rt5663 needs mclk/sclk early to synchronize its internal clocks. Enable
these clocks early.
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Extended I2S config blob supports multiple mclk dividers in NHLT blob.
This patch detects whether the I2S blob is legacy or extended based on the
signature value and chooses the mclk source and divider accordingly.
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

For certain platforms, it is required to start the clocks (mclk/sclk/fs)
before the stream start. Example: for few chrome systems, codec needs the
mclk/sclk to be enabled early for a successful clock synchronization and
for few IVI platforms, clock need to be enabled at boot and should be ON
always.

Add the required structures and create set_dma_control ipc to enable or
disable the clock. To enable sclk without fs, mclk ipc structure is used,
else sclkfs ipc structure is used.

Clock prepare/unprepare are used to enable/disable the clock as the IPC
will be sent in non-atomic context. The clk set_dma_control IPC
structures are populated during the set_rate callback and IPC is sent
to enable the clock during prepare callback.

This patch creates virtual clock driver, which allows the machine driver
to use the clock interface to send IPCs to DSP to enable/disable the
clocks.
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

SND_SST_ATOM_HIFI2_PLATFORM_PCI select SND_SOC_INTEL_COMMON which do not
exists anymore.
So remove this select.

Fixes: c6059879 ("ASoC: Intel: Fix Kconfig with top-level selector")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The second assignment to res is identical to the previous assignment
so it is redundant and can be removed.

Cleans up clang warning:
sound/soc/intel/skylake/skl-topology.c:191:25: warning: Value stored to
'res' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Instead of home grown snd_soc_acpi_find_name_from_hid() use
acpi_dev_get_first_match_name().
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'topic/hdac-hdmi' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel

Remove hard-codec [16] array size, replace with clearer description and
dependency on ACPI_ID_LEN
No functionality change
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Same problem as with previous machine drivers, the codec dai
uses a hard-coded name of "i2c-ESSX8316:00" but ACPI provides
"i2c-ESSX8316:01" in some systems.

Fix by overriding the hard-coded value with the codec name derived
from the HID information

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189261Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'fix/intel' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel

Merge branch 'acpi-gpio' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into asoc-intel

This codec was used in MFLD systems in the PMIC chip, we no longer have
users for this, so remove it
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

mfld_machine was not getting compiled due to missed Makefile changes.
Since no one complained it is safe to assume that it is not being used,
so remove it
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The driver needs the pin control device name for ACPI.

We are looking through ACPI namespace and return first found device
based on ACPI HID for Intel Merrifield FLIS (pin control device).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Sometimes the user wants to have device name of the match rather than
just checking if device present or not. To make life easier for such
users introduce acpi_dev_get_first_match_name() helper based on code
for acpi_dev_present().

For example, GPIO driver for Intel Merrifield needs to know the device
name of pin control to be able to apply GPIO mapping table to the proper
device.

To be more consistent with the purpose rename

  struct acpi_dev_present_info  -> struct acpi_dev_match_info
  acpi_dev_present_cb()         -> acpi_dev_match_cb()

in the utils.c file.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Drop "Intel ASoC SST driver for " platforms and "SOC Machine Audio driver
for Intel" for machines..
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Help in finding matching "if" endings by commenting the "endif".
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

No reason why SND_SOC_INTEL_SST should be set here.
Also make sure same dependencies are used everywhere (only last one has SPI
in addition). Replace X86_INTEL_LPSS by MFD_INTEL_LPSS since the former
makes no sense for Skylake+ devices
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Make sure all the configs are aligned
Also add the missing dependencies on SOC_ACPI stuff used to fix
DAI names based on HID and fix a couple of indentation issues
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Make sure that the same I2C/I2C_DESIGNWARE_PLATFORM are selected.
The latter might actually need to be moved to the SOC side of things,
it really has no place in a machine driver dependency
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch fixes a number of issues:
1. IOSF_MBI is only needed for byt-cr detection, which is only supported
on Baytrail/Cherrytrail, move to HiFi2 config

2. SND_SOC_INTEL_SST should not select SND_SOC_INTEL_SST_ACPI, the latter
config is only valid for Haswell/Baytrail legacy but not needed by Skylake

3. SND_SST_IPC_ACPI, used only by the atom/sst driver, should not select
SND_SOC_INTEL_SST, none of the code under common/sst*.c is used

This nesting of configs really makes no sense, it's easier to maintain
if for each platform one can control what is strictly required.

Compiled-tested with each of Haswell, Baytrail legacy, HiFi2, SKL cases
selected independently. 0-day and explicit randconfig tests did not report
additional issues and no functionality loss was observed in Intel tests on
HIFI2 and SKYLAKE platforms
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Document in comments what the options are supposed to mean, before
clean-up in next patch.

No functionality change here.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

PCI/ACPI selections should not happen in Kconfig for machine drivers,
move to SOC selections.

Add distinction between PCI and ACPI HiFi2 platforms and help text.

There should be no functionality change.

The PCI-based platforms may be removed at some point since Medfield
is not really supported by anyone, and with Edison now defunct support for
Merrifield/Edison is to be determined.

The dependency on SND_DMA_SGBUF for Haswell is not clear at this
point and may have to be further updated.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Follow network example suggested by Linus, move Intel definitions
in if/endif block and clarify in help text which options distro
configurations should enable - everything except legacy Baytrail stuff and
NOCODEC (test only)

To avoid user confusion, machine drivers are handled with a submenu made
dependent on this top-level selector.

There should be no functionality change - except that sound capabilities
are restored when using older configs without any user selection.

Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered
out by the top-level selector. This will change in the near future to
allow for this option to be selected by both SST and SOF drivers

(simplification with submenu for machine drivers by Vinod Koul)

Fixes: f6a118a8 ("ASoC: Intel: clarify Kconfig dependencies")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add the DAPM widgets and routes.

Tested with MinnowMax Turbot + rt5651 eval board with Speaker
(LineOut) -> LineIn loopback

Thanks to Bard Liao @ Realtek for providing the 0dB settings

"IN Capture Volume" = 23
"ADC Capture Volume" = 47
"OUT Playback Volume" = 31
"DAC1 Playback Volume" = 175
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Define DMI quirk for rt5651 eval board connected to MinnowBoard
Turbot. The only difference with a MinnowBoard MAX is that the MCLK
pin is enabled on the LSE connector
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Keqiao.Zhang <Keqiao.zhang@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

On Minnowboard Max with Realtek rt5651 eval board, the IN3P is
connected to Headset Mic.

Here add and select it for Minnowboard Max.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The current code doesn't enable the MCLK which reduces audio quality
(PLL driven from BLCK), fix the quirk
Tested-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch fixes 3 small issues:
 - missing 2nd '*' at the beginning of a doxygen comment
 - extra space after a '\n' in a dev_dbg message
 - extra tab before a 'return" statement
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>

In some error handling paths, an error code is assiegned to 'ret'.
However, the function always return 0.

Fix it and return the error code if such an error paths is taken.

Fixes: 3d9ff346 ("ASoC: Intel: sst: add stream operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>

0-day reports compilation issues with non-ACPI platforms.

In file included from sound/soc/soc-acpi.c:17:0:
>> include/sound/soc-acpi.h:36:46: error: 'ACPI_ID_LEN' undeclared here
(not in a function); did you mean 'ACPI_FILE'?
    snd_soc_acpi_find_name_from_hid(const u8 hid[ACPI_ID_LEN])

 sound/soc/soc-acpi.c: At top level:
>> sound/soc/soc-acpi.c:174:16: error: expected declaration specifiers or
'...' before string constant
    MODULE_LICENSE("GPL v2");

Add missing include files.

Fixes: 7feb2f78 ("ASoC: move ACPI common code out of Intel/sst tree")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Replace snd_soc_acpi_check_hid() with the generic acpi_dev_present()
and remove the now unused snd_soc_acpi_check_hid function. This should
have no functional change.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'fix/intel' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel

The ACPI/machine-driver code refactoring introduced in 4.13 introduced
a regression for cases where we need a DMI-based quirk to select the
machine driver (the BIOS reports an invalid HID). The fix is just to
make sure the results of the quirk are actually used.

Fixes: 54746dab ('ASoC: Improve machine driver selection based on quirk data')
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691Tested-by: Nicole Færber <nicole.faerber@dpin.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

Pull parisc fixes from Helge Deller:

 - Many small fixes to show the real physical addresses of devices
   instead of hashed addresses.

 - One important fix to unbreak 32-bit SMP support: We forgot to 16-byte
   align the spinlocks in the assembler code.

 - Qemu support: The host will get a chance to sleep when the parisc
   guest is idle. We use the same mechanism as the power architecture by
   overlaying the "or %r10,%r10,%r10" instruction which is simply a nop
   on real hardware.

* 'parisc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: qemu idle sleep support
  parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernel
  parisc: Show unhashed EISA EEPROM address
  parisc: Show unhashed HPA of Dino chip
  parisc: Show initial kernel memory layout unhashed
  parisc: Show unhashed hardware inventory

Merge tag 'apparmor-pr-2018-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor fix from John Johansen:
 "This fixes a regression when the kernel feature set is reported as
  supporting mount and policy is pinned to a feature set that does not
  support mount mediation"

* tag 'apparmor-pr-2018-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: fix regression in mount mediation when feature set is pinned

Merge tag 'led_fixes_for_4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED fix from Jacek Anaszewski:
 "The commit 2b83ff96 for 4.15-rc6, which was fixing LED brightness
  setting after clearing delay_off broke the behavior on any alteration
  of delay_on{off} properties, due to use of a LED core helper that does
  too much for this particular case"

* tag 'led_fixes_for_4.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: core: Fix regression caused by commit 2b83ff96

Pull MTD bugfix from Richard Weinberger:
 "A single fix for the pxa3xx NAND driver"

* tag 'for-linus-20180107' of git://git.infradead.org/linux-mtd:
  mtd: nand: pxa3xx: Fix READOOB implementation

Commit 2b83ff96 ("led: core: Fix brightness setting when setting delay_off=0")
replaced del_timer_sync(&led_cdev->blink_timer) with led_stop_software_blink()
in led_blink_set(), which additionally clears LED_BLINK_SW flag as well as
zeroes blink_delay_on and blink_delay_off properties of the struct led_classdev.

Cleansing of the latter ones wasn't required to fix the original issue but
wasn't considered harmful. It nonetheless turned out to be so in case when
pointer to one or both props is passed to led_blink_set() like in the
ledtrig-timer.c. In such cases zeroes are passed later in delay_on and/or
delay_off arguments to led_blink_setup(), which results either in stopping
the software blinking or setting blinking frequency always to 1Hz.

Avoid using led_stop_software_blink() and add a single call required
to clear LED_BLINK_SW flag, which was the only needed modification to
fix the original issue.

Fixes 2b83ff96 ("led: core: Fix brightness setting when setting delay_off=0")
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>