- 19 Mar, 2024 14 commits
-
-
Rodrigo Vivi authored
In case of the suspend/resume flow getting locked up we can get reports with some useful hints on where it might get locked and if that has failed. Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240318180141.267458-2-rodrigo.vivi@intel.comSigned-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Rodrigo Vivi authored
Let's be quieter on production configuration and let's also print the entry point of the gt suspend when debug messages are enabled. Reviewed-by:
-
Himal Prasad Ghimiray authored
vm->flags are already assigned with passed flags. Remove the redundant assignment. Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by:
Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240307065213.1968688-1-himal.prasad.ghimiray@intel.comSigned-off-by:
-
Juha-Pekka Heikkila authored
Mark dpt and related vma as uncached to avoid pipe faults on some devices. Signed-off-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by:
-
Matthew Auld authored
Otherwise in the case where we use normal system memory, the CPU access will always be cached, like when filling the DPT PTEs, which is likely not what we want since HW access could be incoherent on platforms like LNL. Marking as XE_BO_PAGETABLE will force wc/uc underneath on such platforms. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Nirmoy Das authored
Remove usage of unsafe strcpy with a helper function to convert engine class to string. Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Reviewed-by:
-
Nirmoy Das authored
The vma pointer can't be NULL here. Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by:
-
Matthew Auld authored
Here XE_MAX_TILES_PER_DEVICE is the gt array size, therefore the gt index should always be less than. v2 (Lucas): - Add fixes tag. Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by:
-
Matthew Auld authored
Here XE_MAX_GT_PER_TILE is the total, therefore the gt index should always be less than. Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by:
-
Matthew Auld authored
The engine_class is the index into the user_to_xe_engine_class, therefore it needs to be less than. Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by:
-
Nirmoy Das authored
Explicitly cast tbo->page_alignment to u64 before bit-shifting to prevent overflow when assigning to min_page_size. Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by:
-
Matthew Auld authored
The region can be used an index into the region_to_mem_type, so we should be asserting that it is less than the ARRAY_SIZE here. Signed-off-by:
-
Matthew Auld authored
If we fished it out the list then it can't be null; the list entry is embedded in the bo. Signed-off-by:
-
Matthew Auld authored
We use plain spinlock to protect readers and writers, so there is no actual RCU here. Rather use the more appropriate non-rcu list based API. Signed-off-by:
-
- 15 Mar, 2024 9 commits
-
-
Michal Wajdeczko authored
The Multi-Level LMTT variant is not specific only to the PVC. Change logic to select it for all new platforms beyond 12.60. Bspec: 52404, 67468 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
Michał Winiarski <michal.winiarski@intel.com>
-
Michal Wajdeczko authored
The LMTT Page Directory, as well as the directory entries, must be aligned on a 64KB boundary in VRAM. Use explicit alignment flag to match hardware requirement. Bspec: 52404, 67468 Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
While today we are getting VRAM allocations aligned to 64K as the XE_VRAM_FLAGS_NEED64K flag could be set, we shouldn't only rely on that flag and we should also allow caller to specify required 64K alignment explicitly. Define new XE_BO_NEEDS_64K flag for that. Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
Shortly we will updating xe_mmio_read|write() functions with SR-IOV specific features making those functions less suitable for inline. Convert now those functions into regular ones, lowering driver footprint, according to scripts/bloat-o-meter, by 6% add/remove: 18/18 grow/shrink: 31/603 up/down: 2719/-79663 (-76944) Function old new delta Total: Before=1276633, After=1199689, chg -6.03% add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0) Data old new delta Total: Before=48990, After=48990, chg +0.00% add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0) RO Data old new delta Total: Before=115680, After=115680, chg +0.00% Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
Interrupt registers 1900xx are VF accessible but only until version 12.50 as on newer platforms VFs are using memory-based interrupts. To avoid complexity, we mark those registers with XE_REG_OPTION_VF unconditionally, as IRQ handling on newer VFs is different anyway. Signed-off-by:
-
Michal Wajdeczko authored
Only selected registers are available for Virtual Functions. Reviewed-by:
-
Michal Wajdeczko authored
Only selected registers are available for Virtual Functions. Reviewed-by:
-
Michal Wajdeczko authored
We will tag registers that SR-IOV Virtual Functions can access. This will help us catch any invalid usage and/or provide custom replacement if available. Reviewed-by:
-
Michal Wajdeczko authored
We want to keep the struct xe_reg as small as possible. Make sure we don't accidentally change its size. Reviewed-by:
-
- 14 Mar, 2024 6 commits
-
-
Zhanjun Dong authored
Add helper macro to loop each DSS. This is a precursor patch to allow for easier iteration through MCR registers and other per-DSS uses. Signed-off-by:
Zhanjun Dong <zhanjun.dong@intel.com> Reviewed-by:
-
Matt Roper authored
Switch the MOCS-related debug messages to use a GT-specific logging function and add ID/type output to the beginning of the MOCS kunit test to assist with debug when problems arise. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Matt Roper authored
Although MOCS registers became multicast in graphics version 12.50 on the primary GT, this transition did not happen until version 20 on the media GT. Considering each GT independently is mostly important for MTL/ARL where the Xe_LPM+ IP has non-MCR MOCS registers, even though Xe_LPG IP has MCR registers. Bspec: 67789, 71186 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
Starting on Xe2, the GSCCS engine reset is a 2-step process. When the driver or the GuC hits the GDRST register, the CS is immediately reset and a success is reported, but the GSC shim continues its reset in the background. While the shim reset is ongoing, the CS is able to accept new context submission, but any commands that require the shim will be stalled until the reset is completed. This means that we can keep submitting to the GSCCS as long as we make sure that the preemption timeout is big enough to cover any delay introduced by the reset; since the GSC preempt timeout is not tunable at runtime, we only need to check that the value set in kconfig is big enough (and increase it if it isn't). When the shim reset completes, a specific CS interrupt is triggered, in response to which we need to check the GSCI_TIMER_STATUS register to see if the reset was successful or not. Note that the GSCI_TIMER_STATUS register is not power save/restored, so it gets reset on MC6 entry. However, a reset failure stops MC6, so in that scenario we're always guaranteed to find the correct value. Since we can't check the register within interrupt context, the existing GSC worker has been updated to handle it. The expected action to take on ER failure is to trigger a driver FLR, but we still don't support that, so for now we just print an error. A comment has been added to the code to keep track of the FLR requirement. v2: Add a check for the initial timeout value (Alan) Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by:
Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240304145634.820684-1-daniele.ceraolospurio@intel.com
-
Matthew Auld authored
drm_sched_init() expects jiffies for the timeout, but here we are passing the timeout in ms. Convert to jiffies instead. Fixes: eef55700 ("drm/xe: Add sysfs for default engine scheduler properties") Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240314121554.223229-2-matthew.auld@intel.comSigned-off-by:
-
Nirmoy Das authored
Property struct is not being used so remove it and related dead code. Fixes: ddfa2d6a ("drm/xe/uapi: Kill VM_MADVISE IOCTL") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: intel-xe@lists.freedesktop.org Signed-off-by:
-
- 13 Mar, 2024 7 commits
-
-
José Roberto de Souza authored
Doing a XE_EXEC with num_batch_buffer == 0 makes signals passed as argument to be signaled when the last real XE_EXEC is completed. But to do that it was first pinning all VMAs in drm_gpuvm_exec_lock(), this patch remove this pinning as it is not required. This change also help Mesa implementing memory over-commiting recovery as it needs to unbind not needed VMAs when the whole VM can't fit in GPU memory but it can only do the unbiding when the last XE_EXEC is completed. So with this change Mesa can get the signal it want without getting out-of-memory errors. Fixes: eb9702ad ("drm/xe: Allow num_batch_buffer / num_binds == 0 in IOCTLs") Cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Co-developed-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
-
Matthew Brost authored
The implementation of xe_device_assert_mem_access has a non-zero cost. Use xe_assert rather than XE_WARN_ON so it will compile out in non-debug kernel builds (Kconfig CONFIG_DRM_XE_DEBUG=n). Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Himal Prasad Ghimiray authored
At label err_unlock_list the condition write_label will never be true. Remove the deadcode line for write_label true. Reported by static analyzer. Cc: Matthew Brost <matthew.brost@intel.com> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: Bommu Krishnaiah <krishnaiah.bommu@intel.com> Reviewed-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Signed-off-by:
-
Himal Prasad Ghimiray authored
Return after warning regarding kobj creation failure. Fixes: 4ae3aeab ("drm/xe: Add vram frequency sysfs attributes") Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: Bommu Krishnaiah <krishnaiah.bommu@intel.com> Reviewed-by:
-
Shuicheng Lin authored
The fence print in xe_gt_tlb_invalidation_fence and xe_hw_fence is with "%p", change fence print in xe_sched_job to "%p" also. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by:
-
Lucas De Marchi authored
As was done for the normal kunit tests, group the live tests into a single module, xe_live_test.ko. Reviewed-by:
-
Matthew Brost authored
Rather than return an error to the user or ban the VM when userptr VMA page pin fails with -EFAULT, invalidate VMA mappings. This supports the UMD use case of freeing userptr while still having bindings. Now that non-faulting VMs can invalidate VMAs, drop the usm prefix for the tile_invalidated member. v2: - Fix build error (CI) v3: - Don't invalidate VMA if in fault mode, rather kill VM (Thomas) - Update commit message with tile_invalidated name chagne (Thomas) - Wait VM bookkeep slots with VM resv lock (Thomas) v4: - Move list_del_init(&userptr.repin_link) after error check (Thomas) - Assert not in fault mode (Matthew) Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240312183907.933835-1-matthew.brost@intel.com
-
- 12 Mar, 2024 1 commit
-
-
Matt Roper authored
For modern platforms (MTL and later), both kernel and userspace drivers are expected to apply GT programming and workarounds based on the IP version and stepping self-reported by the GT hardware via the GMD_ID registers. Since userspace drivers can't access these registers directly, pass along the version and stepping information via the GT list query. Note that the new query fields will remain 0's when running on pre-GMD_ID platforms. Userspace is expected to continue using PCI devid / revid on those older platforms. Although the hardware also has a GMD_ID register for display version/stepping, that value is intentionally *not* included anywhere in the Xe uapi. Display userspace should be using platform-agnostic APIs and auto-detecting platform capabilities rather than matching specific IP versions. v2: - s/revid/rev/ (Lucas) - Fix kerneldoc copy/paste mistakes Signed-off-by:
-
- 11 Mar, 2024 1 commit
-
-
Suraj Kandpal authored
Add condition for check of hdcp gsc cs requirement rather than assuming gsc cs to always be required when xe is loaded. It is not required for display version < 14 --v2 -Use display version in commit message [Lucas] Fixes: 152f2df9 ("drm/xe/hdcp: Enable HDCP for XE") Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240308154939.1940960-2-suraj.kandpal@intel.com
-
- 08 Mar, 2024 2 commits
-
-
Lucas De Marchi authored
With the current state GUC_WA_RCS_REGS_IN_CCS_REGS_LIST could in theory be removed since there is no render register being added to the list of compute WAs. However the real issue is that 18020744125 is incomplete and not setting the RING_HWSTAM on render as it should. Writing this in RTP is a little more tricky as we want to write to another's engine base when the match happens: first compute engine and no render present. So use RING_HWSTAM(RENDER_RING_BASE) instead of the usual XE_RTP_ACTION_FLAG(ENGINE_BASE). Reviewed-by:
-
Lucas De Marchi authored
Commit e89f4967 ("drm/xe: Drop WA 16015675438") removed the only user of that register and should have removed it. Remove it now. Reviewed-by:
-
