- 15 Nov, 2021 40 commits
-
-
Mauro Carvalho Chehab authored
If something gets wrong while setup a pipeline, return an error code. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
Propagate the lower lever ia_css config errors to the next level. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
The auto-generated code inside ia_css_isp_configs() is more complex than it should be. Also, it doesn't return any errors. However, the functions called by it can mis-configure the pipelines, but, as there's no way to return errors, it internally calls the assert() macro. So, add a return parameter to each routine there, in order to prepare the code to be more robust. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
The contents of ia_css_isp_params.c is almost identical for 2400 and 2401. The only difference is that, on 2400, there are some duplicated assignments. So, drop it, unifying this file. While here, simplify the Makefile's logic by dropping an unused define. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
Both 2400 and 2401 have this file, but they're identical. So, drop one of them. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
Both 2400 and 2401 have this file, but they're identical. So, drop one of them. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
This avoids an OOPS when VIDIOC_*_PRIORITY calls are used. [ 90.820011] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 90.820021] #PF: supervisor read access in kernel mode [ 90.820026] #PF: error_code(0x0000) - not-present page [ 90.820030] PGD 1221bc067 P4D 1221bc067 PUD 1221bd067 PMD 0 [ 90.820042] Oops: 0000 [#1] SMP [ 90.820048] CPU: 0 PID: 2007 Comm: qv4l2 Tainted: G C 5.15.0-rc4+ #77 [ 90.820055] Hardware name: ASUSTeK COMPUTER INC. T101HA/T101HA, BIOS T101HA.306 04/23/2019 [ 90.820059] RIP: 0010:v4l2_prio_change+0xf/0x40 [videodev] [ 90.820096] Code: 48 8b 47 20 8b 40 44 25 ff ff 0f 00 48 8b 04 c5 20 58 44 c0 c3 66 0f 1f 44 00 00 0f 1f 44 00 00 8d 42 ff 83 f8 02 77 21 31 c0 <39> 16 74 20 8d 02 f0 ff 04 87 8b 06 89 c1 83 e9 01 83 f9 02 77 04 [ 90.820103] RSP: 0018:ffffb348c142fd70 EFLAGS: 00010246 [ 90.820109] RAX: 0000000000000000 RBX: ffff95575fbe2760 RCX: ffffb348c142fe48 [ 90.820114] RDX: 0000000000000002 RSI: 0000000000000020 RDI: ffff955740996088 [ 90.820118] RBP: 0000000040045644 R08: ffffffffc070da80 R09: 0000000000004000 [ 90.820122] R10: 0000000000000000 R11: 0000000000000000 R12: ffff955766725300 [ 90.820126] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000044 [ 90.820131] FS: 00007f848526b900(0000) GS:ffff9557bbe00000(0000) knlGS:0000000000000000 [ 90.820137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 90.820141] CR2: 0000000000000020 CR3: 00000001221bf000 CR4: 00000000001006f0 [ 90.820146] Call Trace: [ 90.820155] __video_do_ioctl+0x37d/0x3b0 [videodev] [ 90.820189] video_usercopy+0x188/0x7a0 [videodev] [ 90.820218] ? v4l_print_control+0x20/0x20 [videodev] [ 90.820247] ? swake_up_one+0x39/0x70 [ 90.820258] ? rcu_core+0xff/0x2e0 [ 90.820267] ? sched_clock_cpu+0x9/0xa0 [ 90.820275] ? irqtime_account_irq+0x38/0xb0 [ 90.820282] v4l2_ioctl+0x46/0x50 [videodev] Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
Instead of reinventing the wheel, use v4l2_find_nearest_size() in order to get the closest resolution. This should address a bug where the wrong resolution was selected. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
Instead of reinventing the wheel, use v4l2_find_nearest_size() in order to get the closest resolution. This should address a bug where the wrong resolution was selected. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
Instead of reinventing the wheel, use v4l2_find_nearest_size() in order to get the closest resolution. This should address a bug where the wrong resolution was selected. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
Instead of reinventing the wheel, use v4l2_find_nearest_size() in order to get the closest resolution. This should address a bug where the wrong resolution was selected. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
Instead of reinventing the wheel, use v4l2_find_nearest_size() in order to get the closest resolution. This should address a bug where the wrong resolution was selected. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
The g_fmt logic is currently broken, as it is not returning the same imagesize as previoulsy calculated by s_fmt. Fix it by just re-using whatever it was defined at s_fmt, if this was called before. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
The internal try_fmt logic is not meant to provide everything that the V4L2 API should provide. Also, it doesn't decrement the pads that are used only internally by the driver, but aren't part of the device's output. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
move atomisp_g_fmt_cap() for it to be after try_fmt, as we'll re-use try_fmt there. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
Currently, the enum lists the sensor's native format as a supported format. However, trying to setup a pipeline using it doesn't work. So, exclude such formats from the enum. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
There are several issues on S_FMT implementation: - it doesn't properly handle pad_h/pad_w; - it reports a wrong visible size to userspace; - it allows setting the format to a raw mode, which currently causes the pipeline to break. Address such issues, for it to start working with generic apps. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
The sensor width/height report is alread being printed after its calculus. The only reason for an extra debug printk is when dis is used. So, change its message to reflect and move it to be inside the if checks. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
Repeat the same round logic used inside s_fmt here, for the sake of sanity. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
Now that this driver starting to show signals of real progress, let's update its TODO list. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
The switch() logic there misses a break and a default case. That makes it more prone to problems as the code change. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Niklas Söderlund authored
Add basic support for Maxim MAX96712 quad GMSL2 deserializers. The driver is capable of powering on the device and configuring the MIPI CSI-2 bus in a DPHY 4-lane configuration as well as operating the internal VTG (Video Timing Generator) and VPG (Video Pattern Generator). Using these features the driver is able to act as a 1080p @ 30 fps V4L2 video source. Producing either a checkerboard or gradient pattern on the CSI-2 bus, selectable thru a V4L2 control. While the driver is useful as-is and have been used to prove the correct operation of the MAX96712 itself and "downstream" devices using the MAX96712 as a video source there are a lot of features missing. Most notably the ability to operate the GMSL bus. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
This is already disabled on some parts of the code, and trying to use it with current firmware causes an error: [ 53.799946] atomisp-isp2 0000:00:03.0: can't create streams [ 53.799962] atomisp-isp2 0000:00:03.0: __get_frame_info 1600x900 (padded to 0) returned -22 So, completely disable reporting it. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
The atomisp sensors and logic adds an extra pad lines/columns, called "dvs envelope". It also uses an extra 12 lines/columns at the sensor for BYT. As those are not visible to userspace, the V4L2 API should decrement such values when reporting the current resolution. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
The bayer formats aren't currently available for userspace to select: those are marked as IA_CSS_FRAME_FORMAT_RAW and trying to get them result on binary firmware load errors: [74625.258097] atomisp-isp2 0000:00:03.0: Using binary isp_preview_var_isp2 (id 22), type 0, mode 1, continuous true [74625.258146] atomisp-isp2 0000:00:03.0: Seeking for binary failed at: [74625.258161] CPU: 3 PID: 2792 Comm: v4l2grab Tainted: G C 5.15.0-rc4+ #77 [74625.258190] Hardware name: ASUSTeK COMPUTER INC. T101HA/T101HA, BIOS T101HA.306 04/23/2019 [74625.258208] Call Trace: [74625.258231] dump_stack_lvl+0x46/0x5a [74625.258272] ia_css_binary_find+0xa7d/0xcf0 [atomisp] [74625.258570] load_preview_binaries+0x323/0x3c0 [atomisp] ... [74625.265892] atomisp-isp2 0000:00:03.0: can't create streams [74625.265937] atomisp-isp2 0000:00:03.0: __get_frame_info 1604x1200 (padded to 0) returned -22 [74625.265962] atomisp-isp2 0000:00:03.0: Can't set format on ISP. Error -22 As those formats are ignored by purpose, it doesn't make any sense to print a message like: atomisp_enum_fmt_cap(): format for code 3007 not found. for those. Yet, some day it would be interesting to also report the bayer formats, letting userspace to decode them on a different way. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
While different sensors could have different colorspaces, the colorspace V4L2 support didn't exist by the time atomisp driver was written. So, the sensors won't have any data about that. So, let's report what Asus T101HA uses (ov2680 sensor). It may require further changes, if other sensors used on this driver have different colorspaces. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
The current logic only initializes pipe->pix after setting up a pipeline - e. g. after start streaming. While it makes sense to get the format of the pipeline, when it is set, this breaks support for generic applications, as they rely on getting the current sensor format (which is usually the highest resolution format). So, implement a call to the sensor's get_fmt, when this is called before setting up a pipeline. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
When atomisp is used by a normal client, it fails to get frame info. However, the information is confusing and misleading, as there are several wrappers for such function, and the error could be on different places. So, improve the error log in order to allow narrowing down where the error is actually occuring. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
Changeset 374d62e7 ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument") added an extra verification for a pads parameter for enum mbus format code. Such change broke atomisp, because now the V4L2 core refuses to enum MBUS formats if the state is empty. So, add .which field in order to select the active formats, in order to make it work again. While here, improve error messages. Fixes: 374d62e7 ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Tsuchiya Yuto authored
This is almost a BUG report with RFC patch that just avoids kernel oopses. Thus, prefixed with [BUG][RFC]. Here is the kernel log after running `v4l2-compliance -d /dev/video4` with this patch applied: kern :err : [25507.580392] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible) kern :warn : [25507.592343] isys dma store at addr(0xcd408) val(0) kern :err : [25507.592995] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.593685] atomisp-isp2 0000:00:03.0: atomisp_g_input(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.593719] atomisp-isp2 0000:00:03.0: atomisp_g_parm(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.593727] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC [omitting 42 same messages] kern :err : [25507.593976] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.594191] atomisp-isp2 0000:00:03.0: atomisp_g_input(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.594449] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC [omitting 43 same messages] kern :err : [25507.594756] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.594779] atomisp-isp2 0000:00:03.0: atomisp_g_ctrl(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.594787] atomisp-isp2 0000:00:03.0: atomisp_s_ctrl(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.594803] atomisp-isp2 0000:00:03.0: atomisp_camera_g_ext_ctrls(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.594880] atomisp-isp2 0000:00:03.0: atomisp_enum_fmt_cap(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.594915] atomisp-isp2 0000:00:03.0: atomisp_g_parm(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.595058] atomisp-isp2 0000:00:03.0: atomisp_try_fmt(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.595089] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.595124] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.595221] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.595241] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.601571] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible) kern :warn : [25507.607496] isys dma store at addr(0xcd408) val(0) kern :err : [25507.608604] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.611988] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible) kern :warn : [25507.617420] isys dma store at addr(0xcd408) val(0) kern :err : [25507.618429] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.618811] atomisp-isp2 0000:00:03.0: atomisp_g_parm(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.622193] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible) kern :warn : [25507.627355] isys dma store at addr(0xcd408) val(0) kern :err : [25507.628391] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.631143] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible) kern :warn : [25507.635813] isys dma store at addr(0xcd408) val(0) kern :err : [25507.636489] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.636504] atomisp-isp2 0000:00:03.0: atomisp_s_input(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.636516] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.639111] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible) kern :warn : [25507.646152] isys dma store at addr(0xcd408) val(0) kern :err : [25507.646831] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.646847] atomisp-isp2 0000:00:03.0: atomisp_s_input(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.650079] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible) kern :warn : [25507.657476] isys dma store at addr(0xcd408) val(0) kern :err : [25507.658741] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.658759] atomisp-isp2 0000:00:03.0: atomisp_s_input(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.658771] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC kern :err : [25507.660959] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible) kern :warn : [25507.666665] isys dma store at addr(0xcd408) val(0) kern :err : [25507.667397] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC [mchehab: fix coding style] Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Alan authored
Date: Mon, 06 Nov 2017 23:36:36 +0000 This isn't the ideal final solution but it stops the main problem for now where an open (often from udev) races the device initialization and we try and load the firmware twice at the same time. This needless to say doesn't usually end well. [kitakar: ported to upstream Kernel] [mchehab: make comments to use our coding style] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Tsuchiya Yuto authored
Microsoft Surface 3 does not describe CsiPort/CsiLanes in DSDT [1] or EFI, or at least not desctibed in the forms the current atomisp driver expects. This results in the default values (port: 0 lanes: 1) to be used, which does not work. So, define them ourselves in the driver. The user-facing camera is AR0330 (2-lane) and the world-facing camera is OV8835 (4-lane). According to the portconfigs definition in atomisp_csi_lane_config() [atomisp_v4l2.c]: } portconfigs[] = { /* Tangier/Merrifield available lane configurations */ { 0x00, { 4, 1, 0 } }, /* 00000 */ { 0x01, { 3, 1, 0 } }, /* 00001 */ { 0x02, { 2, 1, 0 } }, /* 00010 */ { 0x03, { 1, 1, 0 } }, /* 00011 */ { 0x04, { 2, 1, 2 } }, /* 00100 */ { 0x08, { 3, 1, 1 } }, /* 01000 */ { 0x09, { 2, 1, 1 } }, /* 01001 */ { 0x0a, { 1, 1, 1 } }, /* 01010 */ /* Anniedale/Moorefield only configurations */ { 0x10, { 4, 2, 0 } }, /* 10000 */ { 0x11, { 3, 2, 0 } }, /* 10001 */ { 0x12, { 2, 2, 0 } }, /* 10010 */ { 0x13, { 1, 2, 0 } }, /* 10011 */ { 0x14, { 2, 2, 2 } }, /* 10100 */ { 0x18, { 3, 2, 1 } }, /* 11000 */ { 0x19, { 2, 2, 1 } }, /* 11001 */ { 0x1a, { 1, 2, 1 } }, /* 11010 */ }; 4-lane camera is always connected to the PRIMARY (port1) port [2]. In this case, 2-lane camera can be connected to the only SECONDARY (port0) port. So, add these data accordingly as the gmin_cfg_var ACPI variables for Surface 3. [1] https://github.com/linux-surface/acpidumps/blob/7da48a392b4085c2021952290def1fc28505a643/surface_3/dsdt.dsl#L5879-L6278 [2] Yes, the PRIMARY port is port1 according to atomisp_camera_port [atomisp.h]: enum atomisp_camera_port { ATOMISP_CAMERA_PORT_SECONDARY, ATOMISP_CAMERA_PORT_PRIMARY, ATOMISP_CAMERA_PORT_TERTIARY, ATOMISP_CAMERA_NR_PORTS }; Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Tsuchiya Yuto authored
Now that we made atomisp work with firmware version irci_stable_candrpv_0415_20150521_0458 also for ISP2401, the release_version for ISP2401 is not irci_ecr-master_20150911_0724 anymore. So, use the same release_version for both ISP2400 and ISP2401 (i.e., irci_stable_candrpv_0415_20150521_0458). Referred to the following diff to make this patch: - https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/drivers/staging/media/atomisp/pci/sh_css_firmware.c?id=3c0538fbad9f1d07d588f631e380256d941e3d3a ("media: atomisp: get rid of most checks for ISP2401 version") changes for file sh_css_firmware.c Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Tsuchiya Yuto authored
This patch removes the unnamed struct `shading` from `struct sh_css_sp_pipeline` as well as its usage [1]. [1] added on updating css version to irci_master_20150701_0213 https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch ("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213") This patch, together with the 4 patches applied before it revert incompatible changes in the current css version for ISP2401 (irci_ecr-master_20150911_0724) back to irci_stable_candrpv_0415_20150521_0458. Some `struct`s are `sizeof()`ed in sh_css_firmware.c file. So, I guess issues will happen if these sizes are changed. Therefore, keep them the same as css version irci_stable_candrpv_0415_20150521_0458 to make atomisp work for firmware made for such css version since we don't have firmware made for the current css version. Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Tsuchiya Yuto authored
This patch removes polling_mode and subscr_index from `struct virtual_input_system_stream_s` as well as its usage [1]. Note that for subscr_index, only the definition were removed because it was not used anywhere. [1] added on updating css version to irci_master_20150701_0213 https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch ("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213") Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Tsuchiya Yuto authored
This patch removes `struct ia_css_isp_parameter xnr3` from `struct ia_css_memory_offsets` as well as its usage [1]. [1] added on updating css version to irci_master_20150701_0213 https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch ("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213") Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Tsuchiya Yuto authored
This patch removes `struct ia_css_isp_parameter sc` from `struct ia_css_config_memory_offsets` as well as its usage [1]. [1] added on updating css version to irci_master_20150701_0213 https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch ("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213") Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Tsuchiya Yuto authored
This patch removes luma_only, input_yuv and input_raw from `struct ia_css_binary_info` as well as its usage [1]. Note that for input_yuv and input_raw, only the definitions were removed because these were not used anywhere. [1] added on updating css version to irci_master_20150701_0213 https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch ("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213") Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Tsuchiya Yuto authored
## `if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_TPG) {` case The intel-aero atomisp has `#if defined(IS_ISP_2400_SYSTEM)` [1]. It is to be defined in the following two places [2]: - css/hive_isp_css_common/system_global.h - css/css_2401_csi2p_system/system_global.h and the former file is to be included on ISP2400 devices, too. So, it is to be defined for both ISP2400 and ISP2401 devices. Because the upstreamed atomisp driver now supports only ISP2400 and ISP2401, just remove the ISP version test again. This matches the other upstream commits like 3c0538fb ("media: atomisp: get rid of most checks for ISP2401 version"). While here, moved the comment for define GP_ISEL_TPG_MODE to the appropriate place. [1] https://github.com/intel-aero/linux-kernel/blob/a1b673258feb915268377275130c5c5df0eafc82/drivers/media/pci/atomisp/css/sh_css.c#L552-L558 [2] https://github.com/intel-aero/linux-kernel/search?q=IS_ISP_2400_SYSTEM ## `isys_stream_descr->polling_mode` case This does not exist on the intel-aero atomisp. This is because it is based on css version irci_stable_candrpv_0415_20150521_0458. On the other hand, the upstreamed atomisp is based on the following css version depending on the ISP version using ifdefs: - ISP2400: irci_stable_candrpv_0415_20150521_0458 - ISP2401: irci_master_20150911_0724 The `isys_stream_descr->polling_mode` usage was added on updating css version to irci_master_20150701_0213 [3]. So, it is not a ISP version specific thing, but css version specific thing. Because the upstreamed atomisp driver uses irci_master_20150911_0724 for ISP2401, re-add the ISP version check for now. I say "for now" because ISP2401 should eventually use the same css version with ISP2400 (i.e., irci_stable_candrpv_0415_20150521_0458) [3] https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch ("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213") Link to Intel's Android kernel patch. ## `coord = &me->config.internal_frame_origin_bqs_on_sctbl;` case it was added on commit 4f744a57 ("media: atomisp: make sh_css_sp_init_pipeline() ISP version independent") for ISP2401. Because the upstreamed atomisp for the ISP2401 part is based on irci_master_20150911_0724, hence the difference. Because the upstreamed atomisp driver uses irci_master_20150911_0724 for ISP2401, revert the test back to `if (IS_ISP2401)`. Fixes: 27333dad ("media: atomisp: adjust some code at sh_css that could be broken") Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Tsuchiya Yuto authored
Some debug messages for error cases (messages contain "error: ") use IA_CSS_DEBUG_TRACE_PRIVATE debug level. This causes these error messages not to appear unless users raise debug output level to 7 or higher (using module parameter, dbg_level=7). So, use IA_CSS_DEBUG_ERROR debug level (dbg_level=1) instead considering that these are error messages. There is already a macro IA_CSS_ERROR() for this use case. Let's use it. It automatically appends "error: " at the beginning and a newline to a message. Therefore, we can remove them from these messages. While here, remove the unnecessary newline from one IA_CSS_ERROR() occurrence in the same file. Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-