- 11 Dec, 2023 23 commits
-
-
AngeloGioacchino Del Regno authored
The `freq` variable is of type unsigned long and, even though it does currently work with u32 because no frequency is higher than U32_MAX, it is not guaranteed that in the future we will see one. Initialize the freq variable with ULONG_MAX instead of U32_MAX. Link: https://lore.kernel.org/r/20231121125044.78642-18-angelogioacchino.delregno@collabora.comSigned-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
AngeloGioacchino Del Regno authored
The svs_init01() and svs_init02() functions are already checking if the INIT01 and INIT02 modes are available - but that's done in for loops and for each SVS bank. Give those a shortcut to get out early if no SVS bank features the desired init mode: this is especially done to avoid some locking in the svs_init01(), but also to avoid multiple for loops to check the same, when no bank supports a specific mode. Link: https://lore.kernel.org/r/20231121125044.78642-17-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
Cleanup the svs_probe() function: use dev_err_probe() where possible, change some efuse read failure gotos and then remove now impossible IS_ERR_OR_NULL() checks (as they will never return true) for nvmem (efuse read) failures. Also remove some unnecessary blank lines. Link: https://lore.kernel.org/r/20231121125044.78642-16-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
Compress each entry to one line, as they fit in 84 columns, which is acceptable. While at it, also change the capital 'S' to 's' in 'sentinel'. Link: https://lore.kernel.org/r/20231121125044.78642-15-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
Callers of svs_get_efuse_data() are already printing an error in case anything goes wrong, and the error print for nvmem_cell_read() failure is redundant: remove it. Link: https://lore.kernel.org/r/20231121125044.78642-14-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
Include the additions of svs_mt8186_platform_probe() in the common svs_mt8192_platform_probe() function, remove the former, and use the latter as .probe() callback for MT8186. Link: https://lore.kernel.org/r/20231121125044.78642-13-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
Drop the "pbank" pointer from struct svs_bank: this was used to simply pass a pointer to the SVS bank that the flow was working on. That for instance needs more locking, and it's avoidable by adding one more parameter to functions working on specific banks, either a bank index number, or passing the svs_bank pointer directly from the caller. Even if the locking can now be reduced, for now, it was still left in place for the sake of making sure to not introduce any stability and/or reliability regression. Link: https://lore.kernel.org/r/20231121125044.78642-12-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
Remove almost all of the per-SoC .efuse_parsing() callbacks and replace them with one common callback svs_common_parse_efuse(): to do that, also change the function signature of the callback to add the newly required pointer to struct svs_platform_data, containing the SVS-global fuse map. This is done for MT8186, MT8188, MT8192, MT8195. As for MT8183, the efuse parse function was simplified by using the new fuse maps. Link: https://lore.kernel.org/r/20231121125044.78642-11-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
The t-calibration-data (SVS-Thermal calibration data) shall exist for all SoCs or SVS won't work anyway: move it to the common svs_probe() function and remove it from all of the per-SoC efuse_parsing() probe callbacks. Link: https://lore.kernel.org/r/20231121125044.78642-10-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
In preparation for commonizing the efuse parsing function, add the SVS-Thermal coefficients for all SoCs for which said function can be commonized (MT8186, MT8188, MT8192, MT8195) and assign those to their platform data structure. That will be used to calculate the MTS parameter with the equation MTS = (ts_coeff * 2) / 1000 This commit brings no functional changes. Link: https://lore.kernel.org/r/20231121125044.78642-9-angelogioacchino.delregno@collabora.comSigned-off-by: -
AngeloGioacchino Del Regno authored
In preparation for adding a common efuse parsing function which will greatly reduce code duplication, add a SoC-specific mapping that will be used to retrieve the right SVS calibration values from the fuses. The maps are two: one is a Global Map used for reading parameters that are SVS-global, and one is a Bank Map for reading calibrations for each SVS Bank. While at it, also populate the map in the platform data for each SoC. Being this a preparation commit, there are no functional changes. Link: https://lore.kernel.org/r/20231121125044.78642-8-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
This driver tries to create a device link to the thermal sensor device: change all instances of "lvts" and "thermal" to "thermal-sensor", as that's what the devicetree node name must be. Note for MT8183: As specified in a previous commit, this SoC never got SVS probing, so this is not a breaking change and it does not require fallback for older device trees. Link: https://lore.kernel.org/r/20231121125044.78642-7-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
Many 32-bit members of this struct can be size reduced to either 16-bit or even 8-bit, for a total saving of ~61 bytes per bank. Keeping in mind that one SoC declares at least two banks, this brings a minimum of ~122 bytes saving (depending on compiler optimization). Link: https://lore.kernel.org/r/20231121125044.78642-6-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
In svs_bank_resource_setup() there is a "big" switch assigning different names depending on sw_id and type and this will surely grow: for example MT8186 has got a two-line type (high/low) SVS bank for CPU_BIG, and this would require more switch nesting. Simplify all of this by changing that to a devm_kasprintf() call that will concatenate the SW_ID string (e.g. SVSB_CPU_LITTLE) with the Type string (e.g. _LOW), resulting in the expected full bank name (e.g. SVSB_CPU_LITTLE_LOW). This being a dynamic allocation can be slower, but this happens only once in the life of this driver and it's not a performance path, so it's totally acceptable. Link: https://lore.kernel.org/r/20231121125044.78642-5-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
The sw_id and type specifiers currently are defined as BIT(x) for unknown reasons: nothing in this code makes any AND/OR check for those, and that would never happen anyway because both sw_id and type are exclusive, as in: - There will never be a bank that is for both CPU and GPU, or for CPU and CCI together; - A bank cannot be contemporarily of one-line and two-line type, as much as it cannot contemporarily have both HIGH and LOW roles Change those definitions to enumerations and also add some kerneldoc to better describe what they are for and what they indicate. While at it, also change the names adding _SWID or _TYPE to increase human readability. Link: https://lore.kernel.org/r/20231121125044.78642-4-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
The svs_regs_v2 array of registers was offsetted by 0xc00 because the SVS node was supposed to have the same iostart as the thermal sensors. That's wrong for two reasons: 1. Two different devices cannot have the same iostart in devicetree, as those would technically be the same device otherwise; and 2. SVS and Thermal Sensor (be it LVTS or AUXADC thermal) are not the same IP, and those two do obviously have a different iospace. Even though there already are users of this register array, the only one that declares a devicetree node for SVS is MT8183 - but it never actually worked because the "tzts1" thermal zone missed thermal trips, hence this driver's probe always failed on that SoC. Knowing this - it is safe to say that keeping compatibility with older device trees is pointless, hence simply subtract the 0xc00 offset from the register offset array. Link: https://lore.kernel.org/r/20231121125044.78642-3-angelogioacchino.delregno@collabora.comSigned-off-by: -
Hsiao Chien Sung authored
Add MT8188 reset bit map for VDOSYS0 and VDOSYS1. Reviewed-by:
Hsiao Chien Sung <shawn.sung@mediatek.com> Signed-off-by:
-
Hsiao Chien Sung authored
- Reset ID must starts from 0 and be consecutive, but the reset bits in our hardware design is not continuous, some bits are left unused, we need a map to solve the problem - Use old style 1-to-1 mapping if .rst_tb is not defined Reviewed-by:
-
Hsiao Chien Sung authored
- Add Padding components - Add Mutex module definitions for Padding Reviewed-by:
-
Hsiao Chien Sung authored
- Add register definitions for MT8188 - Add VDOSYS1 routing table - Update MUTEX definitions accordingly - Set VSYNC length from 0x40 (default) to 1 since ETHDR is bypassed Reviewed-by:
-
yu-chang.lee authored
Add MT8188 VPPSYS0 and VPPSYS1 driver data. Signed-off-by:
yu-chang.lee <yu-chang.lee@mediatek.com> Reviewed-by:
-
Mark Tseng authored
MT8186 svs has a number of banks which used as optimization of opp voltage table for corresponding dvfs drivers. MT8186 svs big core uses 2-line high bank and low bank to optimize the voltage of opp table for higher and lower frequency respectively. Signed-off-by:
Mark Tseng <chun-jen.tseng@mediatek.com> Reviewed-by:
-
Mark Tseng authored
MT8195 svs gpu uses 2-line high bank and low bank to optimize the voltage of opp table for higher and lower frequency respectively. Signed-off-by:
-
- 13 Nov, 2023 1 commit
-
-
Linus Torvalds authored
-
- 12 Nov, 2023 5 commits
-
-
Miri Korenblit authored
The commands should be sorted inside the group definition. Fix the ordering so we won't get following warning: WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg)) Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/ Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/ Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics") Tested-by:
Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Tested-by:
Damian Tometzki <damian@riscv-rocks.de> Acked-by:
Kalle Valo <kvalo@kernel.org> Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Include the upper 5 address bits when inserting TLB entries on a 64-bit kernel. On physical machines those are ignored, but in qemu it's nice to have them included and to be correct. - Stop the 64-bit kernel and show a warning if someone tries to boot on a machine with a 32-bit CPU - Fix a "no previous prototype" warning in parport-gsc * tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Prevent booting 64-bit kernels on PA1.x machines parport: gsc: mark init function static parisc/pgtable: Do not drop upper 5 address bits of physical address
-
Linus Torvalds authored
Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - support PREEMPT_DYNAMIC with static keys - relax memory ordering for atomic operations - support BPF CPU v4 instructions for LoongArch - some build and runtime warning fixes * tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: selftests/bpf: Enable cpu v4 tests for LoongArch LoongArch: BPF: Support signed mod instructions LoongArch: BPF: Support signed div instructions LoongArch: BPF: Support 32-bit offset jmp instructions LoongArch: BPF: Support unconditional bswap instructions LoongArch: BPF: Support sign-extension mov instructions LoongArch: BPF: Support sign-extension load instructions LoongArch: Add more instruction opcodes and emit_* helpers LoongArch/smp: Call rcutree_report_cpu_starting() earlier LoongArch: Relax memory ordering for atomic operations LoongArch: Mark __percpu functions as always inline LoongArch: Disable module from accessing external data directly LoongArch: Support PREEMPT_DYNAMIC with static keys
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Finish a refactor of pgprot_framebuffer() which dependend on some changes that were merged via the drm tree - Fix some kernel-doc warnings to quieten the bots Thanks to Nathan Lynch and Thomas Zimmermann. * tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code powerpc: Remove file parameter from phys_mem_access_prot() powerpc/machdep: Remove trailing whitespaces
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: - ctime caching fix (for setxattr) - encryption fix - DNS resolver mount fix - debugging improvements - multichannel fixes including cases where server stops or starts supporting multichannel after mount - reconnect fix - minor cleanups * tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number for cifs.ko cifs: handle when server stops supporting multichannel cifs: handle when server starts supporting multichannel Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO smb3: allow dumping session and tcon id to improve stats analysis and debugging smb: client: fix mount when dns_resolver key is not available smb3: fix caching of ctime on setxattr smb3: minor cleanup of session handling code cifs: reconnect work should have reference on server struct cifs: do not pass cifs_sb when trying to add channels cifs: account for primary channel in the interface list cifs: distribute channels across interfaces based on speed cifs: handle cases where a channel is closed smb3: more minor cleanups for session handling routines smb3: minor RDMA cleanup cifs: Fix encryption of cleared, but unset rq_iter data buffers
-
- 11 Nov, 2023 1 commit
-
-
Linus Torvalds authored
Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - Documentation update: Add a note about argument and return value fetching is the best effort because it depends on the type. - objpool: Fix to make internal global variables static in test_objpool.c. - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the same prototypes in asm/kprobes.h for some architectures, but some of them are missing the prototype and it causes a warning. So move the prototype into linux/kprobes.h. - tracing: Fix to check the tracepoint event and return event at parsing stage. The tracepoint event doesn't support %return but if $retval exists, it will be converted to %return silently. This finds that case and rejects it. - tracing: Fix the order of the descriptions about the parameters of __kprobe_event_gen_cmd_start() to be consistent with the argument list of the function. * tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/kprobes: Fix the order of argument descriptions tracing: fprobe-event: Fix to check tracepoint event and return kprobes: unify kprobes_exceptions_nofify() prototypes lib: test_objpool: make global variables static Documentation: tracing: Add a note about argument and retval access
-
- 10 Nov, 2023 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev fixes and cleanups from Helge Deller: - fix double free and resource leaks in imsttfb - lots of remove callback cleanups and section mismatch fixes in omapfb, amifb and atmel_lcdfb - error code fix and memparse simplification in omapfb * tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits) fbdev: fsl-diu-fb: mark wr_reg_wa() static fbdev: amifb: Convert to platform remove callback returning void fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning fbdev: hyperv_fb: fix uninitialized local variable use fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void fbdev: omapfb/tfp410: Convert to platform remove callback returning void fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void fbdev: omapfb/opa362: Convert to platform remove callback returning void fbdev: omapfb/hdmi: Convert to platform remove callback returning void fbdev: omapfb/dvi: Convert to platform remove callback returning void fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void fbdev: omapfb/dpi: Convert to platform remove callback returning void fbdev: omapfb/analog-tv: Convert to platform remove callback returning void fbdev: atmel_lcdfb: Convert to platform remove callback returning void fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs ...
-
Yujie Liu authored
The order of descriptions should be consistent with the argument list of the function, so "kretprobe" should be the second one. int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe, const char *name, const char *loc, ...) Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/ Fixes: 2a588dd1 ("tracing: Add kprobe event command generation functions") Suggested-by:Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by:
Yujie Liu <yujie.liu@intel.com> Reviewed-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org>
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Daniel Vetter: "Dave's VPN to the big machine died, so it's on me to do fixes pr this and next week while everyone else is at plumbers. - big pile of amd fixes, but mostly for hw support newly added in 6.7 - i915 fixes, mostly minor things - qxl memory leak fix - vc4 uaf fix in mock helpers - syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE" * tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits) drm/amdgpu: fix error handling in amdgpu_vm_init drm/amdgpu: Fix possible null pointer dereference drm/amdgpu: move UVD and VCE sched entity init after sched init drm/amdgpu: move kfd_resume before the ip late init drm/amd: Explicitly check for GFXOFF to be enabled for s0ix drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2) drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5) drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support drm/amdgpu: fix software pci_unplug on some chips drm/amd/display: remove duplicated argument drm/amdgpu: correct mca debugfs dump reg list drm/amdgpu: correct acclerator check architecutre dump drm/amdgpu: add pcs xgmi v6.4.0 ras support drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3 drm/amdgpu: disable smu v13.0.6 mca debug mode by default drm/amdgpu: Support multiple error query modes drm/amdgpu: refine smu v13.0.6 mca dump driver drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2) drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV drm: amd: Resolve Sphinx unexpected indentation warning ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: "Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken MediaTek firmware: - Move the MediaTek GIC quirk handling from irqchip to core. Before the merging window commit 44bd78dd ("irqchip/gic-v3: Disable pseudo NMIs on MediaTek devices w/ firmware issues") temporarily addressed this issue. Fixed now at a deeper level in the arch code - Reject events meant for other PMUs in the CoreSight PMU driver, otherwise some of the core PMU events would disappear - Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers, causing some events to be invisible - Remove duplicate declaration of __arm64_sys##name following the patch to avoid prototype warning for syscalls - Typos in the elf_hwcap documentation" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/syscall: Remove duplicate declaration Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW" arm64: Move MediaTek GIC quirk handling from irqchip to core arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers perf: arm_cspmu: Reject events meant for other PMUs Documentation/arm64: Fix typos in elf_hwcaps -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of fixes for rc1. The majority of changes are various ASoC driver-specific small fixes and usual HD-audio quirks, while there are a couple of core changes: a fix in ALSA core procfs code to avoid deadlocks at disconnection and an ASoC core fix for DAPM clock widgets" * tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: OSS: dmasound/paula: Convert to platform remove callback returning void ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus ALSA: info: Fix potential deadlock at disconnection ASoC: nau8540: Add self recovery to improve capture quility ALSA: hda/realtek: Add support dual speaker for Dell ALSA: hda: Add ASRock X670E Taichi to denylist ALSA: hda/realtek: Add quirk for ASUS UX7602ZM ASoC: SOF: sof-client: trivial: fix comment typo ASoC: dapm: fix clock get name ASoC: hdmi-codec: register hpd callback on component probe ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages ASoC: da7219: Improve system suspend and resume handling ASoC: codecs: Modify macro value error ASoC: codecs: Modify the wrong judgment of re value ASoC: codecs: Modify the maximum value of calib ASoC: amd: acp: fix for i2s mode register field update ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb() ASoC: rt712-sdca: fix speaker route missing issue ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings
-
https://gitlab.freedesktop.org/agd5f/linuxDaniel Vetter authored
amd-drm-next-6.7-2023-11-10: amdgpu: - SR-IOV fixes - DMCUB fixes - DCN3.5 fixes - DP2 fixes - SubVP fixes - SMU14 fixes - SDMA4.x fixes - Suspend/resume fixes - AGP regression fix - UAF fixes for some error cases - SMU 13.0.6 fixes - Documentation fixes - RAS fixes - Hotplug fixes - Scheduling entity ordering fix - GPUVM fixes Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231110190703.4741-1-alexander.deucher@amd.com
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A couple of fixes that came in during the merge window: one Kconfig dependency fix and another fix for a long standing issue where a sync transfer races with system suspend" * tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Fix null dereference on suspend spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - Fix broken cache-flush support for Micron eMMCs - Revert 'mmc: core: Capture correct oemid-bits for eMMC cards' MMC host: - sdhci_am654: Fix TAP value parsing for legacy speed mode - sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750 - vub300: Fix an error path in probe" * tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER Revert "mmc: core: Capture correct oemid-bits for eMMC cards" mmc: vub300: fix an error code mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A mmc: sdhci_am654: fix start loop index for TAP value parsing
-
Linus Torvalds authored
Merge tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fixes from Thierry Reding: "This contains two very small fixes that I failed to include in the main pull request" * tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Fix double shift bug pwm: samsung: Fix a bit test in pwm_samsung_resume()
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "Mostly just a few fixes and cleanups caused by the read multishot support. Outside of that, a stable fix for how a connect retry is done" * tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux: io_uring: do not clamp read length for multishot read io_uring: do not allow multishot read to set addr or len io_uring: indicate if io_kbuf_recycle did recycle anything io_uring/rw: add separate prep handler for fixed read/write io_uring/rw: add separate prep handler for readv/writev io_uring/net: ensure socket is marked connected on connect retry io_uring/rw: don't attempt to allocate async data if opcode doesn't need it
-
