4.096216] 5b80: 826283c0 00001000 00000000 00000010 816d9800 826282c0 801766f8 00000000 [ 4.104408] 5ba0: 00000000 81004fd8 00000049 00000000 00000000 00000001 80dcf940 80178de4 [ 4.112601] 5bc0: 81c35c0c 7dbb550b 80178de4 81fbb700 00000010 00000010 810c35f4 81e1ce40 [ 4.120793] 5be0: 81c40908 0000000c 81c35c64 81c35bf8 805a7f18 805d94a0 81c35c3c 816d9800 [ 4.128985] 5c00: 00000010 81c34000 81c35c2c 81c35c18 8012fce0 805be90c 81c35c3c 81c35c28 [ 4.137178] 5c20: 805be90c 80173210 81fbb600 81fbb6b4 81c35c5c 7dbb550b 81c35c64 81fbb700 [ 4.145370] 5c40: 816d9800 00000010 810c35f4 81e1ce40 81c40908 0000000c 81c35c84 81c35c68 [ 4.153565] 5c60: 805a8c78 805a7ed0 816d9800 81fbb700 00000010 00000000 81c35cac 81c35c88 [ 4.161758] 5c80: 805a8dc4 805a8b68 816d9800 00000000 816d9800 00000000 8179f810 810c42d0 [ 4.169950] 5ca0: 81c35ccc 81c35cb0 805e47b0 805a8d18 824aa240 81e1ea80 81c40908 81126b60 [ 4.178144] 5cc0: 81c35d14 81c35cd0 8060db1c 805e46cc 81c35d14 81c35ce0 80dd90f8 810c4d58 [ 4.186338] 5ce0: 80dd90dc 81fe9740 fffffffe 81fe9740 81e1ea80 00000000 810c4d6c 80c4b95c [ 4.194531] 5d00: 80dd9a3c 815c6810 81c35d34 81c35d18 8060dc9c 8060d8fc 8246b440 815c6800 [ 4.202724] 5d20: 815c6810 eefd8e00 81c35d44 81c35d38 8060dd80 8060dbec 81c35d6c 81c35d48 [ 4.210918] 5d40: 805e98a4 8060dd70 00000000 815c6810 810c45b0 81126e90 81126e90 80dd9a3c [ 4.219112] 5d60: 81c35d8c 81c35d70 80619574 805e9808 815c6810 00000000 810c45b0 81126e90 [ 4.227305] 5d80: 81c35db4 81c35d90 806168dc 80619514 80625df0 80623c80 815c6810 810c45b0 [ 4.235498] 5da0: 81c35e6c 815c6810 81c35dec 81c35db8 80616d04 80616800 81c35de4 81c35dc8 [ 4.243691] 5dc0: 808382b0 80b2f444 8116e310 8116e314 81c35e6c 815c6810 00000003 80dd9a3c [ 4.251884] 5de0: 81c35e14 81c35df0 80616ec8 80616c60 00000001 810c45b0 81c35e6c 815c6810 [ 4.260076] 5e00: 00000001 80dd9a3c 81c35e34 81c35e18 80617338 80616e90 00000000 81c35e6c [ 4.268269] 5e20: 80617284 81c34000 81c35e64 81c35e38 80614730 80617290 81c35e64 8171a06c [ 4.276461] 5e40: 81e220b8 7dbb550b 815c6810 81c34000 815c6854 81126e90 81c35e9c 81c35e68 [ 4.284654] 5e60: 8061673c 806146a8 8060f5e0 815c6810 00000001 7dbb550b 00000000 810c5080 [ 4.292847] 5e80: 810c5320 815c6810 81126e90 00000000 81c35eac 81c35ea0 80617554 80616650 [ 4.301040] 5ea0: 81c35ecc 81c35eb0 80615694 80617544 810c5080 810c5080 810c5094 81126e90 [ 4.309233] 5ec0: 81c35efc 81c35ed0 80615c6c 8061560c 80615bc0 810c50c0 817eeb00 81412800 [ 4.317425] 5ee0: 814c3000 00000000 814c300d 81119a60 81c35f3c 81c35f00 80141488 80615bcc [ 4.325618] 5f00: 81c60000 81c34000 81c35f24 81c35f18 80143078 817eeb00 81412800 817eeb18 [ 4.333811] 5f20: 81412818 81003d00 00000088 81412800 81c35f74 81c35f40 80141a48 80141298 [ 4.342005] 5f40: 81c35f74 81c34000 801481ac 817efa40 817efc00 801417d8 817eeb00 00000000 [ 4.350199] 5f60: 815a7e7c 81c34000 81c35fac 81c35f78 80149b1c 801417e4 817efc20 817efc20 [ 4.358391] 5f80: ffffe000 817efa40 801499a8 00000000 00000000 00000000 00000000 00000000 [ 4.366583] 5fa0: 00000000 81c35fb0 80100130 801499b4 00000000 00000000 00000000 00000000 [ 4.374774] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.382966] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 4.391155] Backtrace: [ 4.393613] [<805eadcc>] (stdp2690_get_edid) from [<805eb138>] (ge_b850v3_lvds_get_modes+0x2c/0x5c) [ 4.402691] r10:81c73840 r9:81c73894 r8:816d9800 r7:00001000 r6:824addc0 r5:81c73840 [ 4.410534] r4:810c35f0 [ 4.413073] [<805eb10c>] (ge_b850v3_lvds_get_modes) from [<80594188>] (drm_helper_probe_single_connector_modes+0x1d4/0x84c) [ 4.424240] r5:00000045 r4:810c35f0 [ 4.427822] [<80593fb4>] (drm_helper_probe_single_connector_modes) from [<805d9694>] (drm_client_modeset_probe+0x200/0x1384) [ 4.439074] r10:00000002 r9:00001000 r8:81e1ce40 r7:00001000 r6:826282c8 r5:826282c8 [ 4.446917] r4:00000008 [ 4.449455] [<805d9494>] (drm_client_modeset_probe) from [<805a7f18>] (__drm_fb_helper_initial_config_and_unlock+0x54/0x5b4) [ 4.460713] r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:00000010 [ 4.468556] r4:81fbb700 [ 4.471095] [<805a7ec4>] (__drm_fb_helper_initial_config_and_unlock) from [<805a8c78>] (drm_fbdev_client_hotplug+0x11c/0x1b0) [ 4.482434] r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:816d9800 [ 4.490276] r4:81fbb700 [ 4.492814] [<805a8b5c>] (drm_fbdev_client_hotplug) from [<805a8dc4>] (drm_fbdev_generic_setup+0xb8/0x1a4) [ 4.502494] r7:00000000 r6:00000010 r5:81fbb700 r4:816d9800 [ 4.508160] [<805a8d0c>] (drm_fbdev_generic_setup) from [<805e47b0>] (imx_drm_bind+0xf0/0x130) [ 4.516805] r7:810c42d0 r6:8179f810 r5:00000000 r4:816d9800 [ 4.522474] [<805e46c0>] (imx_drm_bind) from [<8060db1c>] (try_to_bring_up_master+0x22c/0x2f0) [ 4.531116] r7:81126b60 r6:81c40908 r5:81e1ea80 r4:824aa240 [ 4.536783] [<8060d8f0>] (try_to_bring_up_master) from [<8060dc9c>] (__component_add+0xbc/0x184) [ 4.545597] r10:815c6810 r9:80dd9a3c r8:80c4b95c r7:810c4d6c r6:00000000 r5:81e1ea80 [ 4.553440] r4:81fe9740 [ 4.555980] [<8060dbe0>] (__component_add) from [<8060dd80>] (component_add+0x1c/0x20) [ 4.563921] r7:eefd8e00 r6:815c6810 r5:815c6800 r4:8246b440 [ 4.569589] [<8060dd64>] (component_add) from [<805e98a4>] (dw_hdmi_imx_probe+0xa8/0xe8) [ 4.577702] [<805e97fc>] (dw_hdmi_imx_probe) from [<80619574>] (platform_probe+0x6c/0xc8) [ 4.585908] r9:80dd9a3c r8:81126e90 r7:81126e90 r6:810c45b0 r5:815c6810 r4:00000000 [ 4.593662] [<80619508>] (platform_probe) from [<806168dc>] (really_probe+0xe8/0x460) [ 4.601524] r7:81126e90 r6:810c45b0 r5:00000000 r4:815c6810 [ 4.607191] [<806167f4>] (really_probe) from [<80616d04>] (__driver_probe_device+0xb0/0x230) [ 4.615658] r7:815c6810 r6:81c35e6c r5:810c45b0 r4:815c6810 [ 4.621326] [<80616c54>] (__driver_probe_device) from [<80616ec8>] (driver_probe_device+0x44/0xe0) [ 4.630313] r9:80dd9a3c r8:00000003 r7:815c6810 r6:81c35e6c r5:8116e314 r4:8116e310 [ 4.638068] [<80616e84>] (driver_probe_device) from [<80617338>] (__device_attach_driver+0xb4/0x12c) [ 4.647227] r9:80dd9a3c r8:00000001 r7:815c6810 r6:81c35e6c r5:810c45b0 r4:00000001 [ 4.654981] [<80617284>] (__device_attach_driver) from [<80614730>] (bus_for_each_drv+0x94/0xd8) [ 4.663794] r7:81c34000 r6:80617284 r5:81c35e6c r4:00000000 [ 4.669461] [<8061469c>] (bus_for_each_drv) from [<8061673c>] (__device_attach+0xf8/0x190) [ 4.677753] r7:81126e90 r6:815c6854 r5:81c34000 r4:815c6810 [ 4.683419] [<80616644>] (__device_attach) from [<80617554>] (device_initial_probe+0x1c/0x20) [ 4.691971] r8:00000000 r7:81126e90 r6:815c6810 r5:810c5320 r4:810c5080 [ 4.698681] [<80617538>] (device_initial_probe) from [<80615694>] (bus_probe_device+0x94/0x9c) [ 4.707318] [<80615600>] (bus_probe_device) from [<80615c6c>] (deferred_probe_work_func+0xac/0xf0) [ 4.716305] r7:81126e90 r6:810c5094 r5:810c5080 r4:810c5080 [ 4.721973] [<80615bc0>] (deferred_probe_work_func) from [<80141488>] (process_one_work+0x1fc/0x54c) [ 4.731139] r10:81119a60 r9:814c300d r8:00000000 r7:814c3000 r6:81412800 r5:817eeb00 [ 4.738981] r4:810c50c0 r3:80615bc0 [ 4.742563] [<8014128c>] (process_one_work) from [<80141a48>] (worker_thread+0x270/0x570) [ 4.750765] r10:81412800 r9:00000088 r8:81003d00 r7:81412818 r6:817eeb18 r5:81412800 [ 4.758608] r4:817eeb00 [ 4.761147] [<801417d8>] (worker_thread) from [<80149b1c>] (kthread+0x174/0x190) [ 4.768574] r10:81c34000 r9:815a7e7c r8:00000000 r7:817eeb00 r6:801417d8 r5:817efc00 [ 4.776417] r4:817efa40 [ 4.778955] [<801499a8>] (kthread) from [<80100130>] (ret_from_fork+0x14/0x24) [ 4.786201] Exception stack(0x81c35fb0 to 0x81c35ff8) [ 4.791266] 5fa0: 00000000 00000000 00000000 00000000 [ 4.799459] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.807651] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 4.814279] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801499a8 [ 4.822120] r4:817efa40 [ 4.824664] Code: e3a02080 e593001c e3a01d33 e3a05000 (e5979018) Split the registration from the STDP4028 probe routine and only perform registration once both the STDP4028 and STDP2690 have probed. Signed-off-by:
Martyn Welch <martyn.welch@collabora.com> CC: Peter Senna Tschudin <peter.senna@gmail.com> CC: Martyn Welch <martyn.welch@collabora.co.uk> CC: Neil Armstrong <narmstrong@baylibre.com> CC: Robert Foss <robert.foss@linaro.org> CC: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> CC: Jonas Karlman <jonas@kwiboo.se> CC: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Dan Carpenter authored
This code accidentally returns IS_ERR(), which is 1, instead of propagating the negative error code. The caller doesn't check for errors so it doesn't affect run time at all. Fixes: 566fef12 ("drm/bridge: anx7625: add HDMI audio function") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Tzung-Bi Shih <tzungbi@google.com> Signed-off-by:
-
- 24 Nov, 2021 1 commit
-
-
Hsin-Yi Wang authored
edid_read() was assumed to return 0 on success. After commit 7f16d0f3("drm/bridge: anx7625: Propagate errors from sp_tx_rst_aux()"), the function will return > 0 for successful case, representing the i2c read bytes. Otherwise -EIO on failure cases. Update the g_edid_break break condition accordingly. Fixes: 7f16d0f3("drm/bridge: anx7625: Propagate errors from sp_tx_rst_aux()") Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
Xin Ji <xji@analogixsemi.com> Signed-off-by:
-
- 22 Nov, 2021 2 commits
-
-
Randy Dunlap authored
Fix kernel-doc warnings in ttm_range_manager.c: drivers/gpu/drm/ttm/ttm_range_manager.c:144: warning: expecting prototype for ttm_range_man_init(). Prototype was for ttm_range_man_init_nocheck() instead drivers/gpu/drm/ttm/ttm_range_manager.c:178: warning: expecting prototype for ttm_range_man_fini(). Prototype was for ttm_range_man_fini_nocheck() instead Also fix subsequent warnings from scripts/kernel-doc. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
-
Christian König authored
Partially revert commit 5f319c5c. First of all this is illegal use of RCU to call dma_fence_enable_sw_signaling() since we don't hold a reference to the fence in question and can crash badly. Then the code doesn't seem to have the intended effect since only the exclusive fence is handled, but the KFD fences are always added as shared fence. Only keep the handling to throw away the content of SVM BOs. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com>
-
- 18 Nov, 2021 3 commits
-
-
Dan Carpenter authored
The devm_gen_pool_create() function never returns NULL, it returns error pointers. Fixes: 4cc9b565 ("drm/vboxvideo: Use devm_gen_pool_create") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
The Lenovo Yoga Book X91F/L uses a panel which has been mounted 90 degrees rotated. Add a quirk for this. Cc: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by:
Simon Ser <contact@emersion.fr> Tested-by:
Yauhen Kharuzhy <jekhor@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211106130227.11927-1-hdegoede@redhat.com
-
Thomas Zimmermann authored
Backmerging from drm/drm-next for v5.16-rc1. Signed-off-by:
-
- 17 Nov, 2021 6 commits
-
-
Lyude Paul authored
Hooray! We've managed to hit enough bugs upstream that I've been able to come up with a pretty solid explanation for how backlight controls are actually supposed to be detected and used these days. As well, having the rest of the PWM bits in VESA's backlight interface implemented seems to have fixed all of the problematic brightness controls laptop panels that we've hit so far. So, let's actually document this instead of just calling the laptop panels liars. As well, I would like to formally apologize to all of the laptop panels I called liars. I'm sorry laptop panels, hopefully you can all forgive me and we can move past this~ Signed-off-by:
Lyude Paul <lyude@redhat.com> Acked-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-6-lyude@redhat.com
-
Lyude Paul authored
Now that we've added support to i915 for controlling panel backlights that need PWM to be enabled/disabled, let's finalize this and add support for controlling brightness levels via PWM as well. This should hopefully put us towards the path of supporting _ALL_ backlights via VESA's DPCD interface which would allow us to finally start trusting the DPCD again. Note however that we still don't enable using this by default on i915 when it's not needed, primarily because I haven't yet had a chance to confirm if it's safe to do this on the one machine in Intel's CI that had an issue with this: samus-fi-bdw. I have done basic testing of this on other machines though, by manually patching i915 to force it into PWM-only mode on some of my laptops. v2: * Correct documentation (thanks Doug!) * Get rid of backlight caps Signed-off-by:
Doug Anderson <dianders@chromium.org> Cc: Rajeev Nandan <rajeevny@codeaurora.org> Cc: Satadru Pramanik <satadru@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-5-lyude@redhat.com
-
Lyude Paul authored
As it turns out, apparently some machines will actually leave additional backlight functionality like dynamic backlight control on before the OS loads. Currently we don't take care to disable unsupported features when writing back the backlight mode, which can lead to some rather strange looking behavior when adjusting the backlight. So, let's fix this by just not reading back the current backlight mode on initial enable. I don't think there should really be any downsides to this, and this will ensure we don't leave any unsupported functionality enabled. This should fix at least one (but not all) of the issues seen with DPCD backlight support on fi-bdw-samus v5: * Just avoid reading back DPCD register - Doug Anderson Signed-off-by:
-
Lyude Paul authored
Since we don't support hybrid AUX/PWM backlights in nouveau right now, let's add some explicit checks so that we don't break nouveau once we enable support for these backlights in other drivers. Reviewed-by:
Karol Herbst <kherbst@redhat.com> Signed-off-by:
-
Lyude Paul authored
This simply adds proper support for panel backlights that can be controlled via VESA's backlight control protocol, but which also require that we enable and disable the backlight via PWM instead of via the DPCD interface. We also enable this by default, in order to fix some people's backlights that were broken by not having this enabled. For reference, backlights that require this and use VESA's backlight interface tend to be laptops with hybrid GPUs, but this very well may change in the future. v4: * Make sure that we call intel_backlight_level_to_pwm() in intel_dp_aux_vesa_enable_backlight() - vsyrjala Signed-off-by:
-
Kieran Bingham authored
The edp_panel_entry members 'delay' and 'name' are documented, but without the correct syntax for kernel doc. This generates the following warnings: drivers/gpu/drm/panel/panel-edp.c:204: warning: Function parameter or member 'delay' not described in 'edp_panel_entry' drivers/gpu/drm/panel/panel-edp.c:204: warning: Function parameter or member 'name' not described in 'edp_panel_entry' Fix them accordingly. Fixes: 5540cf8f ("drm/panel-edp: Implement generic "edp-panel"s probed by EDID") Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
