- 17 May, 2024 13 commits
-
-
David S. Miller authored
Jiawen Wu says: ==================== Wangxun fixes Fixed some bugs when using ethtool to operate network devices. v4 -> v5: - Simplify if...else... to fix features. v3 -> v4: - Require both ctag and stag to be enabled or disabled. v2 -> v3: - Drop the first patch. v1 -> v2: - Factor out the same code. - Remove statistics printing with more than 64 queues. - Detail the commit logs to describe issues. - Remove reset flag check in wx_update_stats(). - Change to set VLAN CTAG and STAG to be consistent. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jiawen Wu authored
When VLAN tag strip is changed to enable or disable, the hardware requires the Rx ring to be in a disabled state, otherwise the feature cannot be changed. Fixes: f3b03c65 ("net: wangxun: Implement vlan add and kill functions") Signed-off-by:
Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Jiawen Wu authored
Hardware requires VLAN CTAG and STAG configuration always matches. And whether VLAN CTAG or STAG changes, the configuration needs to be changed as well. Fixes: 6670f1ec ("net: txgbe: Add netdev features support") Signed-off-by:
Sai Krishna <saikrishnag@marvell.com> Reviewed-by:
-
Jiawen Wu authored
Fix the issue where some Rx features cannot be changed. When using ethtool -K to turn off rx offload, it returns error and displays "Could not change any device features". And netdev->features is not assigned a new value to actually configure the hardware. Fixes: 6dbedcff ("net: libwx: Implement xx_set_features ops") Signed-off-by:
-
Eric Dumazet authored
trafgen performance considerably sank on hosts with many cores after the blamed commit. packet_read_pending() is very expensive, and calling it in af_packet fast path defeats Daniel intent in commit b0138408 ("packet: use percpu mmap tx frame pending refcount") tpacket_destruct_skb() makes room for one packet, we can immediately wakeup a producer, no need to completely drain the tx ring. Fixes: 89ed5b51 ("af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240515163358.4105915-1-edumazet@google.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Daniel Jurgens authored
The rtnl_lock would stay locked if allocating promisc_allmulti failed. Also changed the allocation to GFP_KERNEL. Fixes: ff7c7d9f ("virtio_net: Remove command data from control_buf") Reported-by:
Eric Dumazet <edumaset@google.com> Link: https://lore.kernel.org/netdev/CANn89iLazVaUCvhPm6RPJJ0owra_oFnx7Fhc8d60gV-65ad3WQ@mail.gmail.com/Signed-off-by:
Daniel Jurgens <danielj@nvidia.com> Reviewed-by:
Brett Creeley <brett.creeley@amd.com> Reviewed-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20240515163125.569743-1-danielj@nvidia.comSigned-off-by:
-
Eric Dumazet authored
syzbot loves netrom, and found a possible deadlock in nr_rt_ioctl [1] Make sure we always acquire nr_node_list_lock before nr_node_lock(nr_node) [1] WARNING: possible circular locking dependency detected 6.9.0-rc7-syzkaller-02147-g654de42f #0 Not tainted ------------------------------------------------------ syz-executor350/5129 is trying to acquire lock: ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_node_lock include/net/netrom.h:152 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:464 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697 but task is already holding lock: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:462 [inline] ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_rt_ioctl+0x10a/0x1090 net/netrom/nr_route.c:697 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (nr_node_list_lock){+...}-{2:2}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_remove_node net/netrom/nr_route.c:299 [inline] nr_del_node+0x4b4/0x820 net/netrom/nr_route.c:355 nr_rt_ioctl+0xa95/0x1090 net/netrom/nr_route.c:683 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (&nr_node->node_lock){+...}-{2:2}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_node_lock include/net/netrom.h:152 [inline] nr_dec_obs net/netrom/nr_route.c:464 [inline] nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(nr_node_list_lock); lock(&nr_node->node_lock); lock(nr_node_list_lock); lock(&nr_node->node_lock); *** DEADLOCK *** 1 lock held by syz-executor350/5129: #0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] #0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_dec_obs net/netrom/nr_route.c:462 [inline] #0: ffffffff8f7053b8 (nr_node_list_lock){+...}-{2:2}, at: nr_rt_ioctl+0x10a/0x1090 net/netrom/nr_route.c:697 stack backtrace: CPU: 0 PID: 5129 Comm: syz-executor350 Not tainted 6.9.0-rc7-syzkaller-02147-g654de42f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_node_lock include/net/netrom.h:152 [inline] nr_dec_obs net/netrom/nr_route.c:464 [inline] nr_rt_ioctl+0x1bb/0x1090 net/netrom/nr_route.c:697 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Michal Schmidt authored
Disabling tcp-data-split on idpf silently fails: # ethtool -G $NETDEV tcp-data-split off # ethtool -g $NETDEV | grep 'TCP data split' TCP data split: on But it works if you also change 'tx' or 'rx': # ethtool -G $NETDEV tcp-data-split off tx 256 # ethtool -g $NETDEV | grep 'TCP data split' TCP data split: off The bug is in idpf_set_ringparam, where it takes a shortcut out if the TX and RX sizes are not changing. Fix it by checking also if the tcp-data-split setting remains unchanged. Only then can the soft reset be skipped. Fixes: 9b1aa3ef ("idpf: add get/set for Ethtool's header split ringparam") Reported-by:
Xu Du <xudu@redhat.com> Closes: https://issues.redhat.com/browse/RHEL-36182Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Reviewed-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20240515092414.158079-1-mschmidt@redhat.comSigned-off-by:
-
Sagar Cheluvegowda authored
On SA8775P, Ethernet DMA controller is coherent with the CPU. allow specifying that. Signed-off-by:
Sagar Cheluvegowda <quic_scheluve@quicinc.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240514-mark_ethernet_devices_dma_coherent-v4-2-04e1198858c5@quicinc.comSigned-off-by:
-
Tony Battersby authored
"rmmod bonding" causes an oops ever since commit cc317ea3 ("bonding: remove redundant NULL check in debugfs function"). Here are the relevant functions being called: bonding_exit() bond_destroy_debugfs() debugfs_remove_recursive(bonding_debug_root); bonding_debug_root = NULL; <--------- SET TO NULL HERE bond_netlink_fini() rtnl_link_unregister() __rtnl_link_unregister() unregister_netdevice_many_notify() bond_uninit() bond_debug_unregister() (commit removed check for bonding_debug_root == NULL) debugfs_remove() simple_recursive_removal() down_write() -> OOPS However, reverting the bad commit does not solve the problem completely because the original code contains a race that could cause the same oops, although it was much less likely to be triggered unintentionally: CPU1 rmmod bonding bonding_exit() bond_destroy_debugfs() debugfs_remove_recursive(bonding_debug_root); CPU2 echo -bond0 > /sys/class/net/bonding_masters bond_uninit() bond_debug_unregister() if (!bonding_debug_root) CPU1 bonding_debug_root = NULL; So do NOT revert the bad commit (since the removed checks were racy anyway), and instead change the order of actions taken during module removal. The same oops can also happen if there is an error during module init, so apply the same fix there. Fixes: cc317ea3 ("bonding: remove redundant NULL check in debugfs function") Cc: stable@vger.kernel.org Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Reviewed-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/641f914f-3216-4eeb-87dd-91b78aa97773@cybernetics.comSigned-off-by:
-
xu xin authored
Problem ========= After commit 67f69513 ("ipv6: Move setting default metric for routes"), we noticed that the logic of assigning the default value of fc_metirc changed in the ioctl process. That is, when users use ioctl(fd, SIOCADDRT, rt) with a non-zero metric to add a route, then they may fail to delete a route with passing in a metric value of 0 to the kernel by ioctl(fd, SIOCDELRT, rt). But iproute can succeed in deleting it. As a reference, when using iproute tools by netlink to delete routes with a metric parameter equals 0, like the command as follows: ip -6 route del fe80::/64 via fe81::5054:ff:fe11:3451 dev eth0 metric 0 the user can still succeed in deleting the route entry with the smallest metric. Root Reason =========== After commit 67f69513 ("ipv6: Move setting default metric for routes"), When ioctl() pass in SIOCDELRT with a zero metric, rtmsg_to_fib6_config() will set a defalut value (1024) to cfg->fc_metric in kernel, and in ip6_route_del() and the line 4074 at net/ipv3/route.c, it will check by if (cfg->fc_metric && cfg->fc_metric != rt->fib6_metric) continue; and the condition is true and skip the later procedure (deleting route) because cfg->fc_metric != rt->fib6_metric. But before that commit, cfg->fc_metric is still zero there, so the condition is false and it will do the following procedure (deleting). Solution ======== In order to keep a consistent behaviour across netlink() and ioctl(), we should allow to delete a route with a metric value of 0. So we only do the default setting of fc_metric in route adding. CC: stable@vger.kernel.org # 5.4+ Fixes: 67f69513 ("ipv6: Move setting default metric for routes") Co-developed-by:
Fan Yu <fan.yu9@zte.com.cn> Signed-off-by:
xu xin <xu.xin16@zte.com.cn> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240514201102055dD2Ba45qKbLlUMxu_DTHP@zte.com.cnSigned-off-by:
-
Hangbin Liu authored
The check_random_order test add/get plenty of xfrm rules, which consume a lot time on debug kernel and always TIMEOUT. Let's reduce the test loop and see if it works. Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240514095227.2597730-1-liuhangbin@gmail.comSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2024-05-17 We've added 7 non-merge commits during the last 2 day(s) which contain a total of 8 files changed, 20 insertions(+), 9 deletions(-). The main changes are: 1) Fix KASAN slab-out-of-bounds in percpu_array_map_gen_lookup and add BPF selftests to cover this case, from Andrii Nakryiko. (Report https://lore.kernel.org/bpf/20240514231155.1004295-1-kuba@kernel.org/) 2) Fix two BPF selftests to adjust for kernel changes after fast-forwarding Linus' tree to make BPF CI all green again, from Martin KaFai Lau. 3) Fix libbpf feature detectors when using token_fd by adjusting the attribute size for memset to cover the former, also from Andrii Nakryiko. 4) Fix the description of 'src' in ALU instructions for the BPF ISA standardization doc, from Puranjay Mohan. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Adjust btf_dump test to reflect recent change in file_operations selftests/bpf: Adjust test_access_variable_array after a kernel function name change selftests/bpf: add more variations of map-in-map situations bpf: save extended inner map info for percpu array maps as well MAINTAINERS: Update ARM64 BPF JIT maintainer bpf, docs: Fix the description of 'src' in ALU instructions libbpf: fix feature detectors when using token_fd ==================== Link: https://lore.kernel.org/r/20240517001600.23703-1-daniel@iogearbox.netSigned-off-by:
-
- 16 May, 2024 5 commits
-
-
Martin KaFai Lau authored
The btf_dump test fails: test_btf_dump_struct_data:FAIL:file_operations unexpected file_operations: actual '(struct file_operations){ .owner = (struct module *)0xffffffffffffffff, .fop_flags = (fop_flags_t)4294967295, .llseek = (loff_t (*)(struct f' != expected '(struct file_operations){ .owner = (struct module *)0xffffffffffffffff, .llseek = (loff_t (*)(struct file *, loff_t, int))0xffffffffffffffff,' The "fop_flags" is a recent addition to the struct file_operations in commit 210a03c9 ("fs: claw back a few FMODE_* bits") This patch changes the test_btf_dump_struct_data() to reflect this change. Signed-off-by:Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/bpf/20240516164310.2481460-1-martin.lau@linux.dev
-
Martin KaFai Lau authored
After commit 4c3e509e ("sched/balancing: Rename load_balance() => sched_balance_rq()"), the load_balance kernel function is renamed to sched_balance_rq. This patch adjusts the fentry program in test_access_variable_array.c to reflect this kernel function name change. Signed-off-by:
-
Hangbin Liu authored
There is no need to add the name to ns_list again if the netns already recoreded. Fixes: 25ae948b ("selftests/net: add lib.sh") Signed-off-by:
-
Chris Lew authored
The qrtr protocol core logic and the qrtr nameservice are combined into a single module. Neither the core logic or nameservice provide much functionality by themselves; combining the two into a single module also prevents any possible issues that may stem from client modules loading inbetween qrtr and the ns. Creating a socket takes two references to the module that owns the socket protocol. Since the ns needs to create the control socket, this creates a scenario where there are always two references to the qrtr module. This prevents the execution of 'rmmod' for qrtr. To resolve this, forcefully put the module refcount for the socket opened by the nameservice. Fixes: a365023a ("net: qrtr: combine nameservice into main module") Reported-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Tested-by:
Chris Lew <quic_clew@quicinc.com> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by:
-
Herve Codina authored
A debugfs directory entry is create early during probe(). This entry is not removed on error path leading to some "already present" issues in case of EPROBE_DEFER. Create this entry later in the probe() code to avoid the need to change many 'return' in 'goto' and add the removal in the already present error path. Fixes: 94281484 ("net: lan966x: Add VCAP debugFS support") Cc: <stable@vger.kernel.org> Signed-off-by:
Herve Codina <herve.codina@bootlin.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
-
- 15 May, 2024 22 commits
-
-
Andrii Nakryiko authored
Add test cases validating usage of PERCPU_ARRAY and PERCPU_HASH maps as inner maps. Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Acked-by:
Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20240515062440.846086-2-andrii@kernel.orgSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
ARRAY_OF_MAPS and HASH_OF_MAPS map types have special logic to save a few extra fields required for correct operations of ARRAY maps, when they are used as inner maps. PERCPU_ARRAY maps have similar requirements as they now support generating inline element lookup logic. So make sure that both classes of maps are handled correctly. Reported-by:
-
Puranjay Mohan authored
Zi Shen Lim is not actively doing kernel development and has decided to tranfer the responsibility of maintaining the JIT to me. Add myself as the maintainer for BPF JIT for ARM64 and remove Zi Shen Lim. Signed-off-by:
Puranjay Mohan <puranjay@kernel.org> Acked-by:
Zi Shen Lim <zlim.lnx@gmail.com> Link: https://lore.kernel.org/r/20240514183914.27737-1-puranjay@kernel.orgSigned-off-by:
-
Puranjay Mohan authored
An ALU instruction's source operand can be the value in the source register or the 32-bit immediate value encoded in the instruction. This is controlled by the 's' bit of the 'opcode'. The current description explicitly uses the phrase 'value of the source register' when defining the meaning of 'src'. Change the description to use 'source operand' in place of 'value of the source register'. Signed-off-by:
Dave Thaler <dthaler1968@gmail.com> Link: https://lore.kernel.org/r/20240514130303.113607-1-puranjay@kernel.orgSigned-off-by:
-
Andrii Nakryiko authored
Adjust `union bpf_attr` size passed to kernel in two feature-detecting functions to take into account prog_token_fd field. Libbpf is avoiding memset()'ing entire `union bpf_attr` by only using minimal set of bpf_attr's fields. Two places have been missed when wiring BPF token support in libbpf's feature detection logic. Fix them trivially. Fixes: f3dcee93 ("libbpf: Wire up token_fd into feature probing logic") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextJakub Kicinski authored
Cross merge. Signed-off-by: -
Ronald Wahl authored
Under some circumstances it may happen that the ks8851 Ethernet driver stops sending data. Currently the interrupt handler resets the interrupt status flags in the hardware after handling TX. With this approach we may lose interrupts in the time window between handling the TX interrupt and resetting the TX interrupt status bit. When all of the three following conditions are true then transmitting data stops: - TX queue is stopped to wait for room in the hardware TX buffer - no queued SKBs in the driver (txq) that wait for being written to hw - hardware TX buffer is empty and the last TX interrupt was lost This is because reenabling the TX queue happens when handling the TX interrupt status but if the TX status bit has already been cleared then this interrupt will never come. With this commit the interrupt status flags will be cleared before they are handled. That way we stop losing interrupts. The wrong handling of the ISR flags was there from the beginning but with commit 3dc5d445 ("net: ks8851: Fix TX stall caused by TX buffer overrun") the issue becomes apparent. Fixes: 3dc5d445 ("net: ks8851: Fix TX stall caused by TX buffer overrun") Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Simon Horman <horms@kernel.org> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org # 5.10+ Signed-off-by:
Ronald Wahl <ronald.wahl@raritan.com> Reviewed-by:
-
Nikolay Aleksandrov authored
syzbot reported a suspicious rcu usage[1] in bridge's mst code. While fixing it I noticed that nothing prevents a vlan to be freed while walking the list from the same path (br forward delay timer). Fix the rcu usage and also make sure we are not accessing freed memory by making br_mst_vlan_set_state use rcu read lock. [1] WARNING: suspicious RCU usage 6.9.0-rc6-syzkaller #0 Not tainted ----------------------------- net/bridge/br_private.h:1599 suspicious rcu_dereference_protected() usage! ... stack backtrace: CPU: 1 PID: 8017 Comm: syz-executor.1 Not tainted 6.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nbp_vlan_group net/bridge/br_private.h:1599 [inline] br_mst_set_state+0x1ea/0x650 net/bridge/br_mst.c:105 br_set_state+0x28a/0x7b0 net/bridge/br_stp.c:47 br_forward_delay_timer_expired+0x176/0x440 net/bridge/br_stp_timer.c:88 call_timer_fn+0x18e/0x650 kernel/time/timer.c:1793 expire_timers kernel/time/timer.c:1844 [inline] __run_timers kernel/time/timer.c:2418 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2429 run_timer_base kernel/time/timer.c:2438 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2448 __do_softirq+0x2c6/0x980 kernel/softirq.c:554 invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf2/0x1c0 kernel/softirq.c:633 irq_exit_rcu+0x9/0x30 kernel/softirq.c:645 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 RIP: 0010:lock_acquire+0x264/0x550 kernel/locking/lockdep.c:5758 Code: 2b 00 74 08 4c 89 f7 e8 ba d1 84 00 f6 44 24 61 02 0f 85 85 01 00 00 41 f7 c7 00 02 00 00 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 25 00 00 00 00 00 43 c7 44 25 09 00 00 00 00 43 c7 44 25 RSP: 0018:ffffc90013657100 EFLAGS: 00000206 RAX: 0000000000000001 RBX: 1ffff920026cae2c RCX: 0000000000000001 RDX: dffffc0000000000 RSI: ffffffff8bcaca00 RDI: ffffffff8c1eaa60 RBP: ffffc90013657260 R08: ffffffff92efe507 R09: 1ffffffff25dfca0 R10: dffffc0000000000 R11: fffffbfff25dfca1 R12: 1ffff920026cae28 R13: dffffc0000000000 R14: ffffc90013657160 R15: 0000000000000246 Fixes: ec7328b5 ("net: bridge: mst: Multiple Spanning Tree (MST) mode") Reported-by: syzbot+fa04eb8a56fd923fc5d8@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=fa04eb8a56fd923fc5d8Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by:
-
Nikolay Aleksandrov authored
When running the bridge IGMP/MLD selftests on debug kernels we can get spurious errors when setting up the IGMP/MLD exclude timeout tests because the membership interval is just 3 seconds and the setup has 2 seconds of sleep plus various validations, the one second that is left is not enough. Increase the membership interval from 3 to 5 seconds to make room for the setup validation and 2 seconds of sleep. Fixes: 34d7ecb3 ("selftests: net: bridge: update IGMP/MLD membership interval value") Reported-by:
-
Nikolay Aleksandrov authored
syzbot triggered an uninit value[1] error in bridge device's xmit path by sending a short (less than ETH_HLEN bytes) skb. To fix it check if we can actually pull that amount instead of assuming. Tested with dropwatch: drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3) origin: software timestamp: Mon May 13 11:31:53 2024 778214037 nsec protocol: 0x88a8 length: 2 original length: 2 drop reason: PKT_TOO_SMALL [1] BUG: KMSAN: uninit-value in br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x34db/0x5350 net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] __bpf_tx_skb net/core/filter.c:2136 [inline] __bpf_redirect_common net/core/filter.c:2180 [inline] __bpf_redirect+0x14a6/0x1620 net/core/filter.c:2187 ____bpf_clone_redirect net/core/filter.c:2460 [inline] bpf_clone_redirect+0x328/0x470 net/core/filter.c:2432 ___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997 __bpf_prog_run512+0xb5/0xe0 kernel/bpf/core.c:2238 bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline] __bpf_prog_run include/linux/filter.h:657 [inline] bpf_prog_run include/linux/filter.h:664 [inline] bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425 bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058 bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5678 __do_sys_bpf kernel/bpf/syscall.c:5767 [inline] __se_sys_bpf kernel/bpf/syscall.c:5765 [inline] __x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765 x64_sys_call+0x96b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+a63a1f6a062033cf0f40@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=a63a1f6a062033cf0f40Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Jakub Kicinski: "Core & protocols: - Complete rework of garbage collection of AF_UNIX sockets. AF_UNIX is prone to forming reference count cycles due to fd passing functionality. New method based on Tarjan's Strongly Connected Components algorithm should be both faster and remove a lot of workarounds we accumulated over the years. - Add TCP fraglist GRO support, allowing chaining multiple TCP packets and forwarding them together. Useful for small switches / routers which lack basic checksum offload in some scenarios (e.g. PPPoE). - Support using SMP threads for handling packet backlog i.e. packet processing from software interfaces and old drivers which don't use NAPI. This helps move the processing out of the softirq jumble. - Continue work of converting from rtnl lock to RCU protection. Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link information available via rtnetlink. - Small optimizations from Eric to UDP wake up handling, memory accounting, RPS/RFS implementation, TCP packet sizing etc. - Allow direct page recycling in the bulk API used by XDP, for +2% PPS. - Support peek with an offset on TCP sockets. - Add MPTCP APIs for querying last time packets were received/sent/acked and whether MPTCP "upgrade" succeeded on a TCP socket. - Add intra-node communication shortcut to improve SMC performance. - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver. - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver. - Add reset reasons for tracing what caused a TCP reset to be sent. - Introduce direction attribute for xfrm (IPSec) states. State can be used either for input or output packet processing. Things we sprinkled into general kernel code: - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS(). This required touch-ups and renaming of a few existing users. - Add Endian-dependent __counted_by_{le,be} annotations. - Make building selftests "quieter" by printing summaries like "CC object.o" rather than full commands with all the arguments. Netfilter: - Use GFP_KERNEL to clone elements, to deal better with OOM situations and avoid failures in the .commit step. BPF: - Add eBPF JIT for ARCv2 CPUs. - Support attaching kprobe BPF programs through kprobe_multi link in a session mode, meaning, a BPF program is attached to both function entry and return, the entry program can decide if the return program gets executed and the entry program can share u64 cookie value with return program. "Session mode" is a common use-case for tetragon and bpftrace. - Add the ability to specify and retrieve BPF cookie for raw tracepoint programs in order to ease migration from classic to raw tracepoints. - Add an internal-only BPF per-CPU instruction for resolving per-CPU memory addresses and implement support in x86, ARM64 and RISC-V JITs. This allows inlining functions which need to access per-CPU state. - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various atomics in bpf_arena which can be JITed as a single x86 instruction. Support BPF arena on ARM64. - Add a new bpf_wq API for deferring events and refactor process-context bpf_timer code to keep common code where possible. - Harden the BPF verifier's and/or/xor value tracking. - Introduce crypto kfuncs to let BPF programs call kernel crypto APIs. - Support bpf_tail_call_static() helper for BPF programs with GCC 13. - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF program to have code sections where preemption is disabled. Driver API: - Skip software TC processing completely if all installed rules are marked as HW-only, instead of checking the HW-only flag rule by rule. - Add support for configuring PoE (Power over Ethernet), similar to the already existing support for PoDL (Power over Data Line) config. - Initial bits of a queue control API, for now allowing a single queue to be reset without disturbing packet flow to other queues. - Common (ethtool) statistics for hardware timestamping. Tests and tooling: - Remove the need to create a config file to run the net forwarding tests so that a naive "make run_tests" can exercise them. - Define a method of writing tests which require an external endpoint to communicate with (to send/receive data towards the test machine). Add a few such tests. - Create a shared code library for writing Python tests. Expose the YAML Netlink library from tools/ to the tests for easy Netlink access. - Move netfilter tests under net/, extend them, separate performance tests from correctness tests, and iron out issues found by running them "on every commit". - Refactor BPF selftests to use common network helpers. - Further work filling in YAML definitions of Netlink messages for: nftables, team driver, bonding interfaces, vlan interfaces, VF info, TC u32 mark, TC police action. - Teach Python YAML Netlink to decode attribute policies. - Extend the definition of the "indexed array" construct in the specs to cover arrays of scalars rather than just nests. - Add hyperlinks between definitions in generated Netlink docs. Drivers: - Make sure unsupported flower control flags are rejected by drivers, and make more drivers report errors directly to the application rather than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen). - Ethernet high-speed NICs: - Broadcom (bnxt): - support multiple RSS contexts and steering traffic to them - support XDP metadata - make page pool allocations more NUMA aware - Intel (100G, ice, idpf): - extract datapath code common among Intel drivers into a library - use fewer resources in switchdev by sharing queues with the PF - add PFCP filter support - add Ethernet filter support - use a spinlock instead of HW lock in PTP clock ops - support 5 layer Tx scheduler topology - nVidia/Mellanox: - 800G link modes and 100G SerDes speeds - per-queue IRQ coalescing configuration - Marvell Octeon: - support offloading TC packet mark action - Ethernet NICs consumer, embedded and virtual: - stop lying about skb->truesize in USB Ethernet drivers, it messes up TCP memory calculations - Google cloud vNIC: - support changing ring size via ethtool - support ring reset using the queue control API - VirtIO net: - expose flow hash from RSS to XDP - per-queue statistics - add selftests - Synopsys (stmmac): - support controllers which require an RX clock signal from the MII bus to perform their hardware initialization - TI: - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices - icssg_prueth: add SW TX / RX Coalescing based on hrtimers - cpsw: minimal XDP support - Renesas (ravb): - support describing the MDIO bus - Realtek (r8169): - add support for RTL8168M - Microchip Sparx5: - matchall and flower actions mirred and redirect - Ethernet switches: - nVidia/Mellanox: - improve events processing performance - Marvell: - add support for MV88E6250 family internal PHYs - Microchip: - add DCB and DSCP mapping support for KSZ switches - vsc73xx: convert to PHYLINK - Realtek: - rtl8226b/rtl8221b: add C45 instances and SerDes switching - Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup - Ethernet PHYs: - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY. - micrel: lan8814: add support for PPS out and external timestamp trigger - WiFi: - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers. Modern devices can only be configured using nl80211. - mac80211/cfg80211 - handle color change per link for WiFi 7 Multi-Link Operation - Intel (iwlwifi): - don't support puncturing in 5 GHz - support monitor mode on passive channels - BZ-W device support - P2P with HE/EHT support - re-add support for firmware API 90 - provide channel survey information for Automatic Channel Selection - MediaTek (mt76): - mt7921 LED control - mt7925 EHT radiotap support - mt7920e PCI support - Qualcomm (ath11k): - P2P support for QCA6390, WCN6855 and QCA2066 - support hibernation - ieee80211-freq-limit Device Tree property support - Qualcomm (ath12k): - refactoring in preparation of multi-link support - suspend and hibernation support - ACPI support - debugfs support, including dfs_simulate_radar support - RealTek: - rtw88: RTL8723CS SDIO device support - rtw89: RTL8922AE Wi-Fi 7 PCI device support - rtw89: complete features of new WiFi 7 chip 8922AE including BT-coexistence and Wake-on-WLAN - rtw89: use BIOS ACPI settings to set TX power and channels - rtl8xxxu: enable Management Frame Protection (MFP) support - Bluetooth: - support for Intel BlazarI and Filmore Peak2 (BE201) - support for MediaTek MT7921S SDIO - initial support for Intel PCIe BT driver - remove HCI_AMP support" * tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits) selftests: netfilter: fix packetdrill conntrack testcase net: gro: fix napi_gro_cb zeroed alignment Bluetooth: btintel_pcie: Refactor and code cleanup Bluetooth: btintel_pcie: Fix warning reported by sparse Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1 Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config Bluetooth: btintel_pcie: Fix compiler warnings Bluetooth: btintel_pcie: Add *setup* function to download firmware Bluetooth: btintel_pcie: Add support for PCIe transport Bluetooth: btintel: Export few static functions Bluetooth: HCI: Remove HCI_AMP support Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() Bluetooth: qca: Fix error code in qca_read_fw_build_info() Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning Bluetooth: btintel: Add support for Filmore Peak2 (BE201) Bluetooth: btintel: Add support for BlazarI LE Create Connection command timeout increased to 20 secs dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth Bluetooth: compute LE flow credits based on recvbuf space Bluetooth: hci_sync: Use cmd->num_cis instead of magic number ... -
Linus Torvalds authored
Merge tag 'firewire-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Takashi Sakamoto: "During the development period of v6.8 kernel, it became evident that there was a lack of helper utilities to trace the initial state of bus, while investigating certain PHYs compliant with different versions of IEEE 1394 specification. This series of changes includes the addition of tracepoints events, provided by 'firewire' subsystem. These events enable tracing of how firewire core functions during bus reset and asynchronous communication over IEEE 1394 bus. When implementing the tracepoints events, it was found that the existing serialization and deserialization helpers for several types of asynchronous packets are scattered across both firewire-core and firewire-ohci kernel modules. A set of inline functions is newly added to address it, along with some KUnit tests, serving as the foundation for the tracepoints events. This renders the dispersed code obsolete. The remaining changes constitute the final steps in phasing out the usage of deprecated PCI MSI APIs, in continuation from the previous version" * tag 'firewire-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (29 commits) firewire: obsolete usage of *-objs in Makefile for KUnit test firewire: core: remove flag and width from u64 formats of tracepoints events firewire: core: fix type of timestamp for async_inbound_template tracepoints events firewire: core: add tracepoint event for handling bus reset Revert "firewire: core: option to log bus reset initiation" firewire: core: add tracepoints events for initiating bus reset firewire: ohci: obsolete OHCI_PARAM_DEBUG_BUSRESETS from debug module parameter firewire: ohci: add bus-reset event for initial set of handled irq firewire: core: add tracepoints event for asynchronous inbound phy packet firewire: core/cdev: add tracepoints events for asynchronous phy packet firewire: core: add tracepoints events for asynchronous outbound response firewire: core: add tracepoint event for asynchronous inbound request firewire: core: add tracepoints event for asynchronous inbound response firewire: core: add tracepoints events for asynchronous outbound request firewire: core: add support for Linux kernel tracepoints firewire: core: replace local macros with common inline functions for isochronous packet header firewire: core: add common macro to serialize/deserialize isochronous packet header firewire: core: obsolete tcode check macros with inline functions firewire: ohci: replace hard-coded values with common macros firewire: ohci: replace hard-coded values with inline functions for asynchronous packet header ...
-
Linus Torvalds authored
Merge tag 'for-6.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Add a dm-crypt optional "high_priority" flag that enables the crypt workqueues to use WQ_HIGHPRI. - Export dm-crypt workqueues via sysfs (by enabling WQ_SYSFS) to allow for improved visibility and controls over IO and crypt workqueues. - Fix dm-crypt to no longer constrain max_segment_size to PAGE_SIZE. This limit isn't needed given that the block core provides late bio splitting if bio exceeds underlying limits (e.g. max_segment_size). - Fix dm-crypt crypt_queue's use of WQ_UNBOUND to not use WQ_CPU_INTENSIVE because it is meaningless with WQ_UNBOUND. - Fix various issues with dm-delay target (ranging from a resource teardown fix, a fix for hung task when using kthread mode, and other improvements that followed from code inspection). * tag 'for-6.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm-delay: remove timer_lock dm-delay: change locking to avoid contention dm-delay: fix max_delay calculations dm-delay: fix hung task introduced by kthread mode dm-delay: fix workqueue delay_timer race dm-crypt: don't set WQ_CPU_INTENSIVE for WQ_UNBOUND crypt_queue dm: use queue_limits_set dm-crypt: stop constraining max_segment_size to PAGE_SIZE dm-crypt: export sysfs of all workqueues dm-crypt: add the optional "high_priority" flag
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas). The major update (which causes a conflict with block, see below) is Christoph removing the queue limits and their associated block helpers. The remaining patches are assorted minor fixes and deprecated function updates plus a bit of constification" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) scsi: mpi3mr: Sanitise num_phys scsi: lpfc: Copyright updates for 14.4.0.2 patches scsi: lpfc: Update lpfc version to 14.4.0.2 scsi: lpfc: Add support for 32 byte CDBs scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading scsi: lpfc: Update logging of protection type for T10 DIF I/O scsi: lpfc: Change default logging level for unsolicited CT MIB commands scsi: target: Remove unused list 'device_list' scsi: iscsi: Remove unused list 'connlist_err' scsi: ufs: exynos: Add support for Tensor gs101 SoC scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata scsi: ufs: exynos: Allow max frequencies up to 267Mhz scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option scsi: ufs: dt-bindings: exynos: Add gs101 compatible scsi: qla2xxx: Fix debugfs output for fw_resource_count scsi: qedf: Ensure the copied buf is NUL terminated scsi: bfa: Ensure the copied buf is NUL terminated ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linuxLinus Torvalds authored
Pull ata updates from Damien Le Moal: - Convert the bindings for the imx-pata and ahci-da850 drivers to DT schemas (from Animesh) - Correct the code to handle HAS_IOPORT dependencies and conditionally compile drivers as needed (from Niklas) - Correct the legacy_exit() function in the pata_legacy driver to properly handle cleanups on driver exit (from Sergey) - Small code simplification removing the ata_exec_internal_sg() function and folding it into its only caller (from me) * tag 'ata-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: pata_legacy: make legacy_exit() work again ata: libata-core: Remove ata_exec_internal_sg() ata: add HAS_IOPORT dependencies dt-bindings: ata: ahci-da850: Convert to dtschema dt-bindings: ata: imx-pata: Convert to dtschema
-
git://git.kernel.org/pub/scm/fs/fsverity/linuxLinus Torvalds authored
Pull fsverity update from Eric Biggers: "Fix a false positive kmemleak warning" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux: fsverity: use register_sysctl_init() to avoid kmemleak warning
-
git://git.kernel.org/pub/scm/fs/fscrypt/linuxLinus Torvalds authored
Pull fscrypt update from Eric Biggers: "Improve the performance of opening unencrypted files on filesystems that support fscrypt" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux: fscrypt: try to avoid refing parent dentry in fscrypt_file_open
-
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linuxLinus Torvalds authored
Pull orangefs update from Mike Marshall: "Fix out-of-bounds fsid access. Small fix to quiet warnings from string fortification helpers, suggested by Arnd Bergmann" * tag 'for-linus-6.10-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: fix out-of-bounds fsid access
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 updates from Andreas Gruenbacher: - Properly fix the glock shrinker this time: it broke in commit "gfs2: Make glock lru list scanning safer" and commit "gfs2: fix glock shrinker ref issues" wasn't actually enough to fix it - On unmount, keep glocks around long enough that no more dlm callbacks can occur on them - Some more folio conversion patches from Matthew Wilcox - Lots of other smaller fixes and cleanups * tag 'gfs2-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (27 commits) gfs2: make timeout values more explicit gfs2: Convert gfs2_aspace_writepage() to use a folio gfs2: Add a migrate_folio operation for journalled files gfs2: Simplify gfs2_read_super gfs2: Convert gfs2_page_mkwrite() to use a folio gfs2: gfs2_freeze_unlock cleanup gfs2: Remove and replace gfs2_glock_queue_work gfs2: do_xmote fixes gfs2: finish_xmote cleanup gfs2: Unlock fewer glocks on unmount gfs2: Fix potential glock use-after-free on unmount gfs2: Remove ill-placed consistency check gfs2: Fix lru_count accounting gfs2: Fix "Make glock lru list scanning safer" Revert "gfs2: fix glock shrinker ref issues" gfs2: Fix "ignore unlock failures after withdraw" gfs2: Get rid of unnecessary test_and_set_bit gfs2: Don't set GLF_LOCK in gfs2_dispose_glock_lru gfs2: Replace gfs2_glock_queue_put with gfs2_glock_put_async gfs2: Get rid of gfs2_glock_queue_put in signal_our_withdraw ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlmLinus Torvalds authored
Pull dlm updates from David Teigland: "This set includes some small fixes, and some big internal changes: - Fix a long standing race between the unlock callback for the last lkb struct, and removing the rsb that became unused after the final unlock. This could lead different nodes to inconsistent info about the rsb master node. - Remove unnecessary refcounting on callback structs, returning to the way things were done in the past. - Do message processing in softirq context. This allows dlm messages to be cleared more quickly and efficiently, reducing long lists of incomplete requests. A future change to run callbacks directly from this context will make this more effective. - The softirq message processing involved a number of patches changing mutexes to spinlocks and rwlocks, and a fair amount of code re-org in preparation. - Use an rhashtable for rsb structs, rather than our old internal hash table implementation. This also required some re-org of lists and locks preparation for the change. - Drop the dlm_scand kthread, and use timers to clear unused rsb structs. Scanning all rsb's periodically was a lot of wasted work. - Fix recent regression in logic for copying LVB data in user space lock requests" * tag 'dlm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (34 commits) dlm: return -ENOMEM if ls_recover_buf fails dlm: fix sleep in atomic context dlm: use rwlock for lkbidr dlm: use rwlock for rsb hash table dlm: drop dlm_scand kthread and use timers dlm: do not use ref counts for rsb in the toss state dlm: switch to use rhashtable for rsbs dlm: add rsb lists for iteration dlm: merge toss and keep hash table lists into one list dlm: change to single hashtable lock dlm: increment ls_count for dlm_scand dlm: do message processing in softirq context dlm: use spin_lock_bh for message processing dlm: remove schedule in receive path dlm: convert ls_recv_active from rw_semaphore to rwlock dlm: avoid blocking receive at the end of recovery dlm: convert res_lock to spinlock dlm: convert ls_waiters_mutex to spinlock dlm: drop mutex use in waiters recovery dlm: add new struct to save position in dlm_copy_master_names ... -
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "This update brings a few minor performance improvements, otherwise there's a lot of refactoring, cleanups and other sort of not user visible changes. Performance improvements: - inline b-tree locking functions, improvement in metadata-heavy changes - relax locking on a range that's being reflinked, allows read operations to run in parallel - speed up NOCOW write checks (throughput +9% on a sample test) - extent locking ranges have been reduced in several places, namely around delayed ref processing Core: - more page to folio conversions: - relocation - send - compression - inline extent handling - super block write and wait - extent_map structure optimizations: - reduced structure size - code simplifications - add shrinker for allocated objects, the numbers can go high and could exhaust memory on smaller systems (reported) as they may not get an opportunity to be freed fast enough - extent locking optimizations: - reduce locking ranges where it does not seem to be necessary and are safe due to other means of synchronization - potential improvements due to lower contention, allocation/freeing and state management operations of extent state tracking structures - delayed ref cleanups and simplifications - updated trace points - improved error handling, warnings and assertions - cleanups and refactoring, unification of error handling paths" * tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (122 commits) btrfs: qgroup: fix initialization of auto inherit array btrfs: count super block write errors in device instead of tracking folio error state btrfs: use the folio iterator in btrfs_end_super_write() btrfs: convert super block writes to folio in write_dev_supers() btrfs: convert super block writes to folio in wait_dev_supers() bio: Export bio_add_folio_nofail to modules btrfs: remove duplicate included header from fs.h btrfs: add a cached state to extent_clear_unlock_delalloc btrfs: push extent lock down in submit_one_async_extent btrfs: push lock_extent down in cow_file_range() btrfs: move can_cow_file_range_inline() outside of the extent lock btrfs: push lock_extent into cow_file_range_inline btrfs: push extent lock into cow_file_range btrfs: push extent lock into run_delalloc_cow btrfs: remove unlock_extent from run_delalloc_compressed btrfs: push extent lock down in run_delalloc_nocow btrfs: adjust while loop condition in run_delalloc_nocow btrfs: push extent lock into run_delalloc_nocow btrfs: push the extent lock into btrfs_run_delalloc_range btrfs: lock extent when doing inline extent in compression ... -
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofsLinus Torvalds authored
Pull erofs updates from Gao Xiang: "The LZ4 global buffer count is now configurable instead of the previous per-CPU buffers, which is useful for bare metals with hundreds of CPUs. A reserved buffer pool for LZ4 decompression can also be enabled to minimize the tail allocation latencies under the low memory scenarios with heavy memory pressure. In addition, Zstandard algorithm is now supported as an alternative since it has been requested by users for a while. There are some random cleanups as usual. Summary: - Make LZ4 global buffers configurable instead of per-CPU buffers - Add a reserved buffer pool for LZ4 decompression for lower latencies - Support Zstandard compression algorithm as an alternative - Derive fsid from on-disk UUID for .statfs() if possible - Minor cleanups" * tag 'erofs-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: Zstandard compression support erofs: clean up z_erofs_load_full_lcluster() erofs: derive fsid from on-disk UUID for .statfs() if possible erofs: add a reserved buffer pool for lz4 decompression erofs: do not use pagepool in z_erofs_gbuf_growsize() erofs: rename per-CPU buffers to global buffer pool and make it configurable erofs: rename utils.c to zutil.c
-
