- 15 Apr, 2016 6 commits
-
-
Chad Dupuis authored
Signed-off-by:
Chad Dupuis <chad.dupuis@qlogic.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Chad Dupuis authored
Signed-off-by:
-
Joe Carnuccio authored
Per customer request, add the following driver tunables: o devloss_tmo o max_luns o queue_depth o tm_timeout tm_timeout is set per scsi_host in /sys/class/scsi_host/hostX/tm_timeout. Signed-off-by:
Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by:
-
Hannes Reinecke authored
VPD pages 0x0 and 0x83 are mandatory even for SPC-2, so we should be lowering the restriction to avoid having to whitelist every SPC-2 compliant device. Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Johannes Thumshirn authored
Now that we've done a more comprehensive fix with the intermediate target state we can remove the previous hack introduced with commit 90a88d6e ("scsi: fix soft lockup in scsi_remove_target() on module removal"). Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
-
Johannes Thumshirn authored
Add intermediate STARGET_REMOVE state to scsi_target_state to avoid running into the BUG_ON() in scsi_target_reap(). The STARGET_REMOVE state is only valid in the path from scsi_remove_target() to scsi_target_destroy() indicating this target is going to be removed. This re-fixes the problem introduced in commits bc3f02a7 ("[SCSI] scsi_remove_target: fix softlockup regression on hot remove") and 40998193 ("scsi: restart list search after unlock in scsi_remove_target") in a more comprehensive way. [mkp: Included James' fix for scsi_target_destroy()] Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by:
James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by:
-
- 11 Apr, 2016 34 commits
-
-
Narsimhulu Musini authored
scsi host is added after negotiating the max number of IOs with Firmware. Signed-off-by:
Narsimhulu Musini <nmusini@cisco.com> Signed-off-by:
Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by:
-
Narsimhulu Musini authored
While HBA reset is in progress, if IO/TM completion is received for the same IO then IO/TM completion path releases the driver private resources associated with IO. This fix prevents releasing the resources in IO and TM completion path if HBA reset is in progress. Signed-off-by:
-
Narsimhulu Musini authored
- On posting an IO to the firmware, adapter generates an interrupt. Due to hardware issues, sometimes the adapter fails to generate the interrupt. This behavior skips updating transmit queue- counters, which in turn causes the queue full condition. The fix addresses the queue full condition. - The fix also reserves a slot in transmit queue for hba reset. when queue full is observed during IO, there will always be room to post hba reset command. Signed-off-by:
-
Narsimhulu Musini authored
Fix deletes the snic targets synchronously prior to deletion of host. Signed-off-by:
-
Narsimhulu Musini authored
Fix handles control path queue issues such as queue full and sudden removal of hardware. Signed-off-by:
-
Narsimhulu Musini authored
- LUN goes offline if there are at least two scsi command timeouts Completing the IO with scsi_done() fixes the issue. Signed-off-by:
-
Narsimhulu Musini authored
Adding additional stats, and fixed logging messages. - Added qdepth change stats - Added separate isr stats for each type of interrupt - Fixed race in updating active IOs - Suppressed Link event message for DAS backend. Signed-off-by:
-
James Smart authored
Signed-off-by:
Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by:
James Smart <james.smart@avagotech.com> Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Revise versions to reflect SmartSAN 2.0 support RDP updated to support additional descriptors: Credit descriptor Optical Element Data descriptors for Temperature, Voltage, Bias current, TX power and TX power. Optical Product Data descriptor. Signed-off-by: -
James Smart authored
When the switch is rebooted, the lpfc driver fails to log into the fabric, and Unexpected timeout message is seen. Fix: Do not issue RegVFI if the FLOGI was internally aborted. Signed-off-by:
-
James Smart authored
Pass cmd iu payloads inline to adapter job structure rather than as separate dma buffers. Signed-off-by:
-
James Smart authored
The default rpi completion handler does back to back puts to force the removal of the ndlp. This ends up calling lpfc_unreg_rpi after the reference count is at 0. Fix: Check the reference count of the ndlp before getting the ref to make sure we are not getting a reference on a removed object. Signed-off-by:
-
James Smart authored
Driver didn't program the REG_VFI mailbox correctly, giving the adapter bad addresses. Signed-off-by:
-
James Smart authored
After a link bounce, when a remote port issues a LOGO while a REGLOGIN is pending on that port, the driver does not clean up the ndlp structure. May result in stack traces in the console log. Fix: Clear the NLP_REG_LOGIN_SEND flag on the ndlp in the routine Signed-off-by:
-
Bart Van Assche authored
Avoid that building with W=1 causes gcc to report warnings about symbols that have not been declared. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Reviewed-by:
-
Bart Van Assche authored
The output of "git grep -nHw iscsi_is_flashnode_conn_dev" shows that this function is only called from inside source file drivers/scsi/scsi_transport_iscsi.c. Hence unexport this function. Signed-off-by:
-
Bart Van Assche authored
Avoid that building with W=1 causes gcc to report warnings about set-but-not-used variables. Signed-off-by:
-
Bart Van Assche authored
Avoid that building with W=1 causes gcc to report warnings about set-but-not-used variables. Signed-off-by:
-
Bart Van Assche authored
Running "git grep -nHw iscsi_eh_target_reset" shows that this function is only called from inside the drivers/scsi/libiscsi.c source file. Hence unexport this function. Signed-off-by:
-
Bart Van Assche authored
In the Linux kernel it is preferred to return a meaningful error code instead of -1. This patch does not change the behavior of the caller of qla82xx_pinit_from_rom(). Signed-off-by:
Quinn Tran <quinn.tran@qlogic.com> Signed-off-by:
-
Bart Van Assche authored
Running the command "git grep -nHw scsi_is_fc_vport" shows that this function is only called from inside scsi_transport_fc.c. Hence unexport this function. Signed-off-by:
Hannes Reinicke <hare@suse.de> Signed-off-by:
-
Satish Kharat authored
When issuing I/O we check if rport is online through libfc rport_lookup() function which needs to be protected by mutex lock that cannot acquired in I/O context. The change is to use midlayer remote port s dd_data which is preserved until its devloss timeout and no protection is required. The the scsi_cmnd error code is expected to be in the left 16 bits of the result field. Changed to correct this. Fnic driver version changed from 1.6.0.20 to 1.6.0.21 Signed-off-by:
Satish Kharat <satishkh@cisco.com> Signed-off-by:
-
Satish Kharat authored
In case of LUN reset, the device reset command is issued with one of the I/Os that has timed out on that LUN. The change is to also return this I/O with error status set to DID_RESET. In case when the reset is issued using the sg_reset tool (from sg3_utils) it is a new command and new_sc is set to 1. Fnic driver version changed from 1.6.0.19 to 1.6.0.20 [mkp: Fixed checkpatch warning] Signed-off-by:
-
Satish Kharat authored
If an I/O times out and an abort issued by host, if the abort is successful we need to set scsi status as DID_ABORT. Or else the mid-layer error handler which looks for this error code, will offline the device. Also if the original I/O is not found in fnic firmware, we will consider the abort as successful. The start_time assignment is moved because of the new goto. Fnic driver version changed from 1.6.0.17a to 1.6.0.19, version 1.6.0.18 has been skipped [mkp: Fixed checkpatch warning] Signed-off-by:
-
Hannes Reinecke authored
Add new trace functions for ZBC_IN and ZBC_OUT. Reviewed-by:
Doug Gilbert <dgilbert@interlog.com> Reviewed-by:
-
Hannes Reinecke authored
Reviewed-by:
-
Hannes Reinecke authored
scsi_opcode_name() is displaying the opcode, not the service action. Reviewed-by:
-
Hannes Reinecke authored
On larger installations it is useful to disable automatic LUN scanning, and only add the required LUNs via udev rules. This can speed up bootup dramatically. This patch introduces a new scan module parameter value 'manual', which works like 'none', but can be overridden by setting the 'rescan' value from scsi_scan_target to 'SCSI_SCAN_MANUAL'. And it updates all relevant callers to set the 'rescan' value to 'SCSI_SCAN_MANUAL' if invoked via the 'scan' option in sysfs. Signed-off-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
-
Finn Thain authored
I'm told that some targets are liable to disconnect a REQUEST SENSE command. Theoretically this would cause a command undergoing autosense to be moved onto the disconnected list. The bus reset handler must call complete_cmd() for these commands, otherwise the hostdata->sensing pointer will not get cleared. That would cause autosense processing to stall and a timeout or an incorrect scsi_eh_restore_cmnd() would eventually follow. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Reported-by:
Michael Schmitz <schmitzmic@gmail.com> Tested-by:
Ondrej Zary <linux@rainbow-software.org> Reviewed-by:
-
Finn Thain authored
Fix various issues: Comments about bus errors are incorrect. The PDMA asm must return the size of the memory access that faulted so the transfer count can be adjusted accordingly. A phase change may cause a bus error but should not be treated as failure. A bus error does not always imply a phase change and generally the transfer may continue. Scatter/gather doesn't seem to work with PDMA due to overruns. This is a pity because peak throughput seems to double with SG_ALL. Tested on a Mac LC III and a PowerBook 520. Signed-off-by:
-
Finn Thain authored
The benefit of limiting can_queue to 1 is that atari_scsi shares the ST DMA chip more fairly with other drivers (e.g. falcon-ide). Unfortunately, this can limit SCSI bus utilization. On systems without IDE, atari_scsi should issue SCSI commands whenever it can arbitrate for the bus. Make that possible by making can_queue configurable. Signed-off-by:
-
Finn Thain authored
This setting does not need to be conditional on Atari ST or TT. Signed-off-by:
-
