Use DEVICE_ATTR_RO/RW() helper macro instead of plain DEVICE_ATTR(), which
makes the code a bit shorter and easier to read.

Link: https://lore.kernel.org/r/20210603111739.11983-1-thunder.leizhen@huawei.comSigned-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Use DEVICE_ATTR_RO() helper macro instead of plain DEVICE_ATTR(), which
makes the code a bit shorter and easier to read.

Link: https://lore.kernel.org/r/20210603110902.11930-1-thunder.leizhen@huawei.comSigned-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The driver's IRQ handler supports shared IRQs, so request a shared IRQ
handler.

Link: https://lore.kernel.org/r/20210724205212.737328-1-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The driver is neither dependent on OF, nor it requires any OF headers.
Fix header block to clarify independence from OF.

Link: https://lore.kernel.org/r/http://lore.kernel.org/r/20210531084444.1785397-2-mkl@pengutronix.deSigned-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

In some configurations, mainly ACPI-based, the clock frequency of the
device is supplied by very well established 'clock-frequency'
property. Hence, try to get it from the property at last if no other
providers are available.

Link: https://lore.kernel.org/r/20210531084444.1785397-1-mkl@pengutronix.deSigned-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Since commit aee2b3cc ("can: tcan4x5x: fix bittiming const, use
common bittiming from m_can driver") there is no use of the device
specific bit timing parameters (m_can_classdev::bit_timing and struct
m_can_classdev::data_timing).

This patch removes the support for custom bit timing from the driver,
as the common bit timing works for all known IP core implementations.

Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Link: https://lore.kernel.org/r/20210616102811.2449426-7-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.

Link: https://lore.kernel.org/r/20210603073441.2983497-1-yangyingliang@huawei.comSigned-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Add support for implementing transceiver node as phy. The max_bitrate
is obtained by getting a phy attribute.

Link: https://lore.kernel.org/r/20210724174001.553047-1-mkl@pengutronix.deSigned-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Some transceivers need a configuration step (for example, pulling the
standby or enable lines) for them to start sending messages. The
transceiver can be implemented as a phy with the configuration done in
the phy driver. The bit rate limitation can the be obtained by the
driver using the phy node.

Document the above implementation in the bosch mcan bindings.

Link: https://lore.kernel.org/r/20210510052541.14168-2-a-govindraju@ti.comSigned-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can_validate() does a first check:

|	if (is_can_fd) {
|		if (!data[IFLA_CAN_BITTIMING] || !data[IFLA_CAN_DATA_BITTIMING])
|			return -EOPNOTSUPP;
|	}

If that first if succeeds, we know that if is_can_fd is true then
data[IFLA_CAN_BITTIMING is set.

However, the next if switch does not leverage on above knowledge and
redoes the check:

| 	if (data[IFLA_CAN_DATA_BITTIMING]) {
|		if (!is_can_fd || !data[IFLA_CAN_BITTIMING])
|		                   ^~~~~~~~~~~~~~~~~~~~~~~~
| 			return -EOPNOTSUPP;
| 	}

This patch removes that redundant check.

Link: https://lore.kernel.org/r/20210603151550.140727-2-mailhol.vincent@wanadoo.frSigned-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

When the FD is turned off through the netlink interface, the data bit
timing values still remain in data_bittiming and are displayed despite
of the feature being disabled.

Example:

| $ ip link set can0 type can bitrate 500000 dbitrate 2000000 fd on
| $ ip --details link show can0
| 1:  can0: <NOARP,ECHO> mtu 72 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10
|     link/can  promiscuity 0 minmtu 0 maxmtu 0
|     can <FD> state STOPPED restart-ms 0
| 	  bitrate 500000 sample-point 0.875
| 	  tq 12 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 1
| 	  ES582.1/ES584.1: tseg1 2..256 tseg2 2..128 sjw 1..128 brp 1..512 brp-inc 1
| 	  dbitrate 2000000 dsample-point 0.750
| 	  dtq 12 dprop-seg 14 dphase-seg1 15 dphase-seg2 10 dsjw 1
| 	  ES582.1/ES584.1: dtseg1 2..32 dtseg2 1..16 dsjw 1..8 dbrp 1..32 dbrp-inc 1
| 	  clock 80000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
|
| $ ip link set can0 type can bitrate 500000 fd off
| $ ip --details link show can0
| 1:  can0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10
|     link/can  promiscuity 0 minmtu 0 maxmtu 0
|     can state STOPPED restart-ms 0
| 	  bitrate 500000 sample-point 0.875
| 	  tq 12 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 1
| 	  ES582.1/ES584.1: tseg1 2..256 tseg2 2..128 sjw 1..128 brp 1..512 brp-inc 1
| 	  dbitrate 2000000 dsample-point 0.750
| 	  dtq 12 dprop-seg 14 dphase-seg1 15 dphase-seg2 10 dsjw 1
| 	  ES582.1/ES584.1: dtseg1 2..32 dtseg2 1..16 dsjw 1..8 dbrp 1..32 dbrp-inc 1
| 	  clock 80000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535

Remark: once FD is turned off, it is not possible to turn fd back on
and reuse the previously input data bit timing values:

| $ ip link set can0 type can bitrate 500000 fd on
| RTNETLINK answers: Operation not supported

This means that the user will need to re-configure the data bit timing
in order to turn fd on again.

Because old data bit timing values cannot be reused, this patch clears
priv->data_bit timing whenever FD is turned off. This way, the data
bit timing variables are not displayed anymore.

Link: https://lore.kernel.org/r/20210618081904.141114-2-mailhol.vincent@wanadoo.frSigned-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch fixes a typo in the documentation for struct can_tdc::tdcv.
The number "0" refers to automatic mode not the letter "O".

Further two grammar errors in the documentation for struct can_tdc are
fixed.

First grammar error: add a missing third person 's'.

Second grammar error: replace "such as" by "such that". The intent is
to give a condition, not an example.

Fixes: 289ea9e4 ("can: add new CAN FD bittiming parameters: Transmitter Delay Compensation (TDC)")
Link: https://lore.kernel.org/r/20210616095922.2430415-1-mkl@pengutronix.de
Link: https://lore.kernel.org/r/20210616124057.60723-1-mailhol.vincent@wanadoo.frCo-developed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt

After reading all CAN frames from the controller in the IRQ handler
and storing them into a skb_queue, the driver calls napi_schedule().
In the napi poll function the skb from the skb_queue are then pushed
into the networking stack.

However if napi_schedule() is called from a threaded IRQ handler this
triggers the following error:

| NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!

To avoid this, create a new rx-offload
function (can_rx_offload_threaded_irq_finish()) with a call to
local_bh_disable()/local_bh_enable() around the napi_schedule() call.

Convert all drivers that call can_rx_offload_irq_finish() from
threaded IRQ context to can_rx_offload_threaded_irq_finish().

Link: https://lore.kernel.org/r/20210724204745.736053-4-mkl@pengutronix.deSuggested-by: Daniel Glöckner <dg@emlix.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Instead of calling can_rx_offload_schedule() call napi_schedule()
directly. As this was the last use of can_rx_offload_schedule() remove
this helper function.

Link: https://lore.kernel.org/r/20210724204745.736053-3-mkl@pengutronix.deTested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Adding a skb to the skb_queue in rx-offload requires to take a lock.

This commit avoids this by adding an unlocked skb queue that is
appended at the end of the ISR. Having one lock at the end of the ISR
should be OK as the HW is empty, not about to overflow.

Link: https://lore.kernel.org/r/20210724204745.736053-2-mkl@pengutronix.deTested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Co-developed-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

In the j1939_xtp_rx_dat_one() function, there are 2 variables (skb and
se_skb) holding a skb. The control buffer of the skbs is accessed one
after the other, but using the same "skcb" variable.

To avoid confusion introduce a new variable "se_skcb" to access the
se_skb's control buffer as done in the rest of this file, too.

Cc: Robin van der Gracht <robin@protonic.nl>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20210616102811.2449426-6-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch changes the name of the "skcb" variable in
j1939_session_tx_dat() to "se_skcb" as it's the session skb's control
buffer. The same name is used in other functions for the session skb's
control buffer.

Cc: Robin van der Gracht <robin@protonic.nl>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20210616102811.2449426-5-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch changes the name of the "skb" variable in
j1939_session_completed() to "se_skb" as it's the session skb. The
same name is used in other functions for the session skb.

Cc: Robin van der Gracht <robin@protonic.nl>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20210616102811.2449426-4-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Replace the existing /* fall through */ comments the new
pseudo-keyword macro fallthrough.

Cc: Robin van der Gracht <robin@protonic.nl>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20210616102811.2449426-3-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch fixes a checkpatch warning about a long line and wrong
indention.

Cc: Robin van der Gracht <robin@protonic.nl>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20210616102811.2449426-2-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Correct a grammatical error.

Link: https://lore.kernel.org/r/20210611043933.17047-1-13145886936@163.comSigned-off-by: gushengxian <gushengxian@yulong.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Krzysztof Kozlowski says:

====================
nfc: constify data structures

Constify pointers to several data structures which are not modified by
NFC core or by drivers to make it slightly safer.  No functional impact
expected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Neither the core nor the drivers modify the passed pointer to struct
nfc_digital_ops, so make it a pointer to const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Neither the core nor the drivers modify the passed pointer to struct
nfc_llc_ops, so make it a pointer to const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Neither the core nor the drivers modify the passed pointer to struct
nfc_hci_ops, so make it a pointer to const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Neither the core nor the drivers modify the passed pointer to struct
nfc_ops, so make it a pointer to const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Neither the core nor the drivers modify the passed pointer to struct
nfc_hci_gate, so make it a pointer to const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Neither the core nor the drivers modify the passed pointer to struct
nfc_vendor_cmd, so make it a pointer to const for correctness and
safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver only reads len_seq and wait_tab variables.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Neither the core nor the drivers modify the passed pointer to struct
nfc_phy_ops (consisting of function pointers), so make it a pointer
to const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Neither the core nor the drivers modify the passed pointer to struct
nci_driver_ops (consisting of function pointers), so make it a pointer
to const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s3fwrn5 driver modifies static struct nci_ops only to set prop_ops.
Since prop_ops is build time constant with known size, it can be made
const.  This allows to removeo the function setting the prop_ops -
s3fwrn5_nci_get_prop_ops().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The struct nci_ops is modified by NFC core in only one case:
nci_allocate_device() receives too many proprietary commands (prop_ops)
to configure.  This is a build time known constrain, so a graceful
handling of such case is not necessary.

Instead, fail the nci_allocate_device() and add BUILD_BUG_ON() to places
which set these.

This allows to constify the struct nci_ops (consisting of function
pointers) for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The nci_send_cmd() payload argument is passed directly to skb_put_data()
which already accepts a pointer to const, so make it const as well for
correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Switchdev support can be disabled at compile time, and in that case,
struct sk_buff will not contain the offload_fwd_mark field.

To make the code in br_forward.c work in both cases, we do what is done
in other places and we create a helper function, with an empty shim
definition, that is implemented by the br_switchdev.o translation module.
This is always compiled if and only if CONFIG_NET_SWITCHDEV is y or m.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 47211192 ("net: bridge: switchdev: allow the TX data plane forwarding to be offloaded")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
1GbE Intel Wired LAN Driver Updates 2021-07-23

This series contains updates to igb and e100 drivers.

Grzegorz adds a timeout check to prevent possible infinite loop for igb.

Kees Cook adjusts memcpy() argument to represent the entire structure
to allow for appropriate bounds checking for igb and e100.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Eliminate the follow versioncheck warning:

./drivers/net/phy/mxl-gpy.c: 9 linux/version.h not needed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

File-scope "port100_protocol" array is read-only and passed as pointer
to const, so it can be made a const to increase code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Defer ttl decrement to optimize in tx_err case. There is no need
to decrease ttl in the case of goto tx_err.
Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A wwan link created via the wwan_create_default_link procedure is
never notified to the user (RTM_NEWLINK), causing issues with user
tools relying on such event to track network links (NetworkManager).

This is because the procedure misses a call to rtnl_configure_link(),
which sets the link as initialized and notifies the new link (cf
proper usage in __rtnl_newlink()).

Cc: stable@vger.kernel.org
Fixes: ca374290 ("wwan: core: support default netdev creation")
Suggested-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>