- 17 Oct, 2021 1 commit
-
-
Tetsuo Handa authored
As with commit 8b52d8be ("loop: reorder loop_exit"), unregister_blkdev() needs to be called first in order to avoid calling brd_alloc() from brd_probe() after brd_del_one() from brd_exit(). Then, we can avoid holding global mutex during add_disk()/del_gendisk() as with commit 1c500ad7 ("loop: reduce the loop_ctl_mutex scope"). Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/e205f13d-18ff-a49c-0988-7de6ea5ff823@i-love.sakura.ne.jpSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 16 Oct, 2021 6 commits
-
-
Christoph Hellwig authored
q->disk becomes invalid after the gendisk is removed. Work around this by caching the dev_t for the tracepoints. The real fix would be to properly tear down the I/O schedulers with the gendisk, but that is a much more invasive change. Signed-off-by:
Yi Zhang <yi.zhang@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
Don't switch back to percpu mode to avoid the double RCU grace period when tearing down SCSI devices. After removing the disk only passthrough commands can be send anyway. Suggested-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210929071241.934472-6-hch@lst.deTested-by:
-
Christoph Hellwig authored
Instead of delaying draining of file system I/O related items like the blk-qos queues, the integrity read workqueue and timeouts only when the request_queue is removed, do that when del_gendisk is called. This is important for SCSI where the upper level drivers that control the gendisk are separate entities, and the disk can be freed much earlier than the request_queue, or can even be unbound without tearing down the queue. Fixes: edb0872f ("block: move the bdi from the request_queue to the gendisk") Reported-by:
-
Christoph Hellwig authored
To prepare for fixing a gendisk shutdown race, open code the blk_queue_enter logic in bio_queue_enter. This also removes the pointless flags translation. Signed-off-by:
-
Christoph Hellwig authored
Factor out the code to try to get q_usage_counter without blocking into a separate helper. Both to improve code readability and to prepare for splitting bio_queue_enter from blk_queue_enter. Signed-off-by:
-
Christoph Hellwig authored
Ensure all bios check the current values of the queue under freeze protection, i.e. to make sure the zero capacity set by del_gendisk is actually seen before dispatching to the driver. Signed-off-by:
-
- 14 Oct, 2021 2 commits
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.15: - fix the abort command id (Keith Busch) - nvme: fix per-namespace chardev deletion (Adam Manzanares)" * tag 'nvme-5.15-2021-10-14' of git://git.infradead.org/nvme: nvme: fix per-namespace chardev deletion nvme-pci: Fix abort command id
-
Adam Manzanares authored
Decrease reference count of chardevice during char device deletion in order to fix a memory leak. Add a release callabck for the device associated chardev and move ida_simple_remove into the release function. Fixes: 2637baed ("nvme: introduce generic per-namespace chardev") Reported-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Adam Manzanares <a.manzanares@samsung.com> Reviewed-by:
Javier González <javier@javigon.com> Tested-by:
-
- 12 Oct, 2021 1 commit
-
-
Dan Carpenter authored
These variables are printed on the error path if match_int() fails so they have to be initialized. Fixes: 2958a995 ("block/rnbd-clt: Support polling mode for IO latency optimization") Fixes: 1eb54f8f ("block/rnbd: client: sysfs interface functions") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Gioh Kim <gi-oh.kim@ionos.com> Link: https://lore.kernel.org/r/20211012084443.GA31472@kiliSigned-off-by:
-
- 07 Oct, 2021 1 commit
-
-
Keith Busch authored
The request tag is no longer the only component of the command id. Fixes: e7006de6 ("nvme: code command_id with a genctr for use-after-free validation") Reviewed-by:
Keith Busch <kbusch@kernel.org>
-
- 04 Oct, 2021 1 commit
-
-
Johannes Thumshirn authored
While debugging an issue we've found that $DEBUGFS/block/$disk/state doesn't decode QUEUE_FLAG_HCTX_ACTIVE but only displays its numerical value. Add QUEUE_FLAG(HCTX_ACTIVE) to the blk_queue_flag_name array so it'll get decoded properly. Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/4351076388918075bd80ef07756f9d2ce63be12c.1633332053.git.johannes.thumshirn@wdc.comSigned-off-by:
-
- 02 Oct, 2021 1 commit
-
-
Tetsuo Handa authored
syzbot is reporting use-after-free read at bdev_free_inode() [1], for kfree() from __alloc_disk_node() is called before bdev_free_inode() (which is called after RCU grace period) reads bdev->bd_disk and calls kfree(bdev->bd_disk). Fix use-after-free read followed by double kfree() problem by making sure that bdev->bd_disk is NULL when calling iput(). Link: https://syzkaller.appspot.com/bug?extid=8281086e8a6fbfbd952a [1] Reported-by:
syzbot <syzbot+8281086e8a6fbfbd952a@syzkaller.appspotmail.com> Signed-off-by:
-
- 30 Sep, 2021 1 commit
-
-
Nick Desaulniers authored
commit fad7cd33 ("nbd: add the check to prevent overflow in __nbd_ioctl()") raised an issue from the fallback helpers added in commit f0907827 ("compiler.h: enable builtin overflow checkers and add fallback code") ERROR: modpost: "__divdi3" [drivers/block/nbd.ko] undefined! As Stephen Rothwell notes: The added check_mul_overflow() call is being passed 64 bit values. COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW is not set for this build (see include/linux/overflow.h). Specifically, the helpers for checking whether the results of a multiplication overflowed (__unsigned_mul_overflow, __signed_add_overflow) use the division operator when !COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW. This is problematic for 64b operands on 32b hosts. This was fixed upstream by commit 76ae8474 ("Documentation: raise minimum supported version of GCC to 5.1") which is not suitable to be backported to stable. Further, __builtin_mul_overflow() would emit a libcall to a compiler-rt-only symbol when compiling with clang < 14 for 32b targets. ld.lld: error: undefined symbol: __mulodi4 In order to keep stable buildable with GCC 4.9 and clang < 14, modify struct nbd_config to instead track the number of bits of the block size; reconstructing the block size using runtime checked shifts that are not problematic for those compilers and in a ways that can be backported to stable. In nbd_set_size, we do validate that the value of blksize must be a power of two (POT) and is in the range of [512, PAGE_SIZE] (both inclusive). This does modify the debugfs interface. Cc: stable@vger.kernel.org Cc: Arnd Bergmann <arnd@kernel.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://github.com/ClangBuiltLinux/linux/issues/1438 Link: https://lore.kernel.org/all/20210909182525.372ee687@canb.auug.org.au/ Link: https://lore.kernel.org/stable/CAHk-=whiQBofgis_rkniz8GBP9wZtSZdcDEffgSLO62BUGV3gg@mail.gmail.com/Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by:
Nathan Chancellor <nathan@kernel.org> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Suggested-by:
Kees Cook <keescook@chromium.org> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Suggested-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20210920232533.4092046-1-ndesaulniers@google.comSigned-off-by:
-
- 28 Sep, 2021 1 commit
-
-
Jens Axboe authored
This reverts commit 2d52c58b. We have had several folks complain that this causes hangs for them, which is especially problematic as the commit has also hit stable already. As no resolution seems to be forthcoming right now, revert the patch. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214503 Fixes: 2d52c58b ("block, bfq: honor already-setup queue merges") Signed-off-by:
-
- 27 Sep, 2021 1 commit
-
-
Keith Busch authored
Some apple controllers use the command id as an index to implementation specific data structures and will fail if the value is out of bounds. The nvme driver's recently introduced command sequence number breaks this controller. Provide a quirk so these spec incompliant controllers can function as before. The driver will not have the ability to detect bad completions when this quirk is used, but we weren't previously checking this anyway. The quirk bit was selected so that it can readily apply to stable. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214509 Cc: Sven Peter <sven@svenpeter.dev> Reported-by:
Orlando Chamberlain <redecorating@protonmail.com> Reported-by:
Aditya Garg <gargaditya08@live.com> Signed-off-by:
Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20210927154306.387437-1-kbusch@kernel.orgSigned-off-by:
-
- 24 Sep, 2021 4 commits
-
-
Ming Lei authored
When running ->fallocate(), blkdev_fallocate() should hold mapping->invalidate_lock to prevent page cache from being accessed, otherwise stale data may be read in page cache. Without this patch, blktests block/009 fails sometimes. With this patch, block/009 can pass always. Also as Jan pointed out, no pages can be created in the discarded area while you are holding the invalidate_lock, so remove the 2nd truncate_bdev_range(). Cc: Jan Kara <jack@suse.cz> Signed-off-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210923023751.1441091-1-ming.lei@redhat.comSigned-off-by:
-
Zhihao Cheng authored
There is an use-after-free problem triggered by following process: P1(sda) P2(sdb) echo 0 > /sys/block/sdb/trace/enable blk_trace_remove_queue synchronize_rcu blk_trace_free relay_close rcu_read_lock __blk_add_trace trace_note_tsk (Iterate running_trace_list) relay_close_buf relay_destroy_buf kfree(buf) trace_note(sdb's bt) relay_reserve buf->offset <- nullptr deference (use-after-free) !!! rcu_read_unlock [ 502.714379] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 502.715260] #PF: supervisor read access in kernel mode [ 502.715903] #PF: error_code(0x0000) - not-present page [ 502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0 [ 502.717252] Oops: 0000 [#1] SMP [ 502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360 [ 502.732872] Call Trace: [ 502.733193] __blk_add_trace.cold+0x137/0x1a3 [ 502.733734] blk_add_trace_rq+0x7b/0xd0 [ 502.734207] blk_add_trace_rq_issue+0x54/0xa0 [ 502.734755] blk_mq_start_request+0xde/0x1b0 [ 502.735287] scsi_queue_rq+0x528/0x1140 ... [ 502.742704] sg_new_write.isra.0+0x16e/0x3e0 [ 502.747501] sg_ioctl+0x466/0x1100 Reproduce method: ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sda, BLKTRACESTART) ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sdb, BLKTRACESTART) echo 0 > /sys/block/sdb/trace/enable & // Add delay(mdelay/msleep) before kernel enters blk_trace_free() ioctl$SG_IO(/dev/sda, SG_IO, ...) // Enters trace_note_tsk() after blk_trace_free() returned // Use mdelay in rcu region rather than msleep(which may schedule out) Remove blk_trace from running_list before calling blk_trace_free() by sysfs if blk_trace is at Blktrace_running state. Fixes: c71a8961 ("blktrace: add ftrace plugin") Signed-off-by:Zhihao Cheng <chengzhihao1@huawei.com> Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.comSigned-off-by:
-
Ming Lei authored
rq_qos framework is only applied on request based driver, so: 1) rq_qos_done_bio() needn't to be called for bio based driver 2) rq_qos_done_bio() needn't to be called for bio which isn't tracked, such as bios ended from error handling code. Especially in bio_endio(): 1) request queue is referred via bio->bi_bdev->bd_disk->queue, which may be gone since request queue refcount may not be held in above two cases 2) q->rq_qos may be freed in blk_cleanup_queue() when calling into __rq_qos_done_bio() Fix the potential kernel panic by not calling rq_qos_ops->done_bio if the bio isn't tracked. This way is safe because both ioc_rqos_done_bio() and blkcg_iolatency_done_bio() are nop if the bio isn't tracked. Reported-by:
Yu Kuai <yukuai3@huawei.com> Cc: tj@kernel.org Signed-off-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20210924110704.1541818-1-ming.lei@redhat.comSigned-off-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.15: - keep ctrl->namespaces ordered (me) - fix incorrect h2cdata pdu offset accounting in nvme-tcp (Sagi Grimberg) - handled updated hw_queues in nvme-fc more carefully (Daniel Wagner, James Smart)" * tag 'nvme-5.15-2021-09-24' of git://git.infradead.org/nvme: nvme: keep ctrl->namespaces ordered nvme-tcp: fix incorrect h2cdata pdu offset accounting nvme-fc: remove freeze/unfreeze around update_nr_hw_queues nvme-fc: avoid race between time out and tear down nvme-fc: update hardware queues before using them
-
- 22 Sep, 2021 2 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/song/mdJens Axboe authored
Pull MD fix from Song. * 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: fix a lock order reversal in md_alloc
-
Christoph Hellwig authored
Commit b0140891 ("md: Fix race when creating a new md device.") not only moved assigning mddev->gendisk before calling add_disk, which fixes the races described in the commit log, but also added a mddev->open_mutex critical section over add_disk and creation of the md kobj. Adding a kobject after add_disk is racy vs deleting the gendisk right after adding it, but md already prevents against that by holding a mddev->active reference. On the other hand taking this lock added a lock order reversal with what is not disk->open_mutex (used to be bdev->bd_mutex when the commit was added) for partition devices, which need that lock for the internal open for the partition scan, and a recent commit also takes it for non-partitioned devices, leading to further lockdep splatter. Fixes: b0140891 ("md: Fix race when creating a new md device.") Fixes: d6263387 ("block: support delayed holder registration") Reported-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Song Liu <songliubraving@fb.com>
-
- 21 Sep, 2021 5 commits
-
-
Christoph Hellwig authored
Various places in the nvme code that rely on ctrl->namespace to be ordered. Ensure that the namespae is inserted into the list at the right position from the start instead of sorting it after the fact. Fixes: 540c801c ("NVMe: Implement namespace list scanning") Reported-by:
Anton Eidelman <anton.eidelman@gmail.com> Signed-off-by:
Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com>
-
Sagi Grimberg authored
When the controller sends us multiple r2t PDUs in a single request we need to account for it correctly as our send/recv context run concurrently (i.e. we get a new r2t with r2t_offset before we updated our iterator and req->data_sent marker). This can cause wrong offsets to be sent to the controller. To fix that, we will first know that this may happen only in the send sequence of the last page, hence we will take the r2t_offset to the h2c PDU data_offset, and in nvme_tcp_try_send_data loop, we make sure to increment the request markers also when we completed a PDU but we are expecting more r2t PDUs as we still did not send the entire data of the request. Fixes: 825619b0 ("nvme-tcp: fix possible use-after-completion") Reported-by:
Nowak, Lukasz <Lukasz.Nowak@Dell.com> Tested-by:
-
James Smart authored
Remove the freeze/unfreeze around changes to the number of hardware queues. Study and retest has indicated there are no ios that can be active at this point so there is nothing to freeze. nvme-fc is draining the queues in the shutdown and error recovery path in __nvme_fc_abort_outstanding_ios. This patch primarily reverts 88e837ed "nvme-fc: wait for queues to freeze before calling update_hr_hw_queues". It's not an exact revert as it leaves the adjusting of hw queues only if the count changes. Signed-off-by:
James Smart <jsmart2021@gmail.com> [dwagner: added explanation why no IO is pending] Signed-off-by:
Daniel Wagner <dwagner@suse.de> Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
James Smart authored
To avoid race between time out and tear down, in tear down process, first we quiesce the queue, and then delete the timer and cancel the time out work for the queue. This patch merges the admin and io sync ops into the queue teardown logic as shown in the RDMA patch 3017013d "nvme-rdma: avoid race between time out and tear down". There is no teardown_lock in nvme-fc. Signed-off-by:
-
Daniel Wagner authored
In case the number of hardware queues changes, we need to update the tagset and the mapping of ctx to hctx first. If we try to create and connect the I/O queues first, this operation will fail (target will reject the connect call due to the wrong number of queues) and hence we bail out of the recreate function. Then we will to try the very same operation again, thus we don't make any progress. Signed-off-by:
-
- 15 Sep, 2021 6 commits
-
-
Li Jinlin authored
KASAN reports a use-after-free report when doing fuzz test: [693354.104835] ================================================================== [693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160 [693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338 [693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147 [693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018 [693354.105612] Call Trace: [693354.105621] dump_stack+0xf1/0x19b [693354.105626] ? show_regs_print_info+0x5/0x5 [693354.105634] ? printk+0x9c/0xc3 [693354.105638] ? cpumask_weight+0x1f/0x1f [693354.105648] print_address_description+0x70/0x360 [693354.105654] kasan_report+0x1b2/0x330 [693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105670] bfq_io_set_weight_legacy+0xd3/0x160 [693354.105675] ? bfq_cpd_init+0x20/0x20 [693354.105683] cgroup_file_write+0x3aa/0x510 [693354.105693] ? ___slab_alloc+0x507/0x540 [693354.105698] ? cgroup_file_poll+0x60/0x60 [693354.105702] ? 0xffffffff89600000 [693354.105708] ? usercopy_abort+0x90/0x90 [693354.105716] ? mutex_lock+0xef/0x180 [693354.105726] kernfs_fop_write+0x1ab/0x280 [693354.105732] ? cgroup_file_poll+0x60/0x60 [693354.105738] vfs_write+0xe7/0x230 [693354.105744] ksys_write+0xb0/0x140 [693354.105749] ? __ia32_sys_read+0x50/0x50 [693354.105760] do_syscall_64+0x112/0x370 [693354.105766] ? syscall_return_slowpath+0x260/0x260 [693354.105772] ? do_page_fault+0x9b/0x270 [693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0 [693354.105784] ? enter_from_user_mode+0x30/0x30 [693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.105875] Allocated by task 1453337: [693354.106001] kasan_kmalloc+0xa0/0xd0 [693354.106006] kmem_cache_alloc_node_trace+0x108/0x220 [693354.106010] bfq_pd_alloc+0x96/0x120 [693354.106015] blkcg_activate_policy+0x1b7/0x2b0 [693354.106020] bfq_create_group_hierarchy+0x1e/0x80 [693354.106026] bfq_init_queue+0x678/0x8c0 [693354.106031] blk_mq_init_sched+0x1f8/0x460 [693354.106037] elevator_switch_mq+0xe1/0x240 [693354.106041] elevator_switch+0x25/0x40 [693354.106045] elv_iosched_store+0x1a1/0x230 [693354.106049] queue_attr_store+0x78/0xb0 [693354.106053] kernfs_fop_write+0x1ab/0x280 [693354.106056] vfs_write+0xe7/0x230 [693354.106060] ksys_write+0xb0/0x140 [693354.106064] do_syscall_64+0x112/0x370 [693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106114] Freed by task 1453336: [693354.106225] __kasan_slab_free+0x130/0x180 [693354.106229] kfree+0x90/0x1b0 [693354.106233] blkcg_deactivate_policy+0x12c/0x220 [693354.106238] bfq_exit_queue+0xf5/0x110 [693354.106241] blk_mq_exit_sched+0x104/0x130 [693354.106245] __elevator_exit+0x45/0x60 [693354.106249] elevator_switch_mq+0xd6/0x240 [693354.106253] elevator_switch+0x25/0x40 [693354.106257] elv_iosched_store+0x1a1/0x230 [693354.106261] queue_attr_store+0x78/0xb0 [693354.106264] kernfs_fop_write+0x1ab/0x280 [693354.106268] vfs_write+0xe7/0x230 [693354.106271] ksys_write+0xb0/0x140 [693354.106275] do_syscall_64+0x112/0x370 [693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106329] The buggy address belongs to the object at ffff888be0a35580 which belongs to the cache kmalloc-1k of size 1024 [693354.106736] The buggy address is located 228 bytes inside of 1024-byte region [ffff888be0a35580, ffff888be0a35980) [693354.107114] The buggy address belongs to the page: [693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0 [693354.107606] flags: 0x17ffffc0008100(slab|head) [693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080 [693354.108020] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000 [693354.108278] page dumped because: kasan: bad access detected [693354.108511] Memory state around the buggy address: [693354.108671] ffff888be0a35500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [693354.116396] ffff888be0a35580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.124473] >ffff888be0a35600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.132421] ^ [693354.140284] ffff888be0a35680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.147912] ffff888be0a35700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.155281] ================================================================== blkgs are protected by both queue and blkcg locks and holding either should stabilize them. However, the path of destroying blkg policy data is only protected by queue lock in blkcg_activate_policy()/blkcg_deactivate_policy(). Other tasks can get the blkg policy data before the blkg policy data is destroyed, and use it after destroyed, which will result in a use-after-free. CPU0 CPU1 blkcg_deactivate_policy spin_lock_irq(&q->queue_lock) bfq_io_set_weight_legacy spin_lock_irq(&blkcg->lock) blkg_to_bfqg(blkg) pd_to_bfqg(blkg->pd[pol->plid]) ^^^^^^blkg->pd[pol->plid] != NULL bfqg != NULL pol->pd_free_fn(blkg->pd[pol->plid]) pd_to_bfqg(blkg->pd[pol->plid]) bfqg_put(bfqg) kfree(bfqg) blkg->pd[pol->plid] = NULL spin_unlock_irq(q->queue_lock); bfq_group_set_weight(bfqg, val, 0) bfqg->entity.new_weight ^^^^^^trigger uaf here spin_unlock_irq(&blkcg->lock); Fix by grabbing the matching blkcg lock before trying to destroy blkg policy data. Suggested-by:Li Jinlin <lijinlin3@huawei.com> Acked-by:
-
Yanfei Xu authored
BUG: memory leak unreferenced object 0xffff888129acdb80 (size 96): comm "syz-executor.1", pid 12661, jiffies 4294962682 (age 15.220s) hex dump (first 32 bytes): 20 47 c9 85 ff ff ff ff 20 d4 8e 29 81 88 ff ff G...... ..).... 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff82264ec8>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff82264ec8>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff82264ec8>] blk_iolatency_init+0x28/0x190 block/blk-iolatency.c:724 [<ffffffff8225b8c4>] blkcg_init_queue+0xb4/0x1c0 block/blk-cgroup.c:1185 [<ffffffff822253da>] blk_alloc_queue+0x22a/0x2e0 block/blk-core.c:566 [<ffffffff8223b175>] blk_mq_init_queue_data block/blk-mq.c:3100 [inline] [<ffffffff8223b175>] __blk_mq_alloc_disk+0x25/0xd0 block/blk-mq.c:3124 [<ffffffff826a9303>] loop_add+0x1c3/0x360 drivers/block/loop.c:2344 [<ffffffff826a966e>] loop_control_get_free drivers/block/loop.c:2501 [inline] [<ffffffff826a966e>] loop_control_ioctl+0x17e/0x2e0 drivers/block/loop.c:2516 [<ffffffff81597eec>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff81597eec>] __do_sys_ioctl fs/ioctl.c:874 [inline] [<ffffffff81597eec>] __se_sys_ioctl fs/ioctl.c:860 [inline] [<ffffffff81597eec>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860 [<ffffffff843fa745>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff843fa745>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae Once blk_throtl_init() queue init failed, blkcg_iolatency_exit() will not be invoked for cleanup. That leads a memory leak. Swap the blk_throtl_init() and blk_iolatency_init() calls can solve this. Reported-by: syzbot+01321b15cc98e6bf96d6@syzkaller.appspotmail.com Fixes: 19688d7f (block/blk-cgroup: Swap the blk_throtl_init() and blk_iolatency_init() calls) Signed-off-by:Yanfei Xu <yanfei.xu@windriver.com> Acked-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.15 - fix ANA state updates when a namespace is not present (Anton Eidelman) - nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show (Dan Carpenter) - avoid race in shutdown namespace removal (Daniel Wagner) - fix io_work priority inversion in nvme-tcp (Keith Busch) - destroy cm id before destroy qp to avoid use after free (Ruozhu Li)" * tag 'nvme-5.15-2021-09-15' of git://git.infradead.org/nvme: nvme-tcp: fix io_work priority inversion nvme-rdma: destroy cm id before destroy qp to avoid use after free nvme-multipath: fix ANA state updates when a namespace is not present nvme: avoid race in shutdown namespace removal nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show()
-
Christoph Hellwig authored
There is no need to explicitly unregister the integrity profile when deleting the gendisk. Signed-off-by:
-
Lihong Kou authored
When the integrity profile is unregistered there can still be integrity reads queued up which could see a NULL verify_fn as shown by the race window below: CPU0 CPU1 process_one_work nvme_validate_ns bio_integrity_verify_fn nvme_update_ns_info nvme_update_disk_info blk_integrity_unregister ---set queue->integrity as 0 bio_integrity_process --access bi->profile->verify_fn(bi is a pointer of queue->integity) Before calling blk_integrity_unregister in nvme_update_disk_info, we must make sure that there is no work item in the kintegrityd_wq. Just call blk_flush_integrity to flush the work queue so the bug can be resolved. Signed-off-by:Lihong Kou <koulihong@huawei.com> [hch: split up and shortened the changelog] Signed-off-by:
-
Christoph Hellwig authored
While clearing the profile itself is harmless, we really should not clear the stable writes flag if it wasn't set due to a registered integrity profile. Reported-by:
-
- 14 Sep, 2021 3 commits
-
-
Keith Busch authored
Dispatching requests inline with the .queue_rq() call may block while holding the send_mutex. If the tcp io_work also happens to schedule, it may see the req_list is non-empty, leaving "pending" true and remaining in TASK_RUNNING. Since io_work is of higher scheduling priority, the .queue_rq task may not get a chance to run, blocking forward progress and leading to io timeouts. Instead of checking for pending requests within io_work, let the queueing restart io_work outside the send_mutex lock if there is more work to be done. Fixes: a0fdd141 ("nvme-tcp: rerun io_work if req_list is not empty") Reported-by:
Samuel Jones <sjones@kalrayinc.com> Signed-off-by:
-
Ruozhu Li authored
We should always destroy cm_id before destroy qp to avoid to get cma event after qp was destroyed, which may lead to use after free. In RDMA connection establishment error flow, don't destroy qp in cm event handler.Just report cm_error to upper level, qp will be destroy in nvme_rdma_alloc_queue() after destroy cm id. Signed-off-by:
Ruozhu Li <liruozhu@huawei.com> Reviewed-by:
Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by:
-
Anton Eidelman authored
nvme_update_ana_state() has a deficiency that results in a failure to properly update the ana state for a namespace in the following case: NSIDs in ctrl->namespaces: 1, 3, 4 NSIDs in desc->nsids: 1, 2, 3, 4 Loop iteration 0: ns index = 0, n = 0, ns->head->ns_id = 1, nsid = 1, MATCH. Loop iteration 1: ns index = 1, n = 1, ns->head->ns_id = 3, nsid = 2, NO MATCH. Loop iteration 2: ns index = 2, n = 2, ns->head->ns_id = 4, nsid = 4, MATCH. Where the update to the ANA state of NSID 3 is missed. To fix this increment n and retry the update with the same ns when ns->head->ns_id is higher than nsid, Signed-off-by:Anton Eidelman <anton@lightbitslabs.com> Signed-off-by:
-
- 13 Sep, 2021 3 commits
-
-
Daniel Wagner authored
When we remove the siblings entry, we update ns->head->list, hence we can't separate the removal and test for being empty. They have to be in the same critical section to avoid a race. To avoid breaking the refcounting imbalance again, add a list empty check to nvme_find_ns_head. Fixes: 5396fdac ("nvme: fix refcounting imbalance when all paths are down") Signed-off-by:
-
Dan Carpenter authored
This was intended to limit the number of characters printed from "subsys->serial" to NVMET_SN_MAX_SIZE. But accidentally the width specifier was used instead of the precision specifier so it only affects the alignment and not the number of characters printed. Fixes: f0406481 ("nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()") Signed-off-by:
-
Ming Lei authored
blk-mq can't run allocating driver tag and updating ->rqs[tag] atomically, meantime blk-mq doesn't clear ->rqs[tag] after the driver tag is released. So there is chance to iterating over one stale request just after the tag is allocated and before updating ->rqs[tag]. scsi_host_busy_iter() calls scsi_host_check_in_flight() to count scsi in-flight requests after scsi host is blocked, so no new scsi command can be marked as SCMD_STATE_INFLIGHT. However, driver tag allocation still can be run by blk-mq core. One request is marked as SCMD_STATE_INFLIGHT, but this request may have been kept in another slot of ->rqs[], meantime the slot can be allocated out but ->rqs[] isn't updated yet. Then this in-flight request is counted twice as SCMD_STATE_INFLIGHT. This way causes trouble in handling scsi error. Fixes the issue by not iterating over stale request. Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Reported-by:
luojiaxing <luojiaxing@huawei.com> Signed-off-by:
-
- 12 Sep, 2021 1 commit
-
-
Linus Torvalds authored
-
