- 01 Feb, 2020 2 commits
-
-
Johan Hovold authored
commit 3139b180 upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: dad0d04f ("rsi: Add RS9113 wireless driver") Cc: stable <stable@vger.kernel.org> # 3.15 Cc: Fariya Fatima <fariyaf@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit b73e05aa upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 9afac70a ("orinoco: add orinoco_usb driver") Cc: stable <stable@vger.kernel.org> # 2.6.35 Signed-off-by:
-
- 29 Jan, 2020 38 commits
-
-
Greg Kroah-Hartman authored
-
David Hildenbrand authored
commit feee6b29 upstream. -- snip -- - Missing arm64 hot(un)plug support - Missing some vmem_altmap_offset() cleanups - Missing sub-section hotadd support - Missing unification of mm/hmm.c and kernel/memremap.c -- snip -- We currently try to shrink a single zone when removing memory. We use the zone of the first page of the memory we are removing. If that memmap was never initialized (e.g., memory was never onlined), we will read garbage and can trigger kernel BUGs (due to a stale pointer): BUG: unable to handle page fault for address: 000000000000353d #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ #317 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4 Workqueue: kacpi_hotplug acpi_hotplug_work_fn RIP: 0010:clear_zone_contiguous+0x5/0x10 Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840 RSP: 0018:ffffad2400043c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000 RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40 RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000 R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680 FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __remove_pages+0x4b/0x640 arch_remove_memory+0x63/0x8d try_remove_memory+0xdb/0x130 __remove_memory+0xa/0x11 acpi_memory_device_remove+0x70/0x100 acpi_bus_trim+0x55/0x90 acpi_device_hotplug+0x227/0x3a0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x221/0x550 worker_thread+0x50/0x3b0 kthread+0x105/0x140 ret_from_fork+0x3a/0x50 Modules linked in: CR2: 000000000000353d Instead, shrink the zones when offlining memory or when onlining failed. Introduce and use remove_pfn_range_from_zone(() for that. We now properly shrink the zones, even if we have DIMMs whereby - Some memory blocks fall into no zone (never onlined) - Some memory blocks fall into multiple zones (offlined+re-onlined) - Multiple memory blocks that fall into different zones Drop the zone parameter (with a potential dubious value) from __remove_pages() and __remove_section(). Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com Fixes: f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e8] Signed-off-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: <stable@vger.kernel.org> [5.0+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
David Hildenbrand authored
commit 2c91f8fc upstream. -- snip -- Only contextual issues: - Unrelated check_and_unmap_cpu_on_node() changes are missing. - Unrelated walk_memory_blocks() has not been moved/refactored yet. -- snip -- try_offline_node() is pretty much broken right now: - The node span is updated when onlining memory, not when adding it. We ignore memory that was mever onlined. Bad. - We touch possible garbage memmaps. The pfn_to_nid(pfn) can easily trigger a kernel panic. Bad for memory that is offline but also bad for subsection hotadd with ZONE_DEVICE, whereby the memmap of the first PFN of a section might contain garbage. - Sections belonging to mixed nodes are not properly considered. As memory blocks might belong to multiple nodes, we would have to walk all pageblocks (or at least subsections) within present sections. However, we don't have a way to identify whether a memmap that is not online was initialized (relevant for ZONE_DEVICE). This makes things more complicated. Luckily, we can piggy pack on the node span and the nid stored in memory blocks. Currently, the node span is grown when calling move_pfn_range_to_zone() - e.g., when onlining memory, and shrunk when removing memory, before calling try_offline_node(). Sysfs links are created via link_mem_sections(), e.g., during boot or when adding memory. If the node still spans memory or if any memory block belongs to the nid, we don't set the node offline. As memory blocks that span multiple nodes cannot get offlined, the nid stored in memory blocks is reliable enough (for such online memory blocks, the node still spans the memory). Introduce for_each_memory_block() to efficiently walk all memory blocks. Note: We will soon stop shrinking the ZONE_DEVICE zone and the node span when removing ZONE_DEVICE memory to fix similar issues (access of garbage memmaps) - until we have a reliable way to identify whether these memmaps were properly initialized. This implies later, that once a node had ZONE_DEVICE memory, we won't be able to set a node offline - which should be acceptable. Since commit f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online") memory that is added is not assoziated with a zone/node (memmap not initialized). The introducing commit 60a5a19e ("memory-hotplug: remove sysfs file of node") already missed that we could have multiple nodes for a section and that the zone/node span is updated when onlining pages, not when adding them. I tested this by hotplugging two DIMMs to a memory-less and cpu-less NUMA node. The node is properly onlined when adding the DIMMs. When removing the DIMMs, the node is properly offlined. Masayoshi Mizuma reported: : Without this patch, memory hotplug fails as panic: : : BUG: kernel NULL pointer dereference, address: 0000000000000000 : ... : Call Trace: : remove_memory_block_devices+0x81/0xc0 : try_remove_memory+0xb4/0x130 : __remove_memory+0xa/0x20 : acpi_memory_device_remove+0x84/0x100 : acpi_bus_trim+0x57/0x90 : acpi_bus_trim+0x2e/0x90 : acpi_device_hotplug+0x2b2/0x4d0 : acpi_hotplug_work_fn+0x1a/0x30 : process_one_work+0x171/0x380 : worker_thread+0x49/0x3f0 : kthread+0xf8/0x130 : ret_from_fork+0x35/0x40 [david@redhat.com: v3] Link: http://lkml.kernel.org/r/20191102120221.7553-1-david@redhat.com Link: http://lkml.kernel.org/r/20191028105458.28320-1-david@redhat.com Fixes: 60a5a19e ("memory-hotplug: remove sysfs file of node") Fixes: f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visiable after d0dc12e8Signed-off-by:
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Keith Busch <keith.busch@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Nayna Jain <nayna@linux.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 77e080e7 upstream. -- snip -- - Missing mm/hmm.c and kernel/memremap.c unification. -- hmm code does not need fixes (no altmap) - Missing 7cc7867f ("mm/devm_memremap_pages: enable sub-section remap") -- snip -- Patch series "mm/memory_hotplug: Shrink zones before removing memory", v6. This series fixes the access of uninitialized memmaps when shrinking zones/nodes and when removing memory. Also, it contains all fixes for crashes that can be triggered when removing certain namespace using memunmap_pages() - ZONE_DEVICE, reported by Aneesh. We stop trying to shrink ZONE_DEVICE, as it's buggy, fixing it would be more involved (we don't have SECTION_IS_ONLINE as an indicator), and shrinking is only of limited use (set_zone_contiguous() cannot detect the ZONE_DEVICE as contiguous). We continue shrinking !ZONE_DEVICE zones, however, I reduced the amount of code to a minimum. Shrinking is especially necessary to keep zone->contiguous set where possible, especially, on memory unplug of DIMMs at zone boundaries. -------------------------------------------------------------------------- Zones are now properly shrunk when offlining memory blocks or when onlining failed. This allows to properly shrink zones on memory unplug even if the separate memory blocks of a DIMM were onlined to different zones or re-onlined to a different zone after offlining. Example: :/# cat /proc/zoneinfo Node 1, zone Movable spanned 0 present 0 managed 0 :/# echo "online_movable" > /sys/devices/system/memory/memory41/state :/# echo "online_movable" > /sys/devices/system/memory/memory43/state :/# cat /proc/zoneinfo Node 1, zone Movable spanned 98304 present 65536 managed 65536 :/# echo 0 > /sys/devices/system/memory/memory43/online :/# cat /proc/zoneinfo Node 1, zone Movable spanned 32768 present 32768 managed 32768 :/# echo 0 > /sys/devices/system/memory/memory41/online :/# cat /proc/zoneinfo Node 1, zone Movable spanned 0 present 0 managed 0 This patch (of 10): With an altmap, the memmap falling into the reserved altmap space are not initialized and, therefore, contain a garbage NID and a garbage zone. Make sure to read the NID/zone from a memmap that was initialized. This fixes a kernel crash that is observed when destroying a namespace: kernel BUG at include/linux/mm.h:1107! cpu 0x1: Vector: 700 (Program Check) at [c000000274087890] pc: c0000000004b9728: memunmap_pages+0x238/0x340 lr: c0000000004b9724: memunmap_pages+0x234/0x340 ... pid = 3669, comm = ndctl kernel BUG at include/linux/mm.h:1107! devm_action_release+0x30/0x50 release_nodes+0x268/0x2d0 device_release_driver_internal+0x174/0x240 unbind_store+0x13c/0x190 drv_attr_store+0x44/0x60 sysfs_kf_write+0x70/0xa0 kernfs_fop_write+0x1ac/0x290 __vfs_write+0x3c/0x70 vfs_write+0xe4/0x200 ksys_write+0x7c/0x140 system_call+0x5c/0x68 The "page_zone(pfn_to_page(pfn)" was introduced by 69324b8f ("mm, devm_memremap_pages: add MEMORY_DEVICE_PRIVATE support"), however, I think we will never have driver reserved memory with MEMORY_DEVICE_PRIVATE (no altmap AFAIKS). [david@redhat.com: minimze code changes, rephrase description] Link: http://lkml.kernel.org/r/20191006085646.5768-2-david@redhat.com Fixes: 2c2a5af6 ("mm, memory_hotplug: add nid parameter to arch_remove_memory") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
David Hildenbrand authored
commit d84f2f5a upstream. We don't allow to offline memory block devices that belong to multiple numa nodes. Therefore, such devices can never get removed. It is sufficient to process a single node when removing the memory block. No need to iterate over each and every PFN. We already have the nid stored for each memory block. Make sure that the nid always has a sane value. Please note that checking for node_online(nid) is not required. If we would have a memory block belonging to a node that is no longer offline, then we would have a BUG in the node offlining code. Link: http://lkml.kernel.org/r/20190719135244.15242-1-david@redhat.comSigned-off-by:
-
Dan Williams authored
commit 96da4350 upstream. -- snip -- Minor conflict, keep the altmap check. -- snip -- The zone type check was a leftover from the cleanup that plumbed altmap through the memory hotplug path, i.e. commit da024512 "mm: pass the vmem_altmap to arch_remove_memory and __remove_pages". Link: http://lkml.kernel.org/r/156092352642.979959.6664333788149363039.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
-
David Hildenbrand authored
commit b9bf8d34 upstream. The parameter is unused, so let's drop it. Memory removal paths should never care about zones. This is the job of memory offlining and will require more refactorings. Link: http://lkml.kernel.org/r/20190527111152.16324-12-david@redhat.comSigned-off-by:
Wei Yang <richardw.yang@linux.intel.com> Reviewed-by:
Michal Hocko <mhocko@suse.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arun KS <arunks@codeaurora.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Brown <broonie@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by:
-
David Hildenbrand authored
commit a31b264c upstream. We really don't want anything during memory hotunplug to fail. We always pass a valid memory block device, that check can go. Avoid allocating memory and eventually failing. As we are always called under lock, we can use a static piece of memory. This avoids having to put the structure onto the stack, having to guess about the stack size of callers. Patch inspired by a patch from Oscar Salvador. In the future, there might be no need to iterate over nodes at all. mem->nid should tell us exactly what to remove. Memory block devices with mixed nodes (added during boot) should properly fenced off and never removed. Link: http://lkml.kernel.org/r/20190527111152.16324-11-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
commit 4c4b7f9b upstream. Let's factor out removing of memory block devices, which is only necessary for memory added via add_memory() and friends that created memory block devices. Remove the devices before calling arch_remove_memory(). This finishes factoring out memory block device handling from arch_add_memory() and arch_remove_memory(). Link: http://lkml.kernel.org/r/20190527111152.16324-10-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
commit db051a0d upstream. Only memory to be added to the buddy and to be onlined/offlined by user space using /sys/devices/system/memory/... needs (and should have!) memory block devices. Factor out creation of memory block devices. Create all devices after arch_add_memory() succeeded. We can later drop the want_memblock parameter, because it is now effectively stale. Only after memory block devices have been added, memory can be onlined by user space. This implies, that memory is not visible to user space at all before arch_add_memory() succeeded. While at it - use WARN_ON_ONCE instead of BUG_ON in moved unregister_memory() - introduce find_memory_block_by_id() to search via block id - Use find_memory_block_by_id() in init_memory_block() to catch duplicates Link: http://lkml.kernel.org/r/20190527111152.16324-8-david@redhat.comSigned-off-by:
Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by:
-
David Hildenbrand authored
commit 18115825 upstream. We'll rework hotplug_memory_register() shortly, so it no longer consumes pass a section. [cai@lca.pw: fix a compilation warning] Link: http://lkml.kernel.org/r/1559320186-28337-1-git-send-email-cai@lca.pw Link: http://lkml.kernel.org/r/20190527111152.16324-6-david@redhat.comSigned-off-by:
Qian Cai <cai@lca.pw> Acked-by:
-
David Hildenbrand authored
commit 80ec922d upstream. -- snip -- Missing arm64 memory hot(un)plug support. -- snip -- We want to improve error handling while adding memory by allowing to use arch_remove_memory() and __remove_pages() even if CONFIG_MEMORY_HOTREMOVE is not set to e.g., implement something like: arch_add_memory() rc = do_something(); if (rc) { arch_remove_memory(); } We won't get rid of CONFIG_MEMORY_HOTREMOVE for now, as it will require quite some dependencies for memory offlining. Link: http://lkml.kernel.org/r/20190527111152.16324-7-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
commit 18c86506 upstream. Will come in handy when wanting to handle errors after arch_add_memory(). Link: http://lkml.kernel.org/r/20190527111152.16324-4-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
commit ac5c9426 upstream. -- snip -- Minor conflict in arch/powerpc/mm/mem.c -- snip -- All callers of arch_remove_memory() ignore errors. And we should really try to remove any errors from the memory removal path. No more errors are reported from __remove_pages(). BUG() in s390x code in case arch_remove_memory() is triggered. We may implement that properly later. WARN in case powerpc code failed to remove the section mapping, which is better than ignoring the error completely right now. Link: http://lkml.kernel.org/r/20190409100148.24703-5-david@redhat.comSigned-off-by:
-
Aneesh Kumar K.V authored
commit 26ad2671 upstream. This patch fix the below section mismatch warnings. WARNING: vmlinux.o(.text+0x2d1f44): Section mismatch in reference from the function devm_memremap_pages_release() to the function .meminit.text:arch_remove_memory() WARNING: vmlinux.o(.text+0x2d265c): Section mismatch in reference from the function devm_memremap_pages() to the function .meminit.text:arch_add_memory() Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
David Hildenbrand authored
commit 9d1d887d upstream. Let's just warn in case a section is not valid instead of failing to remove somewhere in the middle of the process, returning an error that will be mostly ignored by callers. Link: http://lkml.kernel.org/r/20190409100148.24703-4-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
commit cb7b3a36 upstream. Failing while removing memory is mostly ignored and cannot really be handled. Let's treat errors in unregister_memory_section() in a nice way, warning, but continuing. Link: http://lkml.kernel.org/r/20190409100148.24703-3-david@redhat.comSigned-off-by:
-
Dan Carpenter authored
commit 16df1456 upstream. The remove_memory_block() function was renamed to in commit cc292b0b ("drivers/base/memory.c: rename remove_memory_block() to remove_memory_section()"). Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Baoquan He authored
commit 063b8a4c upstream. The input parameter 'phys_index' of memory_block_action() is actually the section number, but not the phys_index of memory_block. This is a relic from the past when one memory block could only contain one section. Rename it to start_section_nr. And also in remove_memory_section(), the 'node_id' and 'phys_device' arguments are not used by anyone. Remove them. Link: http://lkml.kernel.org/r/20190329144250.14315-2-bhe@redhat.comSigned-off-by:
Baoquan He <bhe@redhat.com> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Reviewed-by:
-
David Hildenbrand authored
commit d9eb1417 upstream. Patch series "mm/memory_hotplug: Better error handling when removing memory", v1. Error handling when removing memory is somewhat messed up right now. Some errors result in warnings, others are completely ignored. Memory unplug code can essentially not deal with errors properly as of now. remove_memory() will never fail. We have basically two choices: 1. Allow arch_remov_memory() and friends to fail, propagating errors via remove_memory(). Might be problematic (e.g. DIMMs consisting of multiple pieces added/removed separately). 2. Don't allow the functions to fail, handling errors in a nicer way. It seems like most errors that can theoretically happen are really corner cases and mostly theoretical (e.g. "section not valid"). However e.g. aborting removal of sections while all callers simply continue in case of errors is not nice. If we can gurantee that removal of memory always works (and WARN/skip in case of theoretical errors so we can figure out what is going on), we can go ahead and implement better error handling when adding memory. E.g. via add_memory(): arch_add_memory() ret = do_stuff() if (ret) { arch_remove_memory(); goto error; } Handling here that arch_remove_memory() might fail is basically impossible. So I suggest, let's avoid reporting errors while removing memory, warning on theoretical errors instead and continuing instead of aborting. This patch (of 4): __add_pages() doesn't add the memory resource, so __remove_pages() shouldn't remove it. Let's factor it out. Especially as it is a special case for memory used as system memory, added via add_memory() and friends. We now remove the resource after removing the sections instead of doing it the other way around. I don't think this change is problematic. add_memory() register memory resource arch_add_memory() remove_memory arch_remove_memory() release memory resource While at it, explain why we ignore errors and that it only happeny if we remove memory in a different granularity as we added it. [david@redhat.com: fix printk warning] Link: http://lkml.kernel.org/r/20190417120204.6997-1-david@redhat.com Link: http://lkml.kernel.org/r/20190409100148.24703-2-david@redhat.comSigned-off-by:
-
Oscar Salvador authored
commit 2c2a5af6 upstream. -- snip -- Missing unification of mm/hmm.c and kernel/memremap.c -- snip -- Patch series "Do not touch pages in hot-remove path", v2. This patchset aims for two things: 1) A better definition about offline and hot-remove stage 2) Solving bugs where we can access non-initialized pages during hot-remove operations [2] [3]. This is achieved by moving all page/zone handling to the offline stage, so we do not need to access pages when hot-removing memory. [1] https://patchwork.kernel.org/cover/10691415/ [2] https://patchwork.kernel.org/patch/10547445/ [3] https://www.spinics.net/lists/linux-mm/msg161316.html This patch (of 5): This is a preparation for the following-up patches. The idea of passing the nid is that it will allow us to get rid of the zone parameter afterwards. Link: http://lkml.kernel.org/r/20181127162005.15833-2-osalvador@suse.deSigned-off-by:
-
Wei Yang authored
commit 3b6fd6ff upstream. In cb5e39b8 ("drivers: base: refactor add_memory_section() to add_memory_block()"), add_memory_block() is introduced, which is only invoked in memory_dev_init(). When combining these two loops in memory_dev_init() and add_memory_block(), they looks like this: for (i = 0; i < NR_MEM_SECTIONS; i += sections_per_block) for (j = i; (j < i + sections_per_block) && j < NR_MEM_SECTIONS; j++) Since it is sure the (i < NR_MEM_SECTIONS) and j sits in its own memory block, the check of (j < NR_MEM_SECTIONS) is not necessary. This patch just removes this check. Link: http://lkml.kernel.org/r/20181123222811.18216-1-richard.weiyang@gmail.comSigned-off-by:
Wei Yang <richard.weiyang@gmail.com> Reviewed-by:
-
Wei Yang authored
commit 4e0d2e7e upstream. Since the information needed in sparse_add_one_section() is node id to allocate proper memory, it is not necessary to pass its pgdat. This patch changes the prototype of sparse_add_one_section() to pass node id directly. This is intended to reduce misleading that sparse_add_one_section() would touch pgdat. Link: http://lkml.kernel.org/r/20181204085657.20472-2-richard.weiyang@gmail.comSigned-off-by:
-
Wei Yang authored
commit 83af6588 upstream. pgdat_resize_lock is used to protect pgdat's memory region information like: node_start_pfn, node_present_pages, etc. While in function sparse_add/remove_one_section(), pgdat_resize_lock is used to protect initialization/release of one mem_section. This looks not proper. These code paths are currently protected by mem_hotplug_lock currently but should there ever be any reason for locking at the sparse layer a dedicated lock should be introduced. Following is the current call trace of sparse_add/remove_one_section() mem_hotplug_begin() arch_add_memory() add_pages() __add_pages() __add_section() sparse_add_one_section() mem_hotplug_done() mem_hotplug_begin() arch_remove_memory() __remove_pages() __remove_section() sparse_remove_one_section() mem_hotplug_done() The comment above the pgdat_resize_lock also mentions "Holding this will also guarantee that any pfn_valid() stays that way.", which is true with the current implementation and false after this patch. But current implementation doesn't meet this comment. There isn't any pfn walkers to take the lock so this looks like a relict from the past. This patch also removes this comment. [richard.weiyang@gmail.com: v4] Link: http://lkml.kernel.org/r/20181204085657.20472-1-richard.weiyang@gmail.com [mhocko@suse.com: changelog suggestion] Link: http://lkml.kernel.org/r/20181128091243.19249-1-richard.weiyang@gmail.comSigned-off-by:
-
David Hildenbrand authored
commit d15e5926 upstream. Patch series "mm: online/offline_pages called w.o. mem_hotplug_lock", v3. Reading through the code and studying how mem_hotplug_lock is to be used, I noticed that there are two places where we can end up calling device_online()/device_offline() - online_pages()/offline_pages() without the mem_hotplug_lock. And there are other places where we call device_online()/device_offline() without the device_hotplug_lock. While e.g. echo "online" > /sys/devices/system/memory/memory9/state is fine, e.g. echo 1 > /sys/devices/system/memory/memory9/online Will not take the mem_hotplug_lock. However the device_lock() and device_hotplug_lock. E.g. via memory_probe_store(), we can end up calling add_memory()->online_pages() without the device_hotplug_lock. So we can have concurrent callers in online_pages(). We e.g. touch in online_pages() basically unprotected zone->present_pages then. Looks like there is a longer history to that (see Patch #2 for details), and fixing it to work the way it was intended is not really possible. We would e.g. have to take the mem_hotplug_lock in device/base/core.c, which sounds wrong. Summary: We had a lock inversion on mem_hotplug_lock and device_lock(). More details can be found in patch 3 and patch 6. I propose the general rules (documentation added in patch 6): 1. add_memory/add_memory_resource() must only be called with device_hotplug_lock. 2. remove_memory() must only be called with device_hotplug_lock. This is already documented and holds for all callers. 3. device_online()/device_offline() must only be called with device_hotplug_lock. This is already documented and true for now in core code. Other callers (related to memory hotplug) have to be fixed up. 4. mem_hotplug_lock is taken inside of add_memory/remove_memory/ online_pages/offline_pages. To me, this looks way cleaner than what we have right now (and easier to verify). And looking at the documentation of remove_memory, using lock_device_hotplug also for add_memory() feels natural. This patch (of 6): remove_memory() is exported right now but requires the device_hotplug_lock, which is not exported. So let's provide a variant that takes the lock and only export that one. The lock is already held in arch/powerpc/platforms/pseries/hotplug-memory.c drivers/acpi/acpi_memhotplug.c arch/powerpc/platforms/powernv/memtrace.c Apart from that, there are not other users in the tree. Link: http://lkml.kernel.org/r/20180925091457.28651-2-david@redhat.comSigned-off-by:
Pavel Tatashin <pavel.tatashin@microsoft.com> Reviewed-by:
Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by:
-
Martin Schiller authored
commit e21dba7a upstream. This patch fixes 2 issues in x25_connect(): 1. It makes absolutely no sense to reset the neighbour and the connection state after a (successful) nonblocking call of x25_connect. This prevents any connection from being established, since the response (call accept) cannot be processed. 2. Any further calls to x25_connect() while a call is pending should simply return, instead of creating new Call Request (on different logical channels). This patch should also fix the "KASAN: null-ptr-deref Write in x25_connect" and "BUG: unable to handle kernel NULL pointer dereference in x25_connect" bugs reported by syzbot. Signed-off-by:
Martin Schiller <ms@dev.tdt.de> Reported-by: syzbot+429c200ffc8772bfe070@syzkaller.appspotmail.com Reported-by: syzbot+eec0c87f31a7c3b66f7b@syzkaller.appspotmail.com Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 82603549 upstream. This new helper function validates that unknown family and chain type coming from userspace do not trigger an out-of-bound array access. Bail out in case __nft_chain_type_get() returns NULL from nft_chain_parse_hook(). Fixes: 9370761c ("netfilter: nf_tables: convert built-in tables/chains to chain types") Reported-by: syzbot+156a04714799b1d480bc@syzkaller.appspotmail.com Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Kadlecsik József authored
commit 32c72165 upstream. The bitmap allocation did not use full unsigned long sizes when calculating the required size and that was triggered by KASAN as slab-out-of-bounds read in several places. The patch fixes all of them. Reported-by: syzbot+fabca5cbf5e54f3fe2de@syzkaller.appspotmail.com Reported-by: syzbot+827ced406c9a1d9570ed@syzkaller.appspotmail.com Reported-by: syzbot+190d63957b22ef673ea5@syzkaller.appspotmail.com Reported-by: syzbot+dfccdb2bdb4a12ad425e@syzkaller.appspotmail.com Reported-by: syzbot+df0d0f5895ef1f41a65b@syzkaller.appspotmail.com Reported-by: syzbot+b08bd19bb37513357fd4@syzkaller.appspotmail.com Reported-by: syzbot+53cdd0ec0bbabd53370a@syzkaller.appspotmail.com Signed-off-by:
Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by:
-
Bo Wu authored
commit bba340c7 upstream. In iscsi_if_rx func, after receiving one request through iscsi_if_recv_msg func, iscsi_if_send_reply will be called to try to reply to the request in a do-while loop. If the iscsi_if_send_reply function keeps returning -EAGAIN, a deadlock will occur. For example, a client only send msg without calling recvmsg func, then it will result in the watchdog soft lockup. The details are given as follows: sock_fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_ISCSI); retval = bind(sock_fd, (struct sock addr*) & src_addr, sizeof(src_addr); while (1) { state_msg = sendmsg(sock_fd, &msg, 0); //Note: recvmsg(sock_fd, &msg, 0) is not processed here. } close(sock_fd); watchdog: BUG: soft lockup - CPU#7 stuck for 22s! [netlink_test:253305] Sample time: 4000897528 ns(HZ: 250) Sample stat: curr: user: 675503481560, nice: 321724050, sys: 448689506750, idle: 4654054240530, iowait: 40885550700, irq: 14161174020, softirq: 8104324140, st: 0 deta: user: 0, nice: 0, sys: 3998210100, idle: 0, iowait: 0, irq: 1547170, softirq: 242870, st: 0 Sample softirq: TIMER: 992 SCHED: 8 Sample irqstat: irq 2: delta 1003, curr: 3103802, arch_timer CPU: 7 PID: 253305 Comm: netlink_test Kdump: loaded Tainted: G OE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO) pc : __alloc_skb+0x104/0x1b0 lr : __alloc_skb+0x9c/0x1b0 sp : ffff000033603a30 x29: ffff000033603a30 x28: 00000000000002dd x27: ffff800b34ced810 x26: ffff800ba7569f00 x25: 00000000ffffffff x24: 0000000000000000 x23: ffff800f7c43f600 x22: 0000000000480020 x21: ffff0000091d9000 x20: ffff800b34eff200 x19: ffff800ba7569f00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0001000101000100 x13: 0000000101010000 x12: 0101000001010100 x11: 0001010101010001 x10: 00000000000002dd x9 : ffff000033603d58 x8 : ffff800b34eff400 x7 : ffff800ba7569200 x6 : ffff800b34eff400 x5 : 0000000000000000 x4 : 00000000ffffffff x3 : 0000000000000000 x2 : 0000000000000001 x1 : ffff800b34eff2c0 x0 : 0000000000000300 Call trace: __alloc_skb+0x104/0x1b0 iscsi_if_rx+0x144/0x12bc [scsi_transport_iscsi] netlink_unicast+0x1e0/0x258 netlink_sendmsg+0x310/0x378 sock_sendmsg+0x4c/0x70 sock_write_iter+0x90/0xf0 __vfs_write+0x11c/0x190 vfs_write+0xac/0x1c0 ksys_write+0x6c/0xd8 __arm64_sys_write+0x24/0x30 el0_svc_common+0x78/0x130 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6915E3D4D2@dggeml505-mbx.china.huawei.comSigned-off-by:
Bo Wu <wubo40@huawei.com> Reviewed-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Reviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Hans Verkuil authored
commit ee8951e5 upstream. v4l2_vbi_format, v4l2_sliced_vbi_format and v4l2_sdr_format have a reserved array at the end that should be zeroed by drivers as per the V4L2 spec. Older drivers often do not do this, so just handle this in the core. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
Wen Huang authored
commit e5e884b4 upstream. add_ie_rates() copys rates without checking the length in bss descriptor from remote AP.when victim connects to remote attacker, this may trigger buffer overflow. lbs_ibss_join_existing() copys rates without checking the length in bss descriptor from remote IBSS node.when victim connects to remote attacker, this may trigger buffer overflow. Fix them by putting the length check before performing copy. This fix addresses CVE-2019-14896 and CVE-2019-14897. This also fix build warning of mixed declarations and code. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Wen Huang <huangwenabc@gmail.com> Signed-off-by:
-
Suzuki K Poulose authored
commit 024c1fd9 upstream. During a perf session we try to allocate buffers on the "node" associated with the CPU the event is bound to. If it is not bound to a CPU, we use the current CPU node, using smp_processor_id(). However this is unsafe in a pre-emptible context and could generate the splats as below : BUG: using smp_processor_id() in preemptible [00000000] code: perf/2544 caller is tmc_alloc_etf_buffer+0x5c/0x60 CPU: 2 PID: 2544 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019 Call trace: dump_backtrace+0x0/0x150 show_stack+0x14/0x20 dump_stack+0x9c/0xc4 debug_smp_processor_id+0x10c/0x110 tmc_alloc_etf_buffer+0x5c/0x60 etm_setup_aux+0x1c4/0x230 rb_alloc_aux+0x1b8/0x2b8 perf_mmap+0x35c/0x478 mmap_region+0x34c/0x4f0 do_mmap+0x2d8/0x418 vm_mmap_pgoff+0xd0/0xf8 ksys_mmap_pgoff+0x88/0xf8 __arm64_sys_mmap+0x28/0x38 el0_svc_handler+0xd8/0x138 el0_svc+0x8/0xc Use NUMA_NO_NODE hint instead of using the current node for events not bound to CPUs. Fixes: 2e499bbc ("coresight: tmc: implementing TMC-ETF AUX space API") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Cc: stable <stable@vger.kernel.org> # 4.7+ Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20190620221237.3536-4-mathieu.poirier@linaro.orgSigned-off-by:
-
Suzuki K Poulose authored
commit 730766ba upstream. During a perf session we try to allocate buffers on the "node" associated with the CPU the event is bound to. If it is not bound to a CPU, we use the current CPU node, using smp_processor_id(). However this is unsafe in a pre-emptible context and could generate the splats as below : BUG: using smp_processor_id() in preemptible [00000000] code: perf/2544 Use NUMA_NO_NODE hint instead of using the current node for events not bound to CPUs. Fixes: 2997aa40 ("coresight: etb10: implementing AUX API") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Ard Biesheuvel authored
commit 504582e8 upstream. Commit 79c65d17 ("crypto: cbc - Convert to skcipher") updated the generic CBC template wrapper from a blkcipher to a skcipher algo, to get away from the deprecated blkcipher interface. However, as a side effect, drivers that instantiate CBC transforms using the blkcipher as a fallback no longer work, since skciphers can wrap blkciphers but not the other way around. This broke the geode-aes driver. So let's fix it by moving to the sync skcipher interface when allocating the fallback. At the same time, align with the generic API for ECB and CBC by rejecting inputs that are not a multiple of the AES block size. Fixes: 79c65d17 ("crypto: cbc - Convert to skcipher") Cc: <stable@vger.kernel.org> # v4.20+ ONLY Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Florian Bezdeka <florian@bezdeka.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Masato Suzuki authored
ZBC/ZAC report zones command may return less bytes than requested if the number of matching zones for the report request is small. However, unlike read or write commands, the remainder of incomplete report zones commands cannot be automatically requested by the block layer: the start sector of the next report cannot be known, and the report reply may not be 512B aligned for SAS drives (a report zone reply size is always a multiple of 64B). The regular request completion code executing bio_advance() and restart of the command remainder part currently causes invalid zone descriptor data to be reported to the caller if the report zone size is smaller than 512B (a case that can happen easily for a report of the last zones of a SAS drive for example). Since blkdev_report_zones() handles report zone command processing in a loop until completion (no more zones are being reported), we can safely avoid that the block layer performs an incorrect bio_advance() call and restart of the remainder of incomplete report zone BIOs. To do so, always indicate a full completion of REQ_OP_ZONE_REPORT by setting good_bytes to the request buffer size and by setting the command resid to 0. This does not affect the post processing of the report zone reply done by sd_zbc_complete() since the reply header indicates the number of zones reported. Fixes: 89d94756 ("sd: Implement support for ZBC devices") Cc: <stable@vger.kernel.org> # 4.19 Cc: <stable@vger.kernel.org> # 4.14 Signed-off-by:
Masato Suzuki <masato.suzuki@wdc.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Acked-by:
-
Steven Rostedt (VMware) authored
commit 8bcebc77 upstream. While working on a tool to convert SQL syntex into the histogram language of the kernel, I discovered the following bug: # echo 'first u64 start_time u64 end_time pid_t pid u64 delta' >> synthetic_events # echo 'hist:keys=pid:start=common_timestamp' > events/sched/sched_waking/trigger # echo 'hist:keys=next_pid:delta=common_timestamp-$start,start2=$start:onmatch(sched.sched_waking).trace(first,$start2,common_timestamp,next_pid,$delta)' > events/sched/sched_switch/trigger Would not display any histograms in the sched_switch histogram side. But if I were to swap the location of "delta=common_timestamp-$start" with "start2=$start" Such that the last line had: # echo 'hist:keys=next_pid:start2=$start,delta=common_timestamp-$start:onmatch(sched.sched_waking).trace(first,$start2,common_timestamp,next_pid,$delta)' > events/sched/sched_switch/trigger The histogram works as expected. What I found out is that the expressions clear out the value once it is resolved. As the variables are resolved in the order listed, when processing: delta=common_timestamp-$start The $start is cleared. When it gets to "start2=$start", it errors out with "unresolved symbol" (which is silent as this happens at the location of the trace), and the histogram is dropped. When processing the histogram for variable references, instead of adding a new reference for a variable used twice, use the same reference. That way, not only is it more efficient, but the order will no longer matter in processing of the variables. From Tom Zanussi: "Just to clarify some more about what the problem was is that without your patch, we would have two separate references to the same variable, and during resolve_var_refs(), they'd both want to be resolved separately, so in this case, since the first reference to start wasn't part of an expression, it wouldn't get the read-once flag set, so would be read normally, and then the second reference would do the read-once read and also be read but using read-once. So everything worked and you didn't see a problem: from: start2=$start,delta=common_timestamp-$start In the second case, when you switched them around, the first reference would be resolved by doing the read-once, and following that the second reference would try to resolve and see that the variable had already been read, so failed as unset, which caused it to short-circuit out and not do the trigger action to generate the synthetic event: to: delta=common_timestamp-$start,start2=$start With your patch, we only have the single resolution which happens correctly the one time it's resolved, so this can't happen." Link: https://lore.kernel.org/r/20200116154216.58ca08eb@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 067fe038 ("tracing: Add variable reference handling to hist triggers") Reviewed-by:
Tom Zanuss <zanussi@kernel.org> Tested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Tom Zanussi authored
commit de40f033 upstream. Have create_var_ref() manage the hist trigger's var_ref list, rather than having similar code doing it in multiple places. This cleans up the code and makes sure var_refs are always accounted properly. Also, document the var_ref-related functions to make what their purpose clearer. Link: http://lkml.kernel.org/r/05ddae93ff514e66fc03897d6665231892939913.1545161087.git.tom.zanussi@linux.intel.comAcked-by:
Namhyung Kim <namhyung@kernel.org> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by:
-
Tom Zanussi authored
commit 656fe2ba upstream. Since every var ref for a trigger has an entry in the var_ref[] array, use that to destroy the var_refs, instead of piecemeal via the field expressions. This allows us to avoid having to keep and treat differently separate lists for the action-related references, which future patches will remove. Link: http://lkml.kernel.org/r/fad1a164f0e257c158e70d6eadbf6c586e04b2a2.1545161087.git.tom.zanussi@linux.intel.comAcked-by:
-
