- 12 May, 2015 5 commits
-
-
Matt Fleming authored
commit 0c5ed61a upstream. Not only can EfiResetSystem() be used to reboot, it can also be used to power down machines. By and large, this functionality doesn't work very well across the range of EFI machines in the wild, so it should definitely only be used as a last resort. In an ideal world, this wouldn't be needed at all. Unfortunately, we're starting to see machines where EFI is the *only* reliable way to power down, and nothing else, not PCI, not ACPI, works. efi_poweroff_required() should be implemented on a per-architecture basis, since exactly when we should be using EFI runtime services is a platform-specific decision. There's no analogue for reboot because each architecture handles reboot very differently - the x86 code in particular is pretty complex. Patches to enable this for specific classes of hardware will be submitted separately. Tested-by:
Mark Salter <msalter@redhat.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Matt Fleming authored
commit 8562c99c upstream. Implement efi_reboot(), which is really just a wrapper around the EfiResetSystem() EFI runtime service, but it does at least allow us to funnel all callers through a single location. It also simplifies the callsites since users no longer need to check to see whether EFI_RUNTIME_SERVICES are enabled. Cc: Tony Luck <tony.luck@intel.com> Tested-by:
-
Ido Shamay authored
commit 07841f9d upstream. When system is out of memory, refilling of RX buffers fails while the driver continue to pass the received packets to the kernel stack. At some point, when all RX buffers deplete, driver may fall into a sleep, and not recover when memory for new RX buffers is once again availible. This is because hardware does not have valid descriptors, so no interrupt will be generated for the driver to return to work in napi context. Fix it by schedule the napi poll function from stats_task delayed workqueue, as long as the allocations fail. Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Benjamin Poirier authored
commit 42eab005 upstream. By default, the number of tx queues is limited by the number of online cpus in mlx4_en_get_profile(). However, this limit no longer holds after the ethtool .set_channels method has been called. In that situation, the driver may access invalid bits of certain cpumask variables when queue_index >= nr_cpu_ids. Signed-off-by:
Benjamin Poirier <bpoirier@suse.de> Acked-by:
-
Luis Henriques authored
Signed-off-by:
-
- 06 May, 2015 35 commits
-
-
David S. Miller authored
commit a134f083 upstream. If we don't do that, then the poison value is left in the ->pprev backlink. This can cause crashes if we do a disconnect, followed by a connect(). Tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Reported-by:
Wen Xu <hotdog3645@gmail.com> Signed-off-by:
-
Lukas Czerner authored
commit 0f2af21a upstream. Currently there is a bug in zero range code which causes zero range calls to only allocate block aligned portion of the range, while ignoring the rest in some cases. In some cases, namely if the end of the range is past i_size, we do attempt to preallocate the last nonaligned block. However this might cause kernel to BUG() in some carefully designed zero range requests on setups where page size > block size. Fix this problem by first preallocating the entire range, including the nonaligned edges and converting the written extents to unwritten in the next step. This approach will also give us the advantage of having the range to be as linearly contiguous as possible. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: Moritz Muehlenhoff <jmm@debian.org> Signed-off-by:
-
Theodore Ts'o authored
commit 713e8dde upstream. We accidently aliased EXT4_EX_NOCACHE and EXT4_GET_CONVERT_UNWRITTEN falgs, which apparently was hiding a bug that was unmasked when this flag aliasing issue was addressed (see the subsequent commit). The reproduction case was: fsx -N 10000 -l 500000 -r 4096 -t 4096 -w 4096 -Z -R -W /vdb/junk ... which would cause fsx to report corruption in the data file. The fix we have is a bit of an overkill, but I'd much rather be conservative for now, and we can optimize ZERO_RANGE_FL handling later. The fact that we need to zap the extent_status cache for the inode is unfortunate, but correctness is far more important than performance. Signed-off-by:
-
Theodore Ts'o authored
commit bd30d702 upstream. Commit b8a86845 introduced an accidental flag aliasing between EXT4_EX_NOCACHE and EXT4_GET_BLOCKS_CONVERT_UNWRITTEN. Fortunately, this didn't introduce any untorward side effects --- we got lucky. Nevertheless, fix this and leave a warning to hopefully avoid this from happening in the future. Signed-off-by:
-
Rainer Koenig authored
commit 47c1ffb2 upstream. Add two more Fujitsu LIFEBOOK models that also ship with the Elantech touchpad and don't work with crc_disabled to the quirk list. Signed-off-by:
Rainer Koenig <Rainer.Koenig@ts.fujitsu.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Ulrik De Bie authored
commit 0dc15879 upstream. The Fujitsu H730 does not work with crc_enabled = 0, even though the crc_enabled bit in the firmware version indicated it would. When switching this value to crc_enabled to 1, the touchpad works. This patch uses DMI to detect H730. Reported-by:
Stefan Valouch <stefan@valouch.com> Tested-by:
Alfredo Gemma <alfredo.gemma@gmail.com> Signed-off-by:
Ulrik De Bie <ulrik.debie-os@e2big.org> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
NeilBrown authored
commit c42bfd7f upstream. This button is treated as a wakeup source, so we need to initialise it correctly. Without the device_init_wakeup() call, dev->power.wakeup will be NULL, and pm_wakeup_event() will do nothing. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Ethan Zhao authored
commit cb57720b upstream. If ACPI _PPC changed notification happens before governor was initiated while kernel is booting, a NULL pointer dereference will be triggered: BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: [<ffffffff81470453>] __cpufreq_governor+0x23/0x1e0 PGD 0 Oops: 0000 [#1] SMP ... ... RIP: 0010:[<ffffffff81470453>] [<ffffffff81470453>] __cpufreq_governor+0x23/0x1e0 RSP: 0018:ffff881fcfbcfbb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff881fd11b3980 RCX: ffff88407fc20000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff881fd11b3980 RBP: ffff881fcfbcfbd8 R08: 0000000000000000 R09: 000000000000000f R10: ffffffff818068d0 R11: 0000000000000043 R12: 0000000000000004 R13: 0000000000000000 R14: ffffffff8196cae0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff881fffc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 00000000018ae000 CR4: 00000000000407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/0:3 (pid: 750, threadinfo ffff881fcfbce000, task ffff881fcf556400) Stack: ffff881fffc17d00 ffff881fcfbcfc18 ffff881fd11b3980 0000000000000000 ffff881fcfbcfc08 ffffffff81470d08 ffff881fd11b3980 0000000000000007 ffff881fcfbcfc18 ffff881fffc17d00 ffff881fcfbcfd28 ffffffff81472e9a Call Trace: [<ffffffff81470d08>] __cpufreq_set_policy+0x1b8/0x2e0 [<ffffffff81472e9a>] cpufreq_update_policy+0xca/0x150 [<ffffffff81472f20>] ? cpufreq_update_policy+0x150/0x150 [<ffffffff81324a96>] acpi_processor_ppc_has_changed+0x71/0x7b [<ffffffff81320bcd>] acpi_processor_notify+0x55/0x115 [<ffffffff812f9c29>] acpi_device_notify+0x19/0x1b [<ffffffff813084ca>] acpi_ev_notify_dispatch+0x41/0x5f [<ffffffff812f64a4>] acpi_os_execute_deferred+0x27/0x34 The root cause is a race conditon -- cpufreq core and acpi-cpufreq driver were initiated, but cpufreq_governor wasn't and _PPC changed notification happened, __cpufreq_governor() was called within acpi_os_execute_deferred kernel thread context. To fix this panic issue, add pointer checking code in __cpufreq_governor() before pointer policy->governor is to be dereferenced. Signed-off-by:
Ethan Zhao <ethan.zhao@oracle.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Thomas D authored
commit f82263c6 upstream. Since commit ee0778a3 ("tools/power: turbostat: make Makefile a bit more capable") turbostat's Makefile is using [...] BUILD_OUTPUT := $(PWD) [...] which obviously causes trouble when building "turbostat" with make -C /usr/src/linux/tools/power/x86/turbostat ARCH=x86 turbostat because GNU make does not update nor guarantee that $PWD is set. This patch changes the Makefile to use $CURDIR instead, which GNU make guarantees to set and update (i.e. when using "make -C ...") and also adds support for the O= option (see "make help" in your root of your kernel source tree for more details). Link: https://bugs.gentoo.org/show_bug.cgi?id=533918 Fixes: ee0778a3 ("tools/power: turbostat: make Makefile a bit more capable") Signed-off-by:
Thomas D. <whissi@whissi.de> Cc: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Dan Carpenter authored
commit 13f6b191 upstream. Using the indenting we can see the curly braces were obviously intended. This is a static checker fix, but my guess is that we don't read enough bytes, because we don't calculate "t_len" correctly. Fixes: f1d82698 ('memstick: use fully asynchronous request processing') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Nicolas Iooss authored
commit d43698e8 upstream. Commit 2473238e ("ihex: add support for CS:IP/EIP records") removes the "default:" statement in the switch block, making the "return usage();" line dead code and ihex2fw silently ignoring unknown options. Restore this statement. This bug was found by building with HOSTCC=clang and adding -Wunreachable-code-return to HOSTCFLAGS. Fixes: 2473238e ("ihex: add support for CS:IP/EIP records") Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Herbert Xu authored
commit 213dd74a upstream. On Wed, Apr 15, 2015 at 05:41:26PM +0200, Nicolas Dichtel wrote: > Le 15/04/2015 15:57, Herbert Xu a écrit : > >On Wed, Apr 15, 2015 at 06:22:29PM +0800, Herbert Xu wrote: > [snip] > >Subject: skbuff: Do not scrub skb mark within the same name space > > > >The commit ea23192e ("tunnels: > Maybe add a Fixes tag? > Fixes: ea23192e ("tunnels: harmonize cleanup done on skb on rx path") > > >harmonize cleanup done on skb on rx path") broke anyone trying to > >use netfilter marking across IPv4 tunnels. While most of the > >fields that are cleared by skb_scrub_packet don't matter, the > >netfilter mark must be preserved. > > > >This patch rearranges skb_scurb_packet to preserve the mark field. > nit: s/scurb/scrub > > Else it's fine for me. Sure. PS I used the wrong email for James the first time around. So let me repeat the question here. Should secmark be preserved or cleared across tunnels within the same name space? In fact, do our security models even support name spaces? ---8<--- The commit ea23192e ("tunnels: harmonize cleanup done on skb on rx path") broke anyone trying to use netfilter marking across IPv4 tunnels. While most of the fields that are cleared by skb_scrub_packet don't matter, the netfilter mark must be preserved. This patch rearranges skb_scrub_packet to preserve the mark field. Fixes: ea23192e ("tunnels: harmonize cleanup done on skb on rx path") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Honggang LI authored
commit 59d2d18c upstream. If CONFIG_ARCH_DMA_ADDR_T_64BIT enabled for x86 systems and physical memory is more than 4GB, dma_map_page may return a valid memory address which greater than 0xffffffff. As a result, the mlx5 device page allocator RB tree will be initialized with valid addresses greater than 0xfffffff. However, (addr & PAGE_MASK) set the high four bytes to zeros. So, it's impossible for the function, free_4k, to release the pages whose addresses greater than 4GB. Memory leaks. And mlx5_ib module can't release the pages when user try to remove the module, as a result, system hang. [root@rdma05 root]# dmesg | grep addr | head addr = 3fe384000 addr & PAGE_MASK = fe384000 [root@rdma05 root]# rmmod mlx5_ib <---- hang on ---------------------- cosnole log ----------------- mlx5_ib 0000:04:00.0: irq 138 for MSI/MSI-X alloc irq_desc for 139 on node -1 alloc kstat_irqs on node -1 mlx5_ib 0000:04:00.0: irq 139 for MSI/MSI-X 0000:04:00.0:free_4k:221:(pid 1519): page not found 0000:04:00.0:free_4k:221:(pid 1519): page not found 0000:04:00.0:free_4k:221:(pid 1519): page not found 0000:04:00.0:free_4k:221:(pid 1519): page not found ---------------------- cosnole log ----------------- Fixes: bf0bf77f ('mlx5: Support communicating arbitrary host page size to firmware') Signed-off-by:
Honggang Li <honli@redhat.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Sagi Grimberg authored
commit a065fe6a upstream. This length miss-calculation may cause a silent data corruption in the DIX case and cause the device to reference unmapped area. Fixes: d77e6535 ('libiscsi, iser: Adjust data_length to include protection information') Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Erez Shitrit authored
commit ca9b590c upstream. The current code decreases from the mss size (which is the gso_size from the kernel skb) the size of the packet headers. It shouldn't do that because the mss that comes from the stack (e.g IPoIB) includes only the tcp payload without the headers. The result is indication to the HW that each packet that the HW sends is smaller than what it could be, and too many packets will be sent for big messages. An easy way to demonstrate one more aspect of the problem is by configuring the ipoib mtu to be less than 2*hlen (2*56) and then run app sending big TCP messages. This will tell the HW to send packets with giant (negative value which under unsigned arithmetics becomes a huge positive one) length and the QP moves to SQE state. Fixes: b832be1e ('IB/mlx4: Add IPoIB LSO support') Reported-by:
Matthew Finlay <matt@mellanox.com> Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Mark Brown authored
commit c1c21f4e upstream. Current -next fails to link an ARM allmodconfig because drivers that use the core recovery functions can be built as modules but those functions are not exported: ERROR: "i2c_generic_gpio_recovery" [drivers/i2c/busses/i2c-davinci.ko] undefined! ERROR: "i2c_generic_scl_recovery" [drivers/i2c/busses/i2c-davinci.ko] undefined! ERROR: "i2c_recover_bus" [drivers/i2c/busses/i2c-davinci.ko] undefined! Add exports to fix this. Fixes: 5f9296ba (i2c: Add bus recovery infrastructure) Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Dave Olson authored
commit f7e9e358 upstream. This problem appears to have been introduced in 2.6.29 by commit 93197a36 "Rewrite sysfs processor cache info code". This caused lscpu to error out on at least e500v2 devices, eg: error: cannot open /sys/devices/system/cpu/cpu0/cache/index2/size: No such file or directory Some embedded powerpc systems use cache-size in DTS for the unified L2 cache size, not d-cache-size, so we need to allow for both DTS names. Added a new CACHE_TYPE_UNIFIED_D cache_type_info structure to handle this. Fixes: 93197a36 ("powerpc: Rewrite sysfs processor cache info code") Signed-off-by:
Dave Olson <olson@cumulusnetworks.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Radim Krčmář authored
commit ca3f0874 upstream. kvm_write_guest_cached() does not mark all written pages as dirty and code comments in kvm_gfn_to_hva_cache_init() talk about NULL memslot with cross page accesses. Fix all the easy way. The check is '<= 1' to have the same result for 'len = 0' cache anywhere in the page. (nr_pages_needed is 0 on page boundary.) Fixes: 8f964525 ("KVM: Allow cross page reads and writes from cached translations.") Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Message-Id: <20150408121648.GA3519@potion.brq.redhat.com> Reviewed-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Michael Ellerman authored
commit 7261b956 upstream. The patch to add it_page_shift incorrectly changed the increment of uaddr to use it_page_shift, rather then (1 << it_page_shift). This broke booting on at least some Cell blades, as the iommu was basically non-functional. Fixes: 3a553170 ("powerpc/iommu: Add it_page_shift field to determine iommu page size") Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Yao Xiwei authored
commit 092a29a4 upstream. When the kernel deleted a vti6 interface, this interface was not removed from the tunnels list. Thus, when the ip6_vti module was removed, this old interface was found and the kernel tried to delete it again. This was leading to a kernel panic. Fixes: 61220ab3 ("vti6: Enable namespace changing") Signed-off-by:
Yao Xiwei <xiwei.yao@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Alexander Duyck authored
commit 2e7056c4 upstream. Looking over the implementation for jhash2 and comparing it to jhash_3words I realized that the two hashes were in fact very different. Doing a bit of digging led me to "The new jhash implementation" in which lookup2 was supposed to have been replaced with lookup3. In reviewing the patch I noticed that jhash2 had originally initialized a and b to JHASH_GOLDENRATIO and c to initval, but after the patch a, b, and c were initialized to initval + (length << 2) + JHASH_INITVAL. However the changes in jhash_3words simply replaced the initialization of a and b with JHASH_INITVAL. This change corrects what I believe was an oversight so that a, b, and c in jhash_3words all have the same value added consisting of initval + (length << 2) + JHASH_INITVAL so that jhash2 and jhash_3words will now produce the same hash result given the same inputs. Fixes: 60d509c8 ("The new jhash implementation") Signed-off-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
-
Russell King authored
commit 767bf7e7 upstream. Normally, when a CPU wants to clear a cache line to zero in the external L2 cache, it would generate bus cycles to write each word as it would do with any other data access. However, a Cortex A9 connected to a L2C-310 has a specific feature where the CPU can detect this operation, and signal that it wants to zero an entire cache line. This feature, known as Full Line of Zeros (FLZ), involves a non-standard AXI signalling mechanism which only the L2C-310 can properly interpret. There are separate enable bits in both the L2C-310 and the Cortex A9 - the L2C-310 needs to be enabled and have the FLZ enable bit set in the auxiliary control register before the Cortex A9 has this feature enabled. Unfortunately, the suspend code was not respecting this - it's not obvious from the code: swsusp_arch_suspend() cpu_suspend() /* saves the Cortex A9 auxiliary control register */ arch_save_image() soft_restart() /* turns off FLZ in Cortex A9, and disables L2C */ cpu_resume() /* restores the Cortex A9 registers, inc auxcr */ At this point, we end up with the L2C disabled, but the Cortex A9 with FLZ enabled - which means any memset() or zeroing of a full cache line will fail to take effect. A similar issue exists in the resume path, but it's slightly more complex: swsusp_arch_suspend() cpu_suspend() /* saves the Cortex A9 auxiliary control register */ arch_save_image() /* image with A9 auxcr saved */ ... swsusp_arch_resume() call_with_stack() arch_restore_image() /* restores image with A9 auxcr saved above */ soft_restart() /* turns off FLZ in Cortex A9, and disables L2C */ cpu_resume() /* restores the Cortex A9 registers, inc auxcr */ Again, here we end up with the L2C disabled, but Cortex A9 FLZ enabled. There's no need to turn off the L2C in either of these two paths; there are benefits from not doing so - for example, the page copies will be faster with the L2C enabled. Hence, fix this by providing a variant of soft_restart() which can be used without turning the L2 cache controller off, and use it in both of these paths to keep the L2C enabled across the respective resume transitions. Fixes: 8ef418c7 ("ARM: l2c: trial at enabling some Cortex-A9 optimisations") Reported-by:
Sean Cross <xobs@kosagi.com> Tested-by:
Russell King <rmk+kernel@arm.linux.org.uk> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Vutla, Lokesh authored
commit 6d7e7e02 upstream. For cases where total length of an input SGs is not same as length of the input data for encryption, omap-aes driver crashes. This happens in the case when IPsec is trying to use omap-aes driver. To avoid this, we copy all the pages from the input SG list into a contiguous buffer and prepare a single element SG list for this buffer with length as the total bytes to crypt, which is similar thing that is done in case of unaligned lengths. Fixes: 6242332f ("crypto: omap-aes - Add support for cases of unaligned lengths") Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
-
Chuck Lever authored
commit 41f97028 upstream. If a provider advertizes a zero max_fast_reg_page_list_len, FRWR depth detection loops forever. Instead of just failing the mount, try other memory registration modes. Fixes: 0fc6c4e7 ("xprtrdma: mind the device's max fast . . .") Reported-by:
Devesh Sharma <Devesh.Sharma@Emulex.Com> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Tested-by:
Meghana Cheripady <Meghana.Cheripady@Emulex.Com> Tested-by:
Veeresh U. Kokatnur <veereshuk@chelsio.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> [ luis: backported to 3.16: - devattr struct isn't a pointer ] Signed-off-by:
-
Nishanth Menon authored
commit f4831605 upstream. time_init invokes timer64_init (which is __init annotation) since all of these are invoked at init time, lets maintain consistency by ensuring time_init is marked appropriately as well. This fixes the following warning with CONFIG_DEBUG_SECTION_MISMATCH=y WARNING: vmlinux.o(.text+0x3bfc): Section mismatch in reference from the function time_init() to the function .init.text:timer64_init() The function time_init() references the function __init timer64_init(). This is often because time_init lacks a __init annotation or the annotation of timer64_init is wrong. Fixes: 546a3954 ("C6X: time management") Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
-
Junjie Mao authored
commit 1c34203a upstream. It is not necessary to call device_remove_groups() when device_add_groups() fails. The group added by device_add_groups() should be removed if sysfs_create_link() fails. Fixes: fa6fdb33 ("driver core: bus_type: add dev_groups") Signed-off-by:
Junjie Mao <junjie_mao@yeah.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mark Rutland authored
commit 91d57155 upstream. After writing the page tables, we use __inval_cache_range to invalidate any stale cache entries. Strongly Ordered memory accesses are not ordered w.r.t. cache maintenance instructions, and hence explicit memory barriers are required to provide this ordering. However, __inval_cache_range was written to be used on Normal Cacheable memory once the MMU and caches are on, and does not have any barriers prior to the DC instructions. This patch adds a DMB between the page tables being written and the corresponding cachelines being invalidated, ensuring that the invalidation makes the new data visible to subsequent cacheable accesses. A barrier is not required before the prior invalidate as we do not access the page table memory area prior to this, and earlier barriers in preserve_boot_args and set_cpu_boot_mode_flag ensures ordering w.r.t. any stores performed prior to entering Linux. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Fixes: c218bca7 ("arm64: Relax the kernel cache requirements for boot") Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Archit Taneja authored
commit 0b21503d upstream. Currently, a RCG's M/N counter (used for fraction division) is set to either 'bypass' (counter disabled) or 'dual edge' (counter enabled) based on whether the corresponding rcg struct has a mnd field specified and a non-zero N. In the case where M and N are the same value, the M/N counter is still enabled by code even though no division takes place. Leaving the RCG in such a state can result in improper behavior. This was observed with the DSI pixel clock RCG when M and N were both set to 1. Add an additional check (M != N) to enable the M/N counter only when it's needed for fraction division. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Fixes: bcd61c0f (clk: qcom: Add support for root clock generators (RCGs)) Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
mancha security authored
commit 0b053c95 upstream. OPTIMIZER_HIDE_VAR(), as defined when using gcc, is insufficient to ensure protection from dead store optimization. For the random driver and crypto drivers, calls are emitted ... $ gdb vmlinux (gdb) disassemble memzero_explicit Dump of assembler code for function memzero_explicit: 0xffffffff813a18b0 <+0>: push %rbp 0xffffffff813a18b1 <+1>: mov %rsi,%rdx 0xffffffff813a18b4 <+4>: xor %esi,%esi 0xffffffff813a18b6 <+6>: mov %rsp,%rbp 0xffffffff813a18b9 <+9>: callq 0xffffffff813a7120 <memset> 0xffffffff813a18be <+14>: pop %rbp 0xffffffff813a18bf <+15>: retq End of assembler dump. (gdb) disassemble extract_entropy [...] 0xffffffff814a5009 <+313>: mov %r12,%rdi 0xffffffff814a500c <+316>: mov $0xa,%esi 0xffffffff814a5011 <+321>: callq 0xffffffff813a18b0 <memzero_explicit> 0xffffffff814a5016 <+326>: mov -0x48(%rbp),%rax [...] ... but in case in future we might use facilities such as LTO, then OPTIMIZER_HIDE_VAR() is not sufficient to protect gcc from a possible eviction of the memset(). We have to use a compiler barrier instead. Minimal test example when we assume memzero_explicit() would *not* be a call, but would have been *inlined* instead: static inline void memzero_explicit(void *s, size_t count) { memset(s, 0, count); <foo> } int main(void) { char buff[20]; snprintf(buff, sizeof(buff) - 1, "test"); printf("%s", buff); memzero_explicit(buff, sizeof(buff)); return 0; } With <foo> := OPTIMIZER_HIDE_VAR(): (gdb) disassemble main Dump of assembler code for function main: [...] 0x0000000000400464 <+36>: callq 0x400410 <printf@plt> 0x0000000000400469 <+41>: xor %eax,%eax 0x000000000040046b <+43>: add $0x28,%rsp 0x000000000040046f <+47>: retq End of assembler dump. With <foo> := barrier(): (gdb) disassemble main Dump of assembler code for function main: [...] 0x0000000000400464 <+36>: callq 0x400410 <printf@plt> 0x0000000000400469 <+41>: movq $0x0,(%rsp) 0x0000000000400471 <+49>: movq $0x0,0x8(%rsp) 0x000000000040047a <+58>: movl $0x0,0x10(%rsp) 0x0000000000400482 <+66>: xor %eax,%eax 0x0000000000400484 <+68>: add $0x28,%rsp 0x0000000000400488 <+72>: retq End of assembler dump. As can be seen, movq, movq, movl are being emitted inlined via memset(). Reference: http://thread.gmane.org/gmane.linux.kernel.cryptoapi/13764/ Fixes: d4c5efdb ("random: add and use memzero_explicit() for clearing data") Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
mancha security <mancha1@zoho.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Bruno Prémont authored
commit 4eebd5a4 upstream. As GMUX depends on IO for iGP to be enabled and active, lock the IO at vgaarb level. This should prevent GPU driver for dGPU to disable IO for iGP while it tries to own legacy VGA IO. This fixes usage of backlight control combined with closed nvidia driver on some Apple dual-GPU (intel/nvidia) systems. On those systems loading nvidia driver disables intel IO decoding, disabling the gmux backlight controls as a side effect. Prior to commits moving boot_vga from (optional) efifb to less optional vgaarb this mis-behavior could be avoided by using right kernel config (efifb enabled but vgaarb disabled). This patch explicitly does not try to trigger vgaarb changes in order to avoid confusing already running graphics drivers. If IO has been mis-configured by vgaarb gmux will thus fail to probe. It is expected to load/probe gmux prior to graphics drivers. Fixes: ce027dac # nvidia interaction Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=86121Reported-by:
Petri Hodju <petrihodju@yahoo.com> Tested-by:
Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Simon Horman authored
commit ee72f6ad upstream. Set the SYSCIER as per the values indicated in the documentation. The value previously used appears to been copied from the r8a7779 implementation but on closer inspection is not correct for the r8a7790. Fixes: a48f1655 ("ARM: shmobile: r8a7790 SYSC setup code") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Nicolas Iooss authored
commit a3fa71c4 upstream. In struct wl18xx_acx_rx_rate_stat, rx_frames_per_rates field is an array, not a number. This means WL18XX_DEBUGFS_FWSTATS_FILE can't be used to display this field in debugfs (it would display a pointer, not the actual data). Use WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY instead. This bug has been found by adding a __printf attribute to wl1271_format_buffer. gcc complained about "format '%u' expects argument of type 'unsigned int', but argument 5 has type 'u32 *'". Fixes: c5d94169 ("wl18xx: use new fw stats structures") Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Sabrina Dubroca authored
commit 08e83316 upstream. There is a race condition between e1000_change_mtu's cleanups and netpoll, when we change the MTU across jumbo size: Changing MTU frees all the rx buffers: e1000_change_mtu -> e1000_down -> e1000_clean_all_rx_rings -> e1000_clean_rx_ring Then, close to the end of e1000_change_mtu: pr_info -> ... -> netpoll_poll_dev -> e1000_clean -> e1000_clean_rx_irq -> e1000_alloc_rx_buffers -> e1000_alloc_frag And when we come back to do the rest of the MTU change: e1000_up -> e1000_configure -> e1000_configure_rx -> e1000_alloc_jumbo_rx_buffers alloc_jumbo finds the buffers already != NULL, since data (shared with page in e1000_rx_buffer->rxbuf) has been re-alloc'd, but it's garbage, or at least not what is expected when in jumbo state. This results in an unusable adapter (packets don't get through), and a NULL pointer dereference on the next call to e1000_clean_rx_ring (other mtu change, link down, shutdown): BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81194d6e>] put_compound_page+0x7e/0x330 [...] Call Trace: [<ffffffff81195445>] put_page+0x55/0x60 [<ffffffff815d9f44>] e1000_clean_rx_ring+0x134/0x200 [<ffffffff815da055>] e1000_clean_all_rx_rings+0x45/0x60 [<ffffffff815df5e0>] e1000_down+0x1c0/0x1d0 [<ffffffff811e2260>] ? deactivate_slab+0x7f0/0x840 [<ffffffff815e21bc>] e1000_change_mtu+0xdc/0x170 [<ffffffff81647050>] dev_set_mtu+0xa0/0x140 [<ffffffff81664218>] do_setlink+0x218/0xac0 [<ffffffff814459e9>] ? nla_parse+0xb9/0x120 [<ffffffff816652d0>] rtnl_newlink+0x6d0/0x890 [<ffffffff8104f000>] ? kvm_clock_read+0x20/0x40 [<ffffffff810a2068>] ? sched_clock_cpu+0xa8/0x100 [<ffffffff81663802>] rtnetlink_rcv_msg+0x92/0x260 By setting the allocator to a dummy version, netpoll can't mess up our rx buffers. The allocator is set back to a sane value in e1000_configure_rx. Fixes: edbbb3ca ("e1000: implement jumbo receive with partial descriptors") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit a5ed1ad0 upstream. The "sdc" node is missing the ranges property, it needs to be treated as having an empty one otherwise translation fails for its children. Fixes 746c9e9f, "of/base: Fix PowerPC address parsing hack" Tested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Grant Likely <grant.likely@linaro.org> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Al Viro authored
commit 3cab989a upstream. Calling unlazy_walk() in walk_component() and do_last() when we find a symlink that needs to be followed doesn't acquire a reference to vfsmount. That's fine when the symlink is on the same vfsmount as the parent directory (which is almost always the case), but it's not always true - one _can_ manage to bind a symlink on top of something. And in such cases we end up with excessive mntput(). Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
