- 27 Sep, 2011 36 commits
-
-
Eliad Peller authored
tx params are currently configured per hw, although they should be configured per interface. Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Whenever the scan request or tx_mgmt is requesting not to use CCK rate for managemet frames through NL80211_ATTR_TX_NO_CCK_RATE attribute, then mac80211 should select appropriate least non-CCK rate. This could help to send P2P probes and P2P action frames at non 11b rates without diabling 11b rates globally. Cc: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
Rajkumar Manoharan authored
Add a new nl80211 attribute to specify whether to send the management frames in CCK rate or not. As of now the wpa_supplicant is disabling CCK rate at P2P init itself. So this patch helps to send P2P probe request/probe response/action frames being sent at non CCK rate in 2GHz without disabling 11b rates. This attribute is used with NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_FRAME commands to disable CCK rate for management frame transmission. Cc: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
-
Dan Carpenter authored
We returned a freed variable on some error paths when the intent was to return a NULL. Part of the reason this was missed was that the code was confusing because it had too many gotos so I removed them and simplified the flow a bit. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by:
-
Johannes Berg authored
When we cancel a scan, the completion runs only from the workqueue. This can cause the remain-on-channel scan to fail when another one was just canceled, because we're still aborting it. To fix this, run the completion inline with the lock still held before returning from iwl_scan_cancel_timeout(). Also, to avoid the scan complete work from completing a new scan prematurely, add a new STATUS_SCAN_COMPLETE bit. Reported-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Tested-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Johannes Berg authored
To make the next patch easier to read, move the function up, it'll be needed earlier in this file in the next patch. Signed-off-by:
-
Johannes Berg authored
We'll need to be able to run scan complete inline, not from the workqueue, so refactor it. Signed-off-by:
-
Johannes Berg authored
The return value of iwl_scan_cancel_timeout() isn't used anywhere, so let's just remove it. Signed-off-by:
-
Johannes Berg authored
Only 5150 series devices report their temperature in Kelvin, and for those we already convert it to Celsius when storing into priv->temperature, so there's no way priv->temperature will ever be in Kelvin. Remove support for this. Signed-off-by:
-
Johannes Berg authored
When an AP mode interface is added with a DTIM period of two, the slot programming is wrong. Fix it by taking into account the DTIM period. Signed-off-by:
-
Johannes Berg authored
If iwl_scan_initiate() fails for any reason, priv->scan_request and priv->scan_vif are left dangling. This can lead to a crash later when iwl_bg_scan_completed() tries to run a pending scan request. In practice, this seems to be very rare due to the STATUS_SCANNING check earlier. That check, however, is wrong -- it should allow a scan to be queued when a reset/roc scan is going on. When a normal scan is already going on, a new one can't be issued by mac80211, so that code can be removed completely. I introduced this bug when adding off-channel support in commit 266af4c7. Cc: stable@kernel.org [3.0] Reported-by:
Peng Yan <peng.yan@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
As everybody knows kcalloc checks the multiplication is safe and that we don't run into overflow. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
In the current code, the rate scaling isn't fed with statistics from the BA notifications. This is since my patch: iwlagn: reclaim the packets in transport layer Fix that. Signed-off-by:
-
Wey-Yi Guy authored
Add debugging to show the status of probe in scan notification to help debug probe related issues Signed-off-by:
-
Emmanuel Grumbach authored
Since all the queue logic has been moved to the transport layer, the sequence number is set in the transport layer. While doing that I forgot that the mac header is copied to the TB of the TX cmd in the upper layer before the call to the transport layer. So basically we used the sequence number from mac80211... This was fine for the first assocation but after the second, mac80211 resets its counters while we don't hence a shift that led to terrible impact on performance. Signed-off-by:
-
Wey-Yi Guy authored
Change to iwlwifi.git instead of iwlwifi-2.6.git iwlwifi-2.6.git still works for backward compatibility Signed-off-by:
-
Emmanuel Grumbach authored
Since priv->temperature is signed, we cannot use debugfs_create_u32 to refer to it. Use a regular debugfs file instead. Signed-off-by:
-
Emmanuel Grumbach authored
Txid was used without being initialized. Signed-off-by:
-
Felix Fietkau authored
After 'ath9k: optimize ath9k_ps_restore', it would only send the device to network sleep and not to full sleep anymore, potentially causing more battery drain. Reported-by:
Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Ilan Elias authored
Protect 'cb' and 'cb_context' arguments in nci_data_exchange. In fact, this implements a queue with max length of 1 data exchange transactions in parallel. Signed-off-by:
Ilan Elias <ilane@ti.com> Acked-by:
-
Ilan Elias authored
When start_poll is called, and a target was implicitly activated, we need to implicitly deactivate it. On the other hand, when the target was activated by the user, we should not deactivate it. Signed-off-by:
-
Ilan Elias authored
Signed-off-by:
-
Amitkumar Karwar authored
After handling command response, cmd skb is inserted into command free queue(which keeps track of availabile skbs) for reuse purpose. Skb length is not getting reset to zero here. This patch takes care of it. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
ieee80211_channel_to_frequency() routine expects band parameter in the form of "enum ieee80211_band band". Currently driver specific band (BAND_A, BAND_AN etc.) is passed to the routine. This patch makes sure that correct parameter is passed. Signed-off-by:
-
Amitkumar Karwar authored
In recent commit "mwifiex: use cfg80211 dynamic scan..." (7c6fa2a8..) scan table handling in driver is removed to make use of cfg80211 dynamic scan table. Now driver sends beacon buffers found in scanning directly to stack and parse the buffer for requested BSS only during association. Beacon buffer doesn't contain bss band information. Driver gets it from firmware in separate tlv (chan_band_tlv). Currently since we don't inform stack about bss bandinfo, there is an issue with 5GHz association. Use "priv" field of struct cfg80211_bss to store bandinfo. This fixes 5GHz association issue. Signed-off-by:
-
Amitkumar Karwar authored
Sometimes association in 5GHz doesn't work. Dmesg log shows "Can not find requested SSID xyz" error message. Currently while preparing scan channel list for firmware Null entries are created for disabled channels. The routine which retrieves this list ignores channels after Null entry. Hence sometimes driver doesn't scan the channel of requested AP and association fails. The issue is fixed by avoiding those NULL entries. Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Daniel Drake authored
When scanning for the broadcast SSID, there is no need to add the SSID TLV (restoring the behaviour of the driver behaviour in the wext days, confirmed in Marvell specifications). If bssid is unspecified, the current scan code will usually fire off an active scan probing for the specific requested SSID. However, if a scan is ongoing (or has just finished), those scan results will be used instead (even if that scan is totally different, e.g. a passive scan on channel 4 for a different SSID). Fix this inconsistency by always firing off a scan when associating without a bssid. Signed-off-by:
Daniel Drake <dsd@laptop.org> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Jouni Malinen authored
Instead of using a hardcoded list of cipher suites in nl80211.c, use a shared function in util.c to verify that the driver advertises support for the specified cipher. This provides more accurate validation of the values and allows vendor-specific cipher suites to be added in drivers. Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
-
Jouni Malinen authored
NL80211_ATTR_AKM_SUITES can be used to configure new AKMs, like FT or the SHA-256 -based AKMs or FT from 802.11r/802.11w. In addition, vendor specific AKMs could be used. The current validation code for the connect command prevents cfg80211-based drivers from using these mechanisms even if the driver would not actually use this AKM value (i.e., it uses WPA/RSN IE from user space). mac80211-based drivers allow any AKM to be used since this value is not used there. Remove the unnecessary validation step in cfg80211 to allow drivers to decide what AKMs are supported. In theory, we could handle this by advertising supported AKMs, but that would not be very effective unless we enforce all drivers (including mac80211) to advertise the set of supported AKMs. This would require additional changes in many places whenever a new AKM is introduced even though no actually functionality changes may be required in most drivers. Signed-off-by:
-
Eliad Peller authored
TSF can be kept per vif. Add ieee80211_vif param to set/get/reset_tsf, and move the debugfs entries to the per-vif directory. Update all the drivers that implement these callbacks. Signed-off-by:
-
Mohammed Shafi Shajakhan authored
this represents the bitmap of block ACK received after the successful transmission of an aggregate frame. also made few changes to beautify the display Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
-
-
-
- 23 Sep, 2011 4 commits
-
-
Arik Nemtsov authored
Use the AP_MAX_LINKS as the upper boundary for traversing the links array, thereby guaranteeing BA sessions with all connected STAs are stopped when the stop_ba event is received. Signed-off-by:
Arik Nemtsov <arik@wizery.com> Signed-off-by:
Luciano Coelho <coelho@ti.com>
-
Arik Nemtsov authored
Fix an erroneous labeling of array boundaries in the fw_status structure. Reported-by:
-
Eliad Peller authored
Save the configured bitrate, and use the min allowed rate as the basic rate (e.g. when scanning). Signed-off-by:
-
Arik Nemtsov authored
If a hidden SSID is requested, generate a probe response template containing the real SSID. Depends on the patch "mac80211: add ssid config to bss information in AP-mode". Signed-off-by:
-
