- 18 Feb, 2008 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Fix possible array overrun RDMA/nes: Fix VLAN support RDMA/nes: Fix MAC interrupt erroneously masked on ifdown IB: Fix return value in ib_device_register_sysfs()
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: fix lguest build failure x86: reenable support for system without on node0 x86: CPA: avoid double checking of alias ranges x86: CPA no alias checking for _NX x86: zap invalid and unused pmds in early boot x86: CPA, fix alias checks
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (59 commits) V4L/DVB (7219): zoran: Fix namespace conflicts with Zoran 'GPIO_MAX' enum V4L/DVB (7205): tuner-xc2028 depends on FW_LOADER V4L/DVB (7201): cx88-mpeg: Fix race condition in variable access V4L/DVB (7200): Fix FM firmware loading V4L/DVB (7198): V4L, include ioctl.h in videodev headers V4L/DVB (7197): bttv: Fix overlay divide error V4L/DVB (7195): xc5000: fix build error when built as module V4L/DVB (7194): cx88-mpeg: Allow concurrent access to cx88-mpeg devices V4L/DVB (7193): tveeprom: Add proper tuner mapping for hauppauge eeprom id 133 V4L/DVB (7192): Adds support for Genius TVGo A11MCE V4L/DVB (7189): autosuspend support V4L/DVB (7188): radio-si470x version 1.0.6 V4L/DVB (7186): tda10086: make the 22kHz tone for DISEQC a config option V4L/DVB (7183): radio-si470x: fix build warning V4L/DVB (7180): em28xx: add URB_NO_TRANSFER_DMA_MAP, since urb->transfer_dma is set V4L/DVB (7179): Allow more than one em28xx board V4L/DVB (7164): em28xx-alsa: Add a missing mutex V4L/DVB (7163): em28xx: makes audio settings more stable V4L/DVB (7162): em28xx: Fix endian and returns the correct values V4L/DVB (7161): em28xx: Fix printing debug values higher than 127 ...
-
git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds authored
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Added quota targets and removed dmapi directory [XFS] Fix up xfs out-of-tree builds. (a.k.a. external modules) [XFS] Remove Makefile wrappers in XFS
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] null: Add missing Kconfig dependency on BLKCIPHER [CRYPTO] tcrypt: Add missing Kconfig dependency on BLKCIPHER [HIFN]: Fix invalid config ifdefs for RNG support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrtLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt: timer_list: print relative expiry time signed
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kbuild: explain why DEBUG_SECTION_MISMATCH is UNDEFINED kbuild: fix building vmlinux.o kbuild: allow -fstack-protector to take effect kconfig: fix select in combination with default
-
Rusty Russell authored
drivers/lguest/x86/switcher_32.S:(.text+0x3815f8): undefined reference to `LGUEST_PAGES_regs_trapnum' This problem was caused by asm-offsets.c only having the offsets when lguest *guest* support was set, not lguest host (host support used to imply guest support, so now they're separate these bugs come out). Lguest guest support and host support are separate config options: they used to be tied together. Sort out which parts of asm-offsets are needed for Guest and Host. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Yinghai Lu authored
One system doesn't have RAM for node0 installed. SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 1 -> APIC 2 -> Node 1 SRAT: PXM 1 -> APIC 3 -> Node 1 SRAT: Node 1 PXM 1 0-a0000 SRAT: Node 1 PXM 1 0-dd000000 SRAT: Node 1 PXM 1 0-123000000 ACPI: SLIT: nodes = 2 10 13 13 10 mapped APIC to ffffffffff5fb000 ( fee00000) Bootmem setup node 1 0000000000000000-0000000123000000 NODE_DATA [000000000000e000 - 0000000000014fff] bootmap [0000000000015000 - 00000000000395ff] pages 25 Could not find start_pfn for node 0 Pid: 0, comm: swapper Not tainted 2.6.24-smp-g5a514e21-dirty #14 Call Trace: [<ffffffff80bab498>] free_area_init_node+0x22/0x381 [<ffffffff8045ffc5>] generic_swap+0x0/0x17 [<ffffffff80bab0cc>] find_zone_movable_pfns_for_nodes+0x54/0x271 [<ffffffff80baba5f>] free_area_init_nodes+0x239/0x287 [<ffffffff80ba6311>] paging_init+0x46/0x4c [<ffffffff80b9dda5>] setup_arch+0x3c3/0x44e [<ffffffff80b978be>] start_kernel+0x6f/0x2c7 [<ffffffff80b971cc>] _sinittext+0x1cc/0x1d3 This happens because node 0 is not online, but the node state in mm/page_alloc.c has node 0 set. nodemask_t node_states[NR_NODE_STATES] __read_mostly = { [N_POSSIBLE] = NODE_MASK_ALL, [N_ONLINE] = { { [0] = 1UL } }, So we need to clear node_online_map before initializing the memory. Signed-off-by:Yinghai Lu <yinghai.lu@sun.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Thomas Gleixner authored
When the CPA code is called with an virtual address in the range of the direct mapping or the high alias then we do not need to run through the alias check for this range. Signed-off-by:
-
Thomas Gleixner authored
NX settings are not required to be consistent across alias mappings. Signed-off-by:
-
Thomas Gleixner authored
The early boot code maps KERNEL_TEXT_SIZE (currently 40MB) starting from __START_KERNEL_map. The kernel itself only needs _text to _end mapped in the high alias. On relocatible kernels the ASM setup code adjusts the compile time created high mappings to the relocation. This creates invalid pmd entries for negative offsets: 0xffffffff80000000 -> pmd entry: ffffffffff2001e3 It points outside of the physical address space and is marked present. This starts at the virtual address __START_KERNEL_map and goes up to the point where the first valid physical address (0x0) is mapped. Zap the mappings before _text and after _end right away in early boot. This removes also the invalid entries. Furthermore it simplifies the range check for high aliases. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Thomas Gleixner authored
c_p_a() did not discover all aliases correctly. (such as when called on vmalloc()-ed areas or ioremap()-ed areas) Push the alias checks to the lower, physical level and consistently discover all aliases that might exist: the low direct mappings and the high linear kernel-text mappings (on 64-bit). Thanks to Andi Kleen for pointing out that this was buggy. Signed-off-by:
-
Roland Dreier authored
In nes_create_qp(), the test if (nesqp->mmap_sq_db_index > NES_MAX_USER_WQ_REGIONS) { is used to error out if the db_index is too large; however, if the test doesn't trigger, then the index is used as nes_ucontext->mmap_nesqp[nesqp->mmap_sq_db_index] = nesqp; and mmap_nesqp is declared as struct nes_qp *mmap_nesqp[NES_MAX_USER_WQ_REGIONS]; which leads to an array overrun if the index is exactly equal to NES_MAX_USER_WQ_REGIONS. Fix this by bailing out if the index is greater than or equal to NES_MAX_USER_WQ_REGIONS. This was spotted by the Coverity checker (CID 2162). Acked-by:Glenn Streiff <gstreiff@neteffect.com> Signed-off-by:
Roland Dreier <rolandd@cisco.com>
-
Mauro Carvalho Chehab authored
Thanks to Martin Michlmayr <tbm@cyrius.com> for reporting this issue: The zoran driver fails to compile on the ARM Orion platform with: In file included from drivers/media/video/zoran_procfs.c:50: drivers/media/video/zoran.h:232: error: expected identifier before numeric constant The reason is that drivers/media/video/zoran.h defines an enum with GPIO_MAX in it, but Orion contains a #define GPIO_MAX 32 in include/asm-arm/arch-orion/orion.h Signed-off-by:Mauro Carvalho Chehab <mchehab@infradead.org>
-
Paul Mundt authored
Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Ricardo Cerqueira authored
There was a possible race condition in the increment/decrement of the active device references counter. Thanks to Trent Piepho (xyzzy@speakeasy.org) for bringing it up. Signed-off-by:
Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
There's no need to load SCode table for FM. Signed-off-by: -
Jiri Slaby authored
Fix compilation of user processes which includes videodev*.h but not includes linux/ioctl.h: v4l2ext_helper.c: In function 'process_ioctl': v4l2ext_helper.c:183: warning: implicit declaration of function '_IOWR' v4l2ext_helper.c:183: error: expected expression before 'struct' v4l2ext_helper.c:183: error: case label does not reduce to an integer constant Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Robert Fitzsimons authored
The initial work to convert the bttv driver to V4L2 "Partial conversion from V4L1 to V4L2" (e84619b1), missed the line which set the appropriate overlay crop structure in the newly allocated bttv_buffer. This then causes a divide error in the bttv_calc_geo function. Signed-off-by:
Robert Fitzsimons <robfitz@273k.net> Signed-off-by:
-
Tony Breeds authored
drivers/built-in.o: In function `set_type': tuner-core.c:(.text+0x8879d): undefined reference to `xc5000_attach' Signed-off-by:
Tony Breeds <tony@bakeyournoodle.com> Reviewed-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Roland Stoll authored
It currently isn't possible to open the frontend device of cx88-mpeg devices (DVB or Blackbird) multiple times concurrently. (for instance, to attach a signal monitoring tool while reading a stream, or to send a frequency change ioctl) This patch fixes that condition. Signed-off-by:
Roland Stoll <roland@xindex.de> Signed-off-by:
-
Ricardo Cerqueira authored
Do away with the need to set tuner=63 on cx88xx with recent HVR-1300 boards Signed-off-by:
-
Adrian Pardini authored
Signed-off-by:
Adrian Pardini <pardo.bsso@gmail.com> Signed-off-by:
-
Tobias Lorenz authored
Together with Oliver Neukum from Novell, USB autosuspend support was added. Signed-off-by:
Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by:
-
Tobias Lorenz authored
This patch combines all the finished discussions and its resulting patches from the mailing list. The version 1.0.6 is mainly influenced by Oliver Neukum. He found a lot of small issues, that are fixed with this patch now. For me the most interesting thing is, that it's now safer to use it on other architectures. The history for version 1.0.6 is: - fixed coverity checker warnings in *_usb_driver_disconnect - probe()/open() race by correct ordering in probe() - DMA coherency rules by separate allocation of all buffers - use of endianness macros - abuse of spinlock, replaced by mutex - racy handling of timer in disconnect, replaced by delayed_work - racy interruptible_sleep_on(), replaced with wait_event_interruptible() - handle signals in read() The driver is tested with all Debian/testing radio programs and rdsd. The patch is tested against checkpatch.pl v1.12. Signed-off-by:
-
Hartmut Hackmann authored
Some cards need the diseqc signal modulated, while some just need the envelope to control the LNB supply. This fixes Bug 9887 Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Acked-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Michael Krufky authored
fix the following build warning: radio-si470x.c: In function 'si470x_get_rds_registers': radio-si470x.c:562: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int' Signed-off-by:
-
Mauro Carvalho Chehab authored
Thanks to Alan Stern <stern@rowland.harvard.edu> for pointing this issue. Signed-off-by: -
Mauro Carvalho Chehab authored
em28xx driver is capable of handling more than one usb device. However, isoc transfers require a large amount of data to be transfered. Before this patch, just one em28xx board were enough to allocate more than 50% URBs: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc=480/800 us (60%), #Int= 0, #Iso= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 So, only one board could use an USB host at the same time. After the patch, it is possible to use more than one em28xx at the same time, on the same usb host, if the image size is slower or equal to 345600, since those images will require about 30% of the URBs: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc=232/800 us (29%), #Int= 0, #Iso= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 So, in thesis, after the patch, it would be possible to use up to 3 boards by each usb host, if the devices are generating small images. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Improves audio configurations on em28xx: - mutes audio before changing amux; - adds a delay after setting audio src; - waits up to 50ms for ac97 busy. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Adds vidioc_[g|s]_register handlers. This allows getting/setting register from em28xx. Signed-off-by: -
Mauro Carvalho Chehab authored
AC97 register initialization seem to always be needed. This patch fixes audio for Prolink/Pixelview USB2 board. Signed-off-by: -
Andrew Morton authored
drivers/media/video/em28xx/em28xx-core.c: In function 'em28xx_set_audio_source': drivers/media/video/em28xx/em28xx-core.c:276: warning: 'no_ac97' may be used uninitialized in this function This looks like a genuine bug to me. Signed-off-by:
-
Brandon Philips authored
Signed-off-by:
Brandon Philips <bphilips@suse.de> Signed-off-by:
-
Roel Kluin authored
'!' has a higher priority than '&': bitanding has no effect. Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Signed-off-by:
-
Luc Saillard authored
Device description: WinTV-HVR-900 M/R: 65018/B3C0 ##4207 Signed-off-by:
Luc Saillard <luc@saillard.org> Signed-off-by:
-
