- 05 Mar, 2024 6 commits
-
-
Jani Nikula authored
Add kconfig to enable -Werror subsystem wide. This is useful for development and CI to keep the subsystem warning free, while avoiding issues outside of the subsystem that kernel wide CONFIG_WERROR=y might hit. v2: Don't depend on COMPILE_TEST Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> # v1 Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/afe5ed943414f7ec3044c1547503b9941686a867.1709629403.git.jani.nikula@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Jani Nikula authored
At least the i915 and amd drivers enable a bunch more compiler warnings than the kernel defaults. Extend most of the W=1 warnings to the entire drm subsystem by default. Use the copy-pasted warnings from scripts/Makefile.extrawarn with s/KBUILD_CFLAGS/subdir-ccflags-y/ to make it easier to compare and keep up with them in the future. This is similar to the approach currently used in i915. Some of the -Wextra warnings do need to be disabled, just like in Makefile.extrawarn, but take care to not disable them for W=2 or W=3 builds, depending on the warning. There are too many -Wformat-truncation warnings to cleanly fix up front; leave that warning disabled for now. v3: - Drop -Wmissing-declarations (already enabled by default) - Drop -Wmissing-prototypes (already enabled by default) v2: - Drop -Wformat-truncation (too many warnings) - Drop -Wstringop-overflow (already enabled by default) Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Pan Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sean Paul <sean@poorly.run> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Sui Jingfeng <sui.jingfeng@linux.dev> Acked-by:
Danilo Krummrich <dakr@redhat.com> Acked-by:
-
Karol Herbst authored
Those are already de-facto UAPI, so let's just move it into the uapi header. Signed-off-by:
Karol Herbst <kherbst@redhat.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
-
Jagan Teki authored
In order to satisfy the MIPI DSI initialization sequence the bridge init order has been altered with the help of pre_enable_prev_first in pre_enable and post_disable bridge operations. Document the affected bridge init order with an example on the bridge operations helpers. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Reviewed-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230328170752.1102347-2-jagan@amarulasolutions.com
-
Jagan Teki authored
For a given bridge pipeline if any bridge sets pre_enable_prev_first flag then the pre_enable for the previous bridge will be called before pre_enable of this bridge and opposite is done for post_disable. These are the potential bridge flags to alter bridge init order in order to satisfy the MIPI DSI host and downstream panel or bridge to function. However the existing pre_enable_prev_first logic with associated bridge ordering has broken for both pre_enable and post_disable calls. [pre_enable] The altered bridge ordering has failed if two consecutive bridges on a given pipeline enables the pre_enable_prev_first flag. Example: - Panel - Bridge 1 - Bridge 2 pre_enable_prev_first - Bridge 3 - Bridge 4 pre_enable_prev_first - Bridge 5 pre_enable_prev_first - Bridge 6 - Encoder In this example, Bridge 4 and Bridge 5 have pre_enable_prev_first. The logic looks for a bridge which enabled pre_enable_prev_first flag on each iteration and assigned the previou bridge to limit pointer if the bridge doesn't enable pre_enable_prev_first flags. If control found Bridge 2 is pre_enable_prev_first then the iteration looks for Bridge 3 and found it is not pre_enable_prev_first and assigns it's previous Bridge 4 to limit pointer and calls pre_enable of Bridge 3 and Bridge 2 and assign iter pointer with limit which is Bridge 4. Here is the actual problem, for the next iteration control look for Bridge 5 instead of Bridge 4 has iter pointer in previous iteration moved to Bridge 4 so this iteration skips the Bridge 4. The iteration found Bridge 6 doesn't pre_enable_prev_first flags so the limit assigned to Encoder. From next iteration Encoder skips as it is the last bridge for reverse order pipeline. So, the resulting pre_enable bridge order would be, - Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5. This patch fixes this by assigning limit to next pointer instead of previous bridge since the iteration always looks for bridge that does NOT request prev so assigning next makes sure the last bridge on a given iteration what exactly the limit bridge is. So, the resulting pre_enable bridge order with fix would be, - Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5, Bridge 4, Encoder. [post_disable] The altered bridge ordering has failed if two consecutive bridges on a given pipeline enables the pre_enable_prev_first flag. Example: - Panel - Bridge 1 - Bridge 2 pre_enable_prev_first - Bridge 3 - Bridge 4 pre_enable_prev_first - Bridge 5 pre_enable_prev_first - Bridge 6 - Encoder In this example Bridge 5 and Bridge 4 have pre_enable_prev_first. The logic looks for a bridge which enabled pre_enable_prev_first flags on each iteration and assigned the previou bridge to next and next to limit pointer if the bridge does enable pre_enable_prev_first flag. If control starts from Bridge 6 then it found next Bridge 5 is pre_enable_prev_first and immediately the next assigned to previous Bridge 6 and limit assignments to next Bridge 6 and call post_enable of Bridge 6 even though the next consecutive Bridge 5 is enabled with pre_enable_prev_first. This clearly misses the logic to find the state of next conducive bridge as everytime the next and limit assigns previous bridge if given bridge enabled pre_enable_prev_first. So, the resulting post_disable bridge order would be, - Encoder, Bridge 6, Bridge 5, Bridge 4, Bridge 3, Bridge 2, Bridge 1, Panel. This patch fixes this by assigning next with previou bridge only if the bridge doesn't enable pre_enable_prev_first flag and the next further assign it to limit. This way we can find the bridge that NOT requested prev to disable last. So, the resulting pre_enable bridge order with fix would be, - Encoder, Bridge 4, Bridge 5, Bridge 6, Bridge 2, Bridge 3, Bridge 1, Panel. Validated the bridge init ordering by incorporating dummy bridges in the sun6i-mipi-dsi pipeline Fixes: 4fb912e5 ("drm/bridge: Introduce pre_enable_prev_first to alter bridge init order") Signed-off-by:
Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by:
-
Andrew Halaney authored
This gets logged out to /sys/kernel/debug/devices_deferred in the -EPROBE_DEFER case and as an error otherwise. The message here provides useful information to the user when troubleshooting why their display is not working in either case, so let's make it output appropriately. Signed-off-by:
Andrew Halaney <ahalaney@redhat.com> Reviewed-by:
Enric Balletbo i Serra <eballetbo@kernel.org> Link: https://lore.kernel.org/r/20240228-tidss-dev-err-probe-v1-1-5482252326d3@redhat.comSigned-off-by:
-
- 04 Mar, 2024 1 commit
-
-
Zhengqiao Xia authored
For MNC207QS1-1 panel, Splash screen occur when switch from VT1 to VT2. The BL_EN signal does not conform to the VESA protocol. BL_EN signal needs to be pulled high after video signal. So add prepare_to_enable to 200ms. [ dianders: Adjusted subject prefix and added Fixes tag ] Fixes: 0547692a ("drm/panel-edp: Add several generic edp panels") Signed-off-by:
Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
- 01 Mar, 2024 16 commits
-
-
Christian König authored
Try to fill up VRAM as well by setting the busy flag on GTT allocations. This fixes the issue that when VRAM was evacuated for suspend it's never filled up again unless the application is restarted. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240229134003.3688-2-christian.koenig@amd.com
-
Christian König authored
Previously we would never try to move a BO into the preferred placements when it ever landed in a busy placement since those were considered compatible. Rework the whole handling and finally unify the idle and busy handling. ttm_bo_validate() is now responsible to try idle placement first and then use the busy placement if that didn't worked. Drawback is that we now always try the idle placement first for each validation which might cause some additional CPU overhead on overcommit. v2: fix kerneldoc warning and coding style v3: take care of XE as well v4: keep the ttm_bo_mem_space functionality as it is for now, only add new handling for ttm_bo_validate as suggested by Thomas v5: fix bug pointed out by Matthew Signed-off-by:Thomas Hellström <thomas.hellstrom@linux.intel.com>
-
Boris Brezillon authored
Add an entry for the Panthor driver to the MAINTAINERS file. v6: - Add Maxime's and Heiko's acks v4: - Add Steve's R-b v3: - Add bindings document as an 'F:' line. - Add Steven and Liviu as co-maintainers. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Steven Price <steven.price@arm.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240229162230.2634044-15-boris.brezillon@collabora.com
-
Liviu Dudau authored
Arm has introduced a new v10 GPU architecture that replaces the Job Manager interface with a new Command Stream Frontend. It adds firmware driven command stream queues that can be used by kernel and user space to submit jobs to the GPU. Add the initial schema for the device tree that is based on support for RK3588 SoC. The minimum number of clocks is one for the IP, but on Rockchip platforms they will tend to expose the semi-independent clocks for better power management. v6: - Add Maxime's and Heiko's acks v5: - Move the opp-table node under the gpu node v4: - Fix formatting issue v3: - Cleanup commit message to remove redundant text - Added opp-table property and re-ordered entries - Clarified power-domains and power-domain-names requirements for RK3588. - Cleaned up example Note: power-domains and power-domain-names requirements for other platforms are still work in progress, hence the bindings are left incomplete here. v2: - New commit Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Conor Dooley <conor+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Boris Brezillon authored
Now that all blocks are available, we can add/update Kconfig/Makefile files to allow compilation. v6: - Add Maxime's and Heiko's acks - Keep source files alphabetically ordered in the Makefile v4: - Add Steve's R-b v3: - Add a dep on DRM_GPUVM - Fix dependencies in Kconfig - Expand help text to (hopefully) describe which GPUs are to be supported by this driver and which are for panfrost. Co-developed-by:
-
Boris Brezillon authored
This is the last piece missing to expose the driver to the outside world. This is basically a wrapper between the ioctls and the other logical blocks. v6: - Add Maxime's and Heiko's acks - Return a page-aligned BO size to userspace - Keep header inclusion alphabetically ordered v5: - Account for the drm_exec_init() prototype change - Include platform_device.h v4: - Add an ioctl to let the UMD query the VM state - Fix kernel doc - Let panthor_device_init() call panthor_device_init() - Fix cleanup ordering in the panthor_init() error path - Add Steve's and Liviu's R-b v3: - Add acks for the MIT/GPL2 relicensing - Fix 32-bit support - Account for panthor_vm and panthor_sched changes - Simplify the resv preparation/update logic - Use a linked list rather than xarray for list of signals. - Simplify panthor_get_uobj_array by returning the newly allocated array. - Drop the "DOC" for job submission helpers and move the relevant comments to panthor_ioctl_group_submit(). - Add helpers sync_op_is_signal()/sync_op_is_wait(). - Simplify return type of panthor_submit_ctx_add_sync_signal() and panthor_submit_ctx_get_sync_signal(). - Drop WARN_ON from panthor_submit_ctx_add_job(). - Fix typos in comments. Co-developed-by:
-
Boris Brezillon authored
This is the piece of software interacting with the FW scheduler, and taking care of some scheduling aspects when the FW comes short of slots scheduling slots. Indeed, the FW only expose a few slots, and the kernel has to give all submission contexts, a chance to execute their jobs. The kernel-side scheduler is timeslice-based, with a round-robin queue per priority level. Job submission is handled with a 1:1 drm_sched_entity:drm_gpu_scheduler, allowing us to delegate the dependency tracking to the core. All the gory details should be documented inline. v6: - Add Maxime's and Heiko's acks - Make sure the scheduler is initialized before queueing the tick work in the MMU fault handler - Keep header inclusion alphabetically ordered v5: - Fix typos - Call panthor_kernel_bo_destroy(group->syncobjs) unconditionally - Don't move the group to the waiting list tail when it was already waiting for a different syncobj - Fix fatal_queues flagging in the tiler OOM path - Don't warn when more than one job timesout on a group - Add a warning message when we fail to allocate a heap chunk - Add Steve's R-b v4: - Check drmm_mutex_init() return code - s/drm_gem_vmap_unlocked/drm_gem_vunmap_unlocked/ in panthor_queue_put_syncwait_obj() - Drop unneeded WARN_ON() in cs_slot_sync_queue_state_locked() - Use atomic_xchg() instead of atomic_fetch_and(0) - Fix typos - Let panthor_kernel_bo_destroy() check for IS_ERR_OR_NULL() BOs - Defer TILER_OOM event handling to a separate workqueue to prevent deadlocks when the heap chunk allocation is blocked on mem-reclaim. This is just a temporary solution, until we add support for non-blocking/failable allocations - Pass the scheduler workqueue to drm_sched instead of instantiating a separate one (no longer needed now that heap chunk allocation happens on a dedicated wq) - Set WQ_MEM_RECLAIM on the scheduler workqueue, so we can handle job timeouts when the system is under mem pressure, and hopefully free up some memory retained by these jobs v3: - Rework the FW event handling logic to avoid races - Make sure MMU faults kill the group immediately - Use the panthor_kernel_bo abstraction for group/queue buffers - Make in_progress an atomic_t, so we can check it without the reset lock held - Don't limit the number of groups per context to the FW scheduler capacity. Fix the limit to 128 for now. - Add a panthor_job_vm() helper - Account for panthor_vm changes - Add our job fence as DMA_RESV_USAGE_WRITE to all external objects (was previously DMA_RESV_USAGE_BOOKKEEP). I don't get why, given we're supposed to be fully-explicit, but other drivers do that, so there must be a good reason - Account for drm_sched changes - Provide a panthor_queue_put_syncwait_obj() - Unconditionally return groups to their idle list in panthor_sched_suspend() - Condition of sched_queue_{,delayed_}work fixed to be only when a reset isn't pending or in progress. - Several typos in comments fixed. Co-developed-by: -
Boris Brezillon authored
Tiler heap growing requires some kernel driver involvement: when the tiler runs out of heap memory, it will raise an exception which is either directly handled by the firmware if some free heap chunks are available in the heap context, or passed back to the kernel otherwise. The heap helpers will be used by the scheduler logic to allocate more heap chunks to a heap context, when such a situation happens. Heap context creation is explicitly requested by userspace (using the TILER_HEAP_CREATE ioctl), and the returned context is attached to a queue through some command stream instruction. All the kernel does is keep the list of heap chunks allocated to a context, so they can be freed when TILER_HEAP_DESTROY is called, or extended when the FW requests a new chunk. v6: - Add Maxime's and Heiko's acks v5: - Fix FIXME comment - Add Steve's R-b v4: - Rework locking to allow concurrent calls to panthor_heap_grow() - Add a helper to return a heap chunk if we couldn't pass it to the FW because the group was scheduled out v3: - Add a FIXME for the heap OOM deadlock - Use the panthor_kernel_bo abstraction for the heap context and heap chunks - Drop the panthor_heap_gpu_ctx struct as it is opaque to the driver - Ensure that the heap context is aligned to the GPU cache line size - Minor code tidy ups Co-developed-by:
-
Boris Brezillon authored
Contains everything that's FW related, that includes the code dealing with the microcontroller unit (MCU) that's running the FW, and anything related to allocating memory shared between the FW and the CPU. A few global FW events are processed in the IRQ handler, the rest is forwarded to the scheduler, since scheduling is the primary reason for the FW existence, and also the main source of FW <-> kernel interactions. v6: - Add Maxime's and Heiko's acks - Keep header inclusion alphabetically ordered v5: - Fix typo in GLB_PERFCNT_SAMPLE definition - Fix unbalanced panthor_vm_idle/active() calls - Fallback to a slow reset when the fast reset fails - Add extra information when reporting a FW boot failure v4: - Add a MODULE_FIRMWARE() entry for gen 10.8 - Fix a wrong return ERR_PTR() in panthor_fw_load_section_entry() - Fix typos - Add Steve's R-b v3: - Make the FW path more future-proof (Liviu) - Use one waitqueue for all FW events - Simplify propagation of FW events to the scheduler logic - Drop the panthor_fw_mem abstraction and use panthor_kernel_bo instead - Account for the panthor_vm changes - Replace magic number with 0x7fffffff with ~0 to better signify that it's the maximum permitted value. - More accurate rounding when computing the firmware timeout. - Add a 'sub iterator' helper function. This also adds a check that a firmware entry doesn't overflow the firmware image. - Drop __packed from FW structures, natural alignment is good enough. - Other minor code improvements. Co-developed-by:
-
Boris Brezillon authored
MMU and VM management is related and placed in the same source file. Page table updates are delegated to the io-pgtable-arm driver that's in the iommu subsystem. The VM management logic is based on drm_gpuva_mgr, and is assuming the VA space is mostly managed by the usermode driver, except for a reserved portion of this VA-space that's used for kernel objects (like the heap contexts/chunks). Both asynchronous and synchronous VM operations are supported, and internal helpers are exposed to allow other logical blocks to map their buffers in the GPU VA space. There's one VM_BIND queue per-VM (meaning the Vulkan driver can only expose one sparse-binding queue), and this bind queue is managed with a 1:1 drm_sched_entity:drm_gpu_scheduler, such that each VM gets its own independent execution queue, avoiding VM operation serialization at the device level (things are still serialized at the VM level). The rest is just implementation details that are hopefully well explained in the documentation. v6: - Add Maxime's and Heiko's acks - Add Steve's R-b - Adjust the TRANSCFG value to account for SW VA space limitation on 32-bit systems - Keep header inclusion alphabetically ordered v5: - Fix a double panthor_vm_cleanup_op_ctx() call - Fix a race between panthor_vm_prepare_map_op_ctx() and panthor_vm_bo_put() - Fix panthor_vm_pool_destroy_vm() kernel doc - Fix paddr adjustment in panthor_vm_map_pages() - Fix bo_offset calculation in panthor_vm_get_bo_for_va() v4: - Add an helper to return the VM state - Check drmm_mutex_init() return code - Remove the VM from the AS reclaim list when panthor_vm_active() is called - Count the number of active VM users instead of considering there's at most one user (several scheduling groups can point to the same vM) - Pre-allocate a VMA object for unmap operations (unmaps can trigger a sm_step_remap() call) - Check vm->root_page_table instead of vm->pgtbl_ops to detect if the io-pgtable is trying to allocate the root page table - Don't memset() the va_node in panthor_vm_alloc_va(), make it a caller requirement - Fix the kernel doc in a few places - Drop the panthor_vm::base offset constraint and modify panthor_vm_put() to explicitly check for a NULL value - Fix unbalanced vm_bo refcount in panthor_gpuva_sm_step_remap() - Drop stale comments about the shared_bos list - Patch mmu_features::va_bits on 32-bit builds to reflect the io_pgtable limitation and let the UMD know about it v3: - Add acks for the MIT/GPL2 relicensing - Propagate MMU faults to the scheduler - Move pages pinning/unpinning out of the dma_signalling path - Fix 32-bit support - Rework the user/kernel VA range calculation - Make the auto-VA range explicit (auto-VA range doesn't cover the full kernel-VA range on the MCU VM) - Let callers of panthor_vm_alloc_va() allocate the drm_mm_node (embedded in panthor_kernel_bo now) - Adjust things to match the latest drm_gpuvm changes (extobj tracking, resv prep and more) - Drop the per-AS lock and use slots_lock (fixes a race on vm->as.id) - Set as.id to -1 when reusing an address space from the LRU list - Drop misleading comment about page faults - Remove check for irq being assigned in panthor_mmu_unplug() Co-developed-by:
-
Boris Brezillon authored
Every thing related to devfreq in placed in panthor_devfreq.c, and helpers that can be called by other logical blocks are exposed through panthor_devfreq.h. This implementation is loosely based on the panfrost implementation, the only difference being that we don't count device users, because the idle/active state will be managed by the scheduler logic. v6: - Add Maxime's and Heiko's acks - Keep header inclusion alphabetically ordered v4: - Add Clément's A-b for the relicensing v3: - Add acks for the MIT/GPL2 relicensing v2: - Added in v2 Cc: Clément Péron <peron.clem@gmail.com> # MIT+GPL2 relicensing Reviewed-by:
-
Boris Brezillon authored
Anything relating to GEM object management is placed here. Nothing particularly interesting here, given the implementation is based on drm_gem_shmem_object, which is doing most of the work. v6: - Add Maxime's and Heiko's acks - Return a page-aligned BO size to userspace when creating a BO - Keep header inclusion alphabetically ordered v5: - Add Liviu's and Steve's R-b v4: - Force kernel BOs to be GPU mapped - Make panthor_kernel_bo_destroy() robust against ERR/NULL BO pointers to simplify the call sites v3: - Add acks for the MIT/GPL2 relicensing - Provide a panthor_kernel_bo abstraction for buffer objects managed by the kernel (will replace panthor_fw_mem and be used everywhere we were using panthor_gem_create_and_map() before) - Adjust things to match drm_gpuvm changes - Change return of panthor_gem_create_with_handle() to int Co-developed-by:
-
Boris Brezillon authored
Handles everything that's not related to the FW, the MMU or the scheduler. This is the block dealing with the GPU property retrieval, the GPU block power on/off logic, and some global operations, like global cache flushing. v6: - Add Maxime's and Heiko's acks v5: - Fix GPU_MODEL() kernel doc - Fix test in panthor_gpu_block_power_off() - Add Steve's R-b v4: - Expose CORE_FEATURES through DEV_QUERY v3: - Add acks for the MIT/GPL2 relicensing - Use macros to extract GPU ID info - Make sure we reset clear pending_reqs bits when wait_event_timeout() times out but the corresponding bit is cleared in GPU_INT_RAWSTAT (can happen if the IRQ is masked or HW takes to long to call the IRQ handler) - GPU_MODEL now takes separate arch and product majors to be more readable. - Drop GPU_IRQ_MCU_STATUS_CHANGED from interrupt mask. - Handle GPU_IRQ_PROTM_FAULT correctly (don't output registers that are not updated for protected interrupts). - Minor code tidy ups Cc: Alexey Sheplyakov <asheplyakov@basealt.ru> # MIT+GPL2 relicensing Co-developed-by:
-
Boris Brezillon authored
The panthor driver is designed in a modular way, where each logical block is dealing with a specific HW-block or software feature. In order for those blocks to communicate with each other, we need a central panthor_device collecting all the blocks, and exposing some common features, like interrupt handling, power management, reset, ... This what this panthor_device logical block is about. v6: - Add Maxime's and Heiko's acks - Keep header inclusion alphabetically ordered v5: - Suspend the MMU/GPU blocks if panthor_fw_resume() fails in panthor_device_resume() - Move the pm_runtime_use_autosuspend() call before drm_dev_register() - Add Liviu's R-b v4: - Check drmm_mutex_init() return code - Fix panthor_device_reset_work() out path - Fix the race in the unplug logic - Fix typos - Unplug blocks when something fails in panthor_device_init() - Add Steve's R-b v3: - Add acks for the MIT+GPL2 relicensing - Fix 32-bit support - Shorten the sections protected by panthor_device::pm::mmio_lock to fix lock ordering issues. - Rename panthor_device::pm::lock into panthor_device::pm::mmio_lock to better reflect what this lock is protecting - Use dev_err_probe() - Make sure we call drm_dev_exit() when something fails half-way in panthor_device_reset_work() - Replace CSF_GPU_LATEST_FLUSH_ID_DEFAULT with a constant '1' and a comment to explain. Also remove setting the dummy flush ID on suspend. - Remove drm_WARN_ON() in panthor_exception_name() - Check pirq->suspended in panthor_xxx_irq_raw_handler() Co-developed-by:
-
Boris Brezillon authored
Those are the registers directly accessible through the MMIO range. FW registers are exposed in panthor_fw.h. v6: - Add Maxime's and Heiko's acks v4: - Add the CORE_FEATURES register (needed for GPU variants) - Add Steve's R-b v3: - Add macros to extract GPU ID info - Formatting changes - Remove AS_TRANSCFG_ADRMODE_LEGACY - it doesn't exist post-CSF - Remove CSF_GPU_LATEST_FLUSH_ID_DEFAULT - Add GPU_L2_FEATURES_LINE_SIZE for extracting the GPU cache line size Co-developed-by:
-
Boris Brezillon authored
Panthor follows the lead of other recently submitted drivers with ioctls allowing us to support modern Vulkan features, like sparse memory binding: - Pretty standard GEM management ioctls (BO_CREATE and BO_MMAP_OFFSET), with the 'exclusive-VM' bit to speed-up BO reservation on job submission - VM management ioctls (VM_CREATE, VM_DESTROY and VM_BIND). The VM_BIND ioctl is loosely based on the Xe model, and can handle both asynchronous and synchronous requests - GPU execution context creation/destruction, tiler heap context creation and job submission. Those ioctls reflect how the hardware/scheduler works and are thus driver specific. We also have a way to expose IO regions, such that the usermode driver can directly access specific/well-isolate registers, like the LATEST_FLUSH register used to implement cache-flush reduction. This uAPI intentionally keeps usermode queues out of the scope, which explains why doorbell registers and command stream ring-buffers are not directly exposed to userspace. v6: - Add Maxime's and Heiko's acks v5: - Fix typo - Add Liviu's R-b v4: - Add a VM_GET_STATE ioctl - Fix doc - Expose the CORE_FEATURES register so we can deal with variants in the UMD - Add Steve's R-b v3: - Add the concept of sync-only VM operation - Fix support for 32-bit userspace - Rework drm_panthor_vm_create to pass the user VA size instead of the kernel VA size (suggested by Robin Murphy) - Typo fixes - Explicitly cast enums with top bit set to avoid compiler warnings in -pedantic mode. - Drop property core_group_count as it can be easily calculated by the number of bits set in l2_present. Co-developed-by:
-
- 29 Feb, 2024 3 commits
-
-
Rohit Visavalia authored
Assert DisplayPort reset signal before deasserting, it is to clear out any registers programmed before booting kernel. Signed-off-by:
Rohit Visavalia <rohit.visavalia@amd.com> Reviewed-by:
Vishal Sagar <vishal.sagar@amd.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240216124043.1226713-1-rohit.visavalia@amd.com
-
Richard Acayan authored
The S6E3FA7 display controller is enabled in every Pixel 3a (non-XL) variant. Add the driver for it, generated by linux-mdss-dsi-panel-driver-generator. There are other panels connected to the same S6E3FA7 display controller, such as the AMS604NL01 panel, which are incompatible with this driver. Name the device tree compatible after the panel model according to iFixit. Link: https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator Link: https://android.googlesource.com/kernel/msm/+/7fda1cd7b64710dafac5f34899611c6d35eb4cd2/arch/arm64/boot/dts/google/dsi-panel-s6e3fa7-1080p-cmd.dtsi Link: https://github.com/msm8953-mainline/linux/blob/v6.6.12-r0/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c Link: https://www.ifixit.com/Guide/Image/meta/muyjtLQTHu6MDkhKSigned-off-by:
Richard Acayan <mailingradian@gmail.com> Reviewed-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240209001639.387374-8-mailingradian@gmail.comSigned-off-by:
Neil Armstrong <neil.armstrong@linaro.org>
-
Richard Acayan authored
The Samsung S6E3FA7 display controller and AMS559NK06 panel are used for the display in Pixel 3a devices. Add the compatible for it. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240209001639.387374-7-mailingradian@gmail.comSigned-off-by:
-
- 28 Feb, 2024 14 commits
-
-
Douglas Anderson authored
If an eDP panel is not powered on then any attempts to talk to it over the DP AUX channel will timeout. Unfortunately these attempts may be quite slow. Userspace can initiate these attempts either via a /dev/drm_dp_auxN device or via the created i2c device. Making the DP AUX drivers timeout faster is a difficult proposition. In theory we could just poll the panel's HPD line in the AUX transfer function and immediately return an error there. However, this is easier said than done. For one thing, there's no hard requirement to hook the HPD line up for eDP panels and it's OK to just delay a fixed amount. For another thing, the HPD line may not be fast to probe. On parade-ps8640 we need to wait for the bridge chip's firmware to boot before we can get the HPD line and this is a slow process. The fact that the transfers are taking so long to timeout is causing real problems. The open source fwupd daemon sometimes scans DP busses looking for devices whose firmware need updating. If it happens to scan while a panel is turned off this scan can take a long time. The fwupd daemon could try to be smarter and only scan when eDP panels are turned on, but we can also improve the behavior in the kernel. Let's let eDP panels drivers specify that a panel is turned off and then modify the common AUX transfer code not to attempt a transfer in this case. Tested-by:
Steev Klimaszewski <steev@kali.org> Reviewed-by:
Hsin-Yi Wang <hsinyi@chromium.org> Tested-by:
Eizan Miyamoto <eizan@chromium.org> Acked-by:
-
Maxime Ripard authored
drmm_connector_init is the preferred function to initialize a drm_connector structure. Let's add a bunch of unit tests for it. Reviewed-by:
Maíra Canal <mcanal@igalia.com> Signed-off-by:
-
Maxime Ripard authored
We're going to need a full-blown, functional, KMS device to test more components of the atomic modesetting infrastructure. Let's add a new helper to create a dumb, mocked, CRTC. By default it will create a CRTC relying only on the default helpers, but drivers are free to deviate from that. Reviewed-by:
-
Maxime Ripard authored
We're going to need a full-blown, functional, KMS device to test more components of the atomic modesetting infrastructure. Let's add a new helper to create a dumb, mocked, primary plane. By default, it will create a linear XRGB8888 plane, using the default helpers. Reviewed-by:
-
Maxime Ripard authored
The mock device we were creating was missing any of the driver-wide helpers. That was fine before since we weren't testing the atomic state path, but we're going to start, so let's use the default implementations. Reviewed-by:
-
Maxime Ripard authored
We have a few functions declared in our kunit helpers header, some of them dereferencing the struct drm_driver. However, we don't include the drm_drv.h header file defining that structure, leading to compilation errors if we don't include both headers. Fixes: d9878031 ("drm/tests: helpers: Allow to pass a custom drm_driver") Reviewed-by:
-
Kunwu Chan authored
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create to simplify the creation of SLAB caches. Signed-off-by:
Kunwu Chan <chentao@kylinos.cn> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240221085558.166774-1-chentao@kylinos.cn
-
Shradha Gupta authored
In function drm_helper_probe_single_connector_modes() when we enable polling again, if it is already uninitialized, a warning is reported. This patch fixes the warning message by checking if poll is initialized before enabling it. Reported-by:
kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202401191128.db8423f1-oliver.sang@intel.comSigned-off-by:
Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by:
-
Shradha Gupta authored
In drm_kms_helper_poll_disable() check if output polling support is initialized before disabling polling. If not flag this as a warning. Additionally in drm_mode_config_helper_suspend() and drm_mode_config_helper_resume() calls, that re the callers of these functions, avoid invoking them if polling is not initialized. For drivers like hyperv-drm, that do not initialize connector polling, if suspend is called without this check, it leads to suspend failure with following stack [ 770.719392] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 770.720592] printk: Suspending console(s) (use no_console_suspend to debug) [ 770.948823] ------------[ cut here ]------------ [ 770.948824] WARNING: CPU: 1 PID: 17197 at kernel/workqueue.c:3162 __flush_work.isra.0+0x212/0x230 [ 770.948831] Modules linked in: rfkill nft_counter xt_conntrack xt_owner udf nft_compat crc_itu_t nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink vfat fat mlx5_ib ib_uverbs ib_core mlx5_core intel_rapl_msr intel_rapl_common kvm_amd ccp mlxfw kvm psample hyperv_drm tls drm_shmem_helper drm_kms_helper irqbypass pcspkr syscopyarea sysfillrect sysimgblt hv_balloon hv_utils joydev drm fuse xfs libcrc32c pci_hyperv pci_hyperv_intf sr_mod sd_mod cdrom t10_pi sg hv_storvsc scsi_transport_fc hv_netvsc serio_raw hyperv_keyboard hid_hyperv crct10dif_pclmul crc32_pclmul crc32c_intel hv_vmbus ghash_clmulni_intel dm_mirror dm_region_hash dm_log dm_mod [ 770.948863] CPU: 1 PID: 17197 Comm: systemd-sleep Not tainted 5.14.0-362.2.1.el9_3.x86_64 #1 [ 770.948865] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022 [ 770.948866] RIP: 0010:__flush_work.isra.0+0x212/0x230 [ 770.948869] Code: 8b 4d 00 4c 8b 45 08 89 ca 48 c1 e9 04 83 e2 08 83 e1 0f 83 ca 02 89 c8 48 0f ba 6d 00 03 e9 25 ff ff ff 0f 0b e9 4e ff ff ff <0f> 0b 45 31 ed e9 44 ff ff ff e8 8f 89 b2 00 66 66 2e 0f 1f 84 00 [ 770.948870] RSP: 0018:ffffaf4ac213fb10 EFLAGS: 00010246 [ 770.948871] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8c992857 [ 770.948872] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff9aad82b00330 [ 770.948873] RBP: ffff9aad82b00330 R08: 0000000000000000 R09: ffff9aad87ee3d10 [ 770.948874] R10: 0000000000000200 R11: 0000000000000000 R12: ffff9aad82b00330 [ 770.948874] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 [ 770.948875] FS: 00007ff1b2f6bb40(0000) GS:ffff9aaf37d00000(0000) knlGS:0000000000000000 [ 770.948878] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 770.948878] CR2: 0000555f345cb666 CR3: 00000001462dc005 CR4: 0000000000370ee0 [ 770.948879] Call Trace: [ 770.948880] <TASK> [ 770.948881] ? show_trace_log_lvl+0x1c4/0x2df [ 770.948884] ? show_trace_log_lvl+0x1c4/0x2df [ 770.948886] ? __cancel_work_timer+0x103/0x190 [ 770.948887] ? __flush_work.isra.0+0x212/0x230 [ 770.948889] ? __warn+0x81/0x110 [ 770.948891] ? __flush_work.isra.0+0x212/0x230 [ 770.948892] ? report_bug+0x10a/0x140 [ 770.948895] ? handle_bug+0x3c/0x70 [ 770.948898] ? exc_invalid_op+0x14/0x70 [ 770.948899] ? asm_exc_invalid_op+0x16/0x20 [ 770.948903] ? __flush_work.isra.0+0x212/0x230 [ 770.948905] __cancel_work_timer+0x103/0x190 [ 770.948907] ? _raw_spin_unlock_irqrestore+0xa/0x30 [ 770.948910] drm_kms_helper_poll_disable+0x1e/0x40 [drm_kms_helper] [ 770.948923] drm_mode_config_helper_suspend+0x1c/0x80 [drm_kms_helper] [ 770.948933] ? __pfx_vmbus_suspend+0x10/0x10 [hv_vmbus] [ 770.948942] hyperv_vmbus_suspend+0x17/0x40 [hyperv_drm] [ 770.948944] ? __pfx_vmbus_suspend+0x10/0x10 [hv_vmbus] [ 770.948951] dpm_run_callback+0x4c/0x140 [ 770.948954] __device_suspend_noirq+0x74/0x220 [ 770.948956] dpm_noirq_suspend_devices+0x148/0x2a0 [ 770.948958] dpm_suspend_end+0x54/0xe0 [ 770.948960] create_image+0x14/0x290 [ 770.948963] hibernation_snapshot+0xd6/0x200 [ 770.948964] hibernate.cold+0x8b/0x1fb [ 770.948967] state_store+0xcd/0xd0 [ 770.948969] kernfs_fop_write_iter+0x124/0x1b0 [ 770.948973] new_sync_write+0xff/0x190 [ 770.948976] vfs_write+0x1ef/0x280 [ 770.948978] ksys_write+0x5f/0xe0 [ 770.948979] do_syscall_64+0x5c/0x90 [ 770.948981] ? syscall_exit_work+0x103/0x130 [ 770.948983] ? syscall_exit_to_user_mode+0x12/0x30 [ 770.948985] ? do_syscall_64+0x69/0x90 [ 770.948986] ? do_syscall_64+0x69/0x90 [ 770.948987] ? do_user_addr_fault+0x1d6/0x6a0 [ 770.948989] ? do_syscall_64+0x69/0x90 [ 770.948990] ? exc_page_fault+0x62/0x150 [ 770.948992] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 770.948995] RIP: 0033:0x7ff1b293eba7 [ 770.949010] Code: 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 770.949011] RSP: 002b:00007ffde3912128 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 770.949012] RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007ff1b293eba7 [ 770.949013] RDX: 0000000000000005 RSI: 00007ffde3912210 RDI: 0000000000000004 [ 770.949014] RBP: 00007ffde3912210 R08: 000055d7dd4c9510 R09: 00007ff1b29b14e0 [ 770.949014] R10: 00007ff1b29b13e0 R11: 0000000000000246 R12: 0000000000000005 [ 770.949015] R13: 000055d7dd4c53e0 R14: 0000000000000005 R15: 00007ff1b29f69e0 [ 770.949016] </TASK> [ 770.949017] ---[ end trace e6fa0618bfa2f31d ]--- Built-on: Rhel9, Ubuntu22 Signed-off-by:
-
Thierry Reding authored
The drm_num_crtcs() helper determines the number of CRTCs by iterating over the list of CRTCs that have been registered with the mode config. However, we already keep track of that number in the mode config's num_crtcs field, so we can simply retrieve the value from that and remove the extra helper function. Signed-off-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
-
Thomas Zimmermann authored
Include mutex.h, printk.h and types.h, remove several unnecessary include statements, and sort the list alphabetically. Signed-off-by:
Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240219093941.3684-10-tzimmermann@suse.de
-
Thomas Zimmermann authored
Add forward declarations for struct i2c_adapter and struct module, and sort the list alphabetically. Signed-off-by:
-
Thomas Zimmermann authored
Forward declare struct page and remove the include statement. Signed-off-by:
-
Thomas Zimmermann authored
Forward declare struct notifier_block and remove the include statement. Signed-off-by:
-
