- 03 Feb, 2022 2 commits
-
-
Rafael J. Wysocki authored
Replace acpi_bus_get_device() that is going to be dropped with acpi_fetch_acpi_dev(). No intentional functional impact. Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/2631712.mvXUDI8C0e@kreacherReviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
The ThinkPad T15g Gen 2 has 2 fan, add a TPACPI_FAN_2CTL quirk entry for it to the fan_quirk_table[] so that both fans can be controllerd. Reported-and-tested-by:
David Dreschner <david@dreschner.net> Signed-off-by:
-
- 02 Feb, 2022 6 commits
-
-
Hans de Goede authored
This branch contains 5.17-rc1 + the SPI tree's spi-acpi-helpers tag + the other patches from the "[PATCH v6 0/9] Support Spi in i2c-multi-instantiate driver" series.
-
Lucas Tanure authored
The ACPI device with CSC3551 or CLSA0100 are sound cards with multiple instances of CS35L41 connected by I2C or SPI to the main CPU. We add an ID to the ignore_serial_bus_ids list to enumerate all I2C or SPI devices correctly. The same IDs are also added into serial-multi-instantiate so that the driver can correctly enumerate the ACPI. Signed-off-by:
Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220121172431.6876-10-sbinding@opensource.cirrus.comReviewed-by:
-
Lucas Tanure authored
Add support for two and four CS35L41 using the component binding method Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20220121172431.6876-9-sbinding@opensource.cirrus.comSigned-off-by:
-
Stefan Binding authored
Add support for spi bus in serial-multi-instantiate driver Some peripherals can have either a I2C or a SPI connection to the host (but not both) but use the same HID for both types. So it is not possible to use the HID to determine whether it is I2C or SPI. The driver must check the node to see if it contains I2cSerialBus or SpiSerialBus entries. For backwards-compatibility with the existing nodes I2C is checked first and if such entries are found ONLY I2C devices are created. Since some existing nodes that were already handled by this driver could also contain unrelated SpiSerialBus nodes that were previously ignored, and this preserves that behavior. If there is ever a need to handle a node where both I2C and SPI devices must be instantiated this can be added in future. Signed-off-by:
-
Lucas Tanure authored
Reorganize I2C functions to accommodate SPI support Split the probe and factor out parts of the code that will be used in the SPI support Also switched from strlcpy() to strscpy() Signed-off-by:
-
Lucas Tanure authored
Rename I2C multi instantiate driver to serial-multi-instantiate for upcoming addition of SPI support Signed-off-by:
-
- 01 Feb, 2022 5 commits
-
-
Stefan Binding authored
Some ACPI nodes may have more than one Spi Resource. To be able to handle these case, its necessary to have a way of counting these resources. Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Stefan Binding authored
If a node contains more than one SPI resource it may be necessary to use an index to select which one you want to allocate a spi device for. Signed-off-by:
-
Stefan Binding authored
This can then be used to find a spi resource inside an ACPI node, and allocate a spi device. Signed-off-by:
-
Stefan Binding authored
This functions were previously made private since they were not used. However, these functions will be needed again. Partial revert of commit da21fde0 ("spi: Make several public functions private to spi.c") Signed-off-by:
-
Mark Pearson authored
Lenovo AMD based platforms have been offering platform_profiles but they are not working correctly. This is because the mode we are using on the Intel platforms (MMC) is not available on the AMD platforms. This commit adds checking of the functional capabilities returned by the BIOS to confirm if MMC is supported or not. Profiles will not be available if the platform is not MMC capable. I'm investigating and working on an alternative for AMD platforms but that is still work-in-progress. Signed-off-by:
Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20220127190358.4078-1-markpearson@lenovo.comReviewed-by:
-
- 24 Jan, 2022 14 commits
-
-
Mario Limonciello authored
Yellow carp has been outputting versions like `1093.24.0`, but this is supposed to be 69.24.0. That is the MSB is being interpreted incorrectly. The MSB is not part of the major version, but has generally been treated that way thus far. It's actually the program, and used to distinguish between two programs from a similar family but different codebase. Link: https://patchwork.freedesktop.org/patch/469993/Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20220120174439.12770-1-mario.limonciello@amd.comReviewed-by:
-
Hans de Goede authored
tf103c_dock_hid_ll_driver and tf103c_dock_pm_ops are not used outside of the driver, make them both static. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Hans de Goede authored
amd_pmc_stb_debugfs_fops is not used outside of amd-pmc.c, make it static. Cc: Sanket Goswami <Sanket.Goswami@amd.com> Reported-by:
-
Srinivas Pandruvada authored
As reported: [ 256.104522] ====================================================== [ 256.113783] WARNING: possible circular locking dependency detected [ 256.120093] 5.16.0-rc6-yocto-standard+ #99 Not tainted [ 256.125362] ------------------------------------------------------ [ 256.131673] intel-speed-sel/844 is trying to acquire lock: [ 256.137290] ffffffffc036f0d0 (punit_misc_dev_lock){+.+.}-{3:3}, at: isst_if_open+0x18/0x90 [isst_if_common] [ 256.147171] [ 256.147171] but task is already holding lock: [ 256.153135] ffffffff8ee7cb50 (misc_mtx){+.+.}-{3:3}, at: misc_open+0x2a/0x170 [ 256.160407] [ 256.160407] which lock already depends on the new lock. [ 256.160407] [ 256.168712] [ 256.168712] the existing dependency chain (in reverse order) is: [ 256.176327] [ 256.176327] -> #1 (misc_mtx){+.+.}-{3:3}: [ 256.181946] lock_acquire+0x1e6/0x330 [ 256.186265] __mutex_lock+0x9b/0x9b0 [ 256.190497] mutex_lock_nested+0x1b/0x20 [ 256.195075] misc_register+0x32/0x1a0 [ 256.199390] isst_if_cdev_register+0x65/0x180 [isst_if_common] [ 256.205878] isst_if_probe+0x144/0x16e [isst_if_mmio] ... [ 256.241976] [ 256.241976] -> #0 (punit_misc_dev_lock){+.+.}-{3:3}: [ 256.248552] validate_chain+0xbc6/0x1750 [ 256.253131] __lock_acquire+0x88c/0xc10 [ 256.257618] lock_acquire+0x1e6/0x330 [ 256.261933] __mutex_lock+0x9b/0x9b0 [ 256.266165] mutex_lock_nested+0x1b/0x20 [ 256.270739] isst_if_open+0x18/0x90 [isst_if_common] [ 256.276356] misc_open+0x100/0x170 [ 256.280409] chrdev_open+0xa5/0x1e0 ... The call sequence suggested that misc_device /dev file can be opened before misc device is yet to be registered, which is done only once. Here punit_misc_dev_lock was used as common lock, to protect the registration by multiple ISST HW drivers, one time setup, prevent duplicate registry of misc device and prevent load/unload when device is open. We can split into locks: - One which just prevent duplicate call to misc_register() and one time setup. Also never call again if the misc_register() failed or required one time setup is failed. This lock is not shared with any misc device callbacks. - The other lock protects registry, load and unload of HW drivers. Sequence in isst_if_cdev_register() - Register callbacks under punit_misc_dev_open_lock - Call isst_misc_reg() which registers misc_device on the first registry which is under punit_misc_dev_reg_lock, which is not shared with callbacks. Sequence in isst_if_cdev_unregister Just opposite of isst_if_cdev_register Reported-and-tested-by:Liwei Song <liwei.song@windriver.com> Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20220112022521.54669-1-srinivas.pandruvada@linux.intel.comReviewed-by:
-
Hans de Goede authored
The driver as originally submitted accidentally relied on Android having run before and Android having unmasked the 2nd level IRQ-mask for the charger IRQ. This worked since these are PMIC registers which are only reset when the battery is fully drained or disconnected. Fix the charger IRQ no longer working after loss of battery power by properly setting the 2nd level IRQ-mask for the charger IRQ. Note this removes the need to enable/disable our parent IRQ which just sets the mask bit in the 1st level IRQ-mask register, setting one of the 2 level masks is enough to stop the IRQ from getting reported. Fixes: 761db353 ("platform/x86: Add intel_crystal_cove_charger driver") Signed-off-by:
-
Alexander Kobel authored
Some ThinkPad models, like the X1 Tablet 1st and 2nd Gen, are passively cooled without any fan. Currently, an entry in /proc/acpi/ibm/fan is nevertheless created, and misleadingly shows status: enabled speed: 65535 level: auto This patch adds a TPACPI_FAN_NOFAN quirk definition and corresponding handling to not initialize a fan interface at all. For the time being, the quirk is only applied for X1 Tablet 2nd Gen (types 20JB, 20JC; EC N1O...); further models (such as Gen1, types 20GG and 20GH) can be added easily once tested. Tested on a 20JCS00C00, BIOS N1OET58W (1.43), EC N1OHT34W. Signed-off-by:
Alexander Kobel <a-kobel@a-kobel.de> Link: https://lore.kernel.org/r/12d4b825-a2b9-8cb7-6ed3-db4d66f46a60@a-kobel.deReviewed-by:
-
Yuka Kawajiri authored
Add touchscreen info for RWC NANOTE P8 (AY07J) 2-in-1. Signed-off-by:
Yuka Kawajiri <yukx00@gmail.com> Link: https://lore.kernel.org/r/20220111154019.4599-1-yukx00@gmail.comReviewed-by:
-
Geert Uytterhoeven authored
Microsoft Surface platform-specific devices are only present on Microsoft Surface platforms, which are currently limited to arm64 and x86. Hence add a dependency on ARM64 || X86, to prevent asking the user about drivers for these devices when configuring a kernel for an architecture that does not support Microsoft Surface platforms. Fixes: 27247992 ("platform: surface: Propagate ACPI Dependency") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20220115140849.269479-1-geert@linux-m68k.orgSigned-off-by:
-
Lubomir Rintel authored
Bring balance to the quoting of Hans' e-mail address. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20220110063629.273364-1-lkundrak@v3.skSigned-off-by:
-
Lubomir Rintel authored
This switches the P10T tablet to "Android" mode, where the Home button sends a single sancode instead of a Windows-specific key combination and the other button doesn't disable the Wi-Fi. Signed-off-by:
-
Hans de Goede authored
The individual gpiod_lookup_table structs cannot be const because they contain a list-head which gets used when registering them. But the array of pointers to the gpiod_lookup_table-s used by a board can be const, constify these. Signed-off-by:
-
Hans de Goede authored
Add an init() callback to struct x86_dev_info, board descriptions can use this to do some custom setup before registering the i2c_clients, platform- devices and servdevs. Also add an exit() callback to also allow for cleanup of the custom setup. Signed-off-by:
-
Hans de Goede authored
Some of the broken DSDTs on these devices often also include broken / wrong _AEI (ACPI Event Interrupt) handlers, which can cause e.g. interrupt storms by listening to a floating GPIO pin. Add support for disabling these and disable them on the Asus ME176C and TF103C tablets. Signed-off-by:
-
Hans de Goede authored
The module was renamed to intel_crystal_cove_charger before it was merged, updated bq24190_modules to match. Signed-off-by:
-
- 23 Jan, 2022 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Fix printing 'phys_addr' in 'perf script'. - Fix failure to add events with 'perf probe' in ppc64 due to not removing leading dot (ppc64 ABIv1). - Fix cpu_map__item() python binding building. - Support event alias in form foo-bar-baz, add pmu-events and parse-event tests for it. - No need to setup affinities when starting a workload or attaching to a pid. - Use path__join() to compose a path instead of ad-hoc snprintf() equivalent. - Override attr->sample_period for non-libpfm4 events. - Use libperf cpumap APIs instead of accessing the internal state directly. - Sync x86 arch prctl headers and files changed by the new set_mempolicy_home_node syscall with the kernel sources. - Remove duplicate include in cpumap.h. - Remove redundant err variable. * tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Remove redundant err variable perf test: Add parse-events test for aliases with hyphens perf test: Add pmu-events test for aliases with hyphens perf parse-events: Support event alias in form foo-bar-baz perf evsel: Override attr->sample_period for non-libpfm4 events perf cpumap: Remove duplicate include in cpumap.h perf cpumap: Migrate to libperf cpumap api perf python: Fix cpu_map__item() building perf script: Fix printing 'phys_addr' failure issue tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall tools headers UAPI: Sync x86 arch prctl headers with the kernel sources perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename) perf evlist: No need to setup affinities when disabling events for pid targets perf evlist: No need to setup affinities when enabling events for pid targets perf stat: No need to setup affinities when starting a workload perf affinity: Allow passing a NULL arg to affinity__cleanup() perf probe: Fix ppc64 'perf probe add events failed' case
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull ftrace fix from Steven Rostedt: "Fix s390 breakage from sorting mcount tables. The latest merge of the tracing tree sorts the mcount table at build time. But s390 appears to do things differently (like always) and replaces the sorted table back to the original unsorted one. As the ftrace algorithm depends on it being sorted, bad things happen when it is not, and s390 experienced those bad things. Add a new config to tell the boot if the mcount table is sorted or not, and allow s390 to opt out of it" * tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix assuming build time sort works for s390
-
Steven Rostedt (Google) authored
To speed up the boot process, as mcount_loc needs to be sorted for ftrace to work properly, sorting it at build time is more efficient than boot up and can save milliseconds of time. Unfortunately, this change broke s390 as it will modify the mcount_loc location after the sorting takes place and will put back the unsorted locations. Since the sorting is skipped at boot up if it is believed that it was sorted at run time, ftrace can crash as its algorithms are dependent on the list being sorted. Add a new config BUILDTIME_MCOUNT_SORT that is set when BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine if sorting should take place at boot up. Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/ Fixes: 72b3942a ("scripts: ftrace - move the sort-processing in ftrace_init") Reported-by:
Sven Schnelle <svens@linux.ibm.com> Tested-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage - Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH - Fix build errors in certs/Makefile * tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH" usr/include/Makefile: add linux/nfc.h to the compile-test coverage
-
git://github.com/norov/linuxLinus Torvalds authored
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
-
- 22 Jan, 2022 7 commits
-
-
Minghao Chi authored
Return value from perf_event__process_tracing_data() directly instead of taking this in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cnSigned-off-by:
CGEL ZTE <cgel.zte@gmail.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
Add a test which allows us to test parsing an event alias with hyphens. Since these events typically do not exist on most host systems, add the alias to the fake pmu. Function perf_pmu__test_parse_init() has terms added to match known test aliases. Signed-off-by:
John Garry <john.garry@huawei.com> Acked-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
Add a test for aliases with hyphens in the name to ensure that the pmu-events tables are as expects. There should be no reason why these sort of aliases would be treated differently, but no harm in checking. Signed-off-by:
-
John Garry authored
Event aliasing for events whose name in the form foo-bar-baz is not supported, while foo-bar, foo_bar_baz, and other combinations are, i.e. two hyphens are not supported. The HiSilicon D06 platform has events in such form: $ ./perf list sdir-home-migrate List of pre-defined events (to be used in -e): uncore hha: sdir-home-migrate [Unit: hisi_sccl,hha] $ sudo ./perf stat -e sdir-home-migrate event syntax error: 'sdir-home-migrate' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event>event selector. use 'perf list' to list available events To support, add an extra PMU event symbol type for "baz", and add a new rule in the bison file. Signed-off-by: -
German Gomez authored
A previous patch preventing "attr->sample_period" values from being overridden in pfm events changed a related behaviour in arm-spe. Before said patch: perf record -c 10000 -e arm_spe_0// -- sleep 1 Would yield an SPE event with period=10000. After the patch, the period in "-c 10000" was being ignored because the arm-spe code initializes sample_period to a non-zero value. This patch restores the previous behaviour for non-libpfm4 events. Fixes: ae5dcc8a (“perf record: Prevent override of attr->sample_period for libpfm4 events”) Reported-by:
Chase Conklin <chase.conklin@arm.com> Signed-off-by:
German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.comSigned-off-by:
-
Lv Ruyi authored
Remove all but the first include of stdbool.h from cpumap.h. Reported-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by:
-
Ian Rogers authored
Switch from directly accessing the perf_cpu_map to using the appropriate libperf API when possible. Using the API simplifies the job of refactoring use of perf_cpu_map. Signed-off-by:
-
