Merge tag 'mac80211-for-davem-2019-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Just a few fixes:
 * revert NETIF_F_LLTX usage as it caused problems
 * avoid warning on WMM parameters from AP that are too short
 * fix possible null-ptr dereference in hwsim
 * fix interface combinations with 4-addr and crypto control
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree:

1) memleak in ebtables from the error path for the 32/64 compat layer,
   from Florian Westphal.

2) Fix inverted meta ifname/ifidx matching when no interface is set
   on either from the input/output path, from Phil Sutter.

3) Remove goto label in nft_meta_bridge, also from Phil.

4) Missing include guard in xt_connlabel, from Masahiro Yamada.

5) Two patch to fix ipset destination MAC matching coming from
   Stephano Brivio, via Jozsef Kadlecsik.

6) Fix set rename and listing concurrency problem, from Shijie Luo.
   Patch also coming via Jozsef Kadlecsik.

7) ebtables 32/64 compat missing base chain policy in rule count,
   from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need to use GFP_ATOMIC here, GFP_KERNEL should be enough.
The 'kcalloc()' just a few lines above, already uses GFP_KERNEL.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no good reason to use GFP_ATOMIC here. Other memory allocations
are performed with GFP_KERNEL (see other 'dma_alloc_coherent()' below and
'kzalloc()' in 'et131x_rx_dma_memory_alloc()')

Use GFP_KERNEL which should be enough.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: 6e43650c ("add maintainer for network drop monitor kernel service")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Two small fixes

Patch #1 from Jiri fixes the error path of the module initialization
function. Found during manual code inspection.

Patch #2 from Petr further reduces the default shared buffer pool sizes
in order to work around a problem that was originally described in
commit e891ce1d ("mlxsw: spectrum_buffers: Reduce pool size on
Spectrum-2").
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit e891ce1d ("mlxsw: spectrum_buffers: Reduce pool size on
Spectrum-2"), pool size was reduced to mitigate a problem in port buffer
usage of ports split four ways. It turns out that this work around does not
solve the issue, and a further reduction is required.

Thus reduce the size of pool 0 by another 2.7 MiB, and round down to the
whole number of cells.

Fixes: e891ce1d ("mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case of sp2 pci driver registration fail, fix the error path to
start with sp1 pci driver unregister.

Fixes: c3ab4354 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set phy device advertising to enable MAC flow control.
Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in
linux-2.5.69 along with hundreds of other commands, but was always broken
sincen only the structure is compatible, but the command number is not,
due to the size being sizeof(size_t), or at first sizeof(sizeof((struct
sockaddr_pppox)), which is different on 64-bit architectures.

Guillaume Nault adds:

  And the implementation was broken until 2016 (see 29e73269 ("pppoe:
  fix reference counting in PPPoE proxy")), and nobody ever noticed. I
  should probably have removed this ioctl entirely instead of fixing it.
  Clearly, it has never been used.

Fix it by adding a compat_ioctl handler for all pppoe variants that
translates the command number and then calls the regular ioctl function.

All other ioctl commands handled by pppoe are compatible between 32-bit
and 64-bit, and require compat_ptr() conversion.

This should apply to all stable kernels.
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Our test suite somtimes provokes the following crash:

Description of problem:
[ 1092.597234] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8
[ 1092.605072] PGD 0 P4D 0
[ 1092.607620] Oops: 0000 [#1] SMP PTI
[ 1092.611118] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Not tainted 4.18.0-122.el8.x86_64 #1
[ 1092.619724] Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 1.3.7 02/08/2018
[ 1092.627215] RIP: 0010:tipc_mcast_filter_msg+0x93/0x2d0 [tipc]
[ 1092.632955] Code: 0f 84 aa 01 00 00 89 cf 4d 01 ca 4c 8b 26 c1 ef 19 83 e7 0f 83 ff 0c 4d 0f 45 d1 41 8b 6a 10 0f cd 4c 39 e6 0f 84 81 01 00 00 <4d> 8b 9c 24 e8 00 00 00 45 8b 13 41 0f ca 44 89 d7 c1 ef 13 83 e7
[ 1092.651703] RSP: 0018:ffff929e5fa83a18 EFLAGS: 00010282
[ 1092.656927] RAX: ffff929e3fb38100 RBX: 00000000069f29ee RCX: 00000000416c0045
[ 1092.664058] RDX: ffff929e5fa83a88 RSI: ffff929e31a28420 RDI: 0000000000000000
[ 1092.671209] RBP: 0000000029b11821 R08: 0000000000000000 R09: ffff929e39b4407a
[ 1092.678343] R10: ffff929e39b4407a R11: 0000000000000007 R12: 0000000000000000
[ 1092.685475] R13: 0000000000000001 R14: ffff929e3fb38100 R15: ffff929e39b4407a
[ 1092.692614] FS:  0000000000000000(0000) GS:ffff929e5fa80000(0000) knlGS:0000000000000000
[ 1092.700702] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1092.706447] CR2: 00000000000000e8 CR3: 000000031300a004 CR4: 00000000007606e0
[ 1092.713579] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1092.720712] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1092.727843] PKRU: 55555554
[ 1092.730556] Call Trace:
[ 1092.733010]  <IRQ>
[ 1092.735034]  tipc_sk_filter_rcv+0x7ca/0xb80 [tipc]
[ 1092.739828]  ? __kmalloc_node_track_caller+0x1cb/0x290
[ 1092.744974]  ? dev_hard_start_xmit+0xa5/0x210
[ 1092.749332]  tipc_sk_rcv+0x389/0x640 [tipc]
[ 1092.753519]  tipc_sk_mcast_rcv+0x23c/0x3a0 [tipc]
[ 1092.758224]  tipc_rcv+0x57a/0xf20 [tipc]
[ 1092.762154]  ? ktime_get_real_ts64+0x40/0xe0
[ 1092.766432]  ? tpacket_rcv+0x50/0x9f0
[ 1092.770098]  tipc_l2_rcv_msg+0x4a/0x70 [tipc]
[ 1092.774452]  __netif_receive_skb_core+0xb62/0xbd0
[ 1092.779164]  ? enqueue_entity+0xf6/0x630
[ 1092.783084]  ? kmem_cache_alloc+0x158/0x1c0
[ 1092.787272]  ? __build_skb+0x25/0xd0
[ 1092.790849]  netif_receive_skb_internal+0x42/0xf0
[ 1092.795557]  napi_gro_receive+0xba/0xe0
[ 1092.799417]  mlx5e_handle_rx_cqe+0x83/0xd0 [mlx5_core]
[ 1092.804564]  mlx5e_poll_rx_cq+0xd5/0x920 [mlx5_core]
[ 1092.809536]  mlx5e_napi_poll+0xb2/0xce0 [mlx5_core]
[ 1092.814415]  ? __wake_up_common_lock+0x89/0xc0
[ 1092.818861]  net_rx_action+0x149/0x3b0
[ 1092.822616]  __do_softirq+0xe3/0x30a
[ 1092.826193]  irq_exit+0x100/0x110
[ 1092.829512]  do_IRQ+0x85/0xd0
[ 1092.832483]  common_interrupt+0xf/0xf
[ 1092.836147]  </IRQ>
[ 1092.838255] RIP: 0010:cpuidle_enter_state+0xb7/0x2a0
[ 1092.843221] Code: e8 3e 79 a5 ff 80 7c 24 03 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 d7 01 00 00 31 ff e8 a0 6b ab ff fb 66 0f 1f 44 00 00 <48> b8 ff ff ff ff f3 01 00 00 4c 29 f3 ba ff ff ff 7f 48 39 c3 7f
[ 1092.861967] RSP: 0018:ffffaa5ec6533e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd
[ 1092.869530] RAX: ffff929e5faa3100 RBX: 000000fe63dd2092 RCX: 000000000000001f
[ 1092.876665] RDX: 000000fe63dd2092 RSI: 000000003a518aaa RDI: 0000000000000000
[ 1092.883795] RBP: 0000000000000003 R08: 0000000000000004 R09: 0000000000022940
[ 1092.890929] R10: 0000040cb0666b56 R11: ffff929e5faa20a8 R12: ffff929e5faade78
[ 1092.898060] R13: ffffffffb59258f8 R14: 000000fe60f3228d R15: 0000000000000000
[ 1092.905196]  ? cpuidle_enter_state+0x92/0x2a0
[ 1092.909555]  do_idle+0x236/0x280
[ 1092.912785]  cpu_startup_entry+0x6f/0x80
[ 1092.916715]  start_secondary+0x1a7/0x200
[ 1092.920642]  secondary_startup_64+0xb7/0xc0
[...]

The reason is that the skb list tipc_socket::mc_method.deferredq only
is initialized for connectionless sockets, while nothing stops arriving
multicast messages from being filtered by connection oriented sockets,
with subsequent access to the said list.

We fix this by initializing the list unconditionally at socket creation.
This eliminates the crash, while the message still is dropped further
down in tipc_sk_filter_rcv() as it should be.
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
Here are a couple of fixes for rxrpc:

 (1) Fix a potential deadlock in the peer keepalive dispatcher.

 (2) Fix a missing notification when a UDP sendmsg error occurs in rxrpc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If PHYLIB is not set, build enetc will fails:

drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_open':
enetc.c: undefined reference to `phy_disconnect'
enetc.c: undefined reference to `phy_start'
drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_close':
enetc.c: undefined reference to `phy_stop'
enetc.c: undefined reference to `phy_disconnect'
drivers/net/ethernet/freescale/enetc/enetc_ethtool.o: undefined reference to `phy_ethtool_get_link_ksettings'
drivers/net/ethernet/freescale/enetc/enetc_ethtool.o: undefined reference to `phy_ethtool_set_link_ksettings'
drivers/net/ethernet/freescale/enetc/enetc_mdio.o: In function `enetc_mdio_probe':
enetc_mdio.c: undefined reference to `mdiobus_alloc_size'
enetc_mdio.c: undefined reference to `mdiobus_free'
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With recent changes that introduced support for Page Pool in stmmac, Jon
reported that NFS boot was no longer working on an ARM64 based platform
that had the IP behind an IOMMU.

As Page Pool API does not guarantee DMA syncing because of the use of
DMA_ATTR_SKIP_CPU_SYNC flag, we have to explicit sync the whole buffer upon
re-allocation because we are always re-using same pages.

In fact, ARM64 code invalidates the DMA area upon two situations [1]:
	- sync_single_for_cpu(): Invalidates if direction != DMA_TO_DEVICE
	- sync_single_for_device(): Invalidates if direction == DMA_FROM_DEVICE

So, as we must invalidate both the current RX buffer and the newly allocated
buffer we propose this fix.

[1] arch/arm64/mm/cache.S
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: 2af6106a ("net: stmmac: Introducing support for Page Pool")
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently are duplicated checks on orig_egr_types which are
redundant, I believe this is a typo and should actually be
orig_ing_types || orig_egr_types instead of the expression
orig_egr_types || orig_egr_types.  Fix these.

Addresses-Coverity: ("Same on both sides")
Fixes: c6b36bdd ("mlxsw: spectrum_ptp: Increase parsing depth when PTP is enabled")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using the define here makes the code more expressive.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is perfectly ok to not have an gpio attached to the fixed-link node. So
the driver should not throw an error message when the gpio is missing.

Fixes: 5468e82f ("net: phy: fixed-phy: Drop GPIO from fixed_phy_add()")
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the fact that a notification isn't sent to the recvmsg side to indicate
a call failed when sendmsg() fails to transmit a DATA packet with the error
ENETUNREACH, EHOSTUNREACH or ECONNREFUSED.

Without this notification, the afs client just sits there waiting for the
call to complete in some manner (which it's not now going to do), which
also pins the rxrpc call in place.

This can be seen if the client has a scope-level IPv6 address, but not a
global-level IPv6 address, and we try and transmit an operation to a
server's IPv6 address.

Looking in /proc/net/rxrpc/calls shows completed calls just sat there with
an abort code of RX_USER_ABORT and an error code of -ENETUNREACH.

Fixes: c54e43d7 ("rxrpc: Fix missing start of call timeout")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>

There is a potential deadlock in rxrpc_peer_keepalive_dispatch() whereby
rxrpc_put_peer() is called with the peer_hash_lock held, but if it reduces
the peer's refcount to 0, rxrpc_put_peer() calls __rxrpc_put_peer() - which
the tries to take the already held lock.

Fix this by providing a version of rxrpc_put_peer() that can be called in
situations where the lock is already held.

The bug may produce the following lockdep report:

============================================
WARNING: possible recursive locking detected
5.2.0-next-20190718 #41 Not tainted
--------------------------------------------
kworker/0:3/21678 is trying to acquire lock:
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh
/./include/linux/spinlock.h:343 [inline]
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at:
__rxrpc_put_peer /net/rxrpc/peer_object.c:415 [inline]
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at:
rxrpc_put_peer+0x2d3/0x6a0 /net/rxrpc/peer_object.c:435

but task is already holding lock:
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh
/./include/linux/spinlock.h:343 [inline]
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at:
rxrpc_peer_keepalive_dispatch /net/rxrpc/peer_event.c:378 [inline]
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at:
rxrpc_peer_keepalive_worker+0x6b3/0xd02 /net/rxrpc/peer_event.c:430

Fixes: 330bdcfa ("rxrpc: Fix the keepalive generator [ver #2]")
Reported-by: syzbot+72af434e4b3417318f84@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>

Revert this for now, it has been reported multiple times that it
completely breaks connectivity on various devices.

Cc: stable@vger.kernel.org
Fixes: 8dbb000e ("mac80211: set NETIF_F_LLTX when using intermediate tx queues")
Reported-by: Jean Delvare <jdelvare@suse.de>
Reported-by: Peter Lebbing <peter@digitalbrains.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Jozsef Kadlecsik says:

====================
ipset patches for the nf tree

- When the support of destination MAC addresses for hash:mac sets was
  introduced, it was forgotten to add the same functionality to hash:ip,mac
  types of sets. The patch from Stefano Brivio adds the missing part.
- When the support of destination MAC addresses for hash:mac sets was
  introduced, a copy&paste error was made in the code of the hash:ip,mac
  and bitmap:ip,mac types: the MAC address in these set types is in
  the second position and not in the first one. Stefano Brivio's patch
  fixes the issue.
- There was still a not properly handled concurrency handling issue
  between renaming and listing sets at the same time, reported by
  Shijie Luo.
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

ebtables doesn't include the base chain policies in the rule count,
so we need to add them manually when we call into the x_tables core
to allocate space for the comapt offset table.

This lead syzbot to trigger:
WARNING: CPU: 1 PID: 9012 at net/netfilter/x_tables.c:649
xt_compat_add_offset.cold+0x11/0x36 net/netfilter/x_tables.c:649

Reported-by: syzbot+276ddebab3382bbf72db@syzkaller.appspotmail.com
Fixes: 2035f3ff ("netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: arm):

drivers/net/ethernet/smsc/smc911x.c: In function ‘smc911x_phy_detect’:
drivers/net/ethernet/smsc/smc911x.c:677:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
    if (cfg & HW_CFG_EXT_PHY_DET_) {
       ^
drivers/net/ethernet/smsc/smc911x.c:715:3: note: here
   default:
   ^~~~~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: i386):

drivers/net/hamradio/baycom_epp.c: In function ‘transmit’:
drivers/net/hamradio/baycom_epp.c:491:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
    if (i) {
       ^
drivers/net/hamradio/baycom_epp.c:504:3: note: here
   default:  /* fall through */
   ^~~~~~~

Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: i386):

drivers/net/wan/sdla.c: In function ‘sdla_errors’:
drivers/net/wan/sdla.c:414:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
    if (cmd == SDLA_INFORMATION_WRITE)
       ^
drivers/net/wan/sdla.c:417:3: note: here
   default:
   ^~~~~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IS_ERR() already calls unlikely(), so this extra unlikely() call
around IS_ERR() is not needed.
Signed-off-by: Enrico Weigelt <info@metux.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Spectrum systems have a configurable limit on how far into the packet they
parse. By default, the limit is 96 bytes.

An IPv6 PTP packet is layered as Ethernet/IPv6/UDP (14+40+8 bytes), and
sequence ID of a PTP event is only available 32 bytes into payload, for a
total of 94 bytes. When an additional 802.1q header is present as
well (such as when ptp4l is running on a VLAN port), the parsing limit is
exceeded. Such packets are not recognized as PTP, and are not timestamped.

Therefore generalize the current VXLAN-specific parsing depth setting to
allow reference-counted requests from other modules as well. Keep it in the
VXLAN module, because the MPRS register also configures UDP destination
port number used for VXLAN, and is thus closely tied to the VXLAN code
anyway.

Then invoke the new interfaces from both VXLAN (in obvious places), as well
as from PTP code, when the (global) timestamping configuration changes from
disabled to enabled or vice versa.

Fixes: 87486427 ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shijie Luo reported that when stress-testing ipset with multiple concurrent
create, rename, flush, list, destroy commands, it can result

ipset <version>: Broken LIST kernel message: missing DATA part!

error messages and broken list results. The problem was the rename operation
was not properly handled with respect of listing. The patch fixes the issue.
Reported-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>

In commit 8cc4ccf5 ("ipset: Allow matching on destination MAC address
for mac and ipmac sets"), ipset.git commit 1543514c46a7, I added to the
KADT functions for sets matching on MAC addreses the copy of source or
destination MAC address depending on the configured match.

This was done correctly for hash:mac, but for hash:ip,mac and
bitmap:ip,mac, copying and pasting the same code block presents an
obvious problem: in these two set types, the MAC address is the second
dimension, not the first one, and we are actually selecting the MAC
address depending on whether the first dimension (IP address) specifies
source or destination.

Fix this by checking for the IPSET_DIM_TWO_SRC flag in option flags.

This way, mixing source and destination matches for the two dimensions
of ip,mac set types works as expected. With this setup:

  ip netns add A
  ip link add veth1 type veth peer name veth2 netns A
  ip addr add 192.0.2.1/24 dev veth1
  ip -net A addr add 192.0.2.2/24 dev veth2
  ip link set veth1 up
  ip -net A link set veth2 up

  dst=$(ip netns exec A cat /sys/class/net/veth2/address)

  ip netns exec A ipset create test_bitmap bitmap:ip,mac range 192.0.0.0/16
  ip netns exec A ipset add test_bitmap 192.0.2.1,${dst}
  ip netns exec A iptables -A INPUT -m set ! --match-set test_bitmap src,dst -j DROP

  ip netns exec A ipset create test_hash hash:ip,mac
  ip netns exec A ipset add test_hash 192.0.2.1,${dst}
  ip netns exec A iptables -A INPUT -m set ! --match-set test_hash src,dst -j DROP

ipset correctly matches a test packet:

  # ping -c1 192.0.2.2 >/dev/null
  # echo $?
  0
Reported-by: Chen Yi <yiche@redhat.com>
Fixes: 8cc4ccf5 ("ipset: Allow matching on destination MAC address for mac and ipmac sets")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>

In commit 8cc4ccf5 ("ipset: Allow matching on destination MAC address
for mac and ipmac sets"), ipset.git commit 1543514c46a7, I removed the
KADT check that prevents matching on destination MAC addresses for
hash:mac sets, but forgot to remove the same check for hash:ip,mac set.

Drop this check: functionality is now commented in man pages and there's
no reason to restrict to source MAC address matching anymore.
Reported-by: Chen Yi <yiche@redhat.com>
Fixes: 8cc4ccf5 ("ipset: Allow matching on destination MAC address for mac and ipmac sets")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/net/ethernet/toshiba/spider_net.c: In function 'spider_net_release_tx_chain':
drivers/net/ethernet/toshiba/spider_net.c:783:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
    if (!brutal) {
       ^
drivers/net/ethernet/toshiba/spider_net.c:792:3: note: here
   case SPIDER_NET_DESCR_RESPONSE_ERROR:
   ^~~~

Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/net/ethernet/ibm/ehea/ehea_main.c: In function 'ehea_mem_notifier':
include/linux/printk.h:311:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
  printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/ibm/ehea/ehea_main.c:3253:3: note: in expansion of macro 'pr_info'
   pr_info("memory offlining canceled");
   ^~~~~~~
drivers/net/ethernet/ibm/ehea/ehea_main.c:3256:2: note: here
  case MEM_ONLINE:
  ^~~~

Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hardware can only offload checksum calculation on first port due to
the Tx FIFO size limitation, and has a maximum L3 offset of 128 bytes.
Document this in a comment and move duplicated code in a function.

Fixes: 576193f2 ("net: mvpp2: jumbo frames support")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit aca51397 ("netns: Fix arbitrary net_device-s corruptions
on net_ns stop.") introduced a possibility to hit a BUG in case device
is returning back to init_net and two following conditions are met:
1) dev->ifindex value is used in a name of another "dev%d"
   device in init_net.
2) dev->name is used by another device in init_net.

Under real life circumstances this is hard to get. Therefore this has
been present happily for over 10 years. To reproduce:

$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff
3: enp0s2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
$ ip netns add ns1
$ ip -n ns1 link add dummy1ns1 type dummy
$ ip -n ns1 link add dummy2ns1 type dummy
$ ip link set enp0s2 netns ns1
$ ip -n ns1 link set enp0s2 name dummy0
[  100.858894] virtio_net virtio0 dummy0: renamed from enp0s2
$ ip link add dev4 type dummy
$ ip -n ns1 a
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy1ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 16:63:4c:38:3e:ff brd ff:ff:ff:ff:ff:ff
3: dummy2ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether aa:9e:86:dd:6b:5d brd ff:ff:ff:ff:ff:ff
4: dummy0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff
4: dev4: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 5a:e1:4a:b6:ec:f8 brd ff:ff:ff:ff:ff:ff
$ ip netns del ns1
[  158.717795] default_device_exit: failed to move dummy0 to init_net: -17
[  158.719316] ------------[ cut here ]------------
[  158.720591] kernel BUG at net/core/dev.c:9824!
[  158.722260] invalid opcode: 0000 [#1] SMP KASAN PTI
[  158.723728] CPU: 0 PID: 56 Comm: kworker/u2:1 Not tainted 5.3.0-rc1+ #18
[  158.725422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
[  158.727508] Workqueue: netns cleanup_net
[  158.728915] RIP: 0010:default_device_exit.cold+0x1d/0x1f
[  158.730683] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e
[  158.736854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282
[  158.738752] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000
[  158.741369] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64
[  158.743418] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c
[  158.745626] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000
[  158.748405] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72
[  158.750638] FS:  0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000
[  158.752944] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  158.755245] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0
[  158.757654] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  158.760012] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  158.762758] Call Trace:
[  158.763882]  ? dev_change_net_namespace+0xbb0/0xbb0
[  158.766148]  ? devlink_nl_cmd_set_doit+0x520/0x520
[  158.768034]  ? dev_change_net_namespace+0xbb0/0xbb0
[  158.769870]  ops_exit_list.isra.0+0xa8/0x150
[  158.771544]  cleanup_net+0x446/0x8f0
[  158.772945]  ? unregister_pernet_operations+0x4a0/0x4a0
[  158.775294]  process_one_work+0xa1a/0x1740
[  158.776896]  ? pwq_dec_nr_in_flight+0x310/0x310
[  158.779143]  ? do_raw_spin_lock+0x11b/0x280
[  158.780848]  worker_thread+0x9e/0x1060
[  158.782500]  ? process_one_work+0x1740/0x1740
[  158.784454]  kthread+0x31b/0x420
[  158.786082]  ? __kthread_create_on_node+0x3f0/0x3f0
[  158.788286]  ret_from_fork+0x3a/0x50
[  158.789871] ---[ end trace defd6c657c71f936 ]---
[  158.792273] RIP: 0010:default_device_exit.cold+0x1d/0x1f
[  158.795478] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e
[  158.804854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282
[  158.807865] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000
[  158.811794] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64
[  158.816652] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c
[  158.820930] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000
[  158.825113] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72
[  158.829899] FS:  0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000
[  158.834923] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  158.838164] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0
[  158.841917] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  158.845149] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fix this by checking if a device with the same name exists in init_net
and fallback to original code - dev%d to allocate name - in case it does.

This was found using syzkaller.

Fixes: aca51397 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MTU change code can call napi_disable() with the device already down,
leading to a deadlock. Also, lot of code is duplicated unnecessarily.

Rework mvpp2_change_mtu() to avoid the deadlock and remove duplicated code.

Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently there are two error return paths that leak memory allocated
to fib_work. Fix this by kfree'ing fib_work before returning.

Addresses-Coverity: ("Resource leak")
Fixes: 19a9d136 ("ipv4: Flag fib_info with a fib_nh using IPv6 gateway")
Fixes: dbcc4fa7 ("rocker: Fail attempts to use routes with nexthop objects")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit d01f449c ("of_net: add NVMEM support to of_get_mac_address")
added support for reading the MAC address from an nvmem-cell. This
required changing the logic to return an error pointer upon failure.

If stmmac is loaded before the nvmem provider driver then
of_get_mac_address() return an error pointer with -EPROBE_DEFER.

Propagate this error so the stmmac driver will be probed again after the
nvmem provider driver is loaded.
Default to a random generated MAC address in case of any other error,
instead of using the error pointer as MAC address.

Fixes: d01f449c ("of_net: add NVMEM support to of_get_mac_address")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings:

net/iucv/af_iucv.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]:  => 537:3, 519:6, 2246:6, 510:6

Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings:

drivers/net/arcnet/com20020-isa.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]:  => 205:13, 203:10, 209:7, 201:11,
207:8
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

On initialization failure we have to delete the local fdb which was
inserted due to the default pvid creation. This problem has been present
since the inception of default_pvid. Note that currently there are 2 cases:
1) in br_dev_init() when br_multicast_init() fails
2) if register_netdevice() fails after calling ndo_init()

This patch takes care of both since br_vlan_flush() is called on both
occasions. Also the new fdb delete would be a no-op on normal bridge
device destruction since the local fdb would've been already flushed by
br_dev_delete(). This is not an issue for ports since nbp_vlan_init() is
called last when adding a port thus nothing can fail after it.

Reported-by: syzbot+88533dc8b582309bf3ee@syzkaller.appspotmail.com
Fixes: 5be5a2df ("bridge: Add filtering support for default_pvid")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>