- 22 Jul, 2018 8 commits
-
-
Roopa Prabhu authored
Add a new option do_notify to vxlan_fdb_destroy to make sending netlink notify optional. Used by a later patch. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
- Add new vxlan_fdb_alloc helper - rename existing vxlan_fdb_create into vxlan_fdb_update: because it really creates or updates an existing fdb entry - move new fdb creation into a separate vxlan_fdb_create Main motivation for this change is to introduce the ability to decouple vxlan fdb creation and notify, used in a later patch. Signed-off-by: -
Roopa Prabhu authored
rtnl_configure_link sets dev->rtnl_link_state to RTNL_LINK_INITIALIZED and unconditionally calls __dev_notify_flags to notify user-space of dev flags. current call sequence for rtnl_configure_link rtnetlink_newlink rtnl_link_ops->newlink rtnl_configure_link (unconditionally notifies userspace of default and new dev flags) If a newlink handler wants to call rtnl_configure_link early, we will end up with duplicate notifications to user-space. This patch fixes rtnl_configure_link to check rtnl_link_state and call __dev_notify_flags with gchanges = 0 if already RTNL_LINK_INITIALIZED. Later in the series, this patch will help the following sequence where a driver implementing newlink can call rtnl_configure_link to initialize the link early. makes the following call sequence work: rtnetlink_newlink rtnl_link_ops->newlink (vxlan) -> rtnl_configure_link (initializes link and notifies user-space of default dev flags) rtnl_configure_link (updates dev flags if requested by user ifm and notifies user-space of new dev flags) Signed-off-by: -
Florian Westphal authored
Got crash report with following backtrace: BUG: unable to handle kernel paging request at ffff8801869daffe RIP: 0010:[<ffffffff816429c4>] [<ffffffff816429c4>] ip6_finish_output2+0x394/0x4c0 RSP: 0018:ffff880186c83a98 EFLAGS: 00010283 RAX: ffff8801869db00e ... [<ffffffff81644cdc>] ip6_finish_output+0x8c/0xf0 [<ffffffff81644d97>] ip6_output+0x57/0x100 [<ffffffff81643dc9>] ip6_forward+0x4b9/0x840 [<ffffffff81645566>] ip6_rcv_finish+0x66/0xc0 [<ffffffff81645db9>] ipv6_rcv+0x319/0x530 [<ffffffff815892ac>] netif_receive_skb+0x1c/0x70 [<ffffffffc0060bec>] atl1c_clean+0x1ec/0x310 [atl1c] ... The bad access is in neigh_hh_output(), at skb->data - 16 (HH_DATA_MOD). atl1c driver provided skb with no headroom, so 14 bytes (ethernet header) got pulled, but then 16 are copied. Reserve NET_SKB_PAD bytes headroom, like netdev_alloc_skb(). Compile tested only; I lack hardware. Fixes: 7b701764 ("atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring") Signed-off-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Hangbin Liu authored
There are two scenarios that we will restore deleted records. The first is when device down and up(or unmap/remap). In this scenario the new filter mode is same with previous one. Because we get it from in_dev->mc_list and we do not touch it during device down and up. The other scenario is when a new socket join a group which was just delete and not finish sending status reports. In this scenario, we should use the current filter mode instead of restore old one. Here are 4 cases in total. old_socket new_socket before_fix after_fix IN(A) IN(A) ALLOW(A) ALLOW(A) IN(A) EX( ) TO_IN( ) TO_EX( ) EX( ) IN(A) TO_EX( ) ALLOW(A) EX( ) EX( ) TO_EX( ) TO_EX( ) Fixes: 24803f38 (igmp: do not remove igmp souce list info when set link down) Fixes: 1666d49e (mld: do not remove mld souce list info when set link down) Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Uwe Kleine-König authored
free_irq() waits until all handlers for this IRQ have completed. As the relevant handler (mv88e6xxx_g1_irq_thread_fn()) takes the chip's reg_lock it might never return if the thread calling free_irq() holds this lock. For the same reason kthread_cancel_delayed_work_sync() in the polling case must not hold this lock. Also first free the irq (or stop the worker respectively) such that mv88e6xxx_g1_irq_thread_work() isn't called any more before the irq mappings are dropped in mv88e6xxx_g1_irq_free_common() to prevent the worker thread to call handle_nested_irq(0) which results in a NULL-pointer exception. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Eric Dumazet authored
syzbot caught a NULL deref [1], caused by skb_segment() skb_segment() has many "goto err;" that assume the @err variable contains -ENOMEM. A successful call to __skb_linearize() should not clear @err, otherwise a subsequent memory allocation error could return NULL. While we are at it, we might use -EINVAL instead of -ENOMEM when MAX_SKB_FRAGS limit is reached. [1] kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 0 PID: 13285 Comm: syz-executor3 Not tainted 4.18.0-rc4+ #146 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tcp_gso_segment+0x3dc/0x1780 net/ipv4/tcp_offload.c:106 Code: f0 ff ff 0f 87 1c fd ff ff e8 00 88 0b fb 48 8b 75 d0 48 b9 00 00 00 00 00 fc ff df 48 8d be 90 00 00 00 48 89 f8 48 c1 e8 03 <0f> b6 14 08 48 8d 86 94 00 00 00 48 89 c6 83 e0 07 48 c1 ee 03 0f RSP: 0018:ffff88019b7fd060 EFLAGS: 00010206 RAX: 0000000000000012 RBX: 0000000000000020 RCX: dffffc0000000000 RDX: 0000000000040000 RSI: 0000000000000000 RDI: 0000000000000090 RBP: ffff88019b7fd0f0 R08: ffff88019510e0c0 R09: ffffed003b5c46d6 R10: ffffed003b5c46d6 R11: ffff8801dae236b3 R12: 0000000000000001 R13: ffff8801d6c581f4 R14: 0000000000000000 R15: ffff8801d6c58128 FS: 00007fcae64d6700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004e8664 CR3: 00000001b669b000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tcp4_gso_segment+0x1c3/0x440 net/ipv4/tcp_offload.c:54 inet_gso_segment+0x64e/0x12d0 net/ipv4/af_inet.c:1342 inet_gso_segment+0x64e/0x12d0 net/ipv4/af_inet.c:1342 skb_mac_gso_segment+0x3b5/0x740 net/core/dev.c:2792 __skb_gso_segment+0x3c3/0x880 net/core/dev.c:2865 skb_gso_segment include/linux/netdevice.h:4099 [inline] validate_xmit_skb+0x640/0xf30 net/core/dev.c:3104 __dev_queue_xmit+0xc14/0x3910 net/core/dev.c:3561 dev_queue_xmit+0x17/0x20 net/core/dev.c:3602 neigh_hh_output include/net/neighbour.h:473 [inline] neigh_output include/net/neighbour.h:481 [inline] ip_finish_output2+0x1063/0x1860 net/ipv4/ip_output.c:229 ip_finish_output+0x841/0xfa0 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:276 [inline] ip_output+0x223/0x880 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] ip_local_out+0xc5/0x1b0 net/ipv4/ip_output.c:124 iptunnel_xmit+0x567/0x850 net/ipv4/ip_tunnel_core.c:91 ip_tunnel_xmit+0x1598/0x3af1 net/ipv4/ip_tunnel.c:778 ipip_tunnel_xmit+0x264/0x2c0 net/ipv4/ipip.c:308 __netdev_start_xmit include/linux/netdevice.h:4148 [inline] netdev_start_xmit include/linux/netdevice.h:4157 [inline] xmit_one net/core/dev.c:3034 [inline] dev_hard_start_xmit+0x26c/0xc30 net/core/dev.c:3050 __dev_queue_xmit+0x29ef/0x3910 net/core/dev.c:3569 dev_queue_xmit+0x17/0x20 net/core/dev.c:3602 neigh_direct_output+0x15/0x20 net/core/neighbour.c:1403 neigh_output include/net/neighbour.h:483 [inline] ip_finish_output2+0xa67/0x1860 net/ipv4/ip_output.c:229 ip_finish_output+0x841/0xfa0 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:276 [inline] ip_output+0x223/0x880 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] ip_local_out+0xc5/0x1b0 net/ipv4/ip_output.c:124 ip_queue_xmit+0x9df/0x1f80 net/ipv4/ip_output.c:504 tcp_transmit_skb+0x1bf9/0x3f10 net/ipv4/tcp_output.c:1168 tcp_write_xmit+0x1641/0x5c20 net/ipv4/tcp_output.c:2363 __tcp_push_pending_frames+0xb2/0x290 net/ipv4/tcp_output.c:2536 tcp_push+0x638/0x8c0 net/ipv4/tcp.c:735 tcp_sendmsg_locked+0x2ec5/0x3f00 net/ipv4/tcp.c:1410 tcp_sendmsg+0x2f/0x50 net/ipv4/tcp.c:1447 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:641 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:651 __sys_sendto+0x3d7/0x670 net/socket.c:1797 __do_sys_sendto net/socket.c:1809 [inline] __se_sys_sendto net/socket.c:1805 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1805 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x455ab9 Code: 1d ba fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb b9 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fcae64d5c68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fcae64d66d4 RCX: 0000000000455ab9 RDX: 0000000000000001 RSI: 0000000020000200 RDI: 0000000000000013 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000014 R13: 00000000004c1145 R14: 00000000004d1818 R15: 0000000000000006 Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) Fixes: ddff00d4 ("net: Move skb_has_shared_frag check out of GRE code and into segmentation") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
David Ahern authored
Example setup: host: ip -6 addr add dev eth1 2001:db8:104::4 where eth1 is enslaved to a VRF switch: ip -6 ro add 2001:db8:104::4/128 dev br1 where br1 only has an LLA ping6 2001:db8:104::4 ssh 2001:db8:104::4 (NOTE: UDP works fine if the PKTINFO has the address set to the global address and ifindex is set to the index of eth1 with a destination an LLA). For ICMP, icmp6_iif needs to be updated to check if skb->dev is an L3 master. If it is then return the ifindex from rt6i_idev similar to what is done for loopback. For TCP, restore the original tcp_v6_iif definition which is needed in most places and add a new tcp_v6_iif_l3_slave that considers the l3_slave variability. This latter check is only needed for socket lookups. Fixes: 9ff74384 ("net: vrf: Handle ipv6 multicast and link-local addresses") Signed-off-by:David Ahern <dsahern@gmail.com> Signed-off-by:
-
- 21 Jul, 2018 10 commits
-
-
YueHaibing authored
Fix following warning: net/ipv4/bpfilter/sockopt.c:28:5: error: symbol 'bpfilter_ip_set_sockopt' redeclared with different type net/ipv4/bpfilter/sockopt.c:34:5: error: symbol 'bpfilter_ip_get_sockopt' redeclared with different type Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Heiner Kallweit authored
The situation described in the comment can occur also with PHY_IGNORE_INTERRUPT, therefore change the condition to include it. Fixes: f555f34f ("net: phy: fix auto-negotiation stall due to unavailable interrupt") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Sudarsana Reddy Kalluru says: ==================== qed: Fix series II. The patch series fixes few issues in the qed driver. Please consider applying it to 'net' branch. ==================== Signed-off-by: -
Sudarsana Reddy Kalluru authored
FW hsi contains 256 approximation buckets which are split in ramrod into eight u32 values, but driver is using eight 'unsigned long' variables. This patch fixes the mcast logic by making the API utilize u32. Fixes: 83aeb933 ("qed*: Trivial modifications") Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
There's a possible race where driver can read link status in mid-transition and see that virtual-link is up yet speed is 0. Since in this mid-transition we're guaranteed to see a mailbox from MFW soon, we can afford to treat this as link down. Fixes: cc875c2e ("qed: Add link support") Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Apparently, MFW publishes EEE capabilities even for Fiber-boards that don't support them, and later since qed internally sets adv_caps it would cause link-flap avoidance (LFA) to fail when driver would initiate the link. This in turn delays the link, causing traffic to fail. Driver has been modified to not to ask MFW for any EEE config if EEE isn't to be enabled. Fixes: 645874e5 ("qed: Add support for Energy efficient ethernet.") Signed-off-by:
-
YueHaibing authored
Add a missing rcu_read_unlock in the error path Fixes: c95567c8 ("caif: added check for potential null return") Signed-off-by:
-
Jarod Wilson authored
For some time now, if you load the bonding driver and configure bond parameters via sysfs using minimal config options, such as specifying nothing but the mode, relying on defaults for everything else, modes that cannot use arp monitoring (802.3ad, balance-tlb, balance-alb) all wind up with both arp_interval=0 (as it should be) and miimon=0, which means the miimon monitor thread never actually runs. This is particularly problematic for 802.3ad. For example, from an LNST recipe I've set up: $ modprobe bonding max_bonds=0" $ echo "+t_bond0" > /sys/class/net/bonding_masters" $ ip link set t_bond0 down" $ echo "802.3ad" > /sys/class/net/t_bond0/bonding/mode" $ ip link set ens1f1 down" $ echo "+ens1f1" > /sys/class/net/t_bond0/bonding/slaves" $ ip link set ens1f0 down" $ echo "+ens1f0" > /sys/class/net/t_bond0/bonding/slaves" $ ethtool -i t_bond0" $ ip link set ens1f1 up" $ ip link set ens1f0 up" $ ip link set t_bond0 up" $ ip addr add 192.168.9.1/24 dev t_bond0" $ ip addr add 2002::1/64 dev t_bond0" This bond comes up okay, but things look slightly suspect in /proc/net/bonding/t_bond0 output: $ grep -i mii /proc/net/bonding/t_bond0 MII Status: up MII Polling Interval (ms): 0 MII Status: up MII Status: up Now, pull a cable on one of the ports in the bond, then reconnect it, and you'll see: Slave Interface: ens1f0 MII Status: down Speed: 1000 Mbps Duplex: full I believe this became a major issue as of commit 4d2c0cda, which for 802.3ad bonds, sets slave->link = BOND_LINK_DOWN, with a comment about relying on link monitoring via miimon to set it correctly, but since the miimon work queue never runs, the link just stays marked down. If we simply tweak bond_option_mode_set() slightly, we can check for the non-arp modes having no miimon value set, and insert BOND_DEFAULT_MIIMON, which gets things back in full working order. This problem exists as far back as 4.14, and might be worth fixing in all stable trees since, though the work-around is to simply specify an miimon value yourself. Reported-by:
Bob Ball <ball@umich.edu> Signed-off-by:
Jarod Wilson <jarod@redhat.com> Acked-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-07-18 The following series provides fixes to mlx5 core and net device driver. Please pull and let me know if there's any problem. For -stable v4.7 net/mlx5e: Don't allow aRFS for encapsulated packets net/mlx5e: Fix quota counting in aRFS expire flow For -stable v4.15 net/mlx5e: Only allow offloading decap egress (egdev) flows net/mlx5e: Refine ets validation function net/mlx5: Adjust clock overflow work period For -stable v4.17 net/mlx5: E-Switch, UBSAN fix undefined behavior in mlx5_eswitch_mode ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-07-20 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix in BPF Makefile to detect llvm-objcopy in a more robust way which is needed for pahole's BTF converter and minor UAPI tweaks in BTF_INT_BITS() to shrink the mask before eventual UAPI freeze, from Martin. 2) Fix a segfault in bpftool when prog pin id has no further arguments such as id value or file specified, from Taeung. 3) Fix powerpc JIT handling of XADD which has jumps to exit path that would potentially bypass verifier expectations e.g. with subprog calls. Also add a test case to make sure XADD is not mangling src/dst register, from Daniel. ==================== Signed-off-by:
-
- 20 Jul, 2018 10 commits
-
-
Doron Roberts-Kedes authored
The current code does not check sk->sk_shutdown & RCV_SHUTDOWN. tls_sw_recvmsg may return a positive value in the case where bytes have already been copied when the socket is shutdown. sk->sk_err has been cleared, causing the tls_wait_data to hang forever on a subsequent invocation. Checking sk->sk_shutdown & RCV_SHUTDOWN, as in tcp_recvmsg, fixes this problem. Fixes: c46234eb ("tls: RX path for ktls") Acked-by:
Dave Watson <davejwatson@fb.com> Signed-off-by:
Doron Roberts-Kedes <doronrk@fb.com> Signed-off-by:
-
David S. Miller authored
Yuchung Cheng says: ==================== fix DCTCP ECE Ack series This patch set address that the existing DCTCP implementation does not fully implement the ACK policy specified in the RFC. This improves the responsiveness of CE status change particularly on flows with small inflight. ==================== Signed-off-by: -
Yuchung Cheng authored
Per DCTCP RFC8257 (Section 3.2) the ACK reflecting the CE status change has to be sent immediately so the sender can respond quickly: """ When receiving packets, the CE codepoint MUST be processed as follows: 1. If the CE codepoint is set and DCTCP.CE is false, set DCTCP.CE to true and send an immediate ACK. 2. If the CE codepoint is not set and DCTCP.CE is true, set DCTCP.CE to false and send an immediate ACK. """ Previously DCTCP implementation may continue to delay the ACK. This patch fixes that to implement the RFC by forcing an immediate ACK. Tested with this packetdrill script provided by Larry Brakmo 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < [ect0] SEW 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> 0.100 > SE. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8> 0.110 < [ect0] . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_SOCKET, SO_DEBUG, [1], 4) = 0 0.200 < [ect0] . 1:1001(1000) ack 1 win 257 0.200 > [ect01] . 1:1(0) ack 1001 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 1:2(1) ack 1001 0.200 < [ect0] . 1001:2001(1000) ack 2 win 257 +0.005 < [ce] . 2001:3001(1000) ack 2 win 257 +0.000 > [ect01] . 2:2(0) ack 2001 // Previously the ACK below would be delayed by 40ms +0.000 > [ect01] E. 2:2(0) ack 3001 +0.500 < F. 9501:9501(0) ack 4 win 257 Signed-off-by:Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Yuchung Cheng authored
Currently when a DCTCP receiver delays an ACK and receive a data packet with a different CE mark from the previous one's, it sends two immediate ACKs acking previous and latest sequences respectly (for ECN accounting). Previously sending the first ACK may mark off the delayed ACK timer (tcp_event_ack_sent). This may subsequently prevent sending the second ACK to acknowledge the latest sequence (tcp_ack_snd_check). The culprit is that tcp_send_ack() assumes it always acknowleges the latest sequence, which is not true for the first special ACK. The fix is to not make the assumption in tcp_send_ack and check the actual ack sequence before cancelling the delayed ACK. Further it's safer to pass the ack sequence number as a local variable into tcp_send_ack routine, instead of intercepting tp->rcv_nxt to avoid future bugs like this. Reported-by:
-
Yuchung Cheng authored
Refactor and create helpers to send the special ACK in DCTCP. Signed-off-by:
-
Martin KaFai Lau authored
I noticed the "--version" option of the llvm-objcopy command has recently disappeared from the master llvm branch. It is currently used as a BTF support test in tools/testing/selftests/bpf/Makefile. This patch replaces it with "--help" which should be less error prone in the future. Fixes: c0fa1b6c ("bpf: btf: Add BTF tests") Signed-off-by:
-
Martin KaFai Lau authored
This patch shrinks the BTF_INT_BITS() mask. The current btf_int_check_meta() ensures the nr_bits of an integer cannot exceed 64. Hence, it is mostly an uapi cleanup. The actual btf usage (i.e. seq_show()) is also modified to use u8 instead of u16. The verification (e.g. btf_int_check_meta()) path stays as is to deal with invalid BTF situation. Fixes: 69b693f0 ("bpf: btf: Introduce BPF Type Format (BTF)") Signed-off-by:
-
Taeung Song authored
Arguments of 'pin' subcommand should be checked at the very beginning of do_pin_any(). Otherwise segfault errors can occur when using 'map pin' or 'prog pin' commands, so fix it. # bpftool prog pin id Segmentation fault Fixes: 71bb428f ("tools: bpf: add bpftool") Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reported-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Taeung Song <treeze.taeung@gmail.com> Signed-off-by:
-
Zhao Chen authored
The calculation of "wqe_size" is not correct when the tx queue is busy in hinic_xmit_frame(). When there are no free WQEs, the tx flow will unmap the skb buffer, then ring the doobell for the pending packets. But the "wqe_size" which used to calculate the doorbell address is not correct. The wqe size should be cleared to 0, otherwise, it will cause a doorbell error. This patch fixes the problem. Reported-by:
Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by:
Zhao Chen <zhaochen6@huawei.com> Signed-off-by:
-
Tariq Toukan authored
Fix the warning below by calling the ptr_ring_consume_bh, which uses spin_[un]lock_bh. [ 179.064300] ================================ [ 179.069073] WARNING: inconsistent lock state [ 179.073846] 4.18.0-rc2+ #18 Not tainted [ 179.078133] -------------------------------- [ 179.082907] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 179.089637] swapper/21/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 179.095478] 00000000963d1995 (&(&r->consumer_lock)->rlock){+.?.}, at: __page_pool_empty_ring+0x61/0x100 [ 179.105988] {SOFTIRQ-ON-W} state was registered at: [ 179.111443] _raw_spin_lock+0x35/0x50 [ 179.115634] __page_pool_empty_ring+0x61/0x100 [ 179.120699] page_pool_destroy+0x32/0x50 [ 179.125204] mlx5e_free_rq+0x38/0xc0 [mlx5_core] [ 179.130471] mlx5e_close_channel+0x20/0x120 [mlx5_core] [ 179.136418] mlx5e_close_channels+0x26/0x40 [mlx5_core] [ 179.142364] mlx5e_close_locked+0x44/0x50 [mlx5_core] [ 179.148509] mlx5e_close+0x42/0x60 [mlx5_core] [ 179.153936] __dev_close_many+0xb1/0x120 [ 179.158749] dev_close_many+0xa2/0x170 [ 179.163364] rollback_registered_many+0x148/0x460 [ 179.169047] rollback_registered+0x56/0x90 [ 179.174043] unregister_netdevice_queue+0x7e/0x100 [ 179.179816] unregister_netdev+0x18/0x20 [ 179.184623] mlx5e_remove+0x2a/0x50 [mlx5_core] [ 179.190107] mlx5_remove_device+0xe5/0x110 [mlx5_core] [ 179.196274] mlx5_unregister_interface+0x39/0x90 [mlx5_core] [ 179.203028] cleanup+0x5/0xbfc [mlx5_core] [ 179.208031] __x64_sys_delete_module+0x16b/0x240 [ 179.213640] do_syscall_64+0x5a/0x210 [ 179.218151] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 179.224218] irq event stamp: 334398 [ 179.228438] hardirqs last enabled at (334398): [<ffffffffa511d8b7>] rcu_process_callbacks+0x1c7/0x790 [ 179.239178] hardirqs last disabled at (334397): [<ffffffffa511d872>] rcu_process_callbacks+0x182/0x790 [ 179.249931] softirqs last enabled at (334386): [<ffffffffa509732e>] irq_enter+0x5e/0x70 [ 179.259306] softirqs last disabled at (334387): [<ffffffffa509741c>] irq_exit+0xdc/0xf0 [ 179.268584] [ 179.268584] other info that might help us debug this: [ 179.276572] Possible unsafe locking scenario: [ 179.276572] [ 179.283877] CPU0 [ 179.286954] ---- [ 179.290033] lock(&(&r->consumer_lock)->rlock); [ 179.295546] <Interrupt> [ 179.298830] lock(&(&r->consumer_lock)->rlock); [ 179.304550] [ 179.304550] *** DEADLOCK *** Fixes: ff7d6b27 ("page_pool: refurbish version of page_pool code") Signed-off-by:Tariq Toukan <tariqt@mellanox.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
- 19 Jul, 2018 12 commits
-
-
Alexei Starovoitov authored
Daniel Borkmann says: ==================== This set adds a ppc64 JIT fix for xadd as well as a missing test case for verifying whether xadd messes with src/dst reg. Thanks! ==================== Signed-off-by:Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
We currently do not have such a test case in test_verifier selftests but it's important to test under bpf_jit_enable=1 to make sure JIT implementations do not mistakenly mess with src/dst reg for xadd/{w,dw}. Signed-off-by: -
Daniel Borkmann authored
None of the JITs is allowed to implement exit paths from the BPF insn mappings other than BPF_JMP | BPF_EXIT. In the BPF core code we have a couple of rewrites in eBPF (e.g. LD_ABS / LD_IND) and in eBPF to cBPF translation to retain old existing behavior where exceptions may occur; they are also tightly controlled by the verifier where it disallows some of the features such as BPF to BPF calls when legacy LD_ABS / LD_IND ops are present in the BPF program. During recent review of all BPF_XADD JIT implementations I noticed that the ppc64 one is buggy in that it contains two jumps to exit paths. This is problematic as this can bypass verifier expectations e.g. pointed out in commit f6b1b3bf ("bpf: fix subprog verifier bypass by div/mod by 0 exception"). The first exit path is obsoleted by the fix in ca369602 ("bpf: allow xadd only on aligned memory") anyway, and for the second one we need to do a fetch, add and store loop if the reservation from lwarx/ldarx was lost in the meantime. Fixes: 156d0e29 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Reviewed-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by:
Sandipan Das <sandipan@linux.vnet.ibm.com> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A rawmidi race fix and three trivial HD-audio quirks" * tag 'sound-4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Yet another Clevo P950 quirk entry ALSA: rawmidi: Change resized buffers atomically ALSA: hda/realtek - Add Panasonic CF-SZ6 headset jack quirk ALSA: hda: add mute led support for HP ProBook 455 G5
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This fixes an allocation error-path bug in af_alg discovered by syzkaller" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: af_alg - Initialize sg_num_bytes in error code path
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Lots of fixes, here goes: 1) NULL deref in qtnfmac, from Gustavo A. R. Silva. 2) Kernel oops when fw download fails in rtlwifi, from Ping-Ke Shih. 3) Lost completion messages in AF_XDP, from Magnus Karlsson. 4) Correct bogus self-assignment in rhashtable, from Rishabh Bhatnagar. 5) Fix regression in ipv6 route append handling, from David Ahern. 6) Fix masking in __set_phy_supported(), from Heiner Kallweit. 7) Missing module owner set in x_tables icmp, from Florian Westphal. 8) liquidio's timeouts are HZ dependent, fix from Nicholas Mc Guire. 9) Link setting fixes for sh_eth and ravb, from Vladimir Zapolskiy. 10) Fix NULL deref when using chains in act_csum, from Davide Caratti. 11) XDP_REDIRECT needs to check if the interface is up and whether the MTU is sufficient. From Toshiaki Makita. 12) Net diag can do a double free when killing TCP_NEW_SYN_RECV connections, from Lorenzo Colitti. 13) nf_defrag in ipv6 can unnecessarily hold onto dst entries for a full minute, delaying device unregister. From Eric Dumazet. 14) Update MAC entries in the correct order in ixgbe, from Alexander Duyck. 15) Don't leave partial mangles bpf program in jit_subprogs, from Daniel Borkmann. 16) Fix pfmemalloc SKB state propagation, from Stefano Brivio. 17) Fix ACK handling in DCTCP congestion control, from Yuchung Cheng. 18) Use after free in tun XDP_TX, from Toshiaki Makita. 19) Stale ipv6 header pointer in ipv6 gre code, from Prashant Bhole. 20) Don't reuse remainder of RX page when XDP is set in mlx4, from Saeed Mahameed. 21) Fix window probe handling of TCP rapair sockets, from Stefan Baranoff. 22) Missing socket locking in smc_ioctl(), from Ursula Braun. 23) IPV6_ILA needs DST_CACHE, from Arnd Bergmann. 24) Spectre v1 fix in cxgb3, from Gustavo A. R. Silva. 25) Two spots in ipv6 do a rol32() on a hash value but ignore the result. Fixes from Colin Ian King" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (176 commits) tcp: identify cryptic messages as TCP seq # bugs ptp: fix missing break in switch hv_netvsc: Fix napi reschedule while receive completion is busy MAINTAINERS: Drop inactive Vitaly Bordug's email net: cavium: Add fine-granular dependencies on PCI net: qca_spi: Fix log level if probe fails net: qca_spi: Make sure the QCA7000 reset is triggered net: qca_spi: Avoid packet drop during initial sync ipv6: fix useless rol32 call on hash ipv6: sr: fix useless rol32 call on hash net: sched: Using NULL instead of plain integer net: usb: asix: replace mii_nway_restart in resume path net: cxgb3_main: fix potential Spectre v1 lib/rhashtable: consider param->min_size when setting initial table size net/smc: reset recv timeout after clc handshake net/smc: add error handling for get_user() net/smc: optimize consumer cursor updates net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL. ipv6: ila: select CONFIG_DST_CACHE net: usb: rtl8150: demote allmulti message to dev_dbg() ... -
Roi Dayan authored
We get egress rules through the egdev mechanism when the ingress device is not supporting offload, with the expected use-case of tunnel decap ingress rule set on shared tunnel device. Make sure to offload egress/egdev rules only if decap action (tunnel key unset) exists there and err otherwise. Fixes: 717503b9 ("net: sched: convert cls_flower->egress_dev users to tc_setup_cb_egdev infra") Signed-off-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Paul Blakey <paulb@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Tariq Toukan authored
Fix bad alignment of SQ buffer in fragmented QP allocation. It should start directly after RQ buffer ends. Take special care of the end case where the RQ buffer does not occupy a whole page. RQ size is a power of two, so would be the case only for small RQ sizes (RQ size < PAGE_SIZE). Fix wrong assignments for sqb->size (mistakenly assigned RQ size), and for npages value of RQ and SQ. Fixes: 3a2f7033 ("net/mlx5: Use order-0 allocations for all WQ types") Signed-off-by:
-
Raed Salem authored
The flow counters binding support commit introduced a code change where none NULL 'rule_dest' is always passed to mlx5_add_flow_rules, this breaks 'DON'T_TRAP' rules insertion. The fix uses the equivalent 'dest_num' value instead of dest pointer at the failed check. fixes: 3b3233fb ('IB/mlx5: Add flow counters binding support') Signed-off-by:
Raed Salem <raeds@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
With debug kernel UBSAN detects the following issue, which might happen when eswitch instance is not created, fix this by testing the eswitch pointer before returning the eswitch mode, if not set return mode = SRIOV_NONE. [ 32.528951] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx5/core/eswitch.c:2219:12 [ 32.528951] member access within null pointer of type 'struct mlx5_eswitch' [ 32.528951] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc3-dirty #181 [ 32.528951] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 32.528951] Call Trace: [ 32.528951] dump_stack+0xc7/0x13b [ 32.528951] ? show_regs_print_info+0x5/0x5 [ 32.528951] ? __pm_runtime_use_autosuspend+0x140/0x140 [ 32.528951] ubsan_epilogue+0x9/0x49 [ 32.528951] ubsan_type_mismatch_common+0x1f9/0x2c0 [ 32.528951] ? ucs2_as_utf8+0x310/0x310 [ 32.528951] ? device_initialize+0x229/0x2e0 [ 32.528951] __ubsan_handle_type_mismatch+0x9f/0xc9 [ 32.528951] ? __ubsan_handle_divrem_overflow+0x19b/0x19b [ 32.578008] ? ib_device_get_by_index+0xf0/0xf0 [ 32.578008] mlx5_eswitch_mode+0x30/0x40 [ 32.578008] mlx5_ib_add+0x1e0/0x4a0 Fixes: 57cbd893 ("net/mlx5: E-Switch, Move representors definition to a global scope") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com>
-
Eran Ben Elisha authored
Driver is yet to support aRFS for encapsulated packets, return early error in such case. Fixes: 18c908e4 ("net/mlx5e: Add accelerated RFS support") Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by:
-
Eran Ben Elisha authored
Quota should follow the amount of rules which do expire, and not the number of rules that were examined, fixed that. Fixes: 18c908e4 ("net/mlx5e: Add accelerated RFS support") Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Reviewed-by:
-
