Skip to content

L
linux
Switch branch/tag
  1. 14 Apr, 2023 2 commits
  3. 07 Apr, 2023 1 commit
    • Yu Kuai's avatar
      block: don't set GD_NEED_PART_SCAN if scan partition failed · 3723091e
      Yu Kuai authored 
      Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still
set, and partition scan will be proceed again when blkdev_get_by_dev()
is called. However, this will cause a problem that re-assemble partitioned
raid device will creat partition for underlying disk.

Test procedure:

mdadm -CR /dev/md0 -l 1 -n 2 /dev/sda /dev/sdb -e 1.0
sgdisk -n 0:0:+100MiB /dev/md0
blockdev --rereadpt /dev/sda
blockdev --rereadpt /dev/sdb
mdadm -S /dev/md0
mdadm -A /dev/md0 /dev/sda /dev/sdb

Test result: underlying disk partition and raid partition can be
observed at the same time

Note that this can still happen in come corner cases that
GD_NEED_PART_SCAN can be set for underlying disk while re-assemble raid
device.

Fixes: e5cfefa9 ("block: fix scan partition for exclusively open device again")
Reviewed-by: default avatarJan Kara <jack@suse.cz>
Reviewed-by: default avatarMing Lei <ming.lei@redhat.com>
Signed-off-by: default avatarYu Kuai <yukuai3@huawei.com>
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      3723091e
  5. 06 Apr, 2023 3 commits
  7. 05 Apr, 2023 1 commit
  9. 04 Apr, 2023 1 commit
  11. 31 Mar, 2023 1 commit
  13. 30 Mar, 2023 2 commits
    • Jens Axboe's avatar
      Merge tag 'nvme-6.3-2023-03-31' of git://git.infradead.org/nvme into block-6.3 · 1a06ed2d
      Jens Axboe authored 
      Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.3

 - mark Lexar NM760 as IGNORE_DEV_SUBNQN (Juraj Pecigos)
 - fix a possible UAF when failing to allocate an TCP io queue
   (Sagi Grimberg)"

* tag 'nvme-6.3-2023-03-31' of git://git.infradead.org/nvme:
  nvme-tcp: fix a possible UAF when failing to allocate an io queue
  nvme-pci: mark Lexar NM760 as IGNORE_DEV_SUBNQN
      1a06ed2d
    • Sagi Grimberg's avatar
      nvme-tcp: fix a possible UAF when failing to allocate an io queue · 88eaba80
      Sagi Grimberg authored 
      When we allocate a nvme-tcp queue, we set the data_ready callback before
we actually need to use it. This creates the potential that if a stray
controller sends us data on the socket before we connect, we can trigger
the io_work and start consuming the socket.

In this case reported: we failed to allocate one of the io queues, and
as we start releasing the queues that we already allocated, we get
a UAF [1] from the io_work which is running before it should really.

Fix this by setting the socket ops callbacks only before we start the
queue, so that we can't accidentally schedule the io_work in the
initialization phase before the queue started. While we are at it,
rename nvme_tcp_restore_sock_calls to pair with nvme_tcp_setup_sock_ops.

[1]:
[16802.107284] nvme nvme4: starting error recovery
[16802.109166] nvme nvme4: Reconnecting in 10 seconds...
[16812.173535] nvme nvme4: failed to connect socket: -111
[16812.173745] nvme nvme4: Failed reconnect attempt 1
[16812.173747] nvme nvme4: Reconnecting in 10 seconds...
[16822.413555] nvme nvme4: failed to connect socket: -111
[16822.413762] nvme nvme4: Failed reconnect attempt 2
[16822.413765] nvme nvme4: Reconnecting in 10 seconds...
[16832.661274] nvme nvme4: creating 32 I/O queues.
[16833.919887] BUG: kernel NULL pointer dereference, address: 0000000000000088
[16833.920068] nvme nvme4: Failed reconnect attempt 3
[16833.920094] #PF: supervisor write access in kernel mode
[16833.920261] nvme nvme4: Reconnecting in 10 seconds...
[16833.920368] #PF: error_code(0x0002) - not-present page
[16833.921086] Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp]
[16833.921191] RIP: 0010:_raw_spin_lock_bh+0x17/0x30
...
[16833.923138] Call Trace:
[16833.923271]  <TASK>
[16833.923402]  lock_sock_nested+0x1e/0x50
[16833.923545]  nvme_tcp_try_recv+0x40/0xa0 [nvme_tcp]
[16833.923685]  nvme_tcp_io_work+0x68/0xa0 [nvme_tcp]
[16833.923824]  process_one_work+0x1e8/0x390
[16833.923969]  worker_thread+0x53/0x3d0
[16833.924104]  ? process_one_work+0x390/0x390
[16833.924240]  kthread+0x124/0x150
[16833.924376]  ? set_kthread_struct+0x50/0x50
[16833.924518]  ret_from_fork+0x1f/0x30
[16833.924655]  </TASK>
Reported-by: default avatarYanjun Zhang <zhangyanjun@cestc.cn>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
Tested-by: default avatarYanjun Zhang <zhangyanjun@cestc.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      88eaba80
  15. 29 Mar, 2023 1 commit
    • Yu Kuai's avatar
      md: fix regression for null-ptr-deference in __md_stop() · 433279be
      Yu Kuai authored 
      Commit 3e453522 ("md: Free resources in __md_stop") tried to fix
null-ptr-deference for 'active_io' by moving percpu_ref_exit() to
__md_stop(), however, the commit also moving 'writes_pending' to
__md_stop(), and this will cause mdadm tests broken:

BUG: kernel NULL pointer dereference, address: 0000000000000038
Oops: 0000 [#1] PREEMPT SMP
CPU: 15 PID: 17830 Comm: mdadm Not tainted 6.3.0-rc3-next-20230324-00009-g520d37
RIP: 0010:free_percpu+0x465/0x670
Call Trace:
 <TASK>
 __percpu_ref_exit+0x48/0x70
 percpu_ref_exit+0x1a/0x90
 __md_stop+0xe9/0x170
 do_md_stop+0x1e1/0x7b0
 md_ioctl+0x90c/0x1aa0
 blkdev_ioctl+0x19b/0x400
 vfs_ioctl+0x20/0x50
 __x64_sys_ioctl+0xba/0xe0
 do_syscall_64+0x6c/0xe0
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

And the problem can be reporduced 100% by following test:

mdadm -CR /dev/md0 -l1 -n1 /dev/sda --force
echo inactive > /sys/block/md0/md/array_state
echo read-auto  > /sys/block/md0/md/array_state
echo inactive > /sys/block/md0/md/array_state

Root cause:

// start raid
raid1_run
 mddev_init_writes_pending
  percpu_ref_init

// inactive raid
array_state_store
 do_md_stop
  __md_stop
   percpu_ref_exit

// start raid again
array_state_store
 do_md_run
  raid1_run
   mddev_init_writes_pending
    if (mddev->writes_pending.percpu_count_ptr)
    // won't reinit

// inactive raid again
...
percpu_ref_exit
-> null-ptr-deference

Before the commit, 'writes_pending' is exited when mddev is freed, and
it's safe to restart raid because mddev_init_writes_pending() already make
sure that 'writes_pending' will only be initialized once.

Fix the prblem by moving 'writes_pending' back, it's a litter hard to find
the relationship between alloc memory and free memory, however, code
changes is much less and we lived with this for a long time already.

Fixes: 3e453522 ("md: Free resources in __md_stop")
Signed-off-by: default avatarYu Kuai <yukuai3@huawei.com>
Reviewed-by: default avatarXiao Ni <xni@redhat.com>
Signed-off-by: default avatarSong Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230328094400.1448955-1-yukuai1@huaweicloud.com
      433279be
  17. 28 Mar, 2023 1 commit
    • Juraj Pecigos's avatar
      nvme-pci: mark Lexar NM760 as IGNORE_DEV_SUBNQN · 1231363a
      Juraj Pecigos authored 
      A system with more than one of these SSDs will only have one usable.
The kernel fails to detect more than one nvme device due to duplicate
cntlids.

before:
[    9.395229] nvme 0000:01:00.0: platform quirk: setting simple suspend
[    9.395262] nvme nvme0: pci function 0000:01:00.0
[    9.395282] nvme 0000:03:00.0: platform quirk: setting simple suspend
[    9.395305] nvme nvme1: pci function 0000:03:00.0
[    9.409873] nvme nvme0: Duplicate cntlid 1 with nvme1, subsys nqn.2022-07.com.siliconmotion:nvm-subsystem-sn-                    , rejecting
[    9.409982] nvme nvme0: Removing after probe failure status: -22
[    9.427487] nvme nvme1: allocated 64 MiB host memory buffer.
[    9.445088] nvme nvme1: 16/0/0 default/read/poll queues
[    9.449898] nvme nvme1: Ignoring bogus Namespace Identifiers

after:
[    1.161890] nvme 0000:01:00.0: platform quirk: setting simple suspend
[    1.162660] nvme nvme0: pci function 0000:01:00.0
[    1.162684] nvme 0000:03:00.0: platform quirk: setting simple suspend
[    1.162707] nvme nvme1: pci function 0000:03:00.0
[    1.191354] nvme nvme0: allocated 64 MiB host memory buffer.
[    1.193378] nvme nvme1: allocated 64 MiB host memory buffer.
[    1.211044] nvme nvme1: 16/0/0 default/read/poll queues
[    1.211080] nvme nvme0: 16/0/0 default/read/poll queues
[    1.216145] nvme nvme0: Ignoring bogus Namespace Identifiers
[    1.216261] nvme nvme1: Ignoring bogus Namespace Identifiers

Adding the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk to resolves the issue.
Signed-off-by: default avatarJuraj Pecigos <kernel@juraj.dev>
Reviewed-by: default avatarChaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      1231363a
  19. 27 Mar, 2023 1 commit
    • Alyssa Ross's avatar
      loop: LOOP_CONFIGURE: send uevents for partitions · bb430b69
      Alyssa Ross authored 
      LOOP_CONFIGURE is, as far as I understand it, supposed to be a way to
combine LOOP_SET_FD and LOOP_SET_STATUS64 into a single syscall.  When
using LOOP_SET_FD+LOOP_SET_STATUS64, a single uevent would be sent for
each partition found on the loop device after the second ioctl(), but
when using LOOP_CONFIGURE, no such uevent was being sent.

In the old setup, uevents are disabled for LOOP_SET_FD, but not for
LOOP_SET_STATUS64.  This makes sense, as it prevents uevents being
sent for a partially configured device during LOOP_SET_FD - they're
only sent at the end of LOOP_SET_STATUS64.  But for LOOP_CONFIGURE,
uevents were disabled for the entire operation, so that final
notification was never issued.  To fix this, reduce the critical
section to exclude the loop_reread_partitions() call, which causes
the uevents to be issued, to after uevents are re-enabled, matching
the behaviour of the LOOP_SET_FD+LOOP_SET_STATUS64 combination.

I noticed this because Busybox's losetup program recently changed from
using LOOP_SET_FD+LOOP_SET_STATUS64 to LOOP_CONFIGURE, and this broke
my setup, for which I want a notification from the kernel any time a
new partition becomes available.
Signed-off-by: default avatarAlyssa Ross <hi@alyssa.is>
[hch: reduced the critical section]
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Fixes: 3448914e ("loop: Add LOOP_CONFIGURE ioctl")
Link: https://lore.kernel.org/r/20230320125430.55367-1-hch@lst.deSigned-off-by: default avatarJens Axboe <axboe@kernel.dk>
      bb430b69
  21. 23 Mar, 2023 1 commit
  23. 22 Mar, 2023 2 commits
  25. 21 Mar, 2023 1 commit
  27. 18 Mar, 2023 1 commit
  29. 16 Mar, 2023 2 commits
    • Lukas Bulwahn's avatar
      block: remove obsolete config BLOCK_COMPAT · 8f0d196e
      Lukas Bulwahn authored 
      Before commit bdc1ddad ("compat_ioctl: block: move
blkdev_compat_ioctl() into ioctl.c"), the config BLOCK_COMPAT was used to
include compat_ioctl.c into the kernel build. With this commit, the code
is moved into ioctl.c and included with the config COMPAT. So, since then,
the config BLOCK_COMPAT has no effect and any further purpose.

Remove this obsolete config BLOCK_COMPAT.
Signed-off-by: default avatarLukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230316111630.4897-1-lukas.bulwahn@gmail.comSigned-off-by: default avatarJens Axboe <axboe@kernel.dk>
      8f0d196e
    • Jens Axboe's avatar
      Merge tag 'nvme-6.3-2022-03-16' of git://git.infradead.org/nvme into block-6.3 · 890a2fb0
      Jens Axboe authored 
      Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.3

 - avoid potential UAF in nvmet_req_complete (Damien Le Moal)
 - more quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen)
 - fix a memory leak in the nvme-pci probe teardown path (Irvin Cote)
 - repair the MAINTAINERS entry (Lukas Bulwahn)
 - fix handling single range discard request (Ming Lei)
 - show more opcode names in trace events (Minwoo Im)
 - fix nvme-tcp timeout reporting (Sagi Grimberg)"

* tag 'nvme-6.3-2022-03-16' of git://git.infradead.org/nvme:
  nvmet: avoid potential UAF in nvmet_req_complete()
  nvme-trace: show more opcode names
  nvme-tcp: add nvme-tcp pdu size build protection
  nvme-tcp: fix opcode reporting in the timeout handler
  nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620
  nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000
  nvme-pci: fixing memory leak in probe teardown path
  nvme: fix handling single range discard request
  MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS
      890a2fb0
  31. 15 Mar, 2023 17 commits
  33. 14 Mar, 2023 1 commit
    • Jan Kara's avatar
      block: do not reverse request order when flushing plug list · 34e0a279
      Jan Kara authored 
      Commit 26fed4ac ("block: flush plug based on hardware and software
queue order") changed flushing of plug list to submit requests one
device at a time. However while doing that it also started using
list_add_tail() instead of list_add() used previously thus effectively
submitting requests in reverse order. Also when forming a rq_list with
remaining requests (in case two or more devices are used), we
effectively reverse the ordering of the plug list for each device we
process. Submitting requests in reverse order has negative impact on
performance for rotational disks (when BFQ is not in use). We observe
10-25% regression in random 4k write throughput, as well as ~20%
regression in MariaDB OLTP benchmark on rotational storage on btrfs
filesystem.

Fix the problem by preserving ordering of the plug list when inserting
requests into the queuelist as well as by appending to requeue_list
instead of prepending to it.

Fixes: 26fed4ac ("block: flush plug based on hardware and software queue order")
Signed-off-by: default avatarJan Kara <jack@suse.cz>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230313093002.11756-1-jack@suse.czSigned-off-by: default avatarJens Axboe <axboe@kernel.dk>
      34e0a279
  35. 13 Mar, 2023 1 commit
    • NeilBrown's avatar
      md: avoid signed overflow in slot_store() · 3bc57292
      NeilBrown authored 
      slot_store() uses kstrtouint() to get a slot number, but stores the
result in an "int" variable (by casting a pointer).
This can result in a negative slot number if the unsigned int value is
very large.

A negative number means that the slot is empty, but setting a negative
slot number this way will not remove the device from the array.  I don't
think this is a serious problem, but it could cause confusion and it is
best to fix it.
Reported-by: default avatarDan Carpenter <error27@gmail.com>
Signed-off-by: default avatarNeilBrown <neilb@suse.de>
Signed-off-by: default avatarSong Liu <song@kernel.org>
      3bc57292
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7