Pull device mapper updates from Mike Snitzer:

 - initially based on Jens' 'for-4.8/core' (given all the flag churn)
   and later merged with 'for-4.8/core' to pickup the QUEUE_FLAG_DAX
   commits that DM depends on to provide its DAX support

 - clean up the bio-based vs request-based DM core code by moving the
   request-based DM core code out to dm-rq.[hc]

 - reinstate bio-based support in the DM multipath target (done with the
   idea that fast storage like NVMe over Fabrics could benefit) -- while
   preserving support for request_fn and blk-mq request-based DM mpath

 - SCSI and DM multipath persistent reservation fixes that were
   coordinated with Martin Petersen.

 - the DM raid target saw the most extensive change this cycle; it now
   provides reshape and takeover support (by layering ontop of the
   corresponding MD capabilities)

 - DAX support for DM core and the linear, stripe and error targets

 - a DM thin-provisioning block discard vs allocation race fix that
   addresses potential for corruption

 - a stable fix for DM verity-fec's block calculation during decode

 - a few cleanups and fixes to DM core and various targets

* tag 'dm-4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (73 commits)
  dm: allow bio-based table to be upgraded to bio-based with DAX support
  dm snap: add fake origin_direct_access
  dm stripe: add DAX support
  dm error: add DAX support
  dm linear: add DAX support
  dm: add infrastructure for DAX support
  dm thin: fix a race condition between discarding and provisioning a block
  dm btree: fix a bug in dm_btree_find_next_single()
  dm raid: fix random optimal_io_size for raid0
  dm raid: address checkpatch.pl complaints
  dm: call PR reserve/unreserve on each underlying device
  sd: don't use the ALL_TG_PT bit for reservations
  dm: fix second blk_delay_queue() parameter to be in msec units not jiffies
  dm raid: change logical functions to actually return bool
  dm raid: use rdev_for_each in status
  dm raid: use rs->raid_disks to avoid memory leaks on free
  dm raid: support delta_disks for raid1, fix table output
  dm raid: enhance reshape check and factor out reshape setup
  dm raid: allow resize during recovery
  dm raid: fix rs_is_recovering() to allow for lvextend
  ...

Pull block driver updates from Jens Axboe:
 "This branch also contains core changes.  I've come to the conclusion
  that from 4.9 and forward, I'll be doing just a single branch.  We
  often have dependencies between core and drivers, and it's hard to
  always split them up appropriately without pulling core into drivers
  when that happens.

  That said, this contains:

   - separate secure erase type for the core block layer, from
     Christoph.

   - set of discard fixes, from Christoph.

   - bio shrinking fixes from Christoph, as a followup up to the
     op/flags change in the core branch.

   - map and append request fixes from Christoph.

   - NVMeF (NVMe over Fabrics) code from Christoph.  This is pretty
     exciting!

   - nvme-loop fixes from Arnd.

   - removal of ->driverfs_dev from Dan, after providing a
     device_add_disk() helper.

   - bcache fixes from Bhaktipriya and Yijing.

   - cdrom subchannel read fix from Vchannaiah.

   - set of lightnvm updates from Wenwei, Matias, Johannes, and Javier.

   - set of drbd updates and fixes from Fabian, Lars, and Philipp.

   - mg_disk error path fix from Bart.

   - user notification for failed device add for loop, from Minfei.

   - NVMe in general:
        + NVMe delay quirk from Guilherme.
        + SR-IOV support and command retry limits from Keith.
        + fix for memory-less NUMA node from Masayoshi.
        + use UINT_MAX for discard sectors, from Minfei.
        + cancel IO fixes from Ming.
        + don't allocate unused major, from Neil.
        + error code fixup from Dan.
        + use constants for PSDT/FUSE from James.
        + variable init fix from Jay.
        + fabrics fixes from Ming, Sagi, and Wei.
        + various fixes"

* 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits)
  nvme/pci: Provide SR-IOV support
  nvme: initialize variable before logical OR'ing it
  block: unexport various bio mapping helpers
  scsi/osd: open code blk_make_request
  target: stop using blk_make_request
  block: simplify and export blk_rq_append_bio
  block: ensure bios return from blk_get_request are properly initialized
  virtio_blk: use blk_rq_map_kern
  memstick: don't allow REQ_TYPE_BLOCK_PC requests
  block: shrink bio size again
  block: simplify and cleanup bvec pool handling
  block: get rid of bio_rw and READA
  block: don't ignore -EOPNOTSUPP blkdev_issue_write_same
  block: introduce BLKDEV_DISCARD_ZERO to fix zeroout
  NVMe: don't allocate unused nvme_major
  nvme: avoid crashes when node 0 is memoryless node.
  nvme: Limit command retries
  loop: Make user notify for adding loop device failed
  nvme-loop: fix nvme-loop Kconfig dependencies
  nvmet: fix return value check in nvmet_subsys_alloc()
  ...

Pull core block updates from Jens Axboe:

   - the big change is the cleanup from Mike Christie, cleaning up our
     uses of command types and modified flags.  This is what will throw
     some merge conflicts

   - regression fix for the above for btrfs, from Vincent

   - following up to the above, better packing of struct request from
     Christoph

   - a 2038 fix for blktrace from Arnd

   - a few trivial/spelling fixes from Bart Van Assche

   - a front merge check fix from Damien, which could cause issues on
     SMR drives

   - Atari partition fix from Gabriel

   - convert cfq to highres timers, since jiffies isn't granular enough
     for some devices these days.  From Jan and Jeff

   - CFQ priority boost fix idle classes, from me

   - cleanup series from Ming, improving our bio/bvec iteration

   - a direct issue fix for blk-mq from Omar

   - fix for plug merging not involving the IO scheduler, like we do for
     other types of merges.  From Tahsin

   - expose DAX type internally and through sysfs.  From Toshi and Yigal

* 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits)
  block: Fix front merge check
  block: do not merge requests without consulting with io scheduler
  block: Fix spelling in a source code comment
  block: expose QUEUE_FLAG_DAX in sysfs
  block: add QUEUE_FLAG_DAX for devices to advertise their DAX support
  Btrfs: fix comparison in __btrfs_map_block()
  block: atari: Return early for unsupported sector size
  Doc: block: Fix a typo in queue-sysfs.txt
  cfq-iosched: Charge at least 1 jiffie instead of 1 ns
  cfq-iosched: Fix regression in bonnie++ rewrite performance
  cfq-iosched: Convert slice_resid from u64 to s64
  block: Convert fifo_time from ulong to u64
  blktrace: avoid using timespec
  block/blk-cgroup.c: Declare local symbols static
  block/bio-integrity.c: Add #include "blk.h"
  block/partition-generic.c: Remove a set-but-not-used variable
  block: bio: kill BIO_MAX_SIZE
  cfq-iosched: temporarily boost queue priority for idle classes
  block: drbd: avoid to use BIO_MAX_SIZE
  block: bio: remove BIO_MAX_SECTORS
  ...

Pull libata updates from Tejun Heo:
 "libata saw quite a bit of activities in this cycle:

   - SMR drive support still being worked on

   - bug fixes and improvements to misc SCSI command emulation

   - some low level driver updates"

* 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (39 commits)
  libata-scsi: better style in ata_msense_*()
  AHCI: Clear GHC.IS to prevent unexpectly asserting INTx
  ata: sata_dwc_460ex: remove redundant dev_err call
  ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_*
  libata: remove ATA_PROT_FLAG_DATA
  libata: remove ata_is_nodata
  ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48}
  libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat
  libata-scsi: Fix ZBC management out command translation
  libata-scsi: Fix translation of REPORT ZONES command
  ata: Handle ATA NCQ NO-DATA commands correctly
  libata-eh: decode all taskfile protocols
  ata: fixup ATA_PROT_NODATA
  libsas: use ata_is_ncq() and ata_has_dma() accessors
  libata: use ata_is_ncq() accessors
  libata: return boolean values from ata_is_*
  libata-scsi: avoid repeated calculation of number of TRIM ranges
  libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit
  libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control()
  libata-scsi: fix D_SENSE bit relection in control mode page
  ...

Pull cgroup updates from Tejun Heo:
 "Nothing too exciting.

   - updates to the pids controller so that pid limit breaches can be
     noticed and monitored from userland.

   - cleanups and non-critical bug fixes"

* 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: remove duplicated include from cgroup.c
  cgroup: Use lld instead of ld when printing pids controller events_limit
  cgroup: Add pids controller event when fork fails because of pid limit
  cgroup: allow NULL return from ss->css_alloc()
  cgroup: remove unnecessary 0 check from css_from_id()
  cgroup: fix idr leak for the first cgroup root

Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 4.8:

  API:
   - first part of skcipher low-level conversions
   - add KPP (Key-agreement Protocol Primitives) interface.

  Algorithms:
   - fix IPsec/cryptd reordering issues that affects aesni
   - RSA no longer does explicit leading zero removal
   - add SHA3
   - add DH
   - add ECDH
   - improve DRBG performance by not doing CTR by hand

  Drivers:
   - add x86 AVX2 multibuffer SHA256/512
   - add POWER8 optimised crc32c
   - add xts support to vmx
   - add DH support to qat
   - add RSA support to caam
   - add Layerscape support to caam
   - add SEC1 AEAD support to talitos
   - improve performance by chaining requests in marvell/cesa
   - add support for Araneus Alea I USB RNG
   - add support for Broadcom BCM5301 RNG
   - add support for Amlogic Meson RNG
   - add support Broadcom NSP SoC RNG"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (180 commits)
  crypto: vmx - Fix aes_p8_xts_decrypt build failure
  crypto: vmx - Ignore generated files
  crypto: vmx - Adding support for XTS
  crypto: vmx - Adding asm subroutines for XTS
  crypto: skcipher - add comment for skcipher_alg->base
  crypto: testmgr - Print akcipher algorithm name
  crypto: marvell - Fix wrong flag used for GFP in mv_cesa_dma_add_iv_op
  crypto: nx - off by one bug in nx_of_update_msc()
  crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct
  crypto: scatterwalk - Inline start/map/done
  crypto: scatterwalk - Remove unnecessary BUG in scatterwalk_start
  crypto: scatterwalk - Remove unnecessary advance in scatterwalk_pagedone
  crypto: scatterwalk - Fix test in scatterwalk_done
  crypto: api - Optimise away crypto_yield when hard preemption is on
  crypto: scatterwalk - add no-copy support to copychunks
  crypto: scatterwalk - Remove scatterwalk_bytes_sglen
  crypto: omap - Stop using crypto scatterwalk_bytes_sglen
  crypto: skcipher - Remove top-level givcipher interface
  crypto: user - Remove crypto_lookup_skcipher call
  crypto: cts - Convert to skcipher
  ...

Pull documentation updates from Jonathan Corbet:
 "Some big changes this month, headlined by the addition of a new
  formatted documentation mechanism based on the Sphinx system.

  The objectives here are to make it easier to create better-integrated
  (and more attractive) documents while (eventually) dumping our
  one-of-a-kind, cobbled-together system for something that is widely
  used and maintained by others.  There's a fair amount of information
  what's being done, why, and how to use it in:

    https://lwn.net/Articles/692704/
    https://lwn.net/Articles/692705/

  Closer to home, Documentation/kernel-documentation.rst describes how
  it works.

  For now, the new system exists alongside the old one; you should soon
  see the GPU documentation converted over in the DRM pull and some
  significant media conversion work as well.  Once all the docs have
  been moved over and we're convinced that the rough edges (of which are
  are a few) have been smoothed over, the DocBook-based stuff should go
  away.

  Primary credit is to Jani Nikula for doing the heavy lifting to make
  this stuff actually work; there has also been notable effort from
  Markus Heiser, Daniel Vetter, and Mauro Carvalho Chehab.

  Expect a couple of conflicts on the new index.rst file over the course
  of the merge window; they are trivially resolvable.  That file may be
  a bit of a conflict magnet in the short term, but I don't expect that
  situation to last for any real length of time.

  Beyond that, of course, we have the usual collection of tweaks,
  updates, and typo fixes"

* tag 'docs-for-linus' of git://git.lwn.net/linux: (77 commits)
  doc-rst: kernel-doc: fix handling of address_space tags
  Revert "doc/sphinx: Enable keep_warnings"
  doc-rst: kernel-doc directive, fix state machine reporter
  docs: deprecate kernel-doc-nano-HOWTO.txt
  doc/sphinx: Enable keep_warnings
  Documentation: add watermark_scale_factor to the list of vm systcl file
  kernel-doc: Fix up warning output
  docs: Get rid of some kernel-documentation warnings
  doc-rst: add an option to ignore DocBooks when generating docs
  workqueue: Fix a typo in workqueue.txt
  Doc: ocfs: Fix typo in filesystems/ocfs2-online-filecheck.txt
  Documentation/sphinx: skip build if user requested specific DOCBOOKS
  Documentation: add cleanmediadocs to the documentation targets
  Add .pyc files to .gitignore
  Doc: PM: Fix a typo in intel_powerclamp.txt
  doc-rst: flat-table directive - initial implementation
  Documentation: add meta-documentation for Sphinx and kernel-doc
  Documentation: tiny typo fix in usb/gadget_multi.txt
  Documentation: fix wrong value in md.txt
  bcache: documentation formatting, edited for clarity, stripe alignment notes
  ...

Pull s390 updates from Martin Schwidefsky:
 "There are a couple of new things for s390 with this merge request:

   - a new scheduling domain "drawer" is added to reflect the unusual
     topology found on z13 machines.  Performance tests showed up to 8
     percent gain with the additional domain.

   - the new crc-32 checksum crypto module uses the vector-galois-field
     multiply and sum SIMD instruction to speed up crc-32 and crc-32c.

   - proper __ro_after_init support, this requires RO_AFTER_INIT_DATA in
     the generic vmlinux.lds linker script definitions.

   - kcov instrumentation support.  A prerequisite for that is the
     inline assembly basic block cleanup, which is the reason for the
     net/iucv/iucv.c change.

   - support for 2GB pages is added to the hugetlbfs backend.

  Then there are two removals:

   - the oprofile hardware sampling support is dead code and is removed.
     The oprofile user space uses the perf interface nowadays.

   - the ETR clock synchronization is removed, this has been superseeded
     be the STP clock synchronization.  And it always has been
     "interesting" code..

  And the usual bug fixes and cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (82 commits)
  s390/pci: Delete an unnecessary check before the function call "pci_dev_put"
  s390/smp: clean up a condition
  s390/cio/chp : Remove deprecated create_singlethread_workqueue
  s390/chsc: improve channel path descriptor determination
  s390/chsc: sanitize fmt check for chp_desc determination
  s390/cio: make fmt1 channel path descriptor optional
  s390/chsc: fix ioctl CHSC_INFO_CU command
  s390/cio/device_ops: fix kernel doc
  s390/cio: allow to reset channel measurement block
  s390/console: Make preferred console handling more consistent
  s390/mm: fix gmap tlb flush issues
  s390/mm: add support for 2GB hugepages
  s390: have unique symbol for __switch_to address
  s390/cpuinfo: show maximum thread id
  s390/ptrace: clarify bits in the per_struct
  s390: stack address vs thread_info
  s390: remove pointless load within __switch_to
  s390: enable kcov support
  s390/cpumf: use basic block for ecctr inline assembly
  s390/hypfs: use basic block for diag inline assembly
  ...

Pull KVM leftovers from Radim Krčmář:
 "This is a combination of two pull requests for 4.7-rc8 that were not
  merged due to looking hairy.  I have changed the tag message to focus
  on circumstances of contained reverts as they were likely the reason
  behind rejection.

  This merge introduces three patches that are later reverted,

   - Switching of MSR_TSC_AUX in SVM was thought to cause a host
     misbehavior, but it was later cleared of those doubts and the patch
     moved code to a hot path, so we reverted it.  That patch also
     needed a fix for 32 bit builds and both were reverted in one go.

   - Al Viro noticed that a fix for a leak in an error path was not
     valid with the given API and provided a better fix, so the original
     patch was reverted.

  Then there are two VMX fixes that move code around because VMCS was
  not accessed between vcpu_load() and vcpu_put(), a simple ARM VHE fix,
  and two one-liners for PML and MTRR"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  arm64: KVM: VHE: Context switch MDSCR_EL1
  KVM: VMX: handle PML full VMEXIT that occurs during event delivery
  Revert "KVM: SVM: fix trashing of MSR_TSC_AUX"
  KVM: SVM: do not set MSR_TSC_AUX on 32-bit builds
  KVM: don't use anon_inode_getfd() before possible failures
  Revert "KVM: release anon file in failure path of vm creation"
  KVM: release anon file in failure path of vm creation
  KVM: nVMX: Fix memory corruption when using VMCS shadowing
  kvm: vmx: ensure VMCS is current while enabling PML
  KVM: SVM: fix trashing of MSR_TSC_AUX
  KVM: MTRR: fix kvm_mtrr_check_gfn_range_consistency page fault

Pull perf fixes from Ingo Molnar:
 "This tree contains tooling fixes plus some additions:

   - fixes to the vdso2c build environment that Stephen Rothwell is
     using for the linux-next build (Arnaldo Carvalho de Melo)

   - AVX-512 instruction mappings (Adrian Hunter)

   - misc fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "perf tools: event.h needs asm/perf_regs.h"
  x86: Make the vdso2c compiler use the host architecture headers
  tools build: Fix objtool build with ARCH=x86_64
  objtool: Always use host headers
  objtool: Use tools/scripts/Makefile.arch to get ARCH and HOSTARCH
  tools build: Add HOSTARCH Makefile variable
  perf tests kmod-path: Fix build on ubuntu:16.04-x-armhf
  perf tools: Add AVX-512 instructions to the new instructions test
  perf tools: Add AVX-512 support to the instruction decoder used by Intel PT
  x86/insn: Add AVX-512 support to the instruction decoder
  x86/insn: perf tools: Fix vcvtph2ps instruction decoding

Pull irq updates from Thomas Gleixner:
 "The irq department delivers:

   - new core infrastructure to allow better management of multi-queue
     devices (interrupt spreading, node aware descriptor allocation ...)

   - a new interrupt flow handler to support the new fangled Intel VMD
     devices.

   - yet another new interrupt controller driver.

   - a series of fixes which addresses sparse warnings, missing
     includes, missing static declarations etc from Ben Dooks.

   - a fix for the error handling in the hierarchical domain allocation
     code.

   - the usual pile of small updates to core and driver code"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  genirq: Fix missing irq allocation affinity hint
  irqdomain: Fix irq_domain_alloc_irqs_recursive() error handling
  irq/Documentation: Correct result of echnoing 5 to smp_affinity
  MAINTAINERS: Remove Jiang Liu from irq domains
  genirq/msi: Fix broken debug output
  genirq: Add a helper to spread an affinity mask for MSI/MSI-X vectors
  genirq/msi: Make use of affinity aware allocations
  genirq: Use affinity hint in irqdesc allocation
  genirq: Add affinity hint to irq allocation
  genirq: Introduce IRQD_AFFINITY_MANAGED flag
  genirq/msi: Remove unused MSI_FLAG_IDENTITY_MAP
  irqchip/s3c24xx: Fixup IO accessors for big endian
  irqchip/exynos-combiner: Fix usage of __raw IO
  irqdomain: Fix disposal of mappings for interrupt hierarchies
  irqchip/aspeed-vic: Add irq controller for Aspeed
  doc/devicetree: Add Aspeed VIC bindings
  x86/PCI/VMD: Use untracked irq handler
  genirq: Add untracked irq handler
  irqchip/mips-gic: Populate irq_domain names
  irqchip/gicv3-its: Implement two-level(indirect) device table support
  ...

Pull timer updates from Thomas Gleixner:
 "This update provides the following changes:

   - The rework of the timer wheel which addresses the shortcomings of
     the current wheel (cascading, slow search for next expiring timer,
     etc).  That's the first major change of the wheel in almost 20
     years since Finn implemted it.

   - A large overhaul of the clocksource drivers init functions to
     consolidate the Device Tree initialization

   - Some more Y2038 updates

   - A capability fix for timerfd

   - Yet another clock chip driver

   - The usual pile of updates, comment improvements all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits)
  tick/nohz: Optimize nohz idle enter
  clockevents: Make clockevents_subsys static
  clocksource/drivers/time-armada-370-xp: Fix return value check
  timers: Implement optimization for same expiry time in mod_timer()
  timers: Split out index calculation
  timers: Only wake softirq if necessary
  timers: Forward the wheel clock whenever possible
  timers/nohz: Remove pointless tick_nohz_kick_tick() function
  timers: Optimize collect_expired_timers() for NOHZ
  timers: Move __run_timers() function
  timers: Remove set_timer_slack() leftovers
  timers: Switch to a non-cascading wheel
  timers: Reduce the CPU index space to 256k
  timers: Give a few structs and members proper names
  hlist: Add hlist_is_singular_node() helper
  signals: Use hrtimer for sigtimedwait()
  timers: Remove the deprecated mod_timer_pinned() API
  timers, net/ipv4/inet: Initialize connection request timers as pinned
  timers, drivers/tty/mips_ejtag: Initialize the poll timer as pinned
  timers, drivers/tty/metag_da: Initialize the poll timer as pinned
  ...

Pull x86 fix from Ingo Molnar:
 "Leftover fix from the v4.7 cycle: adds a reboot quirk"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/reboot: Add Dell Optiplex 7450 AIO reboot quirk

Pull x86 timer updates from Ingo Molnar:
 "The main change in this tree is the reworking, fixing and extension of
  the TSC frequency enumeration code (by Len Brown)"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Remove the unused check_tsc_disabled()
  x86/tsc: Enumerate BXT tsc_khz via CPUID
  x86/tsc: Enumerate SKL cpu_khz and tsc_khz via CPUID
  x86/tsc_msr: Remove irqoff around MSR-based TSC enumeration
  x86/tsc_msr: Add Airmont reference clock values
  x86/tsc_msr: Correct Silvermont reference clock values
  x86/tsc_msr: Update comments, expand definitions
  x86/tsc_msr: Remove debugging messages
  x86/tsc_msr: Identify Intel-specific code
  Revert "x86/tsc: Add missing Cherrytrail frequency to the table"

Pull x86 platform updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Intel-SoC enhancements (Andy Shevchenko)

   - Intel CPU symbolic model definition rework (Dave Hansen)

   - ... other misc changes"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  x86/sfi: Enable enumeration of SD devices
  x86/pci: Use MRFLD abbreviation for Merrifield
  x86/platform/intel-mid: Make vertical indentation consistent
  x86/platform/intel-mid: Mark regulators explicitly defined
  x86/platform/intel-mid: Rename mrfl.c to mrfld.c
  x86/platform/intel-mid: Enable spidev on Intel Edison boards
  x86/platform/intel-mid: Extend PWRMU to support Penwell
  x86/pci, x86/platform/intel_mid_pci: Remove duplicate power off code
  x86/platform/intel-mid: Add pinctrl for Intel Merrifield
  x86/platform/intel-mid: Enable GPIO expanders on Edison
  x86/platform/intel-mid: Add Power Management Unit driver
  x86/platform/atom/punit: Enable support for Merrifield
  x86/platform/intel_mid_pci: Rework IRQ0 workaround
  x86, thermal: Clean up and fix CPU model detection for intel_soc_dts_thermal
  x86, mmc: Use Intel family name macros for mmc driver
  x86/intel_telemetry: Use Intel family name macros for telemetry driver
  x86/acpi/lss: Use Intel family name macros for the acpi_lpss driver
  x86/cpufreq: Use Intel family name macros for the intel_pstate cpufreq driver
  x86/platform: Use new Intel model number macros
  x86/intel_idle: Use Intel family macros for intel_idle
  ...

Pull x86 fpu updates from Ingo Molnar:
 "The main x86 FPU changes in this cycle were:

   - a large series of cleanups, fixes and enhancements to re-enable the
     XSAVES instruction on Intel CPUs - which is the most advanced
     instruction to do FPU context switches (Yu-cheng Yu, Fenghua Yu)

   - Add FPU tracepoints for the FPU state machine (Dave Hansen)"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Do not BUG_ON() in early FPU code
  x86/fpu/xstate: Re-enable XSAVES
  x86/fpu/xstate: Fix fpstate_init() for XRSTORS
  x86/fpu/xstate: Return NULL for disabled xstate component address
  x86/fpu/xstate: Fix __fpu_restore_sig() for XSAVES
  x86/fpu/xstate: Fix xstate_offsets, xstate_sizes for non-extended xstates
  x86/fpu/xstate: Fix XSTATE component offset print out
  x86/fpu/xstate: Fix PTRACE frames for XSAVES
  x86/fpu/xstate: Fix supervisor xstate component offset
  x86/fpu/xstate: Align xstate components according to CPUID
  x86/fpu/xstate: Copy xstate registers directly to the signal frame when compacted format is in use
  x86/fpu/xstate: Keep init_fpstate.xsave.header.xfeatures as zero for init optimization
  x86/fpu/xstate: Rename 'xstate_size' to 'fpu_kernel_xstate_size', to distinguish it from 'fpu_user_xstate_size'
  x86/fpu/xstate: Define and use 'fpu_user_xstate_size'
  x86/fpu: Add tracepoints to dump FPU state at key points

Pull x86 stackdump update from Ingo Molnar:
 "A number of stackdump enhancements"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/dumpstack: Add show_stack_regs() and use it
  printk: Make the printk*once() variants return a value
  x86/dumpstack: Honor supplied @regs arg

Pull x86 cleanups from Ingo Molnar:
 "Three small cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lguest: Read offset of device_cap later
  lguest: Read length of device_cap later
  x86: Do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB

Pull x86 build updates from Ingo Molnar:
 "A build system fix and a cleanup"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kbuild: Remove stale asm-generic wrappers
  kbuild, x86: Track generated headers with generated-y

Pull x86 boot updates from Ingo Molnar:
 "The main changes:

   - add initial commits to randomize kernel memory section virtual
     addresses, enabled via a new kernel option: RANDOMIZE_MEMORY
     (Thomas Garnier, Kees Cook, Baoquan He, Yinghai Lu)

   - enhance KASLR (RANDOMIZE_BASE) physical memory randomization (Kees
     Cook)

   - EBDA/BIOS region boot quirk cleanups (Andy Lutomirski, Ingo Molnar)

   - misc cleanups/fixes"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Simplify EBDA-vs-BIOS reservation logic
  x86/boot: Clarify what x86_legacy_features.reserve_bios_regions does
  x86/boot: Reorganize and clean up the BIOS area reservation code
  x86/mm: Do not reference phys addr beyond kernel
  x86/mm: Add memory hotplug support for KASLR memory randomization
  x86/mm: Enable KASLR for vmalloc memory regions
  x86/mm: Enable KASLR for physical mapping memory regions
  x86/mm: Implement ASLR for kernel memory regions
  x86/mm: Separate variable for trampoline PGD
  x86/mm: Add PUD VA support for physical mapping
  x86/mm: Update physical mapping variable names
  x86/mm: Refactor KASLR entropy functions
  x86/KASLR: Fix boot crash with certain memory configurations
  x86/boot/64: Add forgotten end of function marker
  x86/KASLR: Allow randomization below the load address
  x86/KASLR: Extend kernel image physical address randomization to addresses larger than 4G
  x86/KASLR: Randomize virtual address separately
  x86/KASLR: Clarify identity map interface
  x86/boot: Refuse to build with data relocations
  x86/KASLR, x86/power: Remove x86 hibernation restrictions

Pull x86 mm updates from Ingo Molnar:
 "Various x86 low level modifications:

   - preparatory work to support virtually mapped kernel stacks (Andy
     Lutomirski)

   - support for 64-bit __get_user() on 32-bit kernels (Benjamin
     LaHaise)

   - (involved) workaround for Knights Landing CPU erratum (Dave Hansen)

   - MPX enhancements (Dave Hansen)

   - mremap() extension to allow remapping of the special VDSO vma, for
     purposes of user level context save/restore (Dmitry Safonov)

   - hweight and entry code cleanups (Borislav Petkov)

   - bitops code generation optimizations and cleanups with modern GCC
     (H. Peter Anvin)

   - syscall entry code optimizations (Paolo Bonzini)"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
  x86/mm/cpa: Add missing comment in populate_pdg()
  x86/mm/cpa: Fix populate_pgd(): Stop trying to deallocate failed PUDs
  x86/syscalls: Add compat_sys_preadv64v2/compat_sys_pwritev64v2
  x86/smp: Remove unnecessary initialization of thread_info::cpu
  x86/smp: Remove stack_smp_processor_id()
  x86/uaccess: Move thread_info::addr_limit to thread_struct
  x86/dumpstack: Rename thread_struct::sig_on_uaccess_error to sig_on_uaccess_err
  x86/uaccess: Move thread_info::uaccess_err and thread_info::sig_on_uaccess_err to thread_struct
  x86/dumpstack: When OOPSing, rewind the stack before do_exit()
  x86/mm/64: In vmalloc_fault(), use CR3 instead of current->active_mm
  x86/dumpstack/64: Handle faults when printing the "Stack: " part of an OOPS
  x86/dumpstack: Try harder to get a call trace on stack overflow
  x86/mm: Remove kernel_unmap_pages_in_pgd() and efi_cleanup_page_tables()
  x86/mm/cpa: In populate_pgd(), don't set the PGD entry until it's populated
  x86/mm/hotplug: Don't remove PGD entries in remove_pagetable()
  x86/mm: Use pte_none() to test for empty PTE
  x86/mm: Disallow running with 32-bit PTEs to work around erratum
  x86/mm: Ignore A/D bits in pte/pmd/pud_none()
  x86/mm: Move swap offset/type up in PTE to work around erratum
  x86/entry: Inline enter_from_user_mode()
  ...

Pull x86/apic updates from Ingo Molnar:
 "Misc cleanups and a small fix"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Remove the unused struct apic::apic_id_mask field
  x86/apic: Fix misspelled APIC
  x86/ioapic: Simplify ioapic_setup_resources()

Pull NOHZ updates from Ingo Molnar:

 - fix system/idle cputime leaked on cputime accounting (all nohz
   configs) (Rik van Riel)

 - remove the messy, ad-hoc irqtime account on nohz-full and make it
   compatible with CONFIG_IRQ_TIME_ACCOUNTING=y instead (Rik van Riel)

 - cleanups (Frederic Weisbecker)

 - remove unecessary irq disablement in the irqtime code (Rik van Riel)

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cputime: Drop local_irq_save/restore from irqtime_account_irq()
  sched/cputime: Reorganize vtime native irqtime accounting headers
  sched/cputime: Clean up the old vtime gen irqtime accounting completely
  sched/cputime: Replace VTIME_GEN irq time code with IRQ_TIME_ACCOUNTING code
  sched/cputime: Count actually elapsed irq & softirq time

Pull scheduler updates from Ingo Molnar:

 - introduce and use task_rcu_dereference()/try_get_task_struct() to fix
   and generalize task_struct handling (Oleg Nesterov)

 - do various per entity load tracking (PELT) fixes and optimizations
   (Peter Zijlstra)

 - cputime virt-steal time accounting enhancements/fixes (Wanpeng Li)

 - introduce consolidated cputime output file cpuacct.usage_all and
   related refactorings (Zhao Lei)

 - ... plus misc fixes and enhancements

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Panic on scheduling while atomic bugs if kernel.panic_on_warn is set
  sched/cpuacct: Introduce cpuacct.usage_all to show all CPU stats together
  sched/cpuacct: Use loop to consolidate code in cpuacct_stats_show()
  sched/cpuacct: Merge cpuacct_usage_index and cpuacct_stat_index enums
  sched/fair: Rework throttle_count sync
  sched/core: Fix sched_getaffinity() return value kerneldoc comment
  sched/fair: Reorder cgroup creation code
  sched/fair: Apply more PELT fixes
  sched/fair: Fix PELT integrity for new tasks
  sched/cgroup: Fix cpu_cgroup_fork() handling
  sched/fair: Fix PELT integrity for new groups
  sched/fair: Fix and optimize the fork() path
  sched/cputime: Add steal time support to full dynticks CPU time accounting
  sched/cputime: Fix prev steal time accouting during CPU hotplug
  KVM: Fix steal clock warp during guest CPU hotplug
  sched/debug: Always show 'nr_migrations'
  sched/fair: Use task_rcu_dereference()
  sched/api: Introduce task_rcu_dereference() and try_get_task_struct()
  sched/idle: Optimize the generic idle loop
  sched/fair: Fix the wrong throttled clock time for cfs_rq_clock_task()

Pull perf updates from Ingo Molnar:
 "With over 300 commits it's been a busy cycle - with most of the work
  concentrated on the tooling side (as it should).

  The main kernel side enhancements were:

   - Add per event callchain limit: Recently we introduced a sysctl to
     tune the max-stack for all events for which callchains were
     requested:

       $ sysctl kernel.perf_event_max_stack
       kernel.perf_event_max_stack = 127

     Now this patch introduces a way to configure this per event, i.e.
     this becomes possible:

       $ perf record -e sched:*/max-stack=2/ -e block:*/max-stack=10/ -a

     allowing finer tuning of how much buffer space callchains use.

     This uses an u16 from the reserved space at the end, leaving
     another u16 for future use.

     There has been interest in even finer tuning, namely to control the
     max stack for kernel and userspace callchains separately.  Further
     discussion is needed, we may for instance use the remaining u16 for
     that and when it is present, assume that the sample_max_stack
     introduced in this patch applies for the kernel, and the u16 left
     is used for limiting the userspace callchain (Arnaldo Carvalho de
     Melo)

   - Optimize AUX event (hardware assisted side-band event) delivery
     (Kan Liang)

   - Rework Intel family name macro usage (this is partially x86 arch
     work) (Dave Hansen)

   - Refine and fix Intel LBR support (David Carrillo-Cisneros)

   - Add support for Intel 'TopDown' events (Andi Kleen)

   - Intel uncore PMU driver fixes and enhancements (Kan Liang)

   - ... other misc changes.

  Here's an incomplete list of the tooling enhancements (but there's
  much more, see the shortlog and the git log for details):

   - Support cross unwinding, i.e.  collecting '--call-graph dwarf'
     perf.data files in one machine and then doing analysis in another
     machine of a different hardware architecture.  This enables, for
     instance, to do:

       $ perf record -a --call-graph dwarf

     on a x86-32 or aarch64 system and then do 'perf report' on it on a
     x86_64 workstation (He Kuang)

   - Allow reading from a backward ring buffer (one setup via
     sys_perf_event_open() with perf_event_attr.write_backward = 1)
     (Wang Nan)

   - Finish merging initial SDT (Statically Defined Traces) support, see
     cset comments for details about how it all works (Masami Hiramatsu)

   - Support attaching eBPF programs to tracepoints (Wang Nan)

   - Add demangling of symbols in programs written in the Rust language
     (David Tolnay)

   - Add support for tracepoints in the python binding, including an
     example, that sets up and parses sched:sched_switch events,
     tools/perf/python/tracepoint.py (Jiri Olsa)

   - Introduce --stdio-color to set up the color output mode selection
     in 'annotate' and 'report', allowing emit color escape sequences
     when redirecting the output of these tools (Arnaldo Carvalho de
     Melo)

   - Add 'callindent' option to 'perf script -F', to indent the Intel PT
     call stack, making this output more ftrace-like (Adrian Hunter,
     Andi Kleen)

   - Allow dumping the object files generated by llvm when processing
     eBPF scriptlet events (Wang Nan)

   - Add stackcollapse.py script to help generating flame graphs (Paolo
     Bonzini)

   - Add --ldlat option to 'perf mem' to specify load latency for loads
     event (e.g. cpu/mem-loads/ ) (Jiri Olsa)

   - Tooling support for Intel TopDown counters, recently added to the
     kernel (Andi Kleen)"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (303 commits)
  perf tests: Add is_printable_array test
  perf tools: Make is_printable_array global
  perf script python: Fix string vs byte array resolving
  perf probe: Warn unmatched function filter correctly
  perf cpu_map: Add more helpers
  perf stat: Balance opening and reading events
  tools: Copy linux/{hash,poison}.h and check for drift
  perf tools: Remove include/linux/list.h from perf's MANIFEST
  tools: Copy the bitops files accessed from the kernel and check for drift
  Remove: kernel unistd*h files from perf's MANIFEST, not used
  perf tools: Remove tools/perf/util/include/linux/const.h
  perf tools: Remove tools/perf/util/include/asm/byteorder.h
  perf tools: Add missing linux/compiler.h include to perf-sys.h
  perf jit: Remove some no-op error handling
  perf jit: Add missing curly braces
  objtool: Initialize variable to silence old compiler
  objtool: Add -I$(srctree)/tools/arch/$(ARCH)/include/uapi
  perf record: Add --tail-synthesize option
  perf session: Don't warn about out of order event if write_backward is used
  perf tools: Enable overwrite settings
  ...

Pull RAS updates from Ingo Molnar:
 "The biggest change in this cycle was an enhancement by Yazen Ghannam
  to reduce the number of MCE error injection related IPIs.

  The rest are smaller fixes"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Fix mce_rdmsrl() warning message
  x86/RAS/AMD: Reduce the number of IPIs when prepping error injection
  x86/mce/AMD: Increase size of the bank_map type
  x86/mce: Do not use bank 1 for APEI generated error logs

Pull locking updates from Ingo Molnar:
 "The locking tree was busier in this cycle than the usual pattern - a
  couple of major projects happened to coincide.

  The main changes are:

   - implement the atomic_fetch_{add,sub,and,or,xor}() API natively
     across all SMP architectures (Peter Zijlstra)

   - add atomic_fetch_{inc/dec}() as well, using the generic primitives
     (Davidlohr Bueso)

   - optimize various aspects of rwsems (Jason Low, Davidlohr Bueso,
     Waiman Long)

   - optimize smp_cond_load_acquire() on arm64 and implement LSE based
     atomic{,64}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
     on arm64 (Will Deacon)

   - introduce smp_acquire__after_ctrl_dep() and fix various barrier
     mis-uses and bugs (Peter Zijlstra)

   - after discovering ancient spin_unlock_wait() barrier bugs in its
     implementation and usage, strengthen its semantics and update/fix
     usage sites (Peter Zijlstra)

   - optimize mutex_trylock() fastpath (Peter Zijlstra)

   - ... misc fixes and cleanups"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
  locking/atomic: Introduce inc/dec variants for the atomic_fetch_$op() API
  locking/barriers, arch/arm64: Implement LDXR+WFE based smp_cond_load_acquire()
  locking/static_keys: Fix non static symbol Sparse warning
  locking/qspinlock: Use __this_cpu_dec() instead of full-blown this_cpu_dec()
  locking/atomic, arch/tile: Fix tilepro build
  locking/atomic, arch/m68k: Remove comment
  locking/atomic, arch/arc: Fix build
  locking/Documentation: Clarify limited control-dependency scope
  locking/atomic, arch/rwsem: Employ atomic_long_fetch_add()
  locking/atomic, arch/qrwlock: Employ atomic_fetch_add_acquire()
  locking/atomic, arch/mips: Convert to _relaxed atomics
  locking/atomic, arch/alpha: Convert to _relaxed atomics
  locking/atomic: Remove the deprecated atomic_{set,clear}_mask() functions
  locking/atomic: Remove linux/atomic.h:atomic_fetch_or()
  locking/atomic: Implement atomic{,64,_long}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
  locking/atomic: Fix atomic64_relaxed() bits
  locking/atomic, arch/xtensa: Implement atomic_fetch_{add,sub,and,or,xor}()
  locking/atomic, arch/x86: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
  locking/atomic, arch/tile: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
  locking/atomic, arch/sparc: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
  ...

Pull EFI updates from Ingo Molnar:
 "The biggest change in this cycle were SGI/UV related changes that
  clean up and fix UV boot quirks and problems.

  There's also various smaller cleanups and refinements"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Reorganize the GUID table to make it easier to read
  x86/efi: Remove the unused efi_get_time() function
  x86/efi: Update efi_thunk() to use the the arch_efi_call_virt*() macros
  x86/uv: Update uv_bios_call() to use efi_call_virt_pointer()
  efi: Convert efi_call_virt() to efi_call_virt_pointer()
  x86/efi: Remove unused variable 'efi'
  efi: Document #define FOO_PROTOCOL_GUID layout
  efibc: Report more information in the error messages

Pull RCU updates from Ingo Molnar:
 "The main changes in this cycle were:

   - documentation updates

   - miscellaneous fixes

   - minor reorganization of code

   - torture-test updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  rcu: Correctly handle sparse possible cpus
  rcu: sysctl: Panic on RCU Stall
  rcu: Fix a typo in a comment
  rcu: Make call_rcu_tasks() tolerate first call with irqs disabled
  rcu: Disable TASKS_RCU for usermode Linux
  rcu: No ordering for rcu_assign_pointer() of NULL
  rcutorture: Fix error return code in rcu_perf_init()
  torture: Inflict default jitter
  rcuperf: Don't treat gp_exp mis-setting as a WARN
  rcutorture: Drop "-soundhw pcspkr" from x86 boot arguments
  rcutorture: Don't specify the cpu type of QEMU on PPC
  rcutorture: Make -soundhw a x86 specific option
  rcutorture: Use vmlinux as the fallback kernel image
  rcutorture/doc: Create initrd using dracut
  torture: Stop onoff task if there is only one cpu
  torture: Add starvation events to error summary
  torture:  Break online and offline functions out of torture_onoff()
  torture: Forgive lengthy trace dumps and preemption
  torture: Remove CONFIG_RCU_TORTURE_TEST_RUNNABLE, simplify code
  torture: Simplify code, eliminate RCU_PERF_TEST_RUNNABLE
  ...

Merge tag 'perf-core-for-mingo-20160725' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

- Add AVX-512 support to the instruction decoder, used by Intel PT,
  fix vcvtph2ps instruction decoding (Adrian Hunter)

- Make objtool and vdso2c use the right arch header search path
  (Stephen Rothwell, Josh Poimboeuf, Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

This reverts commit e083a21f.

Not needed at all, tools/perf/util/perf_regs.h, included via:

  #include "perf_regs.h"

Should have a definition for PERF_REGS_MAX, and since this is dependent
on HAVE_PERF_REGS_SUPPORT, fixes the build on powerpc, noticed by trying
to cross compile this from ubuntu16.04 with a locally build libz &
elfutils pair, since those are not available in multilib packages.

Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-0bv204s71t4wuw1l53b6fz79@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To be clear: this is a ppc64le hosted, x86_64 target cross build.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160723150845.3af8e452@canb.auug.org.auSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'hwmon-for-linus-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - New drivers for FTS BMC "Teutates", TI INA3221, and Sensirion SHT3x.

 - Added support for Microchip MCP9808 and TI TMP461.

 - Cleanup and minor fixes in various drivers.

* tag 'hwmon-for-linus-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (37 commits)
  Documentation: dtb: xgene: Add hwmon dts binding documentation
  hwmon: (ftsteutates) Remove unused including <linux/version.h>
  hwmon: (adt7411) set bit 3 in CFG1 register
  hwmon: Add driver for FTS BMC chip "Teutates"
  hwmon: (sht3x) add humidity heater element control
  hwmon: (jc42) Add support for generic JC-42.4 devicetree binding
  dt/bindings: Add bindings for JC-42.4 compatible temperature sensors
  hwmon: (tmp102) Convert to use regmap, and drop local cache
  hwmon: (tmp102) Rework chip configuration
  hwmon: (tmp102) Improve handling of initial read delay
  hwmon: (lm90) Drop unnecessary else statements
  hwmon: (lm90) Use bool for valid flag
  hwmon: (lm90) Read limit registers only once
  hwmon: (lm90) Simplify read functions
  hwmon: (lm90) Use devm_hwmon_device_register_with_groups
  hwmon: (lm90) Use devm_add_action for cleanup
  hwmon: (lm75) Convert to use regmap
  hwmon: (lm75) Add update_interval attribute
  hwmon: (lm75) Drop lm75_read_value and lm75_write_value
  hwmon: (lm75) Handle cleanup with devm_add_action
  ...

Merge tag 'renesas-sh-drivers-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

Pull SH drivers updates from Simon Horman:
 "Drop use of SH Drivers on Renesas ARM Based SoCs.

  I expect this to be my last pull request for these drivers as it
  removes usage of them from Renesas ARM Based SoCs and my
  co-maintenance of them.

  The drivers are still used by some SH SoCs and listed under SUPERH in
  the MAINTAINERS file"

* tag 'renesas-sh-drivers-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  MAINTAINERS: Drop drivers/sh/ for Renesas ARM
  drivers: sh: Stop using the legacy clock domain on ARM

Pull USB updates from Greg KH:
 "Here's the big USB driver update for 4.8-rc1.  Lots of the normal
  stuff in here, musb, gadget, xhci, and other updates and fixes.  All
  of the details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
  cdc-acm: beautify probe()
  cdc-wdm: use the common CDC parser
  cdc-acm: cleanup error handling
  cdc-acm: use the common parser
  usbnet: move the CDC parser into USB core
  usb: musb: sunxi: Simplify dr_mode handling
  usb: musb: sunxi: make unexported symbols static
  usb: musb: cppi41: add dma channel tracepoints
  usb: musb: cppi41: move struct cppi41_dma_channel to header
  usb: musb: cleanup cppi_dma header
  usb: musb: gadget: add usb-request tracepoints
  usb: musb: host: add urb tracepoints
  usb: musb: add tracepoints to dump interrupt events
  usb: musb: add tracepoints for register access
  usb: musb: dsps: use musb register read/write wrappers instead
  usb: musb: switch dev_dbg to tracepoints
  usb: musb: add tracepoints support for debugging
  usb: quirks: Add no-lpm quirk for Elan
  phy: rcar-gen3-usb2: fix mutex_lock calling in interrupt
  phy: rockhip-usb: use devm_add_action_or_reset()
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty and serial driver update for 4.8-rc1.

  Lots of good cleanups from Jiri on a number of vt and other tty
  related things, and the normal driver updates.  Full details are in
  the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits)
  tty/serial: atmel: enforce tasklet init and termination sequences
  serial: sh-sci: Stop transfers in sci_shutdown()
  serial: 8250_ingenic: drop #if conditional surrounding earlycon code
  serial: 8250_mtk: drop !defined(MODULE) conditional
  serial: 8250_uniphier: drop !defined(MODULE) conditional
  earlycon: mark earlycon code as __used iif the caller is built-in
  tty/serial/8250: use mctrl_gpio helpers
  serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct
  serial: mctrl_gpio: add modem control read routine
  tty/serial/8250: make UART_MCR register access consistent
  serial: 8250_mid: Read RX buffer on RX DMA timeout for DNV
  serial: 8250_dma: Export serial8250_rx_dma_flush()
  dmaengine: hsu: Export hsu_dma_get_status()
  tty: serial: 8250: add CON_CONSDEV to flags
  tty: serial: samsung: add byte-order aware bit functions
  tty: serial: samsung: fixup accessors for endian
  serial: sirf: make fifo functions static
  serial: mps2-uart: make driver explicitly non-modular
  serial: mvebu-uart: free the IRQ in ->shutdown()
  serial/bcm63xx_uart: use correct alias naming
  ...

Pull staging and IIO driver updates from Greg KH:
 "Here is the big Staging and IIO driver update for 4.8-rc1.

  We ended up adding more code than removing, again, but it's not all
  that bad.  Lots of cleanups all over the staging tree, and new IIO
  drivers, full details in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (417 commits)
  drivers:iio:accel:mma8452: removed unwanted return statements
  drivers:iio:accel:mma8452: added cleanup provision in case of failure.
  iio: Add iio.git tree to MAINTAINERS
  iio:st_pressure: clean useless static channel initializers
  iio:st_pressure:lps22hb: temperature support
  iio:st_pressure:lps22hb: open drain support
  iio:st_pressure: temperature triggered buffering
  iio:st_pressure: document sampling gains
  iio:st_pressure: align storagebits on power of 2
  iio:st_sensors: align on storagebits boundaries
  staging:iio:lis3l02dq drop separate driver
  iio: accel: st_accel: Add lis3l02dq support
  iio: adc: add missing of_node references to iio_dev
  iio: adc: ti-ads1015: add indio_dev->dev.of_node reference
  iio: potentiometer: Fix typo in Kconfig
  iio: potentiometer: mcp4531: Add device tree binding
  iio: potentiometer: mcp4531: Add device tree binding documentation
  iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x and MCP466x
  iio:imu:mpu6050: icm20608 initial support
  iio: adc: max1363: Add device tree binding
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 4.8-rc1.

  Not a lot of stuff, but it's all over the place, full details are in
  the shortlog.  All of these have been in linux-next with no reported
  issues for a while"

* tag 'char-misc-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (49 commits)
  lkdtm: silence warnings about function declarations
  lkdtm: hide unused functions
  intel_th: pci: Add Kaby Lake PCH-H support
  intel_th: Fix a deadlock in modprobing
  dsp56k: prevent a harmless underflow
  chardev: add missing line break in pr_warn
  lkdtm: use struct arrays instead of enums
  lkdtm: move jprobe entry points to start of source
  lkdtm: reorganize module paramaters
  lkdtm: rename globals for clarity
  lkdtm: rename "count" to "crash_count"
  lkdtm: remove intentional off-by-one array access
  lkdtm: split remaining logic bug tests to separate file
  lkdtm: split heap corruption tests to separate file
  lkdtm: split memory permissions tests to separate file
  lkdtm: split usercopy tests to separate file
  lkdtm: drop "alloc_size" parameter
  lkdtm: add usercopy test for blocking kernel text
  extcon: adc-jack: add suspend/resume support
  extcon: add missing of_node_put after calling of_parse_phandle
  ...

Pull gfs2 updates from Bob Peterson:
 "We've got ten patches this time, half of which are related to a
  plethora of nasty outcomes when inodes are transitioned from the
  unlinked state to the free state.  Small file systems are particularly
  vulnerable to these problems, and it can manifest as mainly hangs, but
  also file system corruption.  The patches have been tested for
  literally many weeks, with a very gruelling test, so I have a high
  level of confidence.

   - Andreas Gruenbacher wrote a series of five patches for various
     lockups during the transition of inodes from unlinked to free.

     The main patch is titled "Fix gfs2_lookup_by_inum lock inversion"
     and the other four are support and cleanup patches related to that.

   - Ben Marzinski contributed two patches with regard to a recreatable
     problem when gfs2 tries to write a page to a file that is being
     truncated, resulting in a BUG() in gfs2_remove_from_journal.

     Note that Ben had to export vfs function __block_write_full_page to
     get this to work properly.  It's been posted a long time and he
     talked to various VFS people about it, and nobody seemed to mind.

   - I contributed 3 patches:
       o The first one fixes a memory corruptor: a race in which one
         process can overwrite the gl_object pointer set by another
         process, causing kernel panic and other symptoms.
       o The second patch fixes another race that resulted in a
         false-positive BUG_ON.  This occurred when resource group
         reservations were freed by one process while another process
         was trying to grab a new reservation in the same resource
         group.
       o The third patch fixes a problem with doing journal replay when
         the journals are not all the same size"

* tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  GFS2: Fix gfs2_replay_incr_blk for multiple journal sizes
  GFS2: Check rs_free with rd_rsspin protection
  gfs2: writeout truncated pages
  fs: export __block_write_full_page
  gfs2: Lock holder cleanup
  gfs2: Large-filesystem fix for 32-bit systems
  gfs2: Get rid of gfs2_ilookup
  gfs2: Fix gfs2_lookup_by_inum lock inversion
  gfs2: Initialize iopen glock holder for new inodes
  GFS2: don't set rgrp gl_object until it's inserted into rgrp tree