- 25 Oct, 2021 9 commits
-
-
Xin Long authored
Currently in net_ns_get_ownership() it may not be able to set uid or gid if make_kuid or make_kgid returns an invalid value, and an uninit-value issue can be triggered by this. This patch is to fix it by initializing the uid and gid before calling net_ns_get_ownership(), as it does in kobject_get_ownership() Fixes: e6dee9f3 ("net-sysfs: add netdev_change_owner()") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dongli Zhang authored
The tx queues are not stopped during the live migration. As a result, the ndo_start_xmit() may access netfront_info->queues which is freed by talk_to_netback()->xennet_destroy_queues(). This patch is to netif_device_detach() at the beginning of xen-netfront resuming, and netif_device_attach() at the end of resuming. CPU A CPU B talk_to_netback() -> if (info->queues) xennet_destroy_queues(info); to free netfront_info->queues xennet_start_xmit() to access netfront_info->queues -> err = xennet_create_queues(info, &num_queues); The idea is borrowed from virtio-net. Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Drivers call netdev_set_num_tc() and then netdev_set_tc_queue() to set the queue count and offset for each TC. So the queue count and offset for the TCs may be zero for a short period after dev->num_tc has been set. If a TX packet is being transmitted at this time in the code path netdev_pick_tx() -> skb_tx_hash(), skb_tx_hash() may see nonzero dev->num_tc but zero qcount for the TC. The while loop that keeps looping while hash >= qcount will not end. Fix it by checking the TC's qcount to be nonzero before using it. Fixes: eadec877 ("net: Add support for subordinate traffic classes to netdev_pick_tx") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Trevor Woerner authored
A hard hang is observed whenever the ethernet interface is brought down. If the PHY is stopped before the LPC core block is reset, the SoC will hang. Comparing lpc_eth_close() and lpc_eth_open() I re-arranged the ordering of the functions calls in lpc_eth_close() to reset the hardware before stopping the PHY. Fixes: b7370112 ("lpc32xx: Added ethernet driver") Signed-off-by: Trevor Woerner <twoerner@gmail.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andrew Lunn says: ==================== ksettings_{get|set} lock fixes Walter Stoll <Walter.Stoll@duagon.com> reported a race condition between "ethtool -s eth0 speed 100 duplex full autoneg off" and phylib reading the current status from the PHY. Both ksetting_get and ksetting_set fail the take the phydev mutex, and as a result, there is a small window of time where the phydev members are not self consistent. Patch 1 fixes phy_ethtool_ksettings_get by adding the needed lock. Patches 2 and 3 move code around and perform to refactoring, to allow patch 4 to fix phy_ethtool_ksettings_set by added the lock. Thanks go to Walter for the detailed origional report, suggested fix, and testing of the proposed patches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
There is a race condition where the PHY state machine can change members of the phydev structure at the same time userspace requests a change via ethtool. To prevent this, have phy_ethtool_ksettings_set take the PHY lock. Fixes: 2d55173e ("phy: add generic function to support ksetting support") Reported-by: Walter Stoll <Walter.Stoll@duagon.com> Suggested-by: Walter Stoll <Walter.Stoll@duagon.com> Tested-by: Walter Stoll <Walter.Stoll@duagon.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Split phy_start_aneg into a wrapper which takes the PHY lock, and a helper doing the real work. This will be needed when phy_ethtook_ksettings_set takes the lock. Fixes: 2d55173e ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
This allows it to make use of a helper which assume the PHY is already locked. Fixes: 2d55173e ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The PHY structure should be locked while copying information out if it, otherwise there is no guarantee of self consistency. Without the lock the PHY state machine could be updating the structure. Fixes: 2d55173e ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Oct, 2021 2 commits
-
-
Yuiko Oshino authored
The dma failure was reported in the raspberry pi github (issue #4117). https://github.com/raspberrypi/linux/issues/4117 The use of dma_set_mask_and_coherent fixes the issue. Tested on 32/64-bit raspberry pi CM4 and 64-bit ubuntu x86 PC with EVB-LAN7430. Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuiko Oshino authored
The driver needs to clean up and return when the initialization fails on resume. Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 22 Oct, 2021 17 commits
-
-
Florian Westphal authored
On my box I see a bunch of ping/nettest processes hanging around after fcntal-test.sh is done. Clean those up before netns deletion. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211021140247.29691-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Xin Long says: ==================== sctp: enhancements for the verification tag This patchset is to address CVE-2021-3772: A flaw was found in the Linux SCTP stack. A blind attacker may be able to kill an existing SCTP association through invalid chunks if the attacker knows the IP-addresses and port numbers being used and the attacker can send packets with spoofed IP addresses. This is caused by the missing VTAG verification for the received chunks and the incorrect vtag for the ABORT used to reply to these invalid chunks. This patchset is to go over all processing functions for the received chunks and do: 1. Make sure sctp_vtag_verify() is called firstly to verify the vtag from the received chunk and discard this chunk if it fails. With some exceptions: a. sctp_sf_do_5_1B_init()/5_2_2_dupinit()/9_2_reshutack(), processing INIT chunk, as sctphdr vtag is always 0 in INIT chunk. b. sctp_sf_do_5_2_4_dupcook(), processing dupicate COOKIE_ECHO chunk, as the vtag verification will be done by sctp_tietags_compare() and then it takes right actions according to the return. c. sctp_sf_shut_8_4_5(), processing SHUTDOWN_ACK chunk for cookie_wait and cookie_echoed state, as RFC demand sending a SHUTDOWN_COMPLETE even if the vtag verification failed. d. sctp_sf_ootb(), called in many types of chunks for closed state or no asoc, as the same reason to c. 2. Always use the vtag from the received INIT chunk to make the response ABORT in sctp_ootb_pkt_new(). 3. Fix the order for some checks and add some missing checks for the received chunk. This patch series has been tested with SCTP TAHI testing to make sure no regression caused on protocol conformance. ==================== Link: https://lore.kernel.org/r/cover.1634730082.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Xin Long authored
sctp_sf_ootb() is called when processing DATA chunk in closed state, and many other places are also using it. The vtag in the chunk's sctphdr should be verified, otherwise, as later in chunk length check, it may send abort with the existent asoc's vtag, which can be exploited by one to cook a malicious chunk to terminate a SCTP asoc. When fails to verify the vtag from the chunk, this patch sets asoc to NULL, so that the abort will be made with the vtag from the received chunk later. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Xin Long authored
sctp_sf_do_8_5_1_E_sa() is called when processing SHUTDOWN_ACK chunk in cookie_wait and cookie_echoed state. The vtag in the chunk's sctphdr should be verified, otherwise, as later in chunk length check, it may send abort with the existent asoc's vtag, which can be exploited by one to cook a malicious chunk to terminate a SCTP asoc. Note that when fails to verify the vtag from SHUTDOWN-ACK chunk, SHUTDOWN COMPLETE message will still be sent back to peer, but with the vtag from SHUTDOWN-ACK chunk, as said in 5) of rfc4960#section-8.4. While at it, also remove the unnecessary chunk length check from sctp_sf_shut_8_4_5(), as it's already done in both places where it calls sctp_sf_shut_8_4_5(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Xin Long authored
sctp_sf_violation() is called when processing HEARTBEAT_ACK chunk in cookie_wait state, and some other places are also using it. The vtag in the chunk's sctphdr should be verified, otherwise, as later in chunk length check, it may send abort with the existent asoc's vtag, which can be exploited by one to cook a malicious chunk to terminate a SCTP asoc. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Xin Long authored
1. In closed state: in sctp_sf_do_5_1D_ce(): When asoc is NULL, making packet for abort will use chunk's vtag in sctp_ootb_pkt_new(). But when asoc exists, vtag from the chunk should be verified before using peer.i.init_tag to make packet for abort in sctp_ootb_pkt_new(), and just discard it if vtag is not correct. 2. In the other states: in sctp_sf_do_5_2_4_dupcook(): asoc always exists, but duplicate cookie_echo's vtag will be handled by sctp_tietags_compare() and then take actions, so before that we only verify the vtag for the abort sent for invalid chunk length. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Xin Long authored
Currently INIT_ACK chunk in non-cookie_echoed state is processed in sctp_sf_discard_chunk() to send an abort with the existent asoc's vtag if the chunk length is not valid. But the vtag in the chunk's sctphdr is not verified, which may be exploited by one to cook a malicious chunk to terminal a SCTP asoc. sctp_sf_discard_chunk() also is called in many other places to send an abort, and most of those have this problem. This patch is to fix it by sending abort with the existent asoc's vtag only if the vtag from the chunk's sctphdr is verified in sctp_sf_discard_chunk(). Note on sctp_sf_do_9_1_abort() and sctp_sf_shutdown_pending_abort(), the chunk length has been verified before sctp_sf_discard_chunk(), so replace it with sctp_sf_discard(). On sctp_sf_do_asconf_ack() and sctp_sf_do_asconf(), move the sctp_chunk_length_valid check ahead of sctp_sf_discard_chunk(), then replace it with sctp_sf_discard(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Xin Long authored
This patch fixes the problems below: 1. In non-shutdown_ack_sent states: in sctp_sf_do_5_1B_init() and sctp_sf_do_5_2_2_dupinit(): chunk length check should be done before any checks that may cause to send abort, as making packet for abort will access the init_tag from init_hdr in sctp_ootb_pkt_new(). 2. In shutdown_ack_sent state: in sctp_sf_do_9_2_reshutack(): The same checks as does in sctp_sf_do_5_2_2_dupinit() is needed for sctp_sf_do_9_2_reshutack(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Xin Long authored
Currently Linux SCTP uses the verification tag of the existing SCTP asoc when failing to process and sending the packet with the ABORT chunk. This will result in the peer accepting the ABORT chunk and removing the SCTP asoc. One could exploit this to terminate a SCTP asoc. This patch is to fix it by always using the initiate tag of the received INIT chunk for the ABORT chunk to be sent. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vasily Averin authored
Christoph Paasch reports [1] about incorrect skb->truesize after skb_expand_head() call in ip6_xmit. This may happen because of two reasons: - skb_set_owner_w() for newly cloned skb is called too early, before pskb_expand_head() where truesize is adjusted for (!skb-sk) case. - pskb_expand_head() does not adjust truesize in (skb->sk) case. In this case sk->sk_wmem_alloc should be adjusted too. [1] https://lkml.org/lkml/2021/8/20/1082 Fixes: f1260ff1 ("skbuff: introduce skb_expand_head()") Fixes: 2d85a1b3 ("ipv6: ip6_finish_output2: set sk into newly allocated nskb") Reported-by: Christoph Paasch <christoph.paasch@gmail.com> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/644330dd-477e-0462-83bf-9f514c41edd1@virtuozzo.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'mac80211-for-net-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Two small fixes: * RCU misuse in scan processing in cfg80211 * missing size check for HE data in mac80211 mesh * tag 'mac80211-for-net-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: cfg80211: scan: fix RCU in cfg80211_add_nontrans_list() mac80211: mesh: fix HE operation element length check ==================== Link: https://lore.kernel.org/r/20211021154351.134297-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Nothing too crazy at the end of the cycle, the kmb modesetting fixes are probably a bit large but it's not a major driver, and its fixing monitor doesn't turn on type problems. Otherwise it's just a few minor patches, one ast regression revert, an msm power stability fix. ast: - fix regression with connector detect msm: - fix power stability issue msxfb: - fix crash on unload panel: - sync fix kmb: - modesetting fixes" * tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drm: Revert "drm/ast: Add detect function support" drm/kmb: Enable ADV bridge after modeset drm/kmb: Corrected typo in handle_lcd_irq drm/kmb: Disable change of plane parameters drm/kmb: Remove clearing DPHY regs drm/kmb: Limit supported mode to 1080p drm/kmb: Work around for higher system clock drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel drm: mxsfb: Fix NULL pointer dereference crash on unload drm/msm/devfreq: Restrict idle clamping to a618 for now
-
Mike Rapoport authored
Vladimir Zapolskiy reports: Commit a7259df7 ("memblock: make memblock_find_in_range method private") invokes a kernel panic while running kmemleak on OF platforms with nomaped regions: Unable to handle kernel paging request at virtual address fff000021e00000 [...] scan_block+0x64/0x170 scan_gray_list+0xe8/0x17c kmemleak_scan+0x270/0x514 kmemleak_write+0x34c/0x4ac The memory allocated from memblock is registered with kmemleak, but if it is marked MEMBLOCK_NOMAP it won't have linear map entries so an attempt to scan such areas will fault. Ideally, memblock_mark_nomap() would inform kmemleak to ignore MEMBLOCK_NOMAP memory, but it can be called before kmemleak interfaces operating on physical addresses can use __va() conversion. Make sure that functions that mark allocated memory as MEMBLOCK_NOMAP take care of informing kmemleak to ignore such memory. Link: https://lore.kernel.org/all/8ade5174-b143-d621-8c8e-dc6a1898c6fb@linaro.org Link: https://lore.kernel.org/all/c30ff0a2-d196-c50d-22f0-bd50696b1205@quicinc.com Fixes: a7259df7 ("memblock: make memblock_find_in_range method private") Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Tested-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Rapoport authored
Commit 6e44bd6d ("memblock: exclude NOMAP regions from kmemleak") breaks boot on EFI systems with kmemleak and VM_DEBUG enabled: efi: Processing EFI memory map: efi: 0x000090000000-0x000091ffffff [Conventional| | | | | | | | | | |WB|WT|WC|UC] efi: 0x000092000000-0x0000928fffff [Runtime Data|RUN| | | | | | | | | |WB|WT|WC|UC] ------------[ cut here ]------------ kernel BUG at mm/kmemleak.c:1140! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc6-next-20211019+ #104 pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kmemleak_free_part_phys+0x64/0x8c lr : kmemleak_free_part_phys+0x38/0x8c sp : ffff800011eafbc0 x29: ffff800011eafbc0 x28: 1fffff7fffb41c0d x27: fffffbfffda0e068 x26: 0000000092000000 x25: 1ffff000023d5f94 x24: ffff800011ed84d0 x23: ffff800011ed84c0 x22: ffff800011ed83d8 x21: 0000000000900000 x20: ffff800011782000 x19: 0000000092000000 x18: ffff800011ee0730 x17: 0000000000000000 x16: 0000000000000000 x15: 1ffff0000233252c x14: ffff800019a905a0 x13: 0000000000000001 x12: ffff7000023d5ed7 x11: 1ffff000023d5ed6 x10: ffff7000023d5ed6 x9 : dfff800000000000 x8 : ffff800011eaf6b7 x7 : 0000000000000001 x6 : ffff800011eaf6b0 x5 : 00008ffffdc2a12a x4 : ffff7000023d5ed7 x3 : 1ffff000023dbf99 x2 : 1ffff000022f0463 x1 : 0000000000000000 x0 : ffffffffffffffff Call trace: kmemleak_free_part_phys+0x64/0x8c memblock_mark_nomap+0x5c/0x78 reserve_regions+0x294/0x33c efi_init+0x2d0/0x490 setup_arch+0x80/0x138 start_kernel+0xa0/0x3ec __primary_switched+0xc0/0xc8 Code: 34000041 97d526e7 f9418e80 36000040 (d4210000) random: get_random_bytes called from print_oops_end_marker+0x34/0x80 with crng_init=0 ---[ end trace 0000000000000000 ]--- The crash happens because kmemleak_free_part_phys() tries to use __va() before memstart_addr is initialized and this triggers a VM_BUG_ON() in arch/arm64/include/asm/memory.h: Revert 6e44bd6d ("memblock: exclude NOMAP regions from kmemleak"), the issue it is fixing will be fixed differently. Reported-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ucounts fixes from Eric Biederman: "There has been one very hard to track down bug in the ucount code that we have been tracking since roughly v5.14 was released. Alex managed to find a reliable reproducer a few days ago and then I was able to instrument the code and figure out what the issue was. It turns out the sigqueue_alloc single atomic operation optimization did not play nicely with ucounts multiple level rlimits. It turned out that either sigqueue_alloc or sigqueue_free could be operating on multiple levels and trigger the conditions for the optimization on more than one level at the same time. To deal with that situation I have introduced inc_rlimit_get_ucounts and dec_rlimit_put_ucounts that just focuses on the optimization and the rlimit and ucount changes. While looking into the big bug I found I couple of other little issues so I am including those fixes here as well. When I have time I would very much like to dig into process ownership of the shared signal queue and see if we could pick a single owner for the entire queue so that all of the rlimits can count to that owner. That should entirely remove the need to call get_ucounts and put_ucounts in sigqueue_alloc and sigqueue_free. It is difficult because Linux unlike POSIX supports setuid that works on a single thread" * 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring ucounts: Proper error handling in set_cred_ucounts ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_creds ucounts: Fix signal ucount refcounting
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, and can. We'll have one more fix for a socket accounting regression, it's still getting polished. Otherwise things look fine. Current release - regressions: - revert "vrf: reset skb conntrack connection on VRF rcv", there are valid uses for previous behavior - can: m_can: fix iomap_read_fifo() and iomap_write_fifo() Current release - new code bugs: - mlx5: e-switch, return correct error code on group creation failure Previous releases - regressions: - sctp: fix transport encap_port update in sctp_vtag_verify - stmmac: fix E2E delay mechanism (in PTP timestamping) Previous releases - always broken: - netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr - netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of init - netfilter: ipvs: make global sysctl read-only in non-init netns - tcp: md5: fix selection between vrf and non-vrf keys - ipv6: count rx stats on the orig netdev when forwarding - bridge: mcast: use multicast_membership_interval for IGMPv3 - can: - j1939: fix UAF for rx_kref of j1939_priv abort sessions on receiving bad messages - isotp: fix TX buffer concurrent access in isotp_sendmsg() fix return error on FC timeout on TX path - ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited - hns3: schedule the polling again when allocation fails, prevent stalls - drivers: add missing of_node_put() when aborting for_each_available_child_of_node() - ptp: fix possible memory leak and UAF in ptp_clock_register() - e1000e: fix packet loss in burst mode on Tiger Lake and later - mlx5e: ipsec: fix more checksum offload issues" * tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits) usbnet: sanity check for maxpacket net: enetc: make sure all traffic classes can send large frames net: enetc: fix ethtool counter name for PM0_TERR ptp: free 'vclock_index' in ptp_clock_release() sfc: Don't use netif_info before net_device setup sfc: Export fibre-specific supported link modes net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags net/mlx5e: IPsec: Fix a misuse of the software parser's fields net/mlx5e: Fix vlan data lost during suspend flow net/mlx5: E-switch, Return correct error code on group creation failure net/mlx5: Lag, change multipath and bonding to be mutually exclusive ice: Add missing E810 device ids igc: Update I226_K device ID e1000e: Fix packet loss on Tiger Lake and later e1000e: Separate TGP board type from SPT ptp: Fix possible memory leak in ptp_clock_register() net: stmmac: Fix E2E delay mechanism nfc: st95hf: Make spi remove() callback return zero net: hns3: disable sriov before unload hclge layer net: hns3: fix vf reset workqueue cannot exit ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix a bug exposed by a previous fix, where running guests with certain SMT topologies could crash the host on Power8. - Fix atomic sleep warnings when re-onlining CPUs, when PREEMPT is enabled. Thanks to Nathan Lynch, Srikar Dronamraju, and Valentin Schneider. * tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/smp: do not decrement idle task preempt count in CPU offline powerpc/idle: Don't corrupt back chain when going idle
-
- 21 Oct, 2021 12 commits
-
-
Kim Phillips authored
This reverts commit aae74ff9, since it prevents my AMD Milan system from booting, with: [ 27.189558] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 27.197506] #PF: supervisor write access in kernel mode [ 27.203333] #PF: error_code(0x0002) - not-present page [ 27.209064] PGD 0 P4D 0 [ 27.211885] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 27.216744] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6+ #15 [ 27.223928] Hardware name: AMD Corporation ETHANOL_X/ETHANOL_X, BIOS RXM1006B 08/20/2021 [ 27.232955] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.238397] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.259350] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.265176] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.273134] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.281084] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.289043] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.297002] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.304961] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.313988] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.320396] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.328346] PKRU: 55555554 [ 27.331359] Call Trace: [ 27.334073] <IRQ> [ 27.336314] ? __queue_work+0x420/0x420 [ 27.340589] ? lapic_next_event+0x21/0x30 [ 27.345060] ? clockevents_program_event+0x8f/0xe0 [ 27.350402] __do_softirq+0xfb/0x2db [ 27.354388] irq_exit_rcu+0x98/0xd0 [ 27.358275] sysvec_apic_timer_interrupt+0xac/0xd0 [ 27.363620] </IRQ> [ 27.365955] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 27.371685] RIP: 0010:cpuidle_enter_state+0xcc/0x390 [ 27.377292] Code: 3d 01 79 0a 50 e8 44 ed 77 ff 49 89 c6 0f 1f 44 00 00 31 ff e8 f5 f8 77 ff 80 7d d7 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ff 0f 88 17 01 00 00 49 63 c7 4c 2b 75 c8 48 8d 14 40 48 8d [ 27.398243] RSP: 0018:ffffffffb0e03dc8 EFLAGS: 00000246 [ 27.404069] RAX: ffffa0c44de00000 RBX: 0000000000000001 RCX: 000000000000001f [ 27.412028] RDX: 0000000000000000 RSI: ffffffffb0bafc1f RDI: ffffffffb0bbdb81 [ 27.419986] RBP: ffffffffb0e03e00 R08: 00000006549f8f3f R09: ffffffffb1065200 [ 27.427935] R10: ffffa0c44de27ae4 R11: ffffa0c44de27ac4 R12: ffffa0c5634cb000 [ 27.435894] R13: ffffffffb1065200 R14: 00000006549f8f3f R15: 0000000000000001 [ 27.443854] ? cpuidle_enter_state+0xbb/0x390 [ 27.448712] cpuidle_enter+0x2e/0x40 [ 27.452695] call_cpuidle+0x23/0x40 [ 27.456584] do_idle+0x1f0/0x270 [ 27.460181] cpu_startup_entry+0x20/0x30 [ 27.464553] rest_init+0xd4/0xe0 [ 27.468149] arch_call_rest_init+0xe/0x1b [ 27.472619] start_kernel+0x6bc/0x6e2 [ 27.476764] x86_64_start_reservations+0x24/0x26 [ 27.481912] x86_64_start_kernel+0x75/0x79 [ 27.486477] secondary_startup_64_no_verify+0xb0/0xbb [ 27.492111] Modules linked in: kvm_amd(+) kvm ipmi_si(+) ipmi_devintf rapl wmi_bmof ipmi_msghandler input_leds ccp k10temp mac_hid sch_fq_codel msr ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm drm_kms_helper crct10dif_pclmul crc32_pclmul ghash_clmulni_intel syscopyarea aesni_intel sysfillrect crypto_simd sysimgblt fb_sys_fops cryptd hid_generic cec nvme ahci usbhid drm e1000e nvme_core hid libahci i2c_piix4 wmi [ 27.551789] CR2: 0000000000000000 [ 27.555482] ---[ end trace 897987dfe93dccc6 ]--- [ 27.560630] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.566069] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.587021] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.592848] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.600808] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.608765] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.616716] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.624673] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.632624] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.641650] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.648159] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.656119] PKRU: 55555554 [ 27.659133] Kernel panic - not syncing: Fatal exception in interrupt [ 29.030411] Shutting down cpus with NMI [ 29.034699] Kernel Offset: 0x2e600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 29.046790] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Since unreliable, found by bisecting for KASAN's use-after-free in enqueue_timer+0x4f/0x1e0, where the timer callback is called. Reported-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Fixes: aae74ff9 ("drm/ast: Add detect function support") Link: https://lore.kernel.org/lkml/0f7871be-9ca6-5ae4-3a40-5db9a8fb2365@amd.com/ Cc: Ainux <ainux.wang@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: sterlingteng@gmail.com Cc: chenhuacai@kernel.org Cc: Chuck Lever III <chuck.lever@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Jon Grimm <jon.grimm@amd.com> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: linux-kernel <linux-kernel@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211021153006.92983-1-kim.phillips@amd.com
-
Dave Airlie authored
Merge tag 'drm-misc-fixes-2021-10-21-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.15-rc7: - Rebased, to remove vc4 patches. - Fix mxsfb crash on unload. - Use correct sync parameters for Feixin K101-IM2BYL02. - Assorted kmb modeset/atomic fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e66eaf89-b9b9-41f5-d0d2-dad7e59fabb5@linux.intel.com
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
One more fix for v5.15, to work around a power stability issue on a630 (and possibly others) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs1WPLthmd=ToDcEHm=u-7O38RAVJ2XwRoS8xPmC520vg@mail.gmail.com
-
Oliver Neukum authored
maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up. V2: fixed typo in log and stylistic issues Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+76bb1d34ffa0adc03baa@syzkaller.appspotmail.com Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211021122944.21816-1-oneukum@suse.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
The enetc driver does not implement .ndo_change_mtu, instead it configures the MAC register field PTC{Traffic Class}MSDUR[MAXSDU] statically to a large value during probe time. The driver used to configure only the max SDU for traffic class 0, and that was fine while the driver could only use traffic class 0. But with the introduction of mqprio, sending a large frame into any other TC than 0 is broken. This patch fixes that by replicating per traffic class the static configuration done in enetc_configure_port_mac(). Fixes: cbe9e835 ("enetc: Enable TC offloading with mqprio") Reported-by: Richie Pearn <richard.pearn@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20211020173340.1089992-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
There are two counters named "MAC tx frames", one of them is actually incorrect. The correct name for that counter should be "MAC tx error frames", which is symmetric to the existing "MAC rx error frames". Fixes: 16eb4c85 ("enetc: Add ethtool statistics") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20211020165206.1069889-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yang Yingliang authored
'vclock_index' is accessed from sysfs, it shouled be freed in release function, so move it from ptp_clock_unregister() to ptp_clock_release(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Erik Ekman authored
Use pci_info instead to avoid unnamed/uninitialized noise: [197088.688729] sfc 0000:01:00.0: Solarflare NIC detected [197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F [197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed [197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support Inspired by fa44821a ("sfc: don't use netif_info et al before net_device is registered") from Heiner Kallweit. Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Erik Ekman authored
The 1/10GbaseT modes were set up for cards with SFP+ cages in 3497ed8c ("sfc: report supported link speeds on SFP connections"). 10GbaseT was likely used since no 10G fibre mode existed. The missing fibre modes for 1/10G were added to ethtool.h in 5711a982 ("net: ethtool: add support for 1000BaseX and missing 10G link modes") shortly thereafter. The user guide available at https://support-nic.xilinx.com/wp/drivers lists support for the following cable and transceiver types in section 2.9: - QSFP28 100G Direct Attach Cables - QSFP28 100G SR Optical Transceivers (with SR4 modules listed) - SFP28 25G Direct Attach Cables - SFP28 25G SR Optical Transceivers - QSFP+ 40G Direct Attach Cables - QSFP+ 40G Active Optical Cables - QSFP+ 40G SR4 Optical Transceivers - QSFP+ to SFP+ Breakout Direct Attach Cables - QSFP+ to SFP+ Breakout Active Optical Cables - SFP+ 10G Direct Attach Cables - SFP+ 10G SR Optical Transceivers - SFP+ 10G LR Optical Transceivers - SFP 1000BASE‐T Transceivers - 1G Optical Transceivers (From user guide issue 28. Issue 16 which also includes older cards like SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.) Regarding SFP+ 10GBASE‐T transceivers the latest guide says: "Solarflare adapters do not support 10GBASE‐T transceiver modules." Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR). Before: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes After: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Supports Wake-on: g Wake-on: d Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter fixes for net: 1) Crash due to missing initialization of timer data in xt_IDLETIMER, from Juhee Kang. 2) NF_CONNTRACK_SECMARK should be bool in Kconfig, from Vegard Nossum. 3) Skip netdev events on netns removal, from Florian Westphal. 4) Add testcase to show port shadowing via UDP, also from Florian. 5) Remove pr_debug() code in ip6t_rt, this fixes a crash due to unsafe access to non-linear skbuff, from Xin Long. 6) Make net/ipv4/vs/debug_level read-only from non-init netns, from Antoine Tenart. 7) Remove bogus invocation to bash in selftests/netfilter/nft_flowtable.sh also from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-fixes-2021-10-20 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-10-20 This series contains updates to e1000e, igc, and ice drivers. Sasha fixes an issue with dropped packets on Tiger Lake platforms for e1000e and corrects a device ID for igc. Tony adds missing E810 device IDs for ice. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-