Skip to content

L
linux
Switch branch/tag
  1. 21 Mar, 2024 2 commits
  3. 20 Mar, 2024 10 commits
    • David S. Miller's avatar
      Merge branch 'octeontx2-pf-mbox-fixes' · 9c6a5954
      David S. Miller authored 
      Subbaraya Sundeep says:

====================
octeontx2-pf: RVU Mailbox fixes

This patchset fixes the problems related to RVU mailbox.
During long run tests some times VF commands like setting
MTU or toggling interface fails because VF mailbox is timedout
waiting for response from PF.

Below are the fixes
Patch 1: There are two types of messages in RVU mailbox namely up and down
messages. Down messages are synchronous messages where a PF/VF sends
a message to AF and AF replies back with response. UP messages are
notifications and are asynchronous like AF sending link events to
PF. When VF sends a down message to PF, PF forwards to AF and sends
the response from AF back to VF. PF has to forward VF messages since
there is no path in hardware for VF to send directly to AF.
There is one mailbox interrupt from AF to PF when raised could mean
two scenarios one is where AF sending reply to PF for a down message
sent by PF and another one is AF sending up message asynchronously
when link changed for that PF. Receiving the up message interrupt while
PF is in middle of forwarding down message causes mailbox errors.
Fix this by receiver detecting the type of message from the mbox data register
set by sender.

Patch 2:
During VF driver remove, VF has to wait until last message is
completed and then turn off mailbox interrupts from PF.

Patch 3:
Do not use ordered workqueue for message processing since multiple works are
queued simultaneously by all the VFs and PF link UP messages.

Patch 4:
When sending link event to VF by PF check whether VF is really up to
receive this message.

Patch 5:
In AF driver, use separate interrupt handlers for the AF-VF interrupt and
AF-PF interrupt. Sometimes both interrupts are raised to two CPUs at same
time and both CPUs execute same function at same time corrupting the data.

v2 changes:
	Added missing mutex unlock in error path in patch 1
	Refactored if else logic in patch 1 as suggested by Paolo Abeni
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9c6a5954
    • Subbaraya Sundeep's avatar
      octeontx2-af: Use separate handlers for interrupts · 50e60de3
      Subbaraya Sundeep authored 
      For PF to AF interrupt vector and VF to AF vector same
interrupt handler is registered which is causing race condition.
When two interrupts are raised to two CPUs at same time
then two cores serve same event corrupting the data.

Fixes: 7304ac45 ("octeontx2-af: Add mailbox IRQ and msg handlers")
Signed-off-by: default avatarSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      50e60de3
    • Subbaraya Sundeep's avatar
      octeontx2-pf: Send UP messages to VF only when VF is up. · dfcf6355
      Subbaraya Sundeep authored 
      When PF sending link status messages to VF, it is possible
that by the time link_event_task work function is executed
VF might have brought down. Hence before sending VF link
status message check whether VF is up to receive it.

Fixes: ad513ed9 ("octeontx2-vf: Link event notification support")
Signed-off-by: default avatarSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dfcf6355
    • Subbaraya Sundeep's avatar
      octeontx2-pf: Use default max_active works instead of one · 7558ce0d
      Subbaraya Sundeep authored 
      Only one execution context for the workqueue used for PF and
VFs mailbox communication is incorrect since multiple works are
queued simultaneously by all the VFs and PF link UP messages.
Hence use default number of execution contexts by passing zero
as max_active to alloc_workqueue function. With this fix in place,
modify UP messages also to wait until completion.

Fixes: d424b6c0 ("octeontx2-pf: Enable SRIOV and added VF mbox handling")
Signed-off-by: default avatarSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7558ce0d
    • Subbaraya Sundeep's avatar
      octeontx2-pf: Wait till detach_resources msg is complete · cbf2f249
      Subbaraya Sundeep authored 
      During VF driver remove, a message is sent to detach VF
resources to PF but VF is not waiting until message is
complete. Also mailbox interrupts need to be turned off
after the detach resource message is complete. This patch
fixes that problem.

Fixes: 05fcc9e0 ("octeontx2-pf: Attach NIX and NPA block LFs")
Signed-off-by: default avatarSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cbf2f249
    • Subbaraya Sundeep's avatar
      octeontx2: Detect the mbox up or down message via register · a88e0f93
      Subbaraya Sundeep authored 
      A single line of interrupt is used to receive up notifications
and down reply messages from AF to PF (similarly from PF to its VF).
PF acts as bridge and forwards VF messages to AF and sends respsones
back from AF to VF. When an async event like link event is received
by up message when PF is in middle of forwarding VF message then
mailbox errors occur because PF state machine is corrupted.
Since VF is a separate driver or VF driver can be in a VM it is
not possible to serialize from the start of communication at VF.
Hence to differentiate between type of messages at PF this patch makes
sender to set mbox data register with distinct values for up and down
messages. Sender also checks whether previous interrupt is received
before triggering current interrupt by waiting for mailbox data register
to become zero.

Fixes: 5a6d7c9d ("octeontx2-pf: Mailbox communication with AF")
Signed-off-by: default avatarSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a88e0f93
    • Jakub Kicinski's avatar
      Merge tag 'ipsec-2024-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec · 94e3ca2f
      Jakub Kicinski authored 
      Steffen Klassert says:

====================
pull request (net): ipsec 2024-03-19

1) Fix possible page_pool leak triggered by esp_output.
   From Dragos Tatulea.

2) Fix UDP encapsulation in software GSO path.
   From Leon Romanovsky.

* tag 'ipsec-2024-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
  xfrm: Allow UDP encapsulation only in offload modes
  net: esp: fix bad handling of pages from page_pool
====================

Link: https://lore.kernel.org/r/20240319110151.409825-1-steffen.klassert@secunet.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      94e3ca2f
    • Jiri Pirko's avatar
      devlink: fix port new reply cmd type · 78a2f5e6
      Jiri Pirko authored 
      Due to a c&p error, port new reply fills-up cmd with wrong value,
any other existing port command replies and notifications.

Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.

Skimmed through devlink userspace implementations, none of them cares
about this cmd value.
Reported-by: default avatarChenyuan Yang <chenyuan0y@gmail.com>
Closes: https://lore.kernel.org/all/ZfZcDxGV3tSy4qsV@cy-server/
Fixes: cd76dcd6 ("devlink: Support add and delete devlink port")
Signed-off-by: default avatarJiri Pirko <jiri@nvidia.com>
Reviewed-by: default avatarParav Pandit <parav@nvidia.com>
Reviewed-by: default avatarKalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20240318091908.2736542-1-jiri@resnulli.usSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      78a2f5e6
    • Kuniyuki Iwashima's avatar
      tcp: Clear req->syncookie in reqsk_alloc(). · 956c0d61
      Kuniyuki Iwashima authored 
      syzkaller reported a read of uninit req->syncookie. [0]

Originally, req->syncookie was used only in tcp_conn_request()
to indicate if we need to encode SYN cookie in SYN+ACK, so the
field remains uninitialised in other places.

The commit 695751e3 ("bpf: tcp: Handle BPF SYN Cookie in
cookie_v[46]_check().") added another meaning in ACK path;
req->syncookie is set true if SYN cookie is validated by BPF
kfunc.

After the change, cookie_v[46]_check() always read req->syncookie,
but it is not initialised in the normal SYN cookie case as reported
by KMSAN.

Let's make sure we always initialise req->syncookie in reqsk_alloc().

[0]:
BUG: KMSAN: uninit-value in cookie_v4_check+0x22b7/0x29e0
 net/ipv4/syncookies.c:477
 cookie_v4_check+0x22b7/0x29e0 net/ipv4/syncookies.c:477
 tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1855 [inline]
 tcp_v4_do_rcv+0xb17/0x10b0 net/ipv4/tcp_ipv4.c:1914
 tcp_v4_rcv+0x4ce4/0x5420 net/ipv4/tcp_ipv4.c:2322
 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
 ip_local_deliver_finish+0x332/0x500 net/ipv4/ip_input.c:233
 NF_HOOK include/linux/netfilter.h:314 [inline]
 ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
 dst_input include/net/dst.h:460 [inline]
 ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:449
 NF_HOOK include/linux/netfilter.h:314 [inline]
 ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:569
 __netif_receive_skb_one_core net/core/dev.c:5538 [inline]
 __netif_receive_skb+0x319/0x9e0 net/core/dev.c:5652
 process_backlog+0x480/0x8b0 net/core/dev.c:5981
 __napi_poll+0xe7/0x980 net/core/dev.c:6632
 napi_poll net/core/dev.c:6701 [inline]
 net_rx_action+0x89d/0x1820 net/core/dev.c:6813
 __do_softirq+0x1c0/0x7d7 kernel/softirq.c:554
 do_softirq+0x9a/0x100 kernel/softirq.c:455
 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382
 local_bh_enable include/linux/bottom_half.h:33 [inline]
 rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline]
 __dev_queue_xmit+0x2776/0x52c0 net/core/dev.c:4362
 dev_queue_xmit include/linux/netdevice.h:3091 [inline]
 neigh_hh_output include/net/neighbour.h:526 [inline]
 neigh_output include/net/neighbour.h:540 [inline]
 ip_finish_output2+0x187a/0x1b70 net/ipv4/ip_output.c:235
 __ip_finish_output+0x287/0x810
 ip_finish_output+0x4b/0x550 net/ipv4/ip_output.c:323
 NF_HOOK_COND include/linux/netfilter.h:303 [inline]
 ip_output+0x15f/0x3f0 net/ipv4/ip_output.c:433
 dst_output include/net/dst.h:450 [inline]
 ip_local_out net/ipv4/ip_output.c:129 [inline]
 __ip_queue_xmit+0x1e93/0x2030 net/ipv4/ip_output.c:535
 ip_queue_xmit+0x60/0x80 net/ipv4/ip_output.c:549
 __tcp_transmit_skb+0x3c70/0x4890 net/ipv4/tcp_output.c:1462
 tcp_transmit_skb net/ipv4/tcp_output.c:1480 [inline]
 tcp_write_xmit+0x3ee1/0x8900 net/ipv4/tcp_output.c:2792
 __tcp_push_pending_frames net/ipv4/tcp_output.c:2977 [inline]
 tcp_send_fin+0xa90/0x12e0 net/ipv4/tcp_output.c:3578
 tcp_shutdown+0x198/0x1f0 net/ipv4/tcp.c:2716
 inet_shutdown+0x33f/0x5b0 net/ipv4/af_inet.c:923
 __sys_shutdown_sock net/socket.c:2425 [inline]
 __sys_shutdown net/socket.c:2437 [inline]
 __do_sys_shutdown net/socket.c:2445 [inline]
 __se_sys_shutdown+0x2a4/0x440 net/socket.c:2443
 __x64_sys_shutdown+0x6c/0xa0 net/socket.c:2443
 do_syscall_64+0xd5/0x1f0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

Uninit was stored to memory at:
 reqsk_alloc include/net/request_sock.h:148 [inline]
 inet_reqsk_alloc+0x651/0x7a0 net/ipv4/tcp_input.c:6978
 cookie_tcp_reqsk_alloc+0xd4/0x900 net/ipv4/syncookies.c:328
 cookie_tcp_check net/ipv4/syncookies.c:388 [inline]
 cookie_v4_check+0x289f/0x29e0 net/ipv4/syncookies.c:420
 tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1855 [inline]
 tcp_v4_do_rcv+0xb17/0x10b0 net/ipv4/tcp_ipv4.c:1914
 tcp_v4_rcv+0x4ce4/0x5420 net/ipv4/tcp_ipv4.c:2322
 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
 ip_local_deliver_finish+0x332/0x500 net/ipv4/ip_input.c:233
 NF_HOOK include/linux/netfilter.h:314 [inline]
 ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
 dst_input include/net/dst.h:460 [inline]
 ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:449
 NF_HOOK include/linux/netfilter.h:314 [inline]
 ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:569
 __netif_receive_skb_one_core net/core/dev.c:5538 [inline]
 __netif_receive_skb+0x319/0x9e0 net/core/dev.c:5652
 process_backlog+0x480/0x8b0 net/core/dev.c:5981
 __napi_poll+0xe7/0x980 net/core/dev.c:6632
 napi_poll net/core/dev.c:6701 [inline]
 net_rx_action+0x89d/0x1820 net/core/dev.c:6813
 __do_softirq+0x1c0/0x7d7 kernel/softirq.c:554

Uninit was created at:
 __alloc_pages+0x9a7/0xe00 mm/page_alloc.c:4592
 __alloc_pages_node include/linux/gfp.h:238 [inline]
 alloc_pages_node include/linux/gfp.h:261 [inline]
 alloc_slab_page mm/slub.c:2175 [inline]
 allocate_slab mm/slub.c:2338 [inline]
 new_slab+0x2de/0x1400 mm/slub.c:2391
 ___slab_alloc+0x1184/0x33d0 mm/slub.c:3525
 __slab_alloc mm/slub.c:3610 [inline]
 __slab_alloc_node mm/slub.c:3663 [inline]
 slab_alloc_node mm/slub.c:3835 [inline]
 kmem_cache_alloc+0x6d3/0xbe0 mm/slub.c:3852
 reqsk_alloc include/net/request_sock.h:131 [inline]
 inet_reqsk_alloc+0x66/0x7a0 net/ipv4/tcp_input.c:6978
 tcp_conn_request+0x484/0x44e0 net/ipv4/tcp_input.c:7135
 tcp_v4_conn_request+0x16f/0x1d0 net/ipv4/tcp_ipv4.c:1716
 tcp_rcv_state_process+0x2e5/0x4bb0 net/ipv4/tcp_input.c:6655
 tcp_v4_do_rcv+0xbfd/0x10b0 net/ipv4/tcp_ipv4.c:1929
 tcp_v4_rcv+0x4ce4/0x5420 net/ipv4/tcp_ipv4.c:2322
 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
 ip_local_deliver_finish+0x332/0x500 net/ipv4/ip_input.c:233
 NF_HOOK include/linux/netfilter.h:314 [inline]
 ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
 dst_input include/net/dst.h:460 [inline]
 ip_sublist_rcv_finish net/ipv4/ip_input.c:580 [inline]
 ip_list_rcv_finish net/ipv4/ip_input.c:631 [inline]
 ip_sublist_rcv+0x15f3/0x17f0 net/ipv4/ip_input.c:639
 ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:674
 __netif_receive_skb_list_ptype net/core/dev.c:5581 [inline]
 __netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5629
 __netif_receive_skb_list net/core/dev.c:5681 [inline]
 netif_receive_skb_list_internal+0x106c/0x16f0 net/core/dev.c:5773
 gro_normal_list include/net/gro.h:438 [inline]
 napi_complete_done+0x425/0x880 net/core/dev.c:6113
 virtqueue_napi_complete drivers/net/virtio_net.c:465 [inline]
 virtnet_poll+0x149d/0x2240 drivers/net/virtio_net.c:2211
 __napi_poll+0xe7/0x980 net/core/dev.c:6632
 napi_poll net/core/dev.c:6701 [inline]
 net_rx_action+0x89d/0x1820 net/core/dev.c:6813
 __do_softirq+0x1c0/0x7d7 kernel/softirq.c:554

CPU: 0 PID: 16792 Comm: syz-executor.2 Not tainted 6.8.0-syzkaller-05562-g61387b8d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024

Fixes: 695751e3 ("bpf: tcp: Handle BPF SYN Cookie in cookie_v[46]_check().")
Reported-by: default avatarsyzkaller <syzkaller@googlegroups.com>
Reported-by: default avatarEric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/bpf/CANn89iKdN9c+C_2JAUbc+VY3DDQjAQukMtiBbormAmAk9CdvQA@mail.gmail.com/Signed-off-by: default avatarKuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Acked-by: default avatarMartin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240315224710.55209-1-kuniyu@amazon.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      956c0d61
    • Thinh Tran's avatar
      net/bnx2x: Prevent access to a freed page in page_pool · d27e2da9
      Thinh Tran authored 
      Fix race condition leading to system crash during EEH error handling

During EEH error recovery, the bnx2x driver's transmit timeout logic
could cause a race condition when handling reset tasks. The
bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(),
which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload()
SGEs are freed using bnx2x_free_rx_sge_range(). However, this could
overlap with the EEH driver's attempt to reset the device using
bnx2x_io_slot_reset(), which also tries to free SGEs. This race
condition can result in system crashes due to accessing freed memory
locations in bnx2x_free_rx_sge()

799  static inline void bnx2x_free_rx_sge(struct bnx2x *bp,
800				struct bnx2x_fastpath *fp, u16 index)
801  {
802	struct sw_rx_page *sw_buf = &fp->rx_page_ring[index];
803     struct page *page = sw_buf->page;
....
where sw_buf was set to NULL after the call to dma_unmap_page()
by the preceding thread.

    EEH: Beginning: 'slot_reset'
    PCI 0011:01:00.0#10000: EEH: Invoking bnx2x->slot_reset()
    bnx2x: [bnx2x_io_slot_reset:14228(eth1)]IO slot reset initializing...
    bnx2x 0011:01:00.0: enabling device (0140 -> 0142)
    bnx2x: [bnx2x_io_slot_reset:14244(eth1)]IO slot reset --> driver unload
    Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
    BUG: Kernel NULL pointer dereference on read at 0x00000000
    Faulting instruction address: 0xc0080000025065fc
    Oops: Kernel access of bad area, sig: 11 [#1]
    .....
    Call Trace:
    [c000000003c67a20] [c00800000250658c] bnx2x_io_slot_reset+0x204/0x610 [bnx2x] (unreliable)
    [c000000003c67af0] [c0000000000518a8] eeh_report_reset+0xb8/0xf0
    [c000000003c67b60] [c000000000052130] eeh_pe_report+0x180/0x550
    [c000000003c67c70] [c00000000005318c] eeh_handle_normal_event+0x84c/0xa60
    [c000000003c67d50] [c000000000053a84] eeh_event_handler+0xf4/0x170
    [c000000003c67da0] [c000000000194c58] kthread+0x1c8/0x1d0
    [c000000003c67e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64

To solve this issue, we need to verify page pool allocations before
freeing.

Fixes: 4cace675 ("bnx2x: Alloc 4k fragment for each rx ring buffer element")
Signed-off-by: default avatarThinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: default avatarJiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240315205535.1321-1-thinhtr@linux.ibm.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      d27e2da9
  5. 19 Mar, 2024 14 commits
  7. 18 Mar, 2024 9 commits
    • Abhishek Chauhan's avatar
      Revert "net: Re-use and set mono_delivery_time bit for userspace tstamp packets" · 35c3e279
      Abhishek Chauhan authored 
      This reverts commit 885c36e5.

The patch currently broke the bpf selftest test_tc_dtime because
uapi field __sk_buff->tstamp_type depends on skb->mono_delivery_time which
does not necessarily mean mono with the original fix as the bit was re-used
for userspace timestamp as well to avoid tstamp reset in the forwarding
path. To solve this we need to keep mono_delivery_time as is and
introduce another bit called user_delivery_time and fall back to the
initial proposal of setting the user_delivery_time bit based on
sk_clockid set from userspace.

Fixes: 885c36e5 ("net: Re-use and set mono_delivery_time bit for userspace tstamp packets")
Link: https://lore.kernel.org/netdev/bc037db4-58bb-4861-ac31-a361a93841d3@linux.dev/Signed-off-by: default avatarAbhishek Chauhan <quic_abchauha@quicinc.com>
Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarMartin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      35c3e279
    • Arınç ÜNAL's avatar
      net: dsa: mt7530: prevent possible incorrect XTAL frequency selection · f490c492
      Arınç ÜNAL authored 
      On MT7530, the HT_XTAL_FSEL field of the HWTRAP register stores a 2-bit
value that represents the frequency of the crystal oscillator connected to
the switch IC. The field is populated by the state of the ESW_P4_LED_0 and
ESW_P4_LED_0 pins, which is done right after reset is deasserted.

  ESW_P4_LED_0    ESW_P3_LED_0    Frequency
  -----------------------------------------
  0               0               Reserved
  0               1               20MHz
  1               0               40MHz
  1               1               25MHz

On MT7531, the XTAL25 bit of the STRAP register stores this. The LAN0LED0
pin is used to populate the bit. 25MHz when the pin is high, 40MHz when
it's low.

These pins are also used with LEDs, therefore, their state can be set to
something other than the bootstrapping configuration. For example, a link
may be established on port 3 before the DSA subdriver takes control of the
switch which would set ESW_P3_LED_0 to high.

Currently on mt7530_setup() and mt7531_setup(), 1000 - 1100 usec delay is
described between reset assertion and deassertion. Some switch ICs in real
life conditions cannot always have these pins set back to the bootstrapping
configuration before reset deassertion in this amount of delay. This causes
wrong crystal frequency to be selected which puts the switch in a
nonfunctional state after reset deassertion.

The tests below are conducted on an MT7530 with a 40MHz crystal oscillator
by Justin Swartz.

With a cable from an active peer connected to port 3 before reset, an
incorrect crystal frequency (0b11 = 25MHz) is selected:

                      [1]                  [3]     [5]
                      :                    :       :
              _____________________________         __________________
ESW_P4_LED_0                               |_______|
              _____________________________
ESW_P3_LED_0                               |__________________________

                       :                  : :     :
                       :                  : [4]...:
                       :                  :
                       [2]................:

[1] Reset is asserted.
[2] Period of 1000 - 1100 usec.
[3] Reset is deasserted.
[4] Period of 315 usec. HWTRAP register is populated with incorrect
    XTAL frequency.
[5] Signals reflect the bootstrapped configuration.

Increase the delay between reset_control_assert() and
reset_control_deassert(), and gpiod_set_value_cansleep(priv->reset, 0) and
gpiod_set_value_cansleep(priv->reset, 1) to 5000 - 5100 usec. This amount
ensures a higher possibility that the switch IC will have these pins back
to the bootstrapping configuration before reset deassertion.

With a cable from an active peer connected to port 3 before reset, the
correct crystal frequency (0b10 = 40MHz) is selected:

                      [1]        [2-1]     [3]     [5]
                      :          :         :       :
              _____________________________         __________________
ESW_P4_LED_0                               |_______|
              ___________________           _______
ESW_P3_LED_0                     |_________|       |__________________

                       :          :       : :     :
                       :          [2-2]...: [4]...:
                       [2]................:

[1] Reset is asserted.
[2] Period of 5000 - 5100 usec.
[2-1] ESW_P3_LED_0 goes low.
[2-2] Remaining period of 5000 - 5100 usec.
[3] Reset is deasserted.
[4] Period of 310 usec. HWTRAP register is populated with bootstrapped
    XTAL frequency.
[5] Signals reflect the bootstrapped configuration.

ESW_P3_LED_0 low period before reset deassertion:

              5000 usec
            - 5100 usec
    TEST     RESET HOLD
       #         (usec)
  ---------------------
       1           5410
       2           5440
       3           4375
       4           5490
       5           5475
       6           4335
       7           4370
       8           5435
       9           4205
      10           4335
      11           3750
      12           3170
      13           4395
      14           4375
      15           3515
      16           4335
      17           4220
      18           4175
      19           4175
      20           4350

     Min           3170
     Max           5490

  Median       4342.500
     Avg       4466.500

Revert commit 2920dd92 ("net: dsa: mt7530: disable LEDs before reset").
Changing the state of pins via reset assertion is simpler and more
efficient than doing so by setting the LED controller off.

Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Fixes: c288575f ("net: dsa: mt7530: Add the support of MT7531 switch")
Co-developed-by: default avatarJustin Swartz <justin.swartz@risingedge.co.za>
Signed-off-by: default avatarJustin Swartz <justin.swartz@risingedge.co.za>
Signed-off-by: default avatarArınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f490c492
    • David S. Miller's avatar
      Merge branch 'veth-xdp-gro' · ba77f6e2
      David S. Miller authored 
      Ignat Korchagin says:

====================
net: veth: ability to toggle GRO and XDP independently

It is rather confusing that GRO is automatically enabled, when an XDP program
is attached to a veth interface. Moreover, it is not possible to disable GRO
on a veth, if an XDP program is attached (which might be desirable in some use
cases).

Make GRO and XDP independent for a veth interface.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ba77f6e2
    • Ignat Korchagin's avatar
      selftests: net: veth: test the ability to independently manipulate GRO and XDP · ba5a6476
      Ignat Korchagin authored 
      We should be able to independently flip either XDP or GRO states and toggling
one should not affect the other.

Adjust other tests as well that had implicit expectation that GRO would be
automatically enabled.
Signed-off-by: default avatarIgnat Korchagin <ignat@cloudflare.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ba5a6476
    • Ignat Korchagin's avatar
      net: veth: do not manipulate GRO when using XDP · d7db7775
      Ignat Korchagin authored 
      Commit d3256efd ("veth: allow enabling NAPI even without XDP") tried to fix
the fact that GRO was not possible without XDP, because veth did not use NAPI
without XDP. However, it also introduced the behaviour that GRO is always
enabled, when XDP is enabled.

While it might be desired for most cases, it is confusing for the user at best
as the GRO flag suddenly changes, when an XDP program is attached. It also
introduces some complexities in state management as was partially addressed in
commit fe9f8013 ("net: veth: clear GRO when clearing XDP even when down").

But the biggest problem is that it is not possible to disable GRO at all, when
an XDP program is attached, which might be needed for some use cases.

Fix this by not touching the GRO flag on XDP enable/disable as the code already
supports switching to NAPI if either GRO or XDP is requested.

Link: https://lore.kernel.org/lkml/20240311124015.38106-1-ignat@cloudflare.com/
Fixes: d3256efd ("veth: allow enabling NAPI even without XDP")
Fixes: fe9f8013 ("net: veth: clear GRO when clearing XDP even when down")
Signed-off-by: default avatarIgnat Korchagin <ignat@cloudflare.com>
Reviewed-by: default avatarToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d7db7775
    • Leon Romanovsky's avatar
      xfrm: Allow UDP encapsulation only in offload modes · 773bb766
      Leon Romanovsky authored 
      The missing check of x->encap caused to the situation where GSO packets
were created with UDP encapsulation.

As a solution return the encap check for non-offloaded SA.

Fixes: 983a73da ("xfrm: Pass UDP encapsulation in TX packet offload")
Closes: https://lore.kernel.org/all/a650221ae500f0c7cf496c61c96c1b103dcb6f67.camel@redhat.comReported-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
      773bb766
    • Dragos Tatulea's avatar
      net: esp: fix bad handling of pages from page_pool · c3198822
      Dragos Tatulea authored 
      When the skb is reorganized during esp_output (!esp->inline), the pages
coming from the original skb fragments are supposed to be released back
to the system through put_page. But if the skb fragment pages are
originating from a page_pool, calling put_page on them will trigger a
page_pool leak which will eventually result in a crash.

This leak can be easily observed when using CONFIG_DEBUG_VM and doing
ipsec + gre (non offloaded) forwarding:

  BUG: Bad page state in process ksoftirqd/16  pfn:1451b6
  page:00000000de2b8d32 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1451b6000 pfn:0x1451b6
  flags: 0x200000000000000(node=0|zone=2)
  page_type: 0xffffffff()
  raw: 0200000000000000 dead000000000040 ffff88810d23c000 0000000000000000
  raw: 00000001451b6000 0000000000000001 00000000ffffffff 0000000000000000
  page dumped because: page_pool leak
  Modules linked in: ip_gre gre mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay zram zsmalloc fuse [last unloaded: mlx5_core]
  CPU: 16 PID: 96 Comm: ksoftirqd/16 Not tainted 6.8.0-rc4+ #22
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x36/0x50
   bad_page+0x70/0xf0
   free_unref_page_prepare+0x27a/0x460
   free_unref_page+0x38/0x120
   esp_ssg_unref.isra.0+0x15f/0x200
   esp_output_tail+0x66d/0x780
   esp_xmit+0x2c5/0x360
   validate_xmit_xfrm+0x313/0x370
   ? validate_xmit_skb+0x1d/0x330
   validate_xmit_skb_list+0x4c/0x70
   sch_direct_xmit+0x23e/0x350
   __dev_queue_xmit+0x337/0xba0
   ? nf_hook_slow+0x3f/0xd0
   ip_finish_output2+0x25e/0x580
   iptunnel_xmit+0x19b/0x240
   ip_tunnel_xmit+0x5fb/0xb60
   ipgre_xmit+0x14d/0x280 [ip_gre]
   dev_hard_start_xmit+0xc3/0x1c0
   __dev_queue_xmit+0x208/0xba0
   ? nf_hook_slow+0x3f/0xd0
   ip_finish_output2+0x1ca/0x580
   ip_sublist_rcv_finish+0x32/0x40
   ip_sublist_rcv+0x1b2/0x1f0
   ? ip_rcv_finish_core.constprop.0+0x460/0x460
   ip_list_rcv+0x103/0x130
   __netif_receive_skb_list_core+0x181/0x1e0
   netif_receive_skb_list_internal+0x1b3/0x2c0
   napi_gro_receive+0xc8/0x200
   gro_cell_poll+0x52/0x90
   __napi_poll+0x25/0x1a0
   net_rx_action+0x28e/0x300
   __do_softirq+0xc3/0x276
   ? sort_range+0x20/0x20
   run_ksoftirqd+0x1e/0x30
   smpboot_thread_fn+0xa6/0x130
   kthread+0xcd/0x100
   ? kthread_complete_and_exit+0x20/0x20
   ret_from_fork+0x31/0x50
   ? kthread_complete_and_exit+0x20/0x20
   ret_from_fork_asm+0x11/0x20
   </TASK>

The suggested fix is to introduce a new wrapper (skb_page_unref) that
covers page refcounting for page_pool pages as well.

Cc: stable@vger.kernel.org
Fixes: 6a5bcd84 ("page_pool: Allow drivers to hint on SKB recycling")
Reported-and-tested-by: default avatarAnatoli N.Chechelnickiy <Anatoli.Chechelnickiy@m.interpipe.biz>
Reported-by: default avatarIan Kumlien <ian.kumlien@gmail.com>
Link: https://lore.kernel.org/netdev/CAA85sZvvHtrpTQRqdaOx6gd55zPAVsqMYk_Lwh4Md5knTq7AyA@mail.gmail.comSigned-off-by: default avatarDragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: default avatarMina Almasry <almasrymina@google.com>
Reviewed-by: default avatarJakub Kicinski <kuba@kernel.org>
Acked-by: default avatarIlias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
      c3198822
    • Eric Dumazet's avatar
      packet: annotate data-races around ignore_outgoing · 6ebfad33
      Eric Dumazet authored 
      ignore_outgoing is read locklessly from dev_queue_xmit_nit()
and packet_getsockopt()

Add appropriate READ_ONCE()/WRITE_ONCE() annotations.

syzbot reported:

BUG: KCSAN: data-race in dev_queue_xmit_nit / packet_setsockopt

write to 0xffff888107804542 of 1 bytes by task 22618 on cpu 0:
 packet_setsockopt+0xd83/0xfd0 net/packet/af_packet.c:4003
 do_sock_setsockopt net/socket.c:2311 [inline]
 __sys_setsockopt+0x1d8/0x250 net/socket.c:2334
 __do_sys_setsockopt net/socket.c:2343 [inline]
 __se_sys_setsockopt net/socket.c:2340 [inline]
 __x64_sys_setsockopt+0x66/0x80 net/socket.c:2340
 do_syscall_64+0xd3/0x1d0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

read to 0xffff888107804542 of 1 bytes by task 27 on cpu 1:
 dev_queue_xmit_nit+0x82/0x620 net/core/dev.c:2248
 xmit_one net/core/dev.c:3527 [inline]
 dev_hard_start_xmit+0xcc/0x3f0 net/core/dev.c:3547
 __dev_queue_xmit+0xf24/0x1dd0 net/core/dev.c:4335
 dev_queue_xmit include/linux/netdevice.h:3091 [inline]
 batadv_send_skb_packet+0x264/0x300 net/batman-adv/send.c:108
 batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127
 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:392 [inline]
 batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:420 [inline]
 batadv_iv_send_outstanding_bat_ogm_packet+0x3f0/0x4b0 net/batman-adv/bat_iv_ogm.c:1700
 process_one_work kernel/workqueue.c:3254 [inline]
 process_scheduled_works+0x465/0x990 kernel/workqueue.c:3335
 worker_thread+0x526/0x730 kernel/workqueue.c:3416
 kthread+0x1d1/0x210 kernel/kthread.c:388
 ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243

value changed: 0x00 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 27 Comm: kworker/u8:1 Tainted: G        W          6.8.0-syzkaller-08073-g480e035f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet

Fixes: fa788d98 ("packet: add sockopt to ignore outgoing packets")
Reported-by: syzbot+c669c1136495a2e7c31f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/CANn89i+Z7MfbkBLOv=p7KZ7=K1rKHO4P1OL5LYDCtBiyqsa9oQ@mail.gmail.com/T/#tSigned-off-by: default avatarEric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: default avatarWillem de Bruijn <willemb@google.com>
Reviewed-by: default avatarJason Xing <kerneljasonxing@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6ebfad33
    • Herve Codina's avatar
      net: wan: fsl_qmc_hdlc: Fix module compilation · badc9e33
      Herve Codina authored 
      The fsl_qmc_driver does not compile as module:
  error: ‘qmc_hdlc_driver’ undeclared here (not in a function);
    405 | MODULE_DEVICE_TABLE(of, qmc_hdlc_driver);
        |                         ^~~~~~~~~~~~~~~

Fix the typo.

Fixes: b40f00ecd463 ("net: wan: Add support for QMC HDLC")
Reported-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Closes: https://lore.kernel.org/linux-kernel/87ttl93f7i.fsf@mail.lhotse/Signed-off-by: default avatarHerve Codina <herve.codina@bootlin.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      badc9e33
  9. 15 Mar, 2024 2 commits
  11. 14 Mar, 2024 3 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7